PONA2114-1-AC-FC-03 [EMCORE]

Erbium Doped Fiber Amplifier (EDFA); 掺铒光纤放大器（ EDFA ）


型号：	PONA2114-1-AC-FC-03
厂家：	EMCORE CORPORATION
描述：	Erbium Doped Fiber Amplifier (EDFA) 掺铒光纤放大器（ EDFA ）光纤光纤放大器 PC
文件：	总4页 (文件大小：481K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

PONA 2100 Series

DATASHEET | JANUARY 2012

FIBER OPTICS

PONA 2100 Series Erbium Doped Fiber Amplifier

The EMCORE PONA 2100 Series Erbium Doped Fiber Amplifier (EDFA) is an

ideal building block for OEM system integrators. The family of PONA 2100 series

EDFA’s is designed to meet the most demanding noise performance requirements

of CATV applications, and performs all the functions required of an optical

amplifier for system integration. PONA 2100 series EDFA’s provide optical

isolation on the input and output of the gain block for stable, low noise operation.

The input and output optical signal power levels are detected for monitoring and

control. The input optical signal is amplified with active gain control for a constant

output power level, or with active output power control for constant gain mode.

The PONA 2100 series EDFA’s also provide monitors and associated alarms for

all vital characteristics. The optical output of the PONA 2100 series EDFA’s can

be split into multiple ports by an optional external splitter.

Applications

High Performance Supertrunking Links

High Power Distribution Networks

Redundanct Ring Architectures

FTTx Networks.

Features

Full Functionality 1 RU EDFA

Low Noise Figure (Typ < 5.5 dB)

General and Mechanical Specifications

Total Input Power Range: -10 dBm to

+12 dBM

Property

Requirement

Comments

PONA 2114 – PONA2127

1532 ~ 1565 nm

1545 ~ 1565 nm

Operating Wavelength

+14 dBm to +30 dBm Output Power

Optional Internal Optical Power Splitters

Standard RS-232 Communications

PONA 2130

Standard

Operating Case Temperature

Storage Temperature

Operating Humidity

-10C to 55C

-40C to 85C

20% to 85%

Standard

Non-condensing

Standard SNMP Communication

(coming soon)

100 VAC to 240 VAC 50/60 Hz

-36 to –60 V DC

Standard

Optional

Voltage Supply Range

SC/APC; SC/UPC; FC/APC;

FC/UPC; E2000/APC

Optical Connectors

User Specified

Key Lock Switch

Standard and Optional Gain Flatness

(1530 nm – 1562 nm)

Dimensions in Inches

19.0”W x 14.76”D x 1.72”H

19” Rack Mounted, 1U

VFD Panel Status Indicator

Low Electrical Power Consumption

Input/Output Isolation >40/40 dB

Polarization Dependant Gain < 0.1 dB

Polarization Mode Dispersion < 0.5 ps

REV 2012.01

Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.

PONA 2100 Series

DATASHEET | JANUARY 2012

FIBER OPTICS

Optical/Electrical Characteristics¹

Symbol

(Units)

Property

Limit

PONA Models

Comments

2114

2117

2120

2122

2124

2127

2130

Operating Input Power

Pin (dBm)

Max

Min

+12

Typical

(May vary for

some models)

-10

14.0

17.0

20.0

22.0

24.0

27.0

30.0

Output Power

Noise Figure

Po (dBm)

NF (dB)

(Note 2)

+/-.25

+/- .25

Typ/Ma

4.5/5.0

5.0/5.5

5.5/6.0

(Notes 3, 8)

Static Gain Flatness

Dynamic Gain Flatness

Output Power Stability

GF (dB)

(dB)

Max

+/-0.5

+/-1

+/-0.5

+/-1.25

+/- 0.2

+/-0.5

+/-1.5

+/- 0.2

+/-0.5

+/-2.0

+/- 0.2

+/-0.5

+/-2.0

+/- 0.2

+/-0.5

+/-2.0

+/- 0.2

(Note 7)

+/- 0.2

(Note 4)

(Notes 5, 8)

(Note 6)

(dB)

+/- 0.2

Power Consumption

(steady state regime)

Psys (W)

Max

50^oC Case

Notes^:

1. Unless stated otherwise, all specifications apply over the full operating temperature and humidity ranges

2. Measurement variations

3. Measured with 8 evenly spread input optical signals @ 25°C, Pin ≈ 0 dBm (Measuring with 1 input optical signal with Pin ≈ 0 dBm

and  ≈ 1550 nm is also possible. (Low Noise Figure options with NF ≤ 4.0/4.5 dB are available for some models)

4. Measured with a swept Probe Signal (Pp), where Pp ≈ 0 dBm @ 25C

5. Measured with a swept Probe Signal (Pp), and a fixed Tone Signal (Pt) @ ~ 1550 nm; (Pt ≈ Pp+20 dB; Pt + Pp ≈ 0 dBm) @ 25C;

Gain Flattened Options with ΔG ≤ +/-1.0dB are available (for some models)

6. Over polarization and temperature

7. Static and Dynamic Gain Flatness for PONA 2130 can be defined for 1545 nm ≤  ≤1562 nm and by special request only.

8. Specific NF and ΔG can be guaranteed at a single specified Input Optical Power Level (Pin = Pt + Pp) equal or different from 0 dBm.

(Please contact your Sales Representative for more information)

REV 2012.01

Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.

PONA 2100 Series

DATASHEET | JANUARY 2012

FIBER OPTICS

Outline Drawing

AC versions shown below with 8-port option

DC versions shown below with 8-port option

Compliance Information

89/336/EEC

73/23/EEC

EN 50083-2, (2001)

Electromagnetic Compatibility Directive, amended by 92/31/EEC & 93/68/EEC

Low Voltage Directive, amended by 93/68/EEC

Cable networks for TV signals, sounds and interactive services, Part 2

Electromagnetic Compatibility for equipment.

Mains Conducted Emissions

EN 55013

EN 61000-3-2

EN 55020

Mains Frequency and its Harmonics, Conducted Emissions

Radiation from Active Equipment, Radiated Immunity

Immunity of Active Equipment, Radiated Immunity

Electrostatic Discharge Immunity

EN 61000-4-6

EN 61000-4-3

EN 61000-4-2

EN 61000-4-4

EN 60950

Electrical Fast Transient / Burst Immunity

Low Voltage Directives

EN 60825-1

EN 60825-2

CDRH

Laser Safety Requirement

Fit Rate:

90% level of confidence < 1700 @ 30C (PONA 2130)

REV 2012.01

Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.

PONA 2100 Series

DATASHEET | JANUARY 2012

FIBER OPTICS

Ordering Information

PONA 21

Optical Output

Power

Output

Ports

Input Voltage

Connector

GFF/ NF Options

14 - 14 dBm

17 - 17 dBm

20 - 20 dBm

AC – 90-260V 50/60 Hz

DC – 48 V

SC – SC/APC (Default Option)

00 - Standard

FC - FC/APC (Default Option)

EC - E2000/APC

01 – Gain Flattened Option

02 - Low NF Option

2DC – Redundant 48 V

TC - SC/UPC

GC - FC/UPC

03 – Gain Flattened AND Low

22 - 22 dBm

NF Option

24 - 24 dBm

27 - 27 dBm

30 - 30 dBm

Notes:

1. For ordering PONA preamplifiers please contact your Sales Representative

2. Only some models can be order with Gain Flattened and/or Low NF options. (-01, -02, and –03 suffixes). Please contact your

Emcore Sales Representative for details

Laser Safety Information

This product meets the applicable requirements of 21 CFR 1010 & 1040 and is classified as a Class IV laser product based

on the maximum optical output power shown below. During use as intended, the laser energy is fully contained within the

fiber network such that there is no accessible laser radiation and would meet the requirements for a Class I laser product.

The laser product report has been submitted to the CDRH and the accession number is expected by October 2006.

Wavelength = 1530 ~ 1561 nm (dependant on input source)

Maximum Output Power = 1.0 W (single output, 30 dBm model)

REV 2012.01

Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.

相关型号：