PONA3027-SCDPLX-64-P-DC [EMCORE]

Full Function High Power Fiber Optic Amplifier;


型号：	PONA3027-SCDPLX-64-P-DC
厂家：	EMCORE CORPORATION
描述：	Full Function High Power Fiber Optic Amplifier
文件：	总6页 (文件大小：563K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

PONA 3000 Series

DATASHEET | JANUARY 2012

FIBER OPTICS

PONA 3000 Series Erbium Doped Fiber Amplifier

The EMCORE PONA 3000 Series Fiber Optical Amplifier Module is an ideal

building block for OEM system integrators. The family of PONA 3000 Optical

Amplifiers is designed to meet the most demanding noise performance

requirements of CATV and FTTx applications, and performs all the functions

required of an optical amplifier for system integration. PONA 3000 series

optical amplifiers provide optical isolation on the input and output of the gain

block for stable, low noise operation. The input and output optical signal

power levels are detected for monitoring and control. The input optical signal

is amplified with active gain control for a constant output power level, or with

active output power control for constant gain mode. The PONA 3000 series

optical amplifiers also provide monitoring functions and associated alarms for

all vital characteristics. The optical output of the PONA 3000 series optical

amplifiers can be split into number of ports by an optional internal splitter.

Applications

High Performance SuperTrunking Links

High Power Distribution Networks

Fiber Deep Architectures

FTTx Networks

Features

Full Function High Power Fiber Optic Amplifier

Low Noise Figure (Typ < 6 dB)

Total Input Power Range: -10 dBm to +12 dBm

Total Ouput Power: +27 dBm to +37 dBm

(Optical Ouput Power Splitter is Optional

for these Units)

PONA3000 series includes AC/DC Power Supply, Front Panel, Optical

Splitters, network card and all necessary connectors.

General and Mechanical Specifications

General Property

Requirement

Comments

Operating Wavelength

1545 ~ 1565nm

Standard

Standard RS-232 communications

Standard SNMP Communication

(coming soon)

Operating Case

Temperature

Storage Temperature

Standard

0C to 50C

Standard

-40C to 85C

Operating Humidity

20% to 85%

Non-condensing

Low Electrical Power Consumption

Input/Output Isolation >40/40 dB

Polarization Dependant Gain < 0.1 dB

Polarization Mode Dispersion < 0.5 ps

Voltage Supply Range

85 VAC to 265 VAC 50/60 Hz

-36 to –60 V DC

AC version

DC version

*(Redundant Power Supply is

available by Customer

request

Optical Connectors

See ordering information

19.0”W x 14.76”D x 3.44”H

User Specified

Dimensions In Inches

19’’ Rack Mounted, 2 RU

REV 2012.01

Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.

PONA 3000 Series

DATASHEET | JANUARY 2012

FIBER OPTICS

Performance Specifications¹

Property

Unit

Limit

PONA Models

Comment

3027

+12

3030

+12

3032

+12

3033

+12

3035

+12

3037

+12

Operating Input Power

Output Power

Pin (dBm)

Po (dBm)

NF (dB)

GF (dB)

(dB)

Max

Min

-10

27.0

30.0

32.0

33.0

35.0

37.0

Nominal (note 2)

(note 3)

Noise Figure

Typ/Max

Max

5.5/6.0

+/-2.0

+/-2.50

5.5/6.0

+/-2.0

+/-2.50

5.5/6.0

+/-2.0

+/-2.50

5.5/6.0

+/-2.0

+/-2.50

5.5/6.0

+/-2.0

+/-3.00

5.5/6.0

+/-2.0

+/-3.00

Static Gain Flatness

Dynamic Gain Flatness

(note 4)

Max

(note 5)

Output Power Stability

(dB)

Max

+/- 0.2

(note 6)

Power Consumption

(steady state regime)

50^oC Case (premium)

50^oC Case (economy)

(note7)

Psys (W)

Max

Remnant pump power

to output

Prp (dBm)

Nom.

<-30

Notes:

1. Unless stated otherwise all specifications apply over the full temperature range and humidity

2. Depending on the fiber optic patch cord interface the measured value can vary up to 0.5 dB less than the actual value.

3. Measured @ 25C, Pin = 0 dBm. Can be measured only after splitting output power

4. Measured with a swept Probe Signal (Pp), where Pp = 0 dBm @ 25C

5. Measured with a swept Probe Signal (Pp), and a fixed Tone Signal (Pt) @ 1553nm; (Pt = Pp+20 dB; Pt + Pp = 0 dBm) @

25C;

6. Stability over polarization and temperature

7. Premium version – PONA with cooled, Telecordia qualified pumps

Economy version – PONA with uncooled pumps

Table for Determination of Minimal Output Optical Power per Port (dBm)

Minimum optical power per port (dBm)

PONA Models

Number of ports

3027 3030 3032 3033

3035

3037

23.5

20.2

16.8

13.4

26.5

23.2

19.8

16.4

28.5

25.2

21.8

18.4

29.5

26.2

22.8

19.4

31.5

28.2

24.8

21.4

33.5

30.2

26.8

23.4

10.0

7.0

13.0

10.0

15.0

12.0

16.0

13.0

18.0

15.0

20.0

17.0

REV 2012.01

Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.

PONA 3000 Series

DATASHEET | JANUARY 2012

FIBER OPTICS

Block Diagram: Cladding Pump Technology

Cladding pump technology uses erbium/ytterbium fiber optic assemblies (double clad fiber and multi-mode pump lasers) to

produce cost effective high power optical amplification. This technology enables the development of higher power EDFAs-

something that was cost inhibitor when using standard Erbium fiber and single mode pumps.

Er/Yb Assembly

Input

Hybrid

Filter / Isolator

Isolator

1% Tap

980 nm

pump

Input

monitor

Output

Monitor

Multi-mode

pumps

Drive

Electronics

Sample FTTx Architecture

Splitter

ONT

OLT

Voice

1490nm

Businesses

Data

1310nm

- Voice

- Data

- Video

Splitter

WDM

1550nm

ONT

1550nm

Multi

Dwelling Units

Video

20 Km

ONT

EDFA

20 outputs of 20

dBm

Homes

REV 2012.01

Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.

PONA 3000 Series

DATASHEET | JANUARY 2012

FIBER OPTICS

Outline Drawing

AC versions shown below with 8 optical output ports

DC versions shown below with 8 optical output ports

REV 2012.01

Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.

PONA 3000 Series

DATASHEET | JANUARY 2012

Ordering Information

PONA30

FIBER OPTICS

# of Output

Ports

Power Level

Connector Options

Class

Input Voltage

27: 27 dBm

30: 30 dBm

SC: SC/APC

01: 1 port

P: Premium

E: Economy

AC: 90-260 VAC 50/60 Hz

DC: -48 VDC

FC: FC/APC

02: 2 ports

32: 32 dBm

33: 33 dBm

35: 35 dBm

37: 37 dBm

EC: E2000/APC

TC: SC/UPC

04: 4 ports

08: 8 ports

16: 16 ports

GC: FC/UPC

SCDPLX: SC/APC Duplex

20: 20 ports

32: 32 ports

64: 64 ports

Class: Premium: Utilizes cooled pump lasers

Economy: Utilizes uncooled pump lasers

* PONA 3000 series with power higher then 30 dBm per port must have special output optical connector(s) and optical

bulkhead(s). Their type(s) must be verified prior to placing Purchase Order.

Compliance Information

FCC:

Subpart B. Part 15, Class “A” Unintentional Radiators

CE:EN50083-2

EN 61000-4-3

EN 55020

19995 with Amendment 1, which incorporates EN 55013 Radiated and Conducted Emissions

Radiated Immunity

Conducted Immunity

Harmonics

EN 61000-3-2

All Components meet Telecordia GR-1312 and GR-486 Standards (Except Pumps in Economy Class)

Fit Rate:

90% Level of Confidence < 2500 @ 30^OC Premium PONA 3035

90% Level of Confidence < 2000 @ 30^OC Economy PONA 3035

REV 2012.01

Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.

PONA 3000 Series

DATASHEET | JANUARY 2012

FIBER OPTICS

Laser Safety Information

This product meets the applicable requirements of 21 CFR 1010 & 1040 and is classified as a Class IV laser product based

on the maximum optical output power shown below. During use as intended, the laser energy is fully contained within the

fiber network such that there is no accessible laser radiation and would meet the requirements for a Class I laser product.

The laser product report has been submitted to the CDRH and the accession number is expected by October 2006.

Wavelength = 1545 ~ 1562 nm (dependant on input source)

Maximum Output Power = 5 W (single output, 37 dBm model)

REV 2012.01

Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.

相关型号：