PONA3032-EC-02-P-AC [EMCORE]

EDFA Amplifier, 1545nm Min, 1562nm Max, 1dB, E2000/APC Connector, Panel Mount;


型号：	PONA3032-EC-02-P-AC
厂家：	EMCORE CORPORATION
描述：	EDFA Amplifier, 1545nm Min, 1562nm Max, 1dB, E2000/APC Connector, Panel Mount PC
文件：	总6页 (文件大小：339K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

PRELIMINARY DATA SHEET | OCTOBER 28, 2007

PONA 3000 Series Erbium Doped Fiber Amplifier

Applications

•

High Performance Supertrunking Links

High Power Distribution Networks

Fiber Deep Architectures

FTTx Networks

Features

•

Full Function High Power Fiber Optic

Amplifier Ready for Integration

Low Noise Figure (Typ < 6 dB)

Total Input Power Range: –10 dBm to

+12 dBm

•

The ORTEL PONA 3000 Series Fiber Optical Amplifier Module is an

ideal building block for OEM system integrators. The family of PONA

3000 Optical Amplifiers is designed to meet the most demanding

noise performance requirements of CATV and FTTx applications, and

performs all the functions required of an optical amplifier for system

integration. PONA 3000 series optical amplifiers provide optical

isolation on the input and output of the gain block for stable, low noise

operation. The input and output optical signal power levels are

detected for monitoring and control. The input optical signal is

amplified with active gain control for a constant output power level, or

with active output power control for constant gain mode. The PONA

3000 series optical amplifiers also provide monitoring functions and

associated alarms for all vital characteristics. The optical output of the

PONA 3000 series optical amplifiers can be split into number of ports

by an optional internal splitter.

•

Total Output Power: +27 dBm to

+35 dBm (Optical Output Power

Splitter is Optional For These Units)

Standard RS-232 Communications

Low Electrical Power Consumption

Input / Output Isolation > 40/40 dB

Polarization Dependant Gain < 0.1 dB

Polarization Mode Dispersion < 0.5 ps

•

PONA3000 series includes AC/DC power supply, front panel, optical

splitters, network card and all necessary connectors.

1 of 6

For more information on this and other products:

Contact Sales at Emcore 626-293-3400, or visit www.emcore.com.

PONA3000 Series High Power EDFA

PRELIMINARY DATA SHEET | OCTOBER 28, 2007

Specifications

PROPERTY

Product Code

UNIT

LIMIT

PONA MODELS

3030 3032

COMMENT

3027

+12

3035

+12

PERFORMANCE

Operating Input Power

(note 1)

Pin (dBm)

Max

Min

+12

-10

Output Power

Noise Figure

Static Gain Flatness

Po (dBm)

NF (dB)

GF (dB)

27.0

30.0

5.5/6.0

+/-1.0

32.0

5.5/6.0

+/-1.0

35.0

5.5/6.0

+/-1.0

Nominal (note 2)

(note 3)

(note 4)

Typ/Max 5.5/6.0

Max

+/-1.0

Dynamic Gain Flatness

Output Power Stability

(dB)

+/-2.00

+/- 0.25

+/-2.00

+/- 0.25

+/-2.25

+/-0.25

+/-2.50

+/- 0.25

(note 5)

(note 6)

50^oC Case (premium)

50^oC Case (economy)

(note7)

(dB)

Power Consumption

(steady state regime)

Psys (W)

Remnant pump power to output

Prp (dBm)

Nom.

<-30

Notes:

1) Unless stated otherwise all specifications apply over the full temperature range and humidity

2) Depending on the fiber optic patchcord interface the measured value can vary up to 0.5 dB less than the actual value

3) Measured @ 25°C, ΣPin = 0 dBm

4) Measured with a swept Probe Signal (Pp), where Pp = 0 dBm @ 25°C

5) Measured with a swept Probe Signal (Pp), and a fixed Tone Signal (Pt) @ 1553nm; (Pt = Pp+20 dB; Pt + Pp = 0 dBm) @ 25°C

6) Stability over polarization and temperature

7) Premium version – PONA with cooled, Telcordia qualified pumps

Economy version – PONA with uncooled pumps

Physical

GENERAL PROPERTY

REQUIREMENT

COMMENTS

Operating Wavelength

1545 ~ 1562nm

Standard

Operating Case Temperature

Storage Temperature

Operating Humidity

Standard

Non-condensing

AC version

0°C to 50°C

-40°C to 85°C

20% to 85%

Voltage Supply Range

85 VAC to 265 VAC 50/60 Hz

-36 to -60 V DC

DC version

*(Redundant Power Supply is

Available by Customer Request)

Optical Connectors

See ordering information

19.0”W x 14.76”D x 3.44”H

User Specified

Dimensions In Inches

19’’ Rack Mounted, 2 RU

2 of 6

Ortel, a division of EMCORE

2015 West Chestnut Street

Alhambra, California 91803-1542

Tel: 626-293-3400

Fax: 626-293-3428

www.emcore.com

PONA3000 Series High Power EDFA

PRELIMINARY DATA SHEET | OCTOBER 28, 2007

Block Diagram: Cladding Pump Technology

Cladding pump technology uses erbium/ytterbium fiber optic assemblies (double clad fiber and

multi-mode pump lasers) to produce cost effective high power optical amplification. This technology

enables the development of higher power EDFAs-something that is cost prohibitive when using

standard erbium fiber and single mode pumps.

Er/Yb Assembly

Input

Hybrid

Filter / Isolator

Isolator

1% Tap

980 nm

pump

Input

monitor

Output

Monitor

Multi-mode

pumps

Drive

Electronics

Sample FTTx Architecture

Splitter

ONT

OLT

Voice

Data

1490nm

ONT

Businesses

1310nm

- Voice

- Data

- Video

Splitter

20 Km

Splitter

WDM

1550nm

ONT

1550nm

Multi

Dwelling Units

Video

ONT

EDFA

20 outputs of 20

dBm

Homes

3 of 6

Ortel, a division of EMCORE

2015 West Chestnut Street

Alhambra, California 91803-1542

Tel: 626-293-3400

Fax: 626-293-3428

www.emcore.com

PONA3000 Series High Power EDFA

PRELIMINARY DATA SHEET | OCTOBER 28, 2007

Outline Drawing

AC and DC versions shown below with 8-port option

4 of 6

Ortel, a division of EMCORE

2015 West Chestnut Street

Alhambra, California 91803-1542

Tel: 626-293-3400

Fax: 626-293-3428

www.emcore.com

PONA3000 Series High Power EDFA

PRELIMINARY DATA SHEET | OCTOBER 28, 2007

Laser Safety Information

This product meets the applicable requirements of 21 CFR 1010 & 1040 and is classified as a Class IV

laser product based on the maximum optical output power shown below. During use as intended, the

laser energy is fully contained within the fiber network such that there is no accessible laser radiation

and would meet the requirements for a Class I laser product. The laser product report has been

submitted to the CDRH and the accession number is expected by October 2006.

Wavelength = 1545 ~ 1562 nm (dependant on input source)

Maximum Output Power = 3.2 W (single output, 35 dBm model)

5 of 6

Ortel, a division of EMCORE

2015 West Chestnut Street

Alhambra, California 91803-1542

Tel: 626-293-3400

Fax: 626-293-3428

www.emcore.com

PONA3000 Series High Power EDFA

PRELIMINARY DATA SHEET | OCTOBER 28, 2007

Ordering Information

PONA30

Power

Level

Connector

Options

# of Output

Ports

Class

Input Voltage

27: 27 dBm SC: SC/APC

30: 30 dBm FC: FC/APC

01: 1 port

P: Premium

E: Economy

AC: 90-260 VAC 50/60 Hz

DC: -48 VDC

02: 2 ports

04: 4 ports

08: 8 ports

16: 16 ports

20: 20 ports

32: 32 dBm EC: E2000/APC

35: 35 dBm TC: SC/UPC

GC: FC/UPC

2DC: Redundant DC

Class:

Premium: Utilizes cooled pump lasers

Economy: Utilizes uncooled pump lasers

* PONA3000 series with one or two optical outputs will have special high power output optical connector(s) and

optical bulkhead(s)

For exact model number, please contact your Sales Representative.

Qualifications

° FCC: Subpart B. Part 15, class “A” Unintentional Radiators

° CE: EN50083-2, 19995 with Amendment 1, which Incorporates EN 55013 Radiated and

Conducted Emissions

° EN 61000-4-3 Radiated Immunity

° EN 55020 Conducted Immunity

° EN 61000-3-2 Harmonics

° All Components Meet Telcordia GR-1312 and GR-486 Standards (Except Pumps in

Economy Class).

° EN 61000-3-2 Harmonics

° Fit Rate:

• 90% Level of Confidence < 2000 @ 30°C Premium PONA 3035

• 90% Level of Confidence < 3500 @ 30°C Economy PONA 3035

Information contained herein is deemed to be reliable and accurate as of issue date. EMCORE reserves the right to change the design or specifications of

the product at any time without notice. Ortel, the Ortel logo, EMCORE, and the EMCORE logo are trademarks of EMCORE Corporation.

6 of 6

Ortel, a division of EMCORE

2015 West Chestnut Street

Alhambra, California 91803-1542

Tel: 626-293-3400

Fax: 626-293-3428

www.emcore.com

相关型号：