LPT80 [EMERSON-NETWORKPOWER]

Power Factor Correction; 功率因数校正
LPT80
型号: LPT80
厂家: EMERSON NETWORK POWER    EMERSON NETWORK POWER
描述:

Power Factor Correction
功率因数校正

功率因数校正
文件: 总3页 (文件大小:281K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Embedded Power for  
Business-Critical Continuity  
Rev. 05.23.08  
LPT80 Series  
1 of 3  
LPT80 Series  
80 Watts  
RoHS  
Total Power:  
55 - 85 Watts  
Input Voltage: 85-264 Vac  
120-370 Vdc  
# of Outputs:  
Triple  
Electrical Specifications  
Input  
Input range:  
Special Features  
85-264 Vac; 120-300 Vdc  
47-440 Hz  
Frequency:  
• Power Factor Correction  
• EN61000-3-2 compliant  
• Universal input  
• 3” x 5” footprint  
• Remote sense on outputs 1  
(& 2 for LPT81)  
• Power fail and remote inhibit  
• Wide range adjustable on  
outputs 1 (& 2 for LPT81)  
• Built-in Class B EMI filter  
• Overvoltage protection  
• Overload protection  
<18 A peak @ 115 Vac;  
<36 A peak @ 230 Vac,  
cold start @ 25 °C  
Inrush current:  
Input current:  
Efficiency:  
EMI filter:  
1.5 A max. (RMS) @ 115 Vac  
75% typical at full load  
FCC Class B conducted  
CISPR 22 Class B conducted  
EN55022 Class B conducted  
VDE 0878 PT3 Class B conducted  
<1 mA @ 50/60 Hz, 264 Vac input  
Safety ground  
leakage current:  
Output  
Maximum power:  
60 W for convection( LPT81, 55 W);  
85 W with 30 CFM forced air  
Adjustment range:  
3.3 V - 5.5 V on outputs one  
(and two 1.8 V - 3.5 V for LPT81)  
Safety  
Hold-up time:  
20 ms @85 W load, 115 Vac nominal line  
VDE  
UL  
60950  
60950  
60950  
Overload protection: Short circuit protection on all outputs.  
Case overload protected @ 145% above peak rating  
CSA  
Overvoltage protection: Tracks outputs 1( & 2 for LPT81): 20% to 35% above  
output setting  
NEMKO 60950  
AUSTEL 60950  
CB  
CE  
Certificate & report  
Mark LVD  
Embedded Power for  
Business-Critical Continuity  
Rev. 05.23.08  
LPT80 Series  
2 of 3  
Logic Control  
Power failure  
Remote inhibit  
Remote sense  
TTL logic signal goes high 100 - 500 msec after V1 output; It  
goes low at least 4 msec before loss of regulation  
Requires contact closure to inhibit outputs  
Compensates for 0.5 V lead drop min. Will operate without  
remote sense connected. Reverse connection protected.  
Environmental Specifications  
Operating temperature: 0° to 50 °C ambient;  
derate each output at 2.5% per degree from 50° to 70°C  
Temperature coefficient: 0.4% per °C  
Storage temperature:  
-40° to 85 °C  
Electromagnetic  
susceptibility:  
Humidity:  
Designed to meet IEC EN61000-4, -2, -3, -4, -5, -6, -8, -11 Level 3  
Operating; non-condensing 5% to 95%  
Vibration:  
Three orthogonal axes, sweep at 1 oct/min, 5 min. dwell at four  
major resonances 0.75 G peak 5 Hz to 500 Hz, operational  
>550,000 hours at full load and 25 °C ambient conditions  
MTBF demonstrated:  
Ordering Information  
Maximum  
Load with  
Minimum Maximum Load with 30CFM  
Ripple P/P  
Model  
Number Voltage  
Output  
Load  
+3.3 V (1.8 - 3.5 V) 0.7 A  
+5 V (3.3 - 5.5 V)  
+12 V  
1
2
3
Convection Cooling forced Air  
Peak Load Regulation (PARD)  
LPT81  
LPT82  
LPT83  
8.0 A  
4.0 A  
0.7 A  
13 A13 A  
1.0 A  
15 A  
15 A  
1.5 A  
2%  
2%  
5%  
50 mV  
50 mV  
120 mV  
0.3 A  
0
+5 V (3.3 - 5.5 V)  
+12 V  
-12 V  
0.7 A  
0.3 A  
0
8.0 A  
3.0 A  
0.7 A  
13 A  
4.0 A  
1.0 A  
15 A  
4.6 A  
1.5 A  
2%  
5%  
5%  
50 mV  
120 mV  
120 mV  
+5 V (3.3 - 5.5 V)  
+15 V  
-15 V  
0.7 A  
0.3 A  
0
8.0 A  
2.4 A  
0.7 A  
13 A  
3.2 A  
0.7 A  
15 A  
3.7 A  
1 A  
2%  
5%  
5%  
50 mV  
150 mV  
150 mV  
1. Peak current lasting <30 seconds with a maximum 10% duty cycle.  
2. At 25 °C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings.  
3. Peak-to-peak with 20 MHz bandwidth and 10 μF in parallel with a 0.1 μF capacitor at rated line voltage and load  
ranges.  
4. Minimum loads are required  
5. Total current of all outputs can not exceed 21 A.  
Embedded Power for  
Business-Critical Continuity  
Rev. 05.23.08  
LPT80 Series  
3 of 3  
Mechanical Drawing  
Americas  
5810 Van Allen Way  
Carlsbad, CA 92008  
USA  
5.00  
(127.0)  
Telephone: +1 (760) 930 4600  
Facsimile: +1 (760) 930 0698  
0.23 (5.8)  
(4x) .14 (Ø 3.6)  
Europe (UK)  
Waterfront Business Park  
Merry Hill, Dudley  
West Midlands, DY5 1LX  
United Kingdom  
Telephone: +44 (0) 1384 842 211  
Facsimile: +44 (0) 1384 843 355  
1
8
3.00  
(76.2)  
Asia (HK)  
14/F, Lu Plaza  
2 Wing Yip Street  
Kwun Tong, Kowloon  
Hong Kong  
Telephone: +852 2176 3333  
Facsimile: +852 2176 3888  
2.55"  
(64.8)  
5
1
10  
6
For global contact, visit:  
4.56"  
(115.8)  
0.22 (5.6)  
0.22 (5.6)  
www.powerconversion.com  
techsupport.embeddedpower  
@emerson.com  
While every precaution has been taken to ensure  
Mating Connectors  
(SK1)AC Input:  
accuracy and completeness in this literature, Emerson  
Network Power assumes no responsibility, and disclaims  
all liability for damages resulting from use of this  
information or for any errors or omissions.  
Pin Assignments  
Molex 09-50-8031 (USA)  
09-91-0300 (UK)  
PINS: 08-58-0111  
Connector  
SK1 Pin1  
Pin3  
LPT81  
LPT82/83  
Neutral  
Neutral  
Line  
(SK2)DC Outputs:  
Molex 09-50-8081 (USA)  
09-91-0800 (UK)  
PINS: 08-58-0111  
Line  
Emerson Network Power.  
The global leader in enabling  
business-critical continuity.  
SK2 Pin1  
Pin2  
V1 (3.3V)  
V1 (3.3V)  
Common  
Common  
Common  
V2 (5V)  
V2 (5V)  
V3 (12V)  
V1 (5 V)  
V1 (5 V)  
Common  
Common  
Common  
(SK3) Control Signals:  
Pin3  
Molex 90142-0010 (USA)  
PINS: 90119-2110 or  
Amp: 87977-3  
Pin4  
AC Power  
Pin5  
PINS: 87309-8  
Connectivity  
Pin6  
V2 (12/15V)  
V2 (12/15V)  
V3 (-12V/15)  
Astec connector kit:  
Pin7  
#70-841-018  
includes all the above  
DC Power  
Pin8  
Embedded Computing  
Embedded Power  
Monitoring  
SK3 Pin1  
Pin2  
+V1 Remote sense +V1 Remote sense  
-V1 Remote sense -V1 Remote sense  
Notes:  
1.Specifications subject to change without notice.  
2.All dimensions in inches (mm), tolerance is .02”.  
3.Mounting holes M1, M2 and M3 should be  
grounded for EMI purposes.  
4.Mounting hole M1 is safety ground connection.  
5.Specifications are for convection rating at  
factory settings at 115 VAC input, 25°C unless oth-  
erwise stated.  
6.Warranty: 2 year  
Pin3  
+Remote inhibit  
-Remote inhibit  
+Power fail  
+Remote inhibit  
-Remote inhibit  
+Power fail  
Pin4  
Outside Plant  
Pin5  
Power Switching & Controls  
Precision Cooling  
Pin6  
Common  
Common  
Pin7  
No connection  
+V2 sense  
No connection  
No connection  
No connection  
No connection  
Pin8  
Racks & Integrated Cabinets  
Pin9  
-V2 sense  
Services  
Pin10  
No connection  
7.Weight: 0.8 lb. / 0.36 kg  
Surge Protection  
EmersonNetworkPower. com  
Emerson Network Power and the Emerson  
Network Power logo are trademarks and  
service marks of Emerson Electric Co.  
©2008 Emerson Electric Co.  

相关型号:

LPT80A

NPN-Silizium-Fototransistor Silicon NPN Phototransistor
INFINEON

LPT81

80 Watts
ASTEC

LPT81

Power Factor Correction
EMERSON-NETWO

LPT82

80 Watts
ASTEC

LPT82

Power Factor Correction
EMERSON-NETWO

LPT825/18NMOHF

Solutions for Mobile Phone Antennas
PULSE

LPT83

80 Watts
ASTEC

LPT83

Power Factor Correction
EMERSON-NETWO

LPT85

PHOTOTRANSISTOR
INFINEON

LPT85A

PHOTOTRANSISTOR
INFINEON

LPT9033-TR1

NPN SILICON PHOTOTRANSISTOR LED LAMPS
LIGITEK

LPTC

Ultra-Low PDL Fused Tap Coupler
OPLINK