NFS110 [EMERSON-NETWORKPOWER]

Single & Quad output; 单，四路输出


型号：	NFS110
厂家：	EMERSON NETWORK POWER
描述：	Single & Quad output 单，四路输出
文件：	总5页 (文件大小：453K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Embedded Power for

Business-Critical Continuity

Rev. 11.2.09_69

NFS110 Series

1 of 5

NFS110 Series

Single & Quad output

Total Power:

80 - 110 W

Input Voltage: 85 - 264 Vac

120 - 370 Vdc

# of Outputs: Single, quad

Electrical Speciﬁcations

Special Features

• 7.0 x 4.25 x 1.8 inch package

• Overvoltage and short circuit

protection

• 110 W with 20 CFM

• Adjustable outputs

• EN55022, EN55011 conducted

emissions level B

• UL, VDE and CSA safety

approvals

Output

Voltage adjustability:

+5.1 V o/p on multi’s

5.1 V single output

12 V single output

15 V single output

24 V single output

3.0%

12 - 14 V

15 - 18 V

24 - 30 V

Line regulation:

LL to HL, FL

±0.1% max.

All outputs on all units

Overshoot/undershoot:

Temperature coefﬁcient:

Overvoltage protection:

At turn-on

All outputs

• CE mark

• Available RoHS compliant

• 2 year warranty

±0.02%/°C

Multi o/p 5.1 V only

5.1 V single output

12 V single output

15 V single output

24 V single output

6.25 V ± 0.75 V

15.75 V ± 1.0 V

22 V ± 1.5 V

33 V ± 2.5 V

Output power limit:

Primary power limited

Pin max. 160 W

Pout min. 110 W

Minimum output current:

Short circuit protection:

(See Note 13)

0 A

Safety

Burst mode operation

• VDE0805/EN60950/

• IEC950/IEC1010

Input

Input voltage range:

85 - 264 Vac

120 - 370 Vdc

File No. 10401-3336-0213

• Licence No. 4001467 7

• UL1950 File No. E132002

• CSA C22.2 No. 950

File No. LR41062C

Input frequency range:

Input surge current:

47 - 440 Hz

35 A

230 Vac

Safety ground leakage current:

110 Vac, 50 Hz

230 Vac, 50 Hz

0.2 mA, max.

0.4 mA, max.

All speciﬁcations are typical at nominal input, full load at 25 °C unless otherwise stated

Embedded Power for

Business-Critical Continuity

Rev. 11.2.09_69

NFS110 Series

2 of 5

EMC Characteristics

Conducted emissions:

Radiated emissions:

ESD air:

EN55022, FCC part 15

EN61000-4-2, level 3

EN61000-4-2, level 4

EN61000-4-3, level 3

EN61000-4-4, level 3

EN61000-4-5, level 3

EN61000-4-6, level 3

Level B

Level A

Perf. criteria 1

Perf. criteria 2

Perf. criteria 1

ESD contact:

Surge:

Fast transients:

Radiated immunity:

Conducted immunity:

General Speciﬁcations

Hold-up time:

110 Vac @ 80 W

110 Vac @ 110 W

230 Vac @ 80 W

230 Vac @ 100 W

35 ms

17 ms

140 ms

100 ms

Efﬁciency:

Multiple outputs

+5.1 V single

12 V and 15 V singles

24 V single

70% typical

72% typical

75% typical

Isolation voltage:

Input/output

Input/chassis

3000 Vac

1500 Vac

Approvals and standards:

(see note 12)

VDE0805, EN60950, IEC950, IEC1010, UL1950, CSA C22.2 No. 950

Weight:

Singles

Multiple outputs

550 g (19.4 oz)

600 g (21.2 oz)

MTBF (@25 ºC):

MIL-HDBK-217E

125,000 hours min.

Environmental Speciﬁcations

Thermal performance:

Operating ambient

0° C to +70 °C

(See notes 9, 10)

Non-operating

-40 °C to +85 °C

80 W

0 °C to 50 °C convection cooled

+50 °C to +70 °C, convection cooled Derate 2 W/°C

0 °C to +50 °C, 20 CFM forced air

+50 °C to +70 °C, 20CFM forced air

110 W

Derate 2.75 W/°C

Peak, 0 °C to +50 °C, max. 60 seconds 110W

Relative humidity:

Altitude:

Non-condensing

Operating

5 to 95% RH

10,000 feet max.

40,000 feet max.

2.4 G rms peak

Non-operating

5 - 500 Hz

Vibration:

(See Note 11)

Embedded Power for

Business-Critical Continuity

Rev. 11.2.09_69

NFS110 Series

3 of 5

Ordering Information

Output Currents

Peak ⁽²⁾

20 A

Output

Total

Regulation ⁽⁵⁾

Ripple ⁽⁴⁾

Model Numbers ^{(13, 15, F)}

Max ⁽¹⁾

8 A

Fan ⁽³⁾

10 A

5 A

Voltage

NFS110-7601PJ ⁽¹⁴⁾

+5.1 V

+12 V

50 mV

120 mV

50 mV

± 2.0%

± 3.0%

± 2.0%

+10/–5.0%

± 3.0%

± 2.0%

± 4.0%

± 3.0%

± 2.0%

4.5 A

0.5 A

8 A

9 A

–12 V

1.5 A

20 A

1 A

–5 V

1 A

NFS110-7602PJ ^{(6, 14)}

NFS110-7604PJ ⁽¹⁴⁾

+5.1 V (I

)

10 A

4.5 A

5 A

50 mV

+24 V (I ) ⁽⁶⁾

3.5 A

4.5 A

0.5 A

8 A

4.5 A

9 A

240 mV

120 mV

50 mV

+12 V

–12 V

+5.1 V

15 V

1.5 A

20 A

1 A

10 A

5 A

4 A

7.5 A

1.5 A

9 A

150 mV

50 mV

-15 V

-5 V

0.5 A

7 A

1 A

NFS110-7612J ^(7,8)

NFS110-7615J ^(7,8)

NFS110-7624J ^(7,8)

12 V

9 A

120 mV

150 mV

240 mV

15 V

5 A

7.3 A

4.5 A

7.3 A

4.5 A

24 V

3.5 A

Notes

Transient Response

NFS110-7601PJ

Convection cooled, 80 W maximum.

Peak outputs lasting less than 60 seconds with duty cycle less than 10%. Total

peak power must not exceed 110 W.

+5.1 V (7.5 A to 10 A)

+12 V (2.5 A to 5 A)

-12 V (0.5 A to 1 A)

-5 V (0.5 A to 1 A)

150 mV peak, 1 ms recovery

100 mV peak, 0.5 ms recovery

Forced air, 20 CFM at 1 atmosphere, 110 W maximum.

Figure is peak-to-peak. Output ripple is measured across a 50 MHz bandwidth

using a 12 inch twisted pair terminated with a 47 µF capacitor.

Total regulation is deﬁned as the static output regulation at 25 °C, including

initial tolerance, line voltage within stated limits and output voltages adjusted

to their factory settings.

NFS110-7602PJ

NFS110-7604PJ

+5.1 V (7.5 A to 10 A)

+24 V (1.5 A to 3 A)

+12 V (2.5 A to 5 A)

-12 V (0.5 A to 1 A)

150 mV peak, 1 ms recovery

300 mV peak, 1 ms recovery

100 mV peak, 0.5 ms recovery

To achieve stated regulation on the 24 V output on the NFS110-7602PJ, the

following load condition must be true: I / I ≤ 5, where:

= +5.1 V output current, and

= +24 V output current

The +24 V output will maintain ±5.0% regulation under the following

additional condition: I ≤ 5 A.

+5.1 V (7.5 A to 10 A)

+15 V (2.5 A to 5 A)

-15 V (0.5 A to 1 A)

-5 V (0.5 A to 1 A)

150 mV peak, 1 ms recovery

100 mV peak, 0.5 ms recovery

Single output models have ﬂoating outputs which may be referenced as

either positive or negative. Higher voltage supplies may be adjusted over a

wide output voltage range, as long as the total output power does not exceed

80 Watts (natural convection) or 110 Watts (forced air).

Power fail detect not available on single output models.

Derating curve is application speciﬁc for ambient temperatures >50 °C,

for optimum reliability no part of the heatsink should exceed 90 ºC and no

semiconductor case temperature should exceed 100 ºC.

NFS110-7605J

NFS110-7612J:

NFS110-7615J

NFS110-7624J

+5.1 V (10 A to 20 A)

+12 V (4.5 A to 9 A)

+15 V (3.65 A to 7.3 A)

+24 V (2.25 A to 4.5 A)

250 mV peak, 1 ms recovery

360 mV peak, 1 ms recovery

450 mV peak, 1 ms recovery

720 mV peak, 1 ms recovery

10 Caution: Allow a minimum of 1 second after disconnecting the power when

making thermal measurements.

11 Three orthogonal axes, random vibration, 10 minute test for each axis.

12 This product is only for inclusion by professional installers within other

equipment and must not be operated as a stand alone product.

13 Recommend a minimum load of 11 W to achieve the design MTBF. See the

derating curve on page 4.

14 Power failure detec is optional by including the sufﬁx “P” to the model

number.

15 The ‘J’ sufﬁx indicates that these parts are Pb-free (RoHS 6/6) compliant.

16 NOTICE: Some models do not support all options. Please contact your

local Emerson Network Power representative or use the on-line model

number search tool at http://www.PowerConversion.com to ﬁnd a suitable

alternative.

Embedded Power for

Business-Critical Continuity

Rev. 11.2.09_69

NFS110 Series

4 of 5

OPTIONAL POWER FAIL DETECT TIMING DIAGRAM

Power fail detect signal (Note 8)

50ms ≤ T1 ≤ 200ms

T2 will vary with line and load

T3 ≥ 3ms

Pout: 110W

PFD output is an open collector which

will sink ≤ 40mA in the low state.

AC (J1) mating connector

AC INPUT

Molex 09-50-3051 or Molex 09-91-0500 mating connector with 2478

or equivalent crimp terminals.

4.75V

5V OUTPUT

PFD SIGNAL

HIGH

3.5V MIN

DC (J2) mating connector

LOW

Molex 09-50-3131 or Molex 09-91-1300 mating connector with 2478

or equivalent crimp terminals.

0-0.4 MAX

0.475

0.010

(12.07)

DERATING CURVE (See Notes 9, 10)

1.80 (45.72) MAX

1.00 0.005

(25.4)

Output Power (Watts)

110W

80W

20 CFM FORCED AIR COOLING

6-32 UNC

(4PL)

0.050 0.020

(1.27)

1.55 0.005

(39.37)

3.35 0.015 (85.09)

PIN 1

Voltage Adjust

Optional

NATURAL

CONVECTION

COOLING

Power Fail

55W

40W

Detect Circuit

(Key = Pin 2)

4.250

0.020

(107.95)

3.750

Pin 1

0.005

(95.25)

PIN 1

11W

11W MINIMUM LOAD REQUIRED AT 230VAC

0.156

DIA. HOLE

(4PL)

10C

20C

30C

40C

50C

60C

70C

5A, 250 VAC

Pin Connections

0.250

0.010

(6.35)

6.50 0.005 (165.1)

7.00 0.020 (177.8)

-7601PJ

-7602 P

-7604PJ

Singles

Pin 1

Pin 2

Pin 3

AC Ground

AC Neutral

AC Line

AC Ground AC Ground AC Ground

0.250

0.010

(6.35)

ALL DIMENSIONS IN INCHES (mm)

AC Neutral

AC Line

AC Neutral AC Neutral

AC Line

Mechanical Notes:

Metallic or non-metallic stand-offs (maximum diameter 5.4mm) can be used in all four mounting holes

without effecting safety approval.

The ground pad of the mounting hole near J1, allows system grounding through a metal stand-off to

the system chassis.

The heat sink is grounded, and allows system grounding by mechanical connection to the system

chassis.

The supply must be mechanically supported using the PCB mounting holes and may be additionally

supported by the heatsink mounting holes.

It is always advisable to attach the power supply heat sink to another thermal dissipator (such as a

chassis or ﬁnned heatsink etc). The resulting decrease in heat sink mounted component temperatures

will improve power supply lifetime.

A standard L-bracket and cover is available for mounting which contains all screws, connectors and

necessary mounting hardware. The kit is available, order part number “NFS110CJ”.

Pin 1

Pin 2

Pin 3

Pin 4

Pin 5

Pin 6

Pin 7

Pin 8

Pin 9

Pin 10

Pin 11

Pin 12

Pin 13

+5.1 V

Return

+12 V

PFD

+5.1 V

Return

+12 V

PFD

+5.1 V

Return

+15 V

PFD

out

Return

out

N/C

-12 V

-15 V

N/C

Removed for Key

-5 V

+24 V

-5 V

N/C

N/C = no connection

Embedded Power for

Business-Critical Continuity

Rev. 11.2.09_69

NFS110 Series

5 of 5

Americas

5810 Van Allen Way

Carlsbad, CA 92008

USA

Telephone: +1 760 930 4600

Facsimile: +1 760 930 0698

Europe (UK)

Waterfront Business Park

Merry Hill, Dudley

West Midlands, DY5 1LX

United Kingdom

Telephone: +44 (0) 1384 842 211

Facsimile: +44 (0) 1384 843 355

Asia (HK)

14/F, Lu Plaza

2 Wing Yip Street

Kwun Tong, Kowloon

Hong Kong

Telephone: +852 2176 3333

Facsimile: +852 2176 3888

For global contact, visit:

www.PowerConversion.com

techsupport.embeddedpower

@emerson.com

While every precaution has been taken to ensure

accuracy and completeness in this literature, Emerson

Network Power assumes no responsibility, and disclaims

all liability for damages resulting from use of this

information or for any errors or omissions.

Emerson Network Power.

The global leader in enabling

business-critical continuity.

AC Power

Connectivity

DC Power

Embedded Computing

Embedded Power

Monitoring

Outside Plant

Power Switching & Controls

Precision Cooling

Racks & Integrated Cabinets

Services

Surge Protection

EmersonNetworkPower.com

Emerson Network Power and the Emerson

Network Power logo are trademarks and

service marks of Emerson Electric Co.

NFS110 [EMERSON-NETWORKPOWER]

相关型号：

NFS110-7601P

NFS110-7601PJ

NFS110-7602P

NFS110-7602PJ

NFS110-7604P

NFS110-7604PJ

NFS110-7605

NFS110-7605J

NFS110-7612

NFS110-7612J

NFS110-7615

NFS110-7615J