B32356B4106J013 [EPCOS]

Film capacitors - AC capacitors; 薄膜电容器 - 交流电容器


型号：	B32356B4106J013
厂家：	EPCOS
描述：	Film capacitors - AC capacitors 薄膜电容器 - 交流电容器电容器薄膜电容器
文件：	总6页 (文件大小：257K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Film capacitors – AC capacitors

Motor run capacitors

400 V; class A; 85 °C / 450 V; class B; 85 °C

Series/Type:

B32356 – MotorCap P2 Compact

Ordering code:

Date:

Version:

June 2009

3.0

Content of inside pages of data sheet. Data will be automatically entered into headers and footers.

Please fill in the table and then change the colour to “White”. This ensures that the table disappears

for the customer pdf.

Identification/Classification 1:

(header 1)

Film capacitors – AC capacitors

Identification/Classification 2:

(header 2)

Motor run capacitors

Ordering code:

Series/Type:

B32356 – MotorCap P2 Compact

Preliminary data (optional):

(if necessary)

Department:

Date:

FK PC PM AC

June 2009

 EPCOS AG 2009. Reproduction, publication and dissemination of this data sheet, enclosures

hereto and the information contained therein without EPCOS' prior express consent is prohibited.

Film capacitors – AC capacitors

Motor run capacitors

B32356 – MotorCap P2 Compact

Construction

 Dielectric: polypropylene film

 Electrode: segmented metallized film

 Plastic can and top material to IEC 60335-1

 Dry type

Features

 Self-healing properties

 Low dissipation factor

 P2 safety class to IEC 60252-1 2001-02

 High insulation resistance

 Case IP 53 protected

 IEC/EN 60335 compatible

Typical applications

 For general sine wave applications,

mainly as motor run capacitor

Terminals

 Twin core cable type PP 2 × 0.50 mm², 600 V, 95 °C

 Connectors on request

Mounting parts (optional)

 Threaded stud at bottom of can (M8, max. torque = 5 Nm)

 Fast fixation for mounting into a hole of Ø 8 mm

Technical data and specifications

Reference standards

IEC 60252-1 2001-02 / EN 60252 2001

Safety class to IEC 60252-1 2001-02

Life expectancy to IEC 60252 2001

400 V/85 °C: 30000 h (class A)

450 V/85 °C: 10000 h (class B)

See dimensions table

5%, other tolerances upon request

400, 450 V AC

Rated capacitance C_R

Tolerance

Rated voltage V_R

Rated frequency f_R

50/60 Hz

Maximum ratings

Maximum permissible voltage V_max

Maximum permissible current I_max

1.1 · V_R

1.3 · I_R

(V_R= rated voltage)

(I_R= rated current)

FK PC PM AC

June 2009

Please read the important notes,

cautions and warnings.

Page 2 of 66666666

Film capacitors – AC capacitors

Motor run capacitors

B32356 – MotorCap P2 Compact

Test data

AC test voltage terminal to terminal V_TT

2 · V_R, 2 s

3,000 s

Insulation resistance R_insor time constant 

at 20 °C, rel. Humidity  65%

(minimum as-delivered values)

Dissipation factor tan  at 20 °C

Maximum rate of voltage rise dV/dt_max

Climatic data

 1.0 · 10^-3(120 Hz)

10 V/s

Climatic category

25/085/21 to IEC 60068-1

Lower category T_min

–25 °C

+85 °C

21 days

Upper category T_max

Damp heat test t_test

Mechanical and thermal properties

Ball pressure test to IEC 60309-1 sec. 27.3

Plastic can and top disk material

 UL 94 V2 compatible

20 N at 125 °C

Compliant to EN 60252

 Glow wire test to IEC 60695-2-1/0 and -2-1/1

Test temperature 550 °C for I_R≤ 0.5 A

Test temperature 750 °C for I_R> 0.5 A

Self-extinguish within 2 seconds of

withdrawing glow wire without igniting

wrapping tissue to GWIT

 Part is compatible to EN 60335-1

Tracking Test to IEC 60112 solution A

Protection class to IEC 60529 2001

Compatibility to RoHS

> 250 V

IP 53

Compliance to directive 2002/95/EC

Approvals

VDE – 400 V/85 °C: 30,000 h (class A)

VDE – 450 V/85 °C: 10,000 h (class B)

Approved

FK PC PM AC

June 2009

Please read the important notes,

cautions and warnings.

Page 3 of 66666666

Film capacitors – AC capacitors

Motor run capacitors

B32356 – MotorCap P2 Compact

Mounting options

Dimensional drawing

* = 1: can without mounting

* = 2: can with M8 bolt

Stud M8x1.25

Star Washer 8mm

Nut M8x1.25

* = 5: fast fix mounting

M8-sized

M-Clip

fast fixation

Ø8.2+0.2/-0

Ø2.2+0.1/-0

FK PC PM AC

June 2009

Please read the important notes,

cautions and warnings.

Page 4 of 66666666

Film capacitors – AC capacitors

Motor run capacitors

B32356 – MotorCap P2 Compact

Ordering codes and packing units

V_R

C_R

Max. dimensions

d × l

Ordering code

(composition see below)

Packing units

V AC

µF

pcs.

112

400 / 450

2.0

25 × 50

30 × 56

30 × 62

35 × 56

35 × 62

35 × 71

40 × 72

35 × 96

40 × 72

45 × 72

50 × 96

B32356B4205J0*#

B32356B4255J0*#

B32356B4305J0*#

B32356B4355J0*#

B32356B4405J0*#

B32356B4505J0*#

B32356B4605J0*#

B32356B4705J0*#

B32356B4755J0*#

B32356B4805J0*#

B32356B4905J0*#

B32356B4106J0*#

B32356B4116J0*#

B32356B4126J1*#

B32356B4126J0*#

B32356B4136J0*#

B32356B4156J0*#

B32356B4186J0*#

B32356B4206J0*#

2.5

3.0

3.5

4.0

5.0

6.0

7.0

7.5

8.0

9.0

Composition of ordering code:

*: construction

plastic can

plastic can with M8 bolt

plastic can with fast fixation device available for diameters 30 mm, 32 mm and 35 mm,

others on request

#: cable length (dimension ‘B’ in drawing)

200 mm

300 mm

Please read “Applications warning, installation and maintenance instructions” and the “General Safety Data Sheet for Power

Capacitors” issued by ZVEI, which are available on the internet at www.epcos.com/ac_capacitors, to ensure optimum performance and to

prevent products from failing, and in worst case, bursting and fire. Information given in the data sheet reflects typical specifications. You are

kindly requested to approve our product specifications or request our approval for your specification before ordering.

FK PC PM AC

June 2009

Please read the important notes,

cautions and warnings.

Page 5 of 66666666

Important notes

The following applies to all products named in this publication:

1. Some parts of this publication contain statements about the suitability of our products for

certain areas of application. These statements are based on our knowledge of typical

requirements that are often placed on our products in the areas of application concerned. We

nevertheless expressly point out that such statements cannot be regarded as binding

statements about the suitability of our products for a particular customer application. As a

rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them

than the customers themselves. For these reasons, it is always ultimately incumbent on the

customer to check and decide whether an EPCOS product with the properties described in the

product specification is suitable for use in a particular customer application.

2. We also point out that in individual cases, a malfunction of electronic components or failure

before the end of their usual service life cannot be completely ruled out in the current state

of the art, even if they are operated as specified. In customer applications requiring a very high

level of operational safety and especially in customer applications in which the malfunction or

failure of an electronic component could endanger human life or health (e.g. in accident

prevention or life-saving systems), it must therefore be ensured by means of suitable design of the

customer application or other action taken by the customer (e.g. installation of protective circuitry

or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or

failure of an electronic component.

3. The warnings, cautions and product-specific notes must be observed.

4. In order to satisfy certain technical requirements, some of the products described in this

publication may contain substances subject to restrictions in certain jurisdictions (e.g.

because they are classed as hazardous). Useful information on this will be found in our Material

Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed

questions, please contact our sales offices.

5. We constantly strive to improve our products. Consequently, the products described in this

publication may change from time to time. The same is true of the corresponding product

specifications. Please check therefore to what extent product descriptions and specifications

contained in this publication are still applicable before or when you place an order.

We also reserve the right to discontinue production and delivery of products. Consequently,

we cannot guarantee that all products named in this publication will always be available.

The aforementioned does not apply in the case of individual agreements deviating from the

foregoing for customer-specific products.

6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of

the “General Terms of Delivery for Products and Services in the Electrical Industry”

published by the German Electrical and Electronics Industry Association (ZVEI).

7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DSSP, MiniBlue,

MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI,

SIKOREL, SilverCap, SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap

are trademarks registered or pending in Europe and in other countries. Further information will

be found on the Internet at www.epcos.com/trademarks.

FK PC PM AC

June 2009

Page 6 of 6

相关型号：