B32632B1682M189 [EPCOS]

CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 1600V, 0.0068uF, THROUGH HOLE MOUNT, RADIAL LEADED, LEAD FREE;


型号：	B32632B1682M189
厂家：	EPCOS
描述：	CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 1600V, 0.0068uF, THROUGH HOLE MOUNT, RADIAL LEADED, LEAD FREE 电容器
文件：	总27页 (文件大小：534K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Film Capacitors

Metallized Polypropylene Film Capacitors (MFP)

Series/Type:

B32632 ... B32634

Date:

December 2012

information contained therein without EPCOS' prior express consent is prohibited.

Metallized polypropylene film capacitors (MFP)

Very high pulse (wound)

B32632 ... B32634

Typical applications

Smoothing

High-frequency AC loads

Switch-mode power supplies

Electronic ballasts

HID lamps

Climatic

Max. operating temperature: 110 °C

Climatic category (IEC 60068-1): 55/100/56

Construction

Dielectric: polypropylene (PP)

Film metallized on one side and

metal foils internally connected in series

Contact layer of sprayed metal

Wound capacitor technology

Epoxy resin coating (UL 94 V-0)

Features

Highest possible contact reliability

Very high pulse strength

Self-healing properties

RoHS-compatible

Terminals

Crimped wire leads, lead-free tinned,

lead length (6 ꢀ1 mm)

Double crimped wire leads, lead-free tinned

Straight wire leads, lead-free tinned,

lead length (17 ±3 mm)

Different lead spacings (reduced and enlarged) available,

lead length (6 ꢀ1 mm)

Marking

Manufacturer's logo, style and type (P63x),

rated capacitance (coded),

capacitance tolerance (code letter),

rated DC voltage, date of manufacture (coded)

Delivery mode

Bulk (untaped)

Taped (Ammo pack or reel)

For notes on taping, refer to chapter "Taping and packing“.

Please read Cautions and warnings and

Important notes at the end of this document.

Page 2 of 27

B32632 ... B32634

Very high pulse (wound)

Dimensional drawings

Detail of double crimped version

Dimensions in mm

Lead spacing Lead diameter Type

±0.8

15.0

d₁

0.8

B32632

B32633

B32634

22.5

27.5

Please read Cautions and warnings and

Important notes at the end of this document.

Page 3 of 27

B32632 ... B32634

Very high pulse (wound)

Overview of available types

Lead spacing 15.0 mm

22.5 mm

B32633

Type

B32632

630

V_R(V DC)

1250 1600 2000 3000 630

1250 1600 2000 2500 3000

450 450 500 750 750

V_RMS(V AC) 300

450

500

750

300

C_R(nF)

0.47

0.68

1.0

1.5

2.2

3.3

4.7

6.8

100

Lead configurations

Series

Standard

Reduced

Straight

Double crimped

B32632

B32633

B32634

15 mm

7.5 / 10 / 12.5 mm 15 mm

15 mm

22.5 mm

27.5 mm

15 / 17.5 / 20 mm

25 mm

22.5 mm

27.5 mm

22.5 mm

27.5 mm

Please read Cautions and warnings and

Important notes at the end of this document.

Page 4 of 27

B32632 ... B32634

Very high pulse (wound)

Overview of available types

Lead spacing 27.5 mm

Type

B32634

630

V_R(V DC)

1250

450

1600

450

2000

500

V_RMS(V AC) 300

C_R(nF)

100

150

220

330

Lead configurations

Series

Standard

Reduced

Straight

Double crimped

B32632

B32633

B32634

15 mm

7.5 / 10 / 12.5 mm 15 mm

15 mm

22.5 mm

27.5 mm

15 / 17.5 / 20 mm

25 mm

22.5 mm

27.5 mm

22.5 mm

27.5 mm

Please read Cautions and warnings and

Important notes at the end of this document.

Page 5 of 27

B32632

Very high pulse (wound)

Ordering codes and packing units (lead spacing 15 mm)

V_R

V_RMS

f ≤1 kHz

C_R

Max. dimensions Ordering code

w × h × l

Ammo

(composition see pack

below) pcs./MOQ pcs./MOQ pcs./MOQ

Reel

Untaped

V DC V AC

630 300

2.2

6.0 × 11.5 × 18.5 B32632B6222+*** 3600

6.0 × 11.5 × 18.5 B32632B6332+*** 3600

6.0 × 11.5 × 18.5 B32632B6472+*** 3600

6.0 × 11.5 × 18.5 B32632B6682+*** 3600

6.0 × 11.5 × 18.5 B32632B6103+*** 3600

6.5 × 12.0 × 18.5 B32632B6153+*** 3200

7.5 × 13.5 × 18.5 B32632B6223+*** 2800

9.0 × 15.0 × 18.5 B32632B6333+*** 2400

11.0 × 16.5 × 18.5 B32632B6473+*** 1800

6.0 × 11.5 × 18.5 B32632B7102+*** 3400

6.0 × 11.5 × 18.5 B32632B7152+*** 3400

6.5 × 12.0 × 18.5 B32632B7222+*** 3400

6.5 × 12.0 × 18.5 B32632B7332+*** 3200

7.0 × 12.5 × 18.5 B32632B7472+*** 3200

7.5 × 14.0 × 18.5 B32632B7682+*** 3000

9.0 × 15.0 × 18.5 B32632B7103+*** 2400

11.5 × 16.5 × 18.5 B32632B7153+*** 1800

4800

4000

3600

3200

2400

4400

4000

3200

2400

4000

2000

4000

2000

3.3

4.7

6.8

1250 450

1.0

1.5

2.2

3.3

4.7

6.8

MOQ = Minimum Order Quantity, consisting of 4 packing units.

B32632B2471M*** and B32632B2681M*** are only available in M tolerance.

B32632B4471K*** and B32632B4681K*** are only available in K tolerance.

Further E series and intermediate capacitance values on request.

Composition of ordering code

+ = Capacitance tolerance code:

*** = Packaging code:

M = ±20%

K = ±10%

J = ±5%

289 = Ammo pack

189 = Reel

010 = Untaped crimped (lead length 6 ꢀ1 mm)

008 = Untaped straight (lead length 17±3 mm)

020 = Double crimped (lead length 6 ꢀ1 mm)

Packaging codes for further lead configurations (untaped):

Lead configuration (lead length 6 ꢀ1 mm)

Lead spacing (mm)

Reduced

7.5 mm

030

Reduced

10 mm

040

Reduced

12.5 mm

050

Enlarged

17.5 mm

060

Packaging code

Please read Cautions and warnings and

Important notes at the end of this document.

Page 6 of 27

B32632

Very high pulse (wound)

Ordering codes and packing units (lead spacing 15 mm)

V_R

V_RMS

f ≤1 kHz

C_R

Max. dimensions Ordering code

w × h × l

Ammo

(composition see pack

below) pcs./MOQ pcs./MOQ pcs./MOQ

Reel

Untaped

V DC V AC

1600 450

1.0

6.0 × 11.5 × 18.5 B32632B1102+*** 3600

6.0 × 11.5 × 18.5 B32632B1152+*** 3600

6.5 × 12.0 × 18.5 B32632B1222+*** 3200

7.5 × 13.0 × 18.5 B32632B1332+*** 2800

8.5 × 14.0 × 18.5 B32632B1472+*** 2400

9.5 × 15.0 × 18.5 B32632B1682+*** 2000

11.5 × 17.0 × 18.5 B32632B1103+*** 1800

4800

4000

3600

3200

2800

2400

4400

4000

3400

2800

2400

5200

4800

4000

3400

2800

4000

2000

4000

2000

4000

2000

1.5

2.2

3.3

4.7

6.8

2000 500

0.47 6.5 × 11.5 × 18.5 B32632B2471M*** 3400

0.68 6.5 × 12.0 × 18.5 B32632B2681M*** 3400

1.0

1.5

2.2

3.3

4.7 10.0 × 16.0 × 18.5 B32632B2472+*** 2000

6.8 12.0 × 17.5 × 18.5 B32632B2682+*** 1800

0.47 6.5 × 11.5 × 18.5 B32632B4471K*** 4000

0.68 7.0 × 13.0 × 18.5 B32632B4681K*** 3600

1.0

1.5

6.5 × 12.0 × 18.5 B32632B2102+*** 3400

6.5 × 12.0 × 18.5 B32632B2152+*** 3400

7.0 × 13.0 × 18.5 B32632B2222+*** 2400

8.5 × 14.5 × 18.5 B32632B2332+*** 2600

3000 750

8.5 × 14.0 × 18.5 B32632B4102+*** 3000

9.5 × 16.5 × 18.5 B32632B4152+*** 2600

2.2 12.0 × 17.5 × 18.5 B32632B4222+*** 2000

MOQ = Minimum Order Quantity, consisting of 4 packing units.

B32632B2471M*** and B32632B2681M*** are only available in M tolerance.

B32632B4471K*** and B32632B4681K*** are only available in K tolerance.

Further E series and intermediate capacitance values on request.

Composition of ordering code

+ = Capacitance tolerance code:

*** = Packaging code:

M = ±20%

K = ±10%

J = ±5%

289 = Ammo pack

189 = Reel

010 = Untaped crimped (lead length 6 ꢀ1 mm)

008 = Untaped straight (lead length 17±3 mm)

020 = Double crimped (lead length 6 ꢀ1 mm)

Packaging codes for further lead configurations (untaped):

Lead configuration (lead length 6 ꢀ1 mm)

Lead spacing (mm)

Reduced

7.5 mm

030

Reduced

10 mm

040

Reduced

12.5 mm

050

Enlarged

17.5 mm

060

Packaging code

Please read Cautions and warnings and

Important notes at the end of this document.

Page 7 of 27

B32633

Very high pulse (wound)

Ordering codes and packing units (lead spacing 22.5 mm)

V_R

V_RMS

f ≤1 kHz

C_R

Max. dimensions Ordering code

w × h × l

Ammo

(composition see pack

below) pcs./MOQ pcs./MOQ pcs./MOQ

Reel

Untaped

V DC V AC

630 300

100

6.5 × 12.0 × 27.0 B32633B6223+*** 2200

7.0 × 14.0 × 27.0 B32633B6333+*** 2000

7.5 × 14.5 × 27.0 B32633B6473+*** 1800

9.0 × 16.0 × 27.0 B32633B6683+*** 1400

10.5 × 18.5 × 27.0 B32633B6104+*** 1200

7.0 × 14.0 × 27.0 B32633B7103+*** 2000

8.0 × 15.5 × 27.0 B32633B7153+*** 1800

9.5 × 16.5 × 27.0 B32633B7223+*** 1400

11.5 × 19.0 × 27.0 B32633B7333+*** 1200

13.5 × 20.5 × 27.0 B32633B7473+*** 1000

3000

2800

2400

2000

1600

2800

2400

2000

1600

1400

2800

2400

2600

2000

1600

1200

2800

2200

1800

1400

1200

4000

2000

1000

2000

1000

4000

2000

1000

4000

2000

1000

1250 450

1600 450

3.3 6.5 × 12.5 × 27.0 B32633B1332+*** 2000

4.7 6.5 × 12.5 × 27.0 B32633B1472+*** 2000

6.8 7.0 × 14.5 × 27.0 B32633B1682+*** 2000

8.0 × 15.5 × 27.0 B32633B1103+*** 1800

9.5 × 17.0 × 27.0 B32633B1153+*** 1400

11.5 × 19.0 × 27.0 B32633B1223+*** 1200

14.5 × 22.0 × 27.0 B32633B1333+*** 1000

2000 500

2.2 6.5 × 13.0 × 27.0 B32633B2222+*** 2000

3.3 6.5 × 13.0 × 27.0 B32633B2332+*** 2000

4.7 7.0 × 14.5 × 27.0 B32633B2472+*** 2000

6.8 8.5 × 16.0 × 27.0 B32633B2682+*** 1600

10.0 × 17.0 × 27.0 B32633B2103+*** 1400

12.0 × 19.5 × 27.0 B32633B2153+*** 1000

14.5 × 22.0 × 27.0 B32633B2223+***

800

MOQ = Minimum Order Quantity, consisting of 4 packing units.

Further E series and intermediate capacitance values on request.

Composition of ordering code

+ = Capacitance tolerance code:

*** = Packaging code:

K = ±10%

J = ±5%

289 = Ammo pack

189 = Reel

010 = Untaped crimped (lead length 6 ꢀ1 mm)

008 = Untaped straight (lead length 17±3 mm)

020 = Double crimped (lead length 6 ꢀ1 mm)

Packaging codes for further lead configurations (untaped):

Lead configuration (lead length 6 ꢀ1 mm)

Lead spacing (mm)

Reduced

15 mm

055

Reduced

17.5 mm

060

Reduced

20 mm

070

Enlarged

25 mm

080

Packaging code

Please read Cautions and warnings and

Important notes at the end of this document.

Page 8 of 27

B32633

Very high pulse (wound)

Ordering codes and packing units (lead spacing 22.5 mm)

V_R

V_RMS

f ≤1 kHz

C_R

Max. dimensions Ordering code

w × h × l

Ammo

(composition see pack

below) pcs./MOQ pcs./MOQ pcs./MOQ

Reel

Untaped

V DC V AC

2500 750

1.0 7.0 × 13.5 × 27.0 B32633B3102+*** 1800

1.5 7.0 × 14.0 × 27.0 B32633B3152+*** 1800

2.2 7.5 × 15.0 × 27.0 B32633B3222+*** 1800

3.3 9.0 × 16.0 × 27.0 B32633B3332+*** 1400

4.7 10.0 × 18.0 × 27.0 B32633B3472+*** 1400

6.8 12.0 × 20.5 × 27.0 B32633B3682+*** 1200

2600

2400

2000

1600

1400

1200

3600

3000

2600

2200

1800

1400

4000

2000

1000

800

2000

800

14.0 × 23.0 × 27.0 B32633B3103+*** 1000

17.0 × 26.0 × 27.0 B32633B3153+*** 800

3000 750

1.0 6.5 × 12.0 × 27.0 B32633B4102+*** 2600

1.5 7.5 × 13.5 × 27.0 B32633B4152+*** 2200

2.2 8.5 × 15.0 × 27.0 B32633B4222+*** 1800

3.3 10.0 × 17.0 × 27.0 B32633B4332+*** 1600

4.7 11.5 × 19.0 × 27.0 B32633B4472+*** 1200

6.8 13.0 × 22.0 × 27.0 B32633B4682+*** 1000

MOQ = Minimum Order Quantity, consisting of 4 packing units.

Further E series and intermediate capacitance values on request.

Composition of ordering code

+ = Capacitance tolerance code:

*** = Packaging code:

K = ±10%

J = ±5%

289 = Ammo pack

189 = Reel

010 = Untaped crimped (lead length 6 ꢀ1 mm)

008 = Untaped straight (lead length 17±3 mm)

020 = Double crimped (lead length 6 ꢀ1 mm)

Packaging codes for further lead configurations (untaped):

Lead configuration (lead length 6 ꢀ1 mm)

Lead spacing (mm)

Reduced

15 mm

055

Reduced

17.5 mm

060

Reduced

20 mm

070

Enlarged

25 mm

080

Packaging code

Please read Cautions and warnings and

Important notes at the end of this document.

Page 9 of 27

B32634

Very high pulse (wound)

Ordering codes and packing units (lead spacing 27.5 mm)

V_R

V_RMS

C_R

Max. dimensions Ordering code

Untaped

f ≤1 kHz

V DC V AC

630 300

w × h × l

(composition see

below)

pcs./MOQ

100

150

220

330

100

9.5 × 18.0 × 32.0 B32634B6104+***

11.5 × 20.5 × 32.0 B32634B6154+***

13.5 × 22.5 × 32.0 B32634B6224+***

16.0 × 25.5 × 32.0 B32634B6334+***

9.5 × 18.0 × 32.0 B32634B7333+***

11.5 × 20.0 × 32.0 B32634B7473+***

13.0 × 23.0 × 32.0 B32634B7683+***

16.0 × 26.0 × 32.0 B32634B7104+***

8.5 × 17.0 × 32.0 B32634B1153+***

10.0 × 18.5 × 32.0 B32634B1223+***

12.0 × 21.5 × 32.0 B32634B1333+***

14.0 × 22.5 × 32.0 B32634B1473+***

16.0 × 25.5 × 32.0 B32634B1683+***

8.5 × 17.0 × 32.0 B32634A2103+***

10.0 × 19.5 × 32.0 B32634A2153+***

12.0 × 21.5 × 32.0 B32634A2223+***

15.0 × 24.0 × 32.0 B32634A2333+***

1000

800

600

1250 450

1600 450

1000

800

600

2000

1000

800

600

2000 500

2000

1000

800

MOQ = Minimum Order Quantity, consisting of 4 packing units.

Further E series and intermediate capacitance values on request.

Composition of ordering code

+ = Capacitance tolerance code:

*** = Packaging code:

K = ±10%

J = ±5%

010 = Untaped crimped (lead length 6 ꢀ1 mm)

008 = Untaped straight (lead length 17±3 mm)

020 = Double crimped (lead length 6 ꢀ1 mm)

Packaging codes for further lead configurations (untaped):

Lead configuration (lead length 6 ꢀ1 mm)

Lead spacing (mm)

Reduced

25 mm

090

Packaging code

Please read Cautions and warnings and

Important notes at the end of this document.

Page 10 of 27

B32632 ... B32634

Very high pulse (wound)

Technical data

Operating temperature range Max. operating temperature T_op,max

Upper category temperature T_max

+110 °C

+100 °C

ꢀ55 °C

+85 °C

Lower category temperature T_min

Rated temperature T_R

Dissipation factor tan δ

at 20 °C

1.0 ꢁ 10^-3(at 10 kHz)

2.0 ꢁ 10^-3(at 100 kHz)

(upper limit values)

Insulation resistance R_ins

at 20 °C, rel. humidity ≤ 65%

(minimum as-delivered values)

DC test voltage

100 GΩ

2.0 ꢁ V_R, 2 s

(B32632/3000 V DC: 1.2 ꢁ V_R, 2 s;

B32633/3000 V DC: 1.6 ꢁ V_R, 2 s)

Category voltage V_C

T_A(°C)

DC voltage derating

V_C= V_R

AC voltage derating

V_C,RMS= V_RMS

(continuous operation with V_DCT_A≤ 85

or V_ACat f ≤ 1 kHz)

Operating voltage V_opfor

short operating periods

(V_DCor V_ACat f ≤ 1 kHz)

Damp heat test

85<T_A≤100 V_C= V_Rꢁ (165ꢀT_A)/80 V_C,RMS= V_RMSꢁ (165ꢀT_A)/80

T_A(°C)

T_A≤ 85

DC voltage (max. hours) AC voltage (max. hours)

V_op= 1.25 ꢁ V_C(2000 h) V_op= 1.0 ꢁ V_C,RMS(2000 h)

85<T_A≤100 V_op= 1.25 ꢁ V_C(1000 h) V_op= 1.0 ꢁ V_C,RMS(1000 h)

56 days/40 °C/93% relative humidity

Limit values after damp

heat test

Capacitance change ꢂ∆C/Cꢂ

Dissipation factor change ∆ tan δ

Insulation resistance R_ins

≤ 2%

≤ 1.0 ꢁ 10^-3(at 10 kHz)

≥ 50% of minimum

as-delivered values

Reliability:

Failure rate λ

Service life t_SL

1 fit (≤ 2 ꢁ 10^-9/h) at 0.5 ꢁ V_R, 40 °C

200 000 h at 1.0 ꢁ V_R, 85 °C

For conversion to other operating conditions and temperatures,

refer to chapter "Quality, 2 Reliability".

Failure criteria:

Total failure

Short circuit or open circuit

Failure due to variation

of parameters

Capacitance change ꢂ∆C/Cꢂ

Dissipation factor tan δ

> 10%

> 4 ꢁ upper limit value

< 1500 MΩ

Insulation resistance R_ins

Please read Cautions and warnings and

Important notes at the end of this document.

Page 11 of 27

B32632 ... B32634

Very high pulse (wound)

Pulse handling capability

"dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal

voltages, expressed in V/µs.

"k₀" represents the maximum permissible pulse characteristic of the waveform applied to the

capacitor, expressed in V²/µs.

Note:

The values of dV/dt and k₀provided below must not be exceeded in order to avoid damaging the

capacitor.

dV/dt values

Lead spacing

V_R

15 mm

22.5 mm

27.5 mm

V_RMS

V AC

300

450

500

750

V DC

630

dV/dt in V/µs

6 000

3 600

8 400

2 400

5 400

6 600

8 400

ꢀ

1250

14 400

16 800

20 400

ꢀ

1600

10 800

14 400

16 800

18 000

2000

2500

3000

21 600

ꢀ

k₀values

Lead spacing

V_R

15 mm

22.5 mm

27.5 mm

V_RMS

V AC

300

450

500

750

V DC

630

k₀in V²/µs

7 560 000

36 000 000

53 760 000

81 600 000

ꢀ

4 536 000

3 024 000

13 500 000

21 120 000

33 600 000

ꢀ

1250

21 000 000

34 560 000

57 600 000

84 000 000

108 000 000

1600

2000

2500

3000

129 600 000

ꢀ

Please read Cautions and warnings and

Important notes at the end of this document.

Page 12 of 27

B32632 ... B32634

Very high pulse (wound)

Impedance Z versus frequency f

(typical values)

Please read Cautions and warnings and

Important notes at the end of this document.

Page 13 of 27

B32632

Very high pulse (wound)

Permissible AC voltage V_RMSversus frequency f (for sinusoidal waveforms, T_A≤90 °C)

For T_A>90 °C, please refer to "General technical information", section 3.2.3.

Lead spacing 15 mm

630 V DC/300 V AC

1250 V DC/450 V AC

1600 V DC/450 V AC

2000 V DC/500 V AC

Please read Cautions and warnings and

Important notes at the end of this document.

Page 14 of 27

B32632

Very high pulse (wound)

Permissible AC voltage V_RMSversus frequency f (for sinusoidal waveforms, T_A≤90 °C)

For T_A>90 °C, please refer to "General technical information", section 3.2.3.

Lead spacing 15 mm

3000 V DC/750 V AC

Please read Cautions and warnings and

Important notes at the end of this document.

Page 15 of 27

B32633

Very high pulse (wound)

Permissible AC voltage V_RMSversus frequency f (for sinusoidal waveforms, T_A≤90 °C)

For T_A>90 °C, please refer to "General technical information", section 3.2.3.

Lead spacing 22.5 mm

630 V DC/300 V AC

1250 V DC/450 V AC

1600 V DC/450 V AC

2000 V DC/500 V AC

Please read Cautions and warnings and

Important notes at the end of this document.

Page 16 of 27

B32633

Very high pulse (wound)

Permissible AC voltage V_RMSversus frequency f (for sinusoidal waveforms, T_A≤90 °C)

For T_A>90 °C, please refer to "General technical information", section 3.2.3.

Lead spacing 22.5 mm

2500 V DC/750 V AC

3000 V DC/750 V AC

Please read Cautions and warnings and

Important notes at the end of this document.

Page 17 of 27

B32634

Very high pulse (wound)

Permissible AC voltage V_RMSversus frequency f (for sinusoidal waveforms, T_A≤90 °C)

For T_A>90 °C, please refer to "General technical information", section 3.2.3.

Lead spacing 27.5 mm

630 V DC/300 V AC

1250 V DC/450 V AC

1600 V DC/450 V AC

2000 V DC/500 V AC

Please read Cautions and warnings and

Important notes at the end of this document.

Page 18 of 27

B32632 ... B32634

Very high pulse (wound)

Mounting guidelines

Soldering

1.1

Solderability of leads

The solderability of terminal leads is tested to IEC 60068-2-20, test Ta, method 1.

Before a solderability test is carried out, terminals are subjected to accelerated ageing (to

IEC 60068-2-2, test Ba: 4 h exposure to dry heat at 155 °C). Since the ageing temperature is far

higher than the upper category temperature of the capacitors, the terminal wires should be cut off

from the capacitor before the ageing procedure to prevent the solderability being impaired by the

products of any capacitor decomposition that might occur.

Solder bath temperature

Soldering time

235 ±5 °C

2.0 ±0.5 s

Immersion depth

Evaluation criteria:

Visual inspection

2.0 +0/ꢀ0.5 mm from capacitor body or seating plane

Wetting of wire surface by new solder ≥90%, free-flowing solder

1.2

Resistance to soldering heat

Resistance to soldering heat is tested to IEC 60068-2-20, test Tb, method 1A.

Conditions:

Series

Solder bath temperature Soldering time

MKT boxed (except 2.5 × 6.5 × 7.2 mm) 260 ±5 °C

coated

10 ±1 s

uncoated (lead spacing > 10 mm)

MFP

MKP (lead spacing > 7.5 mm)

MKT boxed (case 2.5 × 6.5 × 7.2 mm)

5 ±1 s

(lead spacing ≤ 7.5 mm)

uncoated (lead spacing ≤ 10 mm)

insulated (B32559)

MKP

MKT

< 4 s

recommended soldering

profile for MKT uncoated

(lead spacing ≤ 10 mm) and

insulated (B32559)

Please read Cautions and warnings and

Important notes at the end of this document.

Page 19 of 27

B32632 ... B32634

Very high pulse (wound)

Immersion depth

2.0 +0/ꢀ0.5 mm from capacitor body or seating plane

Shield

Heat-absorbing board, (1.5 ±0.5) mm thick, between capacitor

body and liquid solder

Evaluation criteria:

Visual inspection

No visible damage

2% for MKT/MKP/MFP

5% for EMI suppression capacitors

As specified in sectional specification

∆C/C₀

tan δ

Please read Cautions and warnings and

Important notes at the end of this document.

Page 20 of 27

B32632 ... B32634

Very high pulse (wound)

1.3

General notes on soldering

Permissible heat exposure loads on film capacitors are primarily characterized by the upper cate-

gory temperature T_max. Long exposure to temperatures above this type-related temperature limit

can lead to changes in the plastic dielectric and thus change irreversibly a capacitor's electrical

characteristics. For short exposures (as in practical soldering processes) the heat load (and thus

the possible effects on a capacitor) will also depend on other factors like:

Pre-heating temperature and time

Forced cooling immediately after soldering

Terminal characteristics:

diameter, length, thermal resistance, special configurations (e.g. crimping)

Height of capacitor above solder bath

Shadowing by neighboring components

Additional heating due to heat dissipation by neighboring components

Use of solder-resist coatings

The overheating associated with some of these factors can usually be reduced by suitable coun-

termeasures. For example, if a pre-heating step cannot be avoided, an additional or reinforced

cooling process may possibly have to be included.

EPCOS recommends the following conditions:

Pre-heating with a maximum temperature of 110 °C

Temperature inside the capacitor should not exceed the following limits:

ꢀ MKP/MFP 110 °C

ꢀ MKT 160 °C

When SMD components are used together with leaded ones, the leaded film capacitors should

not pass into the SMD adhesive curing oven. The leaded components should be assembled af-

ter the SMD curing step.

Leaded film capacitors are not suitable for reflow soldering.

Uncoated capacitors

For uncoated MKT capacitors with lead spacings ≤10 mm (B32560/B32561) the following mea-

sures are recommended:

pre-heating to not more than 110 °C in the preheater phase

rapid cooling after soldering

Please read Cautions and warnings and

Important notes at the end of this document.

Page 21 of 27

B32632 ... B32634

Very high pulse (wound)

Cautions and warnings

Do not exceed the upper category temperature (UCT).

Do not apply any mechanical stress to the capacitor terminals.

Avoid any compressive, tensile or flexural stress.

Do not move the capacitor after it has been soldered to the PC board.

Do not pick up the PC board by the soldered capacitor.

Do not place the capacitor on a PC board whose PTH hole spacing differs from the specified

lead spacing.

Do not exceed the specified time or temperature limits during soldering.

Avoid external energy inputs, such as fire or electricity.

Avoid overload of the capacitors.

The table below summarizes the safety instructions that must always be observed. A detailed de-

scription can be found in the relevant sections of the chapters "General technical information" and

"Mounting guidelines".

Topic

Safety information

Reference chapter

"General technical

information"

Storage conditions Make sure that capacitors are stored within the

4.5

specified range of time, temperature and humidity "Storage conditions"

conditions.

Flammability

Avoid external energy, such as fire or electricity

(passive flammability), avoid overload of the

capacitors (active flammability) and consider the

flammability of materials.

5.3

"Flammability"

Resistance to

vibration

Do not exceed the tested ability to withstand

vibration. The capacitors are tested to

IEC 60068-2-6.

5.2

"Resistance to vibration"

EPCOS offers film capacitors specially designed

for operation under more severe vibration regimes

such as those found in automotive applications.

Consult our catalog "Film Capacitors for

Automotive Electronics".

Please read Cautions and warnings and

Important notes at the end of this document.

Page 22 of 27

B32632 ... B32634

Very high pulse (wound)

Topic

Safety information

Reference chapter

"Mounting guidelines"

Soldering

Cleaning

Do not exceed the specified time or temperature 1 "Soldering"

limits during soldering.

Use only suitable solvents for cleaning capacitors. 2 "Cleaning"

Embedding of

capacitors in

When embedding finished circuit assemblies in

plastic resins, chemical and thermal influences

3 "Embedding of

capacitors in finished

assemblies"

finished assemblies must be taken into account.

Caution: Consult us first, if you also wish to

embed other uncoated component types!

Please read Cautions and warnings and

Important notes at the end of this document.

Page 23 of 27

B32632 ... B32634

Very high pulse (wound)

Symbols and terms

Symbol

English

German

Heat transfer coefficient

Wärmeübergangszahl

α_C

Temperature coefficient of capacitance Temperaturkoeffizient der Kapazität

Capacitor surface area

Kondensatoroberfläche

Feuchtekoeffizient der Kapazität

Kapazität

β_C

Humidity coefficient of capacitance

Capacitance

C_R

Rated capacitance

Nennkapazität

∆C

∆C/C

Absolute capacitance change

Relative capacitance change (relative

deviation of actual value)

Absolute Kapazitätsänderung

Relative Kapazitätsänderung (relative

Abweichung vom Ist-Wert)

∆C/C_R

Capacitance tolerance (relative deviation Kapazitätstoleranz (relative Abweichung

from rated capacitance)

Time differential

vom Nennwert)

Differentielle Zeit

∆t

Time interval

Zeitintervall

∆T

Absolute temperature change

(self-heating)

Absolute Temperaturänderung

(Selbsterwärmung)

∆tan δ

∆V

Absolute change of dissipation factor

Absolute voltage change

Absolute Änderung des Verlustfaktors

Absolute Spannungsänderung

dV/dt

Time differential of voltage function (rate Differentielle Spannungsänderung

of voltage rise)

(Spannungsflankensteilheit)

Spannungsänderung pro Zeitintervall

Aktivierungsenergie zur Diffusion

Eigeninduktivität

∆V/∆t

Voltage change per time interval

Activation energy for diffusion

Self-inductance

ESL

ESR

Equivalent series resistance

Frequency

Ersatz-Serienwiderstand

Frequenz

f₁

Frequency limit for reducing permissible Grenzfrequenz für thermisch bedingte

AC voltage due to thermal limits

Reduzierung der zulässigen

Wechselspannung

f₂

Frequency limit for reducing permissible Grenzfrequenz für strombedingte

AC voltage due to current limit

Reduzierung der zulässigen

Wechselspannung

f_r

Resonant frequency

Resonanzfrequenz

F_D

Thermal acceleration factor for diffusion Therm. Beschleunigungsfaktor zur

Diffusion

F_T

Derating factor

Deratingfaktor

Current (peak)

Stromspitze

I_C

Category current (max. continuous

current)

Kategoriestrom (max. Dauerstrom)

Please read Cautions and warnings and

Important notes at the end of this document.

Page 24 of 27

B32632 ... B32634

Very high pulse (wound)

Symbol

I_RMS

English

German

(Sinusoidal) alternating current,

root-mean-square value

Capacitance drift

(Sinusförmiger) Wechselstrom

i_z

Inkonstanz der Kapazität

Impulskennwert

k₀

L_S

Pulse characteristic

Series inductance

Serieninduktivität

Failure rate

Ausfallrate

λ₀

Constant failure rate during useful

service life

Konstante Ausfallrate in der

Nutzungsphase

λ_test

P_diss

P_gen

Failure rate, determined by tests

Dissipated power

Experimentell ermittelte Ausfallrate

Abgegebene Verlustleistung

Erzeugte Verlustleistung

Wärmeenergie

Generated power

Heat energy

Density of water vapor in air

Universal molar constant for gases

Ohmic resistance of discharge circuit

Dichte von Wasserdampf in Luft

Allg. Molarkonstante für Gas

Ohmscher Widerstand des

Entladekreises

R_i

Internal resistance

Insulation resistance

Parallel resistance

Series resistance

severity (humidity test)

Time

Innenwiderstand

R_ins

R_P

R_S

Isolationswiderstand

Parallelwiderstand

Serienwiderstand

Schärfegrad (Feuchtetest)

Zeit

Temperature

Temperatur

Time constant

Zeitkonstante

tan δ

tan δ_D

Dissipation factor

Dielectric component of dissipation

factor

Verlustfaktor

Dielektrischer Anteil des Verlustfaktors

tan δ_P

tan δ_S

T_A

Parallel component of dissipation factor Parallelanteil des Verlfustfaktors

Series component of dissipation factor

Ambient temperature

Serienanteil des Verlustfaktors

Umgebungstemperatur

T_max

T_min

Upper category temperature

Lower category temperature

Obere Kategorietemperatur

Untere Kategorietemperatur

t_OL

Operating life at operating temperature Betriebszeit bei Betriebstemperatur und

and voltage

-spannung

T_op

T_R

Operating temperature

Rated temperature

Reference temperature

Reference service life

AC voltage

Beriebstemperatur

Nenntemperatur

Referenztemperatur

Referenz-Lebensdauer

Wechselspannung

T_ref

t_SL

V_AC

Please read Cautions and warnings and

Important notes at the end of this document.

Page 25 of 27

B32632 ... B32634

Very high pulse (wound)

Symbol

V_C

English

German

Category voltage

Category AC voltage

Kategoriespannung

(Sinusförmige)

V_C,RMS

Kategorie-Wechselspannung

Teilentlade-Einsatzspannung

Ladespannung

V_CD

V_ch

V_DC

V_FB

V_i

Corona-discharge onset voltage

Charging voltage

DC voltage

Gleichspannung

Fly-back capacitor voltage

Input voltage

Spannung (Flyback)

Eingangsspannung

Ausgangssspannung

Betriebsspannung

V_o

Output voltage

V_op

V_p

Operating voltage

Peak pulse voltage

Peak-to-peak voltage Impedance

Rated voltage

Impuls-Spitzenspannung

Spannungshub

V_pp

V_R

Nennspannung

Amplitude of rated AC voltage

Amplitude der Nenn-Wechselspannung

V_RMS

(Sinusoidal) alternating voltage,

root-mean-square value

S-correction voltage

(Sinusförmige) Wechselspannung

V_SC

V_sn

Spannung bei Anwendung "S-correction"

Spannung bei Anwendung

"Beschaltung"

Snubber capacitor voltage

Impedance

Scheinwiderstand

Lead spacing

Rastermaß

Please read Cautions and warnings and

Important notes at the end of this document.

Page 26 of 27

Important notes

The following applies to all products named in this publication:

1. Some parts of this publication contain statements about the suitability of our products for

certain areas of application. These statements are based on our knowledge of typical re-

quirements that are often placed on our products in the areas of application concerned. We

nevertheless expressly point out that such statements cannot be regarded as binding

statements about the suitability of our products for a particular customer application.

As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar

with them than the customers themselves. For these reasons, it is always ultimately incum-

bent on the customer to check and decide whether an EPCOS product with the properties de-

scribed in the product specification is suitable for use in a particular customer application.

2. We also point out that in individual cases, a malfunction of electronic components or

failure before the end of their usual service life cannot be completely ruled out in the

current state of the art, even if they are operated as specified. In customer applications

requiring a very high level of operational safety and especially in customer applications in

which the malfunction or failure of an electronic component could endanger human life or

health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by

means of suitable design of the customer application or other action taken by the customer

(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by

third parties in the event of malfunction or failure of an electronic component.

3. The warnings, cautions and product-specific notes must be observed.

4. In order to satisfy certain technical requirements, some of the products described in this

publication may contain substances subject to restrictions in certain jurisdictions (e.g.

because they are classed as hazardous). Useful information on this will be found in our Ma-

terial Data Sheets on the Internet (www.epcos.com/material). Should you have any more de-

tailed questions, please contact our sales offices.

5. We constantly strive to improve our products. Consequently, the products described in this

publication may change from time to time. The same is true of the corresponding product

specifications. Please check therefore to what extent product descriptions and specifications

contained in this publication are still applicable before or when you place an order. We also

reserve the right to discontinue production and delivery of products. Consequently, we

cannot guarantee that all products named in this publication will always be available. The

aforementioned does not apply in the case of individual agreements deviating from the fore-

going for customer-specific products.

6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver-

sion of the "General Terms of Delivery for Products and Services in the Electrical In-

dustry" published by the German Electrical and Electronics Industry Association

(ZVEI).

7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CSMP, CSSP, CTVS,

DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC,

MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL,

SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse,

WindCap are trademarks registered or pending in Europe and in other countries. Further

information will be found on the Internet at www.epcos.com/trademarks.

Page 27 of 27

B32632B1682M189 [EPCOS]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E