B41560A5479M000 [EPCOS]
Capacitors with screw terminals; 电容器用螺丝端子
| 型号： | B41560A5479M000 |
| 厂家： | 
EPCOS |
| 描述： | Capacitors with screw terminals |
| 文件： | 总14页 (文件大小：477K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Aluminum electrolytic capacitors
Capacitors with screw terminals
Series/Type:
B41560, B41580
Date:
December 2006
EPCOS AG 2007. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
Capacitors with screw terminals
B41560, B41580
Compact ꢀ 105 °C
Long-life grade capacitors
Applications
General industrial electronics
Professional power supplies
Features
High reliability, extremely good electrical characteristics
High CV product, i.e. extremely compact
High ripple current capability
B41560
B41580
All-welded construction ensures reliable electrical contact
Version with low-inductance design available
Construction
Charge-discharge proof, polar
Aluminum case with insulating sleeve
Poles with screw terminal connections
Mounting with ring clips, clamps or threaded stud
The bases of types with threaded stud are not insulated
Please read Cautions and warnings and
Important notes at the end of this document.
Page 2 of 14
B41560, B41580
Compact ꢀ 105 °C
Specifications and characteristics in brief
Rated voltage VR
Surge voltage VS
25 ... 100 V DC
1.15 ꢁ VR
Rated capacitance CR
Capacitance tolerance
1500 ... 330000 µF
±20% ꢂ M
Leakage current Ileak
(20 °C, 5 min)
Self-inductance ESL
Approx. 20 nH
Capacitors with low-inductance design:
d ≥ 64.3 mm: approx. 13 nH
Useful life
Requirements:
105 °C; VR; IAC,R
85 °C; VR; IAC,max
40 °C; VR; 2.2 ꢁ IAC,R
Voltage endurance test
105 °C; VR
> 3000 h
> 6000 h
> 250000 h
∆C/C
ESR
Ileak
≤ ±45% of initial value
≤ 3 times initial specified limit
≤ initial specified limit
Post test requirements:
2000 h
∆C/C
ESR
Ileak
≤ ±15% of initial value
≤ 1.3 times initial specified limit
≤ initial specified limit
Vibration resistance test To IEC 60068-2-6, test Fc:
Displacement amplitude 0.75 mm, frequency range 10 ... 55 Hz,
acceleration max. 10 g, duration 3 × 2 h.
Capacitor mounted by its body which is rigidly clamped to the work
surface.
IEC climatic category
To IEC 60068-1:
40/105/56 (ꢀ40 °C/+105 °C/56 days damp heat test)
Detail specification
Sectional specification
Similar to CECC 30301-810
IEC 60384-4
Ripple current capability
Due to the ripple current capability of the contact elements, the following current upper limits must
not be exceeded:
Capacitor diameter
IAC,max
≤ 51.6 mm
64.3 mm
45 A
76.9 mm
57 A
34 A
Please read Cautions and warnings and
Page 3 of 14
Important notes at the end of this document.
B41560, B41580
Compact ꢀ 105 °C
Dimensional drawings
B41560
B41580
Ring clip/clamp mounting
Threaded stud mounting
Screw terminals with UNF threads are available upon request.
Dimensions and weights
Ter-
Dimensions (mm) with insulating sleeve
Approx.
minal
weight (g)
d
l ±1
55.7
80.7
105.7 112.2 13
80.7 87.2 17
l1 ±1
62.2 13
87.2 13
l2 +0/ꢀ1 d1
d2 max. a +0.2/ꢀ0.4
M5
M5
M5
M5
M5
M5
M6
M6
35.7 +0/-0.8
35.7 +0/-0.8
35.7 +0/-0.8
51.6 +0/-0.8
51.6 +0/-0.8
64.3 +0/-0.8
76.9 +0/-0.7
76.9 +0/-0.7
M8
M8
M8
8.2
8.2
8.2
12.7
12.7
12.7
22.2
22.2
28.5
31.7
31.7
65
105
135
220
280
440
620
840
M12 10.2
M12 10.2
M12 13.2
M12 17.7
M12 17.7
105.7 112.2 17
105.7 112.2 17
105.7 111.5 17
143.2 149.0 17
Dimensions are also valid for low-inductance design.
Packing
Capacitor diameter d
35.7 mm
Packing units (pcs.)
Capacitor diameter d
64.3 mm
Packing units (pcs.)
36
22
15
12
51.6 mm
76.9 mm
For ecological reasons the packing is pure cardboard.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 4 of 14
B41560, B41580
Compact ꢀ 105 °C
Special design
Low-inductance design
Design
Identification in 3rd
Remark
block of ordering code
Low inductance (13 nH) M003
For capacitors with diameter d ≥ 64.3 mm
Accessories
The following items are included in the delivery package, but are not fastened to the capacitors:
Thread Toothed
washers
Screws/nuts
Maximum
torque
For terminals M5
M6
A 5.1 DIN 6797 Cylinder-head screw M5 × 8 DIN 84-4.8
2 Nm
A 6.4 DIN 6797 Cylinder-head screw M6 × 12 DIN 85-4.8 2.5 Nm
For mounting M8
J 8.2 DIN 6797
Hex nut BM 8 DIN 439
4 Nm
M12
J 12.5 DIN 6797 Hex nut BM 12 DIN 439
10 Nm
The following items must be ordered separately. For details, refer to chapter "Capacitors with
screw terminals ꢀ Accessories".
Item
Type
Ring clips
B44030
B44030
B44020
Clamps for capacitors with d ≥ 64.3 mm
Insulating parts
Please read Cautions and warnings and
Important notes at the end of this document.
Page 5 of 14
B41560, B41580
Compact ꢀ 105 °C
Overview of available types
VR (V DC)
25
40
63
100
Case dimensions d × l (mm)
CR (µF)
1500
35.7 × 55.7
35.7 × 80.7
35.7 × 80.7
35.7 × 105.7
51.6 × 80.7
51.6 × 105.7
64.3 × 105.7
76.9 × 105.7
76.9 × 143.2
2200
3300
4700
35.7 × 55.7
35.7 × 80.7
35.7 × 105.7
51.6 × 80.7
51.6 × 105.7
64.3 × 105.7
64.3 × 105.7
76.9 × 105.7
76.9 × 143.2
6800
10000
15000
22000
33000
47000
68000
100000
150000
220000
330000
35.7 × 55.7
35.7 × 55.7
35.7 × 80.7
35.7 × 80.7
35.7 × 105.7
51.6 × 80.7
51.6 × 105.7
64.3 × 105.7
76.9 × 105.7
76.9 × 143.2
35.7 × 80.7
35.7 × 105.7
51.6 × 80.7
51.6 × 105.7
51.6 × 105.7
64.3 × 105.7
76.9 × 105.7
76.9 × 143.2
The capacitance and voltage ratings listed above are available in different cases upon request.
Other voltage and capacitance ratings are also available upon request.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 6 of 14
B41560, B41580
Compact ꢀ 105 °C
Technical data and ordering codes
CR
Case
ESRtyp ESRmax Zmax
IAC,max IAC,max IAC,R
Ordering code
100 Hz dimensions 100 Hz 100 Hz 10 kHz 100 Hz 100 Hz 100 Hz (composition see
20 °C
µF
d × l
mm
20 °C 20 °C 20 °C 40 °C 85 °C 105 °C below)
mΩ
mΩ
mΩ
A
A
A
VR = 25 V DC
15000 35.7 × 55.7 21
22000 35.7 × 80.7 14
33000 35.7 × 80.7 15
47000 35.7 × 105.7 8.0
68000 51.6 × 80.7 4.8
100000 51.6 × 105.7 4.7
150000 64.3 × 105.7 4.0
220000 76.9 × 105.7 3.5
330000 76.9 × 143.2 3.0
42
29
20
16
12
31
22
17
13
9.3
7.6
6.4
5.6
5.1
18
25
30
30
34
34
45
57
57
11
15
18
23
26
32
38
40
50
5.3
7.4
8.8
B415*0A5159M000
B415*0A5229M000
B415*0A5339M000
B415*0A5479M000
B415*0A5689M000
B415*0A5100M000
B415*0A5150M00#
B415*0A5220M00#
B415*0A5330M00#
11
13
15
18
20
24
9.4
8.0
5.3
4.5
VR = 40 V DC
10000 35.7 × 55.7 17
15000 35.7 × 80.7 12
22000 35.7 × 105.7 8.5
33000 51.6 × 80.7 6.0
47000 51.6 × 105.7 5.0
68000 51.6 × 105.7 4.5
100000 64.3 × 105.7 4.1
150000 76.9 × 105.7 3.6
220000 76.9 × 143.2 3.3
42
37
16
14
13
18
25
30
34
34
34
45
57
57
11
15
20
23
29
30
38
41
49
5.3
7.4
9.5
B415*0A7109M000
B415*0A7159M000
B415*0A7229M000
B415*0A7339M000
B415*0A7479M000
B415*0A7689M000
B415*0A7100M00#
B415*0A7150M00#
B415*0A7220M00#
23
17
12
10
11
10
14
15
18
20
24
9.0
8.4
7.0
6.0
5.4
8.2
7.2
5.0
VR = 63 V DC
4700 35.7 × 55.7 30
6800 35.7 × 80.7 22
10000 35.7 × 105.7 14
15000 51.6 × 80.7 9.5
22000 51.6 × 105.7 7.0
33000 64.3 × 105.7 5.5
47000 64.3 × 105.7 4.8
68000 76.9 × 105.7 3.3
100000 76.9 × 143.2 3.3
60
64
46
16
14
14
12
9.4
7.8
6.6
15
20
28
31
34
45
45
57
57
9.2
4.4
B415*0A8478M000
B415*0A8688M000
B415*0A8109M000
B415*0A8159M000
B415*0A8229M000
B415*0A8339M00#
B415*0A8479M00#
B415*0A8689M00#
B415*0A8100M00#
44
27
19
14
11
10
12
17
19
25
31
35
39
48
6.0
8.1
9.1
12
15
17
19
23
5.0
5.0
Composition of ordering code
* = Mounting style
# = Design
6 = for capacitors with ring clip/clamp mounting
8 = for capacitors with threaded stud
0 = for capacitors with standard inductance
3 = for capacitors with low inductance (13 nH) -
only capacitors with diameter d ≥ 64.3 mm
Please read Cautions and warnings and
Important notes at the end of this document.
Page 7 of 14
B41560, B41580
Compact ꢀ 105 °C
Technical data and ordering codes
CR
Case
ESRtyp ESRmax Zmax
IAC,max IAC,max IAC,R
Ordering code
100 Hz dimensions 100 Hz 100 Hz 10 kHz 100 Hz 100 Hz 100 Hz (composition see
20 °C
µF
d × l
mm
20 °C 20 °C 20 °C 40 °C 85 °C 105 °C below)
mΩ
mΩ
mΩ
A
A
A
VR = 100 V DC
1500 35.7 × 55.7 52
2200 35.7 × 80.7 35
3300 35.7 × 80.7 24
4700 35.7 × 105.7 18
6800 51.6 × 80.7 12
10000 51.6 × 105.7 7.0
15000 64.3 × 105.7 5.0
22000 76.9 × 105.7 4.0
33000 76.9 × 143.2 3.3
104
70
48
35
24
14
10
90
77
53
39
25
12
10
6.0
8.4
11
16
19
26
30
34
45
57
57
7.0
9.9
12
16
18
24
30
35
44
3.4
B415*0A9158M000
B415*0A9228M000
B415*0A9338M000
B415*0A9478M000
B415*0A9688M000
B415*0A9109M000
B415*0A9159M00#
B415*0A9229M00#
B415*0A9339M00#
4.7
5.7
7.5
8.7
11
15
17
21
6.0
5.0
Composition of ordering code
* = Mounting style
# = Design
6 = for capacitors with ring clip/clamp mounting
8 = for capacitors with threaded stud
0 = for capacitors with standard inductance
3 = for capacitors with low inductance (13 nH) -
only capacitors with diameter d ≥ 64.3 mm
Please read Cautions and warnings and
Important notes at the end of this document.
Page 8 of 14
B41560, B41580
Compact ꢀ 105 °C
Useful life
depending on ambient temperature TA under ripple current operating conditions1)
Frequency factor of permissible ripple current IAC versus frequency f
VR (V DC)
≤ 63
100
c
d= 35.7 mm
d = 51.6 mm
d = 64.3 mm
d = 76.9 mm
a
a
a
b
d
d
e
1) Refer to chapter "General technical information, 5.3 Calculation of useful life" on how to interpret the useful life graphs.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 9 of 14
B41560, B41580
Compact ꢀ 105 °C
Frequency characteristics of ESR
Typical behavior
VR (V DC)
≤ 63
100
c
d = 35.7 mm
d = 51.6 mm
d = 64.3 mm
d = 76.9 mm
a
a
a
b
d
d
e
Impedance Z versus frequency f
Typical behavior at 20 °C
Please read Cautions and warnings and
Important notes at the end of this document.
Page 10 of 14
B41560, B41580
Compact ꢀ 105 °C
Cautions and warnings
Personal safety
The electrolytes used by EPCOS have not only been optimized with a view to the intended
application, but also with regard to health and environmental compatibility. They do not contain
any solvents that are detrimental to health, e.g. dimethyl formamide (DMF) or dimethyl acetamide
(DMAC).
Furthermore, part of the high-voltage electrolytes used by EPCOS are self-extinguishing. They
contain flame-retarding substances which will quickly extinguish any flame that may have been
ignited.
As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce
operating electrolytes. However, in exceptional cases, such materials must be used in order to
achieve specific physical and electrical properties because no safe substitute materials are
currently known. However, the amount of dangerous materials used in our products has been
limited to an absolute minimum. Nevertheless, the following rules should be observed when
handling Al electrolytic capacitors:
Any escaping electrolyte should not come into contact with eyes or skin.
If electrolyte does come into contact with the skin, wash the affected parts immediately with
running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If
symptoms persist, seek medical treatment.
Avoid breathing in electrolyte vapor or mists. Workplaces and other affected areas should be
well ventilated. Clothing that has been contaminated by electrolyte must be changed and
rinsed in water.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 11 of 14
B41560, B41580
Compact ꢀ 105 °C
Product safety
The table below summarize the safety instructions that must be observed without fail. A detailed
description can be found in the relevant sections of chapter "General technical information".
Topic
Safety information
Reference
Chapter "General
technical information"
Polarity
Make sure that polar capacitors are connected
with the right polarity.
1
"Basic construction of
aluminum electrolytic
capacitors"
Reverse voltage
Voltages polarity classes should be prevented by 3.1.6
connecting a diode.
"Reverse voltage"
Upper category
temperature
Do not exceed the upper category temperatur.
7.2
"Maximum permissible
operating temperature"
Maintenance
Make periodic inspections of the capacitors.
10
Before the inspection, make sure that the power "Maintenance"
supply is turned off and carefully discharge the
electricity of the capacitors.
Do not apply any mechanical stress to the
capacitor terminals.
Mounting
position of screw
terminal capacitors
Do not mount the capacitor with the terminals
(safety vent) upside down.
11.1.
"Mounting positions of
capacitors with screw
terminals"
Mounting of
single-ended
capacitors
The internal structure of single-ended capacitors 11.4
might be damaged if excessive force is applied to "Mounting
the lead wires.
considerations for
Avoid any compressive, tensile or flexural stress. single-ended capacitors"
Do not move the capacitor after soldering to PC
board.
Do not pick up the PC board by the soldered
capacitor.
Do not insert the capacitor on the PC board with a
hole space different to the lead space specified.
Robustness of
terminals
The following maximum tightening torques must
not be exceeded when connecting screw
11.3
"Mounting torques"
terminals:
M5: 2 Nm
M6: 2.5 Nm
Soldering
Do not exceed the specified time or temperature 11.5
limits during soldering. "Soldering"
Please read Cautions and warnings and
Important notes at the end of this document.
Page 12 of 14
B41560, B41580
Compact ꢀ 105 °C
Topic
Safety information
Reference
Chapter "General
technical information"
Soldering,
Do not allow halogenated hydrocarbons to come 11.6
cleaning agents
into contact with aluminum electrolytic capacitors. "Cleaning agents"
Passive
Avoid external energy, such as fire or electricity.
8.1
flammability
"Passive flammability"
Active
Avoid overload of the capacitors.
8.2
flammability
"Active flammability"
Reference
Chapter "Capacitors
with screw terminals"
Breakdown strength Do not damage the insulating sleeve, especially
"Screw terminals -
accessories"
of insulating
sleeves
when ring clips are used for mounting.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 13 of 14
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical re-
quirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incum-
bent on the customer to check and decide whether an EPCOS product with the properties de-
scribed in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of passive electronic compon-
ents or failure before the end of their usual service life cannot be completely ruled out
in the current state of the art, even if they are operated as specified. In customer applica-
tions requiring a very high level of operational safety and especially in customer applications
in which the malfunction or failure of a passive electronic component could endanger human
life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured
by means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by
third parties in the event of malfunction or failure of a passive electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as “hazardous”). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order. We also
reserve the right to discontinue production and delivery of products. Consequently, we
cannot guarantee that all products named in this publication will always be available.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver-
sion of the “General Terms of Delivery for Products and Services in the Electrical In-
dustry” published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, EPCOS-JONES, BAOKE, Alu-X, CeraDiode, CSSP, MLSC,
PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMID, SIOV, SIP5D, SIP5K,
UltraCap, WindCap are trademarks registered or pending in Europe and in other countries.
Further information will be found on the Internet at www.epcos.com/trademarks.
Page 14 of 14
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明