B41695A0397Q009 [EPCOS]
CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 75V, 390uF, THROUGH HOLE MOUNT, AXIAL LEADED;
| 型号： | B41695A0397Q009 |
| 厂家： | 
EPCOS |
| 描述： | CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 75V, 390uF, THROUGH HOLE MOUNT, AXIAL LEADED |
| 文件： | 总17页 (文件大小：476K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Aluminum electrolytic capacitors
Axial-lead and soldering star capacitors
Series/Type:
B41695, B41795
Date:
February 2011
© EPCOS AG 2011. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
Axial-lead and soldering star capacitors
B41695, B41795
Compact ꢀ up to 150 °C
Applications
Compact design for automotive applications
Features
Up to 150 °C operating temperature up to 55 V DC
Rated voltage up to 100 V upon request
High ripple current capability
High vibration resistance
Long useful life
Compact design
Optimized CV value
Shelf life up to 15 years at storage temperatures up to 40 °C.
To ensure solderability, the capacitors should be built into the
application within one year of delivery. After a total of two
years' storage, the operating voltage must be applied for one
hour to ensure the specified leakage current.
Construction
Charge/discharge-proof, polar
Aluminum case with insulating sleeve
Negative pole connected to case
Terminals
Axial leads, welded to ensure perfect electrical contact
Also available with soldering stars
Taping and Packing
Axial-lead capacitors will be delivered in pallet package.
Capacitors with d × l ≤ 16 × 30 mm are also available taped
on reel.
Soldering star capacitors are packed in cardboard.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 2 of 17
B41695, B41795
Compact ꢀ up to 150 °C
Specifications and characteristics in brief
Rated voltage VR
25 ... 75 V DC
1.15 ꢁ VR
Surge voltage VS
Rated capacitance CR
Capacitance tolerance
220 ... 6800 µF
ꢀ10/+30% ꢂ Q
Leakage current Ileak
(5 min, 20 °C)
Self-inductance ESL1)
Diameter d (mm)
12
14
16
18
20/21
Terminals
Length l (mm) Approx. ESL (nH)
axial
25
ꢀ
ꢀ
21
ꢀ
ꢀ
ꢀ
6
22
ꢀ
24
ꢀ
ꢀ
6
ꢀ
ꢀ
29
33
ꢀ
ꢀ
8
ꢀ
ꢀ
29
30
39
49
ꢀ
38
ꢀ
34
38
ꢀ
45
50
ꢀ
soldering star 25
ꢀ
30
39
49
7
10
11
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
9
13
14
ꢀ
Useful life
Requirements:
∆C/C ≤ ±30% of initial value
ESR ≤ 3 times initial specified limit
Ileak ≤ initial specified limit
*)
150 °C; Vop; 0.5 ꢁ IAC,R
> 1000 h
> 1000 h
> 3000 h
> 8000 h
> 200000 h
140 °C; VR; IAC,R
125 °C; VR; IAC, R
85 °C; VR; IAC, max
40 °C; VR; 2.1 ꢁ IAC, R
*)
V : see useful life graph
op
Voltage endurance test
Post test requirements:
125 °C; VR
2000 h
∆C/C ≤ ±10% of initial value
ESR ≤ 1.3% initial specified limit
Ileak
≤ initial specified limit
Vibration resistance test To IEC 60068-2-6, test Fc:
Frequency range 10 Hz ... 2 kHz, displacement amplitude max.
1.5 mm, acceleration max. 20 g, duration 3 × 2 h.
Capacitor mounted by its wire leads at a distance of (6 ±1) mm from
the case and additionally clamped by the case.
IEC climatic category
To IEC 60068-1:
55/125/56 (ꢀ55 °C/+125 °C/56 days damp heat test)
Detail specification
Sectional specification
Similar to CECC 30301-802
IEC 60384-4
1) If optimum circuit design is used, the values are lower by 30%.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 3 of 17
B41695, B41795
Compact ꢀ up to 150 °C
B41695, Axial-lead capacitors
Dimensional drawing
Dimensions, weights and packing units
d × l
dmax × Imax
Approx. weight
Packing units (pcs.)
mm
mm
g
Pallet
288
200
200
180
180
160
160
140
140
110
Reel
12 × 30
14 × 25
14 × 30
16 × 30
16 × 39
18 × 30
18 × 39
20 × 29
21 × 39
21 × 49
12.5 × 30.5
14.5 × 25.5
14.5 × 30.5
16.5 × 30.5
16.5 × 40
18.5 × 30.5
18.5 × 40
20.5 × 29.5
21.5 × 40
21.5 × 50
5.1
450
350
350
250
ꢀ
5.7
6.8
8.9
11.7
11.1
14.7
13.5
20.0
25.0
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Please read Cautions and warnings and
Important notes at the end of this document.
Page 4 of 17
B41695, B41795
Compact ꢀ up to 150 °C
B41795, Soldering star capacitors
Dimensional drawings
Mounting holes d = 12 mm ... 14 mm
Mounting holes d = 16 mm ... 21 mm
Dimensions, weights and packing units
d × l
d
max × Imax
c ±0.1
mm
e ±0.1
Approx. weight Packing units
mm
mm
mm
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.5
3.5
g
pcs.
480
480
480
300
200
300
200
324
264
12 × 30
14 × 25
14 × 30
16 × 30
16 × 39
18 × 30
18 × 39
21 × 39
21 × 49
13.5 × 32
15.5 × 27
15.5 × 32
17.5 × 32
17.5 × 41.5
19.5 × 32
19.5 × 41.5
22.5 × 41.5
22.5 × 51.5
12.5
14.5
14.5
16.5
16.5
18.5
18.5
21.5
21.5
5.4
6.1
7.2
9.4
12.2
11.8
15.4
21.0
26.0
Please read Cautions and warnings and
Important notes at the end of this document.
Page 5 of 17
B41695, B41795
Compact ꢀ up to 150 °C
Overview of available types
VR (V DC)
25
40
63
75
Case dimensions d × l (mm)
CR (µF)
220
12 × 30
14 × 30
16 × 30
16 × 39
12 × 30
14 × 30
270
330
390
16 × 30
16 × 39
470
12 × 30
560
680
12 × 30
14 × 25
14 × 30
16 × 30
860
18 × 39
20 × 29
1000
1100
1200
1500
1800
2200
18 × 39
20 × 29
21 × 39
21 × 49
16 × 30
18 × 30
16 × 39
21 × 39
21 × 49
18 × 39
20 × 29
3300
18 × 39
20 × 29
21 × 39
4400
5000
6800
21 × 49
21 × 39
21 × 49
Please read Cautions and warnings and
Important notes at the end of this document.
Page 6 of 17
B41695, B41795
Compact ꢀ up to 150 °C
Case dimensions and ordering codes
VR
CR
100 Hz
20 °C
Case
Ordering code
Ordering code
Axial reel
Ordering code
Soldering star
dimensions Axial pallet
d × l
V DC µF
mm
25
40
63
75
680
12 × 30
14 × 25
16 × 30
18 × 30
18 × 39
20 × 29
21 × 39
21 × 49
12 × 30
14 × 30
16 × 30
16 × 39
18 × 39
20 × 29
21 × 39
21 × 49
12 × 30
14 × 30
16 × 30
16 × 39
18 × 39
20 × 29
21 × 39
21 × 49
12 × 30
14 × 30
16 × 30
16 × 39
18 × 39
20 × 29
21 × 39
21 × 49
B41695A5687Q007 B41695A5687Q009 B41795A5687Q000
B41695A5108Q007 B41695A5108Q009 B41795A5108Q000
B41695A5158Q007 B41695A5158Q009 B41795A5158Q000
1000
1500
2200
3300
3300
5000
6800
470
B41695A5228Q007
B41695A5338Q007
B41695B5338Q007
B41695A5508Q007
B41695A5688Q007
B41795A5228Q000
B41795A5338Q000
B41795A5508Q000
B41795A5688Q000
B41695A7477Q007 B41695A7477Q009 B41795A7477Q000
B41695A7687Q007 B41695A7687Q009 B41795A7687Q000
B41695A7108Q007 B41695A7108Q009 B41795A7108Q000
680
1000
1500
2200
2200
3300
4400
220
330
470
680
1000
1100
1800
2200
220
270
390
560
860
B41695A7158Q007
B41695A7228Q007
B41695B7228Q007
B41695A7338Q007
B41695A7448Q007
B41795A7158Q000
B41795A7228Q000
B41795A7338Q000
B41795A7448Q000
B41695A8227Q007 B41695A8227Q009 B41795A8227Q000
B41695A8337Q007 B41695A8337Q009 B41795A8337Q000
B41695A8477Q007 B41695A8477Q009 B41795A8477Q000
B41695A8687Q007
B41695A8108Q007
B41695A8118Q007
B41695A8188Q007
B41695A8228Q007
B41795A8687Q000
B41795A8108Q000
B41795A8188Q000
B41795A8228Q000
B41695A0227Q007 B41695A0227Q009 B41795A0227Q000
B41695A0277Q007 B41695A0277Q009 B41795A0277Q000
B41695A0397Q007 B41695A0397Q009 B41795A0397Q000
B41695A0567Q007
B41695A0867Q007
B41695B0867Q007
B41695A0128Q007
B41695A0188Q007
B41795A0567Q000
B41795A0867Q000
860
1200
1800
B41795A0128Q000
B41795A0188Q000
Variant with different case dimensions
Please read Cautions and warnings and
Important notes at the end of this document.
Page 7 of 17
B41695, B41795
Compact ꢀ up to 150 °C
Technical data
CR ESRtyp ESRmax ESRmax ESRmax Zmax
1)
IAC,max IAC,max IAC,max IAC,R
IAC,max
100 Hz 100 Hz 100 Hz 100 Hz 10 kHz 100 kHz 10 kHz 10 kHz 10 kHz 10 kHz 10 kHz
20 °C
µF
20 °C 20 °C ꢀ40 °C 20 °C 20 °C
85 °C 105 °C 125 °C 125 °C 150 °C
mΩ
mΩ
mΩ
mΩ
mΩ
A
A
A
A
A
VR = 25 V DC
680
1000
1500
2200
3300
3300
5000
6800
190
135
90
65
45
40
28
22
320
230
155
110
75
70
48
36
2800
1900
1200
950
700
700
240
170
115
85
58
53
220
160
105
80
55
50
3.2
3.6
4.7
5.8
8.1
8.1
11.5
14.5
2.75 2.1
1.4
1.55
2.05
2.5
3.5
3.5
5.0
6.3
0.7
0.75
1.0
1.2
1.7
1.7
2.5
3.1
3.1
4.0
5.0
7.0
7.0
2.35
3.0
3.8
5.3
5.3
7.5
9.5
500
350
36
28
35
28
10
12.6
VR = 40 V DC
470
680
175
125
90
60
45
41
28
22
290
205
145
100
75
68
45
35
3000
2200
1500
1000
700
700
500
350
185
135
95
65
50
45
30
23
180
130
91
62
48
44
30
25
3.5
4.4
5.3
7.3
8.3
8.5
12.0
15.2
3.0
3.8
4.6
6.4
7.2
7.3
10.4
13.3
2.3
2.85
3.45
4.8
5.4
5.5
7.8
9.9
1.5
1.9
2.3
3.2
3.6
3.7
5.2
6.6
0.75
0.85
1.15
1.6
1.8
1.8
1000
1500
2200
2200
3300
4400
2.6
3.3
VR = 63 V DC
220
330
470
250
170
120
85
62
53
410
275
200
140
100
87
3000
2200
1500
1100
750
700
500
360
200
140
100
70
55
45
190
133
105
67
54
45
3.4
4.3
5.1
7.1
8.2
8.4
12.2
15.2
2.95 2.2
3.75 2.8
1.5
1.9
2.25
3.1
3.6
3.7
5.3
6.6
0.75
0.95
1.1
1.5
1.8
1.8
2.6
3.3
4.5
6.2
3.3
4.6
5.4
5.5
7.9
9.9
680
1000
1100
1800
2200
7.1
7.3
34
27
55
45
30
24
30
24
10.6
13.2
VR = 75 V DC
220
270
390
560
860
860
1200
1800
250
170
120
85
53
62
410
275
200
140
87
100
55
45
3000
2200
1500
1100
700
750
500
360
200
140
100
70
45
55
190
133
105
67
45
54
3.4
4.3
5.1
7.1
8.4
8.2
12.2
15.2
2.95 2.2
3.75 2.8
1.5
1.9
2.25
3.1
3.7
3.6
5.3
6.6
0.75
0.95
1.1
1.5
1.8
1.8
2.6
3.3
4.5
6.2
3.3
4.6
5.5
5.4
7.9
9.9
7.3
7.1
34
27
30
24
30
24
10.6
13.2
Variant with different case dimensions
1) IAC,max (10 kHz, 150 °C) measured at VR = 20 V DC, 35 V DC, 55 V DC, 65 V DC instead of VR = 25 V DC, 40 V DC, 63 V DC, 75 V DC.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 8 of 17
B41695, B41795
Compact ꢀ up to 150 °C
Useful life
1)
depending on ambient temperature TA under ripple current operating conditions at VR
Useful life
1)
depending on case temperature TC under ripple current operating conditions at VR
1) Refer to chapter "General technical information, 5.3 Calculation of useful life" for an explanation on how to interpret the useful life
graphs.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 9 of 17
B41695, B41795
Compact ꢀ up to 150 °C
Useful life
depending on ambient temperature TA under ripple current operating conditions at Vop
2)
VR = 25 V: Vop ≤ 20 V
VR = 63 V: Vop ≤ 55 V
VR = 40 V: Vop ≤ 35 V
VR = 75 V: Vop ≤ 65 V
Useful life
2)
depending on case temperature TC under ripple current operating conditions at Vop
VR = 25 V: Vop ≤ 20 V
VR = 63 V: Vop ≤ 55 V
VR = 40 V: Vop ≤ 35 V
VR = 75 V: Vop ≤ 65 V
2) Refer to chapter "General technical information, 5.3 Calculation of useful life" for an explanation on how to interpret the useful life
graphs.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 10 of 17
B41695, B41795
Compact ꢀ up to 150 °C
Frequency factor of permissible ripple
current IAC versus frequency f
Frequency characteristics of ESR
Typical behavior
Equivalent series resistance ESR
versus frequency f
Impedance Z
versus frequency f
Typical behavior for 2200 µF/40 V
Typical behavior for 2200 µF/40 V
Please read Cautions and warnings and
Important notes at the end of this document.
Page 11 of 17
B41695, B41795
Compact ꢀ up to 150 °C
Cautions and warnings
Personal safety
The electrolytes used by EPCOS have not only been optimized with a view to the intended
application, but also with regard to health and environmental compatibility. They do not contain
any solvents that are detrimental to health, e.g. dimethyl formamide (DMF) or dimethyl acetamide
(DMAC).
Furthermore, part of the high-voltage electrolytes used by EPCOS are self-extinguishing. They
contain flame-retarding substances which will quickly extinguish any flame that may have been
ignited.
As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce
operating electrolytes. However, in exceptional cases, such materials must be used in order to
achieve specific physical and electrical properties because no safe substitute materials are
currently known. However, the amount of dangerous materials used in our products has been
limited to an absolute minimum. Nevertheless, the following rules should be observed when
handling aluminum electrolytic capacitors:
Any escaping electrolyte should not come into contact with eyes or skin.
If electrolyte does come into contact with the skin, wash the affected parts immediately with
running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If
symptoms persist, seek medical treatment.
Avoid breathing in electrolyte vapor or mists. Workplaces and other affected areas should be
well ventilated. Clothing that has been contaminated by electrolyte must be changed and
rinsed in water.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 12 of 17
B41695, B41795
Compact ꢀ up to 150 °C
Product safety
The table below summarizes the safety instructions that must be observed without fail. A detailed
description can be found in the relevant sections of chapter "General technical information".
Topic
Safety information
Reference
chapter "General
technical information"
Polarity
Make sure that polar capacitors are connected
with the right polarity.
1
"Basic construction of
aluminum electrolytic
capacitors"
Reverse voltage
Voltages polarity classes should be prevented by 3.1.6
connecting a diode.
"Reverse voltage"
Upper category
temperature
Do not exceed the upper category temperature.
7.2
"Maximum permissible
operating temperature"
Maintenance
Make periodic inspections of the capacitors.
10
Before the inspection, make sure that the power "Maintenance"
supply is turned off and carefully discharge the
electricity of the capacitors.
Do not apply any mechanical stress to the
capacitor terminals.
Mounting
position of screw-
terminal capacitors
Do not mount the capacitor with the terminals
(safety vent) upside down.
11.1.
"Mounting positions of
capacitors with screw
terminals"
Mounting of
single-ended
capacitors
The internal structure of single-ended capacitors 11.4
might be damaged if excessive force is applied to "Mounting
the lead wires.
considerations for
Avoid any compressive, tensile or flexural stress. single-ended capacitors"
Do not move the capacitor after soldering to PC
board.
Do not pick up the PC board by the soldered
capacitor.
Do not insert the capacitor on the PC board with a
hole space different to the lead space specified.
Robustness of
terminals
The following maximum tightening torques must
not be exceeded when connecting screw
11.3
"Mounting torques"
terminals:
M5: 2 Nm
M6: 2.5 Nm
Soldering
Do not exceed the specified time or temperature 11.5
limits during soldering. "Soldering"
Please read Cautions and warnings and
Important notes at the end of this document.
Page 13 of 17
B41695, B41795
Compact ꢀ up to 150 °C
Topic
Safety information
Reference
chapter "General
technical information"
Soldering,
cleaning agents
Do not allow halogenated hydrocarbons to come 11.6
into contact with aluminum electrolytic capacitors. "Cleaning agents"
Passive
Avoid external energy, such as fire or electricity.
8.1
flammability
"Passive flammability"
Active
Avoid overload of the capacitors.
8.2
flammability
"Active flammability"
Reference
chapter "Capacitors with
screw terminals"
Breakdown strength Do not damage the insulating sleeve, especially
"Screw terminals ꢀ
of insulating
sleeves
when ring clips are used for mounting.
accessories"
Please read Cautions and warnings and
Important notes at the end of this document.
Page 14 of 17
B41695, B41795
Compact ꢀ up to 150 °C
Symbols and terms
Symbol English
German
C
Capacitance
Kapazität
CR
Rated capacitance
Nennkapazität
CS
Series capacitance
Serienkapazität
CS,T
Cf
Series capacitance at temperature T
Capacitance at frequency f
Case diameter, nominal dimension
Maximum case diameter
Self-inductance
Serienkapazität bei Temperatur T
Kapazität bei Frequenz f
Gehäusedurchmesser, Nennmaß
Maximaler Gehäusedurchmesser
Eigeninduktivität
d
dmax
ESL
ESR
ESRf
Equivalent series resistance
Equivalent series resistance at
frequency f
Ersatzserienwiderstand
Ersatzserienwiderstand bei Frequenz f
ESRT
Equivalent series resistance at
temperature T
Ersatzserienwiderstand bei Temperatur T
f
Frequency
Frequenz
I
Current
Strom
IAC
Alternating current (ripple current)
Root-mean-square value of alternating
current
Wechselstrom
Wechselstrom, Effektivwert
IAC,rms
IAC,f
Ripple current at frequency f
Maximum permissible ripple current
Rated ripple current
Wechselstrom bei Frequenz f
Maximal zulässiger Wechselstrom
Nennwechselstrom
IAC,max
IAC,R
IAC,R (B) Rated ripple current for base cooling
Nennwechselstromstrom für Bodenkühlung
Reststrom
Ileak
Ileak,op
l
Leakage current
Operating leakage current
Case length, nominal dimension
Maximum case length (without
terminals and mounting stud)
Resistance
Betriebsreststrom
Gehäuselänge, Nennmaß
Maximale Gehäuselänge (ohne Anschlüsse
und Gewindebolzen)
Widerstand
lmax
R
Rins
Rsymm
T
Insulation resistance
Balancing resistance
Temperature
Isolationswiderstand
Symmetrierwiderstand
Temperatur
∆T
TA
TC
TB
t
Temperature difference
Ambient temperature
Case temperature
Temperaturdifferenz
Umgebungstemperatur
Gehäusetemperatur
Capacitor base temperature
Time
Temperatur des Becherbodens
Zeit
∆t
Period
Zeitraum
tb
Service life (operating hours)
Brauchbarkeitsdauer (Betriebszeit)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 15 of 17
B41695, B41795
Compact ꢀ up to 150 °C
Symbol English
German
V
Voltage
Spannung
VF
Vop
VR
VS
XC
XL
Z
Forming voltage
Formierspannung
Operating voltage
Rated voltage, DC voltage
Surge voltage
Betriebsspannung
Nennspannung, Gleichspannung
Spitzenspannung
Capacitive reactance
Inductive reactance
Impedance
Kapazitiver Blindwiderstand
Induktiver Blindwiderstand
Scheinwiderstand
ZT
tan δ
λ
Impedance at temperature T
Dissipation factor
Scheinwiderstand bei Temperatur T
Verlustfaktor
Failure rate
Ausfallrate
ε0
Absolute permittivity
Relative permittivity
Angular velocity; 2 ꢁ π ꢁ f
Elektrische Feldkonstante
Dielektrizitätszahl
εr
ω
Kreisfrequenz; 2 ꢁ π ꢁ f
Note
All dimensions are given in mm.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 16 of 17
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical re-
quirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incum-
bent on the customer to check and decide whether an EPCOS product with the properties de-
scribed in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by
third parties in the event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Ma-
terial Data Sheets on the Internet (www.epcos.com/material). Should you have any more de-
tailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order. We also
reserve the right to discontinue production and delivery of products. Consequently, we
cannot guarantee that all products named in this publication will always be available. The
aforementioned does not apply in the case of individual agreements deviating from the fore-
going for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver-
sion of the "General Terms of Delivery for Products and Services in the Electrical In-
dustry" published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DeltaCap,
DigiSiMic, DSSP, FormFit, MiniBlue, MiniCell, MKK, MKD, MLSC, MotorCap, PCC,
PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap,
SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trade-
marks registered or pending in Europe and in other countries. Further information will be
found on the Internet at www.epcos.com/trademarks.
Page 17 of 17
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明