B43511A5827M087 [EPCOS]
CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 450V, 820uF, THROUGH HOLE MOUNT, ROHS AND REACH COMPLIANT;
| 型号： | B43511A5827M087 |
| 厂家： | 
EPCOS |
| 描述： | CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 450V, 820uF, THROUGH HOLE MOUNT, ROHS AND REACH COMPLIANT 电容器 |
| 文件： | 总19页 (文件大小：830K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Aluminum electrolytic capacitors
Capacitors with 4-pin snap-in terminals and solder
pins
Series/Type:
B43511, B43521
Date:
November 2012
© EPCOS AG 2012. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
Capacitors with 4-pin snap-in terminals and solder pins
B43511, B43521
Outstanding ripple current ꢁ 85 °C
Long-life grade capacitors
Applications
Frequency converters
Solar inverters
Uninterruptible power supplies
Professional power supplies
Medical appliances
B43511
B43521
Features
Voltage derating (0.95 ꢀ VR) enables 105 °C operation,
more details available upon request
Long useful life
Outstanding ripple current capability
High volumetric efficiency
Many different case sizes
Pinning ensures correct insertion
RoHS-compatible
Construction
Charge/discharge-proof, polar
Aluminum case, fully insulated with PVC
Version with additional PET insulation cap on terminal side
available for insulating the capacitor from the PCB (B43511
only)
Overload protection by safety vent on the case wall
Terminals
4-pin snap-in terminals (6.3 mm and 4.5 mm length)
Solder pin mounting on printed circuit boards, pins fit
standardized spacings on PCB
Please read Cautions and warnings and
Important notes at the end of this document.
Page 2 of 19
B43511, B43521
Outstanding ripple current ꢁ 85 °C
Specifications and characteristics in brief
Rated voltage VR
Surge voltage VS
350 ... 450 V DC
1.1 ꢀ VR
Rated capacitance CR 390 ... 2200 µF
Capacitance tolerance ±20% ꢂ M
Dissipation factor tan δ
(20 °C, 120 Hz)
VR ≤ 400 V DC: tan δ ≤ 0.15
VR > 400 V DC: tan δ ≤ 0.20
Leakage current Ileak
(5 min, 20 °C)
Self-inductance ESL
Useful life1)
Approx. 20 nH
Requirements:
85 °C; VR; IAC,R
> 12000 h
∆C/C
≤ ±20% of initial value
≤ 2 times initial specified limit
≤ initial specified limit
40 °C; VR; 1.6 ꢀ IAC,R
> 200000 h tan δ
Ileak
Voltage endurance test
Post test requirements:
≤ ±10% of initial value
≤ 1.3 times initial specified limit
≤ initial specified limit
85 °C; VR
3000 h
∆C/C
tan δ
Ileak
Vibration resistance
test
To IEC 60068-2-6, test Fc:
Frequency range 10 ... 55 Hz, displacement amplitude 0.35 mm,
acceleration max. 5 g, duration 3 × 2 h.
Capacitor mounted by its body which is rigidly clamped to the work
surface.
Characteristics at low
temperature
Max. impedance ratio
at 100 Hz
VR
≤ 400 V > 400 V
Z -25
Z -40
°
°
C / Z 20
C / Z 20
°
°
4
7
7
C
C
14
IEC climatic category
To IEC 60068-1:
V
R ≤ 400 V DC: 40/085/56 (ꢁ40 °C/+85 °C/56 days damp heat test)
VR > 400 V DC: 25/085/56 (ꢁ25 °C/+85 °C/56 days damp heat test)
The capacitors can be operated in the temperature range of
ꢁ40 °C to +85 °C but the impedance at ꢁ40 °C should be taken into
consideration.
Detail specification
Similar to CECC 30301-805
Sectional specification IEC 60384-4
1) Refer to chapter "General technical information, 5 Useful life" on how to interpret useful life.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 3 of 19
B43511, B43521
Outstanding ripple current ꢁ 85 °C
Dimensional drawings
B43511, 4-pin snap-in terminals, PVC insulation
Dimensions
(mm)
Approx.
weight (g)
Packing
units (pcs.)
d +1 l ±2
35
50
60
63
76
60
36
36
36
36
33
33
33
33
33
33
28
28
28
28
28
28
35
35
35
35
40
40
40
40
40
40
45
45
45
45
45
45
70
88
80
101
126
71
100
40
50
89
60
107
125
143
178
90
70
80
100
40
50
113
136
158
181
226
60
70
80
100
Standard snap-in terminals:
length (6.3 ±1) mm.
Also available with length of (4.5 ꢁ1) mm.
All pin holes must be drilled into the
PC-board, since the unconnected pins serve
as mountings. These pins must be soldered
to isolated pads or pads with the same
potential as the negative pole.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 4 of 19
B43511, B43521
Outstanding ripple current ꢁ 85 °C
B43511, 4-pin snap-in terminals, PVC insulation and PET insulation cap on terminal side
Dimensions
(mm)
Approx.
weight (g) units (pcs.)
Packing
d +1.4 l +2.2/ꢁ2
35
35
35
35
35
40
40
40
40
40
40
45
45
45
45
45
45
50
60
63
76
60
36
36
36
36
33
33
33
33
33
33
28
28
28
28
28
28
70
88
80
101
126
71
100
40
50
89
60
107
125
143
178
90
70
80
100
40
50
113
136
158
181
226
60
70
80
100
Standard snap-in terminals:
length (6.3 +1/ꢁ1.4) mm. Also available with
length of (4.5 ꢁ1.4) mm. PET insulation cap is
positioned under the insulation sleeve.
All pin holes must be drilled into the PC-board,
since the unconnected pins serve as mountings.
These pins must be soldered to isolated pads or
pads with the same potential as the negative
pole.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 5 of 19
B43511, B43521
Outstanding ripple current ꢁ 85 °C
B43521, solder pins
Pole markings: Plus: +; Minus: ꢁ
All pin holes must be drilled into the PC-board, since the unconnected pins serve as mountings.
These pins must be soldered to isolated pads or pads with the same potential as the negative
pole.
Dimensions
(mm)
Approx.
weight (g) units (pcs.)
Packing
d +1 Imax
35
35
35
35
35
40
40
40
40
40
40
54
64
63
76
60
36
36
36
36
33
33
33
33
33
33
74
88
84
101
126
71
104
44
54
89
64
107
125
143
178
74
84
104
Please read Cautions and warnings and
Important notes at the end of this document.
Page 6 of 19
B43511, B43521
Outstanding ripple current ꢁ 85 °C
Packing of 4-pin snap-in terminal and solder pin capacitors
For ecological reasons the packing is pure cardboard.
Ordering codes for terminal styles and insulation features
Identification in 3rd block of ordering code
4-pin snap-in terminal capacitors
Terminal version
Insulation version
PVC
PVC plus PET cap
M080
Standard terminals 6.3 mm
Short terminals 4.5 mm
M000
M007
M087
Ordering examples:
B43511A9188M007
}
}
4-pin snap-in capacitor with short terminals and standard PVC
insulation
B43511A9188M080
4-pin snap-in capacitor with standard terminals and PVC insulation
with additional PET insulation cap on terminal side
Please read Cautions and warnings and
Important notes at the end of this document.
Page 7 of 19
B43511, B43521
Outstanding ripple current ꢁ 85 °C
Overview of available types
VR (V DC)
350
400
420
450
Case dimensions d × l (mm)
CR (µF)
390
35 × 50
40 × 40
470
35 × 50
40 × 40
35 × 50
40 × 40
35 × 60
40 × 50
45 × 40
560
680
35 × 50
35 × 60
45 × 40
35 × 60
40 × 50
35 × 70
40 × 60
35 × 60
40 × 50
35 × 70
40 × 60
45 × 50
35 × 70
40 × 60
45 × 50
35 × 80
40 × 60
45 × 50
820
1000
1500
35 × 70
40 × 60
35 × 80
40 × 60
35 × 80
40 × 70
45 × 50
40 × 70
45 × 60
35 × 80
40 × 60
45 × 50
35 × 100
40 × 70
45 × 60
35 × 100
40 × 80
45 × 60
40 × 100
45 × 70
40 × 80
45 × 70
40 × 100
45 × 80
40 × 100
45 × 80
45 × 100
1800
2200
45 × 100
45 × 100
45 × 100
The capacitance and voltage ratings listed above are available in different cases upon request.
Other voltage and capacitance ratings are also available upon request.
Capacitors with solder pins are only available in 35 and 40 mm case diameters.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 8 of 19
B43511, B43521
Outstanding ripple current ꢁ 85 °C
Technical data and ordering codes
CR
Case
ESRtyp
Zmax
IAC,max
100 Hz
60 °C
A
IAC,R
Ordering code
(composition see
below)
100 Hz
20 °C
µF
dimensions 100 Hz
d × l
mm
10 kHz
20 °C
mΩ
100 Hz
85 °C
A
20 °C
mΩ
VR = 350 V DC
560
680
680
820
820
1000
1000
1000
1500
1500
2200
35 × 50
160
140
140
110
110
90
90
90
60
60
190
150
150
130
130
110
110
110
70
5.7
6.7
6.6
7.8
7.8
9.2
8.6
8.1
3.2
3.7
3.7
4.4
4.3
5.1
4.8
4.5
6.5
6.2
8.6
B435*1A4567M0##
B435*1A4687M0##
B435*1C4687M0##
B435*1A4827M0##
B435*1C4827M0##
B435*1A4108M0##
B435*1C4108M0##
B43511E4108M0##
B435*1A4158M0##
B43511C4158M0##
B43511A4228M0##
35 × 60
40 × 50
35 × 70
40 × 60
35 × 80
40 × 60
45 × 50
40 × 80
45 × 70
45 × 100
11.8
11.2
15.6
70
50
50
VR = 400 V DC
470
470
560
560
680
680
680
820
35 × 50
190
190
160
160
140
140
140
110
220
220
190
190
150
150
150
130
5.2
5.1
6.1
5.6
7.1
7.1
6.6
8.3
2.9
2.8
3.4
3.1
4.0
3.9
3.7
4.6
B435*1A9477M0##
B435*1C9477M0##
B435*1A9567M0##
B43511C9567M0##
B435*1A9687M0##
B435*1C9687M0##
B43511E9687M0##
B435*1A9827M0##
40 × 40
35 × 60
45 × 40
35 × 70
40 × 60
45 × 50
35 × 80
Capacitors with solder pins are only available in 35 and 40 mm case diameters.
Composition of ordering code
* = Terminal type
1 = 4-pin snap-in terminals
## = Terminal style and insulation feature
00 = solder pin or 4-pin snap-in standard
terminals and PVC insulation
2 = solder pin
07 = 4-pin snap-in short terminals and PVC
insulation
80 = 4-pin snap-in standard terminals and PVC
insulation with additional PET insulation cap
on terminal side
87 = 4-pin snap-in short terminals and PVC
insulation with additional PET insulation cap
on terminal side
Please read Cautions and warnings and
Important notes at the end of this document.
Page 9 of 19
B43511, B43521
Outstanding ripple current ꢁ 85 °C
Technical data and ordering codes
CR
Case
ESRtyp
Zmax
IAC,max
100 Hz
60 °C
A
IAC,R
Ordering code
(composition see
below)
100 Hz
20 °C
µF
dimensions 100 Hz
d × l
mm
10 kHz
20 °C
mΩ
100 Hz
85 °C
A
20 °C
mΩ
VR = 400 V DC
820
1000
1000
1000
1500
1500
1800
40 × 60
110
90
90
90
60
60
50
130
110
110
110
70
7.8
10.1
9.1
4.3
5.6
5.1
4.8
7.2
6.5
7.8
B435*1C9827M0##
B435*1C9108M0##
B435*1A9108M0##
B43511B9108M0##
B435*1A9158M0##
B43511C9158M0##
B43511A9188M0##
35 × 100
40 × 70
45 × 60
40 × 100
45 × 80
45 × 100
8.6
12.9
11.8
14.1
70
60
VR = 420 V DC
470
470
560
560
680
680
680
820
820
35 × 50
320
320
270
270
230
230
230
190
190
190
160
160
160
110
110
90
340
340
290
290
240
240
240
200
200
200
160
160
160
110
110
90
5.2
5.1
6.1
6.0
7.1
7.1
6.6
8.3
8.2
2.9
2.8
3.4
3.3
4.0
3.9
3.7
4.6
4.6
4.1
5.6
5.3
4.8
7.2
6.5
7.8
B435*1A0477M0##
B435*1C0477M0##
B435*1A0567M0##
B435*1C0567M0##
B435*1A0687M0##
B435*1C0687M0##
B43511E0687M0##
B435*1A0827M0##
B435*1C0827M0##
B43511E0827M0##
B435*1A0108M0##
B435*1C0108M0##
B43511E0108M0##
B435*1A0158M0##
B43511C0158M0##
B43511A0188M0##
40 × 40
35 × 60
40 × 50
35 × 70
40 × 60
45 × 50
35 × 80
40 × 70
45 × 50
35 × 100
40 × 80
45 × 60
40 × 100
45 × 80
45 × 100
820
7.3
10.1
9.6
1000
1000
1000
1500
1500
1800
8.6
12.9
11.8
14.1
Capacitors with solder pins are only available in 35 and 40 mm case diameters.
Composition of ordering code
* = Terminal type
1 = 4-pin snap-in terminals
## = Terminal style and insulation feature
00 = solder pin or 4-pin snap-in standard
terminals and PVC insulation
2 = solder pin
07 = 4-pin snap-in short terminals and PVC
insulation
80 = 4-pin snap-in standard terminals and PVC
insulation with additional PET insulation cap
on terminal side
87 = 4-pin snap-in short terminals and PVC
insulation with additional PET insulation cap
on terminal side
Please read Cautions and warnings and
Important notes at the end of this document.
Page 10 of 19
B43511, B43521
Outstanding ripple current ꢁ 85 °C
Technical data and ordering codes
CR
Case
ESRtyp
Zmax
IAC,max
100 Hz
60 °C
A
IAC,R
Ordering code
(composition see
below)
100 Hz
20 °C
µF
dimensions 100 Hz
d × l
mm
10 kHz
20 °C
mΩ
100 Hz
85 °C
A
20 °C
mΩ
VR = 450 V DC
390
390
470
470
470
560
560
680
680
680
820
820
1000
1000
1500
35 × 50
390
390
320
320
320
270
270
230
230
230
190
190
160
160
110
410
410
340
340
340
290
290
240
240
240
200
200
160
160
110
4.7
4.6
5.6
5.5
5.1
6.5
6.4
7.5
7.1
6.6
8.2
7.8
10.5
9.1
12.9
2.6
2.6
3.1
3.1
2.9
3.6
3.6
4.2
3.9
3.7
4.6
4.3
5.8
5.1
7.1
B435*1A5397M0##
B435*1C5397M0##
B435*1A5477M0##
B435*1C5477M0##
B43511E5477M0##
B435*1A5567M0##
B435*1C5567M0##
B435*1A5687M0##
B435*1C5687M0##
B43511E5687M0##
B435*1A5827M0##
B43511C5827M0##
B435*1A5108M0##
B43511C5108M0##
B43511A5158M0##
40 × 40
35 × 60
40 × 50
45 × 40
35 × 70
40 × 60
35 × 80
40 × 60
45 × 50
40 × 70
45 × 60
40 × 100
45 × 70
45 × 100
Capacitors with solder pins are only available in 35 and 40 mm case diameters.
Composition of ordering code
* = Terminal type
1 = 4-pin snap-in terminals
## = Terminal style and insulation feature
00 = solder pin or 4-pin snap-in standard
terminals and PVC insulation
2 = solder pin
07 = 4-pin snap-in short terminals and PVC
insulation
80 = 4-pin snap-in standard terminals and PVC
insulation with additional PET insulation cap
on terminal side
87 = 4-pin snap-in short terminals and PVC
insulation with additional PET insulation cap
on terminal side
Please read Cautions and warnings and
Important notes at the end of this document.
Page 11 of 19
B43511, B43521
Outstanding ripple current ꢁ 85 °C
Useful life1)
depending on ambient temperature TA under ripple current operating conditions
Voltage derating (0.95 ꢀ VR) enables 105 °C operation
Frequency factor of permissible
Frequency characteristics of ESR
ripple current IAC versus frequency f
Typical behavior
1) Refer to chapter "General technical information, 5 Useful life" on how to interpret useful life.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 12 of 19
B43511, B43521
Outstanding ripple current ꢁ 85 °C
Impedance Z versus frequency f
Typical behavior at 20 °C
Please read Cautions and warnings and
Important notes at the end of this document.
Page 13 of 19
B43511, B43521
Outstanding ripple current ꢁ 85 °C
Cautions and warnings
Personal safety
The electrolytes used by EPCOS have been optimized both with a view to the intended
application and with regard to health and environmental compatibility. They do not contain any
solvents that are detrimental to health, e.g. dimethyl formamide (DMF) or dimethyl acetamide
(DMAC).
Furthermore, some of the high-voltage electrolytes used by EPCOS are self-extinguishing.
As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce
operating electrolytes. However, in exceptional cases, such materials must be used in order to
achieve specific physical and electrical properties because no alternative materials are currently
known. However, the amount of dangerous materials used in our products is limited to an
absolute minimum.
Materials and chemicals used in EPCOS aluminum electrolytic capacitors are continuously
adapted in compliance with the EPCOS Corporate Environmental Policy and the latest EU
regulations and guidelines such as RoHS, REACH/SVHC, GADSL, and ELV.
MDS (Material Data Sheets) are available on the EPCOS website for all types listed in the data
book. MDS for customer specific capacitors are available upon request.
MSDS (Material Safety Data Sheets) are available for all of our electrolytes upon request.
Nevertheless, the following rules should be observed when handling aluminum electrolytic
capacitors: No electrolyte should come into contact with eyes or skin. If electrolyte does come
into contact with the skin, wash the affected areas immediately with running water. If the eyes are
affected, rinse them for 10 minutes with plenty of water. If symptoms persist, seek medical
treatment. Avoid inhaling electrolyte vapor or mists. Workplaces and other affected areas should
be well ventilated. Clothing that has been contaminated by electrolyte must be changed and
rinsed in water.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 14 of 19
B43511, B43521
Outstanding ripple current ꢁ 85 °C
Product safety
The table below summarizes the safety instructions that must be observed without fail. A detailed
description can be found in the relevant sections of chapter "General technical information".
Topic
Safety information
Reference
chapter "General
technical information"
Polarity
Make sure that polar capacitors are connected
with the right polarity.
1
"Basic construction of
aluminum electrolytic
capacitors"
Reverse voltage
Voltages polarity classes should be prevented by 3.1.6
connecting a diode.
"Reverse voltage"
Mounting
position of screw-
terminal capacitors
Do not mount the capacitor with the terminals
(safety vent) upside down.
11.1.
"Mounting positions of
capacitors with screw
terminals"
Robustness of
terminals
The following maximum tightening torques must
not be exceeded when connecting screw
11.3
"Mounting torques"
terminals:
M5: 2.5 Nm
M6: 4.0 Nm
Mounting of
single-ended
capacitors
The internal structure of single-ended capacitors 11.4
might be damaged if excessive force is applied to "Mounting
the lead wires.
considerations for
Avoid any compressive, tensile or flexural stress. single-ended capacitors"
Do not move the capacitor after soldering to PC
board.
Do not pick up the PC board by the soldered
capacitor.
Do not insert the capacitor on the PC board with a
hole space different to the lead space specified.
Soldering
Do not exceed the specified time or temperature 11.5
limits during soldering.
"Soldering"
Soldering,
Do not allow halogenated hydrocarbons to come 11.6
cleaning agents
into contact with aluminum electrolytic capacitors. "Cleaning agents"
Upper category
temperature
Do not exceed the upper category temperature.
7.2
"Maximum permissible
operating temperature"
Passive
Avoid external energy, such as fire or electricity.
8.1
flammability
"Passive flammability"
Please read Cautions and warnings and
Important notes at the end of this document.
Page 15 of 19
B43511, B43521
Outstanding ripple current ꢁ 85 °C
Topic
Safety information
Reference
chapter "General
technical information"
Active
Avoid overload of the capacitors.
8.2
flammability
"Active flammability"
Maintenance
Make periodic inspections of the capacitors.
10
Before the inspection, make sure that the power "Maintenance"
supply is turned off and carefully discharge the
electricity of the capacitors.
Do not apply any mechanical stress to the
capacitor terminals.
Storage
Do not store capacitors at high temperatures or
high humidity. Capacitors should be stored at
+5 to +35 °C and a relative humidity of ≤ 75%.
7.3
Storage conditions
Reference
chapter "Capacitors with
screw terminals"
Breakdown strength Do not damage the insulating sleeve, especially
"Screw terminals ꢁ
of insulating
sleeves
when ring clips are used for mounting.
accessories"
Please read Cautions and warnings and
Important notes at the end of this document.
Page 16 of 19
B43511, B43521
Outstanding ripple current ꢁ 85 °C
Symbols and terms
Symbol English
German
C
Capacitance
Kapazität
CR
Rated capacitance
Nennkapazität
CS
Series capacitance
Serienkapazität
CS,T
Cf
Series capacitance at temperature T
Capacitance at frequency f
Case diameter, nominal dimension
Maximum case diameter
Self-inductance
Serienkapazität bei Temperatur T
Kapazität bei Frequenz f
Gehäusedurchmesser, Nennmaß
Maximaler Gehäusedurchmesser
Eigeninduktivität
d
dmax
ESL
ESR
ESRf
Equivalent series resistance
Equivalent series resistance at
frequency f
Ersatzserienwiderstand
Ersatzserienwiderstand bei Frequenz f
ESRT
Equivalent series resistance at
temperature T
Ersatzserienwiderstand bei Temperatur T
f
Frequency
Frequenz
Strom
I
Current
IAC
Alternating current (ripple current)
Wechselstrom
IAC,rms
Root-mean-square value of alternating
current
Wechselstrom, Effektivwert
IAC,f
Ripple current at frequency f
Maximum permissible ripple current
Rated ripple current
Wechselstrom bei Frequenz f
Maximal zulässiger Wechselstrom
Nennwechselstrom
IAC,max
IAC,R
IAC,R (B) Rated ripple current for base cooling
Nennwechselstromstrom für Bodenkühlung
Reststrom
Ileak
Ileak,op
l
Leakage current
Operating leakage current
Case length, nominal dimension
Maximum case length (without
terminals and mounting stud)
Resistance
Betriebsreststrom
Gehäuselänge, Nennmaß
Maximale Gehäuselänge (ohne Anschlüsse
und Gewindebolzen)
Widerstand
lmax
R
Rins
Rsymm
T
Insulation resistance
Balancing resistance
Temperature
Isolationswiderstand
Symmetrierwiderstand
Temperatur
∆T
TA
TC
TB
t
Temperature difference
Ambient temperature
Case temperature
Temperaturdifferenz
Umgebungstemperatur
Gehäusetemperatur
Capacitor base temperature
Time
Temperatur des Becherbodens
Zeit
∆t
Period
Zeitraum
tb
Service life (operating hours)
Brauchbarkeitsdauer (Betriebszeit)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 17 of 19
B43511, B43521
Outstanding ripple current ꢁ 85 °C
Symbol English
German
V
Voltage
Spannung
VF
Vop
VR
VS
XC
XL
Z
Forming voltage
Formierspannung
Operating voltage
Rated voltage, DC voltage
Surge voltage
Betriebsspannung
Nennspannung, Gleichspannung
Spitzenspannung
Capacitive reactance
Inductive reactance
Impedance
Kapazitiver Blindwiderstand
Induktiver Blindwiderstand
Scheinwiderstand
ZT
tan δ
λ
Impedance at temperature T
Dissipation factor
Scheinwiderstand bei Temperatur T
Verlustfaktor
Failure rate
Ausfallrate
ε0
Absolute permittivity
Relative permittivity
Angular velocity; 2 ꢀ π ꢀ f
Elektrische Feldkonstante
Dielektrizitätszahl
εr
ω
Kreisfrequenz; 2 ꢀ π ꢀ f
Note
All dimensions are given in mm.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 18 of 19
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical re-
quirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incum-
bent on the customer to check and decide whether an EPCOS product with the properties de-
scribed in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by
third parties in the event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Ma-
terial Data Sheets on the Internet (www.epcos.com/material). Should you have any more de-
tailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order. We also
reserve the right to discontinue production and delivery of products. Consequently, we
cannot guarantee that all products named in this publication will always be available. The
aforementioned does not apply in the case of individual agreements deviating from the fore-
going for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver-
sion of the "General Terms of Delivery for Products and Services in the Electrical In-
dustry" published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CSMP, CSSP, CTVS,
DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC,
MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL,
SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse,
WindCap are trademarks registered or pending in Europe and in other countries. Further
information will be found on the Internet at www.epcos.com/trademarks.
Page 19 of 19
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明