首页 |元器件品牌

B57560G1103H000 [EPCOS]

NTC thermistors for temperature measurement; NTC热敏电阻温度测量
B57560G1103H000
型号： B57560G1103H000
厂家： EPCOS    EPCOS
描述：

NTC thermistors for temperature measurement
NTC热敏电阻温度测量

电阻器 温度相关电阻器NTC 温度相关电阻器PTC 温度传感 PC
文件： 总18页 (文件大小：269K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
NTC thermistors for  
temperature measurement  
Glass-encapsulated sensors,  
standard type  
Series/Type:  
B57560G, B57560G1  
Date:  
February 2009  
© EPCOS AG 2009. Reproduction, publication and dissemination of this publication, enclosures hereto and the  
information contained therein without EPCOS' prior express consent is prohibited.  
Temperature measurement  
Glass-encapsulated sensors  
B57560G, B57560G1  
G560/G1560  
Applications  
Dimensional drawing  
Temperature measurement  
Features  
Glass-encapsulated, heat-resistive and  
highly stable  
For temperature measurement up to  
300 °C  
Leads: dumet wires (copper-clad FeNi)  
Options  
Leads: nickel-plated dumet wires  
Alternative dimensions available on request  
Delivery mode  
Bulk  
Dimensions in mm  
General technical data  
Climatic category  
Max. power  
(IEC 60068-1)  
(at 25 °C)  
55/300/56  
50  
∆RR/RR ±1, ±2, ±3  
P25  
mW  
%
°C  
mW/K  
s
mJ/K  
Resistance tolerance  
Rated temperature  
Dissipation factor  
Thermal cooling time constant  
Heat capacity  
TR  
δth  
τc  
25  
(in air)  
(in air)  
approx. 1.3  
approx. 15  
approx. 20  
Cth  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 2 of 18  
Temperature measurement  
Glass-encapsulated sensors  
B57560G, B57560G1  
G560/G1560  
Electrical specification and ordering codes  
R25  
Ω
No. of R/T  
characteristic K  
B25/85  
B0/100  
K
B25/100  
K
Ordering code  
2 k  
2 k  
5 k  
5 k  
10 k  
10 k  
10 k  
10 k  
20 k  
20 k  
30 k  
30 k  
50 k  
50 k  
100 k  
100 k  
1400 k  
1400 k  
8401  
8401  
8402  
8402  
7003  
7003  
8307  
8307  
8415  
8415  
7002  
7002  
8403  
8403  
8304  
8304  
8406  
8406  
3420  
3390 ±1%  
3390 ±1%  
3450 ±1%  
3450 ±1%  
3586  
3586  
3450  
3450  
3436  
3436  
3497  
3497  
3625 ±1%  
3625 ±1%  
3492 ±1%  
3492 ±1%  
4006  
B57560G0202+000  
B57560G0202+002  
B57560G0502+000  
B57560G0502+002  
B57560G1103+005  
B57560G1103+007  
B57560G1103+000  
B57560G1103+002  
B57560G0203+000  
B57560G0203+002  
B57560G1303+005  
B57560G1303+007  
B57560G0503+000  
B57560G0503+002  
B57560G1104+000  
B57560G1104+002  
B57560G0145+000  
B57560G0145+002  
3420  
3480  
3480  
3612  
3612  
3478  
3478  
3992  
3992  
3973  
3973  
3992  
3992  
4072  
4072  
4557  
4557  
3970 ±1%  
3970 ±1%  
3944  
4006  
3988 ±1%  
3988 ±1%  
4006  
3944  
3970 ±1%  
3970 ±1%  
4036  
4036  
5133 ±2%1)  
5133 ±2%1)  
4006  
4092 ±1%  
4092 ±1%  
4581  
4581  
+ = Resistance tolerance  
F = ±1%  
G = ±2%  
H = ±3%  
The last three digits of the ordering code denote:  
000 and 005 = dumet wires  
002 and 007 = nickel-plated wires  
1) B200/300  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 3 of 18  
Temperature measurement  
Glass-encapsulated sensors  
B57560G, B57560G1  
G560/G1560  
Reliability data  
Test  
Standard  
Test conditions  
∆R25/R25  
Remarks  
(typical)  
< 3%  
Storage in  
dry heat  
IEC  
60068-2-2  
Storage at upper  
category temperature  
T: 300 °C  
No visible  
damage  
t: 1000 h  
Storage in damp  
heat, steady state  
IEC  
Temperature of air: 85 °C  
< 2%  
No visible  
damage  
60068-2-67 Relative humidity of air: 85%  
Duration: 56 days  
Rapid temperature IEC  
Lower test temperature: ꢀ55 °C < 2%  
No visible  
damage  
cycling  
60068-2-14 Upper test temperature: 200 °C  
Number of cycles: 1000  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 4 of 18  
Temperature measurement  
Glass-encapsulated sensors  
B57560G, B57560G1  
G560/G1560  
R/T characteristics  
7002  
7003  
8304  
R/T No.  
T (°C)  
B25/100 = 3988 K  
RT/R25  
B25/100 = 3625 K  
B25/100 = 4092 K  
α (%/K) RT/R25  
α (%/K) RT/R25  
α (%/K)  
ꢀ55.0 96.33  
ꢀ50.0 66.866  
ꢀ45.0 47.037  
ꢀ40.0 33.508  
ꢀ35.0 24.156  
7.4  
7.2  
6.9  
6.7  
6.4  
63.225  
45.46  
33.07  
24.324  
18.081  
6.7  
6.5  
6.3  
6.0  
5.8  
100.11  
69.56  
48.945  
34.853  
25.102  
7.4  
7.2  
6.9  
6.7  
6.5  
ꢀ30.0 17.613  
ꢀ25.0 12.98  
6.2  
6.0  
5.8  
5.6  
5.4  
13.575  
10.29  
7.8716  
6.0739  
4.7258  
5.6  
5.4  
5.3  
5.1  
4.9  
18.275  
13.443  
9.9853  
7.4867  
5.6636  
6.2  
6.0  
5.9  
5.7  
5.5  
ꢀ20.0  
ꢀ15.0  
ꢀ10.0  
9.6643  
7.2656  
5.5129  
ꢀ5.0  
0.0  
5.0  
10.0  
15.0  
4.22  
5.3  
5.1  
4.9  
4.8  
4.6  
3.7062  
2.9287  
2.3311  
1.8684  
1.5075  
4.8  
4.6  
4.5  
4.4  
4.2  
4.3212  
3.324  
2.5769  
2.0127  
1.5834  
5.3  
5.2  
5.0  
4.9  
4.7  
3.2575  
2.5348  
1.9876  
1.5699  
20.0  
25.0  
30.0  
35.0  
40.0  
1.2488  
1.0000  
0.80594  
0.65355  
0.53312  
4.5  
4.4  
4.3  
4.1  
4.0  
1.224  
4.1  
4.0  
3.9  
3.8  
3.7  
1.2542  
1.0000  
0.80239  
0.64776  
0.52598  
4.6  
4.5  
4.3  
4.2  
4.1  
1.0000  
0.82176  
0.67909  
0.56422  
45.0  
50.0  
55.0  
60.0  
65.0  
0.43735  
0.36074  
0.29911  
0.24925  
0.20872  
3.9  
3.8  
3.7  
3.6  
3.5  
0.47122  
0.3955  
0.33355  
0.2826  
3.6  
3.5  
3.4  
3.3  
3.2  
0.4295  
0.35262  
0.291  
0.24136  
0.20114  
4.0  
3.9  
3.8  
3.7  
3.6  
0.24049  
70.0  
75.0  
80.0  
85.0  
90.0  
0.17558  
0.14837  
0.12592  
0.10731  
0.091816  
3.4  
3.3  
3.2  
3.2  
3.1  
0.20553  
0.17637  
0.15195  
0.13141  
0.11406  
3.1  
3.0  
2.9  
2.9  
2.8  
0.16841  
0.14164  
0.11963  
0.10147  
0.086407  
3.5  
3.4  
3.3  
3.3  
3.2  
95.0  
100.0  
105.0  
110.0  
115.0  
0.078862  
0.067988  
0.058824  
0.051071  
0.044489  
3.0  
2.9  
2.9  
2.8  
2.7  
0.099352  
0.086837  
0.076149  
0.066989  
0.059112  
2.7  
2.7  
2.6  
2.5  
2.5  
0.073867  
0.063383  
0.054584  
0.04717  
3.1  
3.0  
3.0  
2.9  
2.8  
0.040901  
120.0  
125.0  
130.0  
135.0  
140.0  
0.03888  
0.034084  
0.02997  
0.02643  
0.023373  
2.7  
2.6  
2.5  
2.5  
2.4  
0.052316  
0.046433  
0.041327  
0.03688  
2.4  
2.4  
2.3  
2.3  
2.2  
0.035581  
0.03105  
0.027179  
0.023861  
0.021008  
2.8  
2.7  
2.6  
2.6  
2.5  
0.032998  
145.0  
150.0  
155.0  
0.020727  
0.018429  
0.016427  
2.4  
2.3  
2.3  
0.029598  
0.026612  
0.023984  
2.2  
2.1  
2.1  
0.018548  
0.016419  
0.014573  
2.5  
2.4  
2.4  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 5 of 18  
Temperature measurement  
Glass-encapsulated sensors  
B57560G, B57560G1  
G560/G1560  
7002  
7003  
8304  
R/T No.  
T (°C)  
B25/100 = 3988 K  
RT/R25  
B25/100 = 3625 K  
B25/100 = 4092 K  
α (%/K) RT/R25  
α (%/K) RT/R25  
α (%/K)  
160.0  
165.0  
0.014679  
0.013149  
2.2  
2.2  
0.021665  
0.019613  
2.0  
2.0  
0.012967  
0.011566  
2.3  
2.3  
170.0  
175.0  
180.0  
185.0  
190.0  
0.011806  
0.010623  
0.0095804  
0.0086582  
0.0078408  
2.1  
2.1  
2.0  
2.0  
2.0  
0.017793  
0.016176  
0.014735  
0.013448  
0.012297  
1.9  
1.9  
1.8  
1.8  
1.8  
0.010341  
2.2  
0.0092664 2.2  
0.0083224 2.1  
0.0074907 2.1  
0.0067564 2.0  
195.0  
200.0  
205.0  
210.0  
215.0  
0.0071148  
0.0064685  
0.005892  
0.0053767  
0.0049152  
1.9  
1.9  
1.8  
1.8  
1.8  
0.011265  
0.010338  
0.009504  
0.0087516  
0.0080718  
1.7  
1.7  
1.7  
1.6  
1.6  
0.0061064 2.0  
0.0055299 2.0  
0.0050175 1.9  
0.0045611 1.9  
0.0041537 1.9  
220.0  
225.0  
230.0  
235.0  
240.0  
0.0045011  
0.0041287  
0.0037934  
0.0034908  
0.0032173  
1.7  
1.7  
1.7  
1.6  
1.6  
0.0074567  
0.0068989  
0.0063925  
0.0059318  
0.005512  
1.6  
1.5  
1.5  
1.5  
1.5  
0.0037895 1.8  
0.0034631 1.8  
0.0031701 1.8  
0.0029067 1.7  
0.0026693 1.7  
245.0  
250.0  
255.0  
260.0  
265.0  
0.0029697  
0.0027451  
0.0025412  
0.0023556  
0.0021865  
1.6  
1.6  
1.5  
1.5  
1.5  
0.005129  
0.004779  
0.0044586  
0.004165  
0.0038955  
1.4  
1.4  
1.4  
1.4  
1.3  
0.0024551 1.7  
0.0022615 1.6  
0.0020862 1.6  
0.0019273 1.6  
0.0017829 1.5  
270.0  
275.0  
280.0  
285.0  
290.0  
0.0020323  
0.0018913  
0.0017623  
0.0016441  
0.0015357  
1.5  
1.4  
1.4  
1.4  
1.4  
0.0036478  
0.0034199  
0.0032098  
0.003016  
0.002837  
1.3  
1.3  
1.3  
1.2  
1.2  
0.0016516 1.5  
0.0015319 1.5  
0.0014228 1.5  
0.0013231 1.4  
0.0012319 1.4  
295.0  
300.0  
0.001436  
0.0013444  
1.3  
1.3  
0.0026714  
0.002518  
1.2  
1.2  
0.0011483 1.4  
0.0010716 1.4  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 6 of 18  
Temperature measurement  
Glass-encapsulated sensors  
B57560G, B57560G1  
G560/G1560  
R/T characteristics  
8307  
8401  
8402  
R/T No.  
T (°C)  
B25/100 = 3492 K  
RT/R25  
B0/100 = 3390 K  
B0/100 = 3450 K  
α (%/K) RT/R25  
α (%/K) RT/R25  
α (%/K)  
ꢀ55.0 52.624  
ꢀ50.0 38.452  
ꢀ45.0 28.401  
ꢀ40.0 21.194  
ꢀ35.0 15.972  
6.4  
6.2  
6.0  
5.8  
5.6  
48.237  
35.488  
26.39  
19.825  
15.037  
6.2  
6.0  
5.8  
5.6  
5.4  
51.991  
37.989  
28.07  
20.96  
15.809  
6.4  
6.2  
5.9  
5.7  
5.5  
ꢀ30.0 12.149  
5.4  
5.2  
5.0  
4.9  
4.7  
11.511  
8.8893  
6.9218  
5.4326  
4.2961  
5.3  
5.1  
4.9  
4.8  
4.6  
12.037  
9.2484  
7.1668  
5.5993  
4.4087  
5.4  
5.2  
5.0  
4.9  
4.7  
ꢀ25.0  
ꢀ20.0  
ꢀ15.0  
ꢀ10.0  
9.3246  
7.2181  
5.6332  
4.4308  
ꢀ5.0  
0.0  
5.0  
10.0  
15.0  
3.5112  
2.8024  
2.252  
1.8216  
1.4827  
4.6  
4.4  
4.3  
4.2  
4.1  
3.422  
4.5  
4.3  
4.2  
4.1  
4.0  
3.4971  
2.7936  
2.2468  
1.8187  
1.4813  
4.6  
4.4  
4.3  
4.2  
4.0  
2.7445  
2.2158  
1.8002  
1.4714  
20.0  
25.0  
30.0  
35.0  
40.0  
1.2142  
1.0000  
0.82818  
0.68954  
0.57703  
3.9  
3.8  
3.7  
3.6  
3.5  
1.2097  
1.0000  
0.8311  
0.69427  
0.58282  
3.9  
3.8  
3.6  
3.5  
3.5  
1.2136  
1.0000  
0.82845  
0.68991  
0.57742  
3.9  
3.8  
3.7  
3.6  
3.5  
45.0  
50.0  
55.0  
60.0  
65.0  
0.48525  
0.41  
0.34798  
0.29663  
0.25392  
3.4  
3.3  
3.2  
3.2  
3.1  
0.49158  
0.41652  
0.35446  
0.30292  
0.25994  
3.4  
3.3  
3.2  
3.1  
3.0  
0.4856  
3.4  
3.3  
3.2  
3.2  
3.1  
0.41026  
0.34816  
0.29673  
0.25393  
70.0  
75.0  
80.0  
85.0  
90.0  
0.21824  
0.1883  
0.16307  
0.14174  
0.12362  
3.0  
2.9  
2.8  
2.8  
2.7  
0.22392  
0.19363  
0.16805  
0.14636  
0.1279  
2.9  
2.9  
2.8  
2.7  
2.7  
0.21817  
0.18816  
0.16288  
0.1415  
3.0  
2.9  
2.8  
2.8  
2.7  
0.12335  
95.0  
100.0  
105.0  
110.0  
115.0  
0.10818  
0.094973  
0.08364  
0.073881  
0.06545  
2.6  
2.6  
2.5  
2.5  
2.4  
0.11214  
0.098635  
0.087023  
0.077007  
0.06834  
2.6  
2.5  
2.5  
2.4  
2.4  
0.10788  
2.6  
2.6  
2.5  
2.5  
2.4  
0.094659  
0.083313  
0.073547  
0.065114  
120.0  
125.0  
130.0  
135.0  
140.0  
0.058144  
0.051794  
0.046259  
0.04142  
2.3  
2.3  
2.2  
2.2  
2.1  
0.060818  
0.05427  
0.048554  
0.043551  
0.039159  
2.3  
2.3  
2.2  
2.2  
2.1  
0.05781  
2.4  
2.3  
2.2  
2.2  
2.1  
0.051464  
0.045936  
0.041106  
0.036875  
0.037179  
145.0  
150.0  
155.0  
0.033451  
0.030166  
0.027264  
2.1  
2.0  
2.0  
0.035294  
0.031885  
0.02887  
2.1  
2.0  
2.0  
0.033159  
0.029886  
0.026998  
2.1  
2.1  
2.0  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 7 of 18  
Temperature measurement  
Glass-encapsulated sensors  
B57560G, B57560G1  
G560/G1560  
8307  
8401  
8402  
R/T No.  
T (°C)  
B25/100 = 3492 K  
RT/R25  
B0/100 = 3390 K  
B0/100 = 3450 K  
α (%/K) RT/R25  
α (%/K) RT/R25  
α (%/K)  
160.0  
165.0  
0.024694  
0.022414  
2.0  
1.9  
0.026197  
0.023822  
1.9  
1.9  
0.024442  
0.022175  
2.0  
1.9  
170.0  
175.0  
180.0  
185.0  
190.0  
0.020385  
0.018577  
0.016961  
0.015514  
0.014216  
1.9  
1.8  
1.8  
1.8  
1.7  
0.021707  
0.01982  
0.018132  
0.016619  
0.01526  
1.8  
1.8  
1.8  
1.7  
1.7  
0.02016  
1.9  
1.8  
1.8  
1.8  
1.7  
0.018365  
0.016762  
0.015328  
0.014043  
195.0  
200.0  
205.0  
210.0  
215.0  
0.013049  
0.011999  
0.011051  
0.010194  
0.0094181  
1.7  
1.7  
1.6  
1.6  
1.6  
0.014038  
0.012936  
0.011941  
0.011041  
0.010225  
1.7  
1.6  
1.6  
1.6  
1.5  
0.012888  
0.011849  
0.010913  
0.010067  
0.0093013  
1.7  
1.7  
1.6  
1.6  
1.6  
220.0  
225.0  
230.0  
235.0  
240.0  
0.0087144  
0.0080751  
0.0074933  
0.0069631  
0.0064791  
1.5  
1.5  
1.5  
1.5  
1.4  
0.0094848  
0.0088113  
0.0081978  
0.0076382  
0.0071268  
1.5  
1.5  
1.4  
1.4  
1.4  
0.0086075  
0.0079777  
0.007405  
0.0068833  
0.0064075  
1.5  
1.5  
1.5  
1.4  
1.4  
245.0  
250.0  
255.0  
260.0  
265.0  
0.0060366  
0.0056316  
0.0052602  
0.0049193  
0.0046059  
1.4  
1.4  
1.4  
1.3  
1.3  
0.006659  
1.3  
1.3  
1.3  
1.3  
1.2  
0.0059728  
0.0055751  
0.0052107  
0.0048764  
0.0045692  
1.4  
1.4  
1.3  
1.3  
1.3  
0.0062302  
0.0058368  
0.0054753  
0.0051426  
270.0  
275.0  
280.0  
285.0  
290.0  
0.0043173  
0.0040514  
0.003806  
0.0035793  
0.0033696  
1.3  
1.3  
1.2  
1.2  
1.2  
0.004836  
0.0045532  
0.004292  
0.0040504  
0.0038266  
1.2  
1.2  
1.2  
1.1  
1.1  
0.0042866  
0.0040263  
0.0037862  
0.0035645  
0.0033595  
1.3  
1.2  
1.2  
1.2  
1.2  
295.0  
300.0  
0.0031753  
0.0029952  
1.2  
1.2  
0.0036192  
0.0034267  
1.1  
1.1  
0.0031697  
0.0029938  
1.2  
1.1  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 8 of 18  
Temperature measurement  
Glass-encapsulated sensors  
B57560G, B57560G1  
G560/G1560  
R/T characteristics  
8403  
8406  
8415  
R/T No.  
T (°C)  
B0/100 = 3970 K  
RT/R25  
B200/300 = 5133 K  
B0/100 = 3970 K  
α (%/K) RT/R25  
α (%/K) RT/R25  
α (%/K)  
ꢀ55.0 103.29  
7.6  
7.3  
7.1  
6.8  
6.5  
183.3  
8.5  
8.2  
7.9  
7.6  
7.3  
103.29  
71.079  
49.619  
35.108  
25.158  
7.6  
7.3  
7.1  
6.8  
6.5  
ꢀ50.0  
ꢀ45.0  
ꢀ40.0  
ꢀ35.0  
71.079  
49.619  
35.108  
25.158  
120.69  
80.721  
54.792  
37.713  
ꢀ30.0  
ꢀ25.0  
ꢀ20.0  
ꢀ15.0  
ꢀ10.0  
18.245  
13.383  
9.9221  
7.4316  
5.6202  
6.3  
6.1  
5.9  
5.7  
5.5  
26.301  
18.571  
13.269  
9.5865  
6.9997  
7.1  
6.8  
6.6  
6.4  
6.2  
18.245  
13.383  
9.9221  
7.4316  
5.6202  
6.3  
6.1  
5.9  
5.7  
5.5  
ꢀ5.0  
0.0  
5.0  
10.0  
15.0  
4.2894  
3.3024  
2.5607  
2.0017  
1.5768  
5.3  
5.2  
5.0  
4.8  
4.7  
5.1625  
3.844  
2.8884  
2.1892  
1.673  
6.0  
5.8  
5.6  
5.5  
5.3  
4.2894  
3.3024  
2.5607  
2.0017  
1.5768  
5.3  
5.2  
5.0  
4.8  
4.7  
20.0  
25.0  
30.0  
35.0  
40.0  
1.2513  
1.0000  
0.80451  
0.65139  
0.53064  
4.6  
4.4  
4.3  
4.2  
4.0  
1.2886  
1.0000  
0.78164  
0.61516  
0.48734  
5.1  
5.0  
4.9  
4.7  
4.6  
1.2513  
1.0000  
0.80451  
0.65139  
0.53064  
4.6  
4.4  
4.3  
4.2  
4.0  
45.0  
50.0  
55.0  
60.0  
65.0  
0.43481  
0.35828  
0.29681  
0.24715  
0.20682  
3.9  
3.8  
3.7  
3.6  
3.5  
0.38851  
0.3116  
0.25136  
0.2039  
4.5  
4.4  
4.2  
4.1  
4.0  
0.43481  
0.35828  
0.29681  
0.24715  
0.20682  
3.9  
3.8  
3.7  
3.6  
3.5  
0.16629  
70.0  
75.0  
80.0  
85.0  
90.0  
0.17389  
0.14687  
0.12459  
0.10614  
0.09078  
3.4  
3.3  
3.2  
3.2  
3.1  
0.1363  
3.9  
3.8  
3.7  
3.6  
3.6  
0.17389  
0.14687  
0.12459  
0.10614  
0.09078  
3.4  
3.3  
3.2  
3.2  
3.1  
0.11228  
0.092932  
0.077268  
0.064527  
95.0  
100.0  
105.0  
110.0  
115.0  
0.077949  
0.067183  
0.058113  
0.050443  
0.043932  
3.0  
2.9  
2.9  
2.8  
2.7  
0.054116  
0.045571  
0.038526  
0.032694  
0.027847  
3.5  
3.4  
3.3  
3.2  
3.2  
0.077949  
0.067183  
0.058113  
0.050443  
0.043932  
3.0  
2.9  
2.9  
2.8  
2.7  
120.0  
125.0  
130.0  
135.0  
140.0  
0.038386  
0.033645  
0.029579  
0.02608  
0.02306  
2.7  
2.6  
2.5  
2.5  
2.4  
0.023803  
0.020416  
0.017569  
0.015167  
0.013135  
3.1  
3.0  
3.0  
2.9  
2.8  
0.038386  
0.033645  
0.029579  
0.02608  
0.02306  
2.7  
2.6  
2.5  
2.5  
2.4  
145.0  
150.0  
155.0  
0.020446  
0.018176  
0.016199  
2.4  
2.3  
2.3  
0.011409  
0.0099385 2.7  
0.0086821 2.7  
2.8  
0.020446  
0.018176  
0.016199  
2.4  
2.3  
2.3  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 9 of 18  
Temperature measurement  
Glass-encapsulated sensors  
B57560G, B57560G1  
G560/G1560  
8403  
8406  
8415  
R/T No.  
T (°C)  
B0/100 = 3970 K  
RT/R25  
B200/300 = 5133 K  
B0/100 = 3970 K  
α (%/K) RT/R25  
α (%/K) RT/R25  
α (%/K)  
160.0  
165.0  
0.014473  
0.012962  
2.2  
2.2  
0.0076052 2.6  
0.0066796 2.6  
0.014473  
0.012962  
2.2  
2.2  
170.0  
175.0  
180.0  
185.0  
190.0  
0.011636  
0.010469  
0.0094395 2.0  
0.0085294 2.0  
0.0077229 2.0  
2.1  
2.1  
0.0058817 2.5  
0.011636  
0.010469  
0.0094395 2.0  
0.0085294 2.0  
0.0077229 2.0  
2.1  
2.1  
0.005192  
2.5  
0.0045943 2.4  
0.0040749 2.4  
0.0036225 2.3  
195.0  
200.0  
205.0  
210.0  
215.0  
0.0070067 1.9  
0.0063691 1.9  
0.0058005 1.9  
0.0052924 1.8  
0.0048373 1.8  
0.0032274 2.3  
0.0028817 2.2  
0.0025783 2.2  
0.0023116 2.2  
0.0020766 2.1  
0.0070067 1.9  
0.0063691 1.9  
0.0058005 1.9  
0.0052924 1.8  
0.0048373 1.8  
220.0  
225.0  
230.0  
235.0  
240.0  
0.004429  
0.004062  
0.0037315 1.7  
0.0034333 1.6  
0.0031639 1.6  
1.7  
1.7  
0.0018691 2.1  
0.0016854 2.0  
0.0015226 2.0  
0.004429  
0.004062  
0.0037315 1.7  
0.0034333 1.6  
0.0031639 1.6  
1.7  
1.7  
0.001378  
2.0  
0.0012492 1.9  
245.0  
250.0  
255.0  
260.0  
265.0  
0.00292  
0.0026988 1.6  
0.002498 1.5  
0.0023153 1.5  
0.0021489 1.5  
1.6  
0.0011344 1.9  
0.0010318 1.9  
0.00094005 1.8  
0.00085777 1.8  
0.00078388 1.8  
0.00292  
0.0026988 1.6  
0.002498 1.5  
0.0023153 1.5  
0.0021489 1.5  
1.6  
270.0  
275.0  
280.0  
285.0  
290.0  
0.0019971 1.5  
0.0018584 1.4  
0.0017316 1.4  
0.0016153 1.4  
0.0015087 1.4  
0.00071742 1.8  
0.00065754 1.7  
0.00060352 1.7  
0.0005547 1.7  
0.00051051 1.6  
0.0019971 1.5  
0.0018584 1.4  
0.0017316 1.4  
0.0016153 1.4  
0.0015087 1.4  
295.0  
300.0  
0.0014107 1.3  
0.0013207 1.3  
0.00047047 1.6  
0.00043412 1.6  
0.0014107 1.3  
0.0013207 1.3  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 10 of 18  
Temperature measurement  
Glass-encapsulated sensors  
B57560G, B57560G1  
G560/G1560  
Mounting instructions  
1
Soldering  
1.1  
Leaded NTC thermistors  
Leaded thermistors comply with the solderability requirements specified by CECC.  
When soldering, care must be taken that the NTC thermistors are not damaged by excessive  
heat. The following maximum temperatures, maximum time spans and minimum distances have  
to be observed:  
Dip soldering  
max. 260 °C  
max. 4 s  
Iron soldering  
max. 360 °C  
max. 2 s  
Bath temperature  
Soldering time  
Distance from thermistor  
min. 6 mm  
min. 6 mm  
Under more severe soldering conditions the resistance may change.  
1.2 Leadless NTC thermistors  
In case of NTC thermistors without leads, soldering is restricted to devices which are provided  
with a solderable metallization. The temperature shock caused by the application of hot solder  
may produce fine cracks in the ceramic, resulting in changes in resistance.  
To prevent leaching of the metallization, solder with silver additives or with a low tin content  
should be used. In addition, soldering methods should be employed which permit short soldering  
times.  
2
Clamp contacting  
Pressure contacting by means of clamps is particularly suitable for applications involving frequent  
switching and high turn-on powers.  
3
Robustness of terminations (leaded types)  
The leads meet the requirements of IEC 60068-2-21. They may not be bent closer than 4 mm  
from the solder joint on the thermistor body or from the point at which they leave the feed-  
throughs. During bending, any mechanical stress at the outlet of the leads must be removed. The  
bending radius should be at least 0.75 mm.  
Tensile strength: Test Ua1:  
Leads  
≤0.25 mm = 1.0 N  
≤0.35 mm = 2.5 N  
≤0.50 mm = 5.0 N  
≤0.80 mm = 10.0 N  
≤1.25 mm = 20.0 N  
0.25 <  
0.35 <  
0.50 <  
0.80 <  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 11 of 18  
Temperature measurement  
Glass-encapsulated sensors  
B57560G, B57560G1  
G560/G1560  
Bending strength: Test Ub:  
Two 90°-bends in opposite directions at a weight of 0.25 kg.  
Torsional strength: Test Uc: severity 2  
The lead is bent by 90° at a distance of 6 to 6.5 mm from the thermistor body.  
The bending radius of the leads should be approx. 0.75 mm. Two torsions of  
180° each (severity 2).  
When subjecting leads to mechanical stress, the following should be observed:  
Tensile stress on leads  
During mounting and operation tensile forces on the leads are to be avoided.  
Bending of leads  
Bending of the leads directly on the thermistor body is not permissible.  
A lead may be bent at a minimum distance of twice the wire's diameter +2 mm from the solder  
joint on the thermistor body. During bending the wire must be mechanically relieved at its outlet.  
The bending radius should be at least 0.75 mm.  
Twisting of leads  
The twisting (torsion) by 180° of a lead bent by 90° is permissible at 6 mm from the bottom of the  
thermistor body.  
4
Sealing and potting  
When thermistors are sealed, potted or overmolded, there must be no mechanical stress caused  
by thermal expansion during the production process (curing / overmolding process) and during  
later operation. The upper category temperature of the thermistor must not be exceeded. Ensure  
that the materials used (sealing / potting compound and plastic material) are chemically neutral.  
5
Cleaning  
If cleaning is necessary, mild cleaning agents such as ethyl alcohol and cleaning gasoline are  
recommended. Cleaning agents based on water are not allowed. Ultrasonic cleaning methods are  
permissible.  
6
Storage  
In order to maintain their solderability, thermistors must be stored in a non-corrosive atmosphere.  
Humidity, temperature and container materials are critical factors.  
Do not store SMDs where they are exposed to heat or direct sunlight. Otherwise, the packing ma-  
terial may be deformed or SMDs may stick together, causing problems during mounting. After  
opening the factory seals, such as polyvinyl-sealed packages, use the SMDs as soon as possible.  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 12 of 18  
Temperature measurement  
Glass-encapsulated sensors  
B57560G, B57560G1  
G560/G1560  
The components should be left in the original packing. Touching the metallization of unsoldered  
thermistors may change their soldering properties.  
Storage temperature:  
ꢀ25 °C up to 45 °C  
Relative humidity (without condensation):  
≤75% annual mean  
<95%, maximum 30 days per annum  
Solder the thermistors listed in this data book after shipment from EPCOS within the time speci-  
fied:  
SMDs:  
12 months  
24 months  
Leaded components:  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 13 of 18  
Temperature measurement  
Glass-encapsulated sensors  
B57560G, B57560G1  
G560/G1560  
Cautions and warnings General  
See "Important notes" at the end of this document.  
Storage  
Store thermistors only in original packaging. Do not open the package prior to storage.  
Storage conditions in original packaging: storage temperature ꢀ25 °C ... +45 °C, relative  
humidity ≤75% annual mean, <95% maximum 30 days per annum, dew precipitation is  
inadmissible.  
Do not store thermistors where they are exposed to heat or direct sunlight. Otherwise, the  
packing material may be deformed or components may stick together, causing problems during  
mounting.  
Avoid contamination of thermistor surface during storage, handling and processing.  
Avoid storage of thermistors in harmful environments like corrosive gases (SOx, Cl etc).  
Use the components as soon as possible after opening the factory seals, i.e. the  
polyvinyl-sealed packages.  
Solder thermistors within the time specified after shipment from EPCOS.  
For leaded components this is 24 months, for SMDs 12 months.  
Handling  
NTC thermistors must not be dropped. Chip-offs or any other damage must not be caused  
during handling of NTCs.  
Do not touch components with bare hands. Gloves are recommended.  
Avoid contamination of thermistor surface during handling.  
Bending / twisting leads  
A lead (wire) may be bent at a minimum distance of twice the wire’s diameter plus 4 mm from  
the component head or housing. When bending ensure the wire is mechanically relieved at the  
component head or housing. The bending radius should be at least 0.75 mm.  
Twisting (torsion) by 180° of a lead bent by 90° is permissible at 6 mm from the bottom of the  
thermistor body.  
Soldering  
Use resin-type flux or non-activated flux.  
Insufficient preheating may cause ceramic cracks.  
Rapid cooling by dipping in solvent is not recommended.  
Complete removal of flux is recommended.  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 14 of 18  
Temperature measurement  
Glass-encapsulated sensors  
B57560G, B57560G1  
G560/G1560  
Mounting  
Ensure that no thermo-mechanical stress occurs due to production processes (curing or  
overmolding processes) when thermistors are sealed, potted or overmolded or during their  
subsequent operation. The maximum temperature of the thermistor must not be exceeded.  
Ensure that the materials used (sealing/potting compound and plastic material) are chemically  
neutral.  
Electrodes/contacts must not be scratched or damaged before/during/after the mounting  
process.  
Contacts and housing used for assembly with the thermistor must be clean before mounting.  
Ensure that adjacent materials are designed for operation at temperatures comparable to the  
surface temperature of the thermistor. Be sure that surrounding parts and materials can  
withstand the temperature.  
Avoid contamination of the thermistor surface during processing.  
The connections of sensors (e.g. cable end, wire end, plug terminal) may only be exposed to  
an environment with normal atmospheric conditions.  
Tensile forces on cables or leads must be avoided during mounting and operation.  
Bending or twisting of cables or leads directly on the thermistor body is not permissible.  
Avoid using chemical substances as mounting aids. It must be ensured that no water or other  
liquids enter the NTC thermistors (e.g. through plug terminals). In particular, water based  
substances (e.g. soap suds) must not be used as mounting aids for sensors.  
Operation  
Use thermistors only within the specified operating temperature range.  
Use thermistors only within the specified power range.  
Environmental conditions must not harm the thermistors. Only use the thermistors under  
normal atmospheric conditions or within the specified conditions.  
Contact of NTC thermistors with any liquids and solvents should be prevented. It must be  
ensured that no water enters the NTC thermistors (e.g. through plug terminals). For  
measurement purposes (checking the specified resistance vs. temperature), the component  
must not be immersed in water but in suitable liquids (e.g. Galden).  
Avoid dewing and condensation unless thermistor is specified for these conditions.  
Bending or twisting of cables and/or wires is not permissible during operation of the sensor in  
the application.  
Be sure to provide an appropriate fail-safe function to prevent secondary product damage  
caused by malfunction.  
This listing does not claim to be complete, but merely reflects the experience of EPCOS AG.  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 15 of 18  
Temperature measurement  
Glass-encapsulated sensors  
B57560G, B57560G1  
G560/G1560  
Symbols and terms  
Symbol  
English  
German  
Fläche  
A
Area  
AWG  
American Wire Gauge  
Amerikanische Norm für Drahtquerschnitte  
B
B value  
B-Wert  
B25/100  
B value determined by resistance  
measurement at 25 °C and 100 °C  
B-Wert, ermittelt durch Widerstands-  
messungen bei 25 °C und 100 °C  
Cth  
I
Heat capacitance  
Current  
Wärmekapazität  
Strom  
N
Number (integer)  
Anzahl (ganzzahliger Wert)  
P25  
Pdiss  
Pel  
Maximum power at 25 °C  
Power dissipation  
Electrical power  
Maximale Leistung bei 25 °C  
Verlustleistung  
Elektrische Leistung  
Pmax  
Maximum power within stated  
temperature range  
Maximale Leistung im  
angegebenenTemperaturbereich  
∆RB/RB  
Resistance tolerance caused by  
spread of B value  
Insulation resistance  
Parallel resistance  
Widerstandstoleranz, die durch die  
Streuung des B-Wertes verursacht wird  
Isolationswiderstand  
Rins  
RP  
Parallelwiderstand  
RR  
Rated resistance  
Nennwiderstand  
∆RR/RR  
RS  
Resistance tolerance  
Series resistance  
Widerstandstoleranz  
Serienwiderstand  
RT  
Resistance at temperature T  
(e.g. R25 = resistance at 25 °C)  
Widerstand bei Temperatur T  
(z.B. R25 = Widerstand bei 25 °C)  
T
Temperature  
Temperatur  
∆T  
t
Temperature tolerance  
Time  
Temperaturtoleranz  
Zeit  
TA  
Tmax  
Ambient temperature  
Upper category temperature  
Umgebungstemperatur  
Obere Grenztemperatur  
(Kategorietemperatur)  
Untere Grenztemperatur  
(Kategorietemperatur)  
Tmin  
Lower category temperature  
Top  
TR  
Tsurf  
Operating temperature  
Rated temperature  
Surface temperature  
Betriebstemperatur  
Nenntemperatur  
Oberflächentemperatur  
V
Voltage  
Spannung  
Vins  
Vop  
Vtest  
Insulation test voltage  
Operating voltage  
Test voltage  
Isolationsprüfspannung  
Betriebsspannung  
Prüfspannung  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 16 of 18  
Temperature measurement  
Glass-encapsulated sensors  
B57560G, B57560G1  
G560/G1560  
Symbol  
English  
German  
α
Temperature coefficient  
Tolerance, change  
Dissipation factor  
Temperaturkoeffizient  
Toleranz, Änderung  
Wärmeleitwert  
∆
δth  
τc  
τa  
Thermal cooling time constant  
Thermal time constant  
Thermische Abkühlzeitkonstante  
Thermische Zeitkonstante  
Abbreviations / Notes  
Symbol  
English  
German  
Surface-mounted devices  
Oberflächenmontierbares Bauelement  
*
To be replaced by a number in ordering Platzhalter für Zahl im Bestellnummern-  
codes, type designations etc.  
code oder für die Typenbezeichnung.  
Platzhalter für einen Buchstaben.  
Alle Maße sind in mm angegeben.  
+
To be replaced by a letter.  
All dimensions are given in mm.  
The commas used in numerical values Verwendete Kommas in Zahlenwerten  
denote decimal points. bezeichnen Dezimalpunkte.  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 17 of 18  
Important notes  
The following applies to all products named in this publication:  
1. Some parts of this publication contain statements about the suitability of our products for  
certain areas of application. These statements are based on our knowledge of typical re-  
quirements that are often placed on our products in the areas of application concerned. We  
nevertheless expressly point out that such statements cannot be regarded as binding  
statements about the suitability of our products for a particular customer application.  
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar  
with them than the customers themselves. For these reasons, it is always ultimately incum-  
bent on the customer to check and decide whether an EPCOS product with the properties de-  
scribed in the product specification is suitable for use in a particular customer application.  
2. We also point out that in individual cases, a malfunction of electronic components or  
failure before the end of their usual service life cannot be completely ruled out in the  
current state of the art, even if they are operated as specified. In customer applications  
requiring a very high level of operational safety and especially in customer applications in  
which the malfunction or failure of an electronic component could endanger human life or  
health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by  
means of suitable design of the customer application or other action taken by the customer  
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by  
third parties in the event of malfunction or failure of an electronic component.  
3. The warnings, cautions and product-specific notes must be observed.  
4. In order to satisfy certain technical requirements, some of the products described in this  
publication may contain substances subject to restrictions in certain jurisdictions (e.g.  
because they are classed as hazardous). Useful information on this will be found in our Ma-  
terial Data Sheets on the Internet (www.epcos.com/material). Should you have any more de-  
tailed questions, please contact our sales offices.  
5. We constantly strive to improve our products. Consequently, the products described in this  
publication may change from time to time. The same is true of the corresponding product  
specifications. Please check therefore to what extent product descriptions and specifications  
contained in this publication are still applicable before or when you place an order. We also  
reserve the right to discontinue production and delivery of products. Consequently, we  
cannot guarantee that all products named in this publication will always be available. The  
aforementioned does not apply in the case of individual agreements deviating from the fore-  
going for customer-specific products.  
6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver-  
sion of the "General Terms of Delivery for Products and Services in the Electrical In-  
dustry" published by the German Electrical and Electronics Industry Association  
(ZVEI).  
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DSSP,  
MiniBlue, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, SIFERRIT,  
SIFI, SIKOREL, SilverCap, SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse,  
WindCap are trademarks registered or pending in Europe and in other countries. Further  
information will be found on the Internet at www.epcos.com/trademarks.  
Page 18 of 18  

相关型号：

SI9130DB

 5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

 Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

 500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明