B65814-B2005 [EPCOS]

RM 10 RM cores are supplied in sets; RM 10 RM磁芯成套供应


型号：	B65814-B2005
厂家：	EPCOS
描述：	RM 10 RM cores are supplied in sets RM 10 RM磁芯成套供应
文件：	总8页 (文件大小：201K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

RM Cores

Series/Type:

RM 10

The following products presented in this data sheet are being withdrawn.

Ordering Code

Substitute Product

Date of

Withdrawal

Deadline Last

Orders

Last Shipments

B65814N1011D001 B65814N1012D001 2003-08-08

B65814N1010D001 B65814K1010D001 2003-08-08

2004-02-29

2004-08-31

For further information please contact your nearest EPCOS sales office, which will also support

you in selecting a suitable substitute. The addresses of our worldwide sales network are

presented at www.epcos.com/sales.

RM 10

Core

B65813

ꢀ In accordance with IEC 60431

ꢀ Cores without center hole

for transformer applications

ꢀ RM cores are supplied in sets

Magnetic characteristics (per set)

with

without

center hole center hole

–1

Σl/A

0,5

—

3 470

0,45

4 310

min

Approx. weight (per set)

20,7

Gapped

Material

A value

Ordering code

-D with center hole

approx.

-N with threaded sleeve

-J without center hole

N48

N41

400

630

3 %

0,21

0,13

160

250

B65813-+400-A48

B65813-+630-A48

250

630

1600 10 %

3 %

5 %

0,44

0,13

0,04

226

573

B65813-J250-A41

B65813-J630-J41

B65813-J1600-K41

1) Replace the + by the code letter “D” or “N” for the required version.

236 08/01

RM 10

Core

B65813

Ungapped

Material A value

Ordering code

L1min

W/set

-J w/o center hole

B65813-J-R30

B65813-J-Y38

B65813-J-R49

N30

T38

N49

7600 + 30/– 20 % 2720

16000 + 40/– 30 % 5730

2900 + 30/– 20 % 1040 1680 < 0,75

(50 mT, 500 kHz,100 °C)

4200 + 30/– 20 % 1500 2550 < 2,30

(200 mT, 100 kHz, 100 °C)

4200 + 30/– 20 % 1500 2550 < 2,00

(200 mT, 100 kHz, 100 °C)

5500 + 30/– 20 % 1960 2550 < 0,80

(200 mT, 25 kHz, 100 °C)

N87

N97

N41

B65813-J-R87

B65813-J-R97

B65813-J-R41

1) Preliminary data

237 08/01

RM 10

Accessories

B65814

Coil former

Material:

GFR thermosetting plastic (UL 94 V-0, insulation class to IEC 60085:

max. operating temperature 180 °C), color code black

Solderability: to IEC 60068-2-20, test Ta, method 1 (aging 3): 235 °C, 2 s

Resistance to soldering heat: to IEC 60068-2-20, test Tb, method 1B: 350 °C, 3,5 s

Winding:

see “Processing Notes”, page 153

Squared pins. For matching clamp and insulating washers see page 240.

Sections

A value

µΩ

Pins

Ordering code

41,5

B65814-N1008-D1

B65814-N1010-D1

B65814-N1011-D1

B65814-N1012-D1

B65814-N1008-D2

12 pins

Version

Pins omitted

11,1+0,2

8 pins

10 pins

11 pins

2, 5, 8, 11

2, 11

ø21^_0,2

ø12,5^_0,2

0,5

Hole arrangement

View in

mounting direction

ø1+0,1

Erdungspunkte ø1,3+0,1

Ground Ø 1,3+0,1

FRM0271-W

238 08/01

RM 10

Accessories

B65814

Coil former for power applications

Optimized for automatic winding

Material:

GFR polyterephthalate (UL 94 V-0, insulation class to IEC 60085:

max. operating temperature 155 °C), color code black

Solderability: to IEC 60068-2-20, test Ta, method 1 (aging 3): 235 °C, 2 s

Resistance to soldering heat: to IEC 60068-2-20, test Tb, method 1B: 350 °C, 3,5 s

Winding:

see “Processing Notes”, page 153

For matching clamp and insulating washer 1 see page 240

Sections

A value

µΩ

Pins

Ordering code

B65814-C1512-T1

41,5

Marking of pin 1

Ground Ø 1,3+0,1

Hole arrangement

View in mounting direction

(Note half pitch!)

239 08/01

RM 10

Accessories

B65814

Clamp

ꢀ With ground terminal, made of stainless spring steel (tinned), 0,45 mm thick

ꢀ Solderability to IEC 60068-2-20, test Ta, method 1 (aging 3): 235 °C, 2 s

ꢀ Also available as strip clamp on reels

Insulating washer 1 between core and coil former

ꢀ For tolerance compensation and for insulation

ꢀ Made of polycarbonate (UL 94 V-0, insulation class to IEC 60085: E 120 °C), 0,1 mm thick

Insulating washer 2 for double-clad PCBs

ꢀ Made of polycarbonate (UL 94 V-0, insulation class to IEC 60085: E 120 °C), 0,3 mm thick

Ordering code

Clamp (ordering code per piece, 2 are required)

Insulating washer 1 (reel packing, PU = 1 reel)

Insulating washer 2 (bulk)

B65814-A2203

B65814-B5000

B65814-B2005

Clamp

4,8 max.

0,7 x 0,45

FRM0259-D

Insulating washer 1

Insulating washer 2

240 08/01

RM 10

B63399

B65679

Accessories

Adjusting screw

ꢀ Tube core with thread and core brake made of GFR polyterephthalate

Plastic adjusting screwdriver (not shown)

Plastic handle for adjusting screwdriver (not shown)

Core RM 10

Adjusting screw

Min.

Ordering code

adjusting

range

Tube core

Material A value ∅ × length

Mate-

rial

Color

code

N 48

400

4,55 × 6,3

4,98 × 6,3

N 22

red

B65679-E3-X22

B65679-E2-X22

400

630

black

630

5,15 × 6,3

N 22

white

B65679-E1-X22

B63399-B1

Adjusting screwdriver

Handle

B63399-B5

Adjusting screw

241 08/01

Herausgegeben von EPCOS AG

Marketing Kommunikation, Postfach 80 17 09, 81617 München, DEUTSCHLAND

Verwertung dieser Broschüre und ihres Inhalts ohne ausdrückliche Genehmigung der EPCOS AG

nicht gestattet.

Mit den Angaben in dieser Broschüre werden die Bauelemente spezifiziert, keine Eigenschaften

zugesichert. Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen

für Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird.

Diese Broschüre ersetzt die vorige Ausgabe.

Fragen über Technik, Preise und Liefermöglichkeiten richten Sie bitte an den Ihnen nächstgele-

genen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaften im Ausland.

Bauelemente können aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Auskünfte

darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zuständige Vertriebsge-

sellschaft einzuholen.

Published by EPCOS AG

Marketing Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY

chure and the information contained therein without EPCOS’ prior express consent is prohibited.

The information contained in this brochure describes the type of component and shall not be con-

sidered as guaranteed characteristics. Purchase orders are subject to the General Conditions for

the Supply of Products and Services of the Electrical and Electronics Industry recommended by the

ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed.

This brochure replaces the previous edition.

For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or

the international Representatives.

Due to technical requirements components may contain dangerous substances. For information on

the type in question please also contact one of our Sales Offices.

相关型号：