B84114D0000B020 [EPCOS]

SIFI-D for high insertion loss; SIFI -D的高插入损耗


型号：	B84114D0000B020
厂家：	EPCOS
描述：	SIFI-D for high insertion loss SIFI -D的高插入损耗电源滤波器过滤器 LTE
文件：	总10页 (文件大小：148K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

EMC filters

2-line filters

SIFI-D for high insertion loss

Rated current 1 to 10 A

Series/Type:

B84114D

Date:

January 2006

 EPCOS AG 2006. Reproduction, publication and dissemination of this data sheet and the

information contained therein without EPCOS’ prior express consent is prohibited.

2-line filters

B84114D

SIFI-D for high insertion loss

Power line filters for 1-phase systems

Rated voltage 250 V DC/AC, 50/60 Hz

Rated current 1 to 10 A

Construction

■ 2-line filters

■ Metal case

■ Polyurethane potting (UL 94 V-0)

Features

■ Compact design

■ Optimized leakage current

■ Cost-optimized construction

■ Also for assembly on top-hat rails

■ ENEC10, UL and CSA approval

Applications

■ Switch-mode power supplies in

– industrial electronics

– telecommunications

– data systems

– medical equipment

■ DC applications

Case styles and terminal styles

Case style A

Tab connectors on face ends, lateral fixing lugs.

Particularly suitable for mounting on a shielding wall.

Case style B

Case style K

Tab connectors on face ends, fixing lugs on face ends.

IEC connector as per IEC 60320 C 14 on line side,

tab connectors on load side, mounting holes with metric thread.

Case style L

Litz wires on face ends, fixing lugs on face ends

Marking

Marking on component:

Manufacturer’s logo, ordering code,

rated voltage, rated current, rated temperature,

climatic category, date code

Minimum marking on packaging:

Manufacturer’s logo, ordering code

Please read Cautions and warnings and

Important notes at the end of this document.

01/06

2-line filters

B84114D

SIFI-D for high insertion loss

Circuit diagram

LOAD

L’

LINE

N’

SSB0238-A

Technical data and measuring conditions

Rated voltage V_R

Rated current I_R

Test voltage V_test

250 V DC/AC, 50/60 Hz

Referred to 40 °C ambient temperature

1414 V DC, 2 s (line/line)

2700 V DC, 2 s (lines/case)

Leakage current l_leak

Climatic category (IEC 60068-1)

Approvals

At 230 V AC, 50 Hz

25/085/21 (–25 °C/+85 °C/21 days damp heat test)

EN 133200, UL 1283, CSA C22.2 No.8

Please read Cautions and warnings and

Important notes at the end of this document.

01/06

2-line filters

B84114D

SIFI-D for high insertion loss

Characteristics and ordering codes

I_R

C_R

L_R

I_leakCase Approx. Ordering code

style weight

Mounting plate

for top-hat rail

mH mA

(ordering code)

V_R= 250 V DC/AC, 50/60 Hz

2 × 0.47 µF (X2) 2 ×

< 0.5

150

210

150

B84114D0000A010

B84114D0000B010 C62122A0132B092

B84114D0000K010

B84114D0000L010

—

5.6

2 × 4700 pF (Y2)

—

2 × 0.47 µF (X2) 2 ×

< 0.5

150

B84114D0000A020

B84114D0000B020 C62122A0132B092

B84114D0000L020

—

5.6

2 × 4700 pF (Y2)

—

2 × 0.47 µF (X2) 2 ×

150

210

150

B84114D0000A030

B84114D0000B030 C62122A0132B092

B84114D0000K030

B84114D0000L030

—

5.6

2 × 4700 pF (Y2)

—

2 × 0.47 µF (X2) 2 ×

< 0.5

230

290

230

B84114D0000A060

B84114D0000B060 C62122A0132B093

B84114D0000K060

B84114D0000L060

—

4.7

2 × 4700 pF (Y2)

—

2 × 0.68 µF (X2) 2 ×

420

B84114D0000A110

B84114D0000B110 C62122A0132B094

B84114D0000L110

—

4.7

2 × 4700 pF (Y2)

—

Please read Cautions and warnings and

Important notes at the end of this document.

01/06

2-line filters

B84114D

SIFI-D for high insertion loss

Case styles and dimensions

Case

style

I_R

Dimensions (mm)

b₁b₂b₃

b₄

l₁

l₂

l₃

l₄

h₁

h₂

Litz

Style

mm²1015

50.8 31.5 60.4 70

63.5

—

89.5 28.6 20

—

50.8 31.5

—

63.5 74.7 84.5 89.5 28.6 20

50.8

—

79.5

63.5 74.7 84.5

63.5

63.5 74.7 84.5 89.5 28.6 20

63.5 74.7 84.5 28.6

63.5 89.5 28.6 20

63.5 74.7 84.5 89.5 28.6 20

79.5

63.5 74.7 84.5

75.5

75.5 87.1 97 101.5 31.8 20

—

28.6

—

0.82 AWG18

50.8 31.5 60.4 70

—

89.5 28.6 20

—

50.8 31.5

50.8

—

0.82 AWG18

50.8 31.5 60.4 70

—

50.8 31.5

—

50.8

—

28.6

—

0.82 AWG18

50.8 31.5 60.4 70

—

101.5 31.8 20

—

50.8 31.5

—

50.8

—

92.5

75.5 87.1 97

—

31.8

—

0.82 AWG18

See dimensional drawing

50.8

—

92 103.1 113

—

44.5

—

1.35 AWG16

Please read Cautions and warnings and

Important notes at the end of this document.

01/06

2-line filters

B84114D

SIFI-D for high insertion loss

Case styles A

1 … 6 A (B84114D0000A010 … A060)

10 A (B84114D0000A110)

50.8

31.5

b₁

b₂

Tab connector A6.3 x 0.8

ø4.7

Tab connector A6.3 x 0.8

ø4.7

b₃

60.4

b₄

SSB0531-6-E

SSB0269-5-E

Case styles B

1 … 6 A (B84114D0000B010 … B060)

10 A (B84114D0000B110)

50.8

31.5

b₁

b₂

Tab connector A6.3 x 0.8

ø4.7

Tab connector A6.3 x 0.8

SSB0528-L-E

ø4.7

SSB0268-W-E

Please read Cautions and warnings and

Important notes at the end of this document.

01/06

2-line filters

B84114D

SIFI-D for high insertion loss

Case style K

Case style L

b₁

10 1

4 1

b₁

Tab connector A6.3 x 0.8

ø4.7

Panel cutout

ø4.5

GNYE

31.5

28.5

SSB0255-Z-E

40 0.2

SSB0529-U-E

Please read Cautions and warnings and

Important notes at the end of this document.

01/06

2-line filters

B84114D

SIFI-D for high insertion loss

Insertion loss (typical values at Z = 50 Ω)

unsymmetrical, adjacent branches terminated

common mode, all branches in parallel (asymmetrical)

differential mode (symmetrical)

Filters for 1, 2 and 3 A

Filters for 6 A

100

SSB0265-7

SSB0266-F

100

B84114D0000*010

B84114D0000*020

B84114D0000*030

B84114D0000*060

10⁴

10⁵

10⁶

10⁷Hz 10⁸

10⁴

10⁵

10⁶

10⁷Hz 10⁸

Filters for 10 A

100

SSB0267-N

B84114D0000*110

10⁴

10⁵

10⁶

10⁷Hz 10⁸

Please read Cautions and warnings and

Important notes at the end of this document.

01/06

EMC filters

Cautions and warnings

Important information

Please read all safety and warning notes carefully before installing the EMC filter and putting it into

operation (see

). The same applies to the warning signs on the filter. Please ensure that the signs

are not removed nor their legibility impaired by external influences.

Death, serious bodily injury and substantial material damage to equipment may occur if the appro

priate safety measures are not carried out or the warnings in the text are not observed.

Using according to the terms

The EMC filters may be used only for their intended application within the specified values in low

voltage networks in compliance with the instructions given in the data sheets and the data book.

The conditions at the place of application must comply with all specifications for the filter used.

Warnings

■ It shall be ensured that only qualified persons (electricity specialists) are engaged on work such

as planning, assembly, installation, operation, repair and maintenance. They must be provided

with the corresponding documentation.

■ Danger of electric shock. EMC filters contain components that store an electric charge. Danger

ous voltages can continue to exist at the filter terminals for longer than five minutes even after

the power has been switched off.

■ The protective earth connections shall be the first to be made when the EMC filter is installed and

the last to be disconnected. Depending on the magnitude of the leakage currents, the particular

specifications for making the protective-earth connection must be observed.

■ Impermissible overloading of the EMC filter, such as impermissible voltages at higher frequen

cies that may cause resonances etc. can lead to destruction of the filter housing.

■ EMC filters must be protected in the application against impermissible exceeding of the rated

currents by suitable overcurrent protective.

01/06

EMC filters

Important notes

The following applies to all products named in this publication:

1. Some parts of this publication contain statements about the suitability of our products for

certain areas of application. These statements are based on our knowledge of typical

requirements that are often placed on our products in the areas of application concerned. We

nevertheless expressly point out that such statements cannot be regarded as binding

statements about the suitability of our products for a particular customer application. As

a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them

than the customers themselves. For these reasons, it is always ultimately incumbent on the

customer to check and decide whether an EPCOS product with the properties described in the

product specification is suitable for use in a particular customer application.

2. We also point out that in individual cases, a malfunction of passive electronic components

or failure before the end of their usual service life cannot be completely ruled out in the

current state of the art, even if they are operated as specified. In customer applications

requiring a very high level of operational safety and especially in customer applications in which

the malfunction or failure of a passive electronic component could endanger human life or health

(e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of

suitable design of the customer application or other action taken by the customer (e.g.

installation of protective circuitry or redundancy) that no injury or damage is sustained by third

parties in the event of malfunction or failure of a passive electronic component.

3. The warnings, cautions and product-specific notes must be observed.

4. In order to satisfy certain technical requirements, some of the products described in this

publication may contain substances subject to restrictions in certain jurisdictions (e.g.

because they are classed as “hazardous”). Useful information on this will be found in our

Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more

detailed questions, please contact our sales offices.

5. We constantly strive to improve our products. Consequently, the products described in this

publication may change from time to time. The same is true of the corresponding product

specifications. Please check therefore to what extent product descriptions and specifications

contained in this publication are still applicable before or when you place an order.

We also reserve the right to discontinue production and delivery of products.

Consequently, we cannot guarantee that all products named in this publication will always be

available.

6. Unless otherwise agreed in individual contracts, all orders are subject to the current version

of the “General Terms of Delivery for Products and Services in the Electrical Industry”

published by the German Electrical and Electronics Industry Association (ZVEI).

7. The trade names EPCOS, EPCOS-Jones, Baoke, CeraDiode, CSSP, MLSC, PhaseCap,

PhaseMod, SIFI, SIKOREL, SilverCap, SIMID, SIOV, SIP5D, SIP5K, UltraCap, WindCap are

trademarks registered or pending in Europe and in other countries. Further information will be

found on the Internet at www.epcos.com/trademarks.

10 01/06

B84114D0000B020 [EPCOS]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E