B84299-D1160-E1 [EPCOS]

250V, 50/60Hz, THREE PHASE EMI FILTER;


型号：	B84299-D1160-E1
厂家：	EPCOS
描述：	250V, 50/60Hz, THREE PHASE EMI FILTER LTE
文件：	总8页 (文件大小：205K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Filters for Power Lines

B84299-+1***-B1

B84299-+1***-E1

16 to 100 A, 100 dB from 150 kHz

Filter für:Netzleitungen

Two- and four-line filters

16 to 100 A

Single-stage

Stopband attenuation up to 40 GHz

Features

ꢀ General-purpose use through design with separate lines without intercoupling

ꢀ Use of single chokes

ꢀ Insertion loss to CISPR 17

Design

The electrical components are incorporated in an RF-tight case of stainless steel. The cables enter

through glands. The RF-tight termination of the openings is produced by specially shaped lids.

The conductors and equipment grounding conductor are connected by threaded bolts. The space

around the fixing holes is left as bare metal (unpainted) to ensure good RF contact with metal sur-

faces (chassis, ground).

Protective measures (grounding)

The high capacitances between the lines and ground require special protective measures. If there

are no product-specific requirements, protection with a secondary ground wire (diameter min.

10 mm²) in accordance with EN 50178 is necessary. For this purpose the filter case have connect-

ing bolts at each end.

Resistors are incorporated in the filter to discharge capacitors after turn-off.

Installation

Filters are supplied complete with all parts required for RF-tight installation (fixing screws, flanges,

RF gaskets, cable glands) and installation instructions.

No welding is needed on the shielding wall, so any subsequent installation is quite simple. And the

uniform template of the attachment points allows straightforward replacement of a two-line filter by

a four-line filter for example.

Accessories and special versions

RF-tight flexible connector fittings in widths of 25 and 40 mm are available for installation spaced

away from the shielding wall.

Filters with an EMP protection add-on for surge currents up to 100 kA per line are available on

request.

To match requirements, filters can be supplied with different kinds of EMC or shielding cable glands.

Tests

All filters are 100 % tested and the results are archived under a filter’s serial number. If required, a

test report can be generated for the serial number.

15 12/01

Filters for Power Lines

B84299-+1***-B1

B84299-+1***-E1

16 to 100 A, 100 dB from 150 kHz

Circuit diagrams

Two-line filters B84299-+1***-B1

1‘

2‘

SSB1691-Q-E

Four-line filters B84299-+1***-E1

1‘

2‘

3‘

4‘

SSB1692-Y-E

Insertion loss α_e(typical values at Z = 50 Ω)

SSB1694-F-E

120

Measurement circuit

Measurement limit

Ω

^e100

up to 40 GHz

Ω

Filter

V₀

V₂

V₀

= 20 lg

[dB]

α _e

2 V₂

SSB1693-7-E

10⁴

10⁵

10⁶

10⁷

10⁸Hz 10⁹

16 12/01

Filters for Power Lines

B84299-+1***-B1

B84299-+1***-E1

16 to 100 A, 100 dB from 150 kHz

General technical data

Rated voltage V_R

250 V

line/line

for two-line filters

line/case

Rated voltage V_R

for four-line filters

440 V

250 V

line/line

line/case

Rated current I_R

see characteristics referred to + 40°C ambient temperature

(next page)

Max. admissible overcurrent I_over

75 I_Rfor 50 ms

10 I_Rfor 1 s

I_Rfor 1 min

1,4 I_Rfor 15 min

Rated frequency f_R

Test voltages V_T

50/60 Hz

1200 Vdc, 2 s

line/line

line/case

Voltage drop/phase ∆V

DC resistance R_max

< 1 %

of V_Rat 50 Hz and I_R

see characteristics per line

(next page)

Power dissipation P_D

see characteristics at I_R

(next page)

Capacitive reactive

1 A

at 400/230V and 50 Hz (typical value)

current/line I_reactive

Climatic category

25/085/56

(−25 °C/+85 °C/56 days damp heat test)

to EN 60068-1

Mechanical version

cable glands at both ends

or flexible connector fitting

direct connection to shielding wall

Weight (approx.)

18 kg

20 kg

two-line filters

four-line filters

17 12/01

Filters for Power Lines

B84299-+1***-B1

B84299-+1***-E1

16 to 100 A, 100 dB from 150 kHz

Characteristics and ordering codes

I_R

Mechanical R_max

P_D

Ordering code

version

mΩ

Two-line filters

2 × 16

2 × 32

2 × 63

2 × 100

< 14

B84299-C1160-B1

B84299-D1160-B1

B84299-C1320-B1

B84299-D1320-B1

B84299-C1630-B1

B84299-D1630-B1

B84299-C1101-B1

B84299-D1101-B1

3,5

< 11

< 25

< 30

3,5

3,0

1,5

Four-line filters

4 × 16

4 × 32

4 × 63

4 × 100

< 14

< 20

< 35

< 45

B84299-C1160-E1

B84299-D1160-E1

B84299-C1320-E1

B84299-D1320-E1

B84299-C1630-E1

B84299-D1630-E1

B84299-C1101-E1

B84299-D1101-E1

3,5

3,0

1,5

18 12/01

Filters for Power Lines

B84299-+1***-B1

B84299-+1***-E1

16 to 100 A, 100 dB from 150 kHz

Dimensional drawings

Mechanical version C (cable glands at both ends)

Shielded end

<155

Cable gland

288

268

Input end

RAL 7035 color

(light gray, semigloss)

SSB1695-N-E

I_R

Fittings

Suitable for cable

outer diameter

Package

Suitable for cable

outer diameter

Cable gland PG 29

with cutout

sealing ring

17 to 19 mm

20 to 22 mm

23 to 25 mm

26 to 28 mm

Cable gland PG 21

and reducer rings

9 to 11 mm

12 to 14 mm

15 to 17 mm

18 to 20 mm

—

100

Cable gland PG 42

with cutout

sealing ring

29 to 31 mm

32 to 34 mm

35 to 37 mm

38 to 40 mm

Cable gland PG 29

and reducer rings

RF-tight connection to shielding wall, see page 21.

19 12/01

Filters for Power Lines

B84299-+1***-B1

B84299-+1***-E1

16 to 100 A, 100 dB from 150 kHz

Mechanical version D (direct connection to shielding wall)

Hole PG 29 ( 37)

for 100 A: PG 42 ( 54)

Shielded end

<155

Connecting bolt M8

(at each end)

288

268

Input end

RAL 7035 color

(light gray, semigloss)

SSB1696-W-E

I_R

Fittings

Suitable for cable

outer diameter

Package

Suitable for cable

outer diameter

Cable gland PG 29

with cutout

sealing ring

17 to 19 mm

20 to 22 mm

23 to 25 mm

26 to 28 mm

Cable gland PG 21

and reducer rings

9 to 11 mm

12 to 14 mm

15 to 17 mm

18 to 20 mm

—

100

Cable gland PG 42

with cutout

sealing ring

29 to 31 mm

32 to 34 mm

35 to 37 mm

38 to 40 mm

Cable gland PG 29

and reducer rings

RF-tight connection to shielding wall, see page 21.

20 12/01

Filters for Power Lines

B84299-+1***-B1

B84299-+1***-E1

16 to 100 A, 100 dB from 150 kHz

RF-tight connection to shielding wall with flexible connector fitting (mechanical version C)

Flexible connector fitting

Shielded end

Shielding wall

RF gasket

SSB1960-E-E

I_R

Flexible connector fitting

Ordering code

(must be ordered separately)

B84298-A42-L** ¹⁾

B84298-A44-L** ¹⁾

16 ... 63 Width 25 mm

100 Width 40 mm

RF-tight connection to shielding wall (mechanical version D)

Cable gland

Shielding wall

RF gasket

– Self-locking screw M8 × 20

– Self-locking nut M8 (in package)

SSB1697-5

I_R

Cable gland

Hole in shielding wall

37 + 0,5 mm

Bare metal area

on shielding wall

PG 29 with long thread and

55 +5 mm

RF gasket; check nut in package

100

PG 42

54 + 0,5 mm

70 +5 mm

1) ** add required length in cm (see also page 107 ff)

21 12/01

Herausgegeben von EPCOS AG

Marketing Kommunikation, Postfach 80 17 09, 81617 München, DEUTSCHLAND

Verwertung dieser Broschüre und ihres Inhalts ohne ausdrückliche Genehmigung der EPCOS AG

nicht gestattet.

Mit den Angaben in dieser Broschüre werden die Bauelemente spezifiziert, keine Eigenschaften

zugesichert. Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen

für Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird.

Diese Broschüre ersetzt die vorige Ausgabe.

Fragen über Technik, Preise und Liefermöglichkeiten richten Sie bitte an den Ihnen nächstgele-

genen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaften im Ausland.

Bauelemente können aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Auskünfte

darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zuständige Vertriebsge-

sellschaft einzuholen.

Published by EPCOS AG

Marketing Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY

chure and the information contained therein without EPCOS’ prior express consent is prohibited.

The information contained in this brochure describes the type of component and shall not be con-

sidered as guaranteed characteristics. Purchase orders are subject to the General Conditions for

the Supply of Products and Services of the Electrical and Electronics Industry recommended by the

ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed.

This brochure replaces the previous edition.

For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or

the international Representatives.

Due to technical requirements components may contain dangerous substances. For information on

the type in question please also contact one of our Sales Offices.

相关型号：