B88069X0680T502 [EPCOS]

Switching spark gap; 开关火花隙


型号：	B88069X0680T502
厂家：	EPCOS
描述：	Switching spark gap 开关火花隙开关
文件：	总4页 (文件大小：50K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Switching spark gap

SSG with lead wires

Series/Type:

CAS02X-068

Ordering code:

B88069X0680T502

Version/Date:

Issue 05 / 2007-11-22

Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! Please fill in the

table and then change the color to "white" (or invisible). This ensures that the table disappears for the customer

PDF. To update the data sheet, click on the symbol "Preview" and then "Close". Please do not alter the header or

footer when copying the content.

Identification/Classification 1:

(header 1 + top left header bar)

Switching spark gap

SSG with lead wires

B88069X0680T502

CAS02X-068

Identification/Classification 2:

(header 2 + bottom left header bar)

Ordering code:

(top right header bar)

Series/Type:

(top right header bar)

Preliminary data (optional):

(if necessary)

Department:

Date:

KB AB E / KB AB PM

Issue 05 / 2007-11-22

contained therein without EPCOS' prior express consent is prohibited.

Switching spark gap

SSG with lead wires

B88069X0680T502

CAS02X-068

Features

Applications

Ignition circuits

Extremely long life time

Stable performance over life

Insensitive performance against variations in

temperature

Low switching losses

Very short breakdown time

High reliability by robust design

RoHS compatible

Electrical specifications

DC spark-over voltage ^{1) 2)}

200 ... 255

Initial values

Ignition time t_Iafter 150 hours in darkness ³⁾

≤ 4

≤ 2

99.9

100

≤ 7

≤ 4

at –20 °C

at +25; 125 °C

≤ 5

≤ 3

Electrical life time

Maximum increase of DC spark-over voltage

Switching operations at +25; 125 °C

Switching frequency 10 … 25 Hz

Switching frequency < 10Hz

2 000 000

4 000 000

Ignitions

Test circuit parameters

Open circuit voltage V_0'

Loading resistance R

Discharge capacitance C

Inductance L

230

2.2

~ 300

V_ac

kΩ

µF

µH

Discharge peak current I_P

Insulation resistance at 100 V_dc

Capacitance at 1 MHz

> 0.1

GΩ

< 2

Weight

~ 1.5

Operation and storage temperature

Climatic category (IEC 60068-1)

Marking, red positive

-20 ... +125

20/ 125/ 21

°C

CS 230 YYMM O

230

- Series

- Nominal voltage

- Year of production

- Month of production

- Non radioactive

KB AB E / KB AB PM

Issue 05 / 2007-11-22

Please read Cautions and warnings and

Page 2 of 4

Important notes at the end of this document.

Switching spark gap

SSG with lead wires

B88069X0680T502

CAS02X-068

At delivery AQL 0.65 level II, DIN ISO 2859

In ionized mode, after load

Time from capacitor charged to the first high voltage spark

Test circuit: V_ac= 198 V; R = 36 kΩ; C = 2.2 µF

Dimensional drawing

Not to scale

Dimensions in mm

Non controlled document

Cautions and warnings

Switching spark gaps may be used only within their specified values.

Damaged switching spark gaps must not be re-used.

KB AB E / KB AB PM

Issue 05 / 2007-11-22

Please read Cautions and warnings and

Page 3 of 4

Important notes at the end of this document.

Important notes

The following applies to all products named in this publication:

1. Some parts of this publication contain statements about the suitability of our products for

certain areas of application. These statements are based on our knowledge of typical

requirements that are often placed on our products in the areas of application concerned. We

nevertheless expressly point out that such statements cannot be regarded as binding

statements about the suitability of our products for a particular customer application. As a

rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them

than the customers themselves. For these reasons, it is always ultimately incumbent on the

customer to check and decide whether an EPCOS product with the properties described in the

product specification is suitable for use in a particular customer application.

2. We also point out that in individual cases, a malfunction of passive electronic components

or failure before the end of their usual service life cannot be completely ruled out in the

current state of the art, even if they are operated as specified. In customer applications

requiring a very high level of operational safety and especially in customer applications in which

the malfunction or failure of a passive electronic component could endanger human life or health

(e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of

suitable design of the customer application or other action taken by the customer (e.g. installation

of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the

event of malfunction or failure of a passive electronic component.

3. The warnings, cautions and product-specific notes must be observed.

4. In order to satisfy certain technical requirements, some of the products described in this

publication may contain substances subject to restrictions in certain jurisdictions (e.g.

because they are classed as hazardous). Useful information on this will be found in our Material

Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed

questions, please contact our sales offices.

5. We constantly strive to improve our products. Consequently, the products described in this

publication may change from time to time. The same is true of the corresponding product

specifications. Please check therefore to what extent product descriptions and specifications

contained in this publication are still applicable before or when you place an order.

We also reserve the right to discontinue production and delivery of products. Consequently,

we cannot guarantee that all products named in this publication will always be available.

The aforementioned does not apply in the case of individual agreements deviating from the

foregoing for customer-specific products.

6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of

the “General Terms of Delivery for Products and Services in the Electrical Industry”

published by the German Electrical and Electronics Industry Association (ZVEI).

7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSSP, MiniBlue, MKK, MLSC, MotorCap,

PCC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SIMID,

SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or

pending in Europe and in other countries. Further information will be found on the Internet at

www.epcos.com/trademarks.

Page 4 of 4

相关型号：