ESPP-MIT1-0010BG-03-03-08 [ES]

Strain Gauge Pressure Transmitter;


型号：	ESPP-MIT1-0010BG-03-03-08
厂家：	ES Systems
描述：	Strain Gauge Pressure Transmitter 仪表
文件：	总8页 (文件大小：651K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Datasheet ESPP-MIT1

Strain Gauge Pressure Transmitter

•

Excellent performance at very low cost

Micro-fused technology

Pressure Type: Gauge

Calibrated & temperature compensated output

Full Scale (FS) Pressure Range: from 7 to 1000 bar

Analog Output: 4-20mA, 05.-4.5V, 1-5V, 0-5V

Compensation temperature: -10^oC ... 80^oC

Operating temperature: -40^oC … 125^oC

Total error: ≤ ±1%FS

Integrated stainless steel construction, full sealed (IP65)

Compact structure

Wide range of process interfaces

Product Summary

ES Systems has developed a series of pressure sensor transmitters featuring very good

accuracy at low cost. Each module is based on all welded hermetically sealed structure in a

single stainless-steel piece. The ESPP-MIT1 is a medium isolated pressure sensor suitable for

gas or fluid pressure measurements in harsh environments.

The output is fully calibrated and temperature compensated based on the internal

temperature sensor and the factory calibration coefficients which are stored in the embedded

memory. Thus, the transducer is ready to be installed directly to the end user system without

further processing.

ESPP-MIT1 comes with a variety of electrical interfaces output signal types and process

interfaces. It is one of the most cost-effective solutions especially when high volumes are

required.

Typical Applications

•

Central air conditioning control systems

Engineering machinery

Energy & water treatment systems

Hydraulic & pneumatic systems

Industrial process control & automatic detection systems

Pumps & compressors

Refrigeration systems

v1.5

Datasheet ESPP-MIT1

1. Operating Specifications

Characteristic

Pressure Type

Pressure Range

Min.

Typ.

Max.

Unit

Gauge

Up to 1000

bar

Power Supply (V_supply

)

+28

Current Consumption

Total Error Band¹

±1.0

%F.S.²

^oC[^oF]

Operating temperature range³

Compensated temperature range⁴

-40[-40]

-10[14]

-40[-40]

+125[257]

80[176]

+125[257]

Storage temperature range

Output

Calibrated Pressure

Output Interface (Out)

Current Output Load Resistance

Voltage Output Load Resistance

4-20mA, 0.5-4.5V, 1-5V, 0-5V⁵

≤ (V_supply– 8) / 0.02

Ohm

10K

Response Time⁶

Warm-up Time⁷

Media Compatibility

Material

msec

100

msec

Gases, Liquids

Stainless Steel 17-4PH

IP65

IP rating

Certifications

O-ring sealing

CE, RoHS, REACH

Viton

¹Total Error Band: The maximum deviation from ideal transfer function over the entire compensated temperature and

pressure range. Includes all errors due to offset, full scale span, pressure non-linearity, pressure hysteresis,

repeatability, thermal effect on offset, thermal effect on span and thermal hysteresis

²% of the full scale pressure range

³Operating temperature range: The temperature range over which the sensor will produce an output proportional to

pressure

⁴Compensated temperature range: The temperature range over which the sensor will produce an output proportional

to pressure within the specified performance limits.

⁵For 0-5V output, V_supplyis +11V to +28V.

⁶Response Time: The time it takes for the electrical output to go from 10%FS signal to 90%FS signal and vice versa.

⁷Warm-up Time: Time to the first valid pressure measurement after power is applied.

2/8

Datasheet ESPP-MIT1

2. Wiring Diagrams

2 wire (current)

3 wire (voltage)

3. Pressure Specifications (bar)

Pressure Range

Option

Over Pressure¹

Burst Pressure²

P_min

P_max

0007BG

0010BG

0016BG

0030BG

0050BG

0100BG

0150BG

0250BG

0300BG

0350BG

0400BG

0600BG

0800BG

150

100

200

300

500

600

700

800

1200

1500

250

100

150

250

300

350

400

600

800

1000

500

750

1250

1500

1750

2000

1000BG

Overpressure: The maximum pressure which may safely be applied to the product for it to remain in specification

once pressure is returned to the operating pressure range. Exposure to higher pressures may cause permanent

damage to the product. Unless otherwise specified this applies to all available pressure ports at any temperature with

the operating temperature range

Burst pressure: The maximum pressure that may be applied to the specified port of the product without causing

escape of pressure media. Product should not be expected to function after exposure to any pressure beyond the

burst pressure

3/8

Datasheet ESPP-MIT1

4. Output Type

01. M12

02. ISO4400 (Form C )

03. Cable (0.5m)

04. Packard

Current

Voltage

Current

Voltage

Current

Black

Voltage

Black

Current

Voltage

V_supply

Gnd¹

Out

Red

Yellow

Red

Chassis

¹Note that V_supply& Gnd are reverse polarity protected

5. Electrical Connector & Mechanical Dimensions

01. M12

02. ISO4400

03. Cable

04. Packard

¹Note all dimensions are in millimeters (mm)

In order to calculate the total height of each of the options above, the height of the mechanical dimensions must be

added to the height of the process interface (see section 5).

4/8

Datasheet ESPP-MIT1

6. Process Interface (dimensions in mm)

01. 1/2” NPT male ¹

04. G1/4” male ²

07. G3/8” male ²

02. 1/4” NPT male ¹

03. G1/2” male ²

05. 1/8” NPT male ¹

06. G1/8” male ²

08. 1/4” NPT female ¹

09. 1/8” NPT female ¹

5/8

Datasheet ESPP-MIT1

6. Process Interface (dimensions in mm)

10. G1/4” Female ³

11. R1/4” male ⁴

12. 7/16-20 UNF-2B ⁵

13. M12x1 male ⁶

14. M14x1.5 male ⁷

15. M20x1.5 male ⁷

¹According to ANSI/ASME B1.20.1

²According to ISO 1179-2 (DIN 3852-E)

³According to EN837

⁴According to ISO7

⁵According to SAE J513

⁶According to GB/T193

⁷According to ISO 9974-2 (DIN 3852-E)

Note that for pressure ranges greater than 200bar, only options 02, 03, 04, 07 and 15 are available.

6/8

Datasheet ESPP-MIT1

7. Pressure Conversion Table

Option

Output Type

Equation

01.

4-20mA

0.5 - 4.5V

1- 5V

0- 5V

8. Ordering Information

ESPP-MIT1-NNNNNN-NN-NN-NN

Process Interface

Pressure Range Full Scale

1/2” NPT male

1/4” NPT male

G1/2” male

0007BG

0010BG

0016BG

0030BG

0050BG

0100BG

0150BG

0250BG

0300BG

0350BG

0400BG

0600BG

0800BG

1000BG

7 bar

10 bar

16 bar

Output Type

G1/4” male

30 bar

4-20mA

0.5-4.5V

1-5V

1/8” NPT male

G1/8” male

50 bar

100 bar

150 bar

250 bar

300 bar

350 bar

400 bar

600 bar

800 bar

1000 bar

G3/8” male

0-5V

1/4” NPT female

1/8” NPT female

G1/4” female

R1/4” male

Connector

M12

ISO4400

7/16-20 UNF-2B

M12x1 male

M14x1.5 male

M20x1.5 male

Cable (0.5m)

Packard

7/8

Datasheet ESPP-MIT1

Important Notes

No warranty applies to any party other than the original

Customer. The remedies of the Customer set forth

herein are exclusive and the total liability of ES Systems

with respect to this order, whether based on contract,

warranty, negligence, indemnification, strict liability or

otherwise, shall not exceed the purchase price of the

component upon which liability is based.

PERSONAL INJURY

DO NOT USE these products as safety or emergency

stop devices, or in any other application where

failure of the product could result in personal injury.

Failure to comply with these instructions could result in

death or serious injury.

In no event shall ES Systems be liable for consequential,

incidental or special damages.

WARRANTY

ES Systems warrants this Product to be free of defects in

materials and workmanship for a period of one (1) year

from the date of purchase.

Specifications may change without notice. The

information supplied is believed to be accurate and

reliable as of this issue; however, ES Systems assumes no

responsibility for its use.

Upon examination by ES Systems, if the unit is found to

be defective it will be repaired or replaced at no charge.

ES Systems' WARRANTY does not apply to defects

resulting from any action of the purchaser, including but

not limited to mishandling, improper interfacing,

operation outside of design limits, improper repair, or

unauthorized modification. This WARRANTY is VOID if the

unit shows evidence of having been tampered with or

Contact Information

ES Systems S.A.

Head Office:

7, Stratigi St., GR-154 51

Neo Psychico, Greece

Tel: (+30) 210 672 8610,

Fax (+30) 210 672 8624

shows evidence of being damaged as

excessive corrosion; or current, heat, moisture or

vibration;

a result of

Factory:

57, I.Metaxa str., GR-194 41

Koropi, Greece

Tel: (+30) 216 2000 500,

Fax (+30) 216 2000 555

improper specification; misapplication; misuse or other

operating conditions outside of ES Systems' control.

Components which wear are not warranted.

ES Systems neither assumes responsibility for any

omissions or errors nor assumes liability for any

damages that result from the use of its Product in

accordance with information provided by ES Systems,

either verbal or written. ES Systems warrants only that

the parts manufactured by it will be as specified and free

of defects.

ES SYSTEMS MAKES NO OTHER WARRANTIES OR

REPRESENTATIONS OF ANY KIND WHATSOEVER,

EXPRESSED OR IMPLIED, EXCEPT THAT OF TITLE, AND

ALL

IMPLIED

WARRANTIES

INCLUDING

ANY

WARRANTY OF MERCHANTABILITY AND FITNESS FOR

A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED.

No representative of ES Systems is authorized to extend

this Warranty or to change it in any manner whatsoever.

8/8

相关型号：