483-G120-J2 [ETAL]

Aircraft systems and equipment (fixed wing and helicopters); other extra low voltage wiring applications; defence equipment; communications systems;


型号：	483-G120-J2
厂家：	ETAL Group
描述：	Aircraft systems and equipment (fixed wing and helicopters); other extra low voltage wiring applications; defence equipment; communications systems
文件：	总4页 (文件大小：308K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

High Performance Thermal Circuit Breaker 483-...

Description

Single pole, miniaturised, aircraft style thermal circuit breaker with

tease-free, trip-free, snap action mechanism and push/pull on/off manual

actuation (M-type TO CBE to EN 60934). An indicator band on the

push button clearly shows the tripped/off position. Threadneck panel

mounted, available in metric and US (MS 3320) configurations. Advanced

two-chamber design contributes to fail-safe operation. Temperature

compensated from -55 °C to +125 °C, with optional auxiliary contacts,

and fully approved for use on a wide range of aircraft and equipment. Full

specification ensures suitability for the most demanding applications. For

three pole version see type 583.

Typical applications

483-...

without auxiliary contact

with auxiliary contact

Aircraft systems and equipment (fixed wing and helicopters);

other extra low voltage wiring applications; defence equipment;

communications systems.

Technical data

Voltage rating

AC 115 V (300 Hz to 800 Hz); DC 28 V

(higher voltage ratings upon request)

Standard current ratings and typical volt drop values

Current rating range

Auxiliary circuit

Typical life

1...35 A

Current rating (A)

Volt drop (mV) Current rating (A) Volt drop (mV)

0.5 A, DC 28 V

750

520

400

360

350

260

230

190

200

170

160

150

20,000 operations mechanical or

10,000 operations at I_N(≤ 25 A)

5,000 operations at I_N(30 + 35 A)

2.5

Ambient temperature

-55...+125 °C (-67...+257 °F)

Insulation co-ordination

(IEC 60664 and 60664A) withstand voltage

1.5 kV

rated impulse

pollution

degree

Dielectric strength

(IEC 60664 and 60664A)

operating area

7.5

test voltage

AC 1,500 V

main to aux. circuit

Insulation resistance

> 100 MΩ (DC 500 V)

Approvals

Interrupting capacity I_cn

AC 115 V (400 Hz): 5 A

7.5...35 A 2,500 A

1...25 A 6,000 A

2,000 A

Authority

Standard

Rated voltage

Current

ratings

DC 28 V:

30 + 35 A 4,000 A

UL 1077

AC 250 V

DC 75 V

1 A…25 A

1 A…35 A

Degree of protection

(IEC 60529/DIN 40050)

operating area IP40

terminal area IP00

CSA

C22.2 No

235

AC 250 V

DC 75 V

1 A…25 A

1 A…35 A

Vibration

(sinusoidal)

15 g (70-2000 Hz), 0.76 mm (5-70 Hz)

to VG 95210, sheet 19,

AC 115 V, 400 Hz

DC 28 V

1 A…25 A

VG 95345,

part 6

IEC 60068-2-6, test Fc/ISO 7137

Vibration (random)

16.4 g rms, 0.2 g /Hz 1.5 dB

LN 29886

AC 115 V, 400 Hz

DC 28 V

1 A…25 A

to VG 95210, sheet 29, ISO 7137

Acceleration

Shock

17 g, to ISO 2669

QPL Canada

Dep. of National

Defence

VG 95345, AC 115 V, 400 Hz

1 A…25 A

75 g (11 ms) to VG 95210, sheet 28,

IEC 60068-2-27, test Ea/ISO 7137

DC 28 V

part 6

Corrosion

96 hours at 5 % salt mist, severity A

48 hours at 20 % salt mist, severity B

to VG 95210, sheet 2,

QPL Sweden

Defence

Material Admin.

LN 29886

MS 3320

AC 115 V, 400 Hz

DC 28 V

1 A…25 A

IEC 60068-2-11, test Ka/ISO 7137

QPL UK

Ministery of

Defence

LN 29886

AC 115 V, 400 Hz 1 A…25 A

DC 28 V 1 A…25 A

Humidity

Explosion

240 hours at 95 % RH,

to VG 95210, sheet 7,

IEC 60068-2-3, test C/ISO 7137

to VG 95210, sheet 10,

MIL-STD-202, meth. 109

Dep. of the

Navy

MS 3320

(V)

AC 115 V, 400 Hz 1 A…20 A

DC 28 V 1 A…20 A

Altitude

Mass

≤ 25,000 m above sea level

max. 29 g with auxiliary contact

max. 25 g without auxiliary contact

Weight reduction through aluminium threadneck: approx. 3 g

1646

www.e-t-a.de

High Performance Thermal Circuit Breaker 483-...

Ordering information

Ordering information for approved devices

Type No.

483 single pole, with temperature compensation

483-G411-K1M1-A1S0ZN

Metric threadneck M12x1 and terminal design -K14 (M4x6), listed

by the German Materialamt der Bundeswehr to VG 95345 T06.

Mounting

G threadneck panel mounting, standard

Threadneck design

483-G533-J1M1-B2S0ZN (MS 3320)

Threadneck size 7/16-32UNSx6.4 and terminal design -J14

(inch thread 8-32), approved to MS 3320.

1 M12x1x6.4x8.8 dia. with mounting plate (aux. contact version)

3 MJ12x6.4x8.8 dia. (without aux. contact)

4 M12x1x6.4x8.8 dia. (without aux. contact)

5 7/16-32UNx6.4x7.8 dia. (without aux. contact)

6 M12x1x9.4x8.8 dia. (without aux. contact)

Hardware for threadneck (washers)

0 without hardware

1 wave washer 12/15 - mounted

2 mounted washer 12.1/17.2 - mounted

3 mounted washer 11.3/14.9 - mounted

(threadneck design 5,7 only)

483-G533-J3M1-C4S0Z (483-TC-G11-J25)

Threadneck size 7/16-32UNSx6.4 and terminal design -J25

(inch thread 6-32), listed by the German Materialamt der

Bundeswehr to VG 95345, part 6.

Internal connection diagrams

Hardware for threadneck (nuts)

without hardware

hex nut M12x1 (threadneck design 1, 4, 6 only)

hex nut 7/16-32UN (threadneck design 5, 7 only)

hex nut M12x1, aluminium, fitted (threadneck design 8 only)

hex nut MJ12x1 (only with threadneck design 3)

Terminal design (main terminals)

K screws terminals with metric thread

1 K14 (M4, MJ4)

ꢀꢁꢂꢃ ꢄ

J screw terminals with inch thread

1 J14 (8-32UNC-2B)

2 J17 (8-32UNC-2B)

3 J25 (6-32UNC-2B)

Characteristic curve

ꢀꢁꢂꢃ ꢄꢅꢆꢁꢇꢁꢄꢈꢉ ꢊꢋꢌꢂꢄꢊꢂ

ꢀꢁꢂꢃ ꢍꢋꢇꢄꢈꢁꢎꢏꢐ ꢄꢅꢆꢁꢇꢁꢄꢈꢉ ꢊꢋꢌꢂꢄꢊꢂ

M1 thermal, 1.15-1.38 I_N

ꢀꢁꢂꢃ 1

ꢆ

Terminal screws

A Phillips screw M4x6

B Phillips screw 8-32UNC-2Ax6 (MS 51957-41)

C Phillips screw 6-32UNC-2Ax6 (MS 51957-26)

D slotted flat head screw M4x6

E hex screw with Phillips head 8-32UNC-3A-9.5

L Phillips screw MJ4x6

Z without accessories

Terminal washers

ꢄ

1ꢄ

ꢄ

ꢅ

0 without lock washer

1 lock washer B4

2 lock washer 4.3 (MS 35338-137)

4 lock washer 3.7 (MS 35338-136)

Auxiliary contact

S0 without auxiliary contact

S1 with auxiliary contact (N/C) connector

to EN3155-016M2018, size 20

S5 with polarized auxiliary contact (N/C)

Barrier

without barrier (standard)

Colour of the push button

blank: black (standard) (e. g. 7.5)

black, marking to EN (e. g. 7 1/2)

Current ratings

1...35 A

483 - G 4 1 1 - K 1 M1 - A 1 S0

. - 5 A ordering example

Preferred types

Standard current ratings (A)

2.5

7.5

483-G411-K1M1-A1S0Z-

483-G411-K1M1-A1S0ZN- (VG 95345 T06)

www.e-t-a.de

1646

High Performance Thermal Circuit Breaker 483-...

Dimensions 483-G411-K1M1-A1S0ZN (VG 95345 T06)

(VG 95345 T06)

Dimensions 483-G111-K1M1-A1S1ZN

ꢀꢁꢂꢃꢀꢄꢅꢁꢅꢂ ꢀꢆꢇꢈꢉꢄ ꢊꢋꢌꢍ 4 ꢎꢊ

ꢎꢏꢐꢑꢎꢓꢍꢏꢍꢐ ꢎꢋꢟꢠꢌꢓ ꢊꢝꢛꢄ 4 ꢡꢊ

ꢄ1ꢅꢆ1

ꢚ1ꢅꢛ1

ꢂ1ꢃ

ꢍꢕꢗ4

ꢗ1ꢉ

ꢃꢈꢆ4

ꢂꢋꢇ4

ꢍꢕꢕ1

ꢑꢒꢐꢓꢔ

ꢂꢘꢄ4

ꢄꢃꢃ1

ꢜꢒꢝꢕꢖ

ꢕꢖꢎꢗꢘ

ꢞꢑꢏꢎꢓ

ꢒꢙꢓꢔ ꢕꢐꢚꢖꢘꢛ

ꢒꢋꢕꢖ ꢞꢝꢔꢑꢓꢟ

ꢊ

ꢄꢄ

ꢏ

ꢄ

ꢋꢇꢀ

ꢍꢕꢕꢓ

4ꢀ

ꢁ

ꢈꢩ

ꢁ

ꢅꢃꢇ

ꢃꢈꢈꢇ

1ꢅꢇꢋ 4ꢀ

ꢍꢓꢖ4

1ꢄꢃꢅ 4ꢈꢩ

ꢃꢇꢉ4

ꢗꢘꢍꢎꢏꢐꢒ ꢚꢓꢛꢘꢕ ꢢꢣꢈ ꢤꢃ4ꢀꢥꢄ4ꢆ6

ꢕꢎꢗꢖ ꢒꢙꢓꢔ ꢕꢐꢚꢖꢘꢛ ꢦꢢꢉ 1ꢌꢤ ꢧ4

ꢗꢎꢟꢖꢗꢘꢏꢎꢏꢟ ꢗꢙꢛꢨꢞꢘ ꢍꢐꢆꢇ 1ꢇꢅ ꢉꢍ

ꢎꢓꢊꢏꢍꢝꢒ ꢔꢕꢟꢓꢞ ꢢꢀꢣ ꢙꢇ4ꢈꢗꢚ4ꢛ6

ꢞꢏꢎꢑ ꢒꢋꢕꢖ ꢞꢝꢔꢑꢓꢟ ꢤꢢꢡ 1ꢃꢙ ꢥ4

ꢎꢏꢐꢑꢎꢓꢍꢏꢍꢐ ꢎꢋꢟꢠꢌꢓ ꢊꢝꢛꢄ 1ꢄꢅ ꢡꢊ

1ꢜꢇꢀ

ꢆꢃꢇ

ꢃꢈꢖ4

ꢓꢞꢛꢛꢘꢏꢗ ꢛꢐꢗꢎꢏꢟ

ꢎꢏ ꢠ

ꢍꢙꢞꢏꢗꢎꢏꢟ ꢖꢙꢒꢘꢚ

ꢍꢙ6ꢘ

ꢜꢇꢀ

ꢍꢕꢙ4

ꢍꢑꢒꢒꢓꢂꢏ ꢒꢎꢏꢁꢂꢔ

ꢁꢂ ꢕ

ꢊꢋꢌꢍꢎꢏꢍꢐ ꢑꢋꢒꢓꢔ

ꢂꢃꢄꢅ^{ꢆꢇꢄ1ꢈ}

ꢂꢌꢇꢅ^{ꢡꢃꢇ1ꢀ}

ꢍ1ꢏ6^{ꢚꢍꢖꢖ6}

ꢄ1ꢅ6^{ꢆꢄꢇꢇ6}

ꢋꢌꢍꢎꢏꢁꢌꢂ ꢐꢁꢂ

ꢃꢇꢋ

ꢍꢖꢕ1

ꢒꢙꢓꢐꢗꢎꢙꢏ ꢝꢎꢏ

ꢆꢃꢇ

ꢃꢈꢖ4

ꢛꢜ14

ꢍꢓꢓ1

6ꢃꢇ

ꢃꢄꢇ6

1ꢆꢃꢇ

ꢃꢖ6ꢅ

ꢀꢃꢁꢐꢑꢅꢄꢒꢒ 1ꢍꢓ ꢔ ꢕ ꢊꢊ

ꢍꢖꢓꢗ ꢔ ꢍ11ꢘ ꢁꢅꢍ

ꢎꢑꢏꢕꢖꢍꢓꢔꢔ 1ꢄꢈ ꢗ ꢃ ꢊꢊ

ꢄꢇꢈꢉ ꢗ ꢄ11ꢘ ꢏꢍꢄ

ꢝꢌꢛꢄ ꢕꢋꢍꢎꢝꢕꢎ ꢦꢕꢋꢍꢍꢓꢕꢎꢋꢟ ꢎꢋ

ꢧꢡ ꢃ1ꢈꢈꢗꢇ16 ꢚꢅꢇ1ꢘꢨ

Dimensions 483-G533-J1M1-B2S0ZN (MS 3320)

Mounting

ꢆꢇꢃꢈ^{ꢉꢊꢃ1ꢋ}

ꢃ1ꢈ6^{ꢉꢃꢊꢊ6}

tightening torque max. 4 Nm

7/16-32-UN-2A THD

ø10

.394

ø8.4

.331

ꢆ1ꢈꢃꢋ^ꢉꢊꢃꢈꢌꢍ1ꢈ ꢎꢂꢏ 1ꢋꢐꢇꢈꢑ ꢆ11ꢃꢋ^ꢉꢊꢃꢈꢌꢒꢐ16ꢑ

ꢃ4ꢄꢈ^{ꢉꢃꢊꢊꢅ}

ꢃ4ꢋꢇ^{ꢉꢃꢊꢊꢅ}

black

white

ꢗꢔꢁꢛꢟꢂꢕꢘꢘ 1ꢃꢋ ꢠ ꢇ ꢀꢀ

ꢃꢊꢋꢄ ꢠ ꢃ11ꢅ ꢁꢂꢃ

lock washer

ꢀꢁꢂꢃ ꢈꢊ

ꢀꢁꢂ ꢈꢋ ꢓꢔꢕꢂ ꢖꢁꢗꢗꢕꢏ ꢓꢁꢗꢔ ꢘꢙꢚꢎꢘꢔ ꢛꢜꢝꢕꢞ

ꢀꢁꢂꢃ ꢒꢅꢒ ꢀꢁꢂ ꢃꢄꢅ4

8.5

.335

5°

12.8 45°

.504

teminal screw MS 51957-41 (8-32 UNC-2A)

with lock washer MS 35338-137

tightening torque max. 1.7 Nm

max.19.8

max .780

9.5

current rating

in A

mounting holes

ø3.2^+0.15

.126^+.006

.374

0.8

.031

SW14

.551

location pin

thickness 1.5 - 3 mm

.059 - .118 in.

inch

This is a metric design and millimeter dimensions take precedence (

)

1646

www.e-t-a.de

High Performance Thermal Circuit Breaker 483-...

Other main terminal and threadneck designs

Typical time/current characteristics

Terminal design -J2

10000

1000

+125 °C

+ 257 °F

ꢀꢁꢂꢃꢄꢅꢆꢇ ꢈꢄꢉꢊꢆꢅꢋꢁꢉ ꢊꢌꢍ

ꢎꢏ 14 1ꢐꢑ ꢒꢆꢓ ꢔꢕ

ꢎꢏ 14 1ꢑꢖ ꢒꢆꢓ ꢔꢕ

ꢎꢏ ꢗꢗ ꢐꢘꢖ ꢒꢆꢕ

ꢎꢏ ꢗꢗ ꢐꢘ4 ꢒꢆꢕ

ꢎꢏ ꢗꢑ ꢗ44 ꢒꢆꢕ

ꢎꢏ ꢗꢑ ꢖꢘꢖ ꢒꢆꢓ ꢔꢕ

+ 23 °C

+ 73.4 °F

-55 °C

+67 °F

100

4ꢑꢙ

1ꢐꢚꢑ

ꢄ41ꢁ

ꢆ

ꢀ1ꢉ ꢂꢂꢃꢄꢊꢋꢌ ꢆꢇꢄꢈ

Terminal design -J3

0.1

ꢀꢁꢂꢃꢄꢅꢆꢇ ꢈꢄꢉꢊꢆꢅꢋꢁꢉ ꢊꢌꢍ

ꢎꢏ ꢗ6 ꢑꢘ4 ꢒꢆꢓ ꢔꢕ

0.01

0.001

6 810

40 6080100

… times rated current

ꢉꢄꢍ

ꢐ

4ꢍ

ꢏ

ꢄꢁꢁꢍ

Accessories

ꢀ1ꢍ ꢂꢂꢃꢄꢍꢌ1 ꢆꢇꢄꢈ

Mounting -G6

Splash cover/hex nut assembly with O ring ꢀꢁꢂ66 ꢅꢔꢋ ꢁꢂ6ꢕꢄ

ꢀꢅꢆꢆꢇꢈꢉꢊꢋ ꢌꢈ ꢍꢎ ꢏꢃꢐ4ꢃꢑ ꢒꢓꢐꢄ

X 200 801 08 nickel plated nut, transparent cover

ꢎꢔꢏꢕꢖ

ꢗꢘꢆꢙꢚ

X 200 801 03 matt black finish nut, black cover

X 200 801 09 matt black finish nut 7/16-32, black cover

X 200 801 12 with blackened nut and transparent cover

Accessories

ꢟ1ꢓꢠ1 ꢈꢇ

ꢕꢣ16ꢤꢐꢓ

Identification collar ꢀꢁ ꢂꢃ ꢄꢅꢆꢇꢇꢃꢈ ꢁꢅ ꢀꢉꢃ ꢇꢊꢄꢉ ꢂꢊꢀꢀꢁꢅ

Y 307 004 01 black

Y 307 004 02 white

Splash cover/hex nut assembly with O ring ꢀꢁꢂꢃ4ꢄ

ꢀꢅꢆꢆꢇꢈꢉꢊꢋ ꢌꢈ ꢍꢎ ꢏꢃꢐ4ꢃꢑ ꢒꢓꢐꢄ

Y 307 004 03 red

ꢌ14

ꢋꢎꢎ1

ꢌ6ꢋꢍꢎ

Y 307 004 04 green

X 200 802 01 nickel plated nut

Y 307 004 05 blue

X 200 802 02 matt black finish nut

ꢋꢏꢑꢒ

ꢟ1ꢓꢠ1

ꢌ1ꢏꢋꢐꢎ

ꢋ4ꢍ6

Actuator extension ꢀꢖꢗꢅꢘꢙꢄ ꢌꢈ ꢖꢊ ꢚꢛꢌꢌꢊꢋ ꢈꢔ ꢌꢜꢊ ꢆꢝꢞꢜ ꢖꢝꢌꢌꢈꢔ

ꢀꢅꢆꢆꢇꢈꢉꢊꢋ ꢌꢈ ꢍꢎ ꢏꢃꢐ4ꢃꢑ ꢒꢓꢐꢄ

X 200 803 01

ꢦꢓꢢ

ꢦꢡꢕꢥꢕ

ꢒꢋ6ꢎ

ꢋꢒꢏ6

Lock out ring ꢀꢁ ꢂꢓꢁꢔꢕ ꢀꢉꢃ ꢇꢊꢄꢉ ꢂꢊꢀꢀꢁꢅ ꢖꢅ ꢗꢘꢘ ꢇꢁꢄꢖꢀꢖꢁꢅ

Y 307 005 01 red

Y 307 005 02 black

ꢌ14ꢋ6

ꢋꢎꢑꢎ

ꢌ1ꢒꢋꢙ

ꢋ4ꢏꢙ

inch

This is a metric design and millimeter dimensions take precedence (

)

All dimensions without tolerances are for reference only. In the interest of improved design,

performance and cost effectiveness the right to make changes in these specifications

without notice is reserved.Product markings may not be exactly as the ordering codes.

Errors and omissions excepted.

ꢒꢋꢍ

ꢋꢒꢐ1

www.e-t-a.de

1646

483-G120-J2 [ETAL]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E