119-7275-XX [ETC]
TLA7000 Logic Analyzers; TLA7000逻辑分析仪
| 型号： | 119-7275-XX |
| 厂家： | 
ETC |
| 描述： | TLA7000 Logic Analyzers |
| 文件： | 总22页 (文件大小：1648K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TLA7000 Logic Analyzers
TLA7000 Series Data Sheet
Key features
68/102/136 channel logic analyzers with up to 512 Mb record length
Glitch and Setup/Hold triggering and display finds and displays elusive
hardware problems
Transitional storage extends the signal analysis capture time for signals
that transition infrequently
Simultaneous state, high-speed timing, and analog analysis through
the same probe pinpoints elusive faults
Trace problems from symptom back to root cause in real time across
multiple modules by viewing time-correlated data in a wide variety of
display formats
Comprehensive PCI Express probing solutions, including midbus, slot
interposer, and solder-down connectors
Modular mainframes provide flexibility and expandability
Broad processor and bus support
The modular TLA7000 logic analyzer series provides the speed and
flexibility you need to capture logic detail on today's fastest designs.
Pinpoint the source of elusive errors and gain the visibility you want with
large easy-to-read displays, fast data throughput, and time-correlated views
of analog and digital signals through the same probe.
Applications
MIPI protocol analysis
DDR2 and DDR3 debug and verification
Signal integrity
Key performance
™
PCI Express debug from Protocol layer to Physical layer
Silicon validation
MagniVu acquisition technology provides up to 20 ps (50 GHz) timing
resolution to find and measure elusive timing problems quickly
Computer system validation
Up to 156 ps (6.4 GHz)/512 Mb Record length timing analysis
Embedded system debug and validation
Up to 1.4 GHz Clock with up to 3.0 Gb/s Data with a Data Valid window
of 180 ps for state acquisition analysis of high-performance
synchronous buses
Processor/Bus debug and verification
Embedded software integration, debug, and verification
®
D-Max probing system with 0.5 pF capacitive loading eliminates need
for on-board connectors, minimizes intrusion on circuits, and is Ideal for
differential signal applications
PCI Express Gen1 through Gen3 including Gen3 Protocol to physical
layer analysis for link widths from x1 through x16 with up to 8.0 GT/s
acquisition rates and up to 16 GB deep memory (for x16 link)
www.tektronix.com
1
Datasheet
Breakthrough solutions for real-time digital
systems analysis
To complement the high-performance logic analyzer modules, the
TLA7ACx Series logic analyzer modules offer all the same debug and
verification functionality, but with performance levels more suited to the
embedded designer. The TLA7ACx modules offer high-speed state
synchronous capture, high-speed timing capture, and analog capture
through the same set of probes. MagniVu technology offering up to 125 ps
timing on all channels, glitch and setup/hold triggering, and display and
time stamp that is always on at 125 ps resolution is available as standard
on all models.
Tektronix provides breakthrough digital systems analysis tools that enable
digital hardware and software designers to capture and analyze the source
of elusive problems that threaten product development schedules. The
TLA7000 Series provides the speed you need to capture the source of
those elusive problems, plus the visibility you want with large displays and
fast system data throughput, while protecting your investment with
compatibility with all TLA modules.
Module
Timing resolution State speed
Memory
TLA7ACx
TLA7BBx
125 ps (8 GHz)
20 ps (50 GHz)
Up to 800 MHz
Up to 1.4 GHz
Up to 128 Mb
Up to 64 Mb
TLA7012 and TLA7016 mainframes
The TLA7012 Portable and TLA7016 Benchtop mainframes are modular
mainframes that accept TLA logic analyzer and pattern generator modules.
The TLA7012 and TLA7016 can be configured as either master or
expansion mainframes to provide solutions for large numbers of buses and
high channel-count requirements.
P6800 and P6900 series probes
With the industry's lowest capacitance, the P6800 and P6900 Series logic
analyzer probes protect the integrity of your signal - critical for connecting
to fast buses like DDR2 and DDR3 where low intrusion is key to the proper
operation of your design. Select from single-ended and differential probes
and a variety of attachment mechanisms, including the "connectorless"
compression connection that eliminates the need for onboard connectors.
The TLA7012 Portable Mainframe offers a familiar work environment for the
TLA application software. It provides multiple display capability for
extended desktop viewing, in addition to an internal DVD-RW, hard drive,
and multiple USB ports for expansion. A replaceable hard drive is standard,
ideal for security or enabling individual team members to store personal
setups and data. Trigger in/out connections provide an interface to other
external instrumentation, such as Tektronix oscilloscopes, for correlating
measurement results.
For applications where circuit board space is at a premium, the high-density
P6900 Series with D-Max® Probing Technology offers the industry's
smallest available footprint. For debugging the signal integrity glitches
common on fast buses, the P6900 Series works with the TLA7BBx and
™
TLA7ACx modules and their iLink Tool Set capability to provide
™
TLA7ACx and TLA7BBx modules
iCapture simultaneous digital-analog acquisition. This allows you to
clearly see the time-correlated digital and analog behavior of your design,
without the extra capacitance and setup time of double-probing.
Today's digital design engineers face daily pressures to speed new
products to the marketplace. The TLA7ACx and TLA7BBx Series logic
analyzer modules answer the need with breakthrough solutions for the
entire design team, providing the ability to quickly monitor, capture, and
analyze real-time digital system operation to debug, verify, optimize, and
validate digital systems. Hardware developers, hardware/software
integrators, and embedded software developers will appreciate the range of
capabilities of the TLA7ACx and TLA7BBx Series logic analyzer modules.
Its broad feature set includes capturing and correlating elusive hardware
and software faults; providing simultaneous state, high-speed timing, and
analog analysis through the same probe; using deep state acquisition to
find the cause of complex problems; real-time, nonintrusive software
execution tracing that correlates to source code and to hardware events;
and nonintrusive connectorless probing.
For differential signaling applications where signal integrity is critical, the
high-fidelity P6980 and P6982 are perfect for those applications where
noise performance is critical. In addition, the P6980 and P6982 can support
the small voltage swings that differential signaling often requires. The
P6962DBL, when used with a TLA7000 Series logic analyzer with the
TLA7BBx module, supports digital validation and debug of DDR3 memory
with data rates up to 1600 mega-transfers per second. For board designs
that do not include high-density probe footprints, the P6960 with its
companion flying leadset provides the flexibility required to meet many
different debug needs.
™
The TLA7BBx Series logic analyzer modules offer breakthrough MagniVu
technology by Tektronix for providing high-speed sampling (up to 50 GHz)
that dramatically changes the way logic analyzers work and enables new
measurement capabilities. The TLA7BBx modules offer high-speed state
synchronous capture, high-speed timing capture, and analog capture
through the same set of probes. They capitalize on MagniVu technology to
offer up to 20 ps timing on all channels, glitch and setup/hold triggering,
and display and time stamp that is always on at up to 20 ps resolution.
2 www.tektronix.com
Tektronix Logic Analyzers – TLA7000 Series
AutoDeskew and Customer Deskew fixture
Reduce your time to information by viewing and searching up to 16 GB
deep memory in just seconds with rapid display updates enabled by our
industry-leading hardware acceleration. With improved information density
you can then quickly ascertain the health of the system and identify
patterns of interest (errors, specific transactions, ordered sets, etc.) with
statistics using the Summary Profile window. Protocol behavior can be
viewed at the packet and transaction level interspersed with physical layer
activity in a single innovative Transaction window. Further insight into
physical layer details can be gained with the unique Listing window
showing packet details at the symbol level by lane and you can view
individual lane activity correlated with analog waveforms from your high-
bandwidth oscilloscope in the Waveform window.
Tektronix recommends AutoDeskew, a standard feature available within the
TLA application, for deskewing probe channels and setting the sample
point for synchronous applications. However, for tight time alignment in
both synchronous and asynchronous applications (including MagniVu),
Tektronix recommends the Customer Deskew fixture. This is an optional
accessory to the TLA7BBx modules that is used to perform a channel-to-
channel deskew of the probes connected to the TLA7BBx module to ensure
tight time alignment between all channels across all probes. Two different
fixtures are available:
Customer Deskew fixture for P6800 series probes
Customer Deskew fixture for P6900 series probes
Hardware developers, hardware/software integrators, and embedded
system designers will appreciate the tight integration with the Tektronix
Logic Analyzer. This provides visibility of complete system interactions with
time-correlated, multibus analysis on a single display. Cross triggering and
a common global time stamp enables accurate and efficient debugging by
showing exactly what was happening on one bus relative to another at any
given instant of time. Coupled with the P67SA00 Series probing solutions,
engineers have flexible options for platform accessibility.
Refer to the TLASA00 Series Datasheet (52W-25691-xx) for additional
information on the Tektronix PCI Express Logic Protocol Analyzer modules.
P67SA00 series probes for PCI Express
The P67SA00 series probes provide validation engineers with a
comprehensive set of PCI Express probing solutions, including midbus, slot
interposer, and solder-down connectors. With support for PCI Express
Gen3 channel lengths up to 24 in. With two connectors, these probes offer
minimal electrical loading with the highest signal fidelity and active
equalization to ensure accurate data recovery of closed eyes. All P67SA00
series probes feature a graphical lane swizzling capability for maximum
flexibility to accommodate unique circuit board layouts.
For ordering details, please see the Ordering information section.
TLA7SAxx PCI Express logic protocol
analyzer modules
PCI Express 3.0 introduces new challenges for validation engineers. Time-
to-market pressures require a solution that can quickly pinpoint problems.
The TLA7SAxx Series logic protocol analyzer modules provide an
innovative approach to PCI Express validation that spans all layers of the
protocol from the physical layer to the transaction layer.
www.tektronix.com
3
Datasheet
TLA7012 and TLA7016 Mainframe specifications
General characteristics
Instrument slots
TLA7012
TLA7016
Holds two TLA modules
Holds six TLA modules
Expansion capability
The TLA7000 Series mainframes can be used as either master or expansion mainframes (TL708EX 8-port Instrument Hub and
Expander is required for 3-8 mainframes connected together using TekLink cable)
™
TLA7012
TLA7016
Up to eight TLA7012 mainframes can be used, providing support for up to 16 TLA modules (2,176 channels)
Up to eight TLA7016 mainframes can be used, providing support for up to 48 TLA modules (6,528 channels)
TLA7012 PC specifications
Operating system
Microsoft® Windows® XP Professional and Multilingual User Interface Pack
2 GHz Intel® Pentium® M-760
Processor
Chipset
Intel® 915GM
Memory
1 GB DDR PC 533 MHz (SODIMM), expandable to 2 GB DDR memory
Line In and Mic Out connectors
Sound
Removable hard drive
Optical drive
3.5 in., ≥80 GB Serial ATA, 7200 RPM
Internal 4.7 GB DVD±R/RW
External display port type
External display resolution
Network port
USB port
One (1) DVI-D (primary - digital only) and one (1) DVI-I (secondary - digital and analog) connectors
Up to 1600 × 1200 noninterlaced at 32-bit color, each for both primary and secondary displays
One (1) 10/100/1000 LAN with RJ-45 connector
Seven (7); three (3) in front and four (4) in rear
TLA7012 integral controls
Front panel display
Size: 15 in. (38.1 cm) diagonal
Type: Active-matrix color TFT LCD with backlight
ion: 1024×768
Simultaneous display capability
Front panel
Both the front-panel and one external display can be used simultaneously at 1024 × 768 resolution
General-purpose knob with dedicated hotkeys and knobs for horizontal and vertical scaling and scrolling
Available with Option 18
Touchscreen
4 www.tektronix.com
Tektronix Logic Analyzers – TLA7000 Series
™
Integrated View (iView ) capability
™
TLA mainframe configuration
requirements
GPIB-iView (Opt. 1C)
™
USB-iView (Opt. 2C)
Number of Tektronix oscilloscopes
that can be connected to a TLA
system
1
External oscilloscopes supported More than 100. For a complete listing of current supported oscilloscopes, please visit our website http://www.tektronix.com/iview.
TLA connections
USB, Trigger In, Trigger Out, Clock Out
Oscilloscope connections
™
GPIB-iView (Opt. 1C)
GPIB, Trigger In, Trigger Out, Clock In (when available)
USB Device Port, Trigger In, Trigger Out
™
USB-iView (Opt. 2C)
™
Setup
iView external oscilloscope wizard automates setup.
Data correlation
After oscilloscope acquisition is complete, the data is automatically transferred to the TLA and time correlated with the TLA
acquisition data.
™
Deskew
The oscilloscope and TLA data is automatically deskewed and time correlated when using the iView external oscilloscope cable.
™
GPIB-iView (Opt. 1C) External
2 m (6.6 ft.)
2 m (6 ft.)
oscilloscope cable length
™
USB-iView (Opt. 2C) External
oscilloscope cable length
Symbolic support
Number of symbols/ranges
Unlimited (limited only by amount of virtual memory available on TLA)
Object file formats supported
IEEE695, OMF 51, OMF 86, OMF 166, OMF 286, OMF 386, COFF, Elf/Dwarf 1 and 2, Elf/Stabs, TSF (If your software
development tools do not generate output in one of the above formats, TSF, or the Tektronix symbol file, a generic ASCII file
format is supported. The generic ASCII file format is documented in the TLA online help). If a format is not listed, please contact
your local Tektronix representative.
External instrumentation interface
System Trigger output
System Trigger input
External Signal output
External Signal input
Asserted whenever a system trigger occurs (TTL-compatible output, back-terminated into 50 Ω)
Forces a system trigger when asserted (adjustable threshold between 0.5 V and 1.5 V, edge sensitive, falling-edge latched)
Can be used to drive external circuitry from a module's trigger mechanism (TTL-compatible output, back-terminated into 50 Ω)
Can be used to provide an external signal to arm or trigger any or all modules (adjustable threshold between 0.5 V and 1.5 V, level
sensitive)
www.tektronix.com
5
Datasheet
Power
Power
Voltage range/frequency
90-250 V AC at 45-66 Hz
100-132 V AC at 360-440 Hz
7 A maximum at 90 V AC (70 A surge)
750 W maximum
Input current
Power consumption
TLA7016 Voltage range/frequency Ratings apply to mainframes with serial numbers B020000 and higher.
Configuration A, Maximum
load 1000 W
100 VRMS to 120 VRMS, 50 Hz to 60 Hz and 115RMS, 400 Hz, 1450 W maximum
Configuration B, Maximum
load 1000 W
120 VRMS to 240 VRMS, 50 Hz to 60 Hz, 1900 W maximum
TL708EX
Voltage range/frequency
Input current
100-240 V AC at 50-60 Hz
2 A maximum at 100 V AC
200 W maximum
Power consumption
Environmental
Temperature
Operating
+5 °C to +45 °C
-20 °C to +60 °C
Nonoperating
Humidity
Operating
Nonoperating
20% to 80%
≤30 °C; 80% relative humidity (29 °C maximum wet-bulb temperature)
8% to 80% (29 °C maximum wet-bulb temperature)
Altitude
Safety
Operating: -1,000 ft. to 10,000 ft. (-305 meters to 3,050 meters)
UL3111-1, CSA1010.1, EN61010-1, IEC61010-1
TLA7012 Portable Mainframe physical specifications
Dimensions
Height
Width
Depth
295 mm (11.6 in.)
451 mm (17.75 in.)
460 mm (18.1 in.)
Weight
Net (without modules)
Shipping (typical)
14 kg (30 lb.)
27 kg (59 lb.)
6 www.tektronix.com
Tektronix Logic Analyzers – TLA7000 Series
TLA7016 Benchtop Mainframe physical specifications
Dimensions
Height
Width
Depth
350 mm (13.7 in.)
425 mm (16.7 in.)
673 mm (26.5 in.)
Weight
Net (without modules)
Shipping (typical
25 kg (55 lb.)
51.8 kg (115 lb.)
TLA708EX 8-port instrument Hub and expander physical specifications
Dimensions
Height
Width
Depth
51 mm (2.0 in.)
455 mm (17.5 in.)
305 mm (12.0 in.)
Weight
Net
3 kg (6 lb.)
Shipping
5 kg (11 lb.)
TLA7ACx logic analyzer module specifications
Specifications apply to all TLA7ACx models unless noted otherwise.
General specifications
Number of channels
TLA7AC2
All channels are acquired including clocks
68 channels (4 are clock channels)
TLA7AC3
102 channels (4 are clock and 2 are qualifier channels)
136 channels (4 are clock and 4 are qualifier channels)
TLA7AC4
Channel grouping
No limit to number of groups or number of channels per group (all channels can be reused in multiple groups)
Module merging
Up to five 102-channel or 136-channel modules can be "merged" to make up to a 680-channel module. Merged modules exhibit
the same depth as the lesser of the five individual modules.
Word/setup-and-hold/glitch/transition recognizers span all five modules. Range recognizers limited to three-module merge. Only
one set of clock connections is required.
Time stamp
51 bits at 125 ps resolution (3.25 days duration)
Clocking/Acquisition modes
Asynchronous and synchronous 8 GHz MagniVu high-speed timing is available simultaneous with all modes.
2
Number of mainframe instrument
slots required per TLA series
module
www.tektronix.com
7
Datasheet
Data input with P6800 or P6900 series probes
Capacitive loading
P6900 series
P6800 series
0.5 pF clock/data
<0.7 pF clock/data
P6810 (In group configuration) 1.0 pF
Threshold selection range
From -2.0 V to +4.5 V in 5 mV increments
Threshold presets include TTL (1.5 V), CMOS (1.65 V), ECL (-1.3 V), PECL (3.7 V), LVPECL (2.0 V), LVCMOS 1.5 V (0.75 V),
LVCMOS 1.8 V (0.9 V), LVCMOS 2.5 V (1.25 V), LVCMOS 3.3 V (1.65 V), LVDS (0 V), and user defined.
Threshold selection channel
granularity
Separate selection for each of the clock/qualifier channels and one per group of 16 data channels for each 34-channel probe.
±(35 mV + 1%)
Threshold accuracy (including
probe)
Input voltage range
Operating
2.5 V to 5.0 V
±15 V
Nondestructive
Minimum Input Signal Swing
Single-ended
300 mV
Differential
VMAX – VMIN > 150 mV
Input signal minimum slew rate
200 mV/ns typical
8 www.tektronix.com
Tektronix Logic Analyzers – TLA7000 Series
State acquisition with P6800 or P6900 series probes
Channel configurations
Full channel
235 MHz
Half channel
0 MHz / 450 Mb/s or 470 Mb/s (DDR)
800 MHz / 800 Mb/s or 900 Mb/s (DDR) 625 MHz / 1.25 Gb/s
Quarter channel
450 MHz / 900 Mb/s
450 MHz Optional
State record length with Time
stamps
(Quarter/Half/Full channels) 8/4/2 Mb, 32/16/8 Mb, 128/64/32 Mb, 512/256/128 Mb per channel
Setup and Hold time selection
range
From 16 ns before, to 8 ns after clock edge in 125 ps increments. Range may be shifted towards the setup region by 0 ns [+8, -8]
ns, 4 ns [+12, -4] ns, or 8 ns [+16, 0] ns
Setup and Hold window
All channels
625 ps typical
500 ps typical
Single channel
Minimum clock pulse width
Active clock pulse separation
Demux channel selection
500 ps (P6960, P6962, P6964, P6980, P6982, P6860), 700 ps (P6910)
400 ps
Channels can be demultiplexed to other channels through user interface with 8-channel granularity.
Up to four "Fast Latches" per module (20 max per 5-way merge) to strobe source-synchronous buses into TLA7ACx modules.
Source synchronous clocking
Four sets of any predefined "Fast Latches" may be combined with qualification data and data pipelining to store four independent
source-synchronous data buses.
Two "Fast Latches" may be combined to address DDR applications.
Timing acquisition (with P6800 or P6900 probes)
™
MagniVu timing
125 ps max, adjustments to 250 ps, 500 ps, 1 ns, and 2 ns
MagniVu timing record length
16 Kb per channel, with adjustable trigger position
500 ps / 1 ns / 2 ns to 50 ms
Deep timing resolution (Quarter/
Half/Full channels)
Deep timing resolution with glitch 4 ns to 50 ms
storage enabled
Deep timing record length
(Quarter/Half/Full channels with time stamps and with or without transitional storage)
8/4/2 Mb, 32/16/8 Mb,128/64/32 Mb, 512/256/128 Mb per channel
Deep timing record length with
glitch storage enabled
Half of default main memory depth
Channel-to-channel skew
300 ps typical
Minimum recognizable pulse/glitch 500 ps (P6960, P6962, P6964, P6980, P6982, P6860), 750 ps (P6910)
width (single channel)
Minimum detectable Setup/Hold
violation
250 ps
Minimum recognizable
Sample period + channel-to-channel skew
multichannel Trigger event
www.tektronix.com
9
Datasheet
Analog acquisition (with P6800 or P6900 probes)
Bandwidth
2 GHz typical
Attenuation
10X, ±1%
Offset and gain (Accuracy)
Channels demultiplexed
Run/Stop requirements
±50 mV, ±2% of signal amplitude
4
None, analog outputs are always active
Compatible with any supported Tektronix oscilloscope
™
iCapture Analog outputs
iCapture Analog output BNC cable Low loss, 10X, 36 in. Basic Analog multiplexer functionality is offered standard on all TLA7ACx modules. This routes 4 fixed
channels to the iCapture Analog output BNCs. The outputs cannot be switched to other logic analyzer channels. Option AM
enables full analog multiplexer control and allows the routing of any 4 logic analyzer channels to the iCapture Analog output BNCs.
Trigger system
Independent Trigger states
16
16
Maximum idependent If/Then
clauses per state
Maximum numger of events per If/
Then clause
8
Maximum number of actions per If/
Then clause
8
Maximum number of Trigger
events
18 (2 counters/timers plus any 16 other resources)
Number of word recognizers
Number of transition recognizers
Number of range recognizers
Number of counters/timers
Trigger event types
16
16
4
Word, Group, Channel, Transition, Range, Anything, Counter Value, Timer Value, Signal, Glitch, Setup-and-Hold Violation,
Snapshot
Trigger action types
Trigger Module, Trigger All Modules, Trigger Main, Trigger MagniVu, Store, Don't Store, Store Sample, Increment Counter,
Decrement Counter, Reset Counter, Start Timer, Stop Timer, Reset Timer, Snapshot Current Sample, Goto State, Set/Clear
Signal, Do Nothing
Maximum triggerable data rate
Trigger sequence rate
Counter/timer range
Counter rate
1250 Mb/s (4X clocking mode)
DC to 500 MHz (2 ns)
51 bits each (>50 days at 2 ns)
DC to 500 MHz (2 ns)
Timer clock rate
500 MHz (2 ns)
10 www.tektronix.com
Tektronix Logic Analyzers – TLA7000 Series
Trigger system
Counter/timer latency
2 ns
Range recognizers
Double bounded (408 channel maximum). Can be as wide as any group, must be grouped according to specified order of
significance.
Setup and Hold violation
recognizer
Setup time range
From 8 ns before to 7 ns after clock edge in 125 ps increments. This range may be shifted towards the positive region by 0 ns,
4 ns, or 8 ns.
Hold time range
From 7 ns before to 8 ns after clock edge in 125 ps increments. This range may be shifted towards the positive region by 0 ns [+8,
-8] ns, 4 ns [+12, -4] ns, or 8 ns [+16, 0] ns.
Trigger position
Any data sample
MagniVu trigger postion
MagniVu position can be set from 0% to 60% centered around the MagniVu trigger
Storage control (data qualification) Global (conditional), by state (start/stop), block, by trigger action, or transitional. Also force main prefill selection available.
Physical characteristics
Dimensions
Height
Width
Depth
262 mm (10.3 in.)
61 mm (2.4 in.)
381 mm (15.0 in.)
Weight
Net
3.1 kg (6.7 lb.)
6.3 kg (13.7 lb.)
Shipping
www.tektronix.com 11
Datasheet
TLA7BBx logic analyzer module specifications
Specifications apply to all TLA7BBx models unless noted otherwise.
General specifications
Number of channels
TLA7BB2
All channels are acquired including clocks
68 channels (4 are clock channels)
TLA7BB3
102 channels (4 are clock and 2 are qualifier channels)
136 channels (4 are clock and 4 are qualifier channels)
No limit to number of groups or number of channels per group (all channels can be reused in multiple groups)
TLA7BB4
Channel grouping
Module merging
Up to five 68-channel, 102-channel, or 136-channel modules can be "merged" to make up to a 680-channel module. Merged
modules exhibit the same depth as the lesser of the five individual modules.
Word/setup-and-hold/glitch/transition recognizers span all five modules. Range recognizers limited to three-module merge. Only
one set of clock connections is required.
Time stamp
54 bits at 20 ps resolution (>4 days duration)
Clocking/Acquisition modes
Asynchronous and synchronous. 20 ps (50 GHz) MagniVu high-speed timing is available simultaneous with all modes
2
Number of mainframe instrument
slots required per TLA series
module
Data input with P6800 or P6900 series probes
Capacitive loading
P6900 series
P6800 series
0.5 pF clock/data
<0.7 pF clock/data
P6810 (In group configuration) 1.0 pF
Threshold selection range
From -2.0 V to +4.5 V in 5 mV increments
Threshold presets include TTL (1.5 V), CMOS (1.65 V), ECL (-1.3 V), PECL (3.7 V), LVPECL (2.0 V), LVCMOS 1.5 V (0.75 V),
LVCMOS 1.8 V (0.9 V), LVCMOS 2.5 V (1.25 V), LVCMOS 3.3 V (1.65 V), LVDS (0 V), and user defined.
Threshold selection channel
granularity
Separate selection for each of the clock/qualifier and individual channels.
±(35 mV + 1%)
Threshold accuracy (including
probe)
Input voltage range
Operating
2.5 V to 5.0 V
±15 V
Nondestructive
Minimum Input Signal Swing
Single-ended
200 mV
Differential
VMAX – VMIN > 100 mV
Input signal minimum slew rate
200 mV/ns typical
12 www.tektronix.com
Tektronix Logic Analyzers – TLA7000 Series
State acquisition with P6800 or P6900 series probes
Channel configurations
Configuration
Full channel
Half channel
750 MHz Standard
750 MHz / 750 Mb/s (1 sample/clock)
750 MHz / 1.5 Gb/s (2 samples/clock)
750 MHz / 3 Gb/s (4 samples/clock)
1.4 GHz Optional
1.4 GHz / 1.4 Gb/s (1 sample/clock)
1.4 GHz / 2.8 Gb/s (2 samples/clock)
State record length with Time
stamps
(Quarter/Half/Full channels) 4/2 Mb, 8/4 Mb, 16/8 Mb, 32/16 Mb, 64/32 Mb, 128/64 Mb per channel
Setup and Hold time selection
range
From 15 ns before, to 7.5 ns after clock edge in 20 ps increments. Range may be shifted towards the setup region by 0 ns [+7.5,
-7.5] ns, 2.5 ns [+10, -5] ns, or 7.5 ns [+15, 0] ns.
Setup and Hold window, single
channel
180 ps typical
Minimum clock pulse width
Demux channel selection
200 ps (P6960, P6962, P6964, P6980, P6982, P6860), 250 ps (P6910)
Channels can be demultiplexed to other channels through user interface with 8-channel granularity.
Timing acquisition (with P6800 or P6900 probes)
™
MagniVu timing
20 ps max, adjustments to 40 ps, 80 ps, 160 ps, 320 ps, and 640 ps
MagniVu timing record length
Deep timing resolution
128 Kb per channel, with adjustable trigger position
(Quarter/Half/Full channels)
1.25 ps / 312.5 ps / 625 ps to 50 ms
Deep timing resolution with glitch 1.25 ns to 50 ms
storage enabled
Deep timing record length
(Quarter/Half/Full channels)
8/4/2 Mb, 16/8/4 Mb, 32/16/8 Mb, 64/32/16 Mb, 128/64/32 Mb, 256/128/64 Mb per channel
Deep timing record length with
glitch storage enabled
Half of default main memory depth
Channel-to-channel skew
Before customer deskew
After customer deskew
(Module + probe)
±80 ps typical
±20 ps typical
Minimum recognizable pulse/glitch 200 ps (P6960, P6962, P6964, P6980, P6982, P6860)
width (single channel)
250 ps (P6910)
Minimum detectable Setup/Hold
violation
40 ps
Minimum recognizable
Sample period + channel-to-channel skew
multichannel Trigger event
www.tektronix.com 13
Datasheet
Analog acquisition (with P6800 or P6900 probes)
Bandwidth
3 HGz typical
Attenuation
10X, ±1%
Offset and gain (Accuracy)
Channels demultiplexed
Run/Stop requirements
±50 mV, ±2% of signal amplitude
4
None, analog outputs are always active
Compatible with any supported Tektronix oscilloscope
Four (4) low loss, 10X, 36 in.
™
iCapture Analog outputs
iCapture Analog output BNC
cables
Trigger system
Independent Trigger states
16
16
Maximum idependent If/Then
clauses per state
Maximum numger of events per If/
Then clause
8
Maximum number of actions per If/
Then clause
8
Maximum number of Trigger
events
26 (2 counters/timers plus any 24 other resources)
Number of word recognizers
Number of transition recognizers
Number of range recognizers
Number of counters/timers
Trigger event types
24
24
8
Word, Group, Channel, Transition, Range, Anything, Counter Value, Timer Value, Signal, Glitch, Setup-and-Hold Violation,
Snapshot
Trigger action types
Trigger Module, Trigger All Modules, Trigger Main, Trigger MagniVu, Store, Don't Store, Store Sample, Increment Counter,
Decrement Counter, Reset Counter, Start Timer, Stop Timer, Reset Timer, Snapshot Current Sample, Goto State, Set/Clear
Signal, Do Nothing
Maximum triggerable data rate
Trigger machine sequence rate
Counter/timer range
Counter rate
3.0 Gb/s
DC to 800 MHz (1.25 ns)
48 bits each (~4 days at 1.25 ns)
DC to 800 MHz (1.25 ns)
800 MHz (1.25 ns)
Timer clock rate
14 www.tektronix.com
Tektronix Logic Analyzers – TLA7000 Series
Trigger system
Counter/timer test latency
0 ns
Range recognizers
Double bounded (408 channel maximum). Can be as wide as any group, must be grouped according to specified order of
significance.
Setup-and-hold violation
recognizer setup time range
From 7.5 ns before, to 7.5 ns after clock edge in 20 ps increments. This range may be shifted toward the positive region by 0 ns,
2.5 ns, 5 ns, or 7.5 ns.
Setup-and-hold violation
recognizer hold time range
From 7.5 ns before, to 7.5 ns after clock edge in 20 ps increments. This range may be shifted toward the positive region by 0 ns,
2.5 ns, 5 ns, or 7.5 ns.
Trigger position
Any data sample
MagniVu trigger postion
MagniVu position can be set from 0% to 60% centered around the MagniVu trigger
Storage control (data qualification) Global (conditional), by state (start/stop), block, by trigger action, or transitional. Also force main prefill selection available.
Physical characteristics
Dimensions
Height
Width
Depth
262 mm (10.3 in.)
61 mm (2.4 in.)
381 mm (15.0 in.)
Weight
Net
3.1 kg (6.7 lb.)
6.3 kg (13.7 lb.)
Shipping
Ordering information
TLA7012 standard accessories
TLA7012 Portable Logic Analyzer Mainframe, holds two TLA modules.
Part number
119-7275-xx
119-7054-xx
200-4939-xx
333-4206-xx
063-3881-xx
-
Description
Mini keyboard
Optical wheel mouse
Front-panel cover
One dual-wide panel filler for empty slots
TLA application software CD
Certificate of traceable calibration
Please specify power cord, language, and service options when ordering.
www.tektronix.com 15
Datasheet
TLA7012 Options
Option
Opt. 18
Opt. 1C
Description
Order number
Add touch screen
N/A
™
Add GPIB-iView external oscilloscope interface kit (requires 012-1614-xx
TLA Application SW V5.0 or greater)
Opt. 2C
Add USB-iView external oscilloscope interface kit (requires TLA N/A
Application SW V5.8 or greater)
Opt. PO
Opt. TL
Opt. 1K
Opt. 88
Add Accessory Pouch for TLA7012
Add Teklink Cable
016-1441-xx
174-5019-xx
LACART
N/A
Add LACART logic analyzer cart
Factory install of module
TLA7012 recommended accessories
Accessory
650-4815-xx
020-2664-xx
016-1522-xx
Description
Additional removable hard drive assembly (no SW)
Rackmount kit
Wheeled transport case
TLA7016 standard accessories
TLA7016 Benchtop Logic Analyzer Mainframe, holds six TLA modules.
Part number
333-4206-xx
174-5225-xx
063-3671-xx
-
Description
Five (5) dual-wide panel fillers for empty slots
LAN cable, straight-through, RJ-45
TLA application software CD
Certificate of traceable calibration
Please specify power cord, language, and service options when ordering.
TLA7016 Options
Option
Description
Order number
™
Opt. 1C
Add GPIB-iView external oscilloscope interface kit (requires 012-1614-xx
TLA Application SW V5.0 or greater)
Opt. 2C
Add USB-iView external oscilloscope interface kit (requires TLA N/A
Application SW V5.8 or greater)
Opt. TL
Add Teklink Cable
174-5019-xx
Opt. BTB
Add benchtop system mounting brackets
407-5127-xx (Left)
407-5132-xx (Right)
Opt. 1K
Opt. 88
Add K4000 logic analyzer cart
Factory install of module
K4000
N/A
16 www.tektronix.com
Tektronix Logic Analyzers – TLA7000 Series
TLA7016 recommended accessories
Accessory
020-2369-xx
016-1651-xx
Description
Rackmount kit
Wheeled transport case
™
TL708EX
TekLink 8-port Instrument Hub and Expander (Used for connecting 3-to-8 TLA7012 or TLA7016 mainframes).
Includes: Instruction sheet (071-1765-xx, English only).
Please specify power cord and service options when ordering.
TLA 7000 series options
TLA7000 series power cord options
Opt. A0
Opt. A1
Opt. A2
Opt. A3
Opt. A4
Opt. A5
Opt. A6
Opt. A10
Opt. A11
Opt. A12
Opt. A99
North America power plug (115 V, 60 Hz)
Universal Euro power plug (220 V, 50 Hz)
United Kingdom power plug (240 V, 50 Hz)
Australia power plug (240 V, 50 Hz)
North America power plug (240 V, 50 Hz)
Switzerland power plug (220 V, 50 Hz)
Japan power plug (100 V, 110/120 V, 60 Hz)
China power plug (50 Hz)
India power plug (50 Hz)
Brazil power plug (60 Hz)
No power cord
Language options
Opt. L0
English manual
Japanese manual
Russian manual
No manual
Opt. L5
Opt. L10
Opt. L99
Installation options
LAINSTAL-SM
Installation of single mainframe and up to 3 modules or 1 to 3 modules in existing mainframe.
Installation of single mainframe and 4 to 6 modules.
LAINSTAL-LG
www.tektronix.com 17
Datasheet
Gigabit LAN (GbE) switch
020-2666-xx
16-port Gigabit LAN (GbE) switch with U.S. standard (120 V, 60 Hz) power cord
Power cords for Gigabit (GbE) switch
161-0066-00
Power cord, IEC320 C13, North American, straight
161-0066-09
Power cord, IEC320 C13, Universal Euro, straight
Power cord, IEC320 C13, Universal Euro, straight
Power cord, IEC320 C13, Australian, straight
Power cord, IEC320 C13, North American, straight
Power cord, IEC320 C13, Switzerland, straight
Power cord, IEC320 C13, Japan, straight
161-0066-10
161-0066-11
161-0066-12
161-0154-00
161-0298-00
161-0304-00
Power cord, IEC320 C13, China, straight
TLA7000 series upgrades
Add new capabilities to your existing TLA mainframe or increase the state speed, memory depth, or add full analog multiplexer
capability (TLA7ACx only) to existing TLA modules by ordering the appropriate upgrade kit. Please refer to the TLA Family
Upgrade Guide for further details.
TLA7ACx logic analyzer modules
TLA7ACx modules
Includes: Certificate of calibration, and one-year warranty (return to Tektronix).
Probes must be ordered separately.
TLA7AC2
TLA7AC3
TLA7AC4
68-channel Logic Analyzer module, 8 GHz timing, 235 MHz state, 2 Mb record length. Options for up to 128 Mb record length and/
or up to 450 MHz state.
102-channel Logic Analyzer module, 8 GHz timing, 235 MHz state, 2 Mb record length. Options for up to 128 Mb record length
and/or up to 450 MHz state.
136-channel Logic Analyzer module, 8 GHz timing, 235 MHz state, 2 Mb record length. Options for up to 128 Mb record length
and/or up to 450 MHz state.
TLA7ACx module options
Base configuration is 2 Mb record length at 235 MHz state with basic Analog Multiplexer capability.
Opt 1S
Opt 2S
Opt 3S
Opt 4S
Opt 5S
Opt 6S
Opt 7S
Opt AM
Opt. 88
Increase to 8 Mb record length at 235 MHz state
Increase to 32 Mb record length at 235 MHz state
Increase to 128 Mb record length at 235 MHz state
Increase to 2 Mb record length at 450 MHz state
Increase to 8 Mb record length at 450 MHz state
Increase to 32 Mb record length at 450 MHz state
Increase to 128 Mb record length at 450 MHz state
Enable full analog multiplexer
Factory install
18 www.tektronix.com
Tektronix Logic Analyzers – TLA7000 Series
TLA7ACx language options
Opt. LG1
Opt. L99
Global manual
No manual
TLA7BBx logic analyzer modules
TLA7BBx modules
Includes: Certificate of calibration, and one-year warranty (return to Tektronix).
Probes must be ordered separately.
TLA7BB2
TLA7BB3
TLA7BB4
68-channel Logic Analyzer module, 50 GHz MagniVu timing, 750 MHz state clock, 2 Mb record length. Options for up to 64 Mb
record length and/or up to 1.4 GHz state clock.
102-channel Logic Analyzer module, 50 GHz MagniVu timing, 750 MHz state clock, 2 Mb record length. Options for up to 64 Mb
record length and/or up to 1.4 GHz state clock.
136-channel Logic Analyzer module, 50 GHz MagniVu timing, 750 MHz state clock, 2 Mb record length. Options for up to 64 Mb
record length and/or up to 1.4 GHz state clock.
TLA7BBx module options
Base configuration is 2 Mb record length at 750 MHz state clock with full Analog Multiplexer capability.
Opt. 1S
Opt. 2S
Opt. 3S
Opt. 4S
Opt. 5S
Opt. 6S
Opt. 7S
Opt. 8S
Opt. 9S
Opt. AS
Opt. BS
Opt. 88
Increase to 4 Mb record length at 750 MHz state clock
Increase to 8 Mb record length at 750 MHz state clock
Increase to 16 Mb record length at 750 MHz state clock
Increase to 32 Mb record length at 750 MHz state clock
Increase to 64 Mb record length at 750 MHz state clock
Increase to 2 Mb record length at 1.4 GHz state clock
Increase to 4 Mb record length at 1.4 GHz state clock
Increase to 8 Mb record length at 1.4 GHz state clock
Increase to 16 Mb record length at 1.4 GHz state clock
Increase to 32 Mb record length at 1.4 GHz state clock
Increase to 64 Mb record length at 1.4 GHz state clock
Factory install
TLA7BBx Customer Deskew fixture
020-2942-xx
020-2940-xx
TLA7BBx Customer Deskew fixture for P6800 series probes
TLA7BBx Customer Deskew fixture for P6900 series probes
www.tektronix.com 19
Datasheet
TLA7BBx language options
Opt. L0
Opt. L5
Opt. L10
Opt. L99
English manual
Japanese manual
Russian manual
No manual
Service options
The following service options are offered for the TLA logic analyzer products.
Option
TLA7000 mainframes TLA7ACx modules
TLA7BBx modules
TLA7SAxx modules
Opt. C3 Calibration service 3 years
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Opt. C5 Calibration service 5 years
X
X
X
X
Opt. D1 Calibration data report
Opt. D3 Calibration data report 3 years (with Opt. C3)
Opt. D5 Calibration data report 5 years (with Opt. C5)
Opt. G3 Complete care 3 years (includes loaner, scheduled
calibration and more). TLA7012, TLA7BB2, TLA7BB3, TLA7BB4,
TLA7SA08, TLA7SA16 only
X
X
Opt. G5 Complete care 5 years (includes loaner, scheduled
calibration and more). TLA7012, TLA7BB2, TLA7BB3, TLA7BB4,
TLA7SA08, TLA7SA16 only
X
Opt. R3 Repair service 3 years
X
X
X
X
X
X
X
X
X
X
X
Opt. R5 Repair service 5 years
Opt. S1 On-site service 1 year
Opt. S3 On-site service 3 years (with R or C options)
Opt. R3DW Repair service coverage 3 years (includes product
warranty period).
3-year period starts at time of instrument purchase.
X
X
X
X
X
X
Opt. R5DW Repair service coverage 5 years (includes product
warranty period).
X
5-year period starts at time of instrument purchase.
Warranty
Enter the actual information in this section.
Tektronix is registered to ISO 9001 and ISO 14001 by SRI Quality System Registrar.
20 www.tektronix.com
Tektronix Logic Analyzers – TLA7000 Series
www.tektronix.com 21
Datasheet
ASEAN / Australasia (65) 6356 3900
Belgium 00800 2255 4835*
Austria 00800 2255 4835*
Brazil +55 (11) 3759 7627
Balkans, Israel, South Africa and other ISE Countries +41 52 675 3777
Canada 1 800 833 9200
Central East Europe and the Baltics +41 52 675 3777
Finland +41 52 675 3777
Central Europe & Greece +41 52 675 3777
France 00800 2255 4835*
Denmark +45 80 88 1401
Germany 00800 2255 4835*
Hong Kong 400 820 5835
India 000 800 650 1835
Italy 00800 2255 4835*
Japan 81 (3) 6714 3010
Luxembourg +41 52 675 3777
The Netherlands 00800 2255 4835*
Poland +41 52 675 3777
Russia & CIS +7 (495) 6647564
Sweden 00800 2255 4835*
Mexico, Central/South America & Caribbean 52 (55) 56 04 50 90
Norway 800 16098
Portugal 80 08 12370
South Africa +41 52 675 3777
Switzerland 00800 2255 4835*
USA 1 800 833 9200
Middle East, Asia, and North Africa +41 52 675 3777
People's Republic of China 400 820 5835
Republic of Korea 001 800 8255 2835
Spain 00800 2255 4835*
Taiwan 886 (2) 2722 9622
United Kingdom & Ireland 00800 2255 4835*
* European toll-free number. If not accessible, call: +41 52 675 3777
Updated 10 April 2013
For Further Information. Tektronix maintains a comprehensive, constantly expanding collection of application notes, technical briefs and other resources to help engineers working on the cutting edge of technology. Please visit www.tektronix.com.
©
Copyright Tektronix, Inc. All rights reserved. Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supersedes that in all previously published material. Specification and price
change privileges reserved. TEKTRONIX and TEK are registered trademarks of Tektronix, Inc. All other trade names referenced are the service marks, trademarks, or registered trademarks of their respective companies.
23 Sep 2013
52W-15053-17
www.tektronix.com
相关型号：
119-FREQ-AM0
HCMOS Output Clock Oscillator, 0.012MHz Min, 170MHz Max, ROHS COMPLIANT, SMD, 4 PIN
FOX
1190
2.36mm (.093") Diameter, Standard .093" Pin and Socket Crimp Terminal, Series 1190, Male, with Tin (Sn) Plated Brass Contact, 14-20 AWG, Reel
MOLEX
1190-L
2.36mm (.093") Diameter, Standard .093" Pin and Socket Crimp Terminal, Series 1190, Male, with Gold (Au) Plated Brass Contact, 14-20 AWG, Bag
MOLEX
1190550
2.36mm (.093") Diameter, Standard .093" Pin and Socket Crimp Terminal, Series 1190, Male, with Gold (Au) Plated Brass Contact, 14-20 AWG, Reel
MOLEX
©2020 ICPDF网 联系我们和版权申明