A101120006 [ETC]

;


型号：	A101120006
厂家：	ETC
描述：
文件：	总3页 (文件大小：64K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Timers

Delay on Operate

Types A 108, A 101, A 208, A 201

• Time ranges: 0.15 s to 600 s

• Automatic start

• Knob-adjustable time within range

• Oscillator-controlled time circuit

• Repeatability deviation: ≤ 1%

• Output: 10 A SPDT or 8 A DPDT relay

• Plug-in type module

• Scantimer housing

• LED-indication for relay on

• AC or DC power supply

Product Description

Ordering Key

A 108 024 600

Function

Output

Type

Mono-function, plug-in, de- relays can be used to pre-

lay on operate miniature time vent several motors from

relays up to 600 s (10 min) starting simultaneously due

Power supply

Time range

covering

ranges. These economical

3 individual time to power supply interruptions.

Type Selection

Plug

Output Time ranges

Supply: 24 VAC/DC

Supply: 120 VAC

Supply: 220 VAC

Circular

8 pin

SPDT

DPDT

0.15- 6 s

1.5 - 60 s

15 -600 s

A 108 024 006

A 108 024 060

A 108 024 600

A 108 120 006

A 108 120 060

A 108 120 600

A 108 220 006

A 108 220 060

A 108 220 600

Circular

11 pin

0.15- 6 s

1.5 - 60 s

15 -600 s

A 101 024 006

A 101 024 060

A 101 024 600

A 101 120 006

A 101 120 060

A 101 120 600

A 101 220 006

A 101 220 060

A 101 220 600

Circular

8 pin

0.15- 6 s

1.5 - 60 s

15 -600 s

A 208 024 006

A 208 024 060

A 208 024 600

A 208 120 006

A 208 120 060

A 208 120 600

A 208 220 006

A 208 220 060

A 208 220 600

Circular

11 pin

0.15- 6 s

1.5 - 60 s

15 -600 s

A 201 024 006

A 201 024 060

A 201 024 600

A 201 120 006

A 201 120 060

A 201 120 600

A 201 220 006

A 201 220 060

A 201 220 600

Time Specifications

Time ranges

0.15- 6 s

1.5 - 60 s

15 - 600 s

Repeatability deviation

Time variation

Within rated power supply

and ambient temperature

≤ 1%

≤ 0.05%/V

≤ 0.2%/°C

Time range accuracy

0 to +10% on max.

min. actual time ≤ min.

set time

Reset

Time and/or relay

Power supply interruption

≥ 250 ms

Specifications are subject to change without notice (25.10.99)

A 108, A 101, A 208, A 201

Output Specifications

A 108, A 101

A 208, A 201

Output

Basic electrical insulation

SPDT relay

250 VAC (rms) (contact/electronics)

DPDT relay

250 VAC (rms) (contacts/elec., contact/contact)

Contact ratings (Ag-CdO)

µ (micro gap)

Resistive loads

AC 1 10 A/250 VAC (2500 VA)

DC 1 1 A/250 VDC (250 W)

or 10 A/25 VDC (250 W)

8 A/250 VAC (2000 VA)

0.4 A/250 VDC (100 W)

4 A/25 VDC (100 W)

2.5 A/230 VAC

Small inductive loads AC 15 2.5 A/230 VAC

DC 13 5 A/24 VDC

5 A/24 VDC

Mechanical life

Electrical life

≥ 30 x 10⁶operations

AC 1 ≥ 2.5 x 10⁵operations (at max. load)

≥ 30 x 10⁶operations

≥ 2.5 x 10⁵operations (at max. load)

Operating frequency

≤ 7200 operations/h

Insulation voltages

Rated insulation voltage

≥ 2.0 kVAC (rms) (contact/electronics)

Rated transient protection volt. 4 kV (1.2/50 µs) (contact/electronics) (IEC 60664)

4 kV (1.2/50 µs) (contact/electronics) (IEC 60664)

Supply Specifications

General Specifications

Power-on delay

Power-off delay

Indication for

Output ON

≤ 200 ms

≥ 250 ms

Power supply AC types

installation cat. III (IEC 60664)

Rated operational voltage

through pins 2 & 10

or pins 2 & 7

220

220 VAC + 15/- 20%,

45 to 65 Hz

120 VAC + 15/- 20%,

45 to 65 Hz

24 VAC + 15/- 20%,

45 to 65 Hz

≥ 10 ms

LED, red

IP 20 B

2 (IEC 60664)

-20° to +50°C (-4° to +122°F)

-50° to +85°C (-58° to +185°F)

120

024

Environment

Polution degree

Operating temperature

Storage temperature

Drop out tolerance

Rated insulation voltage

Rated transient protection volt. 4 kV (1.2/50 µs) @ 220 VAC

2.5 kV (1.2/50 µs) @ 120 VAC

None

Weight

Approvals

85 g

UL, CSA

800 V (1.2/50 µs) @ 24 VAC

(line/neutral)

Power supply DC type

Rated operational voltage 024 24 VDC + 15/- 20% (pin 2 pos.)

Rated insulation voltage None

Rated transient protection volt. 800 V (1.2/50 µs)

Installation cat. III (IEC 60664)

Consumption

AC supply

DC supply

60 mA @ 50 Hz/70 mA @ 60 Hz

1 W

Wiring Diagrams

Mode of Operation

The delay period begins when If power supply is interrupted

power supply is applied.

for more than 250 ms before

the relay operates, the time

At the end of the set delay, circuit is reset to zero and the

the relay will operate and will time relay is ready for a new

not release until power sup- time period.

ply is interrupted.

A recovery period of 250 ms

should be allowed before re-

applying power supply.

Power supply

A 108, A 208

Power supply

A 101, A 201

Specifications are subject to change without notice (25.10.99)

A 108, A 101, A 208, A 201

Accessories

Time Setting

Knob-adjustable on scale in

seconds.

Sockets◊

S 408, S 411

SM 13

BB4

Hold down spring◊

Mounting rack

Socket cover

Potentiometer lock

PL 1

For further information refer to "Accessories".

Operation Diagram

Power supply

Relay on

Specifications are subject to change without notice (25.10.99)

相关型号：