首页 |元器件品牌

ADM6315-28D4ART-RL [ETC]

Voltage Detector ; 电压检测器\n
ADM6315-28D4ART-RL
型号： ADM6315-28D4ART-RL
厂家： ETC    ETC
描述：

Voltage Detector
电压检测器\n
文件： 总8页 (文件大小：69K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
Open-Drain Microprocessor  
Supervisory Circuit in 4-Lead SOT-143  
a
ADM6315  
FEATURES  
FUNCTIO NAL BLO CK D IAGRAM  
Superior Upgrade for MAX6315  
Specified Over Temperature  
Low Power Consumption (5 ␮A Typ)  
Precision Voltage Monitor of Voltages from 2.5 V to  
5 V at 100 mV Increments  
V
GND  
CC  
V
REF  
ADM6315  
Reset Assertion Down to VCC > 1 V  
Built-In Manual Reset  
Pin Compatible with the ADM811  
RESET  
RESET  
CIRCUITRY  
APPLICATIONS  
DEBOUNCE  
MR  
Microprocessor Systems  
Controllers  
Intelligent Instruments  
Automotive Systems  
Safety Systems  
Portable Instruments  
GENERAL D ESCRIP TIO N  
T he ADM6315 is a reliable voltage monitoring device that is  
suitable for use in most voltage monitoring applications.  
V
CC  
SYSTEM POWER  
10k⍀  
␮P  
SYSTEM  
ADM6315  
T he ADM6315 is designed to monitor as little as a 1.8% degra-  
dation of a power supply voltage. Voltages that can be moni-  
tored by the ADM6315 are all voltages (at 100 mV increments)  
from 2.5 V to 5 V.  
MR  
RESET  
RESET  
GND  
GND  
Included in this circuit is a debounced Manual Reset input.  
Reset can be activated using an ordinary switch (pulling MR  
low), by a low input from another digital device, or by a degra-  
dation of the supply voltage. T he manual reset function is very  
useful, especially if the circuit in which the ADM6315 is operat-  
ing enters into a state that can only be detected by the user.  
Allowing the user to manually reset a system can reduce the  
damage or danger that could otherwise be caused by an out of  
control or locked-up system.  
Figure 1. Typical Operating Circuit  
T he ADM6315 comes in a cost and space efficient SOT -143  
package.  
REV. A  
Information furnished by Analog Devices is believed to be accurate and  
reliable. However, no responsibility is assumed by Analog Devices for its  
use, norforanyinfringementsofpatentsorotherrightsofthirdpartiesthat  
may result from its use. No license is granted by implication or otherwise  
under any patent or patent rights of Analog Devices.  
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.  
Tel: 781/329-4700  
Fax: 781/326-8703  
www.analog.com  
© Analog Devices, Inc., 2001  
(V = Full Operating Range, T = TMIN to T , V Typ = 5 V unless otherwise noted.)  
ADM6315–SPECIFICATIONS  
CC  
A
MAX CC  
P
aram eter  
Min  
Typ  
Max  
Unit  
Test Conditions/Com m ents  
SUPPLY  
Operating Voltage  
VCC Supply Current  
1.0  
5.5  
12  
12  
V
µA  
µA  
TA = 0°C to 70°C  
VCC = 5.5 V (No Load)  
VCC = 3.6 V (No Load)  
5
4
RESET VOLT AGE T HRESHOLD (VT H)*  
VT H – 1.8% VT H  
VT H – 2.5%  
VT H + 1.8%  
VT H + 2.5%  
V
V
T A = 25°C  
T A = 0°C to 70°C  
RESET T HRESHOLD T EMPERAT URE  
COEFFICIENT  
60  
35  
ppm/°C  
µs  
VCC T O RESET DELAY  
VCC = Falling at 1 mV/µs  
RESET ACT IVE T IMEOUT PERIOD  
1
20  
140  
1120  
1.4  
28  
200  
1570  
2.6  
53  
370  
2960  
ms  
ms  
ms  
ms  
ADM6315xxD1  
ADM6315xxD2  
ADM6315xxD3  
ADM6315xxD4  
MANUAL RESET  
Input T hreshold  
0.8  
V
V
V
V
µs  
ns  
ns  
kΩ  
VT H > 4.0 V (VIL)  
VT H > 4.0 V (VIH)  
VT H < 4.0 V (VIL)  
VT H < 4.0 V (VIH)  
2.4  
0.3 VCC  
1
0.7 VCC  
Minimum Input Pulse  
Glitch Rejection  
T o Reset Delay  
100  
500  
63  
Pull-Up Resistance  
32  
100  
RESET OUT PUT  
Output Voltage  
0.4  
0.3  
0.3  
1
V
V
V
µA  
VCC > 4.25 V, ISINK = 3.2 mA  
VCC > 2.5 V, ISINK = 1.2 mA  
VCC > 1 V, ISINK = 80 mA  
Output Leakage Current  
VCC > VT H, RESET Deasserted  
*T he ADM6315 is available with preset reset threshold values from 2.5 V to 5 V at 100 mV increments.  
Specifications subject to change without notice.  
–2–  
REV. A  
ADM6315  
ABSO LUTE MAXIMUM RATINGS*  
(T A = 25°C unless otherwise noted)  
P IN CO NFIGURATIO N  
T erminal Voltage (With Respect to Ground)  
4
3
1
2
V
GND  
VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to +6 V  
All Other Inputs . . . . . . . . . . . . . . . . –0.3 V to VCC + 0.3 V  
Input Current  
CC  
ADM6315  
TOP VIEW  
(Not to Scale)  
RESET  
MR  
VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 mA  
Output Current  
RESET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 mA  
Power Dissipation (TA = 70°C)  
P IN FUNCTIO N D ESCRIP TIO NS  
RT -4, SOT -143  
P in Mnem onic  
Function  
Derate by 4 mW/°C above 70°C . . . . . . . . . . . . . 320 mW  
θJA T hermal Impedance . . . . . . . . . . . . . . . . . . . . 330°C/W  
Operating T emperature Range . . . . . . . . . . . –40°C to +85°C  
Storage T emperature Range . . . . . . . . . . . . –65°C to +160°C  
Lead T emperature (Soldering, 10 secs) . . . . . . . . . . . . 300°C  
Vapor Phase (60 sec) . . . . . . . . . . . . . . . . . . . . . . . . 215°C  
Infrared (15 sec) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220°C  
ESD Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.5 kV  
1
2
GND  
0 V. Ground reference for all signals.  
RESET  
Active Low Logic Output. RESET remains  
low while VCC is below the reset threshold  
or when MR is low; RESET then remains  
low for either 1 ms (min), 20 ms (min),  
140 ms (min), or 1120 ms (min) after  
VCC rises above the reset threshold and  
MR is high.  
*Stresses above those listed under Absolute Maximum Ratings may cause perma-  
nent damage to the device. T his is a stress rating only; functional operation of the  
device at these or any other conditions above those listed in the operational  
sections of this specification is not implied. Exposure to absolute maximum ratings  
for extended periods of time may affect device reliability.  
3
4
MR  
Manual Reset. This active low debounced  
input will ignore input pulses of 100 ns  
(typical) and is guaranteed to accept input  
pulses of greater than 1 µs. Leave floating  
when not used.  
VCC  
Monitored Supply Voltage  
O RD ERING GUID E  
Tem perature  
Range  
P ackage  
D escription  
P ackage  
O ption  
Model  
ADM6315–xxxxxxx-xx*  
–40°C to +85°C  
Plastic Surface Mount  
SOT -143  
*Refer to T ables I to IV.  
REV. A  
–3–  
–Typical Performance Characteristics  
ADM6315  
800  
700  
600  
500  
400  
300  
200  
100  
0
10  
8
6
4
2
0
V
= 5.5  
CC  
V
= 3  
= 1  
CC  
CC  
V
–100  
0
–40  
–20  
0
20  
40  
60  
80  
100  
125  
4
8
20  
60  
100  
400  
800 1200 1600  
TEMPERATURE – ؇C  
RESET COMPARATOR OVERDRIVE, V –V – mV  
TH CC  
TPC 1. Supply Current vs. Temperature  
TPC 4. Maximum Transient Duration vs.  
RESET Comparator Overdrive  
450  
400  
350  
300  
250  
200  
150  
100  
1.005  
1.000  
V
= 20mV  
OD  
0.995  
0.990  
V
= 125mV  
OD  
50  
0
V
= 200mV  
OD  
–40  
–20  
0
20  
40  
60  
80  
100  
125  
–40  
–20  
0
20  
40  
60  
80  
100  
125  
TEMPERATURE – ؇C  
TEMPERATURE – ؇C  
TPC 2. Power-Down Reset Delay vs. Temperature  
TPC 5. Normalized Reset Threshold vs.  
Temperature (VCC Falling)  
1.06  
1.04  
1.02  
1.00  
0.98  
0.96  
0.94  
12  
10  
8
+85؇C  
6
–40؇C  
+25؇C  
4
2
0
–40  
–20  
0
20  
40  
60  
80  
100  
125  
0
1
2
3
4
5
TEMPERATURE – ؇C  
SUPPLY VOLTAGE – V  
TPC 3. Normalized Reset Timeout Period vs. Temperature  
(VCC Rising)  
TPC 6. Supply Current vs. Supply Voltage  
–4–  
REV. A  
ADM6315  
MANUAL RESET INP UT  
INTERFACING TO O TH ER D EVICES  
O UTP UT  
T he ADM6315 also provides an additional input, MR. T his  
input can be used either as a means for the system operator to  
manually reset the system via a switch or for a digital circuit to  
reset the system.  
T he ADM6315 series is designed to integrate with as many  
devices as possible. One feature of the ADM6315 is the RESET  
open drain output, which can sink current from sources with a  
voltage greater than the VCC of the ADM6315 input, making it  
suitable for use in more diverse applications.  
T he MR input will (typical) ignore negative going pulses faster  
than 100 ns and is guaranteed to accept any negative going  
input pulse of a duration greater than or equal to 1 µs. If MR is  
connected to long cables or used in a noisy environment, then  
placing a 1 µF decoupling capacitor between the MR input and  
ground will further improve the glitch immunity of the ADM6315.  
TH E BENEFITS O F A VERY ACCURATE RESET  
TH RESH O LD  
Because the ADM6315 series can operate effectively even when  
there are large degradations of the supply voltages (due to an  
accurate internal voltage reference circuit), the possibility of a  
malfunction during a power failure is greatly reduced.  
V
TRIP-POINT (MAX)  
CC  
V
TRIP-POINT  
CC  
V
TRIP-POINT (MIN)  
CC  
V
CC  
V
CC  
V
TRIP-POINT(MAX)  
CC  
RESET ACTIVE TIMEOUT  
V
TRIP-POINT  
CC  
V
TRIP-POINT (MIN)  
CC  
V
TO RESET  
DELAY  
CC  
RST  
RST  
VOL  
Figure 3. VCC Power-Up Timing Diagram  
Figure 2. VCC Power-Down/Brownout Timing Diagram  
TRANSIENT IMMUNITY  
As well as being an accurate reset circuit, the ADM6315 has  
good immunity to negative going transients (T PC 4). Because  
of this characteristic, the ADM6315 is suitable for use in noisy  
environments.  
D ETAILED D ESCRIP TIO N  
T he ADM6315 is designed to protect the integrity of a systems  
operation by ensuring the proper operation of the system during  
power-up, power-down and brownout conditions.  
T PC 4 shows the reset comparator overdrive (the maximum  
magnitude of negative going pulses with respect to the typical  
reset threshold) versus pulse duration, without causing a reset.  
When the ADM6315 is powered-up (depending on the selected  
reset active timeout), the RESET output of the ADM6315 will  
remain low for a period typically equalling the Reset Active  
T imeout Period. T his is designed to give the system time to  
power-up correctly and for the power supply to stabilize before  
any devices are brought out of reset and allowed to begin executing  
instructions. Initializing a system in this way provides a more  
reliable startup for microprocessor systems.  
When a brownout condition occurs (assuming VCC is falling at  
1 mV/µs), the ADM6315 will produce a reset in typically 35 µs.  
Producing a reset this fast means that the entire system can be  
reset together before any part of the system’s voltage falls below  
its recommended operating voltage. T his can avoid dangerous  
and/or erroneous operation of a microprocessor-based system.  
REV. A  
–5–  
ADM6315  
Table I.  
Table II.  
Min  
Min  
Trip-  
P oint  
Tim eout  
(m s)  
Trip-  
P oint  
Tim eout  
(m s)  
Model*  
Brand  
Model*  
Brand  
ADM6315-50D1ART -RL7 5.00  
ADM6315-50D1ART -RL 5.00  
ADM6315-49D1ART -RL7 4.90  
ADM6315-49D1ART -RL 4.90  
ADM6315-48D1ART -RL7 4.80  
ADM6315-48D1ART -RL 4.80  
ADM6315-47D1ART -RL7 4.70  
ADM6315-47D1ART -RL 4.70  
ADM6315-46D1ART -RL7 4.63  
ADM6315-46D1ART -RL 4.63  
ADM6315-45D1ART -RL7 4.50  
ADM6315-45D1ART -RL 4.50  
ADM6315-44D1ART -RL7 4.39  
ADM6315-44D1ART -RL 4.39  
ADM6315-43D1ART -RL7 4.30  
ADM6315-43D1ART -RL 4.30  
ADM6315-42D1ART -RL7 4.20  
ADM6315-42D1ART -RL 4.20  
ADM6315-41D1ART -RL7 4.10  
ADM6315-41D1ART -RL 4.10  
ADM6315-40D1ART -RL7 4.00  
ADM6315-40D1ART -RL 4.00  
ADM6315-39D1ART -RL7 3.90  
ADM6315-39D1ART -RL 3.90  
ADM6315-38D1ART -RL7 3.80  
ADM6315-38D1ART -RL 3.80  
ADM6315-37D1ART -RL7 3.70  
ADM6315-37D1ART -RL 3.70  
ADM6315-36D1ART -RL7 3.60  
ADM6315-36D1ART -RL 3.60  
ADM6315-35D1ART -RL7 3.50  
ADM6315-35D1ART -RL 3.50  
ADM6315-34D1ART -RL7 3.40  
ADM6315-34D1ART -RL 3.40  
ADM6315-33D1ART -RL7 3.30  
ADM6315-33D1ART -RL 3.30  
ADM6315-32D1ART -RL7 3.20  
ADM6315-32D1ART -RL 3.20  
ADM6315-31D1ART -RL7 3.08  
ADM6315-31D1ART -RL 3.08  
ADM6315-30D1ART -RL7 3.00  
ADM6315-30D1ART -RL 3.00  
ADM6315-29D1ART -RL7 2.93  
ADM6315-29D1ART -RL 2.93  
ADM6315-28D1ART -RL7 2.80  
ADM6315-28D1ART -RL 2.80  
ADM6315-27D1ART -RL7 2.70  
ADM6315-27D1ART -RL 2.70  
ADM6315-26D1ART -RL7 2.63  
ADM6315-26D1ART -RL 2.63  
ADM6315-25D1ART -RL7 2.50  
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
MDZ  
MDZ  
MDY  
MDY  
MDX  
MDX  
MDW  
MDW  
MDV  
MDV  
MDU  
MDU  
MDT  
MDT  
MDS  
MDS  
MDR  
MDR  
MDQ  
MDQ  
MDP  
MDP  
MDO  
MDO  
MDN  
MDN  
MDM  
MDM  
MDL  
MDL  
MDK  
MDK  
MDJ  
ADM6315-50D2ART -RL7 5.00  
ADM6315-50D2ART -RL 5.00  
ADM6315-49D2ART -RL7 4.90  
ADM6315-49D2ART -RL 4.90  
ADM6315-48D2ART -RL7 4.80  
ADM6315-48D2ART -RL 4.80  
ADM6315-47D2ART -RL7 4.70  
ADM6315-47D2ART -RL 4.70  
ADM6315-46D2ART -RL7 4.63  
ADM6315-46D2ART -RL 4.63  
ADM6315-45D2ART -RL7 4.50  
ADM6315-45D2ART -RL 4.50  
ADM6315-44D2ART -RL7 4.39  
ADM6315-44D2ART -RL 4.39  
ADM6315-43D2ART -RL7 4.30  
ADM6315-43D2ART -RL 4.30  
ADM6315-42D2ART -RL7 4.20  
ADM6315-42D2ART -RL 4.20  
ADM6315-41D2ART -RL7 4.10  
ADM6315-41D2ART -RL 4.10  
ADM6315-40D2ART -RL7 4.00  
ADM6315-40D2ART -RL 4.00  
ADM6315-39D2ART -RL7 3.90  
ADM6315-39D2ART -RL 3.90  
ADM6315-38D2ART -RL7 3.80  
ADM6315-38D2ART -RL 3.80  
ADM6315-37D2ART -RL7 3.70  
ADM6315-37D2ART -RL 3.70  
ADM6315-36D2ART -RL7 3.60  
ADM6315-36D2ART -RL 3.60  
ADM6315-35D2ART -RL7 3.50  
ADM6315-35D2ART -RL 3.50  
ADM6315-34D2ART -RL7 3.40  
ADM6315-34D2ART -RL 3.40  
ADM6315-33D2ART -RL7 3.30  
ADM6315-33D2ART -RL 3.30  
ADM6315-32D2ART -RL7 3.20  
ADM6315-32D2ART -RL 3.20  
ADM6315-31D2ART -RL7 3.08  
ADM6315-31D2ART -RL 3.08  
ADM6315-30D2ART -RL7 3.00  
ADM6315-30D2ART -RL 3.00  
ADM6315-29D2ART -RL7 2.93  
ADM6315-29D2ART -RL 2.93  
ADM6315-28D2ART -RL7 2.80  
ADM6315-28D2ART -RL 2.80  
ADM6315-27D2ART -RL7 2.70  
ADM6315-27D2ART -RL 2.70  
ADM6315-26D2ART -RL7 2.63  
ADM6315-26D2ART -RL 2.63  
ADM6315-25D2ART -RL7 2.50  
ADM6315-25D2ART -RL 2.50  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
MEZ  
MEZ  
MEY  
MEY  
MEX  
MEX  
MEW  
MEW  
MEV  
MEV  
MEU  
MEU  
MET  
MET  
MES  
MES  
MER  
MER  
MEQ  
MEQ  
MEP  
MEP  
MEO  
MEO  
MEN  
MEN  
MEM  
MEM  
MEL  
MEL  
MEK  
MEK  
MEJ  
MDJ  
MDI  
MDI  
MEJ  
MEI  
MEI  
MDH  
MDH  
MDG  
MDG  
MDF  
MDF  
MDE  
MDE  
MDD  
MDD  
MDC  
MDC  
MDB  
MDB  
MDA  
MDA  
MEH  
MEH  
MEG  
MEG  
MEF  
MEF  
MEE  
MEE  
MED  
MED  
MEC  
MEC  
MEB  
MEB  
MEA  
MEA  
ADM6315-25D1ART -RL  
2.50  
NOT ES  
ADM6315-xxxxxxx-RL7 are in reels of 3,000 pieces.  
ADM6315-xxxxxxx-RL are in reels of 10,000 pieces.  
*Only available in reels.  
–6–  
REV. A  
ADM6315  
Table III.  
Table IV.  
Min  
Min  
Trip-  
P oint  
Tim eout  
(m s)  
Trip-  
P oint  
Tim eout  
(m s)  
Model*  
Brand  
Model*  
Brand  
ADM6315-50D3ART -RL7  
ADM6315-50D3ART -RL  
ADM6315-49D3ART -RL7  
ADM6315-49D3ART -RL  
ADM6315-48D3ART -RL7  
ADM6315-48D3ART -RL  
ADM6315-47D3ART -RL7  
ADM6315-47D3ART -RL  
5.00  
5.00  
4.90  
4.90  
4.80  
4.80  
4.70  
4.70  
140  
140  
140  
140  
140  
140  
140  
140  
140  
140  
140  
140  
140  
140  
140  
140  
140  
140  
140  
140  
140  
140  
140  
140  
140  
140  
140  
140  
140  
140  
140  
140  
140  
140  
140  
140  
140  
140  
140  
140  
140  
140  
140  
140  
140  
140  
140  
140  
140  
140  
140  
140  
MFZ  
MFZ  
MFY  
MFY  
MFX  
MFX  
MFW  
MFW  
MFV  
MFV  
MFU  
MFU  
MFT  
MFT  
MFS  
MFS  
MFR  
MFR  
MFQ  
MFQ  
MFP  
MFP  
MFO  
MFO  
MFN  
MFN  
MFM  
MFM  
MFL  
MFL  
MFK  
MFK  
MFJ  
ADM6315-50D4ART -RL  
ADM6315-50D4ART -RL7  
ADM6315-49D4ART -RL  
ADM6315-49D4ART -RL7  
ADM6315-48D4ART -RL  
ADM6315-48D4ART -RL7  
ADM6315-47D4ART -RL  
ADM6315-47D4ART -RL7  
ADM6315-46D4ART -RL  
ADM6315-46D4ART -RL7  
ADM6315-45D4ART -RL  
ADM6315-45D4ART -RL7  
ADM6315-44D4ART -RL  
ADM6315-44D4ART -RL7  
ADM6315-43D4ART -RL  
ADM6315-43D4ART -RL7  
ADM6315-42D4ART -RL  
ADM6315-42D4ART -RL7  
ADM6315-41D4ART -RL  
ADM6315-41D4ART -RL7  
ADM6315-40D4ART -RL  
ADM6315-40D4ART -RL7  
ADM6315-39D4ART -RL  
ADM6315-39D4ART -RL7  
ADM6315-38D4ART -RL  
ADM6315-38D4ART -RL7  
ADM6315-37D4ART -RL  
ADM6315-37D4ART -RL7  
ADM6315-36D4ART -RL  
ADM6315-36D4ART -RL7  
ADM6315-35D4ART -RL  
ADM6315-35D4ART -RL7  
ADM6315-34D4ART -RL  
ADM6315-34D4ART -RL7  
ADM6315-33D4ART -RL  
ADM6315-33D4ART -RL7  
ADM6315-32D4ART -RL  
ADM6315-32D4ART -RL7  
AD M6315-31D 4ART-RL  
5.00  
5.00  
4.90  
4.90  
4.80  
4.80  
4.70  
4.70  
4.63  
4.63  
4.50  
4.50  
4.39  
4.39  
4.30  
4.30  
4.20  
4.20  
4.10  
4.10  
4.00  
4.00  
3.90  
3.90  
3.80  
3.80  
3.70  
3.70  
3.60  
3.60  
3.50  
3.50  
3.40  
3.40  
3.30  
3.30  
3.20  
3.20  
3.08  
1120  
1120  
1120  
1120  
1120  
1120  
1120  
1120  
1120  
1120  
1120  
1120  
1120  
1120  
1120  
1120  
1120  
1120  
1120  
1120  
1120  
1120  
1120  
1120  
1120  
1120  
1120  
1120  
1120  
1120  
1120  
1120  
1120  
1120  
1120  
1120  
1120  
1120  
1120  
1120  
1120  
1120  
1120  
1120  
1120  
1120  
1120  
1120  
1120  
1120  
1120  
1120  
MGZ  
MGZ  
MGY  
MGY  
MGX  
MGX  
MGW  
MGW  
MGV  
MGV  
MGU  
MGU  
MGT  
MGT  
MGS  
MGS  
MGR  
MGR  
MGQ  
MGQ  
MGP  
MGP  
MGO  
MGO  
MGN  
MGN  
MGM  
MGM  
MGL  
MGL  
MGK  
MGK  
MGJ  
AD M6315-46D 3ART-RL7 4.63  
AD M6315-46D 3ART-RL 4.63  
AD M6315-45D 3ART-RL7 4.50  
AD M6315-45D 3ART-RL  
ADM6315-44D3ART -RL7  
ADM6315-44D3ART -RL  
ADM6315-43D3ART -RL7  
ADM6315-43D3ART -RL  
ADM6315-42D3ART -RL7  
ADM6315-42D3ART -RL  
ADM6315-41D3ART -RL7  
ADM6315-41D3ART -RL  
ADM6315-40D3ART -RL7  
ADM6315-40D3ART -RL  
ADM6315-39D3ART -RL7  
ADM6315-39D3ART -RL  
ADM6315-38D3ART -RL7  
ADM6315-38D3ART -RL  
ADM6315-37D3ART -RL7  
ADM6315-37D3ART -RL  
ADM6315-36D3ART -RL7  
ADM6315-36D3ART -RL  
ADM6315-35D3ART -RL7  
ADM6315-35D3ART -RL  
ADM6315-34D3ART -RL7  
ADM6315-34D3ART -RL  
ADM6315-33D3ART -RL7  
ADM6315-33D3ART -RL  
ADM6315-32D3ART -RL7  
ADM6315-32D3ART -RL  
4.50  
4.39  
4.39  
4.30  
4.30  
4.20  
4.20  
4.10  
4.10  
4.00  
4.00  
3.90  
3.90  
3.80  
3.80  
3.70  
3.70  
3.60  
3.60  
3.50  
3.50  
3.40  
3.40  
3.30  
3.30  
3.20  
3.20  
MFJ  
MFI  
MFI  
MGJ  
MGI  
MGI  
MFH  
MFH  
MFG  
MFG  
MFF  
MFF  
MFE  
MFE  
MFD  
MFD  
MFC  
MFC  
MFB  
MFB  
MFA  
MFA  
MGH  
MGH  
MGG  
MGG  
MGF  
MGF  
MGE  
MGE  
MGD  
MGD  
MGC  
MGC  
MGB  
MGB  
MGA  
MGA  
AD M6315-31D 3ART-RL7 3.08  
AD M6315-31D 3ART-RL  
ADM6315-30D3ART -RL7  
ADM6315-30D3ART -RL  
ADM6315-29D3ART -RL7  
ADM6315-29D3ART -RL  
ADM6315-28D3ART -RL7  
ADM6315-28D3ART -RL  
ADM6315-27D3ART -RL7  
ADM6315-27D3ART -RL  
ADM6315-26D3ART -RL7  
ADM6315-26D3ART -RL  
ADM6315-25D3ART -RL7  
ADM6315-25D3ART -RL  
3.08  
3.00  
3.00  
2.93  
2.93  
2.80  
2.80  
2.70  
2.70  
2.63  
2.63  
2.50  
2.50  
AD M6315-31D 4ART-RL7 3.08  
ADM6315-30D4ART -RL  
ADM6315-30D4ART -RL7  
ADM6315-29D4ART -RL  
ADM6315-29D4ART -RL7  
ADM6315-28D4ART -RL  
ADM6315-28D4ART -RL7  
ADM6315-27D4ART -RL  
ADM6315-27D4ART -RL7  
AD M6315-26D 4ART-RL  
3.00  
3.00  
2.93  
2.93  
2.80  
2.80  
2.70  
2.70  
2.63  
AD M6315-26D 4ART-RL7 2.63  
ADM6315-25D4ART -RL  
ADM6315-25D4ART -RL7  
2.50  
2.50  
NOT ES  
All parts in bold are ex-stock. Consult factory for availability of orders.  
ADM6315-xxxxxxx-RL7 are in reels of 3,000 pieces.  
ADM6315-xxxxxxx-RL are in reels of 10,000 pieces.  
*Only available in reels.  
REV. A  
–7–  
ADM6315  
O UTLINE D IMENSIO NS  
D imensions shown in inches and (mm).  
4-Lead P lastic Surface Mount P ackage  
(SO T-143)  
0.079 (2.00)  
0.071 (1.80)  
4
1
3
2
0.055 (1.40)  
0.047 (1.20)  
0.098 (2.50)  
0.083 (2.10)  
PIN 1  
0.080 (2.03)  
0.070 (1.78)  
0.120 (3.05)  
0.105 (2.67)  
7؇  
0.004 (0.10)  
0.001 (0.03)  
0.040 (1.02)  
0.031 (0.79)  
8؇  
0؇  
0.0059 (0.089)  
0.0035 (0.15)  
0.037 (0.94)  
0.030 (0.77)  
0.021 (0.54)  
0.015 (0.38)  
0.010 (0.25)  
0.005 (0.13)  
SEATING  
PLANE  
Revision History  
Location  
P age  
D ata Sheet changed fr om REV. 0 to REV. A.  
Edits to T able III . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Edits to T able IV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
–8–  
REV. A  

相关型号：

SI9130DB

 5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

 Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

 500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明