AMC7584-XXT [ETC]
7A LOW DROPOUT REGULATOR; 7A低压差稳压器型号: | AMC7584-XXT |
厂家: | ETC |
描述: | 7A LOW DROPOUT REGULATOR |
文件: | 总7页 (文件大小:472K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
AMC DOC. #: AMC7584_E (LF)
Feb 2005
®
AMC7584
A
DD MICROTECH CORP.
7A LOW DROPOUT REGULATOR
DESCRIPTION
FEATURES
The AMC7584 series is a high performance low dropout
regulator rated for 7A output current. It is designed for use
in applications requiring low dropout characteristics over
rated current range. The AMC7584 series offers fixed 2.5V,
3.3V, 5V and adjustable output voltage versions. In addition,
the AMC7584 series features the device protections including
over current and thermal shutdown. Also, reverse battery
protection scheme limits the reverse current when the input
voltage falls below the output.
ꢀ
Input-Output differential of typical
1.1V at 7A and low quiescent current
Output current is excess of 7A
Reverse battery protection
ꢀ
ꢁ
ꢁ
ꢁ
ꢁ
Short circuit protection
Internal thermal overload protection
Available in 3L plastic TO-220 and
surface mount 3L TO-263 packages
Pin assignment identical to EZ1585B
and LT1585A series.
ꢁ
APPLICATIONS
PACKAGE PIN OUT
ꢀ
ꢀ
ꢀ
ꢀ
Pentiumꢀ Processor Supplies
PowerPCTM Supplies
Computer Add-On Cards
Other Applications Requiring Low
Dropout Voltage Over Rated Current.
VIN
Vout
Gnd/Adj
3-Pin Plastic TO-220
(Top View)
AMC7584-2.5 – 2.5V Fixed
AMC7584-3.3 – 3.3V Fixed
AMC7584-5.0 – 5.0V Fixed
AMC7584-ADJ– Adjustable
VIN
Vout
Gnd/Adj
3-Pin Plastic TO-263
Surface Mount
(Top View)
ORDER INFORMATION
Plastic TO-263
3-pin
Plastic TO-220
TA (OC)
T
ST
3-pin
0 to 70
0 to 70
0 to 70
0 to 70
AMC7584-XXT
AMC7584-XXST
AMC7584-XXTF (Lead Free)
AMC7584-ADJT
AMC7584-XXSTF (Lead Free)
AMC7584-ADJST
AMC7584-ADJTF (Lead Free)
AMC7584-ADJSTF (Lead Free)
Note: 1.All surface-mount packages are available in Tape & Reel. Append the letter “T” to part number (i.e.,
AMC7584-X.XSTT).
2.The letter “F” is marked for Lead Free process.
Copyright © 2002, ADD Microtech Corp.
1
www.addmtek.com
AMC7584
7A LOW DROPOUT REGULATOR
AMC DOC. #: AMC7584_E (LF)
Feb 2005
TYPICAL APPLICATION
2.5V/3.3V/5V
AMC7584-
X.X
VIN ≥ 4V
C1
10µF
C2
22µF
AMC7584-X.X application schematic
AMC7584 -
ADJ
VIN
VOUT
R1
1%
ADJ
*C1
10µF
**C2
22µF
R2
1%
* REQUIRED IF REGULATOR IS
LOCATED FAR FROM POWER
SUPPLY FILTER
** DESIGN C2 AS CLOSE TO VOUT PIN
AS POSSIBLE
VOUT = VREF (1+(R2/R1)) + IADJR2
AMC7584-ADJ application schematic
Copyright © 2002, ADD Microtech Corp.
2
www.addmtek.com
AMC7584
7A LOW DROPOUT REGULATOR
AMC DOC. #: AMC7584_E (LF)
Feb 2005
ABSOLUTE MAXIMUM RATINGS (Note 1)
Input Voltage (VIN)
7V
Operating Junction temperature
Storage Temperature Range
Lead temperature (Soldering, 10 seconds)
150OC
-65OC to 150OC
300OC
Note 1: Exceeding these ratings could cause damage to the device. All voltages are with respect to Ground.
Currents are positive into, negative out of the specified terminal.
THERMAL DATA
T, ST PACKAGE:
3.0OC /W
45OC /W
Thermal Resistance-Junction to Tab, θJT
Thermal Resistance-Junction to Ambient, θJA
The θJA numbers are guidelines for the thermal performance of the device/pc-board system.
TJ = TA + (PD × θJA)., all of the above assume no ambient airflow.
BLOCK DIAGRAM
VIN
VOUT
THERMAL
LIMIT
1.25V
VREF
GND
AMC7584-X.X circuit schematic
VIN
1.25V
VREF
THERMAL
LIMIT
VOUT
ADJ
AMC7584-ADJ circuit schematic
Copyright © 2002, ADD Microtech Corp.
3
www.addmtek.com
AMC7584
7A LOW DROPOUT REGULATOR
AMC DOC. #: AMC7584_E (LF)
Feb 2005
RECOMMENDED OPERATING CONDITIONS
Recommended Operating Conditions
Parameter
Symbol
Units
Min.
4.0
Typ.
Max.
7
Input Voltage
VIN
IO
V
A
Load Current (with adequate heatsinking)
Input Capacitor (VIN to GND)
0.010
1.0
7
µF
µF
10
Output Capacitor with ESR of 10Ω max., (VOUT to GND)
ELECTRICAL CHARACTERISTICS
Unless otherwise specified, these specifications apply over the operating ambient temperature of 0OC to +70OC for
AMC7584; IO = 10mA, COUT = 10 µF, and are for DC characteristics only. (Low duty cycle pulse testing techniques
are used which maintains junction and case temperatures equal to the ambient temperature.)
AMC7584
Parameter
Symbol
Test Conditions
VIN = 4V, TA = 25OC
Units
Min. Typ. Max.
2.475 2.500 2.525
AMC7584-2.5
Output Voltage
VO
V
AMC7584-3.3
AMC7584-5.0
3.267 3.300 3.333
4.950 5.000 5.050
VIN = VOUT + 2V, TA = 25OC
1.238 1.250 1.262
1.230 1.250 1.270
0.005 0.2
Reference
Voltage
AMC7584-ADJ VREF
V
IO = 10 mA to 7A
4V ≤ VIN ≤ 7V
Line Regulation (Note 2)
AMC7584-2.5
VOI
%
VIN = 4V, 10mA ≤ IO ≤ 7A
Load regulation
(Note 2)
AMC7584-3.3
AMC7584-5.0
AMC7584-ADJ
VOL
0.05 0.2
%
V
VIN = VOUT + 2V, 10mA ≤ IO ≤ 7A
IO = 100mA
4V ≤ VIN ≤ 7V
0.010 0.030
1.100 1.300
Dropout Voltage
V
IO = 7A
Quiescent Current
IQ
IADJ
ICL
8
13
mA
4V ≤ VIN ≤ 7V, 100mA ≤ IO ≤ 7A
4V ≤ VIN ≤ 7V, 100mA ≤ IO ≤ 7A
4V ≤ VIN ≤ 7V
Adj pin current
(AMC7584-ADJ only)
50
120
µA
Current Limit
7
8
A
µVRMS
mV/1000hr
dB
Output Noise Voltage (Note 3)
Long Term Stability (Note 3)
Ripple rejection (Note 3)
VO RMS 10HZ – 100kHZ, IO = 5mA
150
20
RR fO = 120HZ, 1VRMS, IO = 100mA
66
Note 2: Line and load regulation is guaranteed up to maximum power dissipation determined by input/output
differential and the output current. However, the maximum power will not be available over the full
input/output voltage range.
Note 3: These parameters, although guaranteed, are not tested in production prior to shipment
Copyright © 2002, ADD Microtech Corp.
4
www.addmtek.com
AMC7584
7A LOW DROPOUT REGULATOR
AMC DOC. #: AMC7584_E (LF)
Feb 2005
APPLICATION INFORMATION:
ꢂ
Thermal Consideration
Maximum Power Calculation:
T
J(MAX) – TA(MAX)
PD(MAX)
=
θJA
TJ(OC): Maximum recommended junction temperature
TA(OC): Ambient temperature of the application
θJA(OC/W):
Junction-to-junction temperature thermal resistance of the package, and other heat dissipating
materials.
The maximum power dissipation of a single-output regulator :
P
D(MAX) = [(VIN(MAX) - VOUT(NOM))] × IOUT(NOM) + VIN(MAX) × IQ
Where: VOUT(NOM) = the nominal output voltage
I
OUT(NOM) = the nominal output current, and
IQ = the quiescent current the regulator consumes at IOUT(MAX)
VIN(MAX) = the maximum input voltage
O
Then
θJA = (150 C – TA) / PD
Thermal consideration:
When power consumption is over about 1.2W( at 70oC ambient temperature), additional heat sink is required to control the
junction temperature below 125 OC.
The junction temperature is: Tj = PD (θJT + θCS + θSA ) + TA
PD:Dissipated power.
θ
JT :Thermal resistance from the junction to the mounting tab of the package.
θCS: Thermal resistance through the interface between the IC and the surface on which it is mounted. (typically,
CS < 1.0°C / W)
θ
θSA:Thermal resistance from the mounting surface to ambient (thermal resistance of the heat sink).
If PC Board copper is going to be used as a heat sink, below table can be used to determine the appropriate size of
copper foil required. For multi-layered PCB, these layers can also be used as a heat sink. They can be connected with
several through hole vias.
59
PCB heat sink size (mm2) 500
45
1000
38
1500
33
2000
27
3000
24
4000
21
5000
PCB θSA (°C / W )
Recommended figure of PCB area used as a heat sink.
through hole vias
(Bottom View)
(Top View)
Copyright © 2002, ADD Microtech Corp.
5
www.addmtek.com
AMC DOC. #: AMC7584_D (LF)
March 2004
AMC7584
7A LOW DROPOUT REGULATOR
3-Pin Plastic TO-220 (T)
INCHES
MILLIMETERS
MIN TYP MAX MIN TYP MAX
E
A
P
F
A
0.140
-
-
-
-
-
-
-
-
0.190 3.56
0.070 1.14
0.045 0.51
0.045 0.30
0.650 14.22
0.420 9.65
0.110 2.29
0.210 4.83
0.055 0.51
0.270 5.84
0.115 2.03
0.580 12.7
0.161 3.53
0.135 2.54
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
4.83
1.78
1.14
1.14
16.51
10.67
2.79
5.33
1.40
6.86
2.92
14.73
4.09
3.43
6.35
SEATING PLAN
Q
b1 0.045
H1
b
c
0.020
0.012
0.560
0.380
0.090
D
D
E
e
L1
e1 0.190
0.020
F
L
H1 0.230
J1 0.080
-
-
-
-
-
-
L
P
0.500
0.139
0.100
-
b1
b
c
J1
e
e1
Q
L1
0.250
-
3-Pin Surface Mount TO-263 (ST)
INCHES
MILLIMETERS
MIN TYP MAX MIN TYP MAX
E
A
A
b
0.160
0.020
-
-
-
0.190 4.06
0.039 0.51
0.055 1.14
-
4.83
0.99
1.40
c2
-
b2 0.045
-
c
0.015 TYP.
0.38 TYP.
D
L
c2 0.045
-
-
-
0.055 1.14
0.380 8.64
0.405 9.65
-
-
1.40
9.65
D
0.340
0.380
L3
E
-
10.29
L1
c
e
0.100 BSC
2.54 BSC
L
0.575
-
-
-
-
0.625 14.61
0.110 2.29
0.115
0.070 1.27
-
-
-
-
15.88
2.79
2.92
1.78
b
e
L1 0.090
b2
L2
-
-
L3 0.050
Copyright © 2002, ADD Microtech Corp.
6
www.addmtek.com
AMC DOC. #: AMC7584_D (LF)
March 2004
AMC7584
7A LOW DROPOUT REGULATOR
IMPORTANT NOTICE
ADD Microtech (ADDM) reserves the right to make changes to its products or to discontinue any integrated circuit
product or service without notice, and advises its customers to obtain the latest version of relevant information to
verify, before placing orders, that the information being relied on is current.
A few applications using integrated circuit products may involve potential risks of death, personal injury, or severe
property or environmental damage. ADDM integrated circuit products are not designed, intended, authorized, or
warranted to be suitable for use in life-support applications, devices or systems or other critical applications. Use of
ADDM products in such applications is understood to be fully at the risk of the customer. In order to minimize
risks associated with the customer’s applications, the customer should provide adequate design and operating
safeguards.
ADDM assumes to no liability to customer product design or application support. ADDM warrants the performance
of its products to the specifications applicable at the time of sale.
U.S.
Asia Pacific region
ADD Microtech Corp
13F, NO. 287, Sec. 3, Nan Jing E. Rd.,
Taipei, Taiwan 105
ADD Microtech Inc.
492 Altamont Drive
Milpitas, CA 95035
TEL: (408) 9410420
FAX: (408) 9410864
TEL: 2-27132800
FAX: 2-27132805
Copyright © 2002, ADD Microtech Corp.
7
www.addmtek.com
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明