AMP-CONNECT [ETC]
; - 12号的铝制车身绘( RAL 7032 )型号: | AMP-CONNECT |
厂家: | ETC |
描述: |
|
文件: | 总132页 (文件大小:14837K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PERSONAL SYSTEMS PRODUCTS
•
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Catalog 889409
Revised 6-1999
Desktop/Deskside
Workstations
Notebook PC’s
PC Servers
Many of the products shown
in this catalog carry one or
more official listings,
AMP and The PC Industry
Please keep in mind that
the part numbers listed in
this catalog are only a
portion of the product part
numbers offered by AMP to
the Computer Industry. For
additional information,
contact the AMP Product
Information Center noted on
this page.
Need more information?
The Computer Industry is
extremely dynamic. Over
the past few years we have
seen tremendous
Call the AMP Product
Information Center:
1-800-522-6752.
recognitions or certifications.
Look for the following logos
throughout the catalog:
The Product Information
Center is staffed with spe-
cialists well versed in all
AMP products. The Center
can provide you with:
■ Engineering Support
■ Catalogs
■ Product Samples
■ Technical Documents
■ AMP Authorized
advancements in both
design and functionality.
This is particularly true in
the Personal Systems
sector, which includes
Desktop and Deskside PCs,
Workstations, Notebook
PCs, and PC Servers. The
typical design life cycle of
these computers is very
short...just ten months from
birth, to life, to death.
Because of this, the
Personal Systems
marketplace has been an
amazing engine of growth
for the worldwide economy
and will continue to be one
far into the future.
Listed by Underwriters
Laboratories for use
R
as Communication Circuit
Accessories.
Recognized under the
R
Component
Recognition Program of
Underwriters Laboratories
Inc.
Distributor Locations
■ AMP FAX Service...
24 Hours a Day
Certified by Canadian
R
Standards Association.
AMP Internet Home Page:
www.amp.com
Produced under a Quality
Management System
certified to ISO 9001.
ISO
A copy of the
certificate is available
9001
Certified
upon request.
At AMP, we have the
products, knowledge, and
services to supply the
needs of the Computer
Industry, and we will
continue to mirror the
Note: The dimensions in this catalog are
for reference purposes only and are
subject to change without notice.
Dimensions are in inches and
millimeters unless otherwise specified.
Customer drawings are available upon
request.
industry’s growth by staying
on the leading edge of
interconnection technology,
the business we have been
in for almost sixty years.
© Copyright 1998 and 1999 by AMP
Incorporated. All Rights Reserved.
Personal Systems
Products
ACTION PIN, AMP, AMP-DUAC,
AMP-DURAGOLD, AMP FAX, AMP-HDI,
AMP-LATCH, AMPLIMITE, AMPMODU,
AMPSLIM, CHAMP, CHAMPOMATOR,
INFOPORT, and MICRO-EDGE are
trademarks.
This catalog contains
interconnection devices
specific to the Personal
Systems Products
Mendocino, Pentium, Pentium II, and
Pentium III, Celeron, and Xeon are
trademarks of Intel Corporation.
IBM is a registered trademark of
International Business Machine
Corporation.
PowerPC is a trademark of IBM
Corporation.
RIMM is a trademark of Rambus Inc.
segments of the Computer
Industry. The catalog is
divided into twelve major
categories. A comprehensive
Quick Reference Guide
found on pages 2 and 3 as
well as the PC and
Motherboard diagrams on
pages 4 and 5 should be a
great help in locating the
right products for your
particular applications. Also,
be sure to take into account
our Value-Added Services
starting on page 6.
Catalog 889409
Revised 6-99
Table of Contents
Quick Reference
Motherboards
2-3
4-5
6-7
Value Added Services
CPU Interconnection
9-16
1
2
Logic Sockets and Programming Devices
Memory
17-22
23-30
3
Expansion Connectors
31-36
4
Power Connectors
37-42
5
Input/Output(I/O) Connectors
Docking Connectors
43-64
6
65-78
7
PC Card/Compact Flash/Smart Card
Wire-to-Board Connectors
Board-to-Board Connectors
Disk Drive/CD-ROM Connectors
Cable Assemblies & Connectors
Numerical Index
79-84
8
85-100
101-114
115-118
119-124
125-127
9
10
11
12
1
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Quick Reference
Market Segment*
Catalog
PCS Page No.
Application
Interconnection Devices
DD
WS
NB
CPU Interconnection
1
PGA ZIF Single Lever (SLZ) Sockets
PGA ZIF Screwdriver Actuated (SAZ) Sockets
PGA LIF Screw Machine Sockets
SC242 Pentium II™ & Pentium III™ 1mm Connectors
Slot 1 Mechanical Support for Pentium II™,
Pentium III™ & Celeron™
SC242 Pentium II™ & Pentium III™ Terminator Card
SC330 Xeon™ 330-Contact Slot Connector
Slot 2 Retention Mechanism
✔
10
11
11
12
✔
✔
✔
✔
✔
12
13
13
14
14
15
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
Slot 2 Terminator
Voltage Regulator Module (VRM Headers & Receptacles)
✔
Logic Sockets &
Programming Devices
2
3
PLCC Sockets, Low Profile Surface Mount
DIP Switches, SPST
Post Shunts
✔
✔
✔
✔
✔
✔
✔
✔
✔
18
18-20
21
Memory
SIMM Sockets with Metal Latches (MICRO-EDGE)
SIMM II Sockets .050 [1.27] Centerline
✔
✔
✔
✔
24
25
DIMM II Sockets for 8 Byte Memory Modules
DIMM Sockets for 0.8mm Centerline SO DIMM
8 Byte M3 Mini Memory Module Sockets
Double Data Rate (DDR) DIMM Sockets
✔
✔
✔
26-27
28
✔
✔
29
✔
✔
✔
✔
✔
✔
29
Rambus RIMM™ Module Sockets (1mm Pitch)
30
Expansion Connectors
4
Standard Edge .050 PCI Connectors
Mini PCI Connectors
Standard Edge II Series Connectors - .100 [2.54]
High Speed Standard Edge Connectors
Card Edge Connectors “Z”
AGP 124 Position 1mm Standard Edge Connector
AGP Universal Connectors
NLX 340 Position 1mm Standard Edge Connectors
✔
✔
✔
32
33
34
34
35
35
35
36
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
Extended NLX Connector
✔
36
Power Connectors
5
6
Top Load Battery Connector
Battery Connectors - 2.5mm/3.0mm Pitch
AMP-DUAC Wire-to-Board Connectors
✔
✔
✔
✔
✔
✔
38
38-40
41
✔
Input/Output (I/O)
Connectors
Subminiature D HDP-22 for Crimp Snap-in Contacts
(AMPLIMITE)
✔
✔
✔
44-45
Subminiature D HDP-22 for Crimp Snap-in Contacts
(AMPLIMITE)
Subminiature D HDP-20 Economy Connectors (AMPLIMITE)
Subminiature D HD-22 Right Angle Posted Connectors
(AMPLIMITE)
✔
✔
✔
✔
✔
✔
46-47
48
✔
✔
✔
49
Subminiature D HD-20 Right Angle Metal Shell Connectors
(AMPLIMITE)
✔
✔
✔
50
Subminiature D Slim Line Two-Row Connectors (AMPLIMITE)
Subminiature D Slim Line Single Row Connectors (AMPLIMITE)
Subminiature D HD-20 Stacked Right Angle Connectors
(AMPLIMITE)
✔
✔
✔
✔
✔
✔
51
51
52-54
54
✔
✔
✔
✔
✔
✔
Subminiature D HD-20 Hi-Rise Connectors (AMPLIMITE)
2
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Quick Reference
Market Segment*
Catalog
PCS Page No.
Application
Interconnection Devices
DD
WS
NB
Input/Output (I/O)
Connectors (continued)
6
7
Subminiature D Connectors HDF-20 for Flat Ribbon Cable
(AMPLIMITE)
✔
✔
✔
55
Subminiature D Connectors Right Angle Posted (AMPLIMITE)
Subminiature D Connectors .050 Series III (AMPLIMITE)
Connector System for IEEE 1394 Serial Bus
Universal Serial Bus (USB) Receptacles & Cable Assemblies
RJ45/USB Stacked Connectors
0.8mm Series Connectors (CHAMP)
.050 Series II Connectors - Wire-to-Board (CHAMP)
Shielded Miniature Circular DIN Receptacles
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
55
56-58
59-60
61
61
62
63
✔
✔
64
Docking Connectors
Board-to-Board SMT 0.6mm Docking Connectors
Board-to-Board SMT 0.8mm Docking Connectors
Board-to-Board Thru-Hole 0.8mm Docking Connectors
1mm Thru-Hole Connectors
.050 [1.27] Thru-Hole Connectors
.050 [1.27] Thru-Hole Connectors (CHAMP)
Hardware - Docking Connectors
✔
✔
✔
✔
✔
✔
✔
66-67
68-69
70-71
72
73-74
75-77
77
PC Card/Compact Flash/
Smart Card
8
9
Card Bus Double Slot Assembly
Compact Flash Card Connectors
Smart Card Connectors
Surface Mount Smart Card
Smart Card Reader
✔
✔
✔
✔
✔
80
81
81-82
83
83
Wire-to-Board
Connectors
FPC Connectors 0.5mm Horizontal SMT
FPC Connectors 1.0mm Horizontal SMT
1.25mm Connectors (AMPSLIM)
Mini CT 1.5mm Connectors
CT 2mm Connectors
FFC Connectors .050 [1.27]
Ribbon Cable Connectors .100 [2.54] (AMP-LATCH)
Accessories - Pull Tabs (AMP-LATCH)
Ultra ATA Connectors .100 [2.54]
Headers - .100 [2.54]
✔
✔
✔
✔
86
87
88
89-94
95
✔
✔
✔
✔
95
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
96
97
97
98-99
Board-to-Board
Connectors
10
0.6mm Free Height (FH) and GIGA SMT Connectors
0.8mm Free Height (FH) Vertical SMT Connectors
1.0mm Free Height (FH) SMT Connectors (IEEE 1396)
.050 [1.27] FH Connectors (CHAMP)
✔
✔
✔
✔
102-104
105-106
107
108
.050 [1.27] Series I Connectors (CHAMP)
Subminiature D Connectors .050 Series I All Plastic
(AMPLIMITE)
System 50 Connectors (AMPMODU)
50/50 Grid Connectors (AMPMODU)
Standard Edge .050 Series PCI Connectors
Standard Edge II Series Connectors .100 [2.54]
✔
✔
✔
✔
109
109
✔
✔
✔
✔
✔
✔
✔
✔
110
111
112
113
✔
✔
Disk Drive/CD-ROM
Connectors
11
.050 Series I Blindmate SCA 2 (CHAMP)
✔
✔
116-117
*Market Segment:
DD - Desktop/Deskside
WS - Workstation
PCS - PC Server
3
Personal Systems Products
www.amp.com
Specifications subject to change
PC Motherboard
4
6
Expansion Connectors
31-36
Input/Output
43-64
CPU
9-16
Disk Drive
115 -118
1
Power
37-42
11
5
Wire-to-Board
85-100
Memory
23-30
9
3
Desktops, desksides, PC servers, workstations, and
notebooks all have one thing in common...
motherboard. Likewise, the interconnections among
these components are laid into the motherboard itself.
AMP supplies all the interconnection devices that make
modern motherboards stand up to the rigors of daily
use. Whether it be CPU, Memory, Expansion,I/O, Disk
Drive/CD-ROM, Power, Docking, Logic/Programming,
PCMCIA, Wire-to-Board, Board-to-Board, or cable
assemblies, AMP has the connection.
a motherboard. The motherboard is the foundation of
any PC. It not only runs the computer, it also manages
all transactions of data between the CPU and the
peripherals. All the critical subsystems, including the
CPU, system chipset, memory, system I/O, expansion
bus, and other critical components run directly off the
4
Personal Systems Products
www.amp.com
Specifications subject to change
Notebook Motherboard
5
7
6
Mini PCI
37-42
Docking Connector
65-78
8
I/O
43-64
Card bus
79-84
6
I/O
43-64
1
CPU
9-16
5
11
6
Battery Connector
37-42
CD ROM
115-118
I/O
43-64
3
Memory
23-30
5
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Value Added Services
From Concept to Design
Reducing your design to a smooth, effective
manufacturable system is our expertise. Front-
end simulation based on accurate models is the
best way to avoid costly, time consuming
design iterations. Our end-to-end system
analysis evaluates reflections, ground bounce,
crosstalk, jitter, propagation delays, timing, and
other critical parameters of your design. Such
comprehensive simulation also allows us to
recommend the most cost-effective way to meet
your performance goals and bring your system
to market on time and on budget.
Signal Integrity Simulation
and Analysis
Analysis can help determine the optimum
device drivers, board design and stackup, and
board layout. Power analysis locates
unacceptable voltage drops that can reduce
noise margins and system reliability. Analysis
also includes thermal and EMI considerations
to ensure signal integrity.
■ Full system simulation
■ Net optimization
■ Skew control
Modeling
■ EMI management
■ Connector models
■ Cable effects
■ PWBs and backplanes
■ Performance validation
Electrical Design & PWB CAD
Power Distribution & Thermal
Management
Mechanical Design
■ Cooper and Chyan Spectra autorouter
■ Rules-driven routing
■ Chassis/enclosure design
■ Tolerance analysis
■ DC power distribution
■ AC input control
■ Design for manufacturability
■ Customer ownership
■ Harness and cabling
■ Manufacturability
■ Thermal analysis
■ Air-mover selection
6
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Value Added Services
From Design to Production
From backplanes through finished enclosures,
we can package your system. As a leading
supplier of high-performance multilayer
backplanes and printed circuit boards, we can
provide you a fast turnaround on prototypes
and manufacture in volume to the highest levels
of quality. And if you need assembled
backplanes, complete enclosures, with power
input and conversion, or other high-level
assemblies, our global manufacturing
capabilities can meet your delivery and volume
needs.
Card Cage Assemblies
Using Bellcore-compliant components,
manufacturing certified to ISO 9001, closed-
loop resource planning, and statistical process
control, we can produce your assemblies on
time and to the highest quality standards.
Continuous inspection - including
■ Air-mover systems
■ DC distribution
■ EMI protection
■ Acoustical treatments
comprehensive final in-circuit testing,
dedicated subsystem Level II testing, and
functional testing - ensures product quality.
Subsystems
■ Cabinets and rack mounts
■ Power input and conversion
■ Full thermal and EMI management
■ Full system interconnection
Connectors/Cables
Backplane, Midplane & Connector Intensive
Assemblies
■ Robust pin and socket design
■ 4 to 30 layers
■ Extended pin options for rear
for rear I/O
■ Press-fit/solder SMT component assembly
■ Rear I/O interface solutions
■ Controlled impedance
■ Bellcore certified
■ Shielded for higher performance and EMI
protection
■ CompactPCI performance matched
■ Sequenced for hot-swap capability
■ Expandable for custom bus applications
■ Bellcore approved versions available
7
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Engineering Notes
8
Personal Systems Products
www.amp.com
Specifications subject to change
Single Lever ZIF (SLZ)
Sockets
Page 10
NEW
1
SC330 (Slot 2) Retention
Mechanism
Page 14
NEW
Screwdriver Actuated
ZIF (SAZ) Sockets
Page 11
SC330 (Slot 2) Terminator
Page 14
Voltage Regulator Module (VRM
Headers and Receptacles)
Page 15
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
CPU Interconnection
PGA Sockets
Socket Patterns
Pattern A
Pattern B
Pattern C
Material and Finish:
Single Lever Actuated
ZIF (SLZ) and Screwdriver Actuated
ZIF (SAZ):
Housing – High temperature
thermoplastic
1
Contacts – Copper alloy, plated
.000030 [0.00076] min. gold over
.000050 [0.00127] min. nickel in contact
area; .000150 [0.00381] min. tin-lead
over .000050 [0.00127] min. nickel in
solder area
19 x 19 Pattern,
321-Positions
Pentium™,
K6-2 & K6-3
Socket 7
19 x 19 Pattern,
370-Positions
Celeron™
17 x 17 Pattern,
288-Positions
PowerPC™
Actuator(SLZ) – Zinc alloy
Low Insertion Force (LIF) - Screw
Machine
Pattern D
Insulator – Glass-filled epoxy
Inner Contact Clip – Beryllium cop-
per, plated 0.00075mm [.000030 in.]
18c gold
Solder Tail – Brass, plated
0.00500mm [.000197 in.] tin-lead over
0.00200mm [.000079 in.] - 0.00300mm
[.000118 in.]
22 x 22 Pattern,
499-Positions
DEC Alpha
Single Lever ZIF (SLZ)
Sockets
Product Facts:
■ Zero insertion force
actuation to facilitate
device socketing
Pattern
Style
Solder Tail
Length
Notes
Part Number
.110
2.79
—
A
A
B
B
B
C
C
C
C
C
C
C
C
C
D
D
916668-1
916668-4
916716-1
916716-2
916716-3
916783-1
916783-2
916783-3
916783-4
916783-5
916783-6
916783-7
916783-8
916783-9
916583-1
916583-2
■ Convenient single lever
(SL) handle operation
requires no tools
.113
2.87
—
—
—
—
—
—
—
.080
2.03
■ Contacts are plated with 30
microinches of gold
.090
2.29
.110
2.79
■ Large funnel entry cavity
.080
2.03
■ Normally closed, full
wiping contacts
.093
2.36
■ Positive detent-locking
lever eliminates
inadvertent opening
.110
2.79
R
R
.080
2.03
1
1
1
2
2
■ Housing design permits the
addition of a heat sink
.093
2.36
.110
2.79
.080
2.103
.093
2.36
.110
2.79
2
.110
2.79
—
.140
3.56
—
Note:
Notes:
BLUE part numbers indicate 2D
geometry and 3D CAD models
that are included on CD-ROM.
1. Contact plating is .000015 [0.00038] min gold in contact area.
2. Contact plating is gold flash in contact area.
10
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
CPU Interconnection
Screwdriver Actuated
ZIF (SAZ) Sockets
Product Facts:
■ Smaller in size than other
ZIF sockets
■ Easy detection of bent IC
pins
Pattern
Style
Solder Tail
Length
Notes
Part Number
1
■ Large funnel entry
.090
B
B
C
1, 2
916732-2
2.29
■ Normally closed contacts
■ Full wiping contacts
.090
2.29
1, 3
1
916769-2
.093
2.36
4-916783-2
■ Actuation accomplished
with flat blade screwdriver
Notes:
1. Low profile
2. Two heat sink latches on each end
3. One heat sink latch on each end
Low Insertion Force
(LIF) Sockets - Screw
Machine
Product Facts:
■ Uses same board area as
PGA substrate
■ Circuit cavity lead-in facili-
tates PGA substrate leads
Pattern
Style
Solder Tail
Length
■ Inner spring contacts
accept .016-.022 [0.40-
0.56] diameter leads or
.0098-.0177 [0.25-0.45]
rectangular pins
Notes
Part Number
.130
3.30
—
B
C
210862-3
.130
3.30
—
799278-3
■ Low profile installed socket
height
Note:
BLUE part numbers indicate 2D
geometry and 3D CAD models
that are included on CD-ROM.
11
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
CPU Interconnection
SC242 (Slot I) Pentium II™
and Pentium III™
242 Position 1mm
Product Facts:
■ Fully compatible with Intel
Pentium II processor
module
Standard Edge Connectors
■ Staggered contact mating
pads for lower card
insertion forces
1
Material and Finish:
Housing – Thermoplastic, brown
Contacts – Phosphor bronze, plated
gold over .000050 [0.00127] min. nickel
in contact area; .000100 [0.00254] min.
tin-lead over 000050 [0.00127] min.
nickel in solder tail area
Solder Tail
Solder Tail
Length
Plating
No. of
Posn.
242
242
242
242
242
242
Part
Number
3.10 [.122]
3.10 [.122]
3.10 [.122]
2.65 [.104]
2.65 [.104]
2.65 [.104]
Gold Flash
145519-1
144519-2
144519-3
145519-4
145519-5
145519-6
Gold Flash over Palladium Nickel
.000015 [0.00038] Gold
Gold Flash
Gold Flash over Palladium Nickel
.000015 [0.00038] Gold
SC242 (Slot I) Mechanical
Support Components for
Pentium II™, Pentium III™
and Celeron™
Universal Retention Module and Heat Sink Support Kit
Product Facts:
■ Folding arms for efficient
packaging and shipping
■ Available with plastic or
screw down fasteners
■ Compatible with SECC &
SECC-2 processor
packages
Material:
Housing – Polycarbonate, UL94V-0,
black
Hardware – Brass, copper alloy
Bridge – Nylon, black
■ Globally tooled
Heat Sink Support
Part Number
Universal Retention Module
Description
Straight plastic pins, .159˝ diameter hole, single piece
Straight plastic pins, .159˝ diameter hole, set of 2 pieces
145417-1
145417-2
#4 screw fastener, .140˝ or .159˝ diameter hole, single piece
145418-1
#4 screw fastener, .140˝ or .159˝ diameter hole, set of 2 pieces 145418-2
Clearance hole for #6 screw, single piece
Clearance hole for #6 screw, set of 2 pieces
Straight plastic pins, .140˝ diameter hole, single piece
Straight plastic pins, .140˝ diameter hole, single piece,
set of 2 pieces
145419-1
145419-2
145420-1
145420-2
Kit-Heat sink support
Kit-Heat sink support base and 2 pins (only)
145308-1
145308-2
Note:
BLUE part numbers indicate 2D
geometry and 3D CAD models
that are included on CD-ROM.
12
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
CPU Interconnection
SC242 (Slot I) Pentium II™
and Pentium III™
Product Facts:
■ Used to terminate unused
slot in multi-processor
Pentium II systems
Terminator Card
Material and Finish:
Housing – Polycarbonate, black
■ 66 MHz and 100 MHz and
133 MHz bus speeds
■ Optional retention latch for
securing card in Slot 1
Retention Mechanism
■ Mates to Slot 1 (1mm)
Standard Edge Connector
1
■ Conforms to Intel enabled
design
Part Numbers
Speed
(MHz)
133
100
66
With Retention
Latch
788555-2
796019-1
796019-2
Without Retention
Latch
788555-1
796019-3
796019-4
SC330 Xeon™ (Slot 2)
330-Contact Slot Connector
Product Facts:
■ .030 [0.762] centerlines
■ Used with PCs, servers and
Material and Finish:
workstations
Materials – High temperature thermo-
plastic which allows wave soldering or
infrared processing.
■ Low printed circuit board
insertion force
Phosphor bronze contacts nickel base
plate; selectively plated gold flash over
palladium nickel in contact area; tin lead
on soldertails
■ Universal metal board lock
■ Post plated solder tails
■ Accepts .062 [1.57] thick
boards
330 Position Vertical Connector Assembly with .115 [2.92]
Solder Tail.
Part No. 767225-2
13
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
CPU Interconnection
SC330 (Slot 2) Retention
Mechanism
Product Facts:
■ Retains Slot 2 processor
cartridge or terminator card
in the 330-Contact Slot
Connector
Material and Finish:
Housing – Polyphenylene sulfide,
94V-0 rated
Contacts – Phosphor bronze, plated
.000200 [0.00508] 93/7 tin-lead per
MIL-T-10727 Type I over .000050
[0.00127] min. nickel per QQ-N-290
■ Use in all servers and
workstations that use the
Intel Xeon™ processor
architecture
1
■ Meets Intel guidelines
■ Design maximizes airflow
and accomodates cooling
fans
■ Low cost solution
■ One retention mechanism
accommodates two
processors
■ Design guides processor
into connector
Description
Part Number
2 [5.08] Centerline
1.89 [48] Centerline
145510-1
145511-1
SC330 (Slot 2) Terminator
Product Facts:
■ Properly terminates the
processor system bus in
the absence of a Slot 2
processor cartridge
Material and Finish:
Printed Circuit Board – Glass fiber
epoxy resin laminated sheet; 1 oz. cop-
per clad both sides, plated .000001
[0.00003] min. gold flash in contact
area over .000050 [0.0127] min. nickel
■ Meets Intel design
guidelines
■ Available with or without
retention housing
Description
Part Number
Without Retention Latch
With Retention Latch
788398-1
788398-2
14
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
CPU Interconnection
Voltage Regulator Module
(VRM Headers and
Receptacles)
Headers
Receptacles
Product Facts:
■ Compatible with the Intel
Voltage Regulator Module
(VRM) as part of the
Flexible Motherboard
concept
■ Available in both 30- and
1
40-position versions
■ Incorporates special board-
locking latches to positively
hold the VRM firmly in
place
Header Detail
■ Mates with receptacles to
to form a connection
system
■ Use in conjunction with SL
ZIF Sockets 8 and dual Slot
1 and Slot 2 applications
Material — Headers:
Housing – Glass filled thermoplastic,
94V-0 rated, off white
Contacts – Copper alloy, plated
.000030 [0.00076] min. gold on mating
area, .000100-.000250 [0.00254-
0.00635] tin-lead on solder posts, with
entire contact underplated .000050
[0.00127] min. nickel
Material — Receptacles:
Housing – Glass filled thermoplastic,
94V-0 rated, off white
Contacts – Copper alloy, plated
.000015 [0.00038] or .000030
[0.00076] min. gold on mating area,
.000050-.000100 [0.00127-0.00254]
tin-lead on solder posts, with entire
contact underplated .000050 [0.00127]
min. nickel
Section ZZ
Part Numbers
Mating Receptacle
Header
Style
No. of
Pos.
Header
Plating A
Plating B
146205-1
146862-11
VRM 7
VRM 8
30
40
532955-5
532956-5
146315-1
147254-12
146761-13
532955-7
532956-7
Plating A: .000015 [0.00038] min. gold
Plating B: .000030 [0.00076] min. gold
1 High temperature
2 ACTION PIN Post
3 Retention post
Note:
BLUE part numbers indicate 2D
geometry and 3D CAD models
that are included on CD-ROM.
15
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Engineering Notes
16
Personal Systems Products
www.amp.com
Specifications subject to change
Post Shunts
Page 21
DIP Switches (7410 Series)
Top Actuated,
2
Auto-Insertable
Through-Hole (SPST)
Page 19
PLCC Sockets
Low Profile, Surface Mount
Page 18
DIP Switches
Single Pole Single Throw
(SPST) - Through-Hole
Page 19
Top Actuated Switches,
Surface Mount with
Strippable Seal
Page 20
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Logic Sockets and Programming Devices
PLCC Sockets
Low Profile, Surface Mount
Product Facts:
■ Low profile — for high
density pc board stacking
■ Compatible footprint allows
for socket or direct
attachment
■ Housing slots except
extraction tool for easy
chip removal
■ Pin 1 indicator and
corner chamfer for chip
orientation
■ High normal force contacts
prevent fretting corrosion
■ Plastic standoffs provide
clearance for heat
dissipation and cleaning
operations
■ Open bottom housing
allows accurate placement
of socket on pattern, and
100% inspection and
repair
2
Material and Finish:
Housing – Polyphenylene sulfide, 40%
glass-filled, 94V-0 rated
Part Numbers
Contacts – Phosphor bronze, plated
.000200 [0.00508] 90/10 tin-lead over
.000050 [0.00127] min. nickel
No. of
Pos.
Without
Locating
Posts
822472-1
822472-2
822472-3
822472-4
822472-5
822472-6
822472-7
Tape Mounted
Without
Locating Posts
3-822472-1
3-822472-2
3-822472-3
3-822472-4
3-822472-5
3-822472-6
3-822472-7
20
28
32
44
52
68
84
Single Pole, Single Throw (SPST)
Product Facts:
DIP Switches
Single Pole Single Throw
(SPST) - Through-Hole
■ Mount directly to pc board
for performance and
economy
■ Can be easily flow, wave
or dip soldered
■ Standard .100 x .300
[2.54 x 7.62] centerline
configuration
Low Profile
Standard Profile
Right Angle
■ Unsealed, sealed and UV
No. of
Switches
Part Numbers - Low Profile Switches
sealed versions available
Unsealed
435668-1
435668-3
435668-5
435668-7
Tape Sealed
2-435668-6
2-435668-4
2-435668-5
2-435668-8
UV Sealed
2-382434-6
2-382434-4
2-382434-5
2-382434-8
2
4
6
8
Material and Finish:
Housing – Glass-filled polyester,
94V-0, black
ISO
9001
Certified
Rocker – Thermoplastic, 94V-0, white
Contacts – Copper alloy, plated
.000030 [0.00076] min. gold over
.000050 [0.00127] min. nickel in con-
tact area, .000150 [0.00381] min. tin-
lead over 000050 [0.00127] min. nickel
on solder legs
No. of
Switches
Part Numbers - Standard Profile Switches
Unsealed
Sealed*
–
UV Sealed
2
2-435640-9
435640-2
435640-4
435640-5
3-435640-3
3-382396-5
3-382396-7
3-382396-9
4
3-435640-5
3-435640-7
3-435640-9
6
8
* Hot melt
No. of
Part Numbers - Right Angle Switches
Switches
Unsealed
1-435802-0
435802-3
435802-5
435802-1
Sealed*
–
1-435802-5
1-435802-7
435802-9
UV Sealed
2
1-435802-3
1-382394-5
1-382394-7
382394-9
4
Note:
6
BLUE part numbers indicate 2D
geometry and 3D CAD models
that are included on CD-ROM.
8
* Hot melt
18
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Logic Sockets and Programming Devices
DIP Switches (7410 Series)
Top Actuated,
Low Profile
Product Facts:
■ Mechanical switches for
digital programming on
printed circuit boards
Auto-Insertable
Through-Hole (SPST)
■ Standard .100 x .300
[2.54 x 7.62] centerline
configuration
■ Auto-insertable
■ 2,000 cycles minimum
2
■ Compatible with Amistar,
Dynapert, Universal and
NETCO insertion machines
■ Low profile and standard
profile available
Material and Finish:
Housing and Actuators – IR
compatible thermoplastic, UL94V-O
rated
Contact and Lead – Copper alloy,
contact plated gold over nickel, lead
plated tin-lead
Standard Profile
No. of
Switches
Part Numbers
Low Profile
390229-21
390228-4
390228-6
—
Standard Profile
390230-2
390230-4
2
4
6
8
390230-6
390230-8
8
—
390231-81
1 With strippable seal
19
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Logic Sockets and Programming Devices
Top Actuated Switches,
Surface Mount with
Strippable Seal
Standard Pitch (.100 [2.54] Centers)
(7400 Series)
Product Facts:
■ Mechanical switches for
digital programming on
printed circuit boards
■ .100 [2.54] x .339 [8.60]
pad centers
■ IR and Vapor Phase
compatible (up to 260˚C for
60 seconds)
■ 2,000 cycles minimum
(Standard Pitch)
1000 cycles minimum
(Half Pitch)
2
Half Pitch (.050 [1.27] Centers)
(7500 Series)
Material and Finish:
Housing and Actuators – IR
and Vapor Phase Compatible
thermoplastic, UL94V-0 rated
Contact and Lead – Copper alloy,
contact plated gold over nickel, lead
plated tin-lead
Part Numbers
No. of
Switches
Standard Pitch
Half Pitch
Tube
Tape &
Reel
Tube
Tape &
Reel
2-390233-2
2-390233-4
2-390233-6
2-390233-8
Loaded
390221-2
390221-4
390221-6
390221-8
Loaded
390233-2
390233-4
390233-6
390233-8
-
2
4
6
8
2-390221-2
2-390221-4
2-390221-6
2-390221-8
20
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Logic Sockets and Programming Devices
.100 [2.54] Centerline, Low Profile
2-Position Economy Shunts
Post Shunts
Product Facts:
■ Post shunts mate with any
common pairs of square,
rectangular and round
posts
Material and Finish:
Housing – Glass-filled thermoplastic,
94V-0, black unless otherwise specified
Contacts – Phosphor bronze, gold
plated as specified below
■ Low-cost means of
manual programming
Strip of 10
■ Post shunts demonstrate
high normal forces for
excellent electrical continuity
Part Numbers
2
Housing
Color
.000030
[0.00076]
Gold Plate
.000015
[0.00038]
Gold Plate
.000005
[0.00012]
Gold Flash
.000100
[0.00254]
Tin Plate
Blue
Black
-
382811-2
382811-6
-
-
2-382811-0
382811-8
382811-5
.100 [2.54] Centerline
Handle Shunts
.100 [2.54] Centerline Low Profile
2-Position Dual Beam Shunts
.100 [2.54] Centerline
Heavy Duty Shunts
Strip of 10
Loose Piece
Strip of 10
Part No. 821942-1
Plating
Part Number
Part Numbers
.000030
[0.00076]
Gold
.000015
Housing Color
.000030
[0.00076]
Gold Plate
390088-3
881545-2
[0.00038]
Gold Plate
Blue
Black
390088-4
390088-2
.000100
[0.00254]
Tin
881545-4
390088-1
2mm Centerline Mini Shunts
.200 [5.08] Centerline
Standard Shunts
Strip of 10
Strip of 10
Plating
Part Number
Plating
Part Number
.000030
[0.00076]
Gold
.000015
[0.000038]
Gold
531230-3
382575-3
.000100
[0.00254]
Tin
.000030
[0.00076]
Gold
531230-1
382575-2
21
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Engineering Notes
22
Personal Systems Products
www.amp.com
Specifications subject to change
Rambus RIMM™
Module Sockets
(1mm Pitch)
Page 30
NEW
3
8 Byte M3 (Mini Memory
Module) Sockets
Page 29
DIMM Sockets for
0.8mm Centerlines (Metric)
Small Outline (SO) DIMM
Page 28
SIMM Sockets with Metal
Latches (MICRO-EDGE)
Page 24
DIMM II Sockets
for 8 Byte Memory Modules
DRAM 3.3 Volts
Page 26
SIMM II Sockets
.050 [1.27] Centerline
Page 25
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Memory
SIMM Sockets with Metal
Latches (MICRO-EDGE)
Vertical Single Row — .050 [1.27] Centerlines
Product Facts:
■ Cam-in design for easy
loading of memory modules
■ Metal latches eliminate
breakage
■ Reliable contact design
for increased durability
■ Heat resistant housings
withstand hostile
Part Numbers
environments
Right
Polarization
Left
No of Pos.
Polarization
■ Designed for robotic
assembly
72
822021-4
822030-3
■ Positive polarization
3
prevents misinsertion
Material and Finish:
Housing – Liquid Crystal Polymer
(LCP), 94V-0 rated
R
R
Vertical Dual Row — .050 [1.27] Centerlines
Contacts – Phosphor bronze, plated
.000200 [0.00508] tin-lead over
.000050 [0.00127] min. nickel in contact
area and .000150 [0.0038] min. tin-lead
over .000050 [0.00127] min. nickel in
solder tail area
Metal Latches — Stainless Steel
.050 x .400 [1.27 x 10.16] Spacing, with Center Post:
72 Positions P/N 822090-4
Low Profile 22° Single Row — .050 [1.27] Centerlines
Part Numbers
Split Retention
Fluted Retention
No of Pos.
Posts
Posts
72
822110-3
822134-3
Note:
BLUE part numbers indicate 2D
geometry and 3D CAD models
that are included on CD-ROM.
24
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Memory
SIMM II Sockets
.050 [1.27] Centerline
Right Angle — 72 Position
Product Facts:
■ Cam-in design for easy
loading of memory modules
■ Accepts module boards in a
thickness range of .074-
.054 [1.19-1.37] to meet
JEDEC standard
■ Polarized posts on socket
allow socket orientation to
pc board
Part Numbers
No. of
Pos.
.160 [4.06] Card Slot
Height
.250 [6.35] Card Slot
Height
■ Pin 1 indicator in the socket
orients the module board to
the socket
Gold Plate
7-382483-2
Tin Plate
Gold Plate
Material and Finish:
72
7-382486-2
7-382487-2
Housing – Liquid Crystal Polymer
(LCP), glass filled, 94V-0 rated
3
■ Anti-overstress latches
prevent breakage from
improper use
■ Center post provides
retention to the pc board
Contacts – Phosphor bronze, plated
.000030 [0.00076] min. thick gold or
.000150 [0.00381] min. thick tin on
mating edge over .000050 [0.00127]
min. thick nickel on entire contact
Metal Latches — Brass, nickel plated
Vertical
R
R
Part Numbers
Left Polarization Right Polarization
No. of
Pos.
72
—
7-382796-2
—
80
8-382700-0
40˚ - 72 Position (Left Polarization, High Key)
Part Numbers
With Center Post
Without Center Post
No. of
Pos.
.095 [2.41]
.155 [3.94]
Post Length
Post Length
72
7-382856-2
7-382927-21
7-382903-22
1 Gold plate
2 Tin Plate
Note:
BLUE part numbers indicate 2D
geometry and 3D CAD models
that are included on CD-ROM.
25
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Memory
168 positions — JEDEC MO-161
DIMM II Sockets
for 8 Byte Memory Modules
DRAM 3.3 Volts
Product Facts:
■ Sockets Dual Read-Out
8-Byte DRAM DIMM
modules or 64-bit data bus
■ Staggered contact heights
reduce module insertion
force
Key #2
Key #1
■ Enhanced built-in lever-type
module extractors
■ Contact performance in
excess of 100 MHz
■ Socket-to-board hold-down
features
Material and Finish:
Housing – High Temperature thermo-
plastic, natural
AA
BB
CC
DD
Contacts – Phosphor bronze, gold
flash over .000015 [0.00038] min. pal-
ladium nickel over .000050 [0.00127]
min. nickel in contact area and .000150
[0.0038] min. tin-lead over .000050
[0.00127] min. nickel in solder tail area
3
Detail
A
Detail
C
Retention Post
AA - CC - DD
AA - CC - DD
BB - CC - DD
AA - CC - DD
Key #1
Detail-C
Detail-A
Detail-C
Detail-C
Key #2
Detail-A
Detail-A
Detail-A
Detail-A
Description
Part Number
390168-1
390168-4
1-390168-4
390240-1
Non-Buffered DRAM, 3.3 Volt, Pre-Plated Contacts
STD DRAM, 3.3 Volt, Pre-Plated Contacts
Non-Buffered DRAM, 3.3 Volt, Pre-Plated Contacts
Non-Buffered DRAM, 3.3 Volt, Pre-Plated Contacts
Note:
BLUE part numbers indicate 2D
geometry and 3D CAD models
that are included on CD-ROM.
26
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Memory
DIMM II Sockets for
100 Positions - Vertical
Material and Finish:
Housing – High Temperature thermo-
plastic, natural
8 Byte Memory Modules
3.3 Volts (Continued)
Contacts – Phosphor bronze, gold
flash over .000015 [0.00038] min. pal-
ladium nickel over .000050 [0.00127]
min. nickel in contact area and .000150
[0.0038] min. tin-lead over .000050
[0.00127] min. nickel in solder tail area
Key #2
Key #1
Key
A
Detail A
Key #1
Key #2
Description
Non-Buffered DRAM, 3.3 Volt,
Pre-Plated Contacts
Part Number
3
Detail - C
Detail - A
390213-1
Key
C
Detail C
Key
B
Detail B
Material and Finish:
Housing and Ejector– High
temperature Nylon
168 Positions - 25˚ Angular
Contacts – Phosphor bronze, plated
gold flash over .000020 [0.000510] min.
thick palladium nickel over .000050
[0.00127] min. thick nickel in contact
area; .000150 [0.00381] min. thick tin-
lead over .000025 [0.00064] min. thick
nickel in solder tail area.
Key #1
Detail - B
Detail - C
Key #2
Detail - A
Detail - A
Description
Sync DRAM, 3.3 Volt
Non-Buffered DRAM, 3.3 Volt
Part Number
390170-6
390170-5
168 Positions DRO Right Angle Part No. 2-390175-6
Note:
BLUE part numbers indicate 2D
geometry and 3D CAD models
that are included on CD-ROM.
27
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Memory
DIMM Sockets for
0.8mm Centerlines (Metric)
Small Outline (SO) DIMM
Product Facts:
144 Position Right Angle Surface Mount for 64-Bit/SDRAM
Modules
■ Sockets dual read-out
SO DIMM modules
■ Cam-in design and
increased lead-in geometry
for easy loading of memory
modules
■ Positive wipe on pads
during module insertion
■ Contact performance in
excess of 100 MHz
■ Module stabilization
Material and Finish:
features
Housing – Nylon, 94V-0 rated
3
■ Right angle design uses
minimum of vertical space
Contacts – Phosphor bronze, plated
0.00025mm [.0000098 in.] min. thick
gold over 0.001mm [.0000393 in.] min.
thick nickel in contact area and gold
flash over 0.001mm [.0000393 in.] min.
thick nickel in soldring area.
Profile
Standard
Low
Part Number
390113-1
390114-1
390112-1
High
144 Position Right Angle Surface Mount for 64-Bit/SGRAM
Modules — 3.3V
Material and Finish:
Housing – Nylon, 94V-0 rated
Contacts – Phosphor bronze, plated
0.00025mm [.0000098 in.] min. thick
gold over 0.0013-0.004mm [.000051-
.000157 in.] min. thick nickel in contact
area and 0.0033-0.0064mm [.000150-
.000250 in.] thick tin-lead over 0.0013-
0.004mm [.000051-.000157 in.] min.
thick nickel in soldring area.
Seating Plane
Part Number
8.00mm [.315 in.]
3.70mm [.146 in.]
390110-1
390111-1
Note:
BLUE part numbers indicate 2D
geometry and 3D CAD models
that are included on CD-ROM.
28
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Memory
8 Byte M3 (Mini Memory
Module) Sockets
Product Facts:
■ 144-position, 0.8mm pitch,
Dual Inline socket
■ Uses a latching mechanism
proven by M3 sockets
■ Compatible with TCP
modules
■ Packaged in semi-hard tray
as standard.
3
Part Numbers
DRAM
Standard
Voltage
A=5.2mm
Low Profile
A=4.0mm
353870-1
353870-2
3.3V
X.XV
353871-1
353871-2
Double Data Rate
(DDR) DIMM Sockets
Product Facts:
■ Accomodates 184 DDR
(Double Data Rate) DIMM
module outline JEDEC
MO-206
■ Vertical socket uses
standard DIMM latches
■ Same size as standard 168
DIMM but with different
footprint
■ Used as main memory in
low-end PCs
Material and Finish:
Housing – Glass-filled high
temperature nylon
■ Preloaded contacts
■ Metal board locks
■ Low cost
Contacts – Phosphor bronze, plated
.000015 [0.00038] min. gold in interface
area; .000150-.000250 [.00381-.00635]
tin-lead in soldertail area; all over
.000050-.000075 nickel underplate
No. of
Pos.
184
Part Numbers
2.5V
390241-1
1.8V
390241-2
29
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Memory
Rambus RIMM™
Module Sockets
(1mm Pitch)
Product Facts:
7.65mm Max.
■ Main memory for PCs,
workstations and servers
■ Typically used in groups of
2 or 3 for main memory
applications
150mm Max.
165mm Max.
■ Meets Rambus connector
specification
(Extractors Open)
■ Accommodates modules
per Rambus specification
■ Rigid soldertails
Material and Finish:
Housing – High temperature thermo-
plastic
■ Metal board locks provide
hold down during soldering
process
3
Contacts – Phosphor bronze
■ Closed bottom housing
■ Right angle design uses
minimum of vertical space
Part Number
Solder Tail
Length
184 Positions
for RIMM & SPRIMM
Modules
168 Positions
for RIMM
Module
■ Meets Rambus inductance
and capacitance
.091
2.30
.110
2.80
.122
3.10
.154
3.90
390217-1
390217-4
390217-2
390217-3
390238-1
390238-4
390238-2
390238-3
specification
■ Stable through both wave
and reflow soldering
process
■ Molded-in identification
■ Visible key feature allows
for enhanced alignment
■ Dual latches provide easy
module removal
Continuity Card
■ Positive latch detent
improves module retention
to the connector
■ 4 leg lengths available
Note:
Dimensions are in millimeters over inches.
30
Personal Systems Products
www.amp.com
Specifications subject to change
NLX 340 Position 1mm
Standard Edge Connectors
Page 36
Standard Edge II Series
Connectors — .100 [2.54]
Centerlines
Page 34
Standard Edge .050 Series
PCI Connectors
Page 32
4
Card Edge Connector “Z”
Page 35
AGP (Accelerated Graphics
Port) 124 Position 1mm
Standard Edge Connectors
Page 35
High Speed Standard Edge
Connectors
Page 34
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Expansion Connectors
Standard Edge .050 Series
PCI Connectors
Product Facts:
■ Supports PCI extension
cards derived from the MC
bus
■ For 3.3 and 5 volt signaling
■ Easy mating of high circuit
count daughterboards
■ Choice of plastic pylons or
metal holddowns
■ 32 and 64 bit connectors
Material and Finish:
Housing – High temperature thermo-
plastic, white
Contacts – Phosphor bronze, duplex
plated gold in contact area, tin-lead on
solder tails
available
■ Polarizing web for positive
board-to-board registration
With 2 Plastic Pylons
4
With 3 Plastic Pylons
With 3 Metal Holddowns
No. of
Dual Pos
Housing
Style
Signaling
(V)
Bit
Count
Part
Number
Notes
60
60
92
92
92
2 Plastic Pylons
2 Plastic Pylons
3 Metal Holddowns
3 Plastic Pylons
3 Plastic Pylons
3.3 & 5
3.3 & 5
5
3.3
5
32 Bit
32 Bit
64 Bit
64 Bit
64 Bit
11299-1
145154-8
145169-4
145165-8
145166-8
3
3
3
Notes:
1. Surface mount version available: Part No. 145098-1
2. .100 [2.54] Solder Tail length
3. .125 [3.17] Solder Tail length
Note:
BLUE part numbers indicate 2D
geometry and 3D CAD models
that are included on CD-ROM.
32
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Expansion Connectors
Mini-PCI Connectors
Type I & II
Connector Assembly, 4H 0.6mm BTB Connector with G-Plate,
Surface Mount - 100 Positions
Material and Finish:
Housing – High temperature thermo-
plastic
Contacts – Copper alloy, plated
0.0002mm min. gold in contact area;
0.00005mm min. gold in signal solder
area; 0.001mm min. tin-lead in ground
solder area; all over 0.0013mm min.
nickel underplate
Receptacle Shown
4
Connector
Type
Plug
Tape
Packaged
353183-8
353190-8
Receptacle
Reference Catalog 889092 for other
Board-to-Board Stacked Heights
Type III
0.8mm Pitch Surface Mount - 124 Positions
Material and Finish:
Housing – High temperature thermo-
plastic, UL94V-0, black
Contacts – Phosphor bronze, plated
gold flash over nickel underplate
Height
4
Part Number
1123992-1
33
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Expansion Connectors
Standard Edge II Series
Connectors — .100 [2.54]
Centerlines
ISA (Industry Standard Architecture)
With Vertical Solder Posts - 98 Positions
Product Facts:
■ High reliability and
economy
■ Selective gold plating of
contacts for high
performance at low cost
■ For flow solder applications
■ Accepts double-sided pc
boards .054-.070 [1.27-
1.78] thick
Solder Posts
Contact
Contact Area
Plating
Gold Flash
Gold Flash
Part
Material and Finish:
Material
Number
440176-1
440176-2
440176-3
440176-4
Housing – Glass-filled polyester, black
Contacts – Phosphor bronze, duplex
plated gold in contact area, tin-lead on
solder tails
Brass
4
Phosphor Bronze
Phosphor Bronze
Phosphor Bronze
Gold Flash/Palladium-NI
Gold Flash
Product Facts:
High Speed Standard Edge
Connectors
■ 1:1 signal to ground ratio
■ Designed for signal
transmissions with rise and
fall times of 0.5
nanoseconds or greater
■ 40 signal/ground pairs per
linear inch
■ Less than 10 picosecond
skew
With 3 Metal Holddowns (Style A)
■ Propagation delay is
typically 75 picoseconds
from motherboard to
daughtercard at the top of
the connector
Material and Finish:
Housing – Polyphenylene sulfide,
brown
Contacts – Phosphor bronze, duplex
plated .000030 [0.00076] min. gold in
contact area, .000100 [0.00254] min.
tin-lead on solder tails, all over .000050
[0.00127] min. nickel underplating
■ 43 ohm impedance
■ Multiple simultaneous
switching:
7% max. @ 0.5 ns
5% max. @ 1.0 ns
■ Staggered contact heights
minimize mating force
With 1 Metal Holddown and 2 Plastic Pylons (Style B)
Housing
Style
Part Numbers
No. of
Dual Pos.
Solder Tail
Length
Through Hole
Surface Mount
73
73
90
100
110
110
120
.100 [2.54]
.090-.110 [2.29-2.79]
.100 [2.54]
.115-.135 [2.92-3.43]
.100 [2.54]
.090-.110 [2.29-2.79]
.100 [2.54]
A
A
A
B
A
A
A
3-145090-7
145236-2
1-145090-7
145244-1
2-145090-5
145236-1
2-145090-9
145064-1
-
-
-
-
-
-
Note:
BLUE part numbers indicate 2D
geometry and 3D CAD models
that are included on CD-ROM.
34
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Expansion Connectors
Card Edge Connector “Z”
Product Facts:
■ High density card edge
connectors used in servers,
work stations and high-end
PCs
No. of
Description
Part Numbers
Pos.
■ Use in high-speed signal
application such as
memory expansion and
high performance and
multiple CPU interface
240
280
360
480
.062 [1.52] Daughter Card
.062 [1.52] Daughter Card
.062 [1.52] Daughter Card
.093 [2.36] Daughter Card
145427-5
145427-9
1-145427-7
2-145400-9
Material and Finish:
Housing – High temperature PPS
Contacts – Phosphor bronze, plated
.000030 [0.00076] gold in
contact area
■ .025 [0.64] centerline
density with .050 [1.27]
daughter card allowance
■ Less than 1% @ 200 pS
cross talk
Metal Holddowns – Brass
■ 1:1 signal ground ratio
■ High density (80 lines/in.)
■ 100 cycles min. durability
4
AGP (Accelerated Graphics
Port) 124 Position 1mm
Standard Edge Connectors
Product Facts:
■ Interconnection for AGP
technology bringing high
performance 3D graphics
and full motion video to the
desktop
■ Through-hole and straddle-
mount versions available
■ Staggered contact mating
pads for lower card
insertion forces
Material and Finish:
Housing – Thermoplastic, brown
Contacts – Phosphor bronze, plated
gold over .000050 [0.00127] min. nick-
el in contact area; .000100 [0.00254]
min. tin-lead over 000050 [0.00127]
min. nickel in solder tail area
Hold Downs – Brass plated .000150
[0.00381] min. tin-lead over .000050
[0.00127] min. nickel
Straddle Mount
Solder Tail
Connector
Style
Solder Tail
Solder Tail
Straddle Mount
Solder Tail
Solder Tail
Notes
Solder Tail
Length
Part
Number
1
1
1
2
2
2.65
3.10
—
2.65
3.10
145518-4
145518-1
145386-1
145518-6
145518-3
Notes:
1- gold flash
2 - .015 plated gold
AGP (Accelerated Graphics
Port) Universal Connectors
Product Facts:
No of
Pos.
Connector
Connector
Solder Tail
Length
Voltage
Part
■ Ideal for high-performance
work stations
Type
Style
Number
132
132
132
180
180
180
172
172
172
172
AGP-UC
AGP-UC
AGP-UC
AGP-PRO:UC
AGP-PRO:UC
AGP-PRO:UC
AGP-PRO
AGP-PRO
AGP-PRO
AGP-PRO
Solder Tail
Solder Tail
Solder Tail
Solder Tail
Solder Tail
Solder Tail
Solder Tail
Solder Tail
Solder Tail
.085 [2.16]
.100 [2.54]
.125 [3.18]
.085 [2.16]
.100 [2.54]
.125 [3.18]
.085 [2.16]
.100 [2.54]]
.125 [3.18]
1.5
1.5
1.5
3.3
3.3
3.3
1.5
1.5
1.5
145376-1
145376-2
145376-3
145209-1
145409-2
145409-3
145410-1
145410-2
145410-3
145387-1
Material and Finish:
Housing – Thermoplastic, brown
Contacts – Phosphor bronze, plated
gold over .000050 [0.00127] min.
nickel in
contact area; .000100 [0.00254] min.
tin-lead over .000050 [0.00127] min.
nickel in solder tail area
■ Simplifies purchasing,
inventory, and manufacturing
for AGP
■ Pivoting board-locks offer
connector centering before
solder tails enter the PCB
Straddle Mount - Available on request
■ Globally tooled
Hold Downs – Brass
35
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Expansion Connectors
NLX 340 Position 1mm
Standard Edge Connectors
Product Facts:
■ Riser Card Interconnect for
new NLX Form Factor
motherboard
■ High temperature housing
suitable for surface mount
reflow processes
■ Worldwide manufacturing
capability
■ Through-hole and straddle-
mount versions available
■ Pivoting board lock feature
offering connector
centering before contacts
enter pc board holes
Material and Finish:
Housing – Thermoplastic, brown
Contacts – Phosphor bronze, plated
.000015 [0.00038] min. gold over
.000050 [0.00127] min. nickel in con-
tact area; .000100 [0.00254] min. tin-
lead over 000050 [0.00127] min. nickel
in solder tail area
Hold Downs – Brass plated .000150
[0.00381] min. tin-lead over .000050
[0.00127] min. nickel
4
■ Staggered contact mating
pads for lower card
insertion forces
Solder Tail
Straddle Mount
Connector
Style
Solder Tail
Solder Tail
Straddle Mount
Solder Tail
Length
.085 [2.16]
.100 [2.54]
–
Part
Number
145275-1
145275-2
145282-1
Extended NLX Connector
Product Facts:
■ One-piece interface for the
NLX Form Factor
Material and Finish:
Housing – Thermoplastic, brown
Contacts – Phosphor bronze, plated
.000015 [0.00038] min. gold over
.000050 [0.00127] min. nickel in contact
area; .000100 [0.00254] min. tin-lead
over .000050 [0.00127] min.nickel in
solder tail area
motherboard
■ Combines the NLX riser
card and 13-position audio
connectors
■ One-piece design enables
superior alignment of riser
card and motherboard
Holddowns – Brass
■ Simplifies purchasing,
inventory and manufacturing
■ Pivoting board locks offer
connector centering before
solder tails enter the
Conncector
Solder Tail
Length
.100 [2.54]
Part
Style
Number
Solder Tail
145428-1
printed circuit board
■ Globally tooled
Note:
BLUE part numbers indicate 2D
geometry and 3D CAD models
that are included on CD-ROM.
36
Personal Systems Products
www.amp.com
Specifications subject to change
AMP-DUAC
Wire-to-Board Connectors
Page 41
Top Load Battery Connector
Page 38
5
Battery Connectors -
2.5mm/ 3.0mm Pitch
Page 38
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Power Connectors
Top Load Battery Connector
Product Facts:
■ Accepts all CR2032 lithium
ion batteries
■ Self-ejecting design allows
battery to be removed
without tools
■ Superior retention to pc
board or to battery
■ Cost effective
■ Surface mount version
available
Description
Part Number
Thru-Hole
Surface Mount
120591-1
796136-1
Material and Finish:
Housing – Thermoplastic, 94V-0, black
Contacts – Phosphor bronze, tin plated
Battery Connectors -
2.5mm/ 3.0mm Pitch
2.5 mm Pitch Connectors
Product Facts:
■ Number of positions
available are at 2.5 mm
pitch, 10 pos. and at
3.0 mm pitch, 8 pos. and
10 pos. Other number of
positions can be offered
upon request
5
■ Housings have an excellent
heat resistant property and
are durable with the
through-hole reflow
techniques
■ Contacts are made of gold
plated high conductivity
copper alloy
10 Position Receptacle Assembly
Material and Finish:
Housing – Thermoplastic, UL 94V-O
rated, black
Contacts –
2.5 mm Pitch: Copper alloy, plated
gold flash over palladium nickel in con-
tact area; plugs are plated tin-lead on
solder area; all over nickel underplate
3.0 mm Pitch: Copper alloy plated
tin-lead on solder area; all over nickel
underplate
■ 2.5 mm pitch plugs are
available with DIP types
and SMT offset types for
thinner equipment.
Receptacles are available
only with SMT types
10 Position Plug Assembly - Offset Type
Note:
10 Position Plug Assembly - (Shown without nut plate)
Note:
BLUE part numbers indicate 2D
geometry and 3D CAD models
that are included on CD-ROM.
See following page for part numbers.
38
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Power Connectors
Battery Connectors -
2.5/3.0 mm Pitch
(continued)
2.5 mm Pitch Connectors (continued)
No. of
Pos.
Part Number
Receptacle
Plug
Description
Plug
1123738-7
1123822-7
1123684-7
Offset
Without Nut Plate
With Nut Plate
10
1123688-7
Keying
3.0 mm Pitch Connectors
Type A
5
Type B
8 Position Receptacle Assembly
Part Numbers
Mount
Type
Housing Key A
Housing Key B
Wire
SMT
DIP
1-316163-1
3-316163-1
5-316163-1
2-316163-1
4-316163-1
6-316163-1
10 Position Receptacle Assembly
Part No. 316435-1
39
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Power Connectors
Battery Connectors -
2.5/3.0 mm Pitch
(continued)
3.0 mm Pitch Connectors (continued)
Keying
Type A
8 Position Receptacle Assembly
Type B
Description
Part Numbers
Housing Key A
Housing Key B
Wire Hex Nut
Without Hex Nut
1-316160-1
3-316160-1
2-316160-1
4-316160-1
5
10 Position Plug Assemblies
Standard
Reverse A
Reverse B
Description
Part Numbers
Standard
Reverse A
Reverse B
316433-3
316433-2
316433-1
40
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Power Connectors
AMP-DUAC
Wire-to-Board Connectors
Vertical Header Assemblies
Product Facts:
■ Wire-to-Board Connector
System
■ Vertical header with
mounting pegs and drain
holes
■ 4.2mm x 4.2mm centerline
■ Receptacle contacts
designed for 26-22 AWG
and 22-18 AWG wire
■ Designed for power
applications
■ Positive latch feature helps
Material and Finish
Housing – Nylon
UL94V-2, Natural color
UL94V-0, White color
Contacts – 0.25 thick copper alloy,
plated tin-lead
prevent disconnection
20 Position Shown
■ Dual action receptacle
contacts
■ Anti-stubbing contact
design
■ Polarized housings
■ Selective loading available
on vertical headers
No. of
Flammability
PCB Pegs
Drain
Notes
Part Number
6
8
UL94V-2
UL94V-2
UL94V-0
UL94V-0
UL94V-2
UL94V-2
Yes
Yes
No
Yes
Yes
No
Yes
Yes
Yes
—
—
—
1
—
—
794304-1
794305-1
794415-1
794444-1
794312-1
794313-1
20
5
20
No
22
Yes
Yes
24
Note:
1. Same as Part No. 794415-1 except pin#19 is omitted and with drain holes.
41
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Engineering Notes
42
Personal Systems Products
www.amp.com
Specifications subject to change
Universal Serial Bus (USB)
Receptacles
Page 61
HD-20 Front Metal Shell,
Right Angle Series II
(AMPLIMITE)
Subminiature D
Stacked Connectors
Page 52 - 54
Subminiature D Connectors
RJ45/USB
Stacked Connectors
Page 61
HDF-20 for Flat Ribbon
Cable (AMPLIMITE)
Page 55
Subminiature D Connectors
HDP-20 for Crimp Snap- In
Contacts (AMPLIMITE)
Page 46 - 47
6
Subminiature D Connectors
HDP-22 for Crimp Snap- In
Contacts (AMPLIMITE)
Page 44 - 45
NEW
PC 99 Compatible Parts
are Available
0.8mm Series Connectors
(CHAMP)
Page 62
Shielded Miniature Circular
DIN Receptacles — Right
Angle Board Mount
Page 64
Connector System for
IEEE 1394 Serial Bus
Page 59-60
Subminiature D Connectors
.050 Series Series III
(AMPLIMITE)
Subminiature D Connectors
HD-22 Right Angle Posted
(AMPLIMITE)
Page 56 - 58
Page 49
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Input/Output (I/O) Connectors
Plug (With Grounding Indents)
Receptacle
Subminiature D Connectors
HDP-22 for Crimp Snap- In
Contacts (AMPLIMITE)
Product Facts:
■ Approximately 66% higher
density than HD-20
Subminiature D connectors
■ Lower cost commercial
version of the military
approved series 90 family
■ Available with shielding
overmold hardware and
shielding enclosure kits
■ Can use numerous standard
HD-20 cable clamps and
mating hardware
■ Low-cost, high performance,
precision-formed crimp
contacts
Part Numbers
Shell
Size
No. of
Pos
.
Plug
Receptacle
748565-1
748566-1
748567-1
748568-1
748569-1
1
2
3
4
5
15
26
44
62
78
748364-1
748365-1
748366-1
748367-1
748368-1
Material:
Shell – Steel, tin plated
Insert – Thermoplastic, 94V-0, black
Contacts/Ferrules – Purchased
separately. See page 45
Note: Plugs accept Size 22 DF pin contacts, and receptacles
■ Intermateable with any size
22 subminiature D
accept Size 22 DF socket contacts.
connector dimensionally
complying with
MIL-C-24308
R
R
R
6
Shielding Hardware Kits —
Receptacles
Shielding Hardware Kits —
Plugs
Each Kit Contains:
■ Connector
Material:
Shell – Steel, tin plated
Insert – Thermoplastic, 94V-0, black
Shields – Steel, tin plated
Contacts/Ferrules – Purchased
separately. See page 45
■ Inner Shield
■ Outer Shield
Kit Numbers
Shell
Size
No. of
Pos.
Plug
Receptacle
1
2
3
4
5
15
26
44
62
78
748468-1
748469-1
748470-1
748471-1
748472-1
748634-1
748635-1
748636-1
748637-1
748638-1
Notes:
1.Plugs accept Size 22 DF pin contacts, and receptacles accept Size 22
DF socket contacts.
2. Components of the kits are shipped unassembled and bulk-packaged
in quantities of 100 pieces.
Note:
BLUE part numbers indicate 2D
geometry and 3D CAD models
that are included on CD-ROM.
44
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Input/Output (I/O) Connectors
Shielding Hardware Enclosure
Kits — Plugs
Shielding Hardware Enclosure
Kits — Receptacles
Subminiature D Connectors
HDP-22 for Crimp Snap- In
Contacts (AMPLIMITE)
(Continued)
Material:
Each Kit Contains:
Shell – Steel, tin plated
Insert – Thermoplastic, 94V-0, black
Shields – Steel, tin plated
Enclosure – PVC, black
Jackscrews – Zinc alloy
Contacts/Ferrules – Purchased
separately. See below
■ Connector
Part Numbers
Receptacle
Shell
Size
1
2
3
No. of
Pos.
■ Inner Shield
■ Outer Shield
■ Enclosure
Plug
15
26
44
62
78
748473-1
748474-1
748475-1
748476-1
748477-1
748639-1
748640-1
748641-1
748642-1
748643-1
4
5
■ Two Jackscrews
Notes:
1.Plugs accept Size 22 DF pin contacts, and
receptacles accept Size 22 DF socket contacts.
2. Components of the kits are shipped unassembled and bulk-packaged
in quantities of 100 pieces.
Crimp, Snap-In Contacts — Precision Formed, Size 22 DF
6
Compatible with:
■ Wire Size 28-22 AWG
[0.4-0.08 mm2]
■ Insulation Diameter .40
[1.02] max.
Material:
Pin Contact – Brass
Socket Contact – Phosphor bronze
Plating:
A. .000030 [0.00076] min. gold on
mating end, tin-lead on crimp barrel, all
nickel underplate
Socket
Pin
B. Gold flash on mating end, tin-lead
on crimp barrel, all nickel underplate
Part Numbers
Pin
Loose
748333-4
748333-7
Plating
Code
Socket
Strip
748333-2
748333-5
Strip
748610-2
748610-5
Loose
748610-4
748610-7
A
B
Note: Strip form contacts shipped 20,000 pieces/reel.
Ferrules — for Shielding Hardware Kits
Shell
Size
Cable
Dia.
Part
Number
Shell
Size
Cable
Dia.
Part
Number
Style
Style
Die Sets:
See Catalog 82068 or contact
the AMP Tooling Assistance
Center at 1-800-722-1111 for
proper die set part numbers
and tooling required to assem-
ble ferrules.
.165-.190
4.19-4.83
.217-.246
5.51-6.25
.284-.324
7.21-8.23
.375-.437
9.53-11.05
.230-.265
5.84-6.73
.375-.432
9.53-10.97
.480-562
12.19-14.28
.190-.217
4.83-5.51
.246-.284
6.25-7.21
.324-.375
8.23-9.53
.400-.460
10.16-11.56
.338-.385
8.59-9.78
.422-.490
10.72-12.45
Stepped
Straight
1-3 Stepped
1-3 Stepped
1-3 Stepped
1-3 Straight
4-5 Stepped
4-5 Stepped
747579-8 1-3 Stepped
747579-8 1-3 Stepped
1-747579-0 1-3 Stepped
1-747579-2 1-3 Straight
1-747580-0 4-5 Stepped
747579-8
1-747579-0
1-747579-1
1-747579-4
747580-8
Material:
747580-4
747580-6
4-5 Stepped
747580-5
Note:
Steel (annealed), tin plated
BLUE part numbers indicate 2D
geometry and 3D CAD models
that are included on CD-ROM.
4
Straight
45
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Input/Output (I/O) Connectors
Plug
Receptacle
Subminiature D Connectors
HDP-20 for Crimp Snap- In
Contacts (AMPLIMITE)
Product Facts:
■ Low cost , commercial
version of the military
approved series
■ Crimp, snap-in contacts
allow loading of only the
number of contacts being
used
■ Available with shielding
hardware and shielding
enclosure kits
■ Numerous cable clamps and
mating hardware options
■ Machine applied
terminations for highest
production rates a lowest
applied cost
■ Intermateable with any size
HD-20 subminiature D
connector dimensionally
complying with
Plug Part No.
Tin Plated Shell
Without With
Grounding Grounding
Indents Indents
Receptacle Part Nos.
Shell No of Mounting
Zinc
Plated
Shell
Zinc
Plated
Shell
Tin
Plated
Shell
Size Pos.
Method
Material:
Shell – Steel, tin or zinc plated
Insert – Thermoplastic, 94V-0, black
Contacts/Ferrules – Purchased
separately. See pages 47 and 45
respectively.
Standard 205204-1 205204-3 205204-4 205203-1 205203-3
Clinch Nut
—
745906-1 745906-2
—
745907-1
1
9
Floating
205434-1
—
—
205439-1
—
Bushing
Standard 205206-1 205206-2 205206-3 205205-1 205205-2
745909-1
2
3
15
25
Clinch Nut
—
745908-1 745908-2
—
745909-2*
Standard 205208-1 207464-1 207464-2 205207-1 207463-1
Clinch Nut 745036-1 745036-3 745036-2 207516-1 207516-3
Floating
MIL-C-24308
205436-1
—
—
205441-1
—
Bushing
6
Standard 205210-1 205210-2 205210-3 205209-1 205209-2
Clinch Nut
—
—
745135-2
—
207661-3
4
5
37
50
Floating
—
—
—
205442-1
—
Bushing
R
R
R
Standard 205212-1 205212-2 205212-3 205211-1 205211-2
Clinch Nut 747883-2 745884-1
—
—
—
*Clinch nut mounting with M-3 threads
Note: Plugs accept size 20 DF pin contacts and receptacles accept size 20 DF socket contacts.
Shielding Hardware Kits —
Receptacles
Shielding Hardware Kits —
Plugs
Cinch Nut
Material:
Each Kit Contains:
Shell – Steel, tin plated
Insert – Thermoplastic, 94V-0, black
Shields – Steel, tin plated
Contacts/Ferrules – Purchased
separately. See pages 47 and 45
respectively.
■ Connector
■ Inner Shield
■ Outer Shield
Recommended
Cable
Max
Mounting
Method
Plug Kit
Receptacle
Shell
Size
No. of
Pos.
Insulation Cable
Dia. Dia.†
Numbers Kit Numbers
.165-.455 .350
Standard
Clinch Nut
747522-1
748526-1
747523-1
748536-1
1
2
3
4
9
4.19-11.56 8.89
.165-.455 .350
4.19-11.56 8.89
Standard
Clinch Nut
747538-1
750636-1
747539-1
787908-1
15
25
37
50
.165-.455 .350
4.16-11.56 8.89
Standard
Clinch Nut
747554-1
—
747555-1
749763-1
.338-.562 .450
8.59-14.28 11.43
Standard
Clinch Nut
747570-1
786929-1
747571-1
—
.338-.480 .450
8.59-12.19 11.43
5
Standard
747577-1
747578-1
Notes:
1.Plugs accept Size 20 DF pin contacts, and receptacles accept Size 20 DF socket contacts.
2. Components of the kits are shipped unassembled and bulk-packaged in quantities of 100 pieces.
† Maximum cable diameter after jacket and braid removed.
Note:
BLUE part numbers indicate 2D
geometry and 3D CAD models
that are included on CD-ROM.
46
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Input/Output (I/O) Connectors
Shielding Hardware Enclosure
Kits — Plugs
Shielding Hardware Enclosure
Kits — Receptacles
Subminiature D Connectors
HDP-20 for Crimp Snap- In
Contacts (AMPLIMITE)
(Continued)
Each Kit Contains:
Material:
■ Connector
Shell – Steel, tin plated
Insert – Thermoplastic, 94V-0, black
Shields – Steel, tin plated
Enclosure – PVC. black
Jackscrews – Zinc alloy
Contacts – Purchased separately.
See below
■ Inner Shield
■ Outer Shield
■ Enclosure
Shell
Size
1
2
3
No. of
Pos.
9
15
25
37
50
Kit Numbers
Receptacle
Plug
747952-1
747954-1
747956-1
747958-1
747960-1
747951-1
747953-1
747955-1
747957-1
747959-1
■ Two Jackscrews
4
5
Notes:
1.Plugs accept Size 20 DF pin contacts, and
receptacles accept Size 20 DF socket contacts.
2. Components of the kits are shipped unassembled and bulk-pack-
aged in quantities of 100 pieces.
6
Crimp, Snap-In Contacts — Precision Formed, Size 20 DF
Contacts with Insulation Support
Material:
Pin Contact – Brass
Insulation
Support
Socket Contact – Phosphor bronze
Plating:
A. Gold flash on mating end, tin lead on
crimp barrel, all nickel underplate
B. .000030 [0.00076] min. gold on
mating end, tin-lead on crimp barrel ter-
mination end, all nickel underplate
C. Gold flash over nickel on entire con-
tact
Wire
Size
Part Numbers
Loose
Ins.
Dia.
Max.
Pl.
Code
Pin
Socket
Pin
AWG
Strip
Strip
Loose
[mm2]
A
B
C
D
A
B
D
A
C
D
A
B
C
D
66507-3
3-66507-0
66507-4
3-66507-1
66682-2
66682-9
66507-9
–
–
–
–
–
–
–
745254-7
–
66506-9
–
66505-3
6-66505-0
66505-4
5-66505-7
66683-2
–
66683-7
745253-2
–
66505-9
–
–
–
–
–
–
–
.040
1.02
Insulation
Support
28-24
0.08-0.2
D. Gold flash on mating end, tin-lead
on termination end, all nickel underplate
.060
1.52
Socket
66682-6
745254-2
745254-3
1-745254-1
66506-3
2-66506-4
66506-4 1-66506-0
26-22 .050
0.15-0.4 1.27
–
–
–
Non-Insulation
Support
66504-3
5-66504-9
66504-4
5-66504-6
66504-9
–
24-20 .060
0.2-0.6 1.52
1-66504-0
–
2-66506-5
–
Pin
Contacts without Insulation Support
Wire
Ins.
Part Numbers
Non-Insulation
Support
Pl.
Code
Size
Pin
Socket
(Strip)
Dia.
AWG
(Strip)
Max.
[mm2]
24-20
0.2-0.6
22-18
.068
1.73
.068
1.73
A
C
C
B
205202-1
205202-6
745229-2
745230-2
–
–
–
Socket
0.4-0.8
1-745229-1
Ferrules for Shielding Hardware
Kits — See page 45
Note:
BLUE part numbers indicate 2D
geometry and 3D CAD models
that are included on CD-ROM.
47
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Input/Output (I/O) Connectors
Front Metal-Shell Cable Connectors
Plugs
Subminiature D Economy
Connectors HDP-20 for
Crimp Snap-In Contacts
(AMPLIMITE)
Product Facts:
■ Economical quality product
■ Flame retardant thermo-
plastic housings, rated up
to 105˚C
■ Duplex plated contacts,
gold-flash on mating end,
tin-lead on crimp end, all
over nickel underplating
■ Available in 9-, 15-, and
25-position plugs and
receptacles
■ Designed to Office Class II
Standards
Material and Finish:
Plugs and Receptacles:
Housing – Thermoplastic, UL94V-0
rated, black
Shell – Steel, plated .000100
[0.00254] min. tin over .000030
[0.00076] min. copper
Receptacles
R
ISO
R
9001
Pin Contacts – Brass, duplex plated
.000001 [0.0000254] min. gold in the
mating area; .000030 [0.00076] min. tin
in termination area; all over .000030
[0.00076] min. nickel underplate
Socket Contacts – Phosphor bronze,
duplex plated .000001 [0.0000254]
min. gold in the mating area; .000030
[0.00076] min. tin in termination area;
all over .000030 [0.00076] min. nickel
underplate
6
Shell
Size
1
2
3
No. of
Part Numbers
Plugs
787341-1
787343-1
787345-1
Positions
Receptacles
787342-1
787344-1
787346-1
9
15
25
Contact Size 20 DF Pin
Diameter .040 [1.02]
Wire Size Range
AWG [mm2]
Ins. Dia.
Max.
.040
1.02
Contact Part Numbers
Pin
Socket
28-24
0.08-0.2
6-66507-2
749564-8
24-20
0.2-0.6
.060
1.52
6-66506-2
7-66504-2
Pin
Socket
48
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Input/Output (I/O) Connectors
Front Metal Shell .350 [8.89] PCB Footprint
Subminiature D Connectors
HD-22 Right Angle Posted
(AMPLIMITE)
Product Facts:
■ Flame retardant
thermoplastic housing
material, UL94V-0 rated
■ Low cost front metal shell
design compatible with full
metal-shell connectors
■ Integral boardlock versions
secure posted connectors to
pc boards prior to soldering
Receptacle
Plug
■ Contacts available in
platings to satisfy different
applications
■ Integral threaded inserts and
screwlocks available
With Boardlocks
Threaded
Shell
Size
1
2
No.
Plating
Code
A
A
Pos.
Inserts
15
26
749767-1
749769-1
Material:
Housing – Thermoplastic, 94V-0,
black
Front Metal-Shells – Steel, tin plated
Contacts – Pins: Brass, Sockets:
Phosphor bronze
3
4
44
62
A
A
749771-1
749639-1
■ Intermateable with any size
HD 20 or 22 subminiature D
connector dimensionally
Notes:
1. All plug connectors are preloaded with size 22 DF posted pin contacts
2. Recommended pc board thickness is .062 [1.58] for connectors with boardlocks and .093
[2.36] max. for all others
complying with MIL-C-24308
Plating:
R
A. .000030 [0.00076] min. gold on
mating end, tin-lead on termination end,
all nickel underplated
B. Gold flash on mating end, tin-lead
on termination end, all nickel underplated
R
Receptacle Part Numbers
With Boardlocks
Shell
Size
No.
Plating
Code
With
PC 99
With Fixed
Female
Screwlocks
787506-1
—
6
Pos.
Threaded
Inserts
1
15
A
B
B
B
A
B
A
B
B
B
B
B
787066-1
787066-2
788740-1*
788624-1*
748390-5
▲
VESA/VGA
—
—
748390-6
1-748390-2
4-748390-2
—
15
1-748390-1
3-748390-8
4-748390-1
11076-3
11076-4**
1-11076-3
1-11076-4***
2
3
4
26
44
62
A
A
A
748481-5
748482-5
748394-5
748481-6
—
748394-6
Notes:
1. All receptacle connectors are preloaded with size 22 DF posted socket contacts
2. Recommended pc board thickness is .062 [1.58] for connectors with boardlocks and .093
[2.36] max. for all others
3. Tail Length .125±.020 [3.18±0.51] except part Nos. 3-748390-8, 4-748390-1 and 4-748390-2 tail
length .085±.010 [2.16±2.54
]
▲ VESA standard 15-position receptacle housing material: Thermoplastic 94V-0 blue.
* Standard temperature
** Short body
***Without screw
Note:
BLUE part numbers indicate 2D
geometry and 3D CAD models
that are included on CD-ROM.
49
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Input/Output (I/O) Connectors
Front Metal Shell, .313 [8.08] PCB Footprint
Subminiature D Connectors
HD-20 Right Angle, Metal
Shell (AMPLIMITE III)
Plugs
With Boardlocks
Shell
Size
No.
Plating
Code
With
With Fixed
Female
Screwlocks
748959-1
748959-2
748961-1
Housings are compatible with standard
wave, vapor phase, infrared reflow and
convection ovens used in Surface
Mount Processing
Pos.
Threaded
Inserts
A
B
A
748879-1
748879-2
748881-1
1
3
9
Plug
25
Material:
Receptacles
Housing – Thermoplastic, 94V-0,
black (Compatible with standard wave
solder, vapor phase. and infra red reflow)
Front Metal-Shells – Steel, tin plated
Contacts – Pins: Brass, Sockets:
Phosphor bronze
With Boardlocks
Shell
Size
No.
Pos.
Plating
Code
With
With Fixed
Female
Threaded
Inserts
Screwlocks
748955-1
748955-2
748956-1
748957-1
748957-2
—
A
B
A
A
B
A
748875-1
748875-2
748876-1
748877-1
748877-2
748878-1
1
9
2
3
15*
25
Plating:
Receptacle
A. .000030 [0.00076] min. gold on
mating end, tin-lead on termination end,
all nickel underplated
B. Gold flash on mating end, tin-lead
on termination end, all nickel underplated
4
37
*15-Pos. Receptacle Part No. 748836-1 without boardlocks, with threaded inserts also
available.
6
Right Angle Posted Connectors
Material:
.318 [8.08] Mount Front Metal Shell
Housing – Thermoplastic, 94V-0,
black (Compatible with standard wave
solder)
Plugs
Front Metal-Shells – Steel, tin plated
Contacts – Pins: Brass, Sockets:
Phosphor bronze
Without Boardlocks
With Boardlocks
Shell No.
Size Pos. Code
Plt.
Fixed
Fixed
PC 99
Thrd.
Inserts
Std.
Thrd.
Inserts
Female
Female
Mtg.
Screwlocks
Screwlocks
Plating:
A
747250-4 747250-6 747840-2 747840-4 747840-6
A. .000030 [0.00076] min. gold on
mating end, tin-lead on termination end,
all nickel underplated
B. Gold flash on mating end, tin-lead
on termination end, all nickel
underplated
1
9
B
B
A
B
A
B
A
–
–
–
–
–
–
–
–
–
–
–
–
747840-3 747840-5
11075-3
11075-4*
–
–
–
Plug
747236-4
–
747238-4
–
747252-4
747841-4 747841-6
747841-3
2
15
–
747842-2 747842-4 747842-6
3
4
25
37
–
–
747842-3 747842-5
747843-4 747843-6
*Without screws
Receptacles
Without Boardlocks
With Boardlocks
Receptacle
Shell No.
Size Pos. Code
Plt.
Fixed
Female
Fixed
Thrd.
Inserts
Std.
Mtg.
Thrd.
Female
Inserts
Screwlocks
Screwlocks
A
745781-4 745781-6 747844-2 747844-4 747844-6
747844-3 747844-5
745782-4 745782-6 747845-2 747845-4 747845-6
747845-3 747845-5
745783-4 745783-6 747846-2 747846-4 747846-6
1
2
9
B
A
B
A
B
A
–
–
–
15
–
–
–
3
4
25
37
745783-3 745783-5
745784-4 745784-6
–
–
–
–
747847-4 747847-6
Note:
BLUE part numbers indicate 2D
geometry and 3D CAD models
that are included on CD-ROM.
50
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Input/Output (I/O) Connectors
Subminiature D Slim Line,
Two-Row Connectors
(AMPLIMITE)
Material and Finish:
Housing – Thermoplastic, UL94V-0
rated, black
9 Position Plug
Part No. 788573-1
Contacts – Phosphor bronze or brass,
plated gold flash on mating area;
.000100 [0.00254] min, tin-lead on sol-
der tail area; all over .000050 [0.00127]
min. nickel underplate
Shell: Low carbon steel, plated nickel
Boardlocks - Brass, plated tin-lead
over nickel underplate
Threaded Inserts: Brass, plated nickel
25 Position Receptacle
Part No. 788575-1
15 Position Receptacle
Part No. 788574-1
Subminiature D Slim Line,
Single Row (9 & 25
Position) Connectors
(AMPLIMITE)
6
Material and Finish:
Housing – Thermoplastic, UL94V-0
rated, black
9 Position Plug
Part No. 788490-1
Contacts – Brass, plated .000015
[0.000038] min. gold on mating area;
.000100 [0.00254] min. tin-lead on sol-
der tail area; all over .000050 [0.00127]
min. nickel underplate
Shell: Low carbon steel, plated nickel
Boardlocks - Brass, plated tin-lead
over nickel underplate
Threaded Inserts: Brass, plated nickel
25 Position Receptacle
Part No. 788489-1
15 Position Receptacle
Part No. 788491-1
51
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Input/Output (I/O) Connectors
HD-20 Front Metal Shell,
Right Angle Series II
(AMPLIMITE)
Subminiature D
Stacked Connectors
Product Facts:
■ Stacked pcb connectors
save board real estate
■ Wide choice of configurations
available
■ Front Metal-Shells for
EMI/RFI shielding
■ Housings made of UL 94V-0
rated thermoplastic
■ Intermateable with other
subminiature D connectors
■ Plug connectors have built-in
grounding indents
■ Choice of 4-40 threaded
insert or female screwlock
mating hardware
■ Configurations available with
boardlocks
Plug over Plug
Receptacle over Receptacle
Receptacle over Receptacle
Part Numbers
With Boardlocks
Shell
Size
No. of
Contact
Positions
With Female
With Threaded
Screwlocks
750586-4
—
Inserts
1
2
9/9
15/15
750585-4
750587-4
750589-61
750589-4
750591-4
Material and Finish:
Front Shells – Steel, tin plated
Brackets – Zinc
Housings – Thermoplastic, 94V-0
rated, black
Eyelets – Brass, tin plated
Threaded Inserts – Zinc, die cast
Boardlocks – Copper alloy, tin-lead
plated
Female Screwlocks – Zinc, die cast
Contacts – Sockets are phosphor
bronze, Pins are copper alloy, duplex
plated .000030 [0.00076] gold on mat-
ing area; tin-lead on termination area;
entire contact nickel underplate
Plating:
3
4
25/25
37/37
750590-6
—
1 1.394 [35.41] high off pc board; all others are 1.244 [31.60] high off pc board
■ Hybrid styles provide
maximum selectivity and
permit mixing of signal
speeds
■ Packaged in plastic trays for
ease of handling
Plug over Plug
Shell No. of Contact Plating
Description
Part Numbers
With Boardlocks
750594-4
788626-1
750598-4
Positions
9/9
9/9
25/25
25/25
Code
Size
1
1
3
3
A
B
A
A
With Female Screwlocks
With Threaded Inserts
With Female Screwlocks
With Threaded Inserts
6
750597-4
A. .000030 [0.00076] min. gold on
mating end, tin-lead on termination end,
all nickel underplated
R
R
B. Gold flash on mating end, 2.03 µm
[.000080] min. tin on soldertails, all over
0.89µm [.000035] min. nickel on entire
contact
Plug over Receptacle
Receptacle over Plug
Receptacle over Plug
Part Numbers
With Boardlocks
With Threaded
Inserts
Shell
Size
No. of
Contact
Positions
Plating
Code
3
25/25
A
750613-4
Plug over Receptacle
Part Numbers
With Boardlocks
With Threaded
Inserts
Shell
Size
No. of
Contact
Positions
Plating
Code
3
25/25
A
750601-4
Notes:
1. All connectors are preloaded with size 20 DF posted contacts
2. Recommended pc board thickness is .062 [1.58] for connectors with boardlocks
and .093 [2.36] max. for all others
3. Male screw retainers are used as mating hardware for connectors with 4-40 female
screwlocks
Note:
BLUE part numbers indicate 2D
geometry and 3D CAD models
that are included on CD-ROM.
52
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Input/Output (I/O) Connectors
9 Position HD-20 Receptacle over
15 Position HD-22 Receptacle
Part No. 788508-1
HD-20 Front Metal Shell,
Right Angle Series II
(AMPLIMITE) Connectors
(Continued)
Material and Finish:
Housings and Pin Spacer – 94V-0
rated, thermoplastic, black
Contacts – Phosphor bronze, duplex
plated .000030 [0.00076] min. gold on
mating end, tin-lead on termination end,
with entire contact nickel underplated
Shell: Steel, tin plated
Eyelets - Brass, plated tin-lead over
copper
Boardlocks: Copper alloy, plated tin-
lead over nickel
Inserts and Brackets: Zinc, clear
chromate plated
25 Position HD-20 Receptacle over
9 Position HD-20 Plug
Part No. 788433-1
6
25 Position HD-20 Receptacle over
50 Position or 68 Position
.050 Series Receptacle
Description
Part Number
786387-1
25 Position Receptacle over
50 Position .050 Series Receptacle
25 Position Receptacle over
68 Position .050 Series Receptacle
788603-1
53
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Input/Output (I/O) Connectors
15 Position HD-20 Receptacle over
3 Position Audio Plug
Subminiature D Stacked
Connectors HD-20 Front
Metal Shell, Right Angle
Series II (AMPLIMITE)
(Continued)
Material and Finish:
Housing – PBT, UL94V-0, black
Contacts – Phosphor bronze, plated
A. .000001 [0.0000254] min. gold
flash on contact area .000100 [0.00254]
min. tin on solder tail area, all over
.000035 [0.00089] min. nickel under-
plate
B. .000010 [.000254] gold flash on
mating area, 3.05µm [.000120] min.
tin-lead on solder tails all over 1.27µm
[.000050] min. nickel
Description
Part Number
PC 99
With screws
440407-1
440407-2
1-440407-1
1-440407-2
With screws & color audio1
—
1
With color coded audio
Without screws
With screws & back cover
With screws
1-440407-3
2-440407-3
3-440407-3
1 Color Coded Audio:
Audio Line In - Light Blue
Audio Line Out - Lime
Microphone - Pink
6
Subminiature D Stacked, 9 Position with 3 Audio Jacks
PC 99
2-440409-2
High-Rise 25 Position HD-20
Receptacle/Over 0
Subminiature D Hi-Rise
Connectors (AMPLIMITE)
Material and Finish:
Housing – PBT, UL94V-0, black
Contacts – Phosphor bronze, plated
A. .000001 [0.0000254] min. gold
flash on contact area .000100 [0.00254]
min. tin on solder tail area, all over
.000035 [0.00089] min. nickel under-
plate
S
B. .000010 [.000254] gold flash on
mating area, 3.05µm [.000120] min.
tin-lead on solder tails all over 1.27µm
[.000050] min. nickel
Dimension S
Plating Code
Part Number
440408-1
PC 99
.228
[5.8]
.228
[5.8]
.228
[5.8]
.228
[5.8]
.228
[5.8]
.228
[5.8]
.228
[5.8]
A
B
B
B
B
B
B
440408-3
1-440408-2*
2-440408-2
1-440408-3**
11048-1***
11048-2
* Screws separate packed
** 10 um gold
*** Without back cover
54
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Input/Output (I/O) Connectors
Plug — Low Profile Metal
Shell
Receptacle — Low Profile
Metal Shell
Subminiature D Connectors
HDF-20 for Flat Ribbon
Cable (AMPLIMITE)
Product Facts:
■ Available in all 5 standard
shell sizes
■ Visual inspection of
termination possible
■ Fluted cover provides
positive alignment of cable
prior to termination
■ Wide range of application
tooling
■ Patented insulation
displacement contact
latches into the connector
cover
■ Contact design provides a
“gas-tight” termination
■ Contacts accept 28 AWG
[0.08mm2] solid and
stranded, and 26 AWG
[0.15mm2] solid and
stranded round conductor flat
ribbon cable on .050 [1.27]
centers
Plug Part Nos.
No. of
With
With
Threaded
Inserts
Material:
Pos. &
Cable
Standard
Stabilizer Mounting
Holes
(Shell Size)
Front Shell – Steel, tin plated
Housing, Cover & Cable Stabilizer–
Thermoplastic, 94V-0, black
9 (1)
15 (2)
25 (3)
37 (4)
50 (5)
747275-4 747306-4
747275-3 747306-3
747275-2 747306-2
747275-1 747306-1
747043-4
747043-3
747043-2
747043-1
746790-1
Threaded Inserts – Brass, unplated
Contacts – Phosphor bronze, duplex
plated .000030 [0.00076] min. gold on
mating end, .000100-.000200 [0.00254-
0.00508] bright tin-lead on termination
end with entire contact underplated
.000050 [0.00127] min. nickel
–
–
Note: All assemblies are supplied with housing and cover pre-assem-
bled. Optional cable stabilizer must be ordered separately.
Receptacle Part Nos.
No. of
Pos. &
(Shell Size)
With
With
Threaded
Inserts
6
Cable
Standard
Stabilizer Mounting
■ Qualified to Battelle Level III
environment
Holes
9 (1)
15 (2)
25 (3)
37 (4)
50 (5)
747275-4 747303-4
747275-3 747303-3
747275-2 747303-2
747275-1 747303-1
747052-4
747052-3
747052-2
747052-1
746789-1
R
R
R
–
–
Note: All assemblies are supplied with housing and cover pre-assem-
bled. Optional cable stabilizer must be ordered separately.
AMPLIMITE 2000 .318 [8.08] PCB Footprint
Subminiature D Connectors
Right Angle Posted
(AMPLIMITE)
Part Numbers
No. of
Pos
Plating
Code
With
With
9 Position Plug
4-40 Inserts1
Female Screwlocks1
A
787203-2
–
–
Material:
9 Plug
B
B
A
B
A
A
B
B
A
787203-32
787203-1
787201-2
787201-1
787201-42
787202-2
–
Housing – Thermoplastic, 94V-0,
black
787650-42
–
–
–
Front Metal-Shells – Steel, plated
.000150 [0.00381] min. tin over
.000100 [0.00254] min. copper
Contacts – Pins: Brass, Sockets:
Phosphor bronze
15 Receptacle
15 Position Receptacle
787652-2
787652-32
–
25 Receptacle
787202-1
787202-42
787652-42
Plating:
1 Solder tail length is .125 [3.18] unless otherwise noted.
2 Solder tail length is .085 [2.16].
A. [.000015] [0.00038] gold on mating
end, tin-lead on solder end, all nickel
underplated
25 Position Receptacle
B. Gold flash on mating end, tin-lead
on solder end, all nickel underplated
Boardlocks and 4-40 Threads –
Steel, integral part of front metal-shell
Female Screwlocks – Zinc, clear
chromate
ISO
9001
R
R
Note:
BLUE part numbers indicate 2D
geometry and 3D CAD models
that are included on CD-ROM.
55
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Input/Output (I/O) Connectors
Right-Angle Receptacle Headers with or without Rails and Latch
Blocks
Subminiature D Connectors
.050 Series Series III
(AMPLIMITE)
Product Facts:
■ Compatible with SCSI-2,
SCSI-3, EIA RS-232, HIPPI,
IPI-2 and IEE 802.3 MII
standards
■ High-density D-type
interface
Without Rails and Latch Blocks
Shown with Boardlocks
With Rails and Latch Blocks
Shown with Boardlocks
■ Tab plug contacts and
tuning fork receptacle
contacts provide reliable
two-point redundancy
■ Vertical and right angle
Part Numbers
Without Rails & Latch Blocks
headers
With Rails & Latch Blocks
■ Rugged die cast back-shell
with excellent EMI/RFI
protection
■ Shields mate before
contacts, with ground
mating first and breaking
last
No. of
Pos.
Without
Boardlocks
.100 [2.54]
Tails
With
Boardlocks
.100 [2.54]
Tails
Without
Boardlocks
With
With
Material:
Housing – Thermoplastic, 94V-0,
black, SMT compatible
Boardlocks
Boardlocks
.120 [3.05]
Tails
.100 [2.54] .100 [2.54]
Tails
–
787169-5
–
Tails
787170-4
787170-5
–
Shell – Steel, plated bright tin over
copper
40
50
50
68
100
–
–
–
787190-5
–
787190-7
–
787171-5
787266-5*
787171-7
–
787362-5
–
Contacts – Phosphor bronze, plated
.000030 [0.00076] min. gold on mating
end, .000120 [0.00305] min. tin-lead
on solder end, all .000050 [0.00127]
min. nickel underplate
787169-7
787169-9
787170-7
787170-9
787362-7
787362-9
■ Board connectors
compatible with standard
thru-hole flow solder and
surface mount reflow solder
practices
* Has 4-40 threaded mating holes for use with female screwlock Part No. 750644-1.
Brackets – Zinc, plated nickel over
copper
Boardlocks – Copper alloy, plated tin-
lead
6
Right-Angle Receptacle Headers without Rails with Latch
Blocks — .100 [2.54] Solder Tails
ISO
9001
R
R
Part Numbers
No. of
Pos.
With
Boardlocks
50
68
787082-5
787082-7
Vertical Receptacle Headers with Rails with Latch Blocks —
.125 [3.18] Solder Tails
Shown with Boardlocks
No. of
Part Numbers
Pos.
40
50
68
749069-4
749069-5
749069-7
Shown with Rails and Latch Blocks
Vertical Receptacle Headers without Rails and Latch Blocks —
.125 [3.18] Solder Tails
No. of
Part Numbers
Pos.
50
68
749070-5
749070-7
Shown without Rails and Latch Blocks
Vertical Receptacle Headers without Rails with Latch Blocks —
.125 [3.18] Solder Tails
No. of
Part Numbers
Pos.
Note:
Shown with Latch Blocks, without Rails
Specifications subject to change
50
68
749721-5
749721-7
BLUE part numbers indicate 2D
geometry and 3D CAD models
that are included on CD-ROM.
56
Personal Systems Products
www.amp.com
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Input/Output (I/O) Connectors
Plug
Cable Plugs and Receptacles — Shielded and Unshielded with
Standard Termination Covers
Subminiature D Connectors
.050 Series Series III
(AMPLIMITE) (Continued)
Part Numbers
Shielded
Plug
Receptacle
Shielded
Assembled Assembled Unassembled
No. of
Pos.
Shown with Covers Assembled
Plug
Material:
Shielded
Assembled
Covers
Unshielded
Housing and Covers – Thermoplastic,
94V-0, black
Unassembled
Covers
Covers
–
749925-3
749925-5
Covers
Covers
749699-4
749699-5
749699-7
–
40
50
68
80
100
–
749621-4
749621-5
749621-7
749621-8
749621-9
–
–
Shell – Steel, plated tin-nickel alloy
over copper (shielded only)
749111-4
749111-6
749210-7
Contacts – Phosphor bronze, plated
.000030 [0.00076] min. gold on mating
end, .000120 [0.00305] min. tin-lead
on solder end, all .000050 [0.00127]
min. nickel underplate
–
–
–
–
–
–
Unshielded
749699-8
Note: Shielded connectors require backshell kits (shown below) for complete assembly.
Shown with Covers Assembled
Receptacle
Shielded
Shown with Covers Assembled
Material:
Backshell Kits with Jackscrews
Backshell – Zinc, plated nickel over
copper
6
Part Numbers
No. of
Strain Relief Staple – Steel, plated
tin over nickel
Jackscrews – Steel, plated black zinc
Jackscrew Caps – Polyolefin or PVC,
black
With Male
Pos.
2-56 Threads
50
100
100
749080-1
749081-1
749854-1*
Straight Exit with Male Jackscrews
*Part No. 749854-1 slightly larger than Part No. 749081-1.
2-56 Screws – Stainless steel
Material:
Backshell Kits with Spring Latches
Backshell – Zinc, plated nickel over
copper
Part Numbers
No. of
Strain Relief Staple – Steel, plated
tin over nickel
Straight
Style A
Straight
Style B
Angled
Latches
Style B
Style A
Pos.
Spring Latches – Stainless steel
2-56 Screws – Stainless steel
40
50
68
68
80
749192-1
749193-2
–
749195-2*
749196-2
–
–
–
749889-3
749202-2
749204-1
749204-2*
–
–
–
–
–
Angled
100
749206-1
*Part Nos. 749195-2 and 749204-2 have larger cable O. D.
Material:
Backshell – Zinc
Shielded Enclosure Kits with Male Jackscrews
Staple – Steel, plated tin over nickel
Boot – PVC, black
Jackscrews – Stainless steel, PVC
Part Number
Enclosure Kit with
Male Jackscrews
No. of
Pos.
68
750752-1
Note: Each enclosure kit contains two backshells, one boot, two jackscrews, one staple
and two 2-56 screws.
Enclosure Kit, Shown Assembled
Note:
BLUE part numbers indicate 2D
geometry and 3D CAD models
that are included on CD-ROM.
57
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Input/Output (I/O) Connectors
Panel Mount Receptacle Assemblies — With Rails and Latch
Blocks
Subminiature D Connectors
.050 Series Series III
(AMPLIMITE) (Continued)
No. of
Pos.
Part Number
With Assembled Covers
Receptacle with Rails
and Latch Blocks
50
68
749611-5
749611-7
Material:
Housing and Termination Covers –
Thermoplastic, 94V-0, black
Shell – Steel, plated bright tin over
over copper
Bracket – Zinc, plated nickel over
copper
Panel Mount Receptacle Assemblies — Without Rails, with
Latch Blocks
Contacts – Phosphor bronze, plated
.000030 [0.00076] min. gold on mating
end, .000050 [0.00127] min. tin-lead
on termination end, all .000050
[0.00127] min. nickel underplate
No. of
Pos.
50
68
Part Number
With Assembled Covers
749656-5
749656-7
Receptacle without Rails
with Latch Blocks
Panel Mount Receptacle Assemblies — Without Rails, with
Latch Blocks for .025 [0.64] Centerline Ribbon Cable
No. of
Pos.
50
68
Part Number
With Assembled Covers
Receptacle without Rails
with Latch Blocks
786161-5
786161-7
6
Plug and Receptacle Assemblies — for .025 [0.64] Centerline
Ribbon Cable
Part Numbers
Plug
No. of
Pos.
Plugs with
Assembled Covers
(Plastic)
Receptacles with
Assembled Covers
(Metal)
50
68
786090-5
786090-7*
–
786096-7
*Part No. 787514-7, 68-Position Plug (Plastic) for use with the R-CAM 4B termination
machine also available.
Receptacle without Rails and Latch
Blocks
Note:
BLUE part numbers indicate 2D
geometry and 3D CAD models
that are included on CD-ROM.
58
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Input/Output (I/O) Connectors
4 Position Receptacle Headers
Connector System for
IEEE 1394 Serial Bus
Product Facts:
■ Conforms to IEEE 1394
DIP Type, M1.6 TAP
Panel Mount with Boss (Pattern B)
standard (4 pos., 6 pos.)
■ Easy connections to
equipment (4 pos., 6 pos.)
■ For use with plug and play
devices
■ Applicable to wide ranges
of connections (4 pos., 6
pos.)
The IEEE 1394 serial bus can be used
as a low cost, high speed way to
interconnect peripheral devices. This
product has been implemented in
applications connecting video cameras
to PC’s and set top boxes for home
entertainment systems.
■ For 0.8 mm and 1.6 mm
thick pc boards (4 pos.)
■ Panel mounting screw
thread sizes of PC board
side are of M1.6 and M2.1
(4 pos.)
■ DIP types, and SMT types
are available for PC board
side (4 pos., 6 pos.)
SMT Type, M1.6 and M2.6
Panel Mount
■ Applicable for automatic
mounting machines with
embossed tapes (4 pos.)
■ FPC is also applicable to
the 4 position connectors
Material and Finish:
Housing – 6T Nylon, UL94V-0 rated,
black
Contact – Copper alloy, plated gold
with nickel underplate
Front Shell – Brass, plated tin-lead,
black
6
Back Shell – Phosphor bronze, plated
tin-lead
Type
Solder Tail
Length (mm)
Boss
Receptacle
Part No.
Emboss Tape
Part No.
DIP M1.6 TAP
DIP M1.6 TAP
SMT M1.6 TAP
SMT M2.6 TAP
2
3.85
–
with
with
with
353388-1
1123843-1
1381141-1
1318140-1
1318138-1
–
1318142-1
–
–
without
Plug Kit - Part No. 353455-1
Material and Finish:
Bushing – PVC, black
Covers – PBT, UL94V-0 rated, black
Lower Shield Case – Brass, plated
tin-lead
Upper Shield Case – Brass, pre-tin
plated
Contact – Brass, plated 0.0003mm min.
gold over 0.00127mm min. nickel
59
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Input/Output (I/O) Connectors
Cable Assemblies - 4 Pos. to 4 Pos.
Connectors System for
IEEE 1394 Serial Bus
(Continued)
L (m)
Part No.
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
0-1123076-5
1-1123076-0
1-1123076-5
2-1123076-0
2-1123076-5
3-1123076-0
3-1123076-5
4-1123076-0
4-1123076-5
6 Position Receptacle Headers
Flag Type, Thru-Hole
Top Shell
Description
Part No.
Flag Receptacle
Plug Kit (Unassembled)
787956-1
787950-1
6
Bottom Shell
Plug Kit – Unassembled
6 Position Cable Assemblies
Base Part Numbers:
278753
278756
60
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Input/Output (I/O) Connectors
Series A, Right Angle, 4-
Position, Through-Hole —
Stacked
Universal Serial Bus (USB)
Receptacles
Series A, Right Angle, 4-
Position, Through-Hole —
Single
Product Facts:
■ Plug and play capability
■ Hot pluggable
■ Single 4-postion connector
polarized for proper
orientation
■ Consolidates serial,
parallel, keyboard, mouse
and game ports
■ Compatible with asynchro-
nous and isochronous data
transfer methods
■ Compatible with Windows
95 and Windows NT
operating systems
Part No. 787616-1
(Solder Tail Length: .112 [2.84])
Part No. 787617-1
(Solder Tail Length: .112 [2.84])
■ User-friendly flexibility
Series B, Vertical, 4-Position,
Through-Hole — Single
Series B, Right Angle, 4-
Position, Through-Hole —
Single
■ Broad industry support from
consortium of computer and
peripheral equipment
manufacturers
Material and Finish:
Housings – LCP, 94V-0, natural
Shell – Copper alloy, plated .197
[0.005] min. bright tin over .010
[0.0025] min. copper
Contacts – Copper alloy, plated
.000003 [0.000076] min. gold over
.000030 [0.00076] min. palladium-
nickel on mating end, .0015 [0.38] min.
tin-lead on solder tails, all over .000050
[0.00127] min. nickel underplate
USB Cable Assemblies
6
Part No. 787834-1
(Solder Tail Length: .119 [3.01])
Part No. 787780-1
(Solder Tail Length: .119 [3.01])
Base Part Numbers: 621745 to
621747, 621772 to 621776,
636315
Product Facts:
RJ45/USB
Stacked Connectors
■ One connector provides
interconnection for both a
stacked USB and and RJ45
modular jack
■ Available with or without
LEDs
■ Fully shielded
■ Available in high volumes
■ Competitively priced
■ Line conditioning (media
filter) available for RJ-45
Contact AMP
Material and Finish:
Housing – Thermoplastic 94V-0, black
Contacts – Phosphor bronze, plated
.000050 [0.00127] gold (RJ45) and
copper alloy, plated .000030 [0.00076]
gold (USB) in mating area; tin-lead in
solder area; all over nickel underplate
Description
Part No.
R
R
Without LED’s
With LED’s
1116151-1
1116151-2
Note:
BLUE part numbers indicate 2D
geometry and 3D CAD models
that are included on CD-ROM.
61
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Input/Output (I/O) Connectors
Receptacle Assembly — High Profile, Shielded, Right-Angle
with Through-Hole Leads
0.8mm Series Connectors
(CHAMP)
Product Facts:
■ EMI shielded high density
and low profile I/O system
■ Precision insert molded
contacts on 0.8mm center-
lines offer 30% linear pc
board space savings
■ Low profile, right-angle pc
connector, 5.0mm high —
a 50% reduction in height
68-Position – Part No. 796055-1
Screwlock – Part No. 787004-3
(Screwlock - Bulk Packaged/200)
■ Contact tips recessed for
ESD and damage protection
Boardlocks – Brass, plated 0.00375mm
min. bright tin-lead over 0.00127mm
min. nickel
Contacts – Phosphor bronze, duplex
plated 0.000076mm min. gold over
0.00076mm min. palladium-nickel on
mating end, 0.00375mm min. bright
tin-lead on solder end, all over
0.00127mm min. nickel underplate
Material:
■ Contacts are insulation
displacement (IDC) and can
be quickly terminated by the
CHAMPOMATOR 2.5 semi-
automatic termination
machine
■ Metal-shell backshell kits
feature integral cable braid
termination
Housing and Pin Spacer –
Thermoplastic, 94V-0, black, SMT com-
patible
Inserts – Thermoplastic, 94V-0, natur-
al, SMT compatible
Shell – Steel, plated 0.00500mm min.
bright tin over 0.00250mm min. copper
Material and Finish:
Plug Kit — Unassembled, Shielded Cable Connector
Housing – LCP, 94V-0, natural
Termination Covers – LCP, 94V-0,
natural
ISO
6
9001
Certified
Shell – Carbon steel, plated 0.00508mm
min. tin-lead over 0.00127mm min.
copper
Contacts – Phosphor bronze,
AMP-DURAGOLD plated 0.000076mm
min. gold on mating end, 0.00127mm
min. tin-lead on solder end, all over
0.00127mm min. nickel underplate
68 Position Backshell Kit
(Unassembled)
68-Position – Part No. 787131-3
Material and Finish:
Backshells – Zinc, plated 0.00254mm
min.nickel over 0.00508mm min. copper
Strain Relief – Carbon steel, plated
0.00127mm min. bright tin-lead over
0.00127mm min. nickel
Plug Kit — Unassembled, Shielded Cable Offset Cable Connector
68 Position Backshell Kit with
Jackscrew Fastener
Screws – Stainless steel
Material and Finish:
Housing – Steel, plated 0.005mm min.
bright tin-lead over 0.0025mm min. cop-
per
Jackscrews – Steel, plated blue chro-
mate over zinc
Jackscrew Head – ABS/PC, black
Jackscrew Covers – ABS/PC alloy,
black, 94V-0
68-Position – Part No. 787775-1
Receptacle Assembly — Stacked, Right Angle
Part No. 787191-1
68-Position – Part No. 787962-1
www.amp.com
(Bulk Packaged/200)
Part No. 788362-1
62
Personal Systems Products
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Input/Output (I/O) Connectors
Receptacles, Right-Angle and Vertical/Cable Plug and Enclosure
.050 Series II Connectors —
Wire-to-Board (CHAMP)
Product Facts:
■ Cable plug connectors
terminate 28-30 AWG
[.08-.09mm2] wire
■ 180° and 75° cable exit
Right-Angle Receptacle
Vertical Receptacle
■ Pc board mounting
receptacles with rugged
zinc die-cast body and
stamped metal shield
68 Positions
■ Double-spring contact
design to ensure intrermate-
ability and conformance to
standards
Material — Connectors:
Receptacle Housing – Glass-filled
nylon, 94V-0, black
Retention Leg – Phosphor bronze,
plated tin over nickel
Right-Angle Receptacle
26, 36 & 50 Positions
Shield – Steel, plated nickel over
copper
Frame – Die-cast zinc, plated nickel
Cable Plug Housing – Glass-filled
PBT, 94V-0, black
Contacts – Phosphor bronze,
selectively plated .000030 [0.000076]
min. gold on mating end, tin-lead on
termination end
6
Cable Plug
Plug Enclosure Kit
Material — Enclosure Kits:
Enclosure–PBT, 94V-0, beige white
Shield–Steel, plated nickel over copper
Locking Spring–Stainless Steel, over-
molded with PBT, 94V-0 rated, beige
white
Part Numbers
No. of
Pos.
Cable
Plugs
Enclosure
Kits
Receptacles
Right-Angle
2-917738-4
2-917738-5
2-917738-7
2-178238-8
Vertical
26
36
50
68
2-175887-4
2-175887-5
2-175887-7
2-175887-8
2-175677-4
2-175677-5
2-175677-7
2-175677-8
176793-4
176793-5
176793-7
176793-8
Plug Wire Accommodation:
28AWG [0.09mm ] 7 strand with .020-
7 strand with .020-.028 [0.508-0.71]
ins. dia. Most UL Type 2789 wire meets
these dimensional requirements.
2
.028 [0.51-0.71]* ins. dia., 28AWG
2
[0.08mm ] SCSI with .028-.035 [0.71-
2
0.89] ins. dia., and 30Awg [0.05mm ]
Note:
BLUE part numbers indicate 2D
geometry and 3D CAD models
that are included on CD-ROM.
63
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Input/Output (I/O) Connectors
Shielded Miniature Circular
DIN Receptacles — Right
Angle Board Mount
Standard Thru-Hole Version
Stacked Thru-Hole Version
Part Numbers
No. of
Pos.
Housing
Configuration
Plating
Code
With
Without
Hold Down
749266-1
788506-1
–
PC 99
Hold Down
749180-1
84376-1
786766-1
749179-1
6
7
Standard
Stacked
Standard
Standard
Stacked
Stacked
Stacked
A
B
A
A
B
B
B
8
6
6
6
749267-1
Material and Finish:
Housing – Thermoplastic, 94V-0 rated,
black
440173-3
440173-4*
440173-5**
Shield – Copper alloy, plated .000100
[0.00254] min. tin-lead over .000030
[0.00076] min. nickel
*Without ground panel
**With mounting hole
Contacts – Phosphor bronze, plated
A. .000030 [0.00076] min. gold in
mating area, .000120 [0.00305] min.
tin-lead on solder tails, all over .000050
[0.00127] min. nickel underplate
B. 0.38µm [.000015] min. gold on
mating area, 3.05µm [.000120] min.
tin-lead on solder tails all over 1.27µm
[.000050] min. nickel
6
Note:
BLUE part numbers indicate 2D
geometry and 3D CAD models
that are included on CD-ROM.
64
Personal Systems Products
www.amp.com
Specifications subject to change
Board-to-Board Surface
Mount 0.6mm Pitch
Docking Connectors -
Vertical Mount
Page 66 - 67
Thru-Hole Connectors
Page 72 -77
7
Board-to-Board
0.8mm Pitch
Docking Connectors
Page 68 - 71
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Docking Connectors
Board-to-Board Surface
Mount 0.6mm Pitch
Docking Connectors -
Vertical Mount
132 Position Receptacle Assemblies
Product Facts:
■ Up to 2000 mating/
unmating cycles
■ Hot pluggable. Grounders
at both sides of the
connector mate first, then
signals in sequence
■ Available in 132 and 140
position versions
Type: 5.85mm Height
Material and Finish:
Housing – Thermoplastic, 94V-O
rated, white
Contacts – Copper alloy, plated
palladium nickel and gold on contact
area; tin-lead on solder area; nickel
underplate overall
Shell - Steel, nickel plated
Guide Socket - Brass, nickel plated
H
A
Type: 8.0mm and 9.2mm Heights
7
Tray
Type
Height
(mm)
Dimensions (mm)
Part Numbers
Receptacle
A
H
Mating Plug(s)
1-1123318-1
353327-1
5.85
—
—
1-1123846-2
Hard
8.0
9.2
8.0
9.2
3.8
5.0
353324-1
1-1123315-1
1-1123318-1
1-1123318-1
66
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Docking Connectors
Board-to-Board Surface
Mount 0.6mm Pitch
132 Position Plug Assemblies
Docking Connectors -
Vertical Mount (Continued)
132 Position
Part Numbers
Mating Receptacle
Tray
Type
Plug
Hard
Soft
1-1123318-1
353327-1
353324-1
1-1123315-1
1-1123846-1
140 Position Receptacle Assembly
7
140 Position Plug Assembly
140 Position
Part Numbers
Tray
Type
Receptacle
Plug
Hard
1-1123316-1
1-1123319-1
67
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Docking Connectors
Board-to-Board
0.8mm Pitch
Docking Connectors
100 Position, Surface Mount, Vertical Receptacle Assembly
Product Facts:
■ Up to 5000 mating/unmating
cycles
■ Sliding tine plate allows
high density, high reliability
mountings
■ Vertical and horizontal
mounting available
Material and Finish:
Surface Mount Connectors:
Housing – Thermoplastic, 94V-O
rated, white
100 Position, Surface Mount, Vertical Plug Assembly
Contacts – Copper alloy, plated
palladium nickel and gold on contact
area; tin-lead on solder area; nickel
underplate overall
Shell - Steel, nickel plated
Guide Socket - Brass, nickel plated
7
Part Numbers
Receptacle
316418-1
Guide Socket
316427-1
Plug
Guide Pin
316429-1
316422-1
68
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Docking Connectors
Board-to-Board
0.8 mm Pitch
160 Position, Surface Mount, Vertical Receptacle Assembly
Docking Connectors
(Continued)
Material and Finish:
Housing – Thermoplastic, UL94V-O
rated, black
Contacts – Beryllium copper, plated
gold over palladium nickel on mating
end; tin-lead on solder end; all over
nickel underplate
Shell - Carbon steel, plated nickel over
copper
Boardlocks - Phosphor bronze, plated
tin-lead over nickel
7
160 Position, Surface Mount, Vertical Plug Assembly
Material and Finish:
Housing – Thermoplastic, UL94V-O
rated, black
Contacts – Brass, plated gold over
palladium nickel on mating end; tin-
lead on solder end; all over nickel
underplate
Connector Type
Part Number
Shell - Carbon steel, plated nickel over
copper
Receptacle
Plug
368751-1
368756-1
Boardlocks - Phosphor bronze, plated
tin-lead over nickel
69
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Docking Connectors
Board-to-Board
0.8 mm Pitch
240 Position, Thru-Hole, Vertical Receptacle Assembly
Docking Connectors
(Continued)
Material and Finish:
Housing – Thermoplastic, UL94V-O
rated, black
Contacts – Copper alloy, plated
palladium nickel and gold on contact
area; tin-lead on solder area; nickel
underplate overall; ground contacts tin-
lead plated over nickel underplate
Shell - Stainless steel (Receptacle);
nickel plated (Plug)
Tine Plate - Thermoplastic, UL94V-O
rated, black
Drain Wire (Plug) - Stainless steel
240 Position, Thru-Hole, Vertical Plug Assembly
7
Part Numbers
Plug
w/o SIF
Receptacle
Guide Pin
SIF
Guide Socket
0-1123608-1
0-1123616-1
0-1123599-1 0-1123599-2 0-1123607-1
70
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Docking Connectors
Board-to-Board
0.8 mm Pitch
240 Position, Thru-Hole, Vertical Receptacle Assembly
Docking Connectors
(Continued)
Material and Finish:
Housing – Thermoplastic, UL94V-O
rated, black
Contacts – Copper alloy, plated
palladium nickel and gold on contact
area; tin-lead on soldering area; nickel
underplate all over
Shell - Steel, nickel, copper and tin
plated
Guide Plate Tine Plate - UL94V-O
rated thermoplastic, black
Nut - Brass
Retention Leg - Brass, tin-lead and
nickel plate
240 Position, Thru-Hole, Horizontal Plug Assembly
with Retention Leg
240 Position, Thru-Hole, Horizontal Receptacle Assembly
with Retention Leg
7
Part Numbers
Receptacles
Plug
Horizontal
353952-1
Vertical
353960-1
Guide Pin
353966-1
Horizontal
353967-1
Guide Pin
1123441-1
71
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Docking Connectors
1mm Thru-Hole Connectors
168 Position, Right Angle Receptacle with Retention Legs
and Drain Wire
Material and Finish:
Housing – Liquid Crystal Polymer
Contacts – Copper alloy, plated gold
in contact area; tin over nickel in solder
area
Tine Plate - Liquid Crystal polymer
Shell - Steel, nickel plated
Retention Leg - Brass, tin-lead plated
Drain Wire (Receptacle) - Stainless
steel
168 Position, Right Angle Plug with Retention Legs,
without Drain Wire
7
168 Position, Vertical Plug with Retention Legs,
without Drain Wire
Connector
Type
Part
Style
Number
Receptacle
Plug
Plug
Right Angle
Right Angle
Vertical
1-11313-4
1-11314-4
1-11315-4
72
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Docking Connectors
.050 [1.27] Thru-Hole
Connectors
72 Position, Right Angle Receptacles with Retention Legs
Material and Finish:
Housing – Liquid Crystal Polymer
Contacts – Copper alloy, plated gold
in contact area; tin-lead in solder area;
all over nickel underplate
Tine Plate - Liquid Crystal Polymer
Shell - Steel, plated nickel
Retention Leg (Right Angle Only)
- Brass, plated tin-lead
Guide Socket (Receptacles) - Steel
or brass, plated nickel
Guide Pin (Plugs) - Steel or brass,
plated nickel
72 Position, Right Angle Plugs with Retention Legs
7
72 Position, Vertical Plug without Retention Legs
Guide Pin
Material
Connector
Style
Part Numbers
Receptacle
Plug
Steel
Brass
—
Right Angle
Right Angle
Vertical
179135-1
179136-1
—
179139-1
179141-1
0-353902-2
Note:
BLUE part numbers indicate 2D
geometry and 3D CAD models
that are included on CD-ROM.
73
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Docking Connectors
.050 [1.27] Thru-Hole
Connectors (Continued)
160 Position, Right Angle Receptacles with Retention Legs
Material and Finish:
Housing – Liquid Crystal Polymer
Contacts – Copper alloy, plated gold
in contact area; tin lead in solder area;
all over nickel underplate
Tine Plate - Liquid Crystal Polymer
Shell - Steel, plated nickel
Retention Leg - Brass, plated tin-lead
Guide Socket/Pin - Brass, plated
nickel
Ground Plate - Stainless steel
160 Position, Right Angle Plugs with Retention Legs
7
Part Numbers
Description1
Receptacle
917042-4
917043-4
917301-42
Plug
With Guide Socket/Pin
Without Guide Socket/Pin
With Guide Socket/Pin
917044-4
917045-4
917302-43
1 Guide sockets are used with receptacles and guide pins are used with plugs
2 Uses guide socket Part No. 177728-2
3 Uses guide pin Part No. 177734-4
Note:
BLUE part numbers indicate 2D
geometry and 3D CAD models
that are included on CD-ROM.
74
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Docking Connectors
.050 [1.27] Thru-Hole
Connectors (CHAMP)
200 Position, Right Angle Receptacles with Retention Legs
Material and Finish:
Housing and Tine Plate - Polyester,
natural
Contacts – Copper alloy, plated
.000030 [0.00076] min. gold on mating
area; .000100 [0.00254] min. tin-lead
on solder area; all over .000050
[0.00127] min. nickel underplate
Shell - Carbon steel, plated nickel over
copper
G-Plate - Stainless steel
Guide Socket - Brass, plated nickel
over copper
Retention Leg - Brass, plated tin-lead
over nickel
7
200 Position, Right Angle Plug
Material and Finish:
Housing and Tine Plate - Polyester,
natural
Contacts – Copper alloy, plated
.000030 [0.00076] min. gold on mating
area; .000100 [0.00254] min. tin-lead
on solder area; all over .000050
[0.00127] min. nickel underplate
Shell - Carbon steel, plated nickel over
copper
G-Plate - Stainless steel
Retention Leg - Brass, plated tin-lead
over nickel
Receptacle
Plug
Solder Tail
Length
.098
2.50
.125
Part
Solder Tail
Length
.098
2.50
.125
Part
Description
Description
Number
Number
With ground plate
guide sockets, and
plastic mounting
pylons , sequenced
With ground plate
and guide sockets,
every other contact
sequenced
With ground plate,
guide pins, and
plastic mounting
pylons, sequenced
787851-1
787851-2
787855-1
787855-2
3.18
3.18
With ground plate
and without guide
pins, sequenced
.098
2.50
.134
3.40
787882-1
787883-1
788450-1
787885-1
787913-2
With ground plate
and guide sockets,
only 2 contacts
With ground plate,
and guide pins,
sequenced
.098
2.50
.098
2.50
sequenced
With ground plate
and without guide
sockets,sequenced
.098
2.50
75
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Docking Connectors
.050 [1.27] Thru-Hole
Connectors (CHAMP)
(Continued)
200 Position, Vertical Plugs with Retention Legs
Solder Tail
Part
Number
Description
Length
.146
3.70
.125
3.18
With ground plate
without guide pins,
sequenced
788451-1
787851-2
With ground plate
and guide pins,
sequenced
With ground plate
and guide pins,
sequenced
.146
3.70
787886-1
787887-1
.098
2.50
7
.050 [1.27] Thru-Hole
Connectors
240 Position, Right Angle Receptacles with Retention Legs
Part No. 4-11258-2
Material and Finish:
Housing - Liquid Crystal Polymer
Contacts – Copper alloy, plated gold
on contact area; tin-lead on solder tail
area; all over nickel underplate
Tine Plate - Liquid Crystal Polymer
Shell - Steel, plated nickel
Retention Leg - Brass, plated tin-lead
Guide Socket and Pins - Brass,
plated nickel
Ground Plate - Stainless steel
76
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Docking Connectors
.050 [1.27] Thru-Hole
Connectors (CHAMP)
(Continued)
240 Position Right Angle Plug with Retention Legs
Part No. 4-11253-2
240 Position Vertical Plug with Retention Legs
Part No. 179140-3
7
Guide Sockets
Guide Pin
Part No. 177734-1
Hardware - Docking
Connectors
Material and Finish:
Brass, nickel plate
A
Dimension
A (mm)
2.22
Internal
Chamber
30˚
Part
Number
177728-1
0-11355-1
3.5
45˚
Note:
BLUE part numbers indicate 2D
geometry and 3D CAD models
that are included on CD-ROM.
77
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Engineering Notes
78
Personal Systems Products
www.amp.com
Specifications subject to change
Card Bus Double
Slot Assembly
Page 80
Compact Flash
Card Connectors
Page 81
8
Smart Card Connectors
Page 81
Compact Flash
Card Receptacles
Page 81
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
PC Card/Compact Flash/Smart Card
Card Bus Double
Slot Assembly
Rotary Type - Right Button Eject
Product Facts:
ꢀ Available in either top-mount
and bottom-mount types
ꢀ Eject button on either the
left or right
ꢀ Both rotary type and
double-push eject buttons
available
Material and Finish:
Housing - Thermoplastic, black
Contacts – Copper Alloy, gold plated
on contact area, all over underplated
nickel
Arm Bar, Shielding Shell -
Stainless steel
Push Bar - Stainless steel &
Thermoplastic, black
Bottom Mount Type Shown
Standard - Part No. 1123548-1
Bottom Mount - Part No. 1123066-1
Push Push Type
8
Right Button Eject Shown
Right Button Eject - Part No. 1123783-1
Left Button Eject - Part No. 1123902-1
Part No. 1123537-1
80
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
PC Card/Compact Flash/Smart Card
Compact Flash
Card Connectors
50 Position Board Mount Pin Headers
Product Facts:
ꢀ Robust low profile design
ꢀ Meets Compact Flash
Association specifications
ꢀ 1.27mm centerline
ꢀ 10,000 cycle durability
minimum
ꢀ Surface mount with locator
posts
Material and Finish:
Housing - High temperature
thermoplastic, black
Pins – Copper alloy, plated gold over
nickel on mating end; tin-lead over
nickel on solder tails
Part Numbers
Header
Style
Type 1
Type 2
Vertical
146839-1
788643-1
Right Angle
120615-1
788667-1
(Flush Top Mount)
Raised Right Angle
(with ejector)
1123204-1
—
Material and Finish:
Housing - High temperature
thermoplastic, black
Contacts – Copper alloy, plated gold
over nickel on mating end; tin-lead over
nickel on solder tails
Product Facts:
Compact Flash
Receptacle
Style
Surface Mount
Straddle Mount
Part
ꢀ Meets Compact Flash
Association specifications
Number
146784-1
146881-1
Card Receptacles
8
ꢀ 1.27mm centerline spacing
ꢀ 10,000 mating and
unmating cycle
ꢀ Surface mount or straddle
mount
ꢀ Dual beam contact
receptacle design
Smart Card Connectors
Product Facts:
ꢀ Meet IC card standards set
by International Standards
Organization
ꢀ Highly reliable
ꢀ Compatible with IRD
Set-top boxes
ꢀ Can also be used in
medical instruments and
digital TV
Material and Finish:
Housing - UL94V-0 rated,
Thermoplastic, gray
Contact – Phosphor bronze, gold
plated on contact area, tin-lead plated
on soldering area, nickel underplated on
enter area contact
Note:
BLUE part numbers indicate 2D
geometry and 3D CAD models
that are included on CD-ROM.
Part No. 1123078-1
81
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
PC Card/Compact Flash/Smart Card
Smart Card Connectors
(Continued)
50 Position Board Mount Pin Headers
Notes:
Card Detection Switch: Normally
Closed
Switch Style: Unsealed
Boardlock: Yes
Material and Finish:
Housing - Thermoplastic, black
Contact – Phosphor bronze, plated
0.00076mm [.000030 in.] min. gold
over 0.001mm [.000039 in.] min.
nickel on mating areas; 0.0025mm
[.000098 in.] min. tin-lead over
0.001mm [.000039 in.] min. nickel on
solder tail areas
No. of Pos.
Profile
Raised
Standard
Standard
Part Number
953438-11
953398-1
8
8
16
953398-2
1 Raised part provides 2.35mm clearance underneath connector
Notes:
Material and Finish:
Surface Mount, Low Profile
Card Detection Switch: Normally
Housing - High temperature
open
thermoplastic, black
Switch Style: Unsealed
Contacts – Phosphor bronze, plated
0.00076mm [.000030 in.] min. gold
over 0.00127 - 0.00254mm [.000050 -
.000100 in.] nickel on mating areas;
0.00381 - 0.00635mm [.000150 -
.000250 in.] tin-lead over 0.00127 -
0.00254mm [.000050 - .000100 in.]
nickel on solder areas
8
Without Cover
Without Cover
Note:
No. of Pos.
Cover
With
Without
Part Number
145300-2
145300-1
BLUE part numbers indicate 2D
geometry and 3D CAD models
that are included on CD-ROM.
8
8
82
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
PC Card/Compact Flash/Smart Card
Surface Mount Smart Card
with Detection Switch -
8 Positions
With Cover - Part No. 145300-2
Notes:
Card Detection Switch: Normally
open
Card Insertion Depth: 29.2mm
Mateand Finish:
Housing - Thermoplastic, black
Contacts – Copper alloy, plated gold
on mating surface; tin-lead on solder
area; all over nickel underplate
Without Cover - Part No. 145300-1
8
Material and Finish:
Housing - PBT G-F, UL94V-0 rated,
black
Contacts – Phosphor bronze, plated
0.00076mm min. thick gold mating
areas; 0.0025 min. thick tin-lead on
solder tails, all over 0.001mm min.
thick nickel underplate
Smart Card Reader
0.76mm PCB Mount,
Through Hole,
Raised Profile, Blade Switch
Normally Closed - Part No. 953438-1
8 Positions - ISO 1716
Smart Card Reader
PCB (Not Supplied)
Smart Card (Not Supplied)
49.85 ± 0.5
Note:
BLUE part numbers indicate 2D
geometry and 3D CAD models
that are included on CD-ROM.
83
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Engineering Notes
84
Personal Systems Products
www.amp.com
Specifications subject to change
Mini CT
(Common Termination)
1.5mm Connectors
Page 89 - 94
CT (Common Termination)
2mm Pitch Connectors
Page 95
Ultra ATA Bus Connectors
.100 [2.54] Centers
Page 97
9
FPC Connectors
0.5mm Centers
Surface Mount,
1.25mm Pitch Connectors
(AMPSLIM)
Page 88
Horizontal - 1.2mm Height1
Page 86 - 87
Ribbon Cable Connectors
.100 [2.54] Centers
(AMP-LATCH)
Page 96
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Wire-to-Board Connectors
FPC Connectors
0.5mm Centers
Top Contact Type I
Product Facts:
ꢀ FPC board horizontal-
mount connector
Surface Mount,
Horizontal - 1.2mm Height1
ꢀ Contacts on tight 0.5mm
centerline suitable for
super high-density wiring
ꢀ Low profile with the above-
the-board height of only
2.0mm
ꢀ FPC can easily be applied
with low insertion force by
moving the slider
ꢀ Reliable contact is
achieved under high
pressure after FPC
termination
Material and Finish:
Housing – 94V-O rated, heat resistant
resin, black
Slider – 94V-O rated heated resistant
resin, gray
ꢀ No misalignment with FPC
Bottom Contact Type
ensuring positive mating
ꢀ Reflow soldering SMT
(Surface Mount Technology)
compatible with automated
mounting by sucking
Contact, Connector fixing plate -
solder plated copper alloy
9
9
Part Numbers
No. of
Pos.
Top Contact Type
Qty. per Reel
Bottom Contact Type
Part No.
0-353446-6
0-353446-9
1-353446-1
—
1-353446-4
1-353446-5
—
2-353446-0
2-353446-2
2-353446-6
2-353446-8
Tape width (mm)
Part No.
—
—
—
Qty. per Reel
Tape width (mm)
6
9
2,000
2,000
2,000
—
2,000
2,000
—
2,000
2,000
2,000
2,000
16
24
24
—
24
24
—
24
32
32
32
—
—
—
2,000
—
2,000
2,000
2,000
—
—
—
—
24
—
24
24
24
—
—
—
11
13
14
15
17
20
22
26
28
1-353948-3
—
1-917680-51
1-353948-7
2-353948-0
—
—
—
—
—
1 Except 1-917680-5 which is short slider type, 2.05mm height
86
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Wire-to-Board Connectors
FPC Connectors
Top Contact Type
1.0mm Centers
Surface Mount, Horizontal
Material and Finish:
Housing – LCP
Contacts – Phosphor bronze, plated
.000150 [0.0038] thick tin-lead in
mating area and .000050 [0.0013] thick
tin-lead in solder area
Actuator - PPS or PPA
Bottom Contact Type
Part Numbers
Top Contact Type
No. of
Pos.
Bottom Contact Type
Part Number
487952-4
9
Part Number
Tape Width(mm)
4
8
16
—
—
—
—
32
487952-8
—
1-84415-6
87
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Wire-to-Board Connectors
1.25mm Pitch Connectors
(AMPSLIM)
Tab Contact Type - Part No. 353069-1
Product Facts:
ꢀ Wire-to-Board Connectors
Tab Contact:
ꢀ Contacts on 1.25mm
Wire Range – AWG 32-38
centerline
2
[0.035-0.89mm ]
ꢀ Low profile, compact
construction with above-
the-board heights of
1.30mm with the offset-
mount type and 1.85mm
with the horizontal-mount
type mating length of
7.3mm
Wire Insulation Range –
0.45-0.93mm
Tab Housing
ꢀ Uses receptacle contacts
on board-mounting side
and tab contacts on the
wire-mount side
Material and Finish:
Tab Contact – Phosphor bronze,
pre-tin plated
Tab Housing – Nylon 66, GF20%,
UL94V-0 rated, brown (natural)
ꢀ Design eliminates pin
damage problem
ꢀ Ensures low insertion force
and high reliability by
using low-cost tin-plated
contacts
Material and Finish:
Housing – Nylon 46, GF30%,
UL94V-0 rated, color white (natural)
Contacts – Phosphor bronze, plated
tin-lead
Receptacle Assemblies
ꢀ Recommended for use in
miniature, slim-type
equipment such as
notebook PCs, LCD
monitors, cam coders, etc.
Solder Peg - Phosphor bronze, plated
tin-lead
ꢀ Direct insertion of FPCs is
possible in lieu of
connector
9
Offset Type
Horizontal Type
Part Numbers
Offset
No. of
Pos.
Tab
Housing
0-353068-8
1-353068-4
2-353068-0
Horizontal
Receptacle1
0-353119-8
1-353119-4
2-353119-0
Receptacle1
0-353118-8
1-353118-4
2-353118-0
8
14
20
1 3000 per reel
88
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Wire-to-Board Connectors
Mini CT
(Common Termination)
1.5mm Connectors
MT Receptacle Connector Assemblies
Product Facts:
ꢀ Super-miniature wire-to-
board and wire-to-wire
connectors (using panel-
mount intermedeary post
headers)
ꢀ Used for harness-making
by AMP high-speed
crimping machines
ꢀ Consist of wire-mount
receptacle connectors and
a variety of post headers
and two-row holders
No. of
Pos.
2
3
4
5
6
7
8
Part Numbers
Grey
Blue
0-353293-2
0-353293-3
0-353293-4
0-353293-5
0-353293-6
0-353293-7
0-353293-8
0-353293-9
1-353293-0
1-353293-1
1-353293-2
1-353293-3
1-353293-4
1-353293-5
1-353293-6
1-353293-7
1-353293-8
1-353293-9
2-353293-0
5-353293-2
5-353293-3
5-353293-4
5-353293-5
5-353293-6
5-353293-7
5-353293-8
5-353293-9
6-353293-0
6-353293-1
6-353293-2
6-353293-3
6-353293-4
6-353293-5
6-353293-6
6-353293-7
6-353293-8
6-353293-9
7-353293-0
MT Connectors
Material and Finish:
Housing – UL-94V-0 rated glass fiber
reinforced Nylon, grey and blue
Contact – Tin-plated, phosphor bronze
ꢀ Post headers include one-
row type headers (DIP
type, SMT type,
intermediary panel-mount
type) and two-row type
hearders (DIP type,
intermediary panel-mount
type)
9
10
11
12
13
14
15
16
17
18
19
20
Applicable wire sizes:
2
AWG#28-26 (0.08~0.14mm )
Insulation Dia. – 0.8~0.95mm
ꢀ Two-row type post hearders
incorporate two receptacle
connectors in a holder
9
Receptacle Contact-Crimp Type
Material and Finish:
Phosphor bronze, tin-plated
Wire Size
Wire Ins. Dia.
Part Numbers
AWG#
24~28
26~30
mm2
(mm)
S.T.
L.P.
353918-1
353919-1
0.08~0.20
0.05~0.13
0.88~1.00
0.70~0.98
353907-1
353917-1
89
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Wire-to-Board Connectors
Mini CT
Housings for Crimp Type Connectors
(Common Termination)
1.5mm Connectors
(Continued)
Material and Finish:
Nylon 66, UL94V-0 rated, white and
blue
No. of
Pos.
2
3
4
5
6
7
8
Part Numbers
White
Blue
0-353908-2
0-353908-3
0-353908-4
0-353908-5
0-353908-6
0-353908-7
0-353908-8
0-353908-9
1-353908-0
1-353908-1
1-353908-2
1-353908-3
1-353908-4
1-353908-5
1-353908-6
1-353908-7
1-353908-8
1-353908-9
2-353908-0
6-353908-2
6-353908-3
6-353908-4
6-353908-5
6-353908-6
6-353908-7
6-353908-8
6-353908-9
7-353908-0
7-353908-1
7-353908-2
7-353908-3
7-353908-4
7-353908-5
7-353908-6
7-353908-7
7-353908-8
7-353908-9
8-353908-0
9
10
11
12
13
14
15
16
17
18
19
20
9
90
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Wire-to-Board Connectors
Mini CT
Board Mount Post Header Assemblies
One-Row DIP Type
(Common Termination)
1.5mm Connectors
(Continued)
Material and Finish:
Housing – UL94V-0 rated, glass fiber
reinforced
Nylon, grey and blue
Post - 0.5mm square, tin-lead plated,
brass wire
Horizontal Mount
Vertical Mount
(With Bosses)
Part Numbers
No. of
Pos.
2
3
4
5
6
7
8
Horizontal Mount
Vertical Mount
Grey
Blue
Grey
Blue
0-353303-2
0-353303-3
0-353303-4
0-353303-5
0-353303-6
0-353303-7
0-353303-8
0-353303-9
1-353303-0
1-353303-1
1-353303-2
1-353303-3
1-353303-4
1-353303-5
1-353303-6
1-353303-7
1-353303-8
1-353303-9
2-353303-0
5-353303-2
5-353303-3
5-353303-4
5-353303-5
5-353303-6
5-353303-7
5-353303-8
5-353303-9
6-353303-0
6-353303-1
6-353303-2
6-353303-3
6-353303-4
6-353303-5
6-353303-6
6-353303-7
6-353303-8
6-353303-9
7-353303-0
0-353297-2
0-353297-3
0-353297-4
0-353297-5
0-353297-6
0-353297-7
0-353297-8
0-353297-9
1-353297-0
1-353297-1
1-353297-2
1-353297-3
1-353297-4
1-353297-5
1-353297-6
1-353297-7
1-353297-8
1-353297-9
2-353297-0
5-353297-2
5-353297-3
5-353297-4
5-353297-5
5-353297-6
5-353297-7
5-353297-8
5-353297-9
6-353297-0
6-353297-1
6-353297-2
6-353297-3
6-353297-4
6-353297-5
6-353297-6
6-353297-7
6-353297-8
6-353297-9
7-353297-0
9
10
11
12
13
14
15
16
17
18
19
20
9
91
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Wire-to-Board Connectors
Mini CT
Board Mount Post Header Assemblies
One-Row Surface Mount Type
(Common Transmission)
1.5mm Connectors
(Continued)
Material and Finish:
Housing – Glass fiber reinforced heat-
resistant Nylon, beige and black
Post - Tin-lead plated, brass wire
Horizontal Mount
Vertical Mount
Part Numbers*
Horizontal Mount
With Bosses
Vertical Mount
With Bosses
No. of
Pos.
Without Bosses
Without Bosses
Beige
Black
Beige
Black
Beige
Black
Beige
Black
(Natural Color)
(Natural Color)
(Natural Color)
(Natural Color)
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
0-353527-2
0-353527-3
0-353527-4
0-353527-5
0-353527-6
0-353527-7
0-353527-8
0-353527-9
1-353527-0
1-353527-1
1-353527-2
1-353527-3
1-353527-4
1-353527-5
1-353527-6
1-353527-7
1-353527-8
1-353527-9
2-353527-0
5-353527-2
5-353527-3
5-353527-4
5-353527-5
5-353527-6
5-353527-7
5-353527-8
5-353527-9
6-353527-0
6-353527-1
6-353527-2
6-353527-3
6-353527-4
6-353527-5
6-353527-6
6-353527-7
6-353527-8
6-353527-9
7-353527-0
0-353530-2
0-353530-3
0-353530-4
0-353530-5
0-353530-6
0-353530-7
0-353530-8
0-353530-9
1-353530-0
1-353530-1
1-353530-2
1-353530-3
1-353530-4
1-353530-5
1-353530-6
1-353530-7
1-353530-8
1-353530-9
2-353530-0
5-353530-2
5-353530-3
5-353530-4
5-353530-5
5-353530-6
5-353530-7
5-353530-8
5-353530-9
6-353530-0
6-353530-1
6-353530-2
6-353530-3
6-353530-4
6-353530-5
6-353530-6
6-353530-7
6-353530-8
6-353530-9
7-353530-5
—
—
—
—
0-353521-3
0-353521-4
0-353521-5
0-353521-6
0-353521-7
0-353521-8
0-353521-9
1-353521-0
1-353521-1
1-353521-2
1-353521-3
1-353521-4
1-353521-5
1-353521-6
1-353521-7
1-353521-8
1-353521-9
2-353521-0
5-353521-3
5-353521-4
5-353521-5
5-353521-6
5-353521-7
5-353521-8
5-353521-9
6-353521-0
6-353521-1
6-353521-2
6-353521-3
6-353521-4
6-353521-5
6-353521-6
6-353521-7
6-353521-8
6-353521-9
7-353521-0
0-353524-3
0-353524-4
0-353524-5
0-353524-6
0-353524-7
0-353524-8
0-353524-9
1-353524-0
1-353524-1
1-353524-2
1-353524-3
1-353524-4
1-353524-5
1-353524-6
1-353524-7
1-353524-8
1-353524-9
2-353524-0
5-353524-3
5-353524-4
5-353524-5
5-353524-6
5-353524-7
5-353524-8
5-353524-9
6-353524-0
6-353524-1
6-353524-2
6-353524-3
6-353524-4
6-353524-5
6-353524-6
6-353524-7
6-353524-8
6-353524-9
7-353524-0
9
* Emboss tape mounted, 500 pcs.
92
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Wire-to-Board Connectors
Mini CT
Panel Mount Post Header Assemblies
One-Row Intermediary Application
(Common Transmission)
1.5mm Connectors
(Continued)
Material and Finish:
Housing – UL94V-0 rated, 66Nylon,
white and blue
Post - Tin-lead plated, brass wire
Part Number
No. of
Pos.
White
Blue
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
0-353320-2
0-353320-3
0-353320-4
0-353320-5
0-353320-6
0-353320-7
0-353320-8
0-353320-9
1-353320-0
1-353320-1
1-353320-2
1-353320-3
1-353320-4
1-353320-5
1-353320-6
1-353320-7
1-353320-8
1-353320-9
2-353320-0
5-353320-2
5-353320-3
5-353320-4
5-353320-5
5-353320-6
5-353320-7
5-353320-8
5-353320-9
6-353320-0
6-353320-1
6-353320-2
6-353320-3
6-353320-4
6-353320-5
6-353320-6
6-353320-7
6-353320-8
6-353320-9
7-353320-0
9
Receptacle Connector Mounting Holders for
Two-Row Arrangement
Material and Finish:
Housing – UL94V-0 rated, 66 Nylon,
white and blue
Part Number
No. of
Pos.
White
Blue
22
24
26
28
30
32
34
36
38
40
2-353294-2
2-353294-4
2-353294-6
2-353294-8
3-353294-0
3-353294-2
3-353294-4
3-353294-6
3-353294-8
4-353294-0
7-353294-2
7-353294-4
7-353294-6
7-353294-8
8-353294-0
8-353294-2
8-353294-4
8-353294-6
8-353294-8
9-353294-0
93
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Wire-to-Board Connectors
Mini CT
Board Mount Post Header Assemblies
Two-Row DIP Type
(Common Transmission)
1.5mm Connectors
(Continued)
Material and Finish:
Housing – UL94-0 rated, glass fiber
reinforced
Nylon, grey and blue
Post – 0.5mm square, tin-lead plated,
brass wire
Vertical Mount (with Bosses)
Panel Mount Post Header Assemblies
Two-Row Intermediary Type
Part Numbers
Material and Finish:
Housing – UL94V-0 rated, 66 Nylon,
white and blue
No. of
Pos.
Board Mount
DIP Type
Panel Mount
Intermediary Type
Grey
Blue
White
Blue
Post – Tin-lead plated, brass wire
22
24
26
28
30
32
34
36
38
40
2-353308-2
2-353308-4
2-353308-6
2-353308-8
3-353308-0
3-353308-2
3-353308-4
3-353308-6
3-353308-8
4-353308-0
7-353308-2
7-353308-4
7-353308-6
7-353308-8
8-353308-0
8-353308-2
8-353308-4
8-353308-6
8-353308-8
9-353308-0
2-353322-2
2-353322-4
2-353322-6
2-353322-8
3-353322-0
3-353322-2
3-353322-4
3-353322-6
3-353322-8
4-353322-0
7-353322-2
7-353322-4
7-353322-6
7-353322-8
8-353322-0
8-353322-2
8-353322-4
8-353322-6
8-353322-8
9-353322-0
9
94
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Wire-to-Board Connectors
MT Receptacle Assemblies —
2mm Pitch
Post Header Assemblies —
Standard and Box Type
CT (Common Termination)
2mm Pitch Connectors
Product Facts:
ꢀ Receptacle is preloaded
with insulation displace-
ment contacts
ꢀ Board mount post headers
are available in standard
and box-type
R
R
Header – Standard Vertical Mount
MT Receptacle
Material and Finish:
Receptacle Housing – Glass-filled
P.B.T. , UL 94V-0, white
Connector Contacts – Phosphor
bronze, pretin plated
Header Housing – Nylon 6/6, 94V-0,
natural
Header – Box Type Vertical Mount
Header Posts – Brass, pre-tin plated
Part Numbers
Header Assemblies
No. of
MT Receptacle
Pos.
Standard
Box Type
Assembly
Vertical Mount
Vertical Mount
2
4
5
6
7
173977-2
173977-4
173977-5
173977-6
173977-7
173977-9
1-173977-1
1-173977-2
1-173977-4
173981-2
173981-4
173981-5
173981-6
173981-7
173981-9
1-173981-1
1-173981-2
1-173981-4
175487-2
175487-4
175487-5
175487-6
175487-7
175487-9
1-175487-1
1-175487-2
1-175487-4
9
11
12
14
9
FFC Connectors
.050 [1.27] Centers
Receptacle Housing -
Shrouded Double Row
Contact
Configuration
No. of
Pos.
Contact
Part Number
Strip
Comb
—
30
0-487547-1
2-487558-7
Contacts
No. of
Pos.
Receptacle
Part Number
30
40
50
60
100
3-487937-0
4-487937-0
5-487937-0
6-487937-0
0-487937-1
Material and Finish:
Housing – Polyester, black
Contacts – Phosphor bronze, duplex
plated .000030 [0.00076] min. gold on
mating area; .000100 [0.00254] min.
bright tin-lead in crimp area; entire
contact underplated .000050 [0.00127]
min. nickel
Note:
BLUE part numbers indicate 2D
geometry and 3D CAD models
that are included on CD-ROM.
95
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Wire-to-Board Connectors
Ribbon Cable Connectors
.100 [2.54] Centers
(AMP-LATCH)
Novo Receptacles — .100 x .100 [2.54 x 2.54] Centerline,
Center & Military Polarization with Dual Beam Contact Interface
Product Facts:
ꢀ Uses insulation displacement
(IDC) contacts with slotted
beam technology to mass
terminate conductors
ꢀ Ability to terminate up to 64
conductors simultaneously
ꢀ Contacts supply residual
spring pressure for long
term, gas-tight connections
ꢀ Corrosion resistant
ꢀ One-step application
machinery is available
ꢀ Latching feature - individual
contact tails latch into
Part Numbers*
termination cover, eliminating
strain relief requirement
No. of
Pos.
Center & Military
Duplex B
Military
Duplex B
Strain
Relief
Duplex A
Duplex C
—
—
—
—
—
111699-9
—
Duplex A
0-746290-1
0-746290-4
0-746290-8
0-746290-9
—
10
20
34
40
40
40
50
0-746288-1
0-746288-4
0-746288-8
0-746288-9
—
0-746285-1
0-746285-4
0-746285-8
0-746285-9
0-111983-32-
—
0- 499997-1
0- 499997-4
0- 499997-8
0- 499997-9
0-111891-11
0-111891-12
1-499997-0
499252-5
499252-2
499252-6
499252-1
—
R
R
—
—
—
499252-4
1-746288-0
1-746285-0
1-746290-0
* Mates with AMPLATCH headers on page 98 and AMPMODU headers on page 99
1 Polyester PBT, gray cover; molded keying in position 20 (no contact)
2 Molded keying in position 20 (no contact)
Material and Finish:
Housing – Black thermoplastic, 94V-0
rated, flame retardant
Contacts – Copper alloy, duplex plated
A – .000015 [0.00038] gold on contact
area, .000100-.000200 [0.00254-
0.00508] tin-lead on solder area, with
entire contact underplated .000050
[0.00127] nickel
B – .000030 [0.00076] gold on contact
area, .000100-.000200 [0.00254-
0.00508] tin-lead on solder area, with
entire contact underplated .000050
[0.00127] nickel
C – Gold flash on contact area, .000100
[0.00508] min. tin-lead on solder area,
with entire contact underplated .000050
[0.00127] nickel
9
Note:
BLUE part numbers indicate 2D
geometry and 3D CAD models
that are included on CD-ROM.
96
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Wire-to-Board Connectors
Accessories - Pull Tabs
(AMP-LATCH)
Permanent (for Receptacles and Pin Connectors)
Material - PVC, 94VTM-1 rated, natural
No. of
Pos.
Part
Number
10
20
34
40
50
0-884450-2
0-884450-5
0-884450-8
0-884450-9
1-884450-0
Snap-In Flexible AMP-LATCH Novo
Snap-In Flexible Right Angle
40 Position Part No. 111735-1
Material - Polymer
40 Position Part No. 120623-1
Material - Nylon 6/6, 94V-2 rated, black
Ultra ATA Bus Connectors
.100 [2.54] Centers
Product Facts:
ꢀ IDC termination
ꢀ Backward compatible with
current IDE Interfaces
ꢀ Improved signal integrity: 1
to 1 signal to ground ratio
ꢀ Improved crosstalk when
compared to existing IDE
Cable Assembly
9
ꢀ Color coded connectors for
“System board,” and
“Master HDD” and “Slave
HDD”
ꢀ Cable impedance 80 ohms
ꢀ Up to 3 connectors per
cable assembly
ꢀ 15 microinches gold plating
Center & Military Polarized
Military Polarized
Configurartion/A&B Definition
Housing
Color
Cover
P/N
Housing
Color
Cover
Color
P/N
Color
“System” Board
“Primary or Master” Connector
“Slave” Connector
120613-2
120613-1
120613-3
Blue
Black
Gray
Black
Black
Black
120605-2
120605-1
120613-3
Blue
Black
Gray
Black
Black
Black
Application Tooling
See Application Specification 114-40056
Note: Use Strain Relief Part No. 499252-1
Note:
BLUE part numbers indicate 2D
geometry and 3D CAD models
that are included on CD-ROM.
97
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Wire-to-Board Connectors
.025 [0.64] Square Straight Post
Material and Finish:
Housing – Black thermoplastic, 94V-0
rated, flame retardant
Contacts – Copper alloy, duplex plated
A – .000015 [0.00038] gold on contact
area, .000100-.000200 [0.00254-
0.00508] tin-lead on solder area, with
entire post underplated .000050
[0.00127] nickel
Low Profile Headers -
Shrouded with .150 [3.81]
End Dimension,
Double Row, .100 x .100
[2.54 x 2.54] centers
(AMP-LATCH)
B – .000030 [0.00076] gold on contact
area, .000100-.000200 [0.00254-
0.00508] tin-lead on solder area, with
entire post underplated .000050
[0.00127] nickel
C – Gold flash on contact area, .000100-
.000200 [0.00254-0.00508] tin-lead on
solder area, with entire post underplated
.000050 [0.00127] nickel
.025 [0.64] Square Right-Angle Post
Straight Post
9
Right-Angle Post
Part Numbers
No. of
Straight Post
Right-Angle Post
Pos.
10
20
34
40
40
40
50
Duplex A
0-103308-1
0-103308-5
0-103308-7
0-103308-8
0-111782-8
0-104582-21
1-103308-0
Duplex B
0-103309-1
0-103309-5
0-103309-7
0-103309-8
—
Duplex C
—
—
—
—
111715-8
—
—
Duplex A
0-103310-1
0-103310-5
—
0-103310-8
—
Duplex B
0-103311-1
0-103311-5
0-103311-7
0-103311-8
—
—
—
—
1-103309-0
1-103310-0
1-103311-0
1 With kinked leg
Note:
BLUE part numbers indicate 2D
geometry and 3D CAD models
that are included on CD-ROM.
98
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Wire-to-Board Connectors
Single Row — Unshrouded, .025 [0.64] Square Posts
Material and Finish:
Housing–Thermoplastic, 94V-0 rated,
black
Posts–Phosphor bronze, plated as
follows:
Breakaway Headers —
.100 [2.54] Centers
(AMPMODU)
Plating
Code
Part Numbers
C=.120 [3.05]
D=.230 [5.84]
No. of
Pos.
C=.090 [2.29]
D=.230 [5.84]
C=.125 [3.18]
D=.318 [8.08]
A
B
C
A
B
C
A
B
C
103747-2
—
103741-2
103747-3
—
103741-3
103747-4
—
103239-2
103185-2
103327-2
103239-3
103185-3
103327-3
103239-4
103185-4
103327-4
102976-2
102972-2
103321-2
102976-3
102972-3
103321-3
102976-4
102972-4
103321-4
A. Duplex plated .000030 [0.00076]
min. gold on contact area, .000100-
.000200 [0.00254-0.00508] min. tin-
lead on solder area, with entire post
underplated .000050 [0.00127] min.
nickel
B. Duplex plated .000015 [0.00038]
min. gold on contact area, .000100-
.000200 [0.00254-0.00508] min. tin-
lead on the solder area, with entire
contact underplated .000050 [0.00127]
min. nickel
2
3
4
D
C
Single Row Header
103741-4
D
C
C. .000100-.000200 [0.00254-
0.00508] tin-lead over .000050
[0.00127] nickel on entire post
Double Row Header
Double Row — Unshrouded, .025 [0.64] Square Posts
Part Numbers
C=.120 [3.05]
D=.230 [5.84]
No. of
Pos.
Plating
Code
C=.090 [2.29]
D=.230 [5.84]
C=.125 [3.18]
D=.318 [8.08]
R
R
A
B
C
A
B
C
A
B
C
1-103783-7
—
1-103777-7
2-103783-0
—
2-103777-0
2-103783-5
—
1-103240-7
1-103186-7
1-103328-7
2-103240-0
2-103186-0
2-103328-0
2-103240-5
2-103186-5
2-103328-5
1-102977-7
1-102973-7
1-103322-7
2-102977-0
2-102973-0
2-103322-0
2-102977-5
2-102973-5
2-103322-5
34
40
50
2-103777-5
9
Headers — .100 [2.54]
Centers for Insulation
Displacement (IDC)
Product Facts:
ꢀ Connectors and headers are
end-to-end stackable
ꢀ All contacts are slotted for
insulation displacement
(IDC) terminal technique
Connectors (MTA-100)
Material and Finish:
Header Housing – Polyester, 94V-0,
white
Header Posts – Copper alloy, tin
plated or .000030 [0.00076] min. gold
over nickel
Header – Shrouded
Header – Unshrouded
ꢀ Contacts are lubricated to
prevent fretting corrosion
Part Numbers
No. of
Pos.
Unshrouded
Tin Gold
640456-4 641215-4
Shrouded
ꢀ One-step assembly
Tin
Gold
4
644486-4
644487-4
R
R
Note:
BLUE part numbers indicate 2D
geometry and 3D CAD models
that are included on CD-ROM.
99
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Engineering Notes
100
Personal Systems Products
www.amp.com
Specifications subject to change
Standard Edge .050 Series
PCI Connectors
Page 112
Standard Edge II Series
Connectors — .100 [2.54]
Centerlines
System 50 Connectors
(AMPMODU)
Page 113
Page 110
0.6mm Pitch Free
Height (FH) and GIGA
Surface Mount Connectors
Page 102 - 104
1 0
.050 [1.27] FH Connectors
(CHAMP)
Page 108
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Board-to-Board Connectors
0.6mm Pitch Free
Height (FH) and GIGA
Surface Mount Connectors
FH Receptacles - 4H (4mm) Stacking Height
Product Facts:
ꢀ 0.6 [.024] pitch SMT
connectors for parallel
board stacking
ꢀ Connector sizes ranging
from 50 to 280 positions
ꢀ Solder pegs included for
anti-peeling
ꢀ Available packaged on
“tape-and-reel” for
automatic placement per
EIA standards
ꢀ Surface areas provided to
accommodate vacuum
nozzles
Material and Finish:
FH Receptacles - 8H (8mm) and 12H (12mm) Stacking Height
Housing – High temperature
thermoplastic, 94V-O rated
ꢀ Enhanced electrical
performance grounded
version (GIGA) available
for high speed signals
Signal Contacts – Copper alloy,
duplex plated 0.00020mm [.000008 in.]
min. gold on contact area, 0.00005mm
[.000002 in.] min. gold on solder area,
with entire contact underplated
R
0.00130mm [.000051 in.] min. nickel
Ground Contacts – Copper alloy,
duplex plated 0.00020mm [.000008 in.]
min. gold on contact area, 0.00100mm
[.000039 in.] min. tin-lead on solder
area, with entire contact underplated
0.00130mm [.000051 in.] min. nickel
Part Numbers
Stacking
Height
No. of
Positions
Tray
Packaged
Tape
Packaged
50
70
80
100
140
160
80
140
160
0-316077-3
—
0-316560-6
—
1-316077-0
1-316560-1
0-316317-6
1-316318-0
1-316318-1
0-353190-3
5-353190-5
0-353190-6
0-353190-8
1-353190-0
—
4H
10
8H
—
—
—
12H
Note: All receptacles include common
ground contacts that mate with standard
plug assemblies or GIGA plug
assemblies with ground plates.
102
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Board-to-Board Connectors
0.6mm Pitch Free
Height (FH) and GIGA
Surface Mount Connectors
(Continued)
FH Standard Plugs - 4H (4mm), 5H (5mm), 6H (6mm)
and 8H (8mm) Stacking Heights
Material and Finish:
Housing – High temperature
thermoplastic, 94V-O rated
Signal Contacts – Copper alloy,
duplex plated 0.00020mm [.000008 in.]
min. gold on contact area, 0.00100mm
[.000039 in.] min. tin-lead on solder
area, with entire contact underplated
0.00130mm [.000051 in.] min. nickel
GIGA Plugs - 4H (4mm), 5H (5mm), 6H (6mm), 7H (7mm)
and 8H (8mm) Stacking Heights
Material and Finish:
Housing – High temperature
thermoplastic, 94V-O rated
Contacts – Copper alloy; duplex
plated 0.00020mm [.000008 in.] min.
gold on contact area, 0.00100mm
[.000039 in.] min. tin-lead on solder
area, with entire contact underplated
0.00130mm [.000051 in.] min. nickel
Ground Plates – Phosphor bronze,
plated 0.00300-0.00500mm [.000120-
.000200 in.] tin-lead over 0.00050mm
[.000020 in.] copper
Part Numbers
Standard Plugs
GIGA Plugs
Stacking
Height
No. of
Positions
Tray
Tape
Tray
Tape
Packaged
10
Packaged
Packaged
Packaged
0-316135-3
0- 0-316135-5
—
50
70
100
140
160
50
160
80
100
140
80
0-316076-3
—
0-353183-3
—
0-353183-8
1-353183-0
—
—
—
5-353184-5
—
4H
1-316076-0
1-316559-1
1-353184-0
—
1-316135-0
1-316135-1
—
—
—
—
5-353692-3
—
5H
6H
1-353471-1
—
—
—
—
—
—
5-353186-6
—
0-
—
—
—
—
—
—
—
—
1-353185-8
1-353185-0
—
1-353186-0
0-353831-6
1-353831-0
1-353188-0
1-353188-1
7H
8H
140
140
160
—
—
1-353187-0
1-353187-1
1-316562-1
Note: All GIGA plugs include ground
plates that mate with receptacles with
common ground contacts.
103
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Board-to-Board Connectors
Note: Receptacle includes common
ground contacts that mate with standard
plug assemblies or GIGA plug
0.6mm Pitch Free
Height (FH) and GIGA
Surface Mount Connectors
(Continued)
FH Bridge Receptacle - 4H (4mm) Double Row Stacking Heights,
280 Positions
Part No. 1-353206-0
assemblies with ground plates.
Material and Finish:
Housing – High temperature
thermoplastic, 94V-O rated
Signal Contacts – Copper alloy,
duplex plated 0.00020mm [.000008 in.]
min. gold on contact area, 0.00005mm
[.000002 in.] min. gold on solder area,
with entire contact underplated
0.00130mm [.000051 in.] min. nickel
Ground Contacts – Copper alloy,
duplex plated 0.00020mm [.000008 in.]
min. gold on contact area, 0.00100mm
[.000039 in.] min. tin-lead on solder
area, with entire contact underplated
0.00130mm [.000051 in.] min. nickel
Note: All GIGA plugs include ground
plates that mate with receptacles with
common ground contacts.
FH Standard and GIGA Bridge Plugs - 4H (4mm), 6H (6mm),
8H (8mm) Double Row Stacking Heights,
280 Positions
Material and Finish:
Housing – High temperature
thermoplastic, 94V-O rated
Signal Contacts – Copper alloy,
duplex plated 0.00020mm [.000008 in.]
min. gold on contact area, 0.00100mm
[.000039 in.] min. tin-lead on solder
area, with entire contact underplated
0.00130mm [.000051 in.] min. nickel
Ground Plates (GIGA Plug) –
Phosphor bronze, plated 0.00300-
0.00500mm [.000120-.000200 in.] tin-
lead over 0.00050mm [.000020 in.]
copper
10
Part Numbers
Stacking
Height
Standard
Plug
GIGA
Plug
4H
6H
8H
1-353284-0
1-353134-0
1-353135-0
1-353231-0
1-353232-0
1-353233-0
104
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Board-to-Board Connectors
0.8mm Pitch Free
Height (FH) Vertical
Surface Mount Connectors
Plugs - 5mm, 6mm, 7mm and 8mm Stacking Heights
Product Facts:
ꢀ For parallel board stacking
applications
ꢀ High density packaging on
0.8 [.031] centerline
spacing
ꢀ Available sizes from 40 to
200 positions (in 20
position increments)
ꢀ Board stacking heights
available from 5 [.197] to
16 [.630] 9 (in 1 [.039]
increments)
ꢀ Bellows type spring
contacts are resistant to
scooping and stubbing
during mating and
unmating
Material and Finish:
6mm Plug Shown
Housing – High temperature
thermoplastic, natural color, 94V-O
rated
Contacts – Brass; duplex plated
0.00020mm [.000008 in.] min. gold on
contact area, 0.00100mm [.000039 in.]
min. tin-lead on solder area, with entire
contact underplated 0.00130mm
[.000051 in.] min. nickel
ꢀ Positioning bosses for
proper on-board orientation
ꢀ Available packaged on
“tape-and reel” for
automatic placement per
EIA Standards
R
Part Numbers
No. of
Pos.
5mm1
6mm2
7mm3
8mm4
Tube
Packaged
Tape
Packaged*
Tube
Packaged
Tape
Packaged*
Tube
Packaged
Tape
Packaged*
Tube
Packaged
Tape
Packaged*
40
60
80
100
120
140
160
180
200
0-177984-1
0-177984-2
0-177984-3
0-177984-4
0-177984-5
0-177984-6
0-177984-8
0-—
177986-1
177986-2
177986-3
177986-4
177986-5
177986-6
—
0-179029-1
0-179029-2
0-179029-3
0-179029-4
0-179029-5
0-179029-6
0-179029-8
0-179029-9
1-179029-0
1-177986-1
1-177986-2
1-177986-3
1-177986-4
1-177986-5
—
0-179030-1
0-179030-2
0-179030-3
0-179030-4
0-179030-5
0-179030-6
0-179030-8
0-—
2-177986-1
2-177986-2
2-177986-3
2-177986-4
2-177986-5
—
0-179031-1
0-179031-2
0-179031-3
0-179031-4
0-179031-5
0-179031-6
0-179031-8
0-179031-9
1-179031-0
3-177986-1
3-177986-2
3-177986-3
3-177986-4
3-177986-5
—
10
—
—
—
—
—
—
—
—
—
—
—
1-177984-0
01-179030-0
* With steel cover for automatic placement.
1 5mm for 5mm [.197 in.], 9mm [.354 in.] and 13mm [.512 in.] stacking heights.
2 6mm for 6mm [.236 in.], 10mm [.394 in.] and 14mm [.551 in.] stacking heights.
3 7mm for 7mm [.276 in.], 11mm [.433 in.] and 15mm [.591 in.] stacking heights.
4 8mm for 8mm [.315 in.], 12mm [.472 in.] and 16mm [.630 in.] stacking heights.
Note:
BLUE part numbers indicate 2D
geometry and 3D CAD models
that are included on CD-ROM.
105
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Board-to-Board Connectors
0.8mm Pitch Free
Height (FH) Vertical
Surface Mount Connectors
(Continued)
Receptacles - 5mm, 9mm, and 13mm Stacking Heights
Material and Finish:
Housing – High temperature
thermoplastic, natural color, 94V-O
rated
Contacts – Beryllium copper; duplex
plated 0.00020mm [.000008 in.] min.
gold on contact area. 0.00100mm
[.000039 in.] min. tin-lead on solder
area, with entire contact underplated
0.00130mm [.000051 in.] min. nickel
9mm Receptacle Shown
Part Numbers
No. of
Pos.
5mm1
9mm2
13mm3
Tube
Packaged
Tape
Packaged*
Tube
Packaged
Tape
Packaged*
Tube
Packaged
Tape
Packaged*
40
60
80
100
120
140
160
180
200
0-177983-1
0-177983-2
0-177983-3
0-177983-4
0-177983-5
0-177983-6
0-177983-8
0-—
177985-1
177985-2
177985-3
177985-4
177985-5
—
—
—
—
5-179009-1
5-179009-2
5-179009-3
5-179009-4
5-179009-5
5-179009-6
5-179009-8
5-179009-9
6-179009-0
5-179180-1
5-179180-2
5-179180-3
5-179180-4
5-179010-1
5-179010-2
5-179010-3
5-179010-4
5-179010-5
5-179010-6
5-179010-8
5-179010-9
6-179010-0
84616-1
84616-2
84616-3
84616-4
84616-5
—
—
—
—
—
—
—
—
—
1-177983-0
* With steel cover for automatic placement.
1 5mm for 5mm [.197 in.], 6mm [.236 in.], 7mm [.276 in.] and 8mm [.315 in.] stacking heights.
2 9mm for 9mm [.354 in.], 10mm [.394 in.], 11mm [.433 in.] and 12mm [.472 in.] stacking heights.
3 13mm for 13mm [.512 in.], 14mm [.551 in.], 15mm [.591 in.] and 16mm [.630 in.] stacking heights.
10
Note:
BLUE part numbers indicate 2D
geometry and 3D CAD models
that are included on CD-ROM.
106
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Board-to-Board Connectors
1.0mm Pitch Free
Height (FH) Surface Mount
Connectors (IEEE 1396)
Receptacles
Product Facts:
ꢀ For board stacking
applications
ꢀ High density packaging on
1.0mm [.039 in.]
centerline spacing
ꢀ Available in standard 64-
position and optional 84-
position sizes
ꢀ “Tape-and-reel” packaged
per EIA standards
ꢀ Board stacking heights
available from 8mm
[.315 in.] to 15mm
[.591 in.]
Shown with locating posts
Material and Finish:
Housing – Liquid crystal polymer,
black
ꢀ Increased plastic clearance
eliminates stress to solder
joints during mating
Plugs
Contacts – Phosphor bronze; duplex
plated 0.00076mm [.000030 in.] min.
gold on contact area, 0.00381mm
[.000150 in.] min. tin-lead on solder
area, with entire contact underplated
0.00127mm [.000050 in.] min. nickel
Vacuum Cover – Aluminum Alloy
ꢀ Improved locating posts
ensure accurate hand or
robotic placement
ꢀ Meets EIA-700 AAAB
specifications for IEEE 1386
applications
Part Numbers
Stacking
No. of
Height
With Locating Posts
Receptacle Plug
With Vacuum Cover
Pos.
mm [in.]
Receptacle
Plug
10
08 [.315]
09 [.354]
10 [.394]
11 [.433]
120521-1
120521-1
120521-1
120603-1
120603-1
120523-1
120524-1
120524-1
120521-2
120521-2
120521-2
120603-2
120603-2
120523-2
120524-2
120524-2
120525-1
120526-1
120527-1
120526-1
120527-1
120527-1
120526-1
120527-1
120525-2
120526-2
120527-2
120526-2
120527-2
120527-2
120526-2
120527-2
120528-1
120528-1
120528-1
120529-1
120529-1
120530-1
120531-1
120531-1
120528-2
120528-2
120528-2
120529-2
120529-2
120530-2
120531-2
120531-2
120532-1
120533-1
120534-1
120533-1
120534-1
120534-1
120533-1
120534-1
120532-2
120533-2
120534-2
120533-2
120534-2
120534-2
120533-2
120534-2
64
12 [.472]
13 [.512]
14 [.551]
15 [.591]
08 [.315]
09 [.354]
10 [.394]
11 [.433]
84
12 [.472]
13 [.512]
14 [.551]
15 [.591]
Note:
BLUE part numbers indicate 2D
geometry and 3D CAD models
that are included on CD-ROM.
107
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Board-to-Board Connectors
Vertical Receptacles and Plugs— Standard Temperature
.050 [1.27] FH Connectors
(CHAMP)
Product Facts:
ꢀ All-plastic headers for
board-to-board inter-
connections
ꢀ Proprietary single-spring
leaf contact design
ꢀ Closed bottom inhibits flux
Vertical Receptacle
Vertical Plug – Thru-Hole
and solder contamination
ꢀ Detent locking with tactile
feedback
Material:
Housing – Glass-filled nylon 6/6,
94V-0, black
Vertical Plug – Surface Mount
With Solder Peg
Vertical Plug – Surface Mount
With Thru-Hole Flange
Contacts – Phosphor bronze, plated
.000012 [0.00030] min. gold in mating
area, tin-lead in solder area
Part Numbers
Plugs
Surface Mount
W/Solder Peg W/Thru-Hole Flange
No. of
Pos.
Receptacle
(12mm Stack Height) Thru-Hole
40
60
100
140
176372-1
176372-2
176372-4
176272-6
176380-1
176380-2
176380-4
176380-6
–
–
179656-2
–
179657-4
–
–
–
Right-Angle Receptacles and Plugs— Standard Temperature
Right-Angle Receptacle
Right-Angle Plug
60-Position – Part No. 176379-2
60-Position – Part No. 176381-2
10
Note:
BLUE part numbers indicate 2D
geometry and 3D CAD models
that are included on CD-ROM.
108
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Board-to-Board Connectors
Right-Angle and Vertical Plugs and Receptacles
.050 [1.27] Series I
Connectors (CHAMP)
Product Facts:
ꢀ All-plastic pc board
mounting
ꢀ Vertical and right angle
plugs and receptacles
ꢀ Parallel, perpendicular and
Right-Angle Plug
and in-line interconnections
ꢀ Single-spring contact
design for high tolerance to
mating depth variations
ꢀ Receptacle connectors will
mate with .062 [1.57] pc
boards to allow service as
card edge connectors
Material:
Housing and Tine Plate –
LCP, 94V-0, black
Contacts – Phosphor bronze, plated
.000030 [0.00076] min. gold on contact
area, tin-lead on solder tails, all nickel
underplate
Right-Angle Receptacle
Boardlocks – Brass, plated tin-lead
Vertical Plug
Vertical Plug
Part Numbers
No. of
Plug
Receptacle
Pos
Right-Angle
557100-5
1-557100-3
1-557100-7
2-557100-1
2-557100-5
3-557100-7
Vertical
557102-5
1-557102-3
1-557102-7
2-557102-1
2-557102-5
3-557102-7
Right Angle
557101-5
1-557101-3
1-557101-7
2-557101-1
2-557101-5
3-557101-7
Vertical
557103-5
1-557103-3
1-557103-7
2-557103-1
2-557103-5
3-557103-7
40
60
68
80
100
160
10
Vertical Receptacle Headers and Plug Headers with Self
Retaining Posts — .050 x .100 [1.27 x 2.54] Centerline
Subminiature D Connectors
.050 Series I, All-Plastic
(AMPLIMITE)
Product Facts:
ꢀ High Density D-type interface
ꢀ Flame retardant
thermoplastic housings
ꢀ Vertical and right angle
versions available
68-Position Receptacle with
Self Retaining Posts
68-Position Plug with
Self Retaining Posts
R
R
Material:
Part Numbers
Housing – Thermoplastic, 94V-0,
black
No. of
Pos.
.000008 [0.0002]
Gold Plate
.000030 [0.00076]
Gold Plate
Receptacle
174681-7
Plug
174683-7
Receptacle
Plug
Contacts – Phosphor bronze, plated
gold on contact area, tin-lead on solder
area, all nickel underplate
68
6-174681-7
6-174683-7
Note:
BLUE part numbers indicate 2D
geometry and 3D CAD models
that are included on CD-ROM.
109
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Board-to-Board Connectors
Thru-Hole Headers — Shrouded, Double Row
System 50 Connectors
(AMPMODU)
Product Facts:
ꢀ High density contact
spaced on .050 x .100
[1.27 x 2.54] centers
ꢀ Standoffs for ease of
cleaning
ꢀ High temperature-tolerant
thermoplastic housings
Double Row, Right-Angle Header
Double Row, Vertical Header
ꢀ Shrouded and unshrouded
headers available
Part Numbers
Right-Angle
Part Numbers
Vertical
No. of
Pos.
No.of
Pos.
Mount
Mount
R
ISO
9001
20
30
40
50
60
104069-1
104069-5
104069-6
104069-2
104069-7
104069-3
1-104069-7
16
20
24
30
34
40
50
60
80
100
1-104068-0
104068-1
1-104068-1
104068-3
1-104068-3
104068-4
104068-5
104068-6
1-104068-6
1-104068-7
R
Certified
Material:
Housing – Thermoplastic, 94V-0
rated, black
Contacts – Copper alloy, plated
.000030 [0.00076] min. gold on mating
area, .000150 [0.00381] min. tin-lead
on solder posts, with entire contact
underplated .000050 [0.00127] min.
nickel
80
100
Thru-Hole Receptacles —
Double Row, Vertical Mount
Note: Mating cable-to-board receptacles below and thru-hole receptacles at right.
Thru-Hole Headers — Unshrouded, Double Row
Vertical Thru-Hole Receptacle
No. of
Pos.
Part
Numbers
No. of
Pos.
Part
Numbers
20
24
30
40
50
60
80
100
104078-1
104078-9
104078-4
104078-2
104078-5
104078-6
104078-7
104078-8
30
36
80
103916-9
1-103916-8
1-103916-6
1-103916-7
100
Note: Mating cable-to-board receptacles
below and thru-hole receptacles at right.
Thru-Hole Headers - Unshrouded
10
System 50 Double Row
Cable-to-Board
Receptacles
No. of
Pos.
Part
Numbers
20
24
40
50
60
0-111196-4
0-111196-5
0-111196-9
1-111196-1
1-111196-2
(AMPMODU)
Material and Finish:
Housing – Thermoplastic, 94V-0 rated
Latches – Stainless steel
Contacts – Beryllium copper, plated
gold on mating end, bright tin-lead on
termination end
Note: Mates with headers above
Note:
BLUE part numbers indicate 2D
geometry and 3D CAD models
that are included on CD-ROM.
110
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Board-to-Board Connectors
Vertical Receptacles
50/50 Grid Connectors,
.050 x .050 [1.27 x 1.27]
(AMPMODU)
Product Facts:
ꢀ Surface mount products for
parallel board-to-board
applications
ꢀ Three board-to-board stack
Material and Finish:
Housing – Thermoplastic, 94V-0,
heights available
black
ꢀ Non-protrusive metallic
holddowns for .062 [1.57]
boards
Holddowns – Copper alloy plated
.000150 [0.00381] min. tin-lead over
.000050 [0.00127] min. nickel
Contacts – Beryllium copper
(Receptacles)/ Phosphor bronze
(Headers) plated .000030 [0.00076]
min. gold in mating area, .000150
[0.00381] min tin-lead in solder area,
all over .000050 [0.00127] min. nickel
ꢀ Reliable dual-beam recep-
tacle contacts for
redundancy
R
R
Vertical Headers
10
Part Numbers
No. of
Pos.
Headers
Receptacles
.250 [6.35] .320 [8.13] .390 [9.91]
Mating Ht.
Mating Ht.
Mating Ht.
10
20
30
40
50
60
70
80
90
100
104652-1
104652-2
104652-3
104652-4
104652-5
104652-6
104652-7
104652-8
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
104656-3
–
104656-5
–
104656-7
–
104693-4
104693-5
104693-6
104693-7
104693-8
–
104656-9
1-104652-0
1-104655-1 1-104656-0 1-104693-0
Note:
BLUE part numbers indicate 2D
geometry and 3D CAD models
that are included on CD-ROM.
111
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Board-to-Board Connectors
Standard Edge .050 Series
PCI Connectors
Product Facts:
ꢀ Supports PCI extension
cards derived from the MC
bus
ꢀ For 3.3 and 5 volt signaling
ꢀ Easy mating of high circuit
count daughterboards
ꢀ Choice of plastic pylons or
metal holddowns
ꢀ 32 and 64 bit connectors
available
Material and Finish:
Housing – High temperature
thermoplastic, white
Contacts – Phosphor bronze, duplex
plated:
ꢀ Polarizing web for positive
board-to-board registration
With Plastic Pylons
Style 1
ꢀ Compatible with infrared
(IR) soldering techniques
A - .000030 [0.00076] min. gold over
.000040 [0.00102] min. palladium-
nickel in contact area; .000100
[0.00254] min. tin-lead on soldertails;
all over .000050 [0.00127] min. nickel
underplate
B - Gold flash over .000040 min.
palladium-nickel in contact area;
.000100 [0.00254] min. tin-lead on
soldertails; all over .000050 [0.00127]
min. nickel underplate
With Metal Holddowns
Style 2
No. of
Dual Pos
Housing
Style
Signaling
(V)
Tail
Length
Part
Number
Comment
Finish
.100
2.54
60
60
60
60
92
92
92
1
3.3 & 5
3.3 & 5
3.3 & 5
3.3 & 5
5
32 Bit
A
B
A
B
B
A
A
145154-4
10
.100
2.54
2
1
1
2
1
1
32 Bit
32 Bit
32 Bit
64 Bit
64 Bit
64 Bit
145167-4
145154-8
11299-1
.125
3.17
.125
3.17
.100
2.54
145169-4
145165-8
145166-8
.125
3.17
3.3
.125
3.17
5
Note:
BLUE part numbers indicate 2D
geometry and 3D CAD models
that are included on CD-ROM.
112
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Board-to-Board Connectors
Standard Edge II Series
Connectors — .100 [2.54]
Centerlines
With Vertical Solder Posts, Retention Feature
Product Facts:
ꢀ High reliability and
economy
ꢀ Selective gold plating of
contacts for high
performance at low cost
ꢀ For flow solder applications
ꢀ Accepts double-sided pc
boards .054-.070 [1.27-
1.78] thick
R
R
Material and Finish:
Housing – Glass-filled polyester, black
Contacts – Phosphor bronze, duplex
plated:
Retention Feature
A - .000015 [0.00038] min. gold in
contact area; .000100 [0.00254] min.
tin-lead on soldertails; all over .000050
[0.00127] min. nickel underplate
B - Gold flash in contact area; .000100
[0.00254] min. tin-lead on
No. of
Retention
Feature
Part
Style
Finish
Dual Pos.
Number
soldertails; all over .000050 [0.00127]
min. nickel underplate
52
ISA
Yes
A
176139-2
10
Note:
BLUE part numbers indicate 2D
geometry and 3D CAD models
that are included on CD-ROM.
113
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Engineering Notes
114
Personal Systems Products
www.amp.com
Specifications subject to change
.050 Series I Blindmate
Single Connector
Attachment (SCA 2)
(CHAMP) (Continued)
.050 Series I Blindmate
Single Connector
Attachment (SCA 2)
(CHAMP)
11
Catalog 889409
Revised 6-99
Personal Systems Products
Computer Industry
Disk Drive/CD-ROM Connectors
For SCSI Disk Drives — 80 Position Receptacles & Plugs
.050 Series I Blindmate
Single Connector
Attachment (SCA 2)
(CHAMP)
Product Facts:
ꢀ Single I/O connector for 3.5V
SCSI disk drives
ꢀ Capable of carrying all data,
control, power and
auxiliary signals required
by SCSI
ꢀ Meets the requirements of
EIA-700AOAE
ꢀ Supports narrow and wide
Receptacle – Vertical
SCSI
Receptacle – Vertical,
Extended Height
ꢀ Transitions to Ultra SCSI at
40 Megabyte/Sec.
Part No. 787311-1
(With Keying Post/3.18mm Tail)
Part No. 787900
Part No. 787596-1
(With 4.57mm Tail)
Part No. 788395-1
(With Press-Fit Leads)
Material — Receptacles:
Housing – LCP , UL 94V-0, black
Contacts – Phosphor bronze, plated
0.00076mm min. gold on mating end,
0.00381mm min. tin-lead on solder end,
all over 0.00127mm min. nickel under-
plating
ꢀ Designed for backplane
applications
(With Keying Post/Press-Fit Leads)
ꢀ Completely backward
compatible with CHAMP
.050 Series I connectors
Retention Leg – Brass, plated 0.00381
min. tin-lead over 0.00127 min. nickel
ISO
9001
Certified
Material — Plugs:
Housing – LCP , UL 94V-0, black
Contacts – Phosphor bronze; unless
otherwise specified, plated 0.00076mm
min. gold on mating end, 0.00381mm
min. tin-lead on solder end, all over
0.00127mm min. nickel underplating
Retention Leg – Brass, plated
0.00381mm min. tin-lead over
0.00127mm min. nickel
Receptacle – Right-Angle,
Extended Height
Plug – Vertical
Part No. 84488-1
(With Polarization Post)
Part No. 84488-2
Part No. 787535-1
(With Sequenced Contacts)
(Without Polarization Post)
11
Plug – Straddle Mount
Plug – Right-Angle,
Surface Mount
Part No. 84487-1
Part No. 5-917593-9
(With 0.00076mm min. Gold Plate)
Part No. 917593-9
(For 1.32mm max. thick pc board)
(With 0.0002mm min. Gold Plate)
Note:
BLUE part numbers indicate 2D
geometry and 3D CAD models
that are included on CD-ROM.
116
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 5-99
Personal Systems Products
Computer Industry
Disk Drive/CD-ROM Connectors
For Fibre Channel Disk Drives — 40 Position Receptacles & Plugs
.050 Series I Blindmate
Single Connector
Attachment (SCA 2)
(CHAMP) (Continued)
Product Facts:
ꢀ Single I/O connector for 3.5
Fibre Channel disk drives
ꢀ Capable of carrying all data,
control, power and
auxiliary signals required
by the Fibre Channel
Physical Interface and the
Fibre Channel Loop
Standards
ꢀ Supports EIA-700AOAE
Receptacle – Vertical
Receptacle – Vertical
Extended Height
ꢀ Power sequencing capa-
bilities with two level
sequencing patterns
Part No. 787597-1
(With 4.57mm Tail)
Part No. 788384-1
(With Press-Fit Leads)
Part No. 787317-1
(With Polarization Post)
Part No. 796068-1
ꢀ Popular ribbon-style contacts
Material — Receptacles & Plugs
Housing – Thermoplastic, UL 94V-0,
black
(With Polarizing Post/Press-Fit
Leads)
ꢀ Designed for backplane
applications
Contacts – Phosphor bronze, plated
0.00076mm min. gold on mating end,
0.00381mm min. tin-lead on solder end,
all over 0.00127mm min. nickel under-
plating
ꢀ Completely backward
compatible with CHAMP
.050 Series connectors
Retention Leg – Brass, plated
0.00381mm min. tin-lead over
0.00127mm min. nickel
ISO
9001
Certified
Plug – Straddle Mount
Part No. 84487-2
Plug – Vertical
Part No. 84488-3
(With Polarization Post)
Part No. 84488-4
(Without Polarization Post)
11
117
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Engineering Notes
118
Personal Systems Products
www.amp.com
Specifications subject to change
Keyboard Cables
Page 120
Power Y Cables
Page 120
DB Extension Cables
Page 120
PCMCIA INFOPORT
Page 121
SCSI Adapters &
Terminators
Page 121
12
SCSI Bus Application
Page 122
Ultra ATA Cable Assemblies
Page 121
Catalog 889409
Revised 5-99
Personal Systems Products
Computer Industry
Cable Assemblies and Connectors
Keyboard Cables
IBM Parallel Printer Cables
Organize your work area for maximum
efficiency using our keyboard cables.
Plus, our Y-cable allows you to connect
an external full-size keyboard and
Gain flexibility and efficiency by
positioning your printer in the best
location (up to 50 feet away).
mouse to the bus port of your Thinkpad.
Base Part Numbers: 621787, 621788, 621789, 621790, 621802, 621805,
Base Part Numbers: 621799, 621830, 621833
621806, 621807, 621809, 621810, 621907
IEEE 1284 Parallel Printer Cables
Gender Changers
These cable assemblies were developed
to support the latest high-speed color
printers and assure high-speed two-way
communications for accurate data
Here is an inexpensive alternative to
your gender compatibility problems.
These gender changers will quickly and
easily convert the gender of any parallel,
serial, or video port.
transfer between your PC and printer.
Base Part Numbers: 158392, 158393, 158394, 158395, 319224
Base Part Numbers: 621780 to 621786, 621812, 621815, 621817 to 621828,
621889
DB Extension Cables
Power Y Cables
Let AMP give you the flexibility to
extend connections or replace cable
lengths with these multi-purpose DB-9,
DB25, and DB37 extension cables.
AMP carries the most popular power
“Y” splitter cables including the
combination 3.5" and the dual 5.25"
version.
Base Part Numbers: 621796, 621797, 621801, 621803, 621804, 621808
Base Part Numbers: 621853, 621854, 621855
12
USB Cables
USB Cable Assemblies support the
newest technology for PC “plug and
play” peripheral connectivity. These
cable assemblies, using serial bus
technology, will connect USB equipped
PC’s to keyboards, mice, printers, video
cameras, and more.
Base Part Numbers: 974325, 974326, 974327,974328, 974329, 974538, 974539,
974540
120
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 5-99
Personal Systems Products
Computer Industry
Cable Assemblies and Connectors
SCSI Internal Cables
SCSI-2 Cables
Our quality cables offer 50 pin solutions
in a number of configurations
Also known as FAST SCSI, this cable
solution offers 5 Mbps data transfer rate
and increased functionality over SCSI-1.
Our SCSI-2 cable features the high
impedance wire appropriate for the
faster bus speeds associated with
supporting two, three, or seven drives
with 8” spacing between connections.
Also, our internal drive cables allow for
differentation of Drives “A” and “B”
without requiring dip switch
SCSI-2.
adjustments on the “B” drive.
Additional information on SCSI
terminators is provided on pages
122-124.
Base Part Numbers: 278724, 278725, 278726, 278727
Base Part Numbers: 319283, 621880, 621881, 621882, 621883, 621884
SCSI-3 Cables
SCSI Adapters & Terminators
SCSI-3 is the latest of the ever
AMP has a full complement of SCSI-1,
SCSI-2 and SCSI-3 adapters and
terminators that will meet virtually any
SCSI scenario.
Additional information on SCSI
terminators is provided on pages
122-124.
improving SCSI standards. Sometimes
called the Ultra SCSI, it increases data
through-put up to 20 Mbps in single-
ended applications. AMP also carries
SCSI-3 internal cables and cable
assemblies.
Additional information on SCSI
terminators is provided on pages
122-124.
Base Part Numbers: – 621908, 621909, 621910, 621911, 621912, 621913,
621914, 621915, 621916, 621919, 621920, 621921, 621922, 621923, 621924,
621925, 621926, 621927, 621928, 621929, 750881, 787910, 788349, 788422,
788444, 788495, 796034, 796051, 796073, 868875, 869516, 869546, 869587,
869705, 869725, 869758, 869884, 869888, 869906, 869924, 869992
Base Part Numbers: 158383, 319002, 319032, 319288, 319289, 621885,
621886, 621887, 621888, 621917
High Speed Serial Data Fibre Channel
High Performance Serial Bus IEEE 1394
AMP has developed a line of cable
assemblies for the copper
The IEEE 1394 serial bus can be used as
a low cost high speed to interconnect
peripheral devices. This product has
been implemented in applications
connecting video cameras to PC’s and
set top boxes for home entertainment
systems.
implementations of the serial data
technologies known as Fibre Channel
and Gigabit Ethernet. This cable-to-
board interconnect can handle data
transfer rates of 2.125 Gbits/sec.
Base Part Numbers: 621771, 636145, 636180, 636246, 1324640, 1324641,
Base Part Numbers: – 1324770, 1324771
1324668, 1324670, 1324671, 1324672
Ultra ATA Cable Assemblies
PCMCIA INFOPORT
12
High performance disk drives, Ultra ATA
or DMA drives, give SCSI type
AMP INFOPORT Series I, II and III Cable
Assemblies are designed to meet the
critical input/output requirement of
today’s Type II PC Card applications.
performance for a lower cost. These
higher data transfer speeds require a
controlled impedance cable to reduce
the conductor cross talk that can corrupt
files in the standard cables.
Base Part Numbers: 319964, 319965
Base Part Numbers: 319283, 621880 to 621884
Also available stranded ribbon latch assemblies
Note:
BLUE part numbers indicate 2D
geometry and 3D CAD models
that are included on CD-ROM.
121
Personal System Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 5-99
Personal Systems Products
Computer Industry
Cable Assemblies and Connectors
Introduction
40MB/sec; Differential ter-
mination is limited in speed
capability but can support
longer cable lengths and
more devices; Low Voltage
Differential (LVD), intro-
duced in the SPI-2 stan-
dard, is used in systems
with speeds of 80MB/sec
and above, Forced Perfect
Termination (FPT) is a non-
SCSI termination circuit
designed to function in
Single-Ended applications
that experience a detrimen-
tally high level of electrical
noise.
Figure 1 Sample SCSI Bus Application
The SCSI (Small Computer
Systems Interface) bus is
an electrical transmission
line used to communicate
between a host computer
and its peripherals.
Because a SCSI bus car-
ries high speed electrical
signals, it can be affected
by electrical reflections
which may occur as a result
of an impedance mismatch
within a transmission line
system. A terminator is
designed to closely match
the impedance of a SCSI
bus and consequently mini-
mize the potential for reflec-
tions. The most significant
of impedance mismatches
occur at the end of the bus
where the impedance
These termination circuits
can be found in several dif-
ferent connector interfaces.
Configured for use inside a
shielded enclosure are the
50 position & 68 position
IDCs (Insulation
Displacement Connector),
AMP-LATCH and AMP-
MODU. External (shielded)
terminators are available in
a 50 & 68 position
changes to an open circuit
(infinite impedance).
Cosnequently, a terminator
is placed at each end of the
bus to minimize this effect
(see Fig. 1).
AMPLIMITE .050 Series
and AMP CHAMP.
There are several different
kinds of electrical termina-
tion used in terminators,
dependent upon the speed
requirements and system
compatibility: Single-Ended
Passive is generally used in
SCSI 1 applications with
speed up to 5MB/sec;
Single-Ended Active was
introduced in SCSI 2 and is
used with speeds of up to
10MB/sec (20MB/sec if
used with 16 bit bus as per
SCSI 3); Single-Ended
Considerable work was put
into the development of the
terminator specifications,
most of which is beyond the
scope of this catalog. The
terminators listed on page
xx are appropriate for a vast
majority of SCSI applica-
tions. For more specific
information on the SCSI
documentation or on your
specific application, contact
AMP engineering
Active Negation compatible
terminators can accommo-
date speeds of up to
12
122
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 5-99
Personal Systems Products
Computer Industry
Cable Assemblies and Connectors
ꢀ Forced Perfect
ꢀ Low Voltage Differential
(LVD)
Choosing a Terminator
ꢀ Active – Also referred
to as “Regulated” or
“Boulay”
Termination (FPT)
Each system or network
design will determine the
type of terminator required
as per the SCSI
• Deals with applications
wherein the larger
bandwidth and faster
rise-times create
• Uses integrated circuit
technology for optimum
performance
• Uses a voltage
regulation and 110Ω
resistors
standard/documentation.
The objective is to achieve
desired impedance match-
ing throughout the network.
Parameters important in
selecting the proper termi-
nator include: data trans-
mission speed, cable mix
(i.e. ribbon cable to twisted
pair), cable lengths, power
requirements and the num-
ber of peripherals connect-
ed to the bus.
• Speeds in excess of
80MB/sec
(40MTransfers/sec)
special problems. The
complexity of cable
systems, the variations
in terminating devices,
and the variables in the
impedances present in
the systems involved,
have a tendency to
degrade signal integrity
that is marginal at best.
The FPT compensates
for these variances by
averaging the
impedance mismatches
through diode switching
and biasing techniques
in such a way that the
signal sees the
characteristic impedance
that it needs to see by
forcing the coexistence
of the mismatched
• Speeds of up to
10MB/sec
(5MTransfers/sec) in an
8-bit bus
• Cable lengths of up to
25 meters
• Speeds of up to
20MB/sec
(10MTransfers/sec) in
a 16-bit bus
• Maximum number of
devices is 16
• Cable lengths of up to 6
meters
• Maximum number of
devices is 8 for 8-bit
bus
Selecting a Termination
Circuit
ꢀ Passive
ꢀ Active Negation
Compatible
• Uses a passive network
of 220Ω and 330Ω
resistors
• Compatible with Active
Negation drivers - Able
to sink current as well
as source current
• Speeds of up to
5MB/sec
(2.5MTransfers/sec)
• Uses integrated circuit
technology for optimum
performance
impedances.
• Cable lengths of up to 6
meters
ꢀ Differential
• Requires more powerful
drivers than single-
ended which can not be
incorporated on the
SCSI controller IC. This
dictates the need for an
external IC thereby
increasing overall system
space requirements
and costs.
• Speeds of up to
20MB/sec
(10MTransfers/sec) in
an 8-bit bus
• Max. number of devices
is 8
• Speeds of up to
40MB/sec
(20MTransfers/sec) in
a 16-bit bus
• Cable lengths of up to 3
meters
• Uses a passive network
of 330Ω/150Ω/330Ω
resistors
• Maximum number of
devices is 8 for 8-bit
bus & 16 for 16-bit bus
• Speeds of up to
10MB/sec
12
(5MTransfers/sec)
• Cable lengths of up to
25 meters
• Max. number of devices
is 16
123
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 5-99
Personal Systems Products
Computer Industry
Cable Assemblies and Connectors
SCSI Terminator Selection Matrix
Max. Speed
Number of
Devices
Max. Tot. Cable
Length
AMP Part No.
Names
SCSI-1
Uses
(Mb/s)
Terminators/Active IC
Passive Components
50 Posn. 0.050: 750881-1
Champ: 868875-1
SCSI-1
SCSI-2
5
8
8
6 M (SE)`
Scanners, Zip drives, hard drives,
etc.
AMP Latch: 869587-1
Linear Tech: LT1117CST-2.85
Burr-Brown: REG1117-2.85
Motorola: MC34268D
SemTech: EZ1117CST-2.85
68 Posn. 0.025 CL IDC: 869888-1
50 Posn. 0.050 CL IDC: 796034-1
50 Posn. 0.050: 869546-1
68 Posn. 0.050: 869516-1
Champ: 869924-2
SCSI-2
(Fast Narrow)
10
Desktop hard drives, scanners
CD-ROM drives, CD-Recordable
drives, and removables.
Faster hard drives, workstations
servers and RAID systems
6 M (SE)
25 M (D)
Fast Wide SCSI
(Wide SCSI)
20
16
AMP Latch: 869884-2
Motorola: MCCS!42237DTR2
Dallas: DS21T07
Ultra SCSI
(SCSI-3, Fast-20,
Ultra Narrow)
68 Posn. 0.025 CL IDC: 869705-1
50 Posn. 0.050 CL IDC: 787910-1
50 Posn. 0.050: 869992-1
68 Posn. 0.050: 869725-1
Champ: 869906-1
20
40
8
< 4 devices 3 M (SE)
> 4 devices 1.5M (SE) performance desktop, workstations,
12 M (LVD)
25 M (LVD P-P)
Newer and faster hard drives,
SCSI-3
servers, RAID systems.
Backword compatible with previous
SCSI versions.
Wide Ultra SCSI
16
AMP Latch: 869758-2
(Fast Wide 20)
Unitrode: UC560
68 Posn. 0.025 CL IDC: 788495-1
Unitrode: UCC5630, 5510
68 Posn. 0.050 Int.: 788444-1
68 Posn. 0.025 CL IDC: 796073-1
68 Posn. 0.050: 796051-1
0.8mm Champ: 788349-1
Unitrode: UCC5640
Ultra2 SCSI
40
80
8
12 M (LVD)
25 M (LVD P-P)
Wide Ultra2 SCSI
16
Ultra3 SCSI
80
8
12 M (LVD)
Wide Ultra3 SCSI
160
16
25 M (LVD P-P)
68 Posn. 0.025 CL IDC: 788422-1
12
124
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Numerical Index
Note: This index lists all cataloged parts by
base no. only. Complete part nos. (with
prefixes and/or suffixes) are shown on the
page(s) indicated.
Part No.
120524
120525
120526
120527
120528
120529
120530
120531
120532
120533
120534
120591
120603
120605
120613
120615
120623
145064
145090
145154
145165
145166
145167
145169
145209
145236
145244
145275
145282
145300
145308
145376
145386
145400
145410
145417
145418
145419
145420
145427
145510
145511
145518
145519
146205
146315
146761
146784
146839
146862
146881
147254
158383
158392
158393
158394
158395
173977
173981
174681
174683
175487
Page
107
107
107
107
107
107
107
107
107
107
107
38
Part No.
175677
Page
63
Part No.
316433
Page
40
175887
176139
176372
176379
176380
176381
176793
177029
177728
177734
177980
177983
177984
177985
177986
178238
179009
179010
179030
179031
179135
179136
179139
179140
179141
179656
179657
205202
205203
205204
205205
205206
205207
205208
205209
205210
205211
205212
205434
205436
205439
205441
205442
207463
207464
207516
207661
210862
278724
278725
278726
278727
278753
278756
316076
316077
316135
316160
316163
316317
316318
63
316435
316418
316422
316427
316429
316559
316560
316562
319002
319032
319224
319283
319288
319289
319964
319965
353068
353069
353118
353119
353134
353135
353183
353184
353185
353186
353187
353188
353190
353206
353231
353232
353233
353284
353293
353294
353297
353324
353327
353303
353308
353320
353322
353388
353455
353446
353471
353521
353524
353527
353530
353692
353831
353870
353871
353902
353907
353908
353917
353918
353919
39
113
108
108
108
108
63
68
Part No.
11299
Page
32
68
68
11258
76
68
11313
72
103
102
103
121
121
120
121
121
121
121
121
88
11314
72
11315
72
105
74, 77
74, 77
106
106
105
106
105
63
11299
112, 113
77
11355
66504
47, 48
47, 48
47, 48
47
66506
107
97
66507
66682
97
84376
64
81
84415
87
97
84487
116
116
117
117
106
99
34
106
106
105
105
73
84488
34
88
84487
32, 112
32, 112
32, 112
112
32
88
84488
88
84616
104
104
33, 103
103
103
103
103
103
33, 102
104
104
104
104
104
89
102972
102973
102976
102977
103185
103186
103239
103240
103308
103309
103310
103311
103321
103322
103327
103327
103328
103741
103747
103777
103783
103916
104068
104069
104078
104582
104652
104655
104656
104693
109277
111196
111715
111735
111782
111891
120521
120591
120523
120524
73
99
73
99
35
77
99
34
73
99
34
108
108
47
99
36
99
36
99
82, 83
12
46
98
46
98
35
46
98
35
46
98
35
46
99
35
46
99
12
46
99
12
46
93
99
12
46
91
99
12
46
66, 67
66, 67
91
99
35
46
99
14
46
99
14
46
94
99
35
46
93
110
110
110
110
98
12
46
94
15
46
59
15
46
59
15
46
86
81
46
103
92
111
111
111
111
99
81
11
15
121
121
121
121
60
92
81
92
15
92
121
120
120
120
120
95
103
103
29
110
98
60
97
103
102
103
40
29
98
73
96
89
107
38
95
90
109
109
95
39
89
107
107
102
102
89
89
125
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Numerical Index
Note: This index lists all cataloged parts by
base no. only. Complete part nos. (with
prefixes and/or suffixes) are shown on the
page(s) indicated.
Part No.
557101
557102
557103
621745
621746
621747
621771
621772
621773
621774
621775
621776
621780
621781
621782
621783
621784
621785
621786
621787
621788
621789
621790
621796
621797
621799
621801
621802
621803
621804
621805
621806
621807
621808
621809
621810
621812
621815
621817
621818
621819
621820
621821
621822
621823
621824
621825
621826
621827
621828
621830
621833
621853
621854
621855
621880
621881
621882
621883
621884
621885
621886
Page
109
Part No.
621887
Page
121
121
120
120
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
121
61, 120
99
Part No.
747306
Page
55
46
46
46
46
46
46
46
46
46
46
45
45
50
50
50
50
50
50
50
50
46
47
47
47
47
47
47
47
47
47
45
44
44
44
44
44
49
49
44
44
44
44
44
45
45
45
45
45
49
49
46
46
44
44
44
44
44
45
44
44
44
109
621888
621899
621907
621908
621909
621910
621911
621912
621913
621914
621915
621916
621917
621919
621920
621921
621922
621923
621924
621925
621926
621927
621928
621929
636145
636180
636246
636315
640456
641215
644486
644487
719193
745036
745135
745229
745230
745253
745254
745781
745782
745783
745784
745884
745906
745907
745908
745909
746285
746288
746290
746789
746790
747043
747052
747236
747238
747250
747252
747275
747303
747522
747523
747538
747539
747554
747555
747570
747571
747577
747578
747579
747580
747840
747841
747842
747843
747844
747845
747846
747847
747883
747951
747952
747953
747954
747955
747956
747957
747959
747960
748333
748364
748365
748366
748367
748368
748390
748394
748468
748469
748470
748471
748472
748473
748474
748475
748476
748477
748481
748482
748526
748536
748565
748566
748567
748568
748569
748610
748634
748635
748636
109
Part No.
353948
Page
86
71
71
71
71
69
69
18
18
18
25
25
25
21
25
25
25
21
25
25
25
21
28
28
28
28
28
26
27
27
27
30
20
19
19
19
19
20
30
26
29
18
18
18
34
54
54
45
95
95
95
87
96, 97
96
21
15
15
109
61, 120
61, 120
61, 120
121
353952
353960
353966
353967
368751
368756
382394
382396
382434
382483
382486
382487
382575
382700
382756
382796
382811
382903
382927
385486
390088
390110
390111
390112
390113
390114
390168
390170
390175
390213
390217
390221
390228
390229
390230
390231
390233
390238
390240
390241
435640
435668
435802
440176
440407
440408
474579
487547
487558
487937
487952
499252
499997
531230
532955
532956
557100
61,120
61,120
61,120
61,120
61,120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
99
120
99
120
99
120
57
120
46
120
46
120
47
120
47
120
47
120
47
120
50
120
50
120
50
120
46, 50
46
120
120
46
120
46
120
46
120
46
120
96
120
96
120
96
120
55
120
55
120
55
121
55
121
50
121
50
121
50
121
50
121
55
121
55
126
Personal Systems Products
www.amp.com
Specifications subject to change
Catalog 889409
Revised 6-99
Numerical Index
Note: This index lists all cataloged parts by
base no. only. Complete part nos. (with
prefixes and/or suffixes) are shown on the
page(s) indicated.
Part No.
750598
750601
750613
750636
750644
750752
750881
767225
786090
786096
786161
786387
786766
786929
787004
787066
787082
787131
787169
787170
787171
787190
787191
787201
787202
787203
787266
787311
787317
787341
787342
787343
787344
787345
787346
787362
787506
787535
787616
787617
787650
787652
787596
787597
787775
787780
787834
787851
787855
787882
787883
787885
787886
787887
787908
787913
787950
787956
787900
787910
787962
788384
Page
52
Part No.
788395
Page
116
14
Part No.
916716
Page
10
52
788398
788362
788349
788422
788433
788444
788450
788451
788489
788490
788491
788495
788506
788508
788555
788573
788574
788575
788603
788624
788626
788643
788667
788740
794304
794305
794312
794313
794415
794444
796019
796034
796051
796055
796068
796073
796136
799278
821942
822021
822030
822090
822110
822134
822269
822472
868875
869516
869546
869587
869705
869725
869758
869884
869888
869906
869924
869992
881545
916583
916668
916732
11
52
62
916769
11
Part No.
748637
Page
44
44
45
45
45
45
45
50
50
50
50
50
50
50
50
50
50
50
50
56
56
57
57
57
64
64
57
57
57
57
57
57
57
57
64
64
48
58
57
49
58
57
56
46
49
49
49
57
57
57
52
52
52
52
52
52
52
52
46
121
121
53
916783
10
56
917042
74
748638
748639
748640
748641
748642
748643
748836
748875
748876
748877
748878
748879
748881
748955
748956
748957
748959
748961
749069
749070
749080
749081
749111
749179
749180
749192
749193
749195
749196
749202
749204
749206
749210
749266
749267
749564
749611
749621
749639
749656
749699
749721
749763
749767
749769
749771
749854
749889
749925
750585
750586
750587
750589
750590
750591
750594
750597
57
917043
74
121
13
121
75
917044
74
917045
74
58
76
917301
74
58
51
917302
74
58
51
917593
116
86
53
51
917680
64
121
64
917738
63
46
953398
82
62
53
953438
82, 83
120
120
120
120
120
120
120
120
61
49
13
974325
56
51
974326
62
51
974327
56
51
974328
56
53
974329
56
49
974538
56
52
974539
62
81
974540
55
81
1116151
1123066
1123076
1123078
1123204
1123315
1123316
1123318
1123319
1123441
1123537
1123548
1123599
1123607
1123608
1123616
1123684
1123738
1123783
1123822
1123843
1123846
1123902
1123992
1318138
1318140
1318142
1324640
1324641
1324668
1324670
1324671
1324672
1324770
1324771
1381141
55
49
80
55
41
60
56
41
81
116
117
48
41
81
41
66, 67
67
41
48
41
66, 67
67
48
13
48
121
121
62
71
48
80
48
80
56
117
121
38
70
49
70
116
61
70
11
70
61
21
39
55
24
39
55
24
80
116
117
62
24
39
24
59
24
66, 67
80
61
18
61
18
33
75, 76
75
121
121
121
121
121
121
121
121
121
121
121
121
21
59
59
75
59
75
121
121
121
121
121
121
121
121
59
75
76
76
46
76
60
60
116
121
62
10
117
10
127
Personal Systems Products
www.amp.com
Specifications subject to change
www.amp.com
AMP Business Centers, Worldwide
Americas
Related Businesses
Argentina – Buenos Aires
Phone: + 54-1-733-2000
Fax: + 54-1-717-0988
Chile – Santiago
Phone: + 56-2-739-1230
Fax: + 56-2-739-1227
United States – Harrisburg, PA
Phone: + 1-717-564-0100
Fax: + 1-717-986-7575
ARA-Applied Robotics Division
Rousset, France
Phone: + 33-4-42-29-1200
Fax: + 33-4-42-29-1212
Brazil – Sao Paulo
Phone: + 55-11-861-1311
Fax: + 55-11-861-0397
Colombia – Bogota
Phone: + 57-1-231-9398
Fax: + 57-1-240-3769
Venezuela – Caracas
Phone: + 58-2-986-7774
Fax: + 58-2-986-9739
DSM Decolletage S.A.
Saint-Maurice
Phone: + 41-24-486-2486
Fax: + 41-24-486-2400
Canada – Toronto
Phone: + 1-905-475-6222
Fax: + 1-905-474-5520
Mexico – Mexico City
Phone: + 52-5-729-0400
Fax: + 52-5-361-8545
For Latin/South American
Countries not shown
Phone: +54-11-4733-2015
Fax: +54-11-4733-2083
Fibernet Division
Rowville, Australia
Phone: + 61-3-9764-2111
Fax: + 61-3-9764-2120
M/A-COM Division
Americas
Asia/Pacific
Lowell, MA, USA
Australia – Sydney
Phone: + 61-2-9840-8200
Fax: + 61-2-9899-5649
Malaysia – Kuala Lampur
Phone: + 603-705-3055
Fax: + 603-705-3066
Philippines – Makati City
Phone: + 632-867-8641
Fax: + 632-867-8661
Phone: + 1- 978-442-5000
Fax: + 1-978-442-5354
Europe/Middle East/Africa
Bracknell, England
Phone: + 44-1344-869-595
Fax: + 44-1344-300-020
India – Bangalore
Phone: + 91-80-841-0200
Fax: + 91-80-841-0210
New Zealand – Auckland
Phone: + 64-9-634-4580
Fax: 64-9-634-4586
Singapore – Singapore
Phone: + 65-482-0311
Fax: + 65-482-1012
Asia/Pacific
Indonesia – Jakarta
Phone: + 6221-526-7852
Fax: + 6221-526-7856
People’s Republic of China
Hong Kong
Taiwan – Taipei
Phone: + 886-2-2325-0391
Fax: + 886-2-2325-0398
Hong Kong
Phone: + 85-2-2111-8088
Fax: + 85-2-2111-8087
Phone: + 852-2735-1628
Fax: + 852-2735-0243
Japan – Tokyo
Phone: + 81-44-844-8111
Fax: + 81-44-812-3207
Thailand – Bangkok
Phone: + 66-2-955-0500
Fax: + 66-2-955-0505
Shanghai
Phone: + 86-21-6485-0602
Fax: + 86-21-6485-0728
Korea – Seoul
Phone: + 82-2-3274-0535
Fax: + 82-2-3274-0524/0531
Vietnam – Ho Chi Minh City
Phone: + 84-8-8232-546/7
Fax: + 84-8-8221-443
Shunde
Phone: + 86-765-7751368
Fax: + 86-765-7752823
Europe/Middle East/Africa
France – Pontoise
Phone: + 33-1-34-20-88-88
Fax: + 33-1-34-20-86-00
Austria – Vienna
Sweden – Stockholm
Phone: + 46-8-580-833-00
Fax: + 46-8-580-194-70
Norway – Oslo
Phone: + 47-66-77-88-50
Fax: + 47-66-77-88-80
Inside: Phone: + 0222-277-97-0
Fax: + 0222-270-26-61
Outside: Phone: + 43-1-277-97-0
Fax: + 43-1-270-26-61
Germany – Langen
Phone: + 49-6103-709-0
Fax: + 49-6103-709-223
Switzerland – Steinach
Phone: + 41-71-447-0447
Fax: + 41-71-447-0444
Poland – Warsaw
Phone: + 48-22-672-47-90/91
Fax: + 48-22-672-47-88
Belgium – Brussels
Phone: + 32-2-719-2511
Great Britain – London
Phone: + 44-181-954-2356
Fax: + 44-181-954-6234
Turkey – Istanbul
Phone: + 90-212-281-8181
Fax: + 90-212-281-8184
Portugal – Lisbon
Phone: + 351-1-387-70-16
Fax: + 351-1-387-71-72
Fax: + 32-2-725-4928
Bulgaria – Sofia
Phone: + 359-2-971-2152
Greece – Athens
Phone: + 30-1-937-0396/7
Fax: + 30-1-937-0655
Ukraine – Kiev
Phone: + 38-044-246-5501
Fax: + 38-044-246-5501
Romania – Bucharest
Phone: + 40-1-311-3479/3596
Fax: + 40-1-312-0574
Fax: + 359-2-971-2153
Croatia – Zagreb
Phone: + 385-1-67-04-46
Holland – ’s-Hertogenbosch
Phone: + 31-73-624-6246
Fax: + 31-73-621-2365
Russia
Moscow
Phone: + 7-095-926-5509
Fax: + 7-095-926-5505
Fax: + 385-1-69-16-04
For Middle East/African
Countries not shown
Phone: +33-1-34-20-83-83
Fax: +33-1-34-20-86-09
Czech Republic – Kurim
Phone: + 420-5-41-162-111
Fax: + 420-5-41-162-223
Hungary – Budapest
Phone: + 36-1-350-8633
Fax: + 36-1-350-8634
St. Petersburg
Phone: + 7-812-325-3083
Fax: + 7-812-325-3288
Denmark – Viby
Phone: + 45-86-295-055
Fax: + 45-86-295-133
Ireland – Dublin
Phone: + 353-1-820-3000
Fax: + 353-1-820-9790
Slovakia – Bystrica
Phone: + 421-88-761-120
Fax: + 421-88-761-122
Egypt – Cairo
Phone: + 202-417-76-47
Fax: + 202-419-23-34
Israel – Tel Aviv
Phone: + 972-3-649-14-82
Fax: + 972-3-648-40-41
Slovenia – Ljubljana
Phone: + 386-61-161-3270
Fax: + 386-61-161-3240
Estonia – Tallinn
Phone: + 372-6205-800
Fax: + 372-6205-804
Italy – Torino
Phone: + 39-011-401-2111
Fax: + 39-011-403-1116
South Africa – Midrand
Phone: + 27-11-314-10-89
Fax: + 27-11-314-19-10
Finland – Helsinki
Phone: + 358-9-512-3420
Fax: + 358-9-512-34250
Lithuania – Vilnius
Phone: + 370-2-231-402
Fax: + 370-2-231-403
Spain – Barcelona
Phone: + 34-93-291-0330
Fax: + 34-93-201-7879
Printe d in USA
AMP is a trademark.
Rev. 5, 6/99
A !@#$ INTERNATIONAL LTD. COMPANY
A !@#$ INTERNATIONAL LTD. COMPANY
889409—5M—MS—FP—6-99
Printed in USA
Rev. 2, 6/99
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明