AP-CF002GA5GS-NDRM [ETC]
Compact Flash 4 Series;型号: | AP-CF002GA5GS-NDRM |
厂家: | ETC |
描述: | Compact Flash 4 Series |
文件: | 总23页 (文件大小:1459K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
RoHS Compliant
Compact Flash 4 Series
Specification for Industrial CF
November 17, 2009
Version 1.1
Apacer Technology Inc.
4th Fl., 75 Hsin Tai Wu Rd., Sec.1, Hsichih, Taipei Hsien 221, Taiwan
Tel: +886-2-2698-2888
www.apacer.com
Fax: +886-2-2698-2889
Compact Flash 4 series
AP-CFxxxxA5XS-XXXXXX
Features:
CompactFlash Association Specification
Revision 4.1 Standard Interface
Temperature ranges
–
–
Operation: 0°C to 70°C (Standard)
-40°C to 85°C(ET*)
Storage: -40°C to 100°C
–
–
–
512 bytes per sector
ATA command set compatible
ATA mode support for up to:
PIO Mode-6
Multiword DMA Mode-4
Ultra DMA Mode-6
Support for voltage read and write
operations
–
3.3 V or 5 V
Low power consumption (typical)
Active mode: 95 mA/ 90 mA (3.3 V/ 5 V)
Sleep mode: 0.2 mA/ 0.2 mA (3.3 V/ 5 V)
Capacities
–
–
–
256, 512 MB
1, 2, 4, 8, 16 GB
Connector Type
Sustained read performance
–
–
50 pins female
–
–
–
Up to 50 MB/sec
Physical Dimensions
Sustained write performance
36.4mm x 42.8mm x 3.3mm
Up to 21 MB/sec
RoHS compliant
Flash management
Advanced wear-leveling algorithms to
substantially increase longevity of flash
media
–
Built-in ECC support for correcting up to
8/15 random single-bit errors per 512-
byte sector
–
–
–
Read Recovery Technology
Power Failure Recovery
S.M.A.R.T. Technology
NAND Flash Type: SLC
*Extended Temperature
1
© 2009 Apacer Technology Inc.
Rev. 1.1
Compact Flash 4 series
AP-CFxxxxA5XS-XXXXXX
Table of Contents
1. GENERAL DESCRIPTION ......................................................................................... 3
1.1 PERFORMANCE-OPTIMIZED CONTROLLER ...........................................................................................3
1.1.1 FIFO Buffer..............................................................................................................................3
1.1.2 Error Correction Code (ECC) ...................................................................................................3
2. FUNCTIONAL BLOCK ............................................................................................... 4
3. PIN ASSIGNMENTS................................................................................................... 5
4. CAPACITY SPECIFICATION ..................................................................................... 7
4.1 PERFORMANCE SPECIFICATION..........................................................................................................7
4.2 ENVIRONMENTAL SPECIFICATIONS......................................................................................................7
5. FLASH MANAGEMENT ............................................................................................ 8
5.1 ADVANCED WEAR LEVELING ..............................................................................................................8
5.2 READ RECOVERY TECHNOLOGY.........................................................................................................8
5.3 POWER FAILURE RECOVERY..............................................................................................................8
5.4 S.M.A.R.T. TECHNOLOGY.................................................................................................................8
6. SOFTWARE INTERFACE ......................................................................................... 9
6.1 CF-ATA COMMAND SET ...................................................................................................................9
7. ELECTRICAL SPECIFICATION.............................................................................. 11
7.1 ABSOLUTE MAXIMUM RATINGS......................................................................................................... 11
7.2 RECOMMENDED OPERATING CONDITIONS ......................................................................................... 11
7.3 DC CHARACTERISTICS .................................................................................................................... 12
7.4 CAPACITANCE ................................................................................................................................ 12
7.5 INTEGRATED SERIES TERMINATION RESISTOR ................................................................................... 12
7.6 POWER SUPPLY SEQUENCE ............................................................................................................ 13
7.7 SETUP TIME...................................................................................................................................13
8. PHYSICAL CHARACTERISTICS............................................................................ 14
8.1 DIMENSION ....................................................................................................................................14
9. PRODUCT ORDERING INFORMATION................................................................. 15
9.1 PRODUCT CODE DESIGNATIONS....................................................................................................... 15
9.2 VALID COMBINATIONS ..................................................................................................................... 16
9.2.1 Standard Temperature.......................................................................................................... 16
9.2.2 Extended Temperature ......................................................................................................... 18
2
© 2009 Apacer Technology Inc.
Rev. 1.1
Compact Flash 4 series
AP-CFxxxxA5XS-XXXXXX
1. General Description
Apacer’s Compact Flash 4 offers the most reliable and high performance storage which is compatible with
CF Type I and Type II devise. Unlike the others, Apacer Compact Flash 4 provides solid traceability to
ensure all products HW/SW are the same as you qualified.
Apacer’s Compact Flash 4 complies with the interfaces, such as the commands, timings, and protocols
based on the Compact Flash Specification (CFA standard), and operates as the PC Card ATA interface
providing complete PCMCIA - ATA functionality and compatibility. Apacer ‘s Compact Flash 4 is designed
for use in Point of Sale (POS) terminals, telecom, IP-STB, medical instruments, surveillance systems,
industrial PCs and handheld applications.
1.1 Performance-Optimized Controller
Compact Flash 4 Controller translates standard CF signals into flash media data and control signals.
1.1.1 FIFO Buffer
Compact Flash 4 Controller performs as an FIFO buffer to optimize the host’s data transfer to and from
the flash media for reliable storage via performing data correction and moving data to another block in
case of the correctable error.
1.1.2 Error Correction Code (ECC)
Compact Flash 4 adopts Error Detection Code (EDC) and Error Correction Code (ECC) algorithms which
correct up to 8/15 random single-bit errors for each 512-byte block of data.
High performance is achieved through hardware-based error detection and correction.
3
© 2009 Apacer Technology Inc.
Rev. 1.1
Compact Flash 4 series
AP-CFxxxxA5XS-XXXXXX
2. Functional Block
Compact Flash 4 Card includes a controller and flash media, as well as the standard Compact Flash
interface. Figure 2-1 shows the functional block diagram.
Flash Array
Flash
Media
Flash
Media
Compact Flash
Controller
Compact Flash
Interface
Flash
Media
Flash
Media
Figure 2-1: Functional block diagram
4
© 2009 Apacer Technology Inc.
Rev. 1.1
Compact Flash 4 series
AP-CFxxxxA5XS-XXXXXX
3. Pin Assignments
Table 3-1 lists the pin assignments with respective signal names for the 50-pin configuration. A “#” suffix
indicates the active low signal. The pin type can be input, output or input/output.
Table 3-1: Pin assignments (1 of 2)
Pin No.
Memory card mode
I/O card mode
True IDE mode
Signal name Pin I/O type
Signal name
Pin I/O type
Signal name Pin I/O type
1
2
GND
D3
-
I/O
GND
D3
-
I/O
GND
D3
-
I/O
3
D4
I/O
D4
I/O
D4
I/O
4
D5
I/O
D5
I/O
D5
I/O
5
D6
I/O
D6
I/O
D6
I/O
6
D7
I/O
D7
I/O
D7
I/O
7
8
9
#CE1
A10
#OE
A9
A8
A7
VCC
A6
A5
A4
A3
A2
A1
A0
D0
D1
D2
WP
I
I
I
I
I
I
-
I
I
I
I
I
I
#CE1
A10
#OE
A9
A8
A7
VCC
A6
A5
A4
A3
A2
A1
A0
D0
D1
D2
#IOIS16
#CD2
#CD1
D11
D12
D13
D14
D15
#CE2
#VS1
#IORD
#IOWR
#WE
#IREQ
VCC
#CSEL
#VS2
RESET
I
I
I
I
I
I
-
I
I
I
I
I
I
#CS0
A101
#ATA SEL
A91
I
I
I
I
I
I
-
I
I
I
I
I
I
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
A81
A71
VCC
A61
A51
A41
A31
A2
A1
A0
D0
D1
D2
I
I
I
I/O
I/O
I/O
O
O
O
I/O
I/O
I/O
I/O
I/O
I
O
I
I
I
O
-
I/O
I/O
I/O
O
O
O
I/O
I/O
I/O
I/O
I/O
I
O
I
I
I
O
-
I/O
I/O
I/O
O
O
O
I/O
I/O
I/O
I/O
I/O
I
O
I
I
I
O
-
#IOCS16
#CD2
#CD1
D11
#CD2
#CD1
D11
D12
D13
D14
D15
#CE2
#VS1
#IORD
#IOWR
#WE
RDY/-BSY
VCC
#CSEL
#VS2
RESET
D12
D13
D14
D15
#CS1
#VS1
#IORD
#IOWR
#WE
INTRQ
VCC
#CSEL
#VS2
#RESET
I
O
I
I
O
I
I
O
I
5
© 2009 Apacer Technology Inc.
Rev. 1.1
Compact Flash 4 series
AP-CFxxxxA5XS-XXXXXX
Table 3-1: Pin assignments (2 of 2)
Pin No.
Memory card mode
Signal name Pin I/O type
I/O card mode
True IDE mode
Signal name
Pin I/O type
Signal name Pin I/O type
42
43
44
45
46
47
48
49
50
#WAIT
#INPACK
#REG
BVD2
BVD1
D8
D9
D10
GND
O
O
I
O
O
I/O
I/O
I/O
-
#WAIT
#INPACK
#REG
#SPKR
#STSCHG
D8
O
O
I
O
O
I/O
I/O
I/O
-
IORDY
DMARQ2
DMACK2
#DASP
#PDIAG
D8
D9
D10
GND
O
O
I
O
O
I/O
I/O
I/O
-
D9
D10
GND
1. The signal should be grounded by the host.
2. Connection required when UDMA is in use.
6
© 2009 Apacer Technology Inc.
Rev. 1.1
Compact Flash 4 series
AP-CFxxxxA5XS-XXXXXX
4. Capacity Specification
Capacity specification of Compact Flash 4 series is available as shown in Table 4-1. It lists the specific
capacity and the default numbers of heads, sectors and cylinders for each product line.
Table 4-1: Capacity specifications
Capacity
256 MB
512 MB
1GB
Total bytes1,2
256,901,120
Cylinders
980
Heads
16
Sectors
32
Max LBA
501,760
512,483,328
993
16
63
1,000,944
2,001,888
4,001,760
8,027,712
16,007,040
32,014,080
1,024,966,656
2,048,901,120
4,110,188,544
8,195,604,480
16,391,208,960
1,986
3,970
7,964
15,880
16,3833
16
63
2GB
16
63
4GB
16
63
8GB
16
63
16GB
16
63
1. Total bytes includes reserved block.
2. Display of total bytes varies from operating systems.
3. Cylinders, heads or sectors are not applicable for these capacities. Only LBA addressing applies
4.1 Performance Specification
Performances of Compact Flash 4 are listed below.
Table 4-2: Performance specifications
Capacity
256 MB
512 MB
1 GB/ 2 GB
43
4 GB/ 8 GB
16 GB
Performance
Sustained read (MB/s)
Sustained write (MB/s)
32
10
46
17
50
21
15~17
4.2 Environmental Specifications
Environmental specification of Compact Flash 4 series follows the MIL-STD-810F standards as shown in
Table 4-3.
Table 4-3: Environmental specifications
Environment
Specification
Operation
Storage
0°C to 70°C; -40°C to 85°C (Extended Temperature)
-40°C to 100°C
Temperature
Humidity
5% to 95% RH (Non-condensing)
Vibration (Non-Operation)
Shock (Non-Operation)
Sine wave: 10~2000Hz, 15G (X, Y, Z axes)
Half sine wave, Peak acceleration 50 G, 11 ms (X, Y, Z ; All 6 axes)
7
© 2009 Apacer Technology Inc.
Rev. 1.1
Compact Flash 4 series
AP-CFxxxxA5XS-XXXXXX
5. Flash Management
5.1 Advanced Wear Leveling
The goal of advanced wear leveling algorithms is to evenly spread the program and erase cycles on the
area of programmed and erased multiple times and the area of programmed one and read multiple times
among the available blocks in the flash array.
5.2 Read Recovery Technology
Read Recovery Technology enables reliable storage. When it is detected correctable error during read
command operation, all data of related block is corrected and is moved to other block. Since it continues
to read data after recovery operation, read data is the same as no error data for host system. However,
since data transfer is stopped temporarily, the output time of BSY signal becomes long. In order to
perform Read Command Recovery, it is necessary to set up the threshold for the number of detected
error bit. Read Command Recovery is performed by following commands.
READ DMA
READ MULTIPLE
READ SECTOR(S)
READ VERIFY SECTOR(S)
5.3 Power Failure Recovery
The controller enables to reduce data loss in case of sudden power fail. Once power was failure before
cached data writing back into flash, data in the cache will lost. The next time the power is on, the
controller will check these fragmented data segment, and, if necessary, replace them with old data kept in
flash until programmed successfully.
5.4 S.M.A.R.T. Technology
S.M.A.R.T. is an acronym for Self-Monitoring, Analysis and Reporting Technology and enables to expect
the endurance of flash memory. The S.M.A.R.T. function protects the user from unexpected fault of
product. The S.M.A.R.T function enables to predict the occurrence of near-term degradation or fault
conditions by monitoring and storing critical parameters of flash memory (ex. Number of bad block,
maximum number of erase, etc). The host system is warned of a negative reliability condition which is the
impending risk of data loss by the S.M.A.R.T. function. Then the user can take appropriate action to
minimize the risk.
8
© 2009 Apacer Technology Inc.
Rev. 1.1
Compact Flash 4 series
AP-CFxxxxA5XS-XXXXXX
6. Software Interface
6.1 CF-ATA Command Set
Table 6-1 summarizes the CF-ATA command set with the paragraphs that follow describing the individual
commands and the task file for each.
Table 6-1: CFC-ATA command set (1/2)
Command
Code
Command Protocol
CFA Erase-Sector(s)
C0H
Non-data
CFA Request Extended Error Code
CFA Translate-Sector
CFA Write-Multiple-Without-Erase
CFA Write-Sector(s)-Without-Erase
Check-Power-Mode
Download Microcode
Execute-Drive-Diagnostic
Flush-Cache
03H
87H
CDH
38H
Non-data
PIO data-in
PIO data-out
PIO data-out
E5H or 98H Non-data
92H
90H
E7H
50H
ECH
PIO data-out
Device Diagnostic
Non-data
Format-Track
PIO data-out
PIO data-in
Identify-Drive
Idle
E3H or 97H Non-data
E1H or 95H Non-data
Idle-Immediate
Initialize-Drive-Parameters
NOP
91H
00H
E4H
Non-data
Non-data
PIO data-in
Read-Buffer
Read DMA
C8H or C9H DMA
Read Long
22h or 23h
C4H
PIO data-in
PIO data-in
Read-Multiple
Read-Sector(s)
20H or 21H PIO data-in
40H or 41H Non-data
Read-Verify-Sector(s)
Recalibrate
1XH
F6H
F3H
F4H
F5H
F1H
F2H
Non-data
Security Disable Password
Security Erase Prepare
Security Erase Unit
Security Freeze Lock
Security Set Password
Security Unlock
PIO data-out
Non-data
PIO data-out
Non-data
PIO data-out
PIO data-out
9
© 2009 Apacer Technology Inc.
Rev. 1.1
Compact Flash 4 series
AP-CFxxxxA5XS-XXXXXX
Table 6-1: CFC-ATA command set (2/2)
Command
Code
Command Protocol
Seek
7XH
Non-data
Set-Features
EFH
C6H
Non-data
Non-data
Set-Multiple-mode
Sleep
E6H or 99H Non-data
SMART Disable Operations
B0H
Non-data
SMART Enable/Disable Attribute Autosave B0H
Non-data
SMART Enable Operations
SMART Read Attribute Thresholds
SMART Read Data
SMART Read Log
SMART Return Status
Standby
B0H
B0H
B0H
B0H
B0H
Non-data
PIO data-in
PIO data-in
PIO data-in
Non-data
E2H or 96H Non-data
E0H or 94H Non-data
Standby-Immediate
Write Buffer
E8H
PIO data-out
Write DMA
CAH or CBH DMA
Write Long
32H or 33H
C5H
PIO data-out
Write Multiple
PIO data-out
PIO data
Write Sector(s)
30H or 31H
3CH
Write Verify
PIO data
Write Level
F5H
Non-data
10
© 2009 Apacer Technology Inc.
Rev. 1.1
Compact Flash 4 series
AP-CFxxxxA5XS-XXXXXX
7. Electrical Specification
7.1 Absolute Maximum Ratings
Caution: Absolute Maximum Ratings – Applied conditions greater than those listed under “Absolute
Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and
functional operation of the device at these conditions or conditions greater than those defined in the
operational sections of this data sheet is not implied. Exposure to absolute maximum rating conditions
may affect device reliability.
Table 7-1: Absolute maximum ratings
(Based on GND [0V])
Item
Symbol
VDDIO
Rated Value
-0.5~+4.6
Unit
V
Condition
Power supply voltage
VIN(Standard)
-0.5~+4.6
-0.5~+6.6
(The power is supplied)
V
VIN < VDDIO+0.5V
VIN < VDDIO+3V
Input voltage
VIN(5V-Tolerant)
V
±11
±21
mA 3mA buffer
mA 6mA buffer
mA 9mA buffer
mA 12mA buffer
℃
Output current
IOUT
±29
±45
Storage temperature
TSTG
-40~+100
7.2 Recommended Operating Conditions
Table 7-2: Recommended Operating Conditions
Item
Symbol
VIN(Standard)
VIN(5V-Tolerant)
TA
Rated Value
2.7~3.6
Unit
V
Condition
Input voltage
4.5~5.5
V
Operating ambient temperature
-40~+85
℃
11
© 2009 Apacer Technology Inc.
Rev. 1.1
Compact Flash 4 series
AP-CFxxxxA5XS-XXXXXX
7.3 DC Characteristics
Table 7-3: DC Characteristics (@ VDDIO=3.3V)
Standard Value
Item
Input voltage
Symbol
Unit Measurement Condition
Min
2.0
0
Typ
—
Max
VDDIO
0.7
VIH
VIL
V
V
V
V
V
V
V
(TTL level)
—
VDDIO=2.7V
V+
1.2
0.6
0.3
VDDIO-0.1
—
—
2.4
Schmidt trigger input
(TTL level)
V-
—
1.8
Vh
—
1.5
VOH
VOL
—
—
IOH=0mA
IOL=0mA
Output voltage
—
0.1
IIH
-10
-10
-10
14.2
20.6
—
—
+10
+10
+10
80.7
116.4
—
uA VIN=VDDIO
uA VIN=VSS
uA Hi-Z state
kΩ VIN=VSS
kΩ VIN=VDDIO
Input leak current
IIL
—
Output leak current
Pull-up resistance
Pull-down resistance
IOZ
—
RPU
31.9
44.9
40
20
2
RPD
ICC33udma6
ICC33pio6
ICC33idl
ICC33slp
mA
UDMA mode 6 (when 2ch interleave)
—
—
mA PIO mode 6 (when 2ch interleave)
mA IDLE
Current
consumption
(VDDIO)
—
—
—
0.1
—
mA SLEEP
7.4 Capacitance
Table 7-4: Capacitance
Item
Symbol
Min
7
Typ
—
Max
11
Unit
pF
Input Pin Capacitance (5V-Tolerant)
I/O Pin Capacitance (5V-Tolerant)
Ci (5V-Tolerant)
Cio (5V-Tolerant)
7
—
11
pF
7.5 Integrated Series Termination Resistor
Table 7-5: Integrated Series Termination Resistor
Item
Symbol
Min
Typ
Max
Unit
Terminator Resistance
Rterm
27
33
39
Ω
INTRQ, #INPACK, IORDY, DMACK, #CS0, #CS1, #IORD, #IOWR, A[2:0] and D[15:0] (IDE mode) signals that have integrated
series termination resistors.
12
© 2009 Apacer Technology Inc.
Rev. 1.1
Compact Flash 4 series
AP-CFxxxxA5XS-XXXXXX
7.6 Power Supply Sequence
The controller is an IC that functions at 3.3V for the I/O power supply. There power supplies will deliver
power to the chip externally, but a through current may occur inside the chip depending on the power-on
and power-off sequence. For this reason, the power supply should be turned on and off simultaneously
for reliability. Refer to figure 7-1.
Turn on condition
Time difference of VDDIO*0 to both VDDIO*0.9 is less than 100[ms].
Turn off condition
Time difference of VDDIO*0.9 to both VDDIO*0.1 is less than 100[ms].
5V tolerant buffer
Before/after power supply is turned on/off, it must not apply 5V voltage.
Figure 7-1 Power ON/OFF Sequence
7.7 Setup Time
Hardware reset time (reset release to a ready state) is less than about 100 [ms] in PC Card/HOST
Memory Bus mode. For IDE mode, it is less than about 450 [ms] when master connection, and is less
than about 250 [ms] when slave connection. Setup time does not depend on the total capacity of
connected flash memory.
13
© 2009 Apacer Technology Inc.
Rev. 1.1
Compact Flash 4 series
AP-CFxxxxA5XS-XXXXXX
8. Physical Characteristics
8.1 Dimension
TABLE 8-1: Type I CFC physical specification
36.40 +/- 0.15mm (1.433+/- 0.06 in.)
42.80 +/- 0.10mm (1.685+/- 0.04 in.)
3.3mm+/-0.10mm (0.130+/-0.04in.)
Length:
Width:
Thickness (Including Label Area):
Unit: mm
FIGURE 8-1: Physical dimension
14
© 2009 Apacer Technology Inc.
Rev. 1.1
Compact Flash 4 series
AP-CFxxxxA5XS-XXXXXX
9. Product Ordering Information
9.1 Product Code Designations
A P – CF x x x x A 5 X S – XXXXXX
Specification
RM: Removable
NR: Non-Removable
NDRM: Non-DMA + Removable
NDNR: Non-DMA + Non-Removable
ETRM: Ext. Temp. + Removable
ETNR: Ext. Temp. + Non-Removable
ETNDRM: Ext. Temp + Non-DMA + Removable
ETNDNR: Ext. Temp + Non-DMA + Non-Removable
Halogen Free Compliant
Configuration
F:Dual Channel
G:Dual Channel + Interleave
CTL Type
CFC Type
Capacities:
256M
512M
001G:
002G
004G:
008G
016G
256MB
512MB
1GB
2GB
4GB
8GB
16GB
Model Name
Apacer Product Code
15
© 2009 Apacer Technology Inc.
Rev. 1.1
Compact Flash 4 series
AP-CFxxxxA5XS-XXXXXX
9.2 Valid Combinations
9.2.1 Standard Temperature
9.2.1.1 Removable
Capacity
256MB
512MB
1GB
AP/N
AP-CF256MA5FS-RM
AP-CF512MA5GS-RM
AP-CF001GA5GS-RM
AP-CF002GA5GS-RM
AP-CF004GA5GS-RM
AP-CF008GA5GS-RM
AP-CF016GA5GS-RM
2GB
4GB
8GB
16GB
9.2.1.2 Non-Removable
Capacity
AP/N
256MB
512MB
1GB
AP-CF256MA5FS-NR
AP-CF512MA5GS-NR
AP-CF001GA5GS-NR
AP-CF002GA5GS-NR
AP-CF004GA5GS-NR
AP-CF008GA5GS-NR
AP-CF016GA5GS-NR
2GB
4GB
8GB
16GB
16
© 2009 Apacer Technology Inc.
Rev. 1.1
Compact Flash 4 series
AP-CFxxxxA5XS-XXXXXX
9.2.1.3 Non-DMA + Removable
Capacity
AP/N
256MB
512MB
1GB
AP-CF256MA5FS-NDRM
AP-CF512MA5GS-NDRM
AP-CF001GA5GS-NDRM
AP-CF002GA5GS-NDRM
AP-CF004GA5GS-NDRM
AP-CF008GA5GS-NDRM
AP-CF016GA5GS-NDRM
2GB
4GB
8GB
16GB
9.2.1.4 Non-DMA + Non-Removable
Capacity
256MB
512MB
1GB
AP/N
AP-CF256MA5FS-NDNR
AP-CF512MA5GS-NDNR
AP-CF001GA5GS-NDNR
AP-CF002GA5GS-NDNR
AP-CF004GA5GS-NDNR
AP-CF008GA5GS-NDNR
AP-CF016GA5GS-NDNR
2GB
4GB
8GB
16GB
Note: Valid combinations are those products in mass production or will be in mass production. Consult your Apacer
sales representative to confirm availability of valid combinations and to determine availability of new combinations.
17
© 2009 Apacer Technology Inc.
Rev. 1.1
Compact Flash 4 series
AP-CFxxxxA5XS-XXXXXX
9.2.2 Extended Temperature
9.2.2.1 Ext. Temp. + Removable
Capacity
AP/N
256MB
512MB
1GB
AP-CF256MA5FS-ETRM
AP-CF512MA5GS-ETRM
AP-CF001GA5GS-ETRM
AP-CF002GA5GS-ETRM
AP-CF004GA5GS-ETRM
AP-CF008GA5GS-ETRM
AP-CF016GA5GS-ETRM
2GB
4GB
8GB
16GB
9.2.2.2 Ext. Temp. + Non-Removable
Capacity
256MB
512MB
1GB
AP/N
AP-CF256MA5FS-ETNR
AP-CF512MA5GS-ETNR
AP-CF001GA5GS-ETNR
AP-CF002GA5GS-ETNR
AP-CF004GA5GS-ETNR
AP-CF008GA5GS-ETNR
AP-CF016GA5GS-ETNR
2GB
4GB
8GB
16GB
18
© 2009 Apacer Technology Inc.
Rev. 1.1
Compact Flash 4 series
AP-CFxxxxA5XS-XXXXXX
9.2.2.3 Ext. Temp. + Non-DMA + Removable
Capacity
AP/N
256MB
512MB
1GB
AP-CF256MA5FS-ETNDRM
AP-CF512MA5GS-ETNDRM
AP-CF001GA5GS-ETNDRM
AP-CF002GA5GS-ETNDRM
AP-CF004GA5GS-ETNDRM
AP-CF008GA5GS-ETNDRM
AP-CF016GA5GS-ETNDRM
2GB
4GB
8GB
16GB
9.2.2.4 Ext. Temp. + Non-DMA + Non-Removable
Capacity
256MB
512MB
1GB
AP/N
AP-CF256MA5FS-ETNDNR
AP-CF512MA5GS-ETNDNR
AP-CF001GA5GS-ETNDNR
AP-CF002GA5GS-ETNDNR
AP-CF004GA5GS-ETNDNR
AP-CF008GA5GS-ETNDNR
AP-CF016GA5GS-ETNDNR
2GB
4GB
8GB
16GB
Note: Valid combinations are those products in mass production or will be in mass production. Consult your Apacer
sales representative to confirm availability of valid combinations and to determine availability of new combinations.
19
© 2009 Apacer Technology Inc.
Rev. 1.1
Compact Flash 4 series
AP-CFxxxxA5XS-XXXXXX
Revision History
Revision
0.1
Date
Description
Remark
07/31/2009
08/06/2009
08/10/2009
08/11/2009
10/21/2009
11/17/2009
Preliminary
0.2
Context revised
Modified pin assignments
Context revised
Official release
0.3
0.4
1.0
1.1
Command set revised
20
© 2009 Apacer Technology Inc.
Rev. 1.1
Compact Flash 4 series
AP-CFxxxxA5XS-XXXXXX
Global Presence
Apacer Technology Inc.
4th Fl., 75 Hsin Tai Wu Rd., Sec.1
Hsichih, 221 Taipei Hsien
Taiwan, R.O.C.
Taiwan (Headquarters)
Tel: +886-2-2698-2888
Fax: +886-2-2698-2889
amtsales@apacer.com
Apacer Memory America, Inc.
386 Fairview Way, Suite102,
Milpitas, CA 95035
Tel: 1-408-518-8699
Fax: 1-408-935-9611
U.S.A.
Japan
Europe
sa@apacerus.com
Apacer Technology Corp.
5F, Matsura Bldg., Shiba, Minato-Ku
Tokyo, 105-0014, Japan
Tel: 81-3-5419-2668
Fax: 81-3-5419-0018
jpservices@apacer.com
Apacer Technology B.V.
Europalaan 89
5232 BC 'S-Hertogenbosch
The Netherlands
Tel: 31-73-645-9620
Fax: 31-73-645-9629
sales@apacer.nl
Apacer Electronic (Shanghai) Co., Ltd
1301, No.251,Xiaomuqiao Road, Shanghai,
200032, China
Tel: 86-21-5529-0222
Fax: 86-21-5206-6939
China
India
sales@apacer.com.cn
Apacer Technologies Pvt. Ltd.
#143, 1st Floor, Raheja Arcade,
5th Block Kormangala Industrial Layout,
Bangalore - 560095, India
Tel: 91-80-4152-9061
sales_india@apacer.com
21
© 2009 Apacer Technology Inc.
Rev. 1.1
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Apacer:
AP-CF004GA5GS-ETNDRM AP-CF004GA5GS-ETRM AP-CF004GA5GS-NDRM AP-CF004GA5GS-RM
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明