BLED25W-062-C0400 [ETC]

Budget Series Switch Mode LED Drivers;
BLED25W-062-C0400
型号: BLED25W-062-C0400
厂家: ETC    ETC
描述:

Budget Series Switch Mode LED Drivers

文件: 总2页 (文件大小:710K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
BLED-25W Series  
Budget Series Switch Mode LED Drivers  
Constant Current with Isolation  
Black Magic Thermal Advantage™ Plastic Housing  
Electrical Specifications  
Input Voltage Range:  
100-277 Vac Nom. (90-305 V Min/Max)  
Frequency:  
50/60 Hz Nom. (47-63 Hz Min/Max)  
Power Factor:  
Inrush Current:  
Input Current:  
Maximum Power:  
Line Regulation:  
Load Regulation:  
THD:  
>0.90 @ full load, 120V; >0.80 @ full load, 277V  
<25 A max @ 230 Vac, cold start 25ºC  
0.27 A max @ 120 Vac; 0.14 A max @ 230 Vac  
25W  
± 4%  
± 5%  
<_ 20% @ full load  
Leakage Current:  
Hold Up Time:  
Start-up Time:  
Output Protection:  
300 µA Typical  
Half Cycle  
< 1.0 S  
• Smaller footprint than our standard drivers  
Total Power: 25 Watts  
Over-Voltage, Over-Current, Short Circuit (auto-recovery)  
• Input Voltage: 100-277 Vac  
• Indoor Applications, IP64  
• UL Dry or Damp Location Rated  
• 2 year Warranty  
Environmental Specifications  
Minimum Starting Temp: -30ºC  
Storage Temperature:  
Maximum Case Temp.  
Humidity:  
-40ºC to +85ºC  
90°C  
5% to 95%  
Cooling:  
Convection  
Sound Rating:  
Vibration Frequency:  
MTBF:  
Class A  
5 to 55 Hz/2g, 30 minutes  
580,000 Hours @ full load, 40ºC per MIL-217F Notice 2  
Impact Resistance:  
Weight:  
1g/s  
4.5 oz (128 g)  
Constant Current - Product Specifications  
Output Current Output Voltage Max. Output Typical  
Model Number  
(mA ±5%)  
Range (Vdc)  
120-200  
90-150  
60-100  
43-72  
Power (W) Efficiency  
BLED25W-200-C0120  
BLED25W-150-C0160  
BLED25W-100-C0250  
BLED25W-072-C0350  
BLED25W-062-C0400  
BLED25W-056-C0450  
BLED25W-048-C0520  
BLED25W-043-C0580  
BLED25W-036-C0700  
BLED25W-028-C0850  
BLED25W-024-C1040  
BLED25W-020-C1250  
BLED25W-012-C2100  
120  
25  
25  
25  
25  
25  
25  
25  
25  
25  
25  
25  
25  
25  
89  
89  
89  
88  
88  
88  
87  
87  
86  
86  
85  
84  
83  
160  
250  
350  
400  
37-62  
450  
34-56  
520  
29-48  
580  
26-43  
700  
21-36  
850  
17-28  
1040  
1250  
2100  
14-24  
13-20  
7-12  
Class 2:  
US/Canada  
US Only  
E332160  
Note:  
LED drivers are designed and intended to operate LED loads only.  
Non-LED loading may be outside the specified design limits of our  
LED drivers, and therefore cannot be covered by any warranty.  
If you desire to use our LED drivers to operate non-LED loads  
please contact us to discuss compatibility.  
Specifications subject to change without notice.  
Rev 8-12-15  
Thomas Research Products • 1215 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com  
BLED25W Series  
SSL Solutions Faster Than The Speed Of Light®  
Pg 2 of 2  
Dimensions - Inches (mm)  
[
]
3.44 87.5  
[
]
0.14 3.5  
[
]
5.91 Min 150 Min  
WIRE SPECS:  
Input Leads: 18 AWG, rated 600 V, 105C, min.  
Output Leads: 18 AWG, rated 300 V, 105C, min.  
All wires are stranded with solder dipped ends.  
HOT SPOT  
[
]
0.39±0.04 10.0±1  
DC Output  
Red (+)  
Blue (-)  
[
]
5.91 Min 150 Min  
[
]
1.67 42.5  
AC Input  
White (N)  
Black (L)  
[
]
1.44 36.5  
Power Factor / Load  
THD / Load  
1.00  
22%  
20%  
18%  
16%  
14%  
12%  
10%  
8%  
0.90  
0.80  
0.70  
0.60  
0.50  
0.40  
0.30  
0.20  
0.10  
0.00  
120Vac  
277Vac  
120Vac  
277Vac  
6%  
4%  
2%  
0%  
60%  
60%  
70%  
80%  
90%  
100%  
70%  
80%  
90%  
100%  
Load  
Load  
Lifetime / Case Temperature  
Typical Efficiency / Load  
135  
120  
105  
90  
75  
60  
45  
30  
15  
0
100%  
95%  
90%  
85%  
80%  
75%  
70%  
120Vac  
277Vac  
60%  
70%  
80%  
90%  
100%  
Normalized Output Voltage  
40 45 50 55 60 65 70 75 80 85 90  
Case Hotspot Temperature (°C)  
Note:  
Life calculations are based on reliability with confidence using  
a 90% confidence level and <5% failure rate. At a confidence  
level of 90% it is expected that <5% of the parts will fail at  
the rated life provided. (Failure is defined as a driver drifting  
outside specification, rather than fail to operate)  
Safety and EMC Compliance  
UL/CUL  
C E  
UL8750, CSA-C22.2  
EN61347  
FCC, 47CFR Part 15 Class B  
EN61000-3-2  
EN61000-3-3  
Class C  
UL Conditions of Acceptability  
See website for additional information  
Note:  
Disconnect power to LED driver for at least 30 seconds before connecting or disconnecting Driver output and LED Engine. This prevents potential arcing transients  
that can damage the Engine and Driver. See Hot Plugging in our Driver Application Guide for more information.  
Thomas Research Products • 1215 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com  

相关型号:

BLED25W-072-C0350

Budget Series Switch Mode LED Drivers
ETC

BLED25W-100-C0250

Budget Series Switch Mode LED Drivers
ETC

BLED25W-150-C0160

Budget Series Switch Mode LED Drivers
ETC

BLED25W-200-C0120

Budget Series Switch Mode LED Drivers
ETC

BLED35W-012-C3000

Budget Series Switch Mode LED Drivers
ETC

BLED35W-018-C2000

Budget Series Switch Mode LED Drivers
ETC

BLED35W-022-C1600

Budget Series Switch Mode LED Drivers
ETC

BLED35W-024-C1500

Budget Series Switch Mode LED Drivers
ETC

BLED35W-030-C1200

Budget Series Switch Mode LED Drivers
ETC

BLED35W-036-C1000

Budget Series Switch Mode LED Drivers
ETC

BLED35W-043-C0810

Budget Series Switch Mode LED Drivers
ETC

BLED35W-048-C0700

Budget Series Switch Mode LED Drivers
ETC