BLED40W-036-C1100 [ETC]

Budget Series Switch Mode LED Drivers;


型号：	BLED40W-036-C1100
厂家：	ETC
描述：	Budget Series Switch Mode LED Drivers
文件：	总2页 (文件大小：569K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

BLED-40W Series

Budget Series Switch Mode LED Drivers

Constant Current with Isolation

Black Magic Thermal Advantage™ Plastic Housing

Electrical Speciﬁcations

Input Voltage Range:

100-277 Vac Nom. (90-305 V Min/Max)

Frequency:

50/60 Hz Nom. (47-63 Hz Min/Max)

Power Factor:

Inrush Current:

Input Current:

Maximum Power:

Line Regulation:

Load Regulation:

THD:

>0.90 @ full load, 120V; >0.80 @ full load, 277V

<25 A max @ 230 Vac, cold start 25ºC

0.41 A max @ 120 Vac; 0.20 A max @ 230 Vac

40W

± 4%

± 5%

<_ 20% @ full load

Leakage Current:

Hold Up Time:

Start-up Time:

Output Protection:

300 µA Typical

Half Cycle

< 1.0 S

• Smaller footprint than our standard drivers

• Total Power: 40 Watts

Over-Voltage, Over-Current, Short Circuit (auto-recovery)

• Input Voltage: 100-277 Vac

• Indoor Applications, IP64

• UL Dry or Damp Location Rated

• 2 year Warranty

Environmental Speciﬁcations

Minimum Starting Temp: -30ºC

Storage Temperature:

Maximum Case Temp.

Humidity:

-40ºC to +85ºC

90°C

5% to 95%

Cooling:

Convection

Sound Rating:

Vibration Frequency:

MTBF:

Class A

5 to 55 Hz/2g, 30 minutes

580,000 Hours @ full load, 40ºC per MIL-217F Notice 2

Impact Resistance:

Weight:

1g/s

7.0 oz (198 g)

Constant Current - Product Speciﬁcations

Output Current Output Voltage Max. Output Typical

Model Number

(mA ±5%)

Range (Vdc)

120-200

68-114

60-100

43-72

Power (W) Efﬁciency

BLED40W-200-C0200

BLED40W-114-C0350

BLED40W-100-C0400

BLED40W-072-C0550

BLED40W-054-C0700

BLED40W-048-C0830

BLED40W-043-C0930

BLED40W-036-C1100

BLED40W-028-C1400

BLED40W-024-C1670

BLED40W-012-C3340

200

350

400

550

700

32-54

37.8

830

29-48

930

26-43

1100

1400

1670

3340

21-36

17-28

14-24

7-12

Class 2:

US/Canada

US Only

E332160

Note:

LED drivers are designed and intended to operate LED loads only.

Non-LED loading may be outside the speciﬁed design limits of our

LED drivers, and therefore cannot be covered by any warranty.

If you desire to use our LED drivers to operate non-LED loads

please contact us to discuss compatibility.

Speciﬁcations subject to change without notice.

Rev 8-12-15

Thomas Research Products • 1215 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com

BLED40W Series

SSL Solutions Faster Than The Speed Of Light^®

Pg 2 of 2

Dimensions - Inches (mm)

[

]

3.07 78

[

2.75 70

[

]

0.99 25.2

[

]

1.2 31

[

]

5.91 Min 150 Min

[

]

0.39±0.04 10.0±1

HOT SPOT

DC Output

Red (+)

Blue (-)

[

]

0.39±0.04 10.0±1

AC Input

White (N)

Black (L)

[

]

5.91 Min 150 Min

[

]

2.38 60.5

WIRE SPECS:

Input Leads: 18 AWG, rated 600 V, 105C, min.

Output Leads: 18 AWG, rated 300 V, 105C, min.

All wires are stranded with solder dipped ends.

[

]

2.44 62

Lifetime / Case Temperature

Safety and EMC Compliance

135

120

105

UL/CUL

C E

UL8750, CSA-C22.2

EN61347

FCC, 47CFR Part 15 Class B

EN61000-3-2

EN61000-3-3

Class C

UL Conditions of Acceptability

40 45 50 55 60 65 70 75 80 85 90

See website for additional information

Case Hotspot Temperature (°C)

Note:

Life calculations are based on reliability with conﬁdence using

a 90% conﬁdence level and <5% failure rate. At a conﬁdence

level of 90% it is expected that <5% of the parts will fail at

the rated life provided. (Failure is deﬁned as a driver drifting

outside speciﬁcation, rather than fail to operate)

Note:

Disconnect power to LED driver for at least 30 seconds before connecting or disconnecting Driver output and LED Engine. This prevents potential arcing transients

that can damage the Engine and Driver. See Hot Plugging in our Driver Application Guide for more information.

Thomas Research Products • 1215 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com

相关型号：