首页 |元器件品牌

BLF6G15LS-250PBRN: [ETC]

RF FET 65V 18.5DB SOT1110B;
BLF6G15LS-250PBRN:
型号： BLF6G15LS-250PBRN:
厂家： ETC    ETC
描述：

RF FET 65V 18.5DB SOT1110B
文件： 总12页 (文件大小：970K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
BLF6G15LS-250PBRN  
Power LDMOS transistor  
Rev. 3 — 1 September 2015  
Product data sheet  
1. Product profile  
1.1 General description  
250 W LDMOS power transistor for base station applications at frequencies from  
1450 MHz to 1550 MHz.  
Table 1.  
Typical performance  
Typical RF performance at Tcase = 25 C in a class-AB production test circuit.  
Mode of operation  
f
VDS  
(V)  
28  
PL(AV)  
(W)  
Gp  
D  
ACPR  
(dBc)  
30 [1]  
(MHz)  
(dB)  
18.5  
(%)  
34.0  
2-carrier W-CDMA  
1476 to 1511  
60  
[1] Test signal: 3GPP test model 1; 64 DPCH; PAR = 7.5 dB at 0.01 % probability on CCDF per carrier.  
Carrier spacing 5 MHz.  
1.2 Features and benefits  
Typical 2-carrier W-CDMA performance at frequencies of 1476 MHz and 1511 MHz, a  
supply voltage of 28 V and an IDq of 1410 mA:  
Average output power = 60 W  
Power gain = 18.5 dB  
Efficiency = 34.0 %  
ACPR = 30 dBc  
Easy power control  
Integrated ESD protection  
Enhanced ruggedness  
High efficiency  
Excellent thermal stability  
Designed for broadband operation (1450 MHz to 1550 MHz)  
Internally matched for ease of use  
Compliant to Restriction of Hazardous Substances (RoHS) Directive 2002/95/EC  
Integrated current sense  
1.3 Applications  
RF power amplifiers for GSM, GSM EDGE, CDMA and W-CDMA and multi carrier  
applications in the 1450 MHz to 1550 MHz frequency range  
BLF6G15LS-250PBRN  
Power LDMOS transistor  
2. Pinning information  
Table 2.  
Pinning  
Pin  
1
Description  
drain1  
Simplified outline  
Graphic symbol  
1
2
1
6, 7  
6
7
5
9
2
drain2  
3
gate1  
3
4
8, 9  
4
gate2  
8
3
4
[1]  
5
5
source  
6, 7  
8, 9  
sense drain  
sense gate  
2
sym127  
[1] Connected to flange.  
3. Ordering information  
Table 3.  
Ordering information  
Type number  
Package  
Name Description  
Version  
BLF6G15LS-250PBRN -  
earless flanged LDMOST ceramic package; 8 leads SOT1110B  
4. Limiting values  
Table 4.  
Limiting values  
In accordance with the Absolute Maximum Rating System (IEC 60134).  
Symbol  
VDS  
VGS  
ID  
Parameter  
Conditions  
Min  
Max  
Unit  
V
drain-source voltage  
gate-source voltage  
drain current  
-
65  
0.5 +11  
V
-
64  
A
Tstg  
storage temperature  
junction temperature  
case temperature  
65  
+150 C  
Tj  
-
-
200  
150  
C  
C  
[1]  
Tcase  
[1] Continuous use at maximum temperature will affect MTTF.  
5. Recommended operating conditions  
Table 5.  
Symbol  
Tcase  
Operating conditions  
Parameter  
case temperature  
Conditions  
Min  
40  
Max  
+125  
Unit  
C  
BLF6G15LS-250PBRN#3  
All information provided in this document is subject to legal disclaimers.  
© Ampleon The Netherlands B.V. 2015. All rights reserved.  
Product data sheet  
Rev. 3 — 1 September 2015  
2 of 12  
BLF6G15LS-250PBRN  
Power LDMOS transistor  
6. Thermal characteristics  
Table 6.  
Thermal characteristics  
Symbol Parameter  
Conditions  
Typ Unit  
Rth(j-case) thermal resistance from junction to case Tcase = 80 C; PL = 60 W (CW)  
0.29 K/W  
7. Characteristics  
Table 7.  
Characteristics  
Tj = 25 C per section; unless otherwise specified  
Symbol Parameter  
Conditions  
Min Typ Max Unit  
V(BR)DSS drain-source breakdown voltage VGS = 0 V; ID = 1.8 mA  
65  
75  
-
V
V
VGS(th)  
IDq  
gate-source threshold voltage  
quiescent drain current  
VDS = 10 V; ID = 180 mA  
sense transistor:  
1.4 1.8 2.4  
1.31 1.41 1.51 A  
IDS= 20.1 mA;  
VDS = 12 V  
main transistor:  
VDS = 28 V  
IDSS  
IDSX  
drain leakage current  
drain cut-off current  
VGS = 0 V; VDS = 28 V  
-
-
2.8 A  
VGS = VGS(th) + 3.75 V;  
VDS = 10 V  
25.3 29  
-
A
IGSS  
gfs  
gate leakage current  
VGS = 11 V; VDS = 0 V  
VDS = 10 V; ID = 9 A  
-
-
280 nA  
forward transconductance  
8.1 12.3 -  
S
RDS(on)  
drain-source on-state resistance VGS = VGS(th) + 3.75 V;  
ID = 6.3 A  
0.03 0.1 0.16  
8. Application information  
Table 8.  
RF performance  
Mode of operation: 2-carrier W-CDMA; PAR 7.5 dB at 0.01 % probability on CCDF;  
3GPP test model 1; 64 DPCH; f1 = 1473.4 MHz; f2 = 1478.4 MHz; f3 = 1508.4 MHz;  
f4 = 1513.4 MHz; RF performance at VDS = 28 V; IDq = 1410 mA; Tcase = 25 C; unless otherwise  
specified in a class-AB production test circuit.  
Symbol Parameter  
Conditions  
Min Typ  
60  
16.5 18.5  
Max  
Unit  
W
PL(AV)  
Gp  
average output power  
-
-
power gain  
PL(AV) = 60 W  
PL(AV) = 60 W  
PL(AV) = 60 W  
PL(AV) = 60 W  
-
dB  
dB  
%
RLin  
D  
input return loss  
-
11  
34  
7  
-
drain efficiency  
31  
-
ACPR  
adjacent channel power ratio  
30  
27  
dBc  
BLF6G15LS-250PBRN#3  
All information provided in this document is subject to legal disclaimers.  
© Ampleon The Netherlands B.V. 2015. All rights reserved.  
Product data sheet  
Rev. 3 — 1 September 2015  
3 of 12  
BLF6G15LS-250PBRN  
Power LDMOS transistor  
Table 9.  
PAR performance  
Mode of operation; 1-carrier W-CDMA; PAR 7.5 dB at 0.01 % probability on CCDF;  
3GPP test model 1; 64 DPCH; f1 = 1510.9 MHz; RF performance at VDS = 28 V; IDq = 1410 mA;  
Tcase = 25 C; unless otherwise specified in a class-AB production test circuit.  
Symbol Parameter  
PARO output peak-to-average  
ratio  
Conditions  
Min  
Typ  
Max  
Unit  
PL(AV) = 120 W at 0.01 %  
probability on CCDF  
3.4  
4.2  
-
dB  
8.1 Ruggedness in class-AB operation  
The BLF6G15LS-250PBRN is capable of withstanding a load mismatch corresponding to  
VSWR = 10 : 1 through all phases under the following conditions: VDS = 28 V;  
IDq = 1410 mA; PL = 200 W; f = 1475 MHz.  
8.2 Impedance information  
Table 10. Typical impedance per section  
IDq = 950 mA; main transistor VDS = 28 V  
[1]  
[1]  
f
ZS  
ZL  
(MHz)  
1480  
1510  
()  
()  
1.1 j2.8  
1.3 j2.8  
2.3 j3.2  
2.1 j2.8  
[1] ZS and ZL defined in Figure 1.  
drain  
Z
L
gate  
Z
S
001aaf059  
Fig 1. Definition of transistor impedance  
BLF6G15LS-250PBRN#3  
All information provided in this document is subject to legal disclaimers.  
© Ampleon The Netherlands B.V. 2015. All rights reserved.  
Product data sheet  
Rev. 3 — 1 September 2015  
4 of 12  
BLF6G15LS-250PBRN  
Power LDMOS transistor  
8.3 Graphs  
8.3.1 CW  
014aab101  
21  
60  
(2)  
η
G
(dB)  
D
(%)  
p
η
D
(3)  
50  
20  
(1)  
19  
18  
17  
16  
40  
G
p
(1)  
(2)  
(3)  
30  
20  
10  
0
50  
100  
150  
200  
250  
(W)  
P
L
(1) f = 1475 MHz  
(2) f = 1493 MHz  
(3) f = 1511 MHz  
Fig 2. Power gain and drain efficiency as function of output power; typical values  
BLF6G15LS-250PBRN#3  
All information provided in this document is subject to legal disclaimers.  
© Ampleon The Netherlands B.V. 2015. All rights reserved.  
Product data sheet  
Rev. 3 — 1 September 2015  
5 of 12  
BLF6G15LS-250PBRN  
Power LDMOS transistor  
8.3.2 IS-95  
014aab099  
014aab100  
20  
50  
40  
30  
20  
10  
−25  
11  
PAR  
(2)  
(3)  
(1)  
ACPR  
(dBc)  
ACPR  
η
885k  
D
(%)  
G
p
(dB)  
(1)  
(3)  
−35  
9
7
5
3
1
G
p
19  
(2)  
(2)  
(1)  
ACPR  
(3)  
1980k  
−45  
−55  
−65  
−75  
(1)  
(2)  
18  
17  
16  
(3)  
η
D
(2)  
(3)  
(1)  
PAR  
0
40  
80  
120  
160  
0
40  
80  
120  
160  
P
(W)  
P (W)  
L
L
IS-95: PAR = 9.8 dB at 0.01 % probability of the CCDF.  
IS-95: PAR = 9.8 dB at 0.01 % probability of the CCDF.  
(1) f = 1475 MHz  
(2) f = 1493 MHz  
(3) f = 1511 MHz  
(1) f = 1475 MHz  
(2) f = 1493 MHz  
(3) f = 1511 MHz  
Fig 3. Power gain and drain efficiency as function of  
output power; typical values  
Fig 4. Adjacent channel power ratio and  
peak-to-average power ratio as function of  
output power; typical values  
8.3.3 2-Carrier W-CDMA (5 MHz spacing)  
RF performance sweep with 2-carrier W-CDMA is unavailable for the  
BLF6G15LS-250PBRN. The typical 2-carrier W-CDMA sweep of the  
BLF6G15L-250PBRN can be found in its data sheet.  
9. Test information  
Table 11. List of components  
See Figure 5 for component layout.  
Component  
C1, C2, C3, C4  
C5, C6  
Description  
Value  
100 pF  
10 F  
10 nF  
Remarks  
[1]  
[2]  
[2]  
multi layer ceramic chip capacitor  
multi layer ceramic chip capacitor  
multi layer ceramic chip capacitor  
C7  
on input gate  
line as shown  
[2]  
[1]  
[3]  
C8  
multi layer ceramic chip capacitor  
multi layer ceramic chip capacitor  
multi layer ceramic chip capacitor  
electrolytic capacitor  
100 nF  
2.4 pF  
C10  
C11  
3.6 pF  
C12  
470 F; 63 V  
33 pF  
[3]  
C13, C14, C15, C16  
R1  
multi layer ceramic chip capacitor  
chip resistor  
3.9 k  
Philips 0603  
BLF6G15LS-250PBRN#3  
All information provided in this document is subject to legal disclaimers.  
© Ampleon The Netherlands B.V. 2015. All rights reserved.  
Product data sheet  
Rev. 3 — 1 September 2015  
6 of 12  
BLF6G15LS-250PBRN  
Power LDMOS transistor  
Table 11. List of components …continued  
See Figure 5 for component layout.  
Component  
Description  
chip resistor  
chip resistor  
chip resistor  
Value  
2.2 k  
10   
0   
Remarks  
R2  
R3  
R4  
Philips 0603  
Philips 0603  
Philips 0603  
[1] American Technical Ceramics type 800B or capacitor of same quality.  
[2] TDK or capacitor of same quality.  
[3] American Technical Ceramics type 100B or capacitor of same quality.  
R2  
C7  
−
+
C12  
R4  
R1  
C1  
C5  
R3  
C8  
C3  
C15  
C13  
C10  
C11  
BLF6G15L-250BPRN  
Output Rev 03  
C14  
C6  
C16  
BLF6G15L-250BPRN  
input Rev 03  
C4  
C2  
014aab104  
Printed-Circuit Board (PCB): Taconic RF-35A2; r = 3.5 F/m; thickness = 0.762 mm; thickness copper plating = 35 m.  
The vias can be as a reference to place components.  
The above layout shows the test circuit used to measure the devices in production. A more appropriate application  
demonstration for specific customer needs can be provided.  
See Table 11 for list of components.  
Fig 5. Component layout  
BLF6G15LS-250PBRN#3  
All information provided in this document is subject to legal disclaimers.  
© Ampleon The Netherlands B.V. 2015. All rights reserved.  
Product data sheet  
Rev. 3 — 1 September 2015  
7 of 12  
BLF6G15LS-250PBRN  
Power LDMOS transistor  
10. Package outline  
Earless flanged LDMOST ceramic package; 8 leads  
SOT1110B  
D
A
F
5
L
D
D
1
U
H
1
1
c
w
D
2
1
2
7
6
y
α
U
H
Z
Z
1
Z
2
E
1
E
2
8
9
3
4
b
b
1
w
Q
3
e
Z
Z
1
Z
2
α
4.60 11.71 15.52 64°  
4.32 10.64 14.50 62°  
0.181 0.461 0.611 64°  
0
5
10 mm  
scale  
0.170 0.419 0.571 62°  
Dimensions  
(1)  
(2)  
Unit  
A
b
b
c
D
D
1
e
E
E
1
F
H
H
1
L
Q
U
U
w
w
3
y
1
1
2
2
max 5.5  
mm nom  
min 4.2  
max 0.217 0.072 0.465 0.007 1.242 1.241  
inches nom  
min 0.165 0.062 0.455 0.004 1.218 1.219  
1.83 11.81 0.18 31.55 31.52  
9.5  
9.53 1.75 17.12 25.53 3.35 2.26 32.39 10.29  
0.15  
13.72  
0.54  
0.51 0.25  
0.02 0.01  
1.57 11.56 0.10 30.94 30.96  
9.3  
9.27 1.50 16.10 25.27 3.10 2.01 32.13 10.03  
0.374 0.375 0.069 0.674 1.005 0.132 0.089 1.275 0.405  
0.366 0.365 0.059 0.634 0.995 0.122 0.079 1.265 0.395  
0.0059  
Note  
1. millimeter dimensions are derived from the original inch dimensions.  
2. dimension is measured 0.030 inch (0.76 mm) from the body.  
sot1110b_po  
References  
Outline  
version  
European  
projection  
Issue date  
IEC  
JEDEC  
JEITA  
12-04-11  
12-06-14  
SOT1110B  
Fig 6. Package outline SOT1110B  
BLF6G15LS-250PBRN#3  
All information provided in this document is subject to legal disclaimers.  
© Ampleon The Netherlands B.V. 2015. All rights reserved.  
Product data sheet  
Rev. 3 — 1 September 2015  
8 of 12  
BLF6G15LS-250PBRN  
Power LDMOS transistor  
11. Abbreviations  
Table 12. Abbreviations  
Acronym  
CCDF  
CDMA  
CW  
Description  
Complementary Cumulative Distribution Function  
Code Division Multiple Access  
Continuous Wave  
DPCH  
EDGE  
ESD  
Dedicated Physical CHannel  
Enhanced Data rates for GSM Evolution  
ElectroStatic Discharge  
GSM  
Global System for Mobile communications  
Interim Standard 95  
IS-95  
LDMOS  
LDMOST  
MTTF  
PAR  
Laterally Diffused Metal-Oxide Semiconductor  
Laterally Diffused Metal-Oxide Semiconductor Transistor  
Mean Time To Failure  
Peak-to-Average Ratio  
VSWR  
W-CDMA  
Voltage Standing-Wave Ratio  
Wideband Code Division Multiple Access  
12. Revision history  
Table 13. Revision history  
Document ID  
Release date  
20150901  
Data sheet status  
Change notice Supersedes  
- BLF6G15LS-250PBRN v.2  
BLF6G15LS-250PBRN#3  
Modifications:  
Product data sheet  
• The format of this document has been redesigned to comply with the new identity  
guidelines of Ampleon.  
• Legal texts have been adapted to the new company name where appropriate.  
BLF6G15LS-250PBRN v.2  
BLF6G15LS-250PBRN v.1  
20120718  
Product data sheet  
-
BLF6G15LS-250PBRN v.1  
20120611  
Product data sheet  
-
-
BLF6G15LS-250PBRN#3  
All information provided in this document is subject to legal disclaimers.  
© Ampleon The Netherlands B.V. 2015. All rights reserved.  
Product data sheet  
Rev. 3 — 1 September 2015  
9 of 12  
BLF6G15LS-250PBRN  
Power LDMOS transistor  
13. Legal information  
13.1 Data sheet status  
Document status[1][2]  
Product status[3]  
Development  
Definition  
Objective [short] data sheet  
This document contains data from the objective specification for product development.  
This document contains data from the preliminary specification.  
This document contains the product specification.  
Preliminary [short] data sheet Qualification  
Product [short] data sheet Production  
[1]  
[2]  
[3]  
Please consult the most recently issued document before initiating or completing a design.  
The term ‘short data sheet’ is explained in section “Definitions”.  
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status  
information is available on the Internet at URL http://www.ampleon.com.  
Ampleon product can reasonably be expected to result in personal injury,  
13.2 Definitions  
death or severe property or environmental damage. Ampleon and its  
suppliers accept no liability for inclusion and/or use of Ampleon products in  
such equipment or applications and therefore such inclusion and/or use is at  
the customer’s own risk.  
Draft — The document is a draft version only. The content is still under  
internal review and subject to formal approval, which may result in  
modifications or additions. Ampleon does not give any representations or  
warranties as to the accuracy or completeness of information included herein  
and shall have no liability for the consequences of use of such information.  
Applications — Applications that are described herein for any of these  
products are for illustrative purposes only. Ampleon makes no representation  
or warranty that such applications will be suitable for the specified use without  
further testing or modification.  
Short data sheet — A short data sheet is an extract from a full data sheet  
with the same product type number(s) and title. A short data sheet is intended  
for quick reference only and should not be relied upon to contain detailed and  
full information. For detailed and full information see the relevant full data  
sheet, which is available on request via the local Ampleon sales office. In  
case of any inconsistency or conflict with the short data sheet, the full data  
sheet shall prevail.  
Customers are responsible for the design and operation of their applications  
and products using Ampleon products, and Ampleon accepts no liability for  
any assistance with applications or customer product design. It is customer’s  
sole responsibility to determine whether the Ampleon product is suitable and  
fit for the customer’s applications and products planned, as well as for the  
planned application and use of customer’s third party customer(s). Customers  
should provide appropriate design and operating safeguards to minimize the  
risks associated with their applications and products.  
Product specification — The information and data provided in a Product  
data sheet shall define the specification of the product as agreed between  
Ampleon and its customer, unless Ampleon and customer have explicitly  
agreed otherwise in writing. In no event however, shall an agreement be valid  
in which the Ampleon product is deemed to offer functions and qualities  
beyond those described in the Product data sheet.  
Ampleon does not accept any liability related to any default, damage, costs or  
problem which is based on any weakness or default in the customer’s  
applications or products, or the application or use by customer’s third party  
customer(s). Customer is responsible for doing all necessary testing for the  
customer’s applications and products using Ampleon products in order to  
avoid a default of the applications and the products or of the application or  
use by customer’s third party customer(s). Ampleon does not accept any  
liability in this respect.  
13.3 Disclaimers  
Limited warranty and liability — Information in this document is believed to  
be accurate and reliable. However, Ampleon does not give any  
representations or warranties, expressed or implied, as to the accuracy or  
completeness of such information and shall have no liability for the  
consequences of use of such information. Ampleon takes no responsibility for  
the content in this document if provided by an information source outside of  
Ampleon.  
Limiting values — Stress above one or more limiting values (as defined in  
the Absolute Maximum Ratings System of IEC 60134) will cause permanent  
damage to the device. Limiting values are stress ratings only and (proper)  
operation of the device at these or any other conditions above those given in  
the Recommended operating conditions section (if present) or the  
Characteristics sections of this document is not warranted. Constant or  
repeated exposure to limiting values will permanently and irreversibly affect  
the quality and reliability of the device.  
In no event shall Ampleon be liable for any indirect, incidental, punitive,  
special or consequential damages (including - without limitation - lost profits,  
lost savings, business interruption, costs related to the removal or  
replacement of any products or rework charges) whether or not such  
damages are based on tort (including negligence), warranty, breach of  
contract or any other legal theory.  
Terms and conditions of commercial sale — Ampleon products are sold  
subject to the general terms and conditions of commercial sale, as published  
at http://www.ampleon.com/terms, unless otherwise agreed in a valid written  
individual agreement. In case an individual agreement is concluded only the  
terms and conditions of the respective agreement shall apply. Ampleon  
hereby expressly objects to applying the customer’s general terms and  
conditions with regard to the purchase of Ampleon products by customer.  
Notwithstanding any damages that customer might incur for any reason  
whatsoever, Ampleon’ aggregate and cumulative liability towards customer  
for the products described herein shall be limited in accordance with the  
Terms and conditions of commercial sale of Ampleon.  
No offer to sell or license — Nothing in this document may be interpreted or  
construed as an offer to sell products that is open for acceptance or the grant,  
conveyance or implication of any license under any copyrights, patents or  
other industrial or intellectual property rights.  
Right to make changes — Ampleon reserves the right to make changes to  
information published in this document, including without limitation  
specifications and product descriptions, at any time and without notice. This  
document supersedes and replaces all information supplied prior to the  
publication hereof.  
Export control — This document as well as the item(s) described herein  
may be subject to export control regulations. Export might require a prior  
authorization from competent authorities.  
Suitability for use — Ampleon products are not designed, authorized or  
warranted to be suitable for use in life support, life-critical or safety-critical  
systems or equipment, nor in applications where failure or malfunction of an  
BLF6G15LS-250PBRN#3  
All information provided in this document is subject to legal disclaimers.  
© Ampleon The Netherlands B.V. 2015. All rights reserved.  
Product data sheet  
Rev. 3 — 1 September 2015  
10 of 12  
BLF6G15LS-250PBRN  
Power LDMOS transistor  
Non-automotive qualified products — Unless this data sheet expressly  
states that this specific Ampleon product is automotive qualified, the product  
is not suitable for automotive use. It is neither qualified nor tested in  
accordance with automotive testing or application requirements. Ampleon  
accepts no liability for inclusion and/or use of non-automotive qualified  
products in automotive equipment or applications.  
13.4 Trademarks  
Notice: All referenced brands, product names, service names and trademarks  
are the property of their respective owners.  
Any reference or use of any ‘NXP’ trademark in this document or in or on the  
surface of Ampleon products does not result in any claim, liability or  
entitlement vis-à-vis the owner of this trademark. Ampleon is no longer part of  
the NXP group of companies and any reference to or use of the ‘NXP’  
trademarks will be replaced by reference to or use of Ampleon’s own Any  
reference or use of any ‘NXP’ trademark in this document or in or on the  
surface of Ampleon products does not result in any claim, liability or  
entitlement vis-à-vis the owner of this trademark. Ampleon is no longer part of  
the NXP group of companies and any reference to or use of the ‘NXP’  
trademarks will be replaced by reference to or use of Ampleon’s own  
trademarks.  
In the event that customer uses the product for design-in and use in  
automotive applications to automotive specifications and standards, customer  
(a) shall use the product without Ampleon’ warranty of the product for such  
automotive applications, use and specifications, and (b) whenever customer  
uses the product for automotive applications beyond Ampleon’ specifications  
such use shall be solely at customer’s own risk, and (c) customer fully  
indemnifies Ampleon for any liability, damages or failed product claims  
resulting from customer design and use of the product for automotive  
applications beyond Ampleon’ standard warranty and Ampleon’ product  
specifications.  
Translations — A non-English (translated) version of a document is for  
reference only. The English version shall prevail in case of any discrepancy  
between the translated and English versions.  
14. Contact information  
For more information, please visit:  
http://www.ampleon.com  
For sales office addresses, please visit:  
http://www.ampleon.com/sales  
BLF6G15LS-250PBRN#3  
All information provided in this document is subject to legal disclaimers.  
© Ampleon The Netherlands B.V. 2015. All rights reserved.  
Product data sheet  
Rev. 3 — 1 September 2015  
11 of 12  
BLF6G15LS-250PBRN  
Power LDMOS transistor  
15. Contents  
1
Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1  
1.1  
1.2  
1.3  
General description . . . . . . . . . . . . . . . . . . . . . 1  
Features and benefits. . . . . . . . . . . . . . . . . . . . 1  
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1  
2
3
4
5
6
7
Pinning information. . . . . . . . . . . . . . . . . . . . . . 2  
Ordering information. . . . . . . . . . . . . . . . . . . . . 2  
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2  
Recommended operating conditions. . . . . . . . 2  
Thermal characteristics . . . . . . . . . . . . . . . . . . 3  
Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . 3  
8
8.1  
8.2  
8.3  
8.3.1  
8.3.2  
8.3.3  
Application information. . . . . . . . . . . . . . . . . . . 3  
Ruggedness in class-AB operation . . . . . . . . . 4  
Impedance information . . . . . . . . . . . . . . . . . . . 4  
Graphs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
CW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
IS-95. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
2-Carrier W-CDMA (5 MHz spacing) . . . . . . . . 6  
9
Test information. . . . . . . . . . . . . . . . . . . . . . . . . 6  
Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Abbreviations. . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Revision history. . . . . . . . . . . . . . . . . . . . . . . . . 9  
10  
11  
12  
13  
Legal information. . . . . . . . . . . . . . . . . . . . . . . 10  
Data sheet status . . . . . . . . . . . . . . . . . . . . . . 10  
Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
13.1  
13.2  
13.3  
13.4  
14  
15  
Contact information. . . . . . . . . . . . . . . . . . . . . 11  
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Please be aware that important notices concerning this document and the product(s)  
described herein, have been included in section ‘Legal information’.  
© Ampleon The Netherlands B.V. 2015.  
All rights reserved.  
For more information, please visit: http://www.ampleon.com  
For sales office addresses, please visit: http://www.ampleon.com/sales  
Date of release: 1 September 2015  
Document identifier: BLF6G15LS-250PBRN#3  

相关型号：

SI9130DB

 5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

 Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

 500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明