BLL6H1214P2S-250Z [ETC]
RF FET LDMOS 50V 27DB MODULE;型号: | BLL6H1214P2S-250Z |
厂家: | ETC |
描述: | RF FET LDMOS 50V 27DB MODULE |
文件: | 总10页 (文件大小:737K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
BLL6H1214P2S-250
LDMOS L-band radar power module
Rev. 2 — 1 September 2015
Product data sheet
1. Product profile
1.1 General description
250 W LDMOS power module intended for L-band radar applications in the frequency
range from 1.2 GHz to 1.4 GHz.
Table 1.
Test information
Typical RF performance at Tcase = 25 C; tp = 1.8 ms; = 30 %; IDq = 200 mA; Pi = 26 dBm; in a
class-AB production test circuit.
Test signal
f
VDS
(V)
45
PL
Gp
add
(%)
48
tr
tf
(MHz)
(W)
(dB)
27
(ns)
15
(ns)
5
pulsed RF
1195 to 1405
190 to 290
1.2 Features and benefits
Input/output 50 matched
High flexibility with respect to pulse formats
Excellent ruggedness
High efficiency
Excellent thermal stability
Designed for broadband operation (1.2 GHz to 1.4 GHz)
Compliant to Directive 2002/95/EC, regarding Restriction of Hazardous Substances
(RoHS)
1.3 Applications
L-band radar applications in the frequency range 1.2 GHz to 1.4 GHz
BLL6H1214P2S-250
LDMOS L-band radar power module
2. Pinning information
2.1 Pinning
RF_IN
1
2
6
RF_OUT
V
DS2
aaa-012790
Top view.
Fig 1. Pin configuration
2.2 Pin description
Table 2.
Pin description
Symbol
RF_IN
RF_OUT
VGS1
Pin
1
Description
RF input
2
RF output
3
gate-source voltage 1
drain-source voltage 1
gate-source voltage 2
drain-source voltage 2
VDS1
4
VGS2
5
VDS2
6
3. Ordering information
Table 3.
Ordering information
Type number
Package
Name Description
Version
BLL6H1214P2S-250 -
pallet LDMOS; 6 mounting holes; 6 terminations
SOM039
4. Block diagram
RF_IN
RF_OUT
V
DS2
V
V
V
GS2
aaa-012365
GS1
DS1
Fig 2. Block diagram
BLL6H1214P2S-250#2
All information provided in this document is subject to legal disclaimers.
© Ampleon The Netherlands B.V. 2015. All rights reserved.
Product data sheet
Rev. 2 — 1 September 2015
2 of 10
BLL6H1214P2S-250
LDMOS L-band radar power module
5. Limiting values
Table 4.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
VDS
VGS
Tamb
Tmb
Parameter
Conditions
Min
Max
50
Unit
V
drain-source voltage
gate-source voltage
ambient temperature
mounting base temperature
storage temperature
junction temperature
-
0.5
+13
60
V
5
C
C
C
C
0
50
Tstg
20
+70
225
[1]
Tj
-
[1] Continuous use at maximum temperature will affect the reliability, for details refer to the on-line MTF
calculator.
6. Thermal characteristics
Table 5.
Thermal characteristics
Symbol Parameter
Conditions
Typ
Unit
Zth(j-c)
transient thermal impedance from
junction to case
Tcase = 50 C; Pi = 26 dBm;
tp = 1.8 ms; = 30 %
0.39 K/W
7. Characteristics
Table 6.
RF characteristics
Test signal: pulsed RF; Pi = 26 dBm; tp = 1.8 ms; = 30 %; RF performance at VDS = 45 V;
IDq = 200 mA; Tcase = 25 C; unless otherwise specified.
Symbol
f
Parameter
Conditions
Min
1210
44.7
-
Typ Max Unit
frequency
1300 1405 MHz
VDD
VGS
PL(sat)
FL
supply voltage
gate-source voltage
saturated output power
45
5
45.3
6.5
V
V
52.8
-
53.0 54.3 dBm
[1]
flatness of frequency
response
-
1.2
dB
PL
output power variation
Pi = 26 dBm 0.4 dBm
0.2
-
+0.2
0.5
-
Pdroop(pulse) pulse droop power
-
-
dB
dB
%
Gp
power gain
3 dB gain compression
-
27
48
-
add
tr
power added efficiency
rise time
45
-
-
50
50
ns
ns
tf
fall time
-
-
resp(sp)
sup(H)
MTTF
spurious response
harmonic suppression
mean time to failure
-
-
60 dBc
40 dBc
-
-
1 106
-
-
h
[1] Power flatness; testing at fixed Pi.
BLL6H1214P2S-250#2
All information provided in this document is subject to legal disclaimers.
© Ampleon The Netherlands B.V. 2015. All rights reserved.
Product data sheet
Rev. 2 — 1 September 2015
3 of 10
BLL6H1214P2S-250
LDMOS L-band radar power module
7.1 Ruggedness in class-AB operation
The BLL6H1214P2S-250 is capable of withstanding a load mismatch corresponding to
VSWR = 10 : 1 through all phases under the following conditions: VDS = 45 V;
IDq = 200 mA; Pi = 26 dBm; tp = 1.8 ms; = 30 %.
8. Test information
8.1 Graphical data
aaa-012167
32
30
28
26
24
22
20
60
50
40
30
20
10
0
(1))
G
ηη
D
(%)
p
(dB)
(2))
(3))
G
p
(1)
(2)
(3)
η
D
38
42
46
50
54
(dBm)
58
P
L
VDS = 45 V; IDq = 200 mA.
(1) f = 1195 MHz
(2) f = 1300 MHz
(3) f = 1405 MHz
Fig 3. Power gain and drain efficiency as function of output power; typical values
BLL6H1214P2S-250#2
All information provided in this document is subject to legal disclaimers.
© Ampleon The Netherlands B.V. 2015. All rights reserved.
Product data sheet
Rev. 2 — 1 September 2015
4 of 10
BLL6H1214P2S-250
LDMOS L-band radar power module
aaa-012168
aaa-012169
56
60
56
52
48
44
40
P
η
D
(%)
L
(dBm)
52
(1)
(2)
(3)
48
44
40
36
10
14
18
22
26
30
P (dBm)
34
1150
1200
1250
1300
1350
1400
1450
f (MHz)
i
VDS = 45 V; IDq = 200 mA; tp = 1.8 ms; = 30 %.
VDS = 45 V; IDq = 200 mA; tp = 1.8 ms; = 30 %;
Pi = 26 dBm.
(1) f = 1195 MHz
(2) f = 1300 MHz
(3) f = 1405 MHz
Fig 4. Output power as a function of input power;
typical values
Fig 5. Drain efficiency as a function of frequency;
typical values
aaa-012170
aaa-012171
29
12
G
RL
in
(dB)
p
(dB)
10
8
28
27
26
25
6
4
2
0
1150
1200
1250
1300
1350
1400
1450
1150
1200
1250
1300
1350
1400
1450
f (MHz)
f (MHz)
VDS = 45 V; IDq = 200 mA; tp = 1.8 ms; = 30 %;
VDS = 45 V; IDq = 200 mA; tp = 1.8 ms; = 30 %;
Pi = 26 dBm.
Pi = 26 dBm.
Fig 6. Power gain as a function of frequency; typical
values
Fig 7. Input return loss as a function of frequency;
typical values
BLL6H1214P2S-250#2
All information provided in this document is subject to legal disclaimers.
© Ampleon The Netherlands B.V. 2015. All rights reserved.
Product data sheet
Rev. 2 — 1 September 2015
5 of 10
BLL6H1214P2S-250
LDMOS L-band radar power module
9. Package outline
Pallet LDMOS; 6 mounting holes; 6 terminations
SOM039
A
U
1
B
q
2
q
3
F
2
1
q
1
U2
6
z
1
3
4
5
p
A
Z
q
q
0
20
scale
40 mm
Dimensions (mm are the original dimensions)
Unit
A
F
p
U
1
U
2
q
q
q
q
3
Z
Z
1
1
2
max
nom
min
10.4
5.0
2.7
120.0 50.0 57.1 44.1
119.8 49.8 56.9 43.9
55.1 59.1
54.9 58.9
3.1
2.9
3.1
2.9
mm
10.1
4.9
2.5
som039_po
References
JEDEC
Outline
version
European
projection
Issue date
IEC
JEITA
14-03-27
14-04-02
SOM039
Fig 8. Package outline SOM039
BLL6H1214P2S-250#2
All information provided in this document is subject to legal disclaimers.
© Ampleon The Netherlands B.V. 2015. All rights reserved.
Product data sheet
Rev. 2 — 1 September 2015
6 of 10
BLL6H1214P2S-250
LDMOS L-band radar power module
10. Handling information
CAUTION
This device is sensitive to ElectroStatic Discharge (ESD). Observe precautions for handling
electrostatic sensitive devices.
Such precautions are described in the ANSI/ESD S20.20, IEC/ST 61340-5, JESD625-A or
equivalent standards.
11. Abbreviations
Table 7.
Acronym
Abbreviations
Description
LDMOS
L-band
MTF
Laterally Diffused Metal-Oxide Semiconductor
Long wave band
Median Time to Failure
VSWR
Voltage Standing-Wave Ratio
12. Revision history
Table 8.
Document ID
BLL6H1214P2S-250#2 20150901
Revision history
Release date
Data sheet status
Change notice
Supersedes
Product data sheet
-
BLL6H1214P2S-250#1
Modifications:
• The format of this document has been redesigned to comply with the new identity guidelines
of Ampleon.
• Legal texts have been adapted to the new company name where appropriate.
BLL6H1214P2S-250#1 20140812
Product data sheet
-
-
BLL6H1214P2S-250#2
All information provided in this document is subject to legal disclaimers.
© Ampleon The Netherlands B.V. 2015. All rights reserved.
Product data sheet
Rev. 2 — 1 September 2015
7 of 10
BLL6H1214P2S-250
LDMOS L-band radar power module
13. Legal information
13.1 Data sheet status
Document status[1][2]
Product status[3]
Development
Definition
Objective [short] data sheet
This document contains data from the objective specification for product development.
This document contains data from the preliminary specification.
This document contains the product specification.
Preliminary [short] data sheet Qualification
Product [short] data sheet Production
[1]
[2]
[3]
Please consult the most recently issued document before initiating or completing a design.
The term ‘short data sheet’ is explained in section “Definitions”.
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.ampleon.com.
Ampleon product can reasonably be expected to result in personal injury,
13.2 Definitions
death or severe property or environmental damage. Ampleon and its
suppliers accept no liability for inclusion and/or use of Ampleon products in
such equipment or applications and therefore such inclusion and/or use is at
the customer’s own risk.
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Ampleon does not give any representations or
warranties as to the accuracy or completeness of information included herein
and shall have no liability for the consequences of use of such information.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Ampleon makes no representation
or warranty that such applications will be suitable for the specified use without
further testing or modification.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local Ampleon sales office. In
case of any inconsistency or conflict with the short data sheet, the full data
sheet shall prevail.
Customers are responsible for the design and operation of their applications
and products using Ampleon products, and Ampleon accepts no liability for
any assistance with applications or customer product design. It is customer’s
sole responsibility to determine whether the Ampleon product is suitable and
fit for the customer’s applications and products planned, as well as for the
planned application and use of customer’s third party customer(s). Customers
should provide appropriate design and operating safeguards to minimize the
risks associated with their applications and products.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
Ampleon and its customer, unless Ampleon and customer have explicitly
agreed otherwise in writing. In no event however, shall an agreement be valid
in which the Ampleon product is deemed to offer functions and qualities
beyond those described in the Product data sheet.
Ampleon does not accept any liability related to any default, damage, costs or
problem which is based on any weakness or default in the customer’s
applications or products, or the application or use by customer’s third party
customer(s). Customer is responsible for doing all necessary testing for the
customer’s applications and products using Ampleon products in order to
avoid a default of the applications and the products or of the application or
use by customer’s third party customer(s). Ampleon does not accept any
liability in this respect.
13.3 Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, Ampleon does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information. Ampleon takes no responsibility for
the content in this document if provided by an information source outside of
Ampleon.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
In no event shall Ampleon be liable for any indirect, incidental, punitive,
special or consequential damages (including - without limitation - lost profits,
lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Terms and conditions of commercial sale — Ampleon products are sold
subject to the general terms and conditions of commercial sale, as published
at http://www.ampleon.com/terms, unless otherwise agreed in a valid written
individual agreement. In case an individual agreement is concluded only the
terms and conditions of the respective agreement shall apply. Ampleon
hereby expressly objects to applying the customer’s general terms and
conditions with regard to the purchase of Ampleon products by customer.
Notwithstanding any damages that customer might incur for any reason
whatsoever, Ampleon’ aggregate and cumulative liability towards customer
for the products described herein shall be limited in accordance with the
Terms and conditions of commercial sale of Ampleon.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Right to make changes — Ampleon reserves the right to make changes to
information published in this document, including without limitation
specifications and product descriptions, at any time and without notice. This
document supersedes and replaces all information supplied prior to the
publication hereof.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Suitability for use — Ampleon products are not designed, authorized or
warranted to be suitable for use in life support, life-critical or safety-critical
systems or equipment, nor in applications where failure or malfunction of an
BLL6H1214P2S-250#2
All information provided in this document is subject to legal disclaimers.
© Ampleon The Netherlands B.V. 2015. All rights reserved.
Product data sheet
Rev. 2 — 1 September 2015
8 of 10
BLL6H1214P2S-250
LDMOS L-band radar power module
Non-automotive qualified products — Unless this data sheet expressly
states that this specific Ampleon product is automotive qualified, the product
is not suitable for automotive use. It is neither qualified nor tested in
accordance with automotive testing or application requirements. Ampleon
accepts no liability for inclusion and/or use of non-automotive qualified
products in automotive equipment or applications.
13.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
Any reference or use of any ‘NXP’ trademark in this document or in or on the
surface of Ampleon products does not result in any claim, liability or
entitlement vis-à-vis the owner of this trademark. Ampleon is no longer part of
the NXP group of companies and any reference to or use of the ‘NXP’
trademarks will be replaced by reference to or use of Ampleon’s own Any
reference or use of any ‘NXP’ trademark in this document or in or on the
surface of Ampleon products does not result in any claim, liability or
entitlement vis-à-vis the owner of this trademark. Ampleon is no longer part of
the NXP group of companies and any reference to or use of the ‘NXP’
trademarks will be replaced by reference to or use of Ampleon’s own
trademarks.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards, customer
(a) shall use the product without Ampleon’ warranty of the product for such
automotive applications, use and specifications, and (b) whenever customer
uses the product for automotive applications beyond Ampleon’ specifications
such use shall be solely at customer’s own risk, and (c) customer fully
indemnifies Ampleon for any liability, damages or failed product claims
resulting from customer design and use of the product for automotive
applications beyond Ampleon’ standard warranty and Ampleon’ product
specifications.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
14. Contact information
For more information, please visit:
http://www.ampleon.com
For sales office addresses, please visit:
http://www.ampleon.com/sales
BLL6H1214P2S-250#2
All information provided in this document is subject to legal disclaimers.
© Ampleon The Netherlands B.V. 2015. All rights reserved.
Product data sheet
Rev. 2 — 1 September 2015
9 of 10
BLL6H1214P2S-250
LDMOS L-band radar power module
15. Contents
1
Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1
1.2
1.3
General description . . . . . . . . . . . . . . . . . . . . . 1
Features and benefits. . . . . . . . . . . . . . . . . . . . 1
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2
2.1
2.2
Pinning information. . . . . . . . . . . . . . . . . . . . . . 2
Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 2
3
Ordering information. . . . . . . . . . . . . . . . . . . . . 2
Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3
Thermal characteristics . . . . . . . . . . . . . . . . . . 3
Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . 3
Ruggedness in class-AB operation . . . . . . . . . 4
Test information. . . . . . . . . . . . . . . . . . . . . . . . . 4
Graphical data . . . . . . . . . . . . . . . . . . . . . . . . . 4
Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 6
Handling information. . . . . . . . . . . . . . . . . . . . . 7
Abbreviations. . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Revision history. . . . . . . . . . . . . . . . . . . . . . . . . 7
4
5
6
7
7.1
8
8.1
9
10
11
12
13
Legal information. . . . . . . . . . . . . . . . . . . . . . . . 8
Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 8
Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
13.1
13.2
13.3
13.4
14
15
Contact information. . . . . . . . . . . . . . . . . . . . . . 9
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© Ampleon The Netherlands B.V. 2015.
All rights reserved.
For more information, please visit: http://www.ampleon.com
For sales office addresses, please visit: http://www.ampleon.com/sales
Date of release: 1 September 2015
Document identifier: BLL6H1214P2S-250#2
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明