DF38A-40S-03V [ETC]

0.3 mm Pitch, 1.5 mm Mated Height, Board- to-Fine Coaxial Cable Connectors;


型号：	DF38A-40S-03V
厂家：	ETC
描述：	0.3 mm Pitch, 1.5 mm Mated Height, Board- to-Fine Coaxial Cable Connectors
文件：	总10页 (文件大小：419K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

0.3 mm Pitch, 1.5 mm Mated Height, Board- to-Fine Coaxial Cable Connectors

DF38 Series

High contact reliability –

Effective mating length of 0.4 mm

3.7 0.15

ꢀ0.4ꢁ Effective mating length

■Features

Enhanced shielding

1. Small mated height and board occupied space

Small pitch (0.3mm) and mated height (1.5mm) allows use

in space-restricted areas.

Plug’s height of 1.3mm and width of 2.38mm allow its

passage through narrow openings in small-diameter hinge

applications.

2. Enhanced shielding and ground connections

Metal shells on the plug and receptacle connect to each

other with a reliable multi-point ground contacts, assuring

reliable ground connection and EMC protection.

3. Reliable lock

Fully mated condition is assured with reliable locks at 4

locations, confirming it with a distinct tactile click.

Multi-point ground contacts

4. Reliable electrical and mechanical connection

Despite its small mated height, unique contact configuration

assures highly reliable connection, with effective mating

length of 0.4mm.

4-point lock:

2 points at each end

5. Solder wicking prevention

Nickel barriers prevent solder wicking in the critical contact

areas.

6. Durable plug construction

Formed metal shells on the top and side surfaces form a strong

and rigid assembly.

■Connector for conductivity tests

We have a line-up of connectors for inspection, usable for

electrical testing of both plug and receptacle connectors.

Distinct tactile click

2010.9

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

DF38 Series■0.3 mm Pitch, 1.5 mm Mated Height, Board- to-Fine Coaxial Cable Connectors

■Specifications

Operating temperature range

Operating humidity range

Storage temperature range

Storage humidity range

AWG #42: 0.15 A

Wire size AWG #44: 0.1 A (Note.3)

AWG #46: 0.1 A

-35 to +85°C ꢀNote 1ꢁ

RH 20% to 80%

-10 to +60°C ꢀNote 2ꢁ

RH 40% to 70% ꢀNote 2ꢁ

Current rating

Voltage rating

Ratings

30 V AC

Item

Specification

Conditions

50Mø min

No flashover or insulation breakdown

Signal: 80mø max., Ground: 80mø max.

1.Insulation resistance

2.Withstanding voltage

3.Contact resistance

100V DC

100 V AC / 1 minute

100mA ꢀDC or 1,000Hzꢁ

Frequency: 10 to 55 Hz, single amplitude of

0.75 mm, 3 directions, 2 hours

4.Vibration

No electrical discontinuity of 1 µs or longer

Contact resistance ꢀchange from initial valueꢁ

50 mø max.

5.Humidity

96 hours at of 40 2°C, and humidity of 90 to 95%

Insulation resistance: 25 Mø min.

Contact resistance ꢀchange from initial valueꢁ

50 mø max.

Insulation resistance: 50 Mø min.

-55°C ■ 5 to 35°C ■ 85°C ■ 5 to 35°C

Time: 30 min. ■ 2 to 3 min. ■ 30 min. ■ 2 to 3 min.

5 cycles

6.Temperature cycle

7.Durability

Contact resistance ꢀchange from initial valueꢁ

50 mø max.

30 cycles

Reflow: At the recommended temperature profile

Manual soldering: 350°C for 3 seconds

8.Resistance to

soldering heat

No deformation of affecting performance

Note 1: Includes temperature rise caused by current flow.

Note 2: The term "storage" refers to products stored for a long period prior to mounting and use.

The operating temperature and humidity range covers the non-conducting condition of connectors after board mounting and the

temporary storage conditions of transportation, etc.

Note 3: With only the connector portion at an elevated temperature level, the rated current value is set.

Note 4: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications

for a specific part number shown.

■Material

Product

Part

Insulator

Contacts

Material

LCP

Finish

Color: Black

Gold plated

Tin plated

Color: Black

Remarks

UL94-V0

---------------

UL94-HB

UL94-V0

---------------

Receptacle

Phosphor bronze

Metal cover

Pick-and-place platform

Insulator

Polyamide

LCP

Color: Natural ꢀBeigeꢁ, Black

Gold plated

Plug

Contacts

Metal cover

Phosphor bronze

Tin plated

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

DF38 Series■0.3 mm Pitch, 1.5 mm Mated Height, Board- to-Fine Coaxial Cable Connectors

■Ordering information

■Connector

( )

DF 38 A J – ■ S – 0.3 V ■■

DF 38 J – ■ P – SHL

Series name : DF

Connector type

Series No.

: 38

S : Receptacle

Insulator typestyle

P : Plug

Receptacle A : Standard

Plug Blank : Standard

Connector style

Contact pitch : 0.3mm

Termination type

V : Straight SMT

Receptacle/Shell

SD : Fine coaxial cable plug

Packaging

J : Receptacle for conductivity tests

Blank : Standard

ꢀ51ꢁ : Embossed tape packaging

Installation item ꢀseparateꢁ

SHL : Metal cover

Number of positions : 30, 32, 40

■Combinations

■Standard use

DF38A-*S-0.3Vꢀ**ꢁ

+ DF38-*P-ASSY

DF38-*P-0.3SDꢀ**ꢁ

ꢀ _DF38-*P-SHL

ꢁ

Note: The product specification of the above combination is shown on page 2.

■Receptacle conductivity test

DF38A-*S-0.3Vꢀ**ꢁ

+ DF38J-*P-ASSY ··· ꢀNoteꢁ

DF38-*P-0.3SDꢀ**ꢁ

ꢀ _DF38J-*P-SHL

ꢁ

Note: This harness item is only usable for the receptacle test.

For the product specification of the above combination, please contact our sales department.

■Plug conductivity test

DF38AJ-*S-0.3Vꢀ**ꢁ ··· ꢀNoteꢁ

+ DF38-*P-ASSY

DF38-*P-0.3SDꢀ**ꢁ

ꢀ _DF38-*P-SHL

ꢁ

This harness item is only usable for the plug test.

Note:

For the product specification of the above combination, please contact our sales department.

* : ASSY means a harness item.

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

DF38 Series■0.3 mm Pitch, 1.5 mm Mated Height, Board- to-Fine Coaxial Cable Connectors

■Receptacles

0.2

0.15

P=0.3 0.1

0.1 0.05

Contact No.2

Contact No.1

■Recommended PCB mounting pattern

0.05

0.02

P=0.3 0.02

Contact No.2

0.05

Contact No.1

0.05

0.3 0.02

Ground areas

0.05

Refer to User Recommendation page

ꢀPara. 3ꢁ for the recommended metal

mask dimensions and open area ratios.

Note

Area indicated must be free of conductive

traces or the conductive traces must be covered by resist film.

[Specifications number] - * *, ꢀ* *ꢁ

ꢀ51ꢁ : Gold plated, Embossed tape packaging

ꢀ5,000 pieces per reelꢁ

All dimensions: mm

Part Number

CL No.

Number of Contacts

DF38A-30S-0.3Vꢀ**ꢁ

DF38A-32S-0.3Vꢀ**ꢁ

DF38A-40S-0.3Vꢀ**ꢁ

662-4505-4-**

662-4028-7-**

662-4501-3-**

8.7

9.3

11.7

13.1

13.7

16.1

9.6

12.8

13.4

15.8

13.7

14.3

16.7

0.95

1.25

0.95

2.95

3.25

3.85

3.25

2.95

3.55

10.2

12.6

Note 1: Tape and reel packaging ꢀ5,000 pieces/reelꢁ.

Order by number of reels.

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

DF38 Series■0.3 mm Pitch, 1.5 mm Mated Height, Board- to-Fine Coaxial Cable Connectors

■Plug - separate metal cover required

0.15

P=0.3 0.1

Contact No.1

All dimensions: mm

Part Number

CL No.

Number of Contacts

DF38B-30P-0.3SDꢀ**ꢁ

DF38-32P-0.3SDꢀ**ꢁ

DF38-40P-0.3SDꢀ**ꢁ

662-4515-8-**

662-4027-4-**

662-4502-6-**

14.0

14.6

17.0

8.7

9.3

11.7

9.55

10.15

12.55

Note 1: Tray packaging ꢀ100 pieces/trayꢁ.

Order by quantity of trays.

Note 2: The metal cover is required for fine coaxial cable termination.

■Recommended Fine Coaxial Cable Preparation

0.1

0.15

Inner conductor

ꢀPre-soldering

requiredꢁ ꢀNote 1ꢁ

P=0.3 0.07

0.2 MAX ꢀInsulatorꢁ

Outer shield

ꢀNO protrusionꢁ

Ø0.3 MAX ꢀJacketꢁ

0.46 MAX

ꢀGround barꢁ

Laminated tape

Note 1: Contact Hirose for Termination Procedures.

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

DF38 Series■0.3 mm Pitch, 1.5 mm Mated Height, Board- to-Fine Coaxial Cable Connectors

■Metal cover - Required for assembly of the Plug

1.22 0.15

0.15

All dimensions: mm

Part Number

DF38-30P-SHL

DF38-32P-SHL

DF38-40P-SHL

CL No.

Number of Contacts

662-4507-0

662-4029-0

662-4503-9

12.15

12.75

15.15

Note 1: Tape and reel packaging ꢀ10,000 pieces/reelꢁ.

Order by number of reels.

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

DF38 Series■0.3 mm Pitch, 1.5 mm Mated Height, Board- to-Fine Coaxial Cable Connectors

■Embossed Carrier Tape Dimensions (JIS C 0806)

■Receptacle

0.1

ꢀ1.7ꢁ

ꢀVacuum pick-up area centerꢁ

0.1

F - F

ꢀ2.1ꢁ

ꢀ1.8ꢁ

ꢀ1ꢁ

Unreeling direction

G - G

ꢀ4ꢁ

■Reel Dimensions

Part Number Label

Unreeling direction

Ø21 0.8

D⁺²

E MAX

All dimensions: mm

Part Number

CL No.

Number of Contacts

DF38A-30S-0.3Vꢀ51ꢁ

DF38A-32S-0.3Vꢀ51ꢁ

DF38A-40S-0.3Vꢀ51ꢁ

662-4505-4-51

662-4028-7-51

662-4501-3-51

28.4

14.2

32.4

38.4

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

DF38 Series■0.3 mm Pitch, 1.5 mm Mated Height, Board- to-Fine Coaxial Cable Connectors

■Embossed Carrier Tape Dimensions (JIS C 0806)

■Plug

ꢀ1.7ꢁ

0.1

ꢀVacuum pick-up area centerꢁ

0.1

F - F

ꢀ1.5ꢁ

ꢀ1.8ꢁ

Unreeling direction

G - G

ꢀ2.7ꢁ

■Reel Dimensions

Part Number Label

Ø21 0.8

D⁺²

E MAX

All dimensions: mm

Part Number

CL No.

Number of Contacts

DF38-30P-0.3SDꢀ51ꢁ

DF38-32P-0.3SDꢀ51ꢁ

DF38-40P-0.3SDꢀ51ꢁ

662-4506-7-51

662-4027-4-51

662-4502-6-51

28.4

14.2

32.4

38.4

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

DF38 Series■0.3 mm Pitch, 1.5 mm Mated Height, Board- to-Fine Coaxial Cable Connectors

■Extraction tool

For details about the extraction tool, please contact your Hirose sales representative.

■Usage Recommendations

1. Recommended temperature profile

Temperature ꢀçꢁ

250

200

150

100

250ç

220ç

60sec.

180ç

max.

150ç

90 to 120sec.

Room

temperature

100

150

200

250

300

Time ꢀsec.ꢁ

Solder composition: Paste, 96.5%Sn/3.0%Ag/0.5%Cu

Note 1: Up to 2 cycles of Reflow soldering are possible under the

same conditions, provided that there is a return

to normal temperature between the first and second cycle.

Note 2: The temperature profile indicates the board surface temperature

at the point of contacts with the connector terminals.

2.Recommended manual soldering

Manual soldering: 350ç for 3 seconds

Do NOT use flux compound when manual soldering.

Thickness: 0.1 mm

Open area ratio: Lead terminal: 80%

Ground terminal: 100%

3.Recommended screen thickness and open

area ratio ꢀPattern area ratioꢁ

4.Board warpage

Maximum of 0.02mm at the connector center, with both ends of the

connector as reference points.

Refer to “Nylon Connector Use Handbook”.

5.Cleaning conditions

6.Precautions

* Mating and un-mating of the connectors when not soldered on the

boards is not recommended as this may cause deformation of the

terminals, damage to the contacts or insulators.

* When mating/un-mating do not twist or lift by the corners. Apply the

forces evenly across the entire length and width of the connectors

taking care NOT to damage or deform soldered terminations.

* Slight discoloration on the insulating materials will not affect form,

fit or function of the connectors.

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

DF38 Series■0.3 mm Pitch, 1.5 mm Mated Height, Board- to-Fine Coaxial Cable Connectors

■Precautions

Precautions

■Mating

Mate the plug with the receptacle by pressing straight against the entire plug surface.

Do NOT un-mate the plug while holding by the terminated cable.

Plug

Lock areas

Receptacle

■Un-mating

Use a dedicated extraction tool to un-mate the plug. Insert the tool under either end of the plug ꢀclearanceꢁ and pull straight up as illustrated.

Do NOT un-mate the plug while holding by the terminated cable.

Extraction tool

End side ꢀclearanceꢁ

■Routing of the fine coaxial cable after termination

Allow sufficient clearance between the plug and the fine coaxial cable to avoid sharp bend, excessive twist or pull forces applied to the connector.

No pulling

■Other

· Do NOT mate / un-mate the connectors when receptacle is not mounted on the board.

· Different production lots may exhibit different shades of the insulator materials. No affect on form, fit or function of the connectors.

· Rework of the soldered terminations on the board-mounted receptacles is not possible.

· Sides of the metal cover protrude over the termination areas.

· Do not mate / un-mate the connectors when receptacle is not mounted on the board.

DF38A-40S-03V [ETC]

相关型号：

DF38AJ-30S-0.3V(51)

DF3A-10EP-2A

DF3A-10EP-2C

DF3A-10EP-2DS

DF3A-10EP-2DSA

DF3A-10EP-2H

DF3A-10EP-2R26

DF3A-10EP-2R28

DF3A-10EP-2V

DF3A-10P-2A

DF3A-10P-2C

DF3A-10P-2DS