DRC3P48C400R [ETC]
RELAY SSR 480 V;型号: | DRC3P48C400R |
厂家: | ETC |
描述: | RELAY SSR 480 V |
文件: | 总12页 (文件大小:1636K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DIN Rail Mount
Datasheet
DRC Series
• 7.6 Amp AC Semiconductor Motor Controller
• Load voltage range up to 600 VAC
• Fits standard 35mm DIN Rail
• LED input status indicator
• AC or DC control
• Zero Voltage (resistive loads) or instantaneous (inductive loads) turn-on output
•
C-UL-US Listed, IEC Rated, CE & RoHS Compliant, Horsepower Rated
• Built-in Overvoltage Protection
• Ultra-efficient thermal management design (Patented)
Start / Stop
Reversing
Solicon DRC3 Series are Solid State Contactors intended for
frequently switching on and off three phase loads up to 5 HP, 600
VAC 7.6 Amps. They are available in both contactor versions
DRC3P and reversing contactor versions DRC3R.
instantaneous change of direction is commanded, then it will
delay the direction change by 100msec in order to prevent
simultaneous forward and reverse operations.
All the models of Solicon DRC3 Series combine the benefits and
advantages of a solid state contactor with the functionality and
simplicity of use of an electromechanical contactor thanks to the
proprietary thermal management technology (Patented) and
complete electrical insulation (no grounding required); the
embedded auxiliary contacts, normally open and/or normally
closed, are intended to be used at 18-280VAC. Five different
control voltages are available in order to cover most applications.
All models include overvoltage protection.
The Solicon Contactor DRC3P is available in either instantaneous
turn-on (for Motor Control) or zero voltage turn-on (for Resistive
Loads). It is available in either 2 or 3 controlled leg versions. The
2 legs control version is particularly suitable for motor control
circuits where the neutral conductor is not utilized.
The Solicon Reversing Contactor DRC3R includes an interlock
control that allows only off, forward and reverse operation in a
safe mode while providing high space saving; it switches
instantaneously upon application of the control voltage unless an
PRODUCT SELECTION
Control Voltage
230 VAC
120 VAC
48 VAC/DC
24 VAC/DC, 24 VAC
24 VDC
Without Auxiliary Contact
DRC3P48A400, DRC3R48A400
DRC3P48B400, DRC3R48B400
DRC3P48C400, DRC3R48C400
DRC3P48D400, DRC3R48D400
DRC3R48E400
1 NO+NC Auxiliary Conctat
DRC3P48A411
2 NO Auxiliary Contact
DRC3P48A420, DRC3R48A420
DRC3P48B420, DRC3R48B420
DRC3P48C420, DRC3R48C420
DRC3P48D420, DRC3R48D420
DRC3R48E420
DRC3P48B411
DRC3P48C411
DRC3P48D411
AVAILABLE OPTIONS
Operating Voltage
40: 400 VAC
(3R function only)
48: 480 VAC
60: 600 VAC
Load Current per Phase
4: 7.6 Amp FLA
(x2 Controlled Legs
& 3R function);
4.8 Amp FLA
Switching Mode
(3P function only)
Blank: Zero Voltage Turn-On
(3P function only)
Series
(x3 Controlled Legs only) R: Instantaneous Turn-On
4
DRC 3P 48
D
00
R
2
Function
Control Voltage
Auxiliary Contacts,
N.O. - N.C.
Controlled Legs
3P: Contactor
A: 208-265 VAC
(3P function only)
3R: Reversing Contactor B: 90-140 VAC
C: 36-55 VAC/DC
D: 18-30 VAC/DC
(3P function only)
00: Not included
Blank: 3 Controlled Legs
2: 2 Controlled Legs
11: 1 Solid State Auxiliary
Contact, Normally Open;
1 Solid State Auxiliary
Contact, Normally Closed
(3P function only)
20: 2 Solid State Auxiliary
Contacts, Normally Open
18-30 VAC
(3R function only)
E: 18-30 VDC
Required for valid part number
(3R function only)
For options only and not required for valid part number
FDE-07-01 REV. A
Do not forget to visit us at: www.crydom.com
Copyright © 2018 Crydom Inc. Specifications subject to change without notice.
DIN Rail Mount
Datasheet
OUTPUT SPECIFICATIONS (1)
Description
Operating Voltage (47-63Hz) [Vrms]
Transient Overvoltage [Vpk] (2)(3)
Maximum Off-State Leakage Current @ Rated Voltage [mArms]
Maximum Off-State dv/dt @ Maximum Rated Voltage [V/µsec]
DRC3P48x4x DRC3P48x4x2 DRC3P60x4x DRC3P60x4x2 DRC3R40x4x DRC3R48x4x
48-530
1200
3.0
48-530
1200
3.0
48-600
1200
1.0
48-600
1200
1.0
48-415
1200
5.5
48-510
1600
5.5
500
500
500
500
500
500
Load Current, General Use UL508 /AC51 @40°C [Arms] (4)
Load Current, Motor Controller UL508 /AC-53a @480VAC [Arms] (4)
Minimum Load Current [Arms]
5
4.8
0.15
7.6
7.6
0.15
5
4.8
0.15
7.6
7.6
0.15
7.6
7.6
0.15
7.6
7.6
0.15
Maximum Surge Current [Apk] 1 Cycle 60Hz
750
750
750
750
750
625
Maximum Surge Current [Apk] 1 Cycle 50Hz
716
2330
2560
716
2330
2560
716
2330
2560
716
2330
2560
716
2330
2560
597
1621
1779
Maximum I2t for Fusing (8.33msec)[A2sec]
Maximum I2t for Fusing (10msec)[A2sec]
Maximum On-State Voltage Drop @ Rated Current [Vpk]
Minimum Power Factor (with Maximum Load)
Ratings according to UL 508/IEC60947-4-2 [HP/kW]: 240 VAC
Ratings according to UL 508/IEC60947-4-2 [HP/kW]: 400 VAC
Ratings according to UL 508/IEC60947-4-2 [HP/kW]: 480 VAC
Motor Ratings @ 600 VAC [HP/kW]
1.35 per channel
1.35 per channel
1.35 per channel
0.7
1.35 per channel
0.7
1.5 per channel
1.5 per channel
0.5
1/.75
2/1.5
3/2.2
-
0.5
2/1.5
3/2.2
5/3.7
-
0.5
2/1.5
3/2.2
-
0.5
2/1.5
3/2.2
5/3.7
-
1/.75
2/1.5
3/2.2
3/2.2
2/1.5
3/2.2
5/3.7
5/3.7
-
INPUT SPECIFICATIONS (1)
Description
Control Voltage Range (5)
Minimum Turn-On Voltage (6)
Must Turn-Off Voltage
Minimum Input Current (for on-state) [mA]
Maximum Input Current [mA]
Nominal Input Impedance [Ohms]
Maximum Delay to Turn-On [msec] (7)
Maximum Turn-Off Time [msec] (8)
Option A
Option B
90-140 VAC
90 VAC
10 VAC
7.5
13
12.5k
30
40
Option C
Option D
Option E
18-30 VDC
18 VDC
4 VDC
12.5
32
0.93k
100 30
20
208-265 VAC
36-55 VAC / VDC
18-30 VAC / VDC
208 VAC
40 VAC
6.1
8
33k
36 VAC / VDC
4 VAC / VDC
18 VAC / VDC
4 VAC / VDC
12
20
3k
30
40
12.5
32
0.93k
20
30
40
30
SOLID STATE AUXILIARY CONTACTS(1)
Description
Operating Voltage Range (47-63Hz) [Vrms] (9)
Transient Overvoltage [Vpk]
Normally Open Suffix 2x,1x
Normally Closed Suffix x1
18-280
600
1
18-280
600
1
Maximum Load Current [Arms]
Minimum Load Current [mA]
5
5
Maximum Surge Current [Apk] 1 Cycle 60Hz
Maximum Surge Current [Apk] 1 Cycle 50Hz
Maximum I2t for Fusing (8.33msec)[A2sec]
Maximum I2t for Fusing (10msec)[A2sec]
Maximum Off-State Leakage Current @ Rated Voltage [mArms]
Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec]
Maximum Delay to Turn-On [msec] (7)
Maximum Turn-Off Time [msec]
40
38
40
38
6.7
7.2
0.1
500
30
6.7
7.2
5 mA
500
80
40
40
GENERAL SPECIFICATIONS(1)
Description
Parameters
Dielectric Strength, Input/Output/Base (50/60Hz) (10)
Minimum Insulation Resistance (@ 500 VDC)
Maximum Capacitance, Input/Output
Ambient Operating Temperature Range (11)
Ambient Storage Temperature Range
Weight (typical)
3750 Vrms
109 Ohms
20 pF
-30 to 80 °C
-40 to 100 °C
2 Controlled Legs (6.9 oz [197 g]) / 3 Controlled Legs (8.0 oz [228 g])
Housing Material
Housing Color
LED Status Indicator (color) (12)
Short Circuit Current Rating (13)
UL94 V-0
Black and Light Gray
Forward (Green) / Reverse (Amber)
100kA
MTBF (Mean Time Between Failures) at 40°C ambient temperature (14)
MTBF (Mean Time Between Failures) at 60°C ambient temperature (14)
1,398,000 hours (159 years)
390,000 hours (44 years)
Pollution Degree
2
Protection Degree (15)
Humidity
IP20
85% non-condensing
Control and Auxiliary Contact Terminal Screw Torque Range (in-lb/Nm)
Load Terminal Screw Torque Range (in-lb/Nm)
Input Terminal Wire Capacity
12 / 1.36
15 / 1.7
18-12 AWG (IEC 1-4 mm2) (stranded /solid)
18-10 AWG (IEC 1-6 mm2 ) (stranded /solid)
Output Terminal Wire Capacity
Do not forget to visit us at: www.crydom.com
Copyright © 2018 Crydom Inc. Specifications subject to change without notice.
DIN Rail Mount
Datasheet
MECHANICAL SPECIFICATIONS(1)
Tolerances: ±±0±ꢀ ꢁn ꢂ ±0. ꢃꢃ
All dꢁꢃensꢁons are ꢁn: ꢁnches [ꢃꢁllꢁꢃeters]
30.1
[89]
ꢀ091
[7309]
±0ꢀ3
[.08]
A3
13
23
A1
DRC3
IND. CONT. EQ.
ꢀ0.8
[6.0.]
1068
[4ꢀ07]
10ꢀ3
[3103]
ꢀ0ꢀ9
[.803]
3041
[8607]
XXXX
INPUT
STATUS
14
24
A2
3076
[9.06]
1078
[4.03]
Fig. 1
TERMINAL SCREW TYPE
Top/Bottom view (Fig. 1)
(16)
THERMAL DERATE INFORMATION
DRC3P (3 controlled legs)
DRC3P (2 controlled legs) & DRC3R
Single unit (17)
Multiple units
Single unit (17)
Multiple units
6
.
4
3
ꢀ
1
±
8
7
6
.
4
3
ꢀ
1
±
±
1±
ꢀ±
3±
4±
.±
6±
7±
8±
±
1±
ꢀ±
3±
4±
.±
6±
7±
8±
Ambient Temperature (ºC)
Ambient Temperature (ºC)
Do not forget to visit us at: www.crydom.com
Copyright © 2018 Crydom Inc. Specifications subject to change without notice.
DIN Rail Mount
Datasheet
SWITCHING FREQUENCY/LOAD CHARACTERISTIC FOR ALL DEVICES
IL : Load Operating Current
IR : Rated Full Load Current [FLA]
ID : Direct-On-Line Inrush Current
tL : Load Operating Current Time
tD : Direct-On-Line Inrush Current Time
tC : Cycle Time
ID
IR
tOn : On Time
Off : Off Time
IL
t
tD
tL
tOn
tOff
tC
MAXIMUM ALLOWABLE NUMBER OF STARTS PER HOUR DEPENDING ON THE STARTING
TIME tD AND THE ON PERIOD tOn (as for standard IEC 60947-4-2) FOR ALL DEVICES
Without overload relay (limit given by the contactor itself)
Table 1
Table 2
Table 3
• Low inrush current (ID/IR < 4 )
• Full load (IL/IR= 1)
Table 4
• Low inrush current (ID/IR < 4 )
• 60% load (IL/IR= 0.6)
• High inrush current (ID/IR = 4 to 7.2)
• Full load (IL/IR= 1)
• High inrush current (ID/IR = 4 to 7.2)
• 60% load (IL/IR= 0.6)
tOn (sec)
tOn (sec)
tOn (sec)
tOn (sec)
tD (sec)
0.05
0.1
0.1
5000
3200
-
1
10
100
35
35
35
35
35
30
25
tD (sec)
0.05
0.1
0.1
6000
4100
-
1
10
100
35
35
35
35
35
35
35
tD (sec)
0.05
0.1
0.1
7450
4050
-
1
10
100
35
35
35
35
35
35
35
tD (sec)
0.05
0.1
0.1
1
10
100
35
35
35
35
35
35
35
2700
1950
950
500
290
350
350
320
280
160
110
75
3550
3000
1300
700
350
350
350
320
320
125
90
3200
2100
1200
650
350
350
350
320
280
180
90
9000
3550
3550
1700
850
350
350
350
350
350
240
180
5400
0.2
0.2
0.2
0.2
-
-
-
-
-
-
0.4
0.4
0.4
0.4
0.8
0.8
400
0.8
350
0.8
560
-
-
-
1.6
1.6
-
-
1.6
1.6
-
-
-
-
-
-
-
-
-
-
-
-
-
-
3.2
3.2
3.2
3.2
With overload relay (limit given by the overload relay itself)
Table 5
Table 6
Table 7
• Low inrush current (ID/IR < 4 )
• Full load (IL/IR= 1)
Table 8
• Low inrush current (ID/IR < 4 )
• 60% load (IL/IR= 0.6)
• High inrush current (ID/IR = 4 to 7.2)
• Full load (IL/IR= 1)
• High inrush current (ID/IR = 4 to 7.2)
• 60% load (IL/IR= 0.6)
tOn (sec)
tOn (sec)
tOn (sec)
tOn (sec)
tD (sec)
0.05
0.1
0.1
1
10
330
280
255
150
60
100
30
28
26
24
20
16
tD (sec)
0.05
0.1
0.1
2800
1700
-
1
10
320
310
290
200
90
100
35
32
30
26
25
25
-
tD (sec)
0.05
0.1
0.1
1
10
100
35
34
33
32
30
25
20
tD (sec)
0.05
0.1
0.1
1
10
100
35
35
35
35
35
35
25
2200
1650
1000
550
250
80
1800
1300
650
300
200
5150
2800
1920
1100
600
260
250
250
200
200
120
75
5600
3200
2700
1400
700
350
350
350
350
280
170
80
1500
2850
3200
0.2
0.2
0.2
-
-
-
-
-
0.2
-
-
-
-
-
-
-
-
-
0.4
0.4
0.4
0.4
0.8
0.8
0.8
320
0.8
350
-
1.6
40
1.6
65
1.6
1.6
-
-
-
-
-
-
-
-
-
-
-
-
-
3.2
3.2
3.2
3.2
Do not forget to visit us at: www.crydom.com
Copyright © 2018 Crydom Inc. Specifications subject to change without notice.
DIN Rail Mount
Datasheet
SHORT CIRCUIT AND OVERLOAD PROTECTION FOR ALL DEVICES
(Conforming to the IEC60947-4-2 and UL508)
IEC standard 60947-4-1 make a distinction between two different types of protection, (called “coordination”), which are designated types “1” and "2".
Any short-circuit that occurs is cleared safely by either type of coordination.
The only difference between the 2 categories concerns the extent of the SSR damage caused by the short-circuit.
Type "1" coordination requires that in the event of a short-circuit, the Solid State Contactor does not endanger personnel or installations,
but permanent damage to the SSC is permissible. In this case the SSC may need to be replaced. For this type of co-ordination,
the use of fusing or circuit breakers adequate to protect the system and wiring from short circuits, (but not specifically considering SSC protection), can be used.
Type "2" coordination requires that under a short-circuit condition, the circuit is interrupted, the SSC does not endanger persons or installations,
and in addition the SSR will be able to operate after the fault condition is repaired.
Type of coordination 1
Protection by Thermal Magnetic Circuit Breaker (18)
Thermal Magnetic Circuit Breaker Solid State Contactor
Solid State Contactor
3 controlled legs
Solid State Contactor
Reversing
Nominal Motor
Current
(Schneider Electric)
GV2ME04 / GV2P04
GV2ME05 / GV2P05
GV2ME06 / GV2P06
GV2ME07 / GV2P07
GV2ME08 / GV2P08
GV2ME10 / GV2P10
GV2ME14 / GV2P14
2 controlled legs
0.40-0.63 A
0.63-1 A
1-1.6 A
DRC3Pxx4x2
DRC3Pxx4x
DRC3Pxx4x
DRC3Pxx4x
DRC3Pxx4x
DRC3Pxx4x
DRC3Pxx4x (up to 4.8A)
-
DRC3Rxx4x
DRC3Pxx4x2
DRC3Rxx4x
DRC3Pxx4x2
DRC3Rxx4x
1.6-2.5 A
2.5-4 A
DRC3Pxx4x2
DRC3Rxx4x
DRC3Pxx4x2
DRC3Rxx4x
4-6.3 A
DRC3Pxx4x2
DRC3Rxx4x
6.3-10 A
DRC3Pxx4x2 (up to 7.6A)
DRC3Rxx4x (up to 7.6A)
Protection by overload relays and fuses (18)
Class gG fuses Solid State Contactor
Nominal Motor Overload Relay
Solid State Contactor Solid State Contactor
(Schneider Electric) (example from Littlefuse) 2 controlled legs
3 controlled legs
DRC3Pxx4x
DRC3Pxx4x
DRC3Pxx4x
DRC3Pxx4x
DRC3Pxx4x
DRC3Pxx4x(up to 4.8A)
-
Reversing
Current
0.40-0.63 A
0.63-1 A
1-1.6 A
LRD04
LRD05
LRD06
LRD07
LRD08
LRD10
LRD14
CY14X51G16
CY14X51G16
CY14X51G25
CY14X51G25
CY14X51G25
CY14X51G40
CY14X51G40
DRC3Pxx4x2
DRC3Rxx4x
DRC3Pxx4x2
DRC3Rxx4x
DRC3Pxx4x2
DRC3Rxx4x
1.6-2.5 A
2.5-4 A
DRC3Pxx4x2
DRC3Rxx4x
DRC3Pxx4x2
DRC3Rxx4x
4-6.3 A
DRC3Pxx4x2
DRC3Rxx4x
6.3-10 A
DRC3Pxx4x2 (up to 7.6A)
DRC3Rxx4x (up to 7.6A)
Type of coordination 2
Protection by overload relays and fuses (18)
Semiconductor fuses with less than 1621A2S Solid State Contactor
Nominal Motor Overload Relay
Solid State Contactor Solid State Contactor
(Schneider Electric) Littlefuse SIBA (Cylindric) Ferraz (Cylindric) 2 controlled legs
3 controlled legs
Reversing
Current
0.40-0.63 A
0.63-1 A
1-1.6 A
LRD04
LRD05
LRD06
LRD07
LRD08
LRD10
LRD14
LA50QS40-4
LA50QS40-4
LA50QS40-4
LA50QS40-4
LA50QS40-4
LA50QS40-4
LA50QS40-4
50.058.06.40
50.058.06.40
50.058.06.40
50.058.06.40
50.058.06.40
50.058.06.40
50.058.06.40
A093909
A093909
A093909
A093909
A093909
A093909
A093909
DRC3Pxx4x2
DRC3Pxx4x
DRC3Rxx4x
DRC3Pxx4x2
DRC3Pxx4x
DRC3Rxx4x
DRC3Pxx4x2
DRC3Pxx4x
DRC3Rxx4x
1.6-2.5 A
2.5-4 A
DRC3Pxx4x2
DRC3Pxx4x
DRC3Rxx4x
DRC3Pxx4x2
DRC3Pxx4x
DRC3Rxx4x
4-6.3 A
DRC3Pxx4x2
DRC3Pxx4x (up to 4.8A)
-
DRC3Rxx4x
6.3-10 A
DRC3Pxx4x2 (up to 7.6A)
DRC3Rxx4x (up to 7.6A)
Note: All the Schneider Electric Thermal magnetic circuit breakers GV2 family (GV2ME and GV2P) is fully mechanical compatible with the DRC contactor using the GV2AF3 connection block.
All the Schneider Electric Overload relay LRD family is fully mechanical compatible with the DRC contactor without the need of any adapter.
The DRC Series can accept the LAD7C1 module (pre-wiring kit allowing direct connection of the NC contact of relay LRD to the contactor)
Do not forget to visit us at: www.crydom.com
Copyright © 2018 Crydom Inc. Specifications subject to change without notice.
DIN Rail Mount
Datasheet
WIRING AND BLOCK DIAGRAM
(19)
DRC3P CONTACTOR
DRC3Pxx400
DRC3Pxx411
DRC3Pxx420
48-530 VAC, 50-60 Hz
48-600 VAC, 50-60 Hz
L1
L2
L3
L1
L2
L3
Short circuit and overload
current protection (see page 5)
/ >
/ >
/ >
/ >
/ >
/ >
/ >
/ >
/ >
L1
L2
L3
L1
L2
L3
L1
L2
L3
A1
13
21
A1
13
23
A1
DRC3PXXX400XX
DRC3PXXX411XX
DRC3PXXX420XX
IND. CONT. EQ.
IND. CONT. EQ.
IND. CONT. EQ.
CONTROL
INPUT
CONTROL
INPUT
CONTROL
INPUT
XXXX
XXXX
XXXX
INPUT
INPUT
INPUT
STATUS
STATUS
STATUS
A2
14
22
A2
14
24
A2
T1
T2
T3
T1
T2
T3
T1
T2
T3
General Use /
AC-51 Application
Motor Controller /
AC-53a Application
T1
T2
T3
T1
T2
T3
T1
T2
T3
T1
T2
T3
T1
T2
T3
M
3
DRC3P
(3 controlled legs model)
Main Circuit
DRC3P
(2 controlled legs model)
Main Circuit
L1
L2
L3
A1
L1
L2
L3
A1
T1
T2
T3
A2
T1
T2
T3
A2
DRC3Pxx400
DRC3Pxx420
(2 Normally Open)
DRC3Pxx411
(1 Normally Open - 1 Normally Closed)
Auxiliary Contacts
Auxiliary Contacts
13 23
13 21
Without Auxiliary Contacts
14 24
14 22
Do not forget to visit us at: www.crydom.com
Copyright © 2018 Crydom Inc. Specifications subject to change without notice.
DIN Rail Mount
Datasheet
(20)
DRC3R REVERSING CONTACTOR
DRC3Rxx400
DRC3Rxx420
48-415 VAC, 50 - 60 Hz
48-510 VAC, 50 - 60 Hz
L1
L2
L3
L1
L2
L3
Short circuit and overload current
protection (see page 5)
/ >
/ >
/ >
/ >
/ >
/ >
L1
A3
L2
L3
L1
A3
L2
L3
A1
13
23
A1
CONTROL
INPUT
(Forward)
CONTROL
INPUT
(Forward)
CONTROL
INPUT
(Reverse)
CONTROL
INPUT
(Reverse)
DRC3RXXX400XX
DRC3RXXX420XX
IND. CONT. EQ.
IND. CONT. EQ.
XXXX
XXXX
INPUT
INPUT
STATUS
STATUS
A2
14
24
A2
CONTROL
INPUT
(Common)
CONTROL
INPUT
(Common)
T1
T2
T3
T1
T2
T3
Motor Controller /
AC-53a Application
T1
T2
T3
T1
T2
T3
T1
T2
T3
M
3
Overload current
protection needs to
be considered
DRC3R
Forward
Reverse
Forward
13
Reverse
23
L1
T1
L2
L3
T3
A1
A2
L1
T1
L2
L3
A3
A2
14
24
T2
T3
T2
DRC3Rxx420
models only
Do not forget to visit us at: www.crydom.com
Copyright © 2018 Crydom Inc. Specifications subject to change without notice.
DIN Rail Mount
Datasheet
TIMING DIAGRAM
TIMING DIAGRAM FOR DRC3R
Input/Output
1
2
3
4
5
6
7
8
9
10
Input A1
Input A3
100 msec
100 msec
FWD Direction
REV Direction
100 msec
interlock
STEP
DESCRIPTION
Initial Condition. A1 & A3 open
1, 4, 10
Input A3
Input A1
2
A1 is activated, FWD Output waits for 100msec
FWD direction is activated
FWD
REV
3, 9
4
Open
Close
Open
Close
Open
Open
Close
Close
Off
Off
A1 changes to off. FWD Output is disabled at the same time
A3 is activated. REV Outputs waits for 100msec
REV direction is On
On
Off
Off
Off
On
Off
5
6
7
Interlock fuction is activated. REV is disabled due to A1 & A3 both being active
A3 is open, A1 is closed, activation delayed 100msec
8
AGENCY APPROVALS
Agency Approvals
Certification in accordance with:
United States Standard for Industrial Control Equipment - UL 508 and
Canadian Standard Association for Industrial Control Equipment – C22.2 No. 14.
DRC3 series conforms to the harmonized EN standard EN/IEC 60947-4-2
Electromagnetic Compatibility:
IEC 61000-4-2 : Electrostatic Discharge – Level 3
IEC 61000-4-4 : Electrically Fast Transients – Level 3
IEC 61000-4-5 : Electrical Surges – Level 3
Vibration Resistance:
IEC 60068-2-6 : Amplitude Range 10-55 Hz, Displacement 0.75mm
Shock Resistance:
IEC 60068-2-27 : Peak Acceleration 15g, Duration11msec.
E116949
Do not forget to visit us at: www.crydom.com
Copyright © 2018 Crydom Inc. Specifications subject to change without notice.
DIN Rail Mount
Datasheet
ACCESSORIES FOR ALL DEVICES
Recommended Accessories
Motor Nominal
Current
Bimetal
Overload Relay
Electronic
Overload Relay
Thermal Magnetic Circuit Thermal Magnetic Circuit
Breaker (Push Button)
Breaker (Selector)
0.40 - 0.63 A
0.63 - 1 A
1 - 1.6 A
LRD04
LRD05
LRD06
LRD07
LRD08
LRD10
LRD14
LR97 D015xx
LR97 D015xx
LR97 D07xx
LR97 D07xx
LR97 D07xx
LR97 D25xx
LR97 D25xx
GV2ME04
GV2ME05
GV2ME06
GV2ME07
GV2ME08
GV2ME10
GV2ME14
GV2P04
GV2P05
GV2P06
GV2P07
GV2P08
GV2P10
GV2P14
1.6 - 2.5 A
2.5 - 4 A
4 - 6.3 A
6.3 - 10 A
Fully compatible with
Schneider Electric
thermal overload
relays &
thermal magnetic
circuit breakers
Note: All the Schneider Electric Thermal magnetic circuit breakers GV2 family (GV2ME and GV2P) is fully mechanical compatible with the DRC contactor using the GV2AF3 connection block.
All the Schneider Electric Overload relay LRD family is fully mechanical compatible with the DRC contactor without the need of any adapter.
The DRC Series can accept the LAD7C1 module (pre-wiring kit allowing direct connection of the NC contact of relay LRD to the contactor)
When the LAD7C1 module is used, the common terminal for the control input is not anymore the ”A2” terminal of DRC but it is the “96” terminal of the overload relay.
ID Marker Strips
CNLB, CNLN, CNL2
Packages of 10 plastic strips comprising 10
individual markers which can be placed for easy
identification during the use of multiple units.
Blank Strips
Part no.: CNLB
Numbered 1 to 10 Strips
Numbered 11 to 20 Strips
Part no.: CNLN
Part no.: CNL2
Do not forget to visit us at: www.crydom.com
Copyright © 2018 Crydom Inc. Specifications subject to change without notice.
DIN Rail Mount
Datasheet
GENERAL NOTES
(1) All parameters at 25°C unless otherwise specified.
(2) For DRC3P relay will self trigger between 900-1200V, Not suitable for capacitive loads.
(3) For DRC3R over rated voltage internal self protection will be activated increasing leakage current.
(4) Mounted in the Vertical position.
(5) On DRC3R models the range for option D is 18-30 VAC.
(6) For low temperature operation consider nominal control voltage.
(7) For DRC3R the turn-on time is 100msec 30msec.
(8) When is complete removed the control signal. For DRC3R the turn-off time is 20msec.
(9) Operating voltage range 18-30 VDC is also valid when used to latch the DRC contactor control input.
(10) For input to auxiliary output the dielectric strength is 2.5kV.
(11) UL approval up to 40°C surrounding temperature.
(12) Reverse Amber Indicator is for DRC3R models only.
(13) 100kA, 480VAC, when protected with CC class fuses rated 600VAC, 20 A or equivalent.
(14) All parameters at 50% power rating and 100% duty cycle (contact Crydom tech support for detailed report).
(15) IP20 rating is not associated with the UL approval.
(16) Derate information is valid when DCR contactors are used with or without accessories, installed on top and/or bottom.
(17) Minimum spacing to obtain max. current is 22mm between adjacent units.
(18) Combinations of these Protective Devices and Solid State Contactor have not been evaluated by UL.
(19) For DRC3P models external loads can be connected in parallel to the control input.
(20) DRC3R internal safety interlock circuit prevents the product to work if any leakage current is present in the control input currently not enabled.
Rev. 062918
ECN#20485
Do not forget to visit us at: www.crydom.com
Copyright © 2018 Crydom Inc. Specifications subject to change without notice.
DIN Rail Mount
Datasheet
DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / 危险
HAZARD OF
ELECTRIC
SHOCK,
EXPLOSION,
OR ARC FLASH.
RIESGO DE
DESCARGA
ELECTRICA O
EXPLOSION.
RISQUE DE
GEFAHR EINES
ELEKTRISCHE
N SCHLAGES
ODER EINER
EXPLOSION.
RISCHIO DI
SCOSSA
ELETTRICA O
DELL’ESPLOSIONE.
存在电击、
爆炸或电弧
闪烁危险
DESCHARGE
ELECTRIQUE
OU EXPLOSION
•
在操作此设
备之前请先
关闭电源。
• Eteindre
toutes les
sources
d'énergie de
cet appareil
avant de
travailler
dessus de cet
appareil
• Spenga tutta
l'alimentazione
che fornisce
questa
apparecchiatura
prima di lavorare
a questa
• Desconectar
todos los
suministros de
energia a este
equipo antes
de trabajar
• Disconnect all
power before
installing or
working with
this equipment.
• Stellen Sie
jeglichen
Strom ab, der
dieses Gerät
versorgt, bevor
Sie an dem
若不遵守这些说明,
可能会导致严重的
人身伤害甚至死亡。
con este equipo.
• Verify all
connections
and replace all
covers before
turning on
Gerät Arbeiten
durchführen
apparecchiatura
• Verificar todas
las conexiones
y colocar todas
las tapas antes
de energizer
• Verificare tutti
i collegamenti
e sostituire
tutte le coperture
prima
• Vor dem
Drehen auf
Energie alle
Anschlüsse
überprüfen
und alle
• Vérifier tous
connections, et
remettre tous
couverts en
olace avant de
mettre sous
power.
el equipo.
Failure to follow
these
instructions will
result in death
or serious injury.
dell’accensione
El
Abdeckungen
ersetzen.
L'omissione di
queste istruzioni
provocherà la
morte o
incumplimiento
de estas
instrucciones
puede provocar
la muerte o
lesiones serias.
De non-suivi de
ces instructions
provoquera la
mort ou des
lésions sérieuses
sérieuses.
Unterlassung
dieser
Anweisungen
können zum
Tode oder zu
schweren
lesioni serie
Verletzungen
führen.
WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA / AVVERTENZA / 警告
RISQUE DE DOMMAGE MATERIEL ET DE
SURCHAUFFE DU BOITIER
GEFAHR VON MATERIALSCHÄDEN UND
GEHÄUSEERHITZUNG
RISK OF MATERIAL DAMAGE AND HOT
ENCLOSURE
• Les panneaux latéraux du produit peuvent être
chauds. Laisser le produit refroidir avant de le
toucher.
• Respecter les consignes de montage, et
notamment les couples de serrage.
• Ne pas laisser pénétrer de liquide ni de corps
étrangers à l'intérieur du produit.
• Die Seitenwände können heiß sein. Lassen Sie
das Produkt abkühlen, bevor Sie es berühren.
• Beachten Sie die Montageanweisungen,
• Führen Sie keine Flüssigkeiten oder
• The product's side panels may be hot, allow
the product to cool before touching.
• Follow proper mounting instructions including
torque values.
• Do not allow liquids or foreign objects to enter
this product.
Fremdkörper in das Produkt ein.
Le non-respect de cette directive peut entraîner,
des lésions corporelles graves ou des
dommages matériels.
Die Nichtbeachtung dieser Anweisung kann
Körperverletzung oder Materialschäden
zur Folge haben.
Failure to follow these instructions can result in
serious injury, or equipment damage.
RIESGO DE DAÑOS MATERIALES Y DE
SOBRECALENTAMIENTO DE LA UNIDAD
材料损坏和高温外壳的危险性
RISCHIO DI DANNI MATERIALI E D'INVOLUCRO
CALDO
• 产品的一侧面板可能很热,在其冷却前请
不要触碰。
• 遵照正确的安装说明,包括扭矩值。
• 请勿让液体及其他异物进入本产品。
• Los paneles laterales del producto pueden
estar calientes. Esperar que el producto se
enfríe antes de tocarlo.
• Respetar las instrucciones de montaje, y en
particular los pares de apretado.
• I pannelli laterali dell'apparecchio possono
scottare; lasciar quindi raffreddare il prodotto
prima di toccarlo.
• Seguire le istruzioni di montaggio corrette.
• Non far entrare liquidi o oggetti estranei in questo
apparecchio.
• No dejar que penetren líquidos o cuerpos
extraños en el producto.
La mancata osservanza di questa precauzione può
causare gravi rischi per l'incolumità personale o
danni alle apparecchiature.
如不能正确执行这些操作说明,
极有可能造成严重人体伤害或者设备的损坏。
Si no se respetan estas precauciones pueden
producirse graves lesiones, daños materiales.
Do not forget to visit us at: www.crydom.com
Copyright © 2018 Crydom Inc. Specifications subject to change without notice.
DIN Rail Mount
Datasheet
ANNEX - ENVIRONMENTAL INFORMATION
The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China
Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products.
Part
Name
Toxic or hazardous Substance and Elements
Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
Chromium
(Cr (VI))
Polybrominated
biphenyls
(PBB)
Polybrominated
diphenyl ethers
(PBDE)
Semiconductor die
Solder
附件 - 环保信息
此附件所标示的包括电子信息产品污染图标的环保信息符合中华人民共和国电子行业标准 SJ/T11364 - 2006,
电子信息产品污染控制标识要求。
部件
名称
有毒有害物质或元素
铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(Cr (VI))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
半导体芯片
焊接点
50
Do not forget to visit us at: www.crydom.com
Copyright © 2018 Crydom Inc. Specifications subject to change without notice.
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明