GSB-128 [ETC]

Two-Piece Grounding Connectors for Shielded and Coaxial Cable;


型号：	GSB-128
厂家：	ETC
描述：	Two-Piece Grounding Connectors for Shielded and Coaxial Cable
文件：	总3页 (文件大小：110K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Two-Piece Grounding Connectors for Shielded and Coaxial Cable

A reliable method for grounding,

terminating and insulating shielded and

coaxial cable

Installation Method

1. Slip outer sleeve over insulation

jacket, after stripping. Trim braid to

within 1/2” of insulation.

All-around hex compression is applied

with a simple tool. The result: a

permanent, compression joint. With or

without grounding wire (insertable from

front or back), reliable grounding of

termination is done quickly, neatly, and

accurately.

2. Fan braid by rotating center

conductor and slip inner sleeve under

braid.

The Thomas & Betts hex compression is

a permanent method which has reliably

connected literally hundreds of millions

of installations in communications,

aerospace, electronic, telephone, radio

and TV. The termination is completed

quickly, neatly, accurately … at a greatly

reduced production cost.

3. Position inner sleeve to extend about

1/16” beyond braid.

4. Slip one No. 22 or No. 20 ground wire

under outer sleeve (front or back), and

slide outer sleeve over braid.

For Daisy chain grounding, two

ground wires can be accommodated

by selecting the proper size outer

sleeve.

5. Outer sleeve covers all exposed

strands.

6. Compress in specified tool. (Tool will

not release until full compression

stroke is completed.)

Warning: Never install

on energized wire.

229

Two-Piece Grounding Connectors for Shielded and Coaxial Cable

O.D. Inner Insulation

Connector Inner Sleeve

Cat.

No.

Colour

Code

Military

Spec. No.

I.D.

O.D.

GSB-046

GSB-058

GSB-063

GSB-071

GSB-080

GSB-090

GSB-096

GSB-101

GSB-109

GSB-115

GSB-124

GSB-128

GSB-134

GSB-149

GSB-156

GSB-165

GSB-175

GSB-187

GSB-194

GSB-205

GSB-219

GSB-225

GSB-232

GSB-250

GSB-261

GSB-266

GSB-275

GSB-281

GSB-287

GSB-297

GSB-312

GSB-348

GSB-375

Tin

Yellow

Red

Green

Blue

Orange

Purple

Yellow

Red

Tin

Green

Tin

Orange

Blue

Red

.046

.058

.063

.071

.080

.090

.096

.101

.109

.115

.124

.128

.134

.149

.156

.165

.175

.187

.194

.205

.219

.225

.232

.250

.261

.266

.275

.281

.287

.297

.312

.348

.375

.075

.083

.088

.096

.103

.113

.119

.124

.131

.146

.145

.152

.156

.179

.193

.194

.215

.227

.226

.245

.250

.256

.263

.281

.297

.306

.331

.327

.335

.362

.400

.406

21981-046

21981-058

21981-063

21981-071

21981-080

21981-090

21981-096

21981-101

21981-109

21981-115

21981-124

21981-128

21981-134

21981-149

21981-156

21981-165

21981-175

21981-187

21981-194

21981-205

21981-219

21981-225

21981-232

21981-250

21981-261

21981-266

21981-275

21981-281

21981-287

21981-297

21981-312

21981-348

21981-375

O.D. Inner Insulation

Determine O.D. of inner conductor insulation

with measuring tool.

Inner Sleeve-Cat. GSB

Tin

Green

Yellow

Blue

Orange

Tin

Yellow

Red

Green

Blue

Hard bronze inner sleeve is installed under braid.

Length 5/16”

Tin Plated as standard.

Tin

Orange

Yellow

Tin

Red

Purple

Orange

Blue

Inner sleeve

1. Use a measuring tool over the inner conductor insulation. Rotate wire to pick up high spots on cable that are non-symmetrical.

2. Add .005 to the diameter of the conductor insulation. Select inner sleeve with this I.D. or nearest larger I.D.

230

Two-Piece Grounding Connectors for Shielded and Coaxial Cable

Connector Outer Sleeves

Non-insulated Outer Sleeve-Cat. GSC

Cat.

No.

Colour

Code

Military

Spec. No.

I.D.

O.D.

Non-insulated

GSC-101

GSC-128

GSC-149

GSC-156

GSC-175

GSC-187

GSC-194

GSC-199

GSC-205

GSC-219

GSC-225

GSC-232

GSC-261

GSC-275

GSC-281

GSC-287

GSC-297

GSC-312

GSC-327

GSC-348

GSC-359

GSC-375

GSC-405

GSC-415

GSC-425

GSC-460

GSC-500

Tin

Blue

Purple

Yellow

Blue

Orange

Red

Tin

Yellow

Green

Purple

Orange

Yellow

Tin

Purple

Blue

Green

Yellow

Tin

.101

.128

.149

.156

.175

.187

.194

.199

.205

.219

.225

.232

.261

.275

.281

.287

.297

.312

.327

.348

.359

.375

.405

.415

.425

.460

.500

.124

.152

.179

.193

.215

.227

.226

.235

.245

.250

.256

.263

.297

.306

.331

.327

.335

.362

.372

.393

.399

.406

.453

.463

.475

.510

.550

21980-101

21980-128

21980-149

21980-156

21980-175

21980-187

21980-194

21980-199

21980-205

21980-219

21980-225

21980-232

21980-261

21980-275

21980-281

21980-287

21980-297

21980-312

21980-327

21980-348

21980-359

21980-375

21980-405

21980-415

Soft bronze outer sleeve slips over the braid and

ground wire.

Length ¹/

Insulated Outer Sleeve-Cat. GSR

Soft bronze outer sleeve with nylon insulator

slips over the braid and ground wire.

Orange

Purple

Yellow

Red

Blue

Tin

Green

21980-460

21980-500

Insulated

GSR-101

GSR-128

GSR-149

GSR-156

GSR-175

GSR-187

GSR-194

GSR-199

GSR-205

GSR-219

GSR-225

GSR-232

GSR-261

GSR-275

GSR-281

GSR-287

GSR-297

GSR-312

GSR-327

GSR-348

GSR-359

GSR-375

GSR-405

GSR-415

GSR-460

GSR-500

Tin

Blue

Purple

Yellow

Blue

Orange

Red

Tin

Yellow

Green

Purple

Orange

Yellow

Tin

Purple

Blue

Green

Yellow

Tin

.101

.128

.149

.156

.175

.187

.194

.199

.205

.219

.225

.232

.261

.275

.281

.287

.297

.312

.327

.348

.359

.375

.405

.415

.460

.500

.124

.152

.179

.193

.215

.227

.226

.235

.245

.250

.256

.263

.297

.306

.331

.327

.335

.362

.372

.393

.399

.406

.453

.463

.510

.550

18121-101

18121-128

18121-149

18121-156

18121-175

18121-187

18121-194

18121-199

18121-205

18121-219

18121-225

18121-232

18121-261

18121-275

18121-281

18121-287

18121-297

18121-312

18121-327

18121-348

18121-359

18121-375

18121-405

18121-415

18121-460

18121-500

Orange

Purple

Yellow

Red

Blue

Tin

Green

Outer sleeve

These suffixes are NOT colour-coded. They are not stock

items.

1. Add .060 to O.D. of inner sleeve selected. Use this

dimension to select outer sleeve with this I.D. or the nearest

larger I.D.

Add suffix PF for plain finish.

Add suffix T for tin plate with no colour code.

Add suffix NP for nickel plate.

Consult regional sales office for delivery and minimum

quantities.

2. Use GSC prefix to order non-insulated outer sleeve. Use

GSR prefix to order nylon insulated outer sleeve.

Note: All parts are standard tin plated per MIL-T-10727A

Note: Inner and outer connector catalogue nos. conform to

MIL-F-21608.

231

相关型号：