HEB-1K0201 [ETC]
FUSE HOLDR CART 600V 30A IN LINE;
| 型号： | HEB-1K0201 |
| 厂家： | 
ETC |
| 描述： | FUSE HOLDR CART 600V 30A IN LINE |
| 文件： | 总6页 (文件大小：802K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
BUSSMANN
Effective January 2019
Supersedes April 2017
Technical Data 2127
SERIES
HEB breakaway and non-breakaway
in-line fuse holders for UL 13/32” x 1-1/2”
supplemental fuses
Use these part numbers to order insulating
boots for a non-breakaway HEB holder
Description
Catalog no.
Single conductor
Dual conductor
2A0660
2A0661
Boot reference
Catalog Symbol: HEB*
Description
0.8
(ø20)
The Bussmann™ series of HEB submersible,
single-pole in-line fuse holders for UL 13/32”
x 1-1/2” supplemental fuses. Available in non-
breakaway and breakaway versions with an array
of terminal options to meet application needs.
Breakaway versions come with insulating boots to
provide submersibility per UL IP67. Non-breakaway
versions require ordering optional insulating boots
for submersibility.
4.1
(104)
1.3
(ø33)
4.7
(119)
Installation instructions
Strip wire insulation equal to the depth of the
crimp or screw terminal. Torque screw terminal to
35 lb-In (3.9 N•m) or crimp terminal twice, spacing
crimps a distance of one-third from each end (as
shown below) using an appropriate crimp tool and
die. See page 5 for recommended crimping tools.
Recommended fuses
BAF, FNM, FNQ, KLM and KTK
Ratings
Volts:
600 V
Amps:
up to 30 A limited by conductor size
Crimp terminal twice
at locations 1/3 distance
from each end
Withstand: 200 kA RMS Sym.
Agency information
UL® Recognized, Guide IZLT2, File E14853
CSA® Certified, Class 622501, File 47235
CE, RoHS compliant†
Strip wire insulation
to depth of terminal
Coupling nut torque
Related products:
10-20 lb-In (1.1-2.2 N•m)
Operating and storage temperature
-40°F (-40°C) to 221°F (105°C)
Insulating boots
Catalog
no.
Data
Description
sheet no.
Two-pole supplemental in-line
fuse holder
HEX
HEZ
HEY
HET
NNB
2126
2130
2126
2125
—
One-pole Class CC in-line
fuse holder
Two insulating boots come standard with the
breakaway holder configurations. Insulating boots
are not included as standard with non-breakaway
holders. Two insulating boots must be ordered
separately, if required, for each non-breakaway
holder ordered. When insulating boots are utilized,
extra heat retention requires that fuses are sized
at a minimum of 200% of the RMS load current.
Two-pole Class CC in-line
fuse holder
One-pole in-line, permanently
installed neutral
13/32” x 1-1/2” neutral
dummy link (not a fuse)
*
†
The Bussmann series HEB in-line fuse holders are the legacy
Bussmann TRON™ HEB in-line fuse holders.
See terminal data tables for exceptions.
Technical Data 2127
Effective January 2019
Bussmann series HEB breakaway and non-breakaway
in-line fuse holders for UL 13/32” x 1-1/2” supplemental fuses
Non-breakaway catalog number system
To order:
Specify catalog symbol HEB and the loadside terminal code. Then select a lineside
terminal code that is available with the loadside terminal. Example: HEB-BB defines a
non-breakaway holder with a loadside copper crimp terminal for a single #6 or two #10
wires with a lineside copper crimp terminal for a single #6 or two #10 wires.
HEB - A A
Agency
Info.
Loadside terminal
Terminal type
Cu crimp
Lineside terminal
Ref.
Wire
range*
length
A
Breakaway
equivalent
UL CSA
Terminal type
Cu crimp
Wire range*
#8-16; (2) #12-16
#8-16; (2) #12-16
X
X
X
X
4.4 (112) HEB-AW-RLC-A
4.4 (112) HEB-AW-RLC-B
4.7 (119) HEB-AW-RLC-C
A
B
C
D
J
Sol/Str
Sol/Str
#8-16; (2) #12-16
Cu crimp
Cu crimp
Cu crimp
Cu crimp
Cu crimp
Cu crimp
Cu crimp
Cu crimp
Cu crimp
Cu crimp
Cu crimp
Cu crimp
Cu crimp
Cu crimp
Cu crimp
Cu crimp
Cu crimp
Cu crimp
Cu crimp
Cu crimp
#6; (2) #10
#4; (2) #8
#2; (2) #6
Sol/Str
#8-16; (2) #12-16
X
X
Sol/Str
#8-16; (2) #12-16
X
X
4.7 (119)
—
Sol/Str
#8-16; (2) #12-16
Cu
setscrew
#3-12 Str;
#10-12 Sol
X
X
4.7 (119) HEB-AW-RLC-J
Sol/Str
A
#8-16; (2) #12-16
Cu dual
setscrew
#2-12 Str†;
#10-12 Sol†
X
X
4.8 (122)
4.9 (124)
4.7 (119)
4.4 (112)
4.8 (122)
HEB-AW-RYC
—
K
Sol/Str
#8-16; (2) #12-16
—
—
—
—
X
—
—
—
—
X
Al crimp
#1-2
#2-12
—
R
L
Sol/Str
#8-16; (2) #12-16
Al
HEB-AW-RLA
—
Sol/Str
setscrew
#8-16; (2) #12-16
Cu solid
W
Y
Sol/Str
#8-16; (2) #12-16
Al dual
setscrew
#2-12†
HEB-AW-RYA
Sol/Str
#8-16; (2) #12-16
#6; (2) #10
#6; (2) #10
#6; (2) #10
#6; (2) #10
#6; (2) #10
#4; (2) #8
#2; (2) #6
#18-20
Cu crimp
Cu crimp
Cu crimp
Cu crimp
Cu solid
4.4 (112) HEB-BW-RLC-A
4.4 (112) HEB-BW-RLC-B
A
B
C
D
W
C
D
A
J
Sol/Str
X
X
#6; (2) #10
#4; (2) #8
#2; (2) #6
—
HEB
X
X
4.7 (119)
4.7 (119)
4.4 (112)
5 (127)
—
B
X
X
—
—
X
—
X
—
Cu crimp
Cu crimp
Cu crimp
#4; (2) #8
#2; (2) #6
—
C
D
Z
X
X
5 (127)
—
#8-16; (2) #12-16
—
X
—
X
4.4 (112)
5 (127)
—
Sol/Str
Cu
setscrew
#3-12 Str;
#10-12 Sol
Cu
setscrew
#3-12 Str;
#10-20 Sol
HEB-JW-RLC-J
Cu
#3-12 Str;
#10-12 Sol
Cu dual
#3-12 Str†;
#10-20 Sol†
X
X
5.1 (129)
5 (127)
HEB-JW-RYC
K
setscrew
setscrew
Cu
setscrew
#3-12 Str;
#10-12 Sol
Al
—
—
—
—
—
—
#2-12
—
—
—
—
J
L
setscrew
Cu
setscrew
#3-12 Str;
#10-12 Sol
Cu solid
4.8 (122)
5.1 (129)
W
Y
Cu
setscrew
#3-12 Str;
#10-12 Sol
Al dual
setscrew
#2-12†
* Stranded conductors unless otherwise noted.
† Not dual wire rated. One wire per opening.
Non-breakaway dimensions - in (mm):
A
9.125 (232)
Assembled length
Eaton.com/bussmannseries
2
Bussmann series HEB breakaway and non-breakaway
in-line fuse holders for UL 13/32” x 1-1/2” supplemental fuses
Technical Data 2127
Effective January 2019
Non-breakaway catalog number system
HEB - A A
Agency
Information
Loadside terminal
Terminal type
Lineside terminal
Terminal type
Reference
length
A
Wire
range*
Wire
range*
Breakaway
equivalent
UL
CSA
Al
Al
—
—
#2-12
#2-12
5 (127)
5.4 (137)
5.4 (137)
5.4 (137)
5.4 (137)
5.4 (137)
4.4 (112)
HEB-LW-RLA
L
N
P
L
N
P
setscrew
setscrew
#8 Str;
#6 Sol
#8 Str;
#6 Sol
—
—
—
—
—
—
—
X
Al crimp
Al crimp
Al crimp
Al crimp
Al crimp
Cu solid
Al crimp
Al crimp
Al crimp
Al crimp
Al crimp
Cu solid
—
—
—
—
—
—
#6 Str;
#4 Sol
#6 Str;
#4 Sol
#3-4 Str;
#2 Sol
#3-4 Str;
#2 Sol
HEB
X
Q
R
T
Q
R
T
X
#1-2
1/0
—
#1-2
1/0
—
X
—
W
W
* Stranded conductors unless otherwise noted.
Non-Breakaway terminal data
Conductor data
Conductor data
Terminal type
Al crimp
Terminal type
Cu crimp
#8-16
1
2
•
•
•
•
#8
#6
1
1
—
•
A
B
N
#12-16
•
—
#6
1
2
•
•
•
•
#6
#4
1
1
—
•
P
Q
R
T
#10
•
—
#4
#8
1
2
—
•
•
C††
D††
Z
#3-4
#2
1
1
—
•
•
•
—
#2
#6
1
2
—
•
•
•
#1-2
#1/0
1
1
1
—
—
•
•
•
•
#18-20
1
•
•
Cu setscrew
#3-12
1
1
—
•
•
J
#10-12
•
Al setscrew
Cu dual
setscrew
#2-12
L
#2-12
2†
2†
—
•
•
K
#10-12
•
Al dual
setscrew
#2-12
2†
•
•
Y
Cu solid
—
—
—
—
W
†
Not dual wire rated. One wire per opening.
†† Fuse holder assemblies using this terminal are not RoHS compliant.
Eaton.com/bussmannseries
3
Technical Data 2127
Effective January 2019
Bussmann series HEB breakaway and non-breakaway
in-line fuse holders for UL 13/32” x 1-1/2” supplemental fuses
To order:
Breakaway catalog number system
Specify catalog symbol HEB and the loadside terminal code plus the letter “W.” Then
select a lineside terminal code that is available with the loadside terminal. Example:
HEB-BW-RCL-B defines a breakaway holder with a loadside copper crimp terminal for
a single #6 or two #10 wires with a lineside copper crimp terminal for a single #6 or
two #10 wires.
HEB - A W - RYC
Agency
Info.
Loadside terminal
Lineside terminal
Length
A
(ref.)
Non-
breakaway
equivalent
UL CSA
Terminal type
Wire range* Terminal type
Wire range*
#8-16; (2) #12-16
Cu crimp
#8-16; (2) #12-16
RLC-A
RLC-B
RLC-C
RLC-J
RYC
X
X
Cu crimp
5.8 (147)
5.9 (150)
6.2 (158)
6.2 (158)
6.3 (159)
6.2 (158)
6.3 (159)
HEB-AA
HEB-AB
HEB-AC
HEB-AJ
HEB-AK
HEB-AL
HEB-AY
HEB-BA
HEB-BB
—
Sol/Str
Sol/Str
#8-16; (2) #12-16
Cu crimp
X
X
Cu crimp
Cu crimp
Cu crimp
Cu crimp
Cu crimp
Cu crimp
Cu crimp
Cu crimp
Cu crimp
#6; (2) #10
#4; (2) #8
Sol/Str
#8-16; (2) #12-16
Cu crimp
X
X
Sol/Str
#8-16; (2) #12-16 Cu
#3-12 Str
#10-12 Sol
X
X
A
Sol/Str
setscrew
#8-16; (2) #12-16 Cu dual
#2-12 Str†;
#10-12 Sol†
X
X
Sol/Str setscrew
#8-16; (2) #12-16 Al
RLA
—
—
X
—
—
X
#2-12
Sol/Str
setscrew
#8-16; (2) #12-16 Al dual
RYA
#2-12†
Sol/Str
setscrew
RLC-A
RLC-B
RYC
#6; (2) #10
Cu crimp
Cu crimp
#8-16; (2) #12-16 5.8 (147)
X
X
#6; (2) #10
#6; (2) #10
6#; (2) #10
5.9 (150)
6.3 (159)
6.2 (158)
6.3 (159)
6.2 (158)
6.3 (159)
6.2 (158)
6.2 (158)
6.3 (159)
HEB
B
Cu dual
setscrew
#2-12 Str†;
#10-12 Sol†
X
X
Cu
setscrew
Cu
setscrew
#3-12 Str;
#10-12 Sol
#3-12 Str;
#10-12 Sol
RLC-J
RYC
X
X
HEB-JJ
HEB-JK
—
J
Cu
setscrew
Cu dual
setscrew
#2-12 Str†;
#10-12 Sol†
#3-12 Str;
#10-12 Sol
X
X
Cu dual
setscrew
#2-12 Str†;
#10-12 Sol†
Cu
setscrew
#3-12 Str;
#10-12 Sol
RLC-J
RYC
X
X
K
Cu dual
setscrew
#2-12 Str†;
#10-12 Sol†
Cu dual
setscrew
#2-12 Str†;
#10-12 Sol†
X
X
—
Al
Al
RLA
—
—
—
—
—
—
#2-12
#2-12
#2-12
#2-12
#3-12
#2-12†
HEB-LL
—
setscrew
setscrew
Al
Cu
setscrew
RLC-J
RYA
L
setscrew
Al
Al dual
setscrew
—
setscrew
* Stranded conductors unless otherwise noted.
† Not dual wire rated. One wire per opening.
Dimensions - in (mm):
A
Breakaway
10.375 (263)
Assembled length
4
Eaton.com/bussmannseries
Bussmann series HEB breakaway and non-breakaway
in-line fuse holders for UL 13/32” x 1-1/2” supplemental fuses
Technical Data 2127
Effective January 2019
Breakaway lineside terminal data
Breakaway loadside terminal data
Conductor data
Conductor data
Terminal type
Cu crimp
Terminal type
Cu crimp
#8-16
1
•
•
•
#8-16
1
2
•
•
•
•
-RLC-A
-RLC-B
-RLC-C††
-RLC-J
-RYC
A
B
J
#12-16
2
•
#10-16
#6
1
2
•
•
•
•
#6
1
2
•
•
•
•
#10
#10
#4
#8
1
2
—
•
•
Cu setscrew
•
#3-12
1
1
—
•
#10-12
•
—
Cu setscrew
#3-12
1
1
—
•
Cu dual setscrew
Al setscrew
#10-12
•
—
#2-12
2†
2†
—
•
K
L
Cu dual setscrew
Al setscrew
#10-12
•
—
#2-12
2†
2†
—
•
#10-12
•
—
#2-12
1
•
•
#2-12
#2-12
1
•
•
•
•
-RLA
†
Not dual wire rated. One wire per opening.
Al dual setscrew
†† Fuse holder assemblies using this terminal are not RoHS compliant.
2†
-RYA
Eaton.com/bussmannseries
5
Technical Data 2127
Effective January 2019
Bussmann series HEB breakaway and non-breakaway
in-line fuse holders for UL 13/32” x 1-1/2” supplemental fuses
Recommended crimping tools
A wide variety of crimping tools can be used with the HEB fuse
holders. Some of the commercially available tools are listed in the
table below. This list is not intended to exclude the use of other
crimping tools that can provide similar crimps or indents.
HEB terminal
T & B P/N (Die)
WT-111M (Die C)
A
B
C
Sta-Kon ERG4002 (Die C)
WT-115A (Die D)
TBM5 (Grey Die)
WT-115A (Die E)
TBM5 (Brown Die)
TBM8 (Brown Die)
WT-115A (Die F)
D
WT-111M (Die A)
Z
Sta-Kon ERG4002 (Die A)
TBM8 (Orange Die)
N, P, Q, R, T
The only controlled copy of this data sheet is the electronic read-only version located on the Eaton network drive. All other copies of this document are
by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the
end user with design applications. Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit
distribution of any products. Eaton also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once
a product has been selected, it should be tested by the user in all possible applications.
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
For Eaton’s Bussmann series
Eaton.com
product information,
call 1-855-287-7626 or visit:
Eaton.com/bussmannseries
Bussmann Division
114 Old State Road
Ellisville, MO 63021
United States
Eaton and Bussmann are valuable trademarks
of Eaton in the US and other countries. You
are not permitted to use the Eaton trademarks
without prior written consent of Eaton.
Eaton.com/bussmannseries
CSA is a registered trademark of the Canadian
Standards Group.
Follow us on social media to get the
latest product and support information.
© 2019 Eaton
All Rights Reserved
Printed in USA
Sta-Kon is a registered trademark of Thomas
& Betts.
Publication No. 2127 - BU-SB15154
January 2019
UL is a registered trademark of the
Underwriters Laboratories, Inc.
相关型号：
HEB-AA
HEB breakaway and non-breakaway in-line fuse holders for UL 13/32â x 1-1/2â supplemental fuses
COOPER
HEB-AB
HEB breakaway and non-breakaway in-line fuse holders for UL 13/32â x 1-1/2â supplemental fuses
COOPER
HEB-AC
HEB breakaway and non-breakaway in-line fuse holders for UL 13/32â x 1-1/2â supplemental fuses
COOPER
HEB-AD
HEB breakaway and non-breakaway in-line fuse holders for UL 13/32â x 1-1/2â supplemental fuses
COOPER
HEB-AJ
HEB breakaway and non-breakaway in-line fuse holders for UL 13/32â x 1-1/2â supplemental fuses
COOPER
HEB-AK
HEB breakaway and non-breakaway in-line fuse holders for UL 13/32â x 1-1/2â supplemental fuses
COOPER
HEB-AL
HEB breakaway and non-breakaway in-line fuse holders for UL 13/32â x 1-1/2â supplemental fuses
COOPER
HEB-AR
HEB breakaway and non-breakaway in-line fuse holders for UL 13/32â x 1-1/2â supplemental fuses
COOPER
HEB-AW
HEB breakaway and non-breakaway in-line fuse holders for UL 13/32â x 1-1/2â supplemental fuses
COOPER
HEB-AW-RLA
HEB breakaway and non-breakaway in-line fuse holders for UL 13/32â x 1-1/2â supplemental fuses
COOPER
©2020 ICPDF网 联系我们和版权申明