HGP.0E.650.CTLPV_技术文档

®

COAXIAL, TRIAXIAL,

MULTI & MIXED CONNECTORS

SHORT FORM

CATALOGUE

DISCLAIMER The information contained within this catalog and the functions oﬀered are intended to provide information about products. All reasonable eﬀorts have been made to ensure the accuracy of the

information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.

www.lemo.com

A

®

Precision modular connectors to suit your application

Since its creation in Switzerland in 1946 the LEMO Group has been recognized as a global leader of circular Push-Pull

connectors and connector solutions. Today LEMO and its affiliated companies, REDEL and COELVER, are active in

more than 80 countries with the help of over 40 subsidiaries and distributors.

Over 75000 connectors

The modular design of the LEMO range provides over 75000 connectors from miniature ø 3 mm to ø 50 mm, capable of

handling cable diameters up to 30 mm and for up to 114 contacts.

This vast portfolio enables you to select the ideal connector configuration to suit almost any specific requirement in

most markets, including medical devices, test and measurement instruments, machinery, audio video broadcast, tele-

communications and military.

LEMO’s Push-Pull Self-Latching Connection System

This self-latching system is renowned worldwide for its easy and quick mating and unmating features. It provides absolute

security against vibration, shock or pull on the cable, and facilitates operation in a very limited space.

The LEMO self-latching system allows the connector

to be mated by simply pushing the plug axially into

the socket.

Once firmly latched, connection cannot be broken

by pulling on the cable or any other component part

other than the outer release sleeve.

When required, the connector is disengaged by a

single axial pull on the outer release sleeve.

This first disengages the latches and then withdraws

the plug from the socket.

UL Recognition

LEMO connectors are recognized by the Underwriters Laboratories (UL). The approval of the complete system (LEMO

connector, cable and your equipment) will be easier because LEMO connectors are recognized.

CE marking

means that the appliance or equipment bearing it complies with the protection requirements of one or

several European safety directives. CE marking

applies to complete products or equipment, but not to electrome-

chanical components, such as connectors.

RoHS

LEMO connector speciﬁcations conforms the requirements of the RoHS directive (2011/65/EU) of the European Parliament

and the latest amendments. This directive speciﬁes the restrictions of the use of hazardous substances in electrical and

electronic equipment marketed in Europe.

www.lemo.com

®

Introduction

This catalogue gives the complete description of LEMO connectors with coaxial, triaxial and mixed contacts.

Mixed contacts include coaxial and low voltage contact conﬁgurations, as well as multi-coaxial contact conﬁgurations.

The LEMO manufacturing programme has been extended to almost 40 series divided into 7 product families with speciﬁc

mating and environmental characteristics. Each series includes a wide variety of plug, socket and coupler models, available

in contact conﬁgurations adapted to all round cables. The catalogue includes the B, K, S and E Series of the LEMO product

range. In addition the 00 Series (triaxial) connector is also represented.

Watertight and vacuumtight models are also available. Since LEMO connectors are perfectly screened and designed to

guarantee very low resistance to shell electrical continuity, they are particularly adapted to applications where electromagnetic

compatibility (EMC) is important.

Material and treatment

Surface treatment (µm)

Component

Material (Standard)

Notes

black chr.

chrome

nickel

gold

Cu Ni Cr Cu Ni Cu Ni Au Ni Cr

Brass (UNS C 38500)

0.5

3

0.3 0.5

3

0.5

3

0.5

1

2

Stainless steel (AISI 303, 304 or 316L)

Aluminium alloy (AA 6262A or AA 6023)

POM (Delrin^®or Ertacetal^®), Polyoxymethylene, black

PEEK, Polyether ethercetone, beige

PSU (Udel^®), Polysulfone, grey or white

PPSU (Radel^®), Polyphenylsulfone, cream

PPS (Ryton^®), Polyphenilene sulﬁde, brown

Bronze (UNS C 54400) or special brass

Beryllium Copper (UNS C 17300)

Stainless steel (AISI 416 or 316L)

Special brass

without treatment

anodized

1)

2)

3)

4)

5)

6)

7)

Outer shell, collet nut,

conical nut or notched

nut and oversized collet

–

0.5

3

0.5

3

1.0

–

Earthing crown

without treatment

0.3 0.5 0.5

without treatment

0.5

3

0.5

–

Latch sleeve

7)

Stainless steel (AISI 416 or 316L)

Bronze (UNS C 52100)

Locking washer

–

0.5

3

0.5

3

0.5

–

Brass (UNS C 38500)

8)

Hexagonal or round nut

Stainless steel (AISI 303, 304 or 316L)

Aluminium alloy (AA 6262A or AA 6023)

Brass (UNS C 38500)

without treatment

anodized natural

–

0.5

3

0.5

3

0.5

–

Other metallic components

Stainless steel (AISI 303, 304 or 316L)

Silicone MQ/MVQ or FPM/FKM (Viton^®)

Epoxy (Araldite^®or Stycast^®)

without treatment

9)

O-ring and gaskets

–

Sealing resin

Notes:

³⁾for the FGG, FGY and ENY models of the 2B to 4B series

⁴⁾for 00 triaxial series (elbow sockets for printed circuits)

⁵⁾gold-plating for unipole types

standards for surface treatment are as follows:

– chrome-plated: SAE AMS 2460

– nickel-plated: SAE AMS QQ N 290, or MIL DTL 32119

– gold-plated: ISO 27874

⁶⁾used in 00 series free and ﬁxed sockets

⁷⁾AISI 416 steel is used with shells made of AISI 303 or 304

– black chrome: MIL-C-14538C with a minimum of 10 µm of lacquer

protection

⁸⁾delivered with free and ﬁxed sockets with aluminium alloy or stainless

steel shell

¹⁾for FFP, PCP and ERN models of the 0S to 3S series

²⁾for FFP, PCP and ERN models of the 0S to 3S series, FGG and ENG

models of the 0B, 1B, 3B and 4B series, FFA and FFC models of the

00 triaxial series

⁹⁾FPM/FKM (Viton^®) o-ring and gaskets are installed upon special

request. However standard for vacuumtight models.

www.lemo.com

1

®

B Series

B series connectors provide the following main features:

– security of the Push-Pull self-latching system

– coaxial, triaxial and mixed contact conﬁgurations

– plastic models made of PSU or PPSU

– multiple key options to avoid cross mating

of similar connectors («G» key standard).

– up to 10 coaxial contacts

– solder or crimp contacts

– high packing density for space savings

– 360° screening for full EMC shielding

Metal housing models

Fixed plugs

Straight plugs

Fixed sockets

Free sockets

FGG

FFG

FNG

FEG

FDG

FIG

FWG

PHG

EGG

EJG

FAG

ENG

EKG

EHG

EEG

ECG

Elbow plugs

PNG

Fixed sockets

FHG

FKG

PKG

PFG

PEG

Plastic housing models

Straight plugs

Fixed sockets

FGG

FGY

FGG

FGY

ENG

ENY

Model Description

ECG Fixed socket with two nuts, key (G) or keys

(A…L and R) (back panel mounting)

EEG Fixed socket, nut ﬁxing, key (G) or keys

(A…L and R) (back panel mounting)

EGG Fixed socket, nut ﬁxing, key (G)

or keys (A…L and R)

FEG Straight plug, key (G) or keys (A…L), cable

collet, front seal and nut for ﬁtting a bend

relief (IP 54 protection index when mated)

FFG Straight plug, non-latching, key (G)

or keys (A…L), cable collet

FKG Elbow (90°) plug for remote handling,

key (G) or keys (A…L), special alignment

mark, knurled handling surface,

cable collet

FNG Straight plug, key (G) or keys (A…L and R),

cable collet and lanyard release

FWG Fixed plug, nut ﬁxing, key (G) or keys

(A…L)

PEG Fixed socket, nut ﬁxing, key (G) or keys

(A…L), cable collet (back panel mounting)

PFG Fixed socket, with two nuts, key (G)

or keys (A…L and R), cable collet

(back panel mounting)

PHG Free socket, key (G) or keys (A…L and R),

cable collet

PHG Free socket, key (G) or keys (A…L),

cable collet and nut for ﬁtting a bend relief

PKG Fixed socket, nut ﬁxing, key (G)

or keys (A…L and R), cable collet

PNG Free socket, nut ﬁxing, key (G) or keys

(A…L and R), cable collet with lanyard

release

FGG Straight plug, key (G) or keys (A…L and R),

cable collet

EHG Fixed socket, nut ﬁxing, key (G) or keys

(A…L and R), and protruding shell

EJG Fixed socket, press or adhesive ﬁt,

key (G) or keys (A…L)

FGG Straight plug, key (G) or keys (A…L),

cable collet and nut for ﬁtting a bend relief

FGG Straight plug, key (G or J), cable collet,

PEEK outer shell

FGG Straight plug, key (G or J), cable collet,

PEEK outer shell, nut for ﬁtting a bend relief

FGY Straight plug, keys (Y), cable collet

and PSU or PPSU outer shell

FGY Straight plug, keys (Y), cable collet

and PSU or PPSU outer shell and nut

for ﬁtting a bend relief

FHG Elbow (90°) plug, key (G) or keys

(A…L and R), cable collet

FIG Straight plug for remote handling, key (G)

or keys (A…L and R), special alignment

mark, knurled handling surface, cable collet

EKG Fixed socket, nut ﬁxing, key (G) or keys

(A…L and R), special alignment mark

on the front

ENG Fixed socket with earthing tag, nut ﬁxing,

key (G) or keys (A…L)

ENG Fixed socket with earthing tag, nut ﬁxing,

key (G or J), PEEK outer shell

ENY Fixed socket with earthing tag, nut ﬁxing,

keys (Y), PSU or PPSU outer shell

FAG Fixed plug, non-latching, nut ﬁxing,

key (G) or keys (A…L and R)

FDG Straight plug, long version,

key (G) or keys (A…L), cable collet

2

www.lemo.com

®

Part Numbering System

Plug

F G G 3 B 8 4 4 C L A D 1 1

1

Free socket

P H G 3 B 8 4 4 C L L D 1 1

Cable group

Z = collet nut for bend relief

(page 9)

Variant:

Cable ø max. ¹⁾

Collet type: D or M

Fixed socket

E G G 3 B 8 4 4 C L L

1

Cable group

Contact type:

A = male solder

C = male crimp

L = female solder

M = female crimp

Model

Alignment key: G

Series

Insulator: L = PEEK

Housing:

C = brass chrome-plated

P = PSU

Insert configuration:

multi coax, coax + LV

FGG.3B.844.CLAD111 = straight plug with key (G) and cable collet, 3B series, mixed coax & low voltage type (1 coax and 4 low volt-

age contacts), outer shell in chrome-plated brass, PEEK insulator, male solder contacts, D type collet for up to 11 mm diameter cable.

Cable group 1.

PHG.3B.844.CLLD111 = free socket with key (G) and cable collet, 3B series, mixed coax & low voltage type (1 coax and 4 low voltage

contacts), outer shell in chrome-plated brass, PEEK insulator, female solder contacts, D type collet for up to 11 mm diameter cable.

Cable group 1.

EGG.3B.844.CLL1= ﬁxed socket, nut ﬁxing, with key (G), 3B series, mixed coax & low voltage type (1 coax and 4 low voltage contacts),

outer shell in chrome plated brass, PEEK insulator, female solder contacts. Cable group 1.

Note: ¹⁾see unipole-multipole catalogue.

Part Section Showing Internal Components (mixed coax + LV)

Fixed socket

Straight plug

8

7

6

2

3

4

5

1

8

6

5

4

2

7

3

outer shell

1

2

3

4

5

6

7

8

outer shell

1

2

3

4

5

6

7

8

earthing crown

retaining ring

hexagonal nut

locking washer

insulator

latch sleeve

collet nut

split insert carrier

insulator

male contact

collet

female contact

male coaxial contact

female coaxial contact

www.lemo.com

3

®

K Series

K series connectors have been speciﬁcally designed for outdoor applications.

They include an inner sleeve and two seals to prevent penetration of solids or liquids into the housing formed by the plug,

free socket or ﬁxed socket. All models of this series are watertight when mated to give a protection index of IP68 as per

IEC 60529 standard (in mated condition) when correctly assembled to an appropriate cable (IP66 otherwise).

K series connectors have the same insulators as the B series and have the following main features:

– security of the Push-Pull latching system

– coaxial, triaxial and mixed contact conﬁgurations

– solder or crimp contacts

– multiple key options to avoid cross mating

of similar connectors («G» key standard)

– watertight connection (IP 68/IP 66)

– up to 10 coaxial contacts

– 360° screening for full EMC shielding

– high packing density for space savings

– rugged housing for extreme working conditions.

Models

Fixed plugs

Straight plugs

Fixed sockets

Free sockets

Fixed sockets

FGG

PHG

PKG

EGG

FXG

FAG

FGG

PHG

EEG

EBG

PEG

Elbow plug

FHG

EDG

EHG

Model Description

EBG Fixed socket with square ﬂange,

key (G) or keys (A to F, L and R)

and screw ﬁxing

FGG Straight plug, key (G) or keys

(A to F, L and R), cable collet

PHG Free socket, key (G) or keys (A to F, L and

R), cable collet

FGG Straight plug, key (G) or keys (A to F, L

and R), cable collet and oversize cable

collet

PHG Free socket, key (G) or keys (A to F, L and

R), cable collet and oversize cable collet

PHG Free socket, key (G) or keys (A to F, L and

R), cable collet and nut for ﬁtting a bend

relief

EDG Fixed socket with square ﬂange, key (G)

or keys (A to F, L and R), protruding shell

and earthing tag, screw ﬁxing

FGG Straight plug, key (G) or keys (A to F, L

and R), cable collet and nut for ﬁtting a

bend relief

FHG Elbow (90°) plug, key (G) or keys (A to F,

L and R), cable collet

FXG Fixed plug with round ﬂange, key (G)

or keys (A to F, L and R) and screw ﬁxing

PEG Fixed socket, nut ﬁxing, key (G)

or keys (A to F, L and R), cable collet

(back panel mounting)

EEG Fixed socket, nut ﬁxing, key (G)

or keys (A to F, L and R)

PKG Fixed socket, nut ﬁxing, key (G)

or keys (A to F, L and R), cable collet

(back panel mounting)

EGG Fixed socket, nut ﬁxing, key (G)

or keys (A to F, L and R)

EHG Fixed socket, nut ﬁxing, key (G)

or keys (A to F and L), protruding shell

FAG Fixed plug, nut ﬁxing, non-latching,

key (G) or keys (A to F, L and R)

4

www.lemo.com

®

Part Numbering System

Plug

F G G 3 K 8 4 4 C L A C 1 1

3

P H G 3 K 8 4 4 C L L C 1 1

Free socket

Cable group

Z = collet nut for bend relief

(page 9)

Variant:

Cable ø max. ¹⁾

Collet type: C or K

Fixed socket

E G G 3 K 8 4 4 C L L

1

Cable group

Contact type:

A = male solder

C = male crimp

L = female solder

M = female crimp

Model

Alignment key: G

Series

Insulator: L = PEEK

Housing:

C = brass chrome-plated

Insert conﬁguration:

multi coax, coax + LV

FGG.3K.844.CLAC113 = straight plug with key (G) and cable collet, 3K series, mixed coax & low voltage type (1 coax and 4 low voltage

contacts), outer shell in chrome-plated brass, PEEK insulator, male solder contacts, C type collet for 10.5 mm diameter cable. Cable

group 3.

PHG.3K.844.CLLC113 = free socket with key (G) and cable collet, 3K series, mixed coax & low voltage type (1 coax and 4 low voltage

contacts), outer shell in chrome-plated brass, PEEK insulator, female solder contacts, C type collet for 10.5 mm diameter cable. Cable

group 3.

EGG.3K.844.CLL1 = ﬁxed socket, nut ﬁxing, with key (G), 3K series, mixed coax & low voltage type (1 coax and 4 low voltage contacts),

outer shell in chrome-plated brass, PEEK insulator, female solder contacts. Cable group 1.

Note: ¹⁾see unipole-multipole catalogue.

Part Section Showing Internal Components (mixed coax + LV)

Straight plug

1

2

outer shell

latch sleeve

inner shell

Fixed socket

3

outer shell

8

2

3

7

6

4

1

9

8

5

2

3

4

7

1

6

13

11 12

10

5

1

2

3

4

5

6

7

8

4

retaining ring

collet nut

earthing crown

retaining ring

hexagonal nut

insulator

5

6

split insert carrier

insulator

7

8

male contact

earthing cone

collet

female contact

o-ring

9

10

11

12

13

female coaxial contact

gasket

washer

male coaxial contact

www.lemo.com

5

®

Insert conﬁguration (B and K series)

Mixed: multi coax, coax + LV

Coax

Low voltage (LV)

Coax

Contacts

type

1B

1K

801

1

50

F

2

1

0.9

l

0.85 1.20

10

803

802

804

806

810

841

232

243

803

1

2

3

1

50

3

2

4

6

0.9

0.7

1.6

–

l

–

0.75 1.05

0.85 1.20

0.75 1.05

0.95 1.35

1.90 2.70

10

7

A1 1-2-3

l

2B

2K

lꢀ

–

7

C

E

1-2-3 10

7

2

–

2

6

1

–

3

17

–

G

–

E

–

3B

3K

A0

0.9

lꢀ

–

1.10 1.55

1.00 1.50

0.80 1.10

0.90 1.30

0.70 1.00

0.90 1.30

0.75 1.05

0.70 1.00

8

806

809

812

813

822

844

846

850

856

242

243

862

1

2

3

50

A1 1-2-3

6

9

0.7

0.9

0.7

0.9

0.7

–

lꢀ

–

l

–

7

A1 1-2-3 12

A1 1-2-3 13

5

7

C

1-2-3 22

5

1-2-3

4

6

10

8

1-2-3 10

1-2-3 16

7

1-2-3

–

2

–

B

R

–

G

0.9

lꢀ

l

1.10 1.60

9

l First choice alternative

Special order alternative

6

www.lemo.com

®

Mixed: multi coax, coax + LV

Coax

Low voltage (LV)

Coax

Contacts

type

50

A

5-6

802

822

4B

4K

1

2

3

4

6

2

4

6

2

4

0.9

0.7

–

l

–

1.00 1.40

1.70 2.40

0.90 1.30

0.80 1.10

12

10

12

10

8

75

4 to 6

A

5-6

4 to 6

804

824

50

75

lꢀ

–

806

826

A

5-6

4 to 6

50

75

842

844

852

856

858

866

885

244

879

890

894

50

A1 1-2-3

C

E

1-2-3 12

1-2-3 16

1-2-3 18

8

7

1-2-3

6

7

1-2-3 12

8

1-2-3

2

–

9

–

0.7

lꢀ

l

0.90 1.30

8

18

22

5

2

4

5B

5K

1

75

50

A4

N/A

5-6

32

40

1.3

0.9

lꢀ

l

1.20 1.70

8

7

997¹⁾

A

1.30 1.80

840

l First choice alternative

Special order alternative

Note: ¹⁾only available in 5B series. Solution for triaxial cable ﬁxing.

www.lemo.com

7

®

Mixed: multi coax, coax + LV

Coax

Low voltage (LV)

Coax

Contacts

type

5B

5K

868

878

50

B

6

4

3.0

0.9

35

6

1

2

lꢀ

l

0.80 1.15

1.40 2.00

75

3-5

44

850

870

50

75

B

6

3-5

10

16

0.9

8

7

50

75

B

6

3-5

856

876

2

50

75

B

6

3-5

2

15

2.0

0.9

lꢀ

l

lꢀ

l

1.40 2.00

30

7

857

877

2

C

1

864

273

2

75

50

B0

B1

D

1-6

24

–

1.3

l

–

l

–

0.90 1.30

8

–

7

–

C

2

3

5

–

274

892

4

5

–

6

5-8-9 10

0.9

l

–

l

–

0.70 1.00

260

240

7

D

5-8-9

1-2-3

–

10

C

–

l First choice alternative

Special order alternative

8

www.lemo.com

®

Mixed: coax + LV + HV, coax + LV + Fluidic, coax + LV + Fibre optic

Low volt. High volt. Fibre optic

(LV) (HV) (FO)

Fluidic

(FL)

Coax

2B

2K

932

1

50 2.0

C

1

2 ¹⁾0.7 1 ²⁾0.7

–

3B

3K

934

970

986

1

50 2.0

C

1

4

0.9

0.7

1

–

0.9

–

1

–

1

–

10

16

1.3

–

F2

Note: ¹⁾Test voltage LV contact-shell 1.9 (kV rms). ²⁾Test voltage HV contact-shell 7.5 (kV rms). Total rated current for 2B.932 conﬁguration 6 (A).

Collet nut for ﬁtting a bend relief (B and K series)

D type collets for B series

C type collets for K series

Coax cable groupe

Clamping

Coax cable groupe

Clamping

1

2

3

1

2

3

D52Z

D62Z

D92Z

D10Z

D11Z

D12Z

D51Z

D61Z

D91Z

D01Z

D11Z

D21Z

D52Z

D62Z

D92Z

D02Z

D12Z

D22Z

D53Z

D63Z

D93Z

D03Z

D13Z

D23Z

C50Z

C55Z

C80Z

C85Z

C90Z

C95Z

C10Z

C11Z

C12Z

C13Z

C14Z

C51Z

C56Z

C81Z

C86Z

C91Z

C96Z

C01Z

C11Z

C21Z

C31Z

C41Z

C52Z

C57Z

C82Z

C87Z

C92Z

C97Z

C02Z

C12Z

C22Z

C32Z

C42Z

C53Z

C58Z

C83Z

C88Z

C93Z

C98Z

C03Z

C13Z

C23Z

C33Z

C43Z

B

K

Note: see unipole-multipole catalogue for others available collets.

www.lemo.com

9

®

Coaxial contacts for B and K series

Sheath ø

1.05

F ^{1) 3)}

A1

50

75

50

75

50

0.5

0.7

0.6

0.5

1.6

1.3

0.9

0.6

0.5

1.3

solder

crimp

solder

crimp

solder

crimp

collet

crimp

collet

crimp

solder

crimp

collet

2

0.35

1.05

–

2.10

0.8

0.9

1.6

0.8

1.8

2.4

0.8

2.1

1.0

0.4

3.0

2

5

+1.83f

1

2

3

0.60

1.90

2.5

1.7

2.2

3.00

2.10

2.60

1.01

+0.127f

1

2

3

0.50 0.58

0.28 0.35

1.65

1.05

1.65

3.00

2.35

3.00

1.04

+0.1f

C¹⁾

–

2

1.02

+0.93f

E ^{1) 3)}

2

0.35

0.95

2.00

2

5

6

1.35

3.95

4.3

5.3

5.10

6.10

1.01

+0.146f

12

7

A

4

5

6

1.05

3.95

3.8

4.3

5.3

4.60

5.10

6.10

1.01

+0.19f

1.01

+0.19f

A4⁴⁾

none

6

1.05

3.95

3.75

6.7

–

7.60

6.25

4.25

6.25

7

1.06

+0.156f

11

6

B¹⁾

3

5

0.80

2.45

3.75

1.00

+0.22f

–

0.75

2.95

3.75

1.00

+0.22f

1

6

–

6

B0

B1¹⁾

D¹⁾

1.00

+0.22f

5

0.55 0.80

3.75

–

6

5

8

9

0.75

3.75

2.45

3.00

5.40

3.90

4.90

1.00

+0.38f

–

5

1.01

+0.73f

G³⁾

1

6

0.35

0.95

1.65

–

3.00

4.10

2

1.02

A0

3.3

12

+0.3f ²⁾

Note:

¹⁾These contacts require speciﬁc tools for assembly on the cable, see page 11.

²⁾Frequency range with SWR ≤ 1.2 = 0 - 1.5 GHz.

³⁾Coax contact design differs, the central pin is reverse gender.

⁴⁾Only available in 5B series. Solution for triaxial cable ﬁxing.

10

www.lemo.com

®

Recommended coaxial cables for mixed coax, multi coax for B and K Series

LEMO cable

Part Number

LEMO

cableꢀgroupꢀ

Impedance Conductor

Dielectric

øꢀ(mm)ꢀ

Screen

øꢀ(mm)ꢀ

Sheath

øꢀ(mm)

Type

ꢀ

(Ω)ꢀ

øꢀ(mm)ꢀ

RGꢀ6ꢀA/Uꢀ

7ꢀ

9ꢀ

6ꢀ

5ꢀ

1ꢀ

2ꢀ

3ꢀ

4ꢀ

2ꢀ

1ꢀ

75ꢀ±ꢀ3ꢀ

75ꢀ±ꢀ2ꢀ

50ꢀ±ꢀ2ꢀ

75ꢀ±ꢀ3ꢀ

50ꢀ±ꢀ2ꢀ

75ꢀ±ꢀ3ꢀ

95ꢀ±ꢀ5ꢀ¹⁾ꢀ

75ꢀ±ꢀ3ꢀ

50ꢀ±ꢀ2ꢀ

0.73ꢀ

1.17ꢀ

0.90ꢀ

0.60ꢀ

0.48ꢀ

0.30ꢀ

0.54ꢀ

0.30ꢀ

0.60ꢀ

4.70ꢀ

7.25ꢀ

2.95ꢀ

3.70ꢀ

1.50ꢀ

0.84ꢀ

1.50ꢀ

2.60ꢀ

1.50ꢀ

0.84ꢀ

1.60ꢀ

6.20ꢀ

8.15ꢀ

3.60ꢀ

4.50ꢀ

2.00ꢀ

1.30ꢀ

2.00ꢀ

3.10ꢀ

2.00ꢀ

1.30ꢀ

2.10ꢀ

8.45

10.10

5.00

6.20

2.80

1.80

2.50

3.60

2.60

1.95

2.80

311 100 LEDE

RGꢀ11ꢀA/Uꢀ

RGꢀ58ꢀC/Uꢀ

RGꢀ59ꢀB/Uꢀ

RGꢀ174ꢀA/Uꢀ

RGꢀ178ꢀB/Uꢀ

RGꢀ179ꢀB/Uꢀ

RGꢀ180ꢀB/Uꢀ

RGꢀ187ꢀA/Uꢀ

RGꢀ188ꢀA/Uꢀ

RGꢀ196ꢀA/Uꢀ

RGꢀ316ꢀ/Uꢀ

CCX.50.RG5.8CU50N

CCX.50.RG5.9BU62N

CCX.50.RG1.74AU27N

CCX.50.RG1.78BU18M

CCX.75.RG1.79BU26M

CCX.75.RG1.87AU26B

CCX.50.RG1.88AU26B

CCX.50.RG1.96AU20B

CCX.50.RG3.16U26M

Note: ¹⁾ꢀwhenꢀnoꢀdeﬁnedꢀimpedanceꢀisꢀrequired.

Theꢀcableꢀgroupꢀnumberꢀcorrespondingꢀtoꢀtheꢀchosenꢀcableꢀmustꢀbeꢀwrittenꢀinꢀtheꢀvariantꢀposition,ꢀseeꢀpagesꢀ3ꢀandꢀ5.

Tooling for coaxial contacts of B and K series

Reference

ꢀ

Coaxialꢀ

contactꢀtypeꢀ

Imp.ꢀ

Ωꢀ

Cable

group

Spanner for

tightening the contact

Crimping tool with die

Extractor

F

C¹⁾

E

50

75

2

1-3

2

DPE.99.025.45K

DPE.99.103.8K

DPE.99.103.1K

DPE.99.002.5K

DPE.99.176.2K

DPE.99.125.2K

DPE.99.127.0K

DPE.99.006.2K

DPE.99.005.2K

DPE.99.005.5K

DCC.91.019.1AK

–

DCC.91.384.5LA

–

DCC.91.384.5LA

2

DCC.91.050.2LA

–

6

–

DCC.91.804.5LA

B

B1

D

3

–

DCC.91.804.5LA

5

–

DCC.91.804.5LA

5

–

DCC.91.808.0LC

5

DCB.91.685.8TN

–

8

9

Note: ¹⁾ꢀforꢀtheꢀ3B.243/3K.243ꢀandꢀ3B.862/3K.862ꢀtheꢀextractorꢀisꢀpartꢀnumberꢀDCC.91.393.4LT.

www.lemo.com

11

®

00.650 Series

The 00 Series are available in triax conﬁguration, allowing a very compact solution for triaxial cables.

These connectors are designed for small diameter ranging from 1.1 to 3.5 mm.

Either twinax (2 shielded connectors) or triax (1 conductor and 2 concentric separate screens) can be used with the 00 Series.

The 00 Series with a 650 conﬁguration insert are mostly used in audio-video applications where a large density of connection

is required.

LEMO 00 Series connectors offer customers many beneﬁts including:

– self-latching push-pull system

– aesthetically pleasing appearance

– small size

– ease of use

– low weight

– reliable performances

– wide choice to suit application

– high packing density

– rugged construction.

Metal housing models

Elbow plug

Straight plugs

Fixed and free sockets

Free socket

FLA

FFC

PCA

ERN

ECP

ERX

ERC

ELF

EPA

Elbow socket

Fixed socket

FFC

FFY

FAA

FAR

EPL

PSA

Plastic housing model

Threaded latching models

Straight plug

Fixed socket

FFC

FVN

ELF

Model Description

ECP Fixed socket with 2 round nuts

ERN Fixed socket with nut ﬁxing and tags

ERX Fixed socket with nut ﬁxing,

slots on ﬂange and tags

FFC Straight plug with ﬂats on latch sleeve and

cable collet, black POM (Delrin® outershell)

FFY Straight plug, large shell with cable collet

FLA Elbow socket (90°) with cable collet

FVN Straight plug with cable collet,

(back panel mounting)

ELF Fixed socket, nut ﬁxing, threaded shell

with tag (back panel mounting)

FAA Straight plug non latching with nut

FAR Straight plug non latching with 2 nuts

(back panel mounting)

ELF Fixed socket, nut ﬁxing, threaded shell

with tag, black chromium-plated outer shell

(back panel mounting)

black chromium-plated outer shell

FFC Straight plug with ﬂats on latch sleeve

and cable collet

FFC Straight plug with ﬂats on latch sleeve

and cable collet and nut for ﬁtting

a bend relief

PCA Free socket with cable collet

PSA Fixed socket, nut ﬁxing, cable collet

EPA Straight socket for printed circuit board

EPL Elbow plug (90°) for printed circuit board

ERC Fixed socket, with thread, with slots

in ﬂange

Part Section Showing Internal Components

Straight plug

Fixed socket

4

3

7

6

3

4

5

2

1

7

6

2

5

8

1

2

3

4

5

6

7

8

outer shell

1

2

3

4

5

6

7

outer shell

latch sleeve

collet nut

earthing crown

retaining ring

hexagonal nut

locking washer

insulator

earthing sleeve

rear insulator

insulator

male triaxial contact

collet

female triaxial contact

12

www.lemo.com

®

Part Numbering System

Plug

F F C 0 0 6 5 0 C L A C 2 7

P C A 0 0 6 5 0 C L L C 2 7

Free socket

Z

Variant

Cable ø max.:

from 1.1 to 3.5 mm

Collet type:

C = with cable collet clamping

Contact type:

A = male solder

L = female solder

E R N 0 0 6 5 0 C L L

Fixed socket

Model

Series: 00

Variant

Insert conﬁguration:

650 = triaxial (50 Ω)

Contact type:

A = male solder

D = male print

L = female solder

N = female print

Housing :

N = brass nickel-plated ³⁾

C = brass chrome-plated ^{3) 1)}

K = brass black chrome ¹⁾

B = black POM ²⁾

Insulator: L = PEEK

G = PEEK (natural)

FFC.00.650.CLAC27 = straight plug with ﬂats on latch sleeve and cable collet, 00 Series, triaxial (50 Ω), outer shell in chrome-plated

brass, PEEK insulator, C type collet for an up to 2.6 mm diameter cable.

PCA.00.650.CLLC27Z = free socket with cable collet, 00 Series, triaxial (50 Ω), outer shell in chrome-plated brass, PEEK insulator, C

type collet for an up to 2.6 mm diameter cable and nut for ﬁtting a bend relief.

ERN.00.650.CLL = ﬁxed socket with nut ﬁxing and tags, 00 Series, triaxial (50 Ω), outer shell in chrome-plated brass, PEEK insulator.

Note: ¹⁾treatment not available for the printed circuit models. ²⁾available for the FFC model only. ³⁾standard.

Insert conﬁguration

Series

1.02

+0.9f

1)

650

00

–

50

0.5

0.55 2.9 3.5

0.6

4

Note: ¹⁾00.650 is designed for use with 2 conductors screened cable (twinax).

www.lemo.com

13

®

S Series

S series connectors have main features as follows:

– security of the Push-Pull self-latching system

– solder contacts, print contacts only for coaxial

and triaxial conﬁgurations

– coaxial, triaxial and mixed contact conﬁgurations

– polarisation by stepped insert (half-moon)

– up to 8 coaxial contacts

– 360° screening for full EMC shielding.

Metal housing models

Straight plug

Straight plugs

Fixed sockets

Free sockets

Fixed sockets

FZP

EBS

FFA, FFP

FFA

PSA, PSP

PSS

ERA

ERN

PCA, PCP

PCA

Fixed plug

EBC

FAA

Straight plug

with resistor

FFA, FFP

FFB

ERD

ECP

ERC

EHP

PCA

Elbow plug

with socket

Free coupler

FRT

Elbow plugs

RMA

FTR

FFE

FFF

Fixed coupler

JLM

FLC

EBD

RAD

FLS

FFS

Plastic housing models

Watertight or vacuumtight models

Straight plugs

Fixed socket

Fixed sockets

Fixed coupler

FFP

FFA, FFP

FFL

HGP

EWB

HGW

ERN

SWH

HCP

Model Description

EBC Fixed socket with square ﬂange,

protruding shell and screw ﬁxing

PEEK or POM outer shell

cable collet and inner anti-rotating device

HCP Fixed socket, nut ﬁxing, watertight

or vacuumtight (back panel mounting)

HGP Fixed socket, nut ﬁxing, watertight

or vacuumtight

FFB Straight plug, cable collet

EBD Fixed socket with square ﬂange, screw

ﬁxing

and safety locking ring

FFE Straight plug, cable collet, front seal

and nut for ﬁtting a bend relief

EBS Fixed socket with round ﬂange, screw ﬁxing

ECP Fixed socket with two nuts, long threaded

shell (back panel mounting)

(protected to IP54 when mated)

FFF Straight plug, non-latching,

cable collet

HGW Fixed socket, nut ﬁxing, with back washer,

watertight or vacuumtight

EHP Fixed socket, nut ﬁxing, protruding shell

ERA Fixed socket, nut ﬁxing

JLM Elbow (90°) plug, cable collet

PCA Free socket, cable collet

FFP Straight plug, cable collet

ERC Fixed socket, nut ﬁxing, slot in the ﬂange

ERD Fixed socket with two nuts

and inner anti-rotating device

PCA Free socket with oversize cable collet

PCA Free socket, cable collet and nut for ﬁtting

a bend relief

FFP Straight plug, cable collet, PEEK or POM

outer shell and inner anti-rotating device

FFP Straight plug, cable collet, PEEK or POM

outer shell, inner anti-rotating device

and nut for ﬁtting a bend relief

(back panel mounting)

ERN Fixed socket, nut ﬁxing, with earthing tag

ERN Fixed socket, nut ﬁxing, with earthing tag,

PEEK or POM outer shell

PCP Free socket, cable collet and inner

anti-rotating device

PSA Fixed socket, nut ﬁxing, cable collet

PSP Fixed socket, nut ﬁxing, cable collet

and inner anti-rotating device

EWB Fixed socket, nut ﬁxing, with two ﬂats

on the ﬂange, watertight or vacuumtight

FAA Fixed plug non-latching, nut ﬁxing

FFA Straight plug, cable collet

FFS Straight plug for cable crimping

FLC Elbow (90°) plug, cable collet

and nut for ﬁtting a bend relief

FLS Elbow (90°) plug for cable crimping

FRT Straight plug with resistor

FTR Elbow (90°) plug with socket

FZP Straight plug for remote handling,

PSS Free socket, nut ﬁxing for cable crimping

RAD Fixed coupler, nut ﬁxing

FFA Straight plug with oversize cable collet

FFA Straight plug, cable collet

RMA Free coupler

SWH Fixed coupler, nut ﬁxing, watertight

or vacuumtight

and nut for ﬁtting a bend relief

FFA Straight plug, cable collet,

14

www.lemo.com

®

Part Numbering System

F F A 1 S 2 5 0 C T A C 4 2

P C A 1 S 2 5 0 C T L C 4 2 Z

Plug

Free socket

Variant: ¹⁾(page 27)

Cable ø max. ²⁾

Collet type: C, K or L

Fixed socket

E R A 1 S 2 5 0 C T L

Variant ¹⁾

Contact type:

A = male solder

C = male crimp

L = female solder

M = female crimp

Insulator:

L = PEEK

T = PTFE

Model

Series

Housing:

Insert conﬁguration:

coaxial, triaxial,

multi coax, coax + LV

C = brass chrome-plated

N = brass nickel-plated

B = POM (black)

FFA.1S.250.CTAC42 = straight plug with cable collet, 1S series, coaxial (50 Ω), outer shell in chrome-plated brass, PTFE insulator, male

solder contact, C type collet for a 4.2 mm diameter cable.

PCA.1S.250.CTLC42Z = free socket with cable collet, 1S series, coaxial (50 Ω), outer shell in chrome-plated brass, PTFE insulator,

female solder contact, C type collet for a 4.2 mm diameter cable and nut for ﬁtting a bend relief.

ERA.1S.250.CTL = ﬁxed socket, nut ﬁxing, 1S series, coaxial (50 Ω), outer shell in chrome-plated brass, PTFE insulator, female solder

contact.

Note: ¹⁾for mixed contacts, add cable group to the part number.

²⁾see unipole-multipole catalogue.

Part Section Showing Internal Components (mixed coax + LV)

Fixed socket

Straight plug

8

7

6

2

3

4

5

1

6

5

4

2

7

3

outer shell

1

2

3

4

5

6

7

8

outer shell

latch sleeve

collet nut

1

2

3

4

5

6

7

earthing crown

retaining ring

hexagonal nut

locking washer

insulator

centre-piece

insulator

female coaxial contact

collet

male coaxial contact

female contact

www.lemo.com

15

®

E Series

E series connectors have been speciﬁcally designed for outdoor applications.

They include an inner sleeve and two seals to prevent penetration of solids or liquids into the housing formed by the plug,

free socket or ﬁxed socket. All models of these series are watertight when mated and give a protection index of IP 68 as

per IEC 60529 standard (in mated condition) when correctly assembled to an appropriate cable (IP 66 otherwise).

– security of the Push-Pull latching system

– watertight connection (IP 68/IP 66)

– solder contacts, print contacts only

for coaxial and triaxial conﬁgurations

– coaxial, triaxial and mixed contact conﬁgurations

– polarization by stepped insert (half-moon)

– 360° screening for full EMC shielding

– rugged housing for extreme working condition.

Models

Straight plug

Straight plugs

Fixed sockets

Free sockets

FZP

FFA

FFF

PCA

ERA

ERB

Fixed plug

FAA

Elbow plug

PCA

EEP

EHP

Fixed socket

FLA

PSA

Watertight or vacuumtight models

Fixed sockets

Fixed coupler

Free coupler

RMA

EBR

HGP

SWH

Model Description

EBR Fixed socket with round ﬂange, watertight, FFA Straight plug with oversize cable collet

PCA Free socket with oversize cable collet

PCA Free socket, cable collet

and nut for ﬁtting a bend relief

PSA Fixed socket, nut ﬁxing, cable collet

RMA Free coupler

SWH Fixed coupler, nut ﬁxing, watertight

or vacuumtight

protruding shell and screw ﬁxing

EEP Fixed socket, nut ﬁxing (back panel moun-

ting)

FFA Straight plug, cable collet

and nut for ﬁtting a bend relief

FFF Straight plug non-latching, cable collet

FLA Elbow (90°) plug, cable collet

FZP Straight plug for remote handling,

cable collet and inner anti-rotating device

HGP Fixed socket, nut ﬁxing,

EHP Fixed socket, nut ﬁxing, protruding shell

ERA Fixed socket, nut ﬁxing

ERB Fixed socket, nut ﬁxing with two ﬂats

in the ﬂange

FAA Fixed plug non-latching, nut ﬁxing

FFA Straight plug, cable collet

watertight or vacuumtight

PCA Free socket, cable collet

16

www.lemo.com

®

Part Numbering System

F F A 1 E 2 5 0 C T A C 5 0

P C A 1 E 2 5 0 C T L C 5 0

Plug

Free socket

Z

Variant: ¹⁾(page 27)

Cable ø max. ²⁾

Collet type: C or K

Fixed socket

E R A 1 E 2 5 0 C T L

Variant ¹⁾

Contact type:

A = male solder

L = female solder

Insulator:

L = PEEK

T = PTFE

Model

Series

Housing:

C = brass chrome-plated

K = brass black chrome

T = stainless steel

Insert conﬁguration:

coaxial, triaxial,

multi coax, coax + LV

FFA.1E.250.CTAC50 = straight plug with cable collet, 1E series, coaxial (50 Ω), outer shell in chrome-plated brass, PTFE insulator, C type

collet for an up to 5.0 mm diameter cable.

PCA.1E.250.CTLC50Z = free socket with cable collet, 1E series, coaxial (50 Ω), outer shell in chrome-plated brass, PTFE insulator, C type

collet for an up to 5.0 mm diameter cable and collet nut for ﬁtting a bend relief.

ERA.1E.250.CTL = ﬁxed socket, nut ﬁxing, 1E series, coaxial (50 Ω), outer shell in chrome-plated brass, PTFE insulator.

Note: ¹⁾for mixed contacts, add cable group to the part number.

²⁾see unipole-multipole catalogue.

Part Section Showing Internal Components (mixed coax + LV)

Straight plug

Fixed socket

outer shell

latch sleeve

inner shell

retaining ring

collet nut

centre-piece

insulator

1

2

3

4

5

6

7

8

9

8

2

3

7

6

1

4

9

11 12 10

5

7

6

5

2

3

4

8

1

outer shell

1

2

3

4

5

earthing crown

retaining ring

hexagonal nut

insulator

6 male coaxial contact

7 female contact

female coaxial contact

earthing cone

8

o-ring

10 collet

11

12

gasket

washer

www.lemo.com

17

®

Insert conﬁguration (S and E series)

Coaxial

Series

Sheath ø

1.09

250¹⁾

250

00

–

50

0.7 1 to 9 1.05 3.05

1-2

5.5

2.1

3.0

4

6

00

+0.11f

0S

0E

1.02

+0.25f

0S

0E

0.9

0.95 2.95 6.7 5.0

3-4

1.01

1S

1E

1-2

3-4

250

275

1S

1E

50

75

1.6

1.35 3.95 8.5 8.5

3.0

2.4

12

10

+0.23f

1.02

+0.08f

1.3 5-6-7 1.05 3.95 8.5 8.5

2.0 6-7 1.75 5.95 10.5 10.5

2S

2E

1.01

+0.95f

250

275

2S

2E

50

75

3.0

1.5

15

12

1.02

+0.03f

1.6 6-7 1.35 5.95 10.5 10.5

3S

3E

1.06

250

275

3S

3E

50

75

3.0

2.0

8

2.65 8.15 13.0 15.0

1.75 8.15 13.0 15.0

3.0

2.7

26

15

+0.5f

1.04

+0.05f

4S

4E

1.01

250

275

4S

4E

50

75

4.0 8-9 3.65 10.05 22.0 23.5

3.0 8-9-0 2.65 10.05 22.0 23.5

2.1

1.8

36

26

+1.9f

1.01

+0.12f

5S

1.02

+2.3f

250

5S

–

50

5.0

9

5.15 17.45 30.0 30.0

3.0

45

Note: ¹⁾see NIM-CAMAC catalogue.

18

www.lemo.com

®

Triaxial

Series

Sheath ø

0S

0E

1.03

+0.34f

650

0S

0E

50

0.9 1-2 0.75 2.95 6.7 5.0

1.0

6

1S

1E

1.01

650

675

1S

2S

1E

2E

50

75

0.9 1-2-3 0.75 3.95 8.5 8.5

1.6 2-3-4 1.35 5.95 10.5 10.5

0.9 4-6 0.75 5.95 10.5 10.5

1.0

1.5

6

12

6

+0.17f

2S

2E

1.01

+0.3f

1.01

+0.07f

3S

3E

1.01

650

675

3S

3E

50

75

2.0 3-4-5 1.75 8.45 13.0 15.0

0.9 4-5 0.75 8.45 13.0 15.0

2.4

1.8

15

6

+0.27f

1.01

1.02

+0.05f

4S

4E

1.01

650

675

4S

4E

50

75

3.0 4-5 2.65 10.05 22.0 23.5

2.0 4-5-7 2.25 10.05 22.0 23.5

2.7

2.2

26

15

+0.38f

1.01

+0.14f

www.lemo.com

19

®

Mixed: coax + LV, multi coax

Series

Coaxial

Low voltage

Coax

3S

3E

801

802

803

804

805

806

807

3S

3E

1

50

5

A1 1-2-3

1

2

3

4

5

6

7

1.3 2.7 3.9

1.3 1.2 1.8

1.3 2.7 3.9

1.3 1.2 1.8

0.9 1.8 2.4

0.9 0.8 1.2

14

10

8

3S

8

7

4S

4E

4S

4E

1

2

50

5

A1 1-2-3

2

3

4

5

6

7

9

3.0 2.1 3.0

2.0 2.1 3.0

1.3 2.7 3.9

1.3 2.1 3.0

0.9 2.1 3.0

21

16

13

11

9

802

803

804

805

806

807

809

810

812

202

832

8

7

A1 1-2-3 10

A1 1-2-3 12

7

A1 1-2-3

–

2

–

1.3 2.1 3.0

13

20

www.lemo.com

®

Mixed: coax + LV, multi coax

Series

Coaxial

Low voltage

Coax

4S

4E

4S

4E

2

50

5

A1 1-2-3

4

6

8

1.3 2.1 3.0

0.9 1.8 2.4

13

7

834

836

838

842

4S

7

A1 1-2-3 12

7

5S

5E

–

5E

–

1

2

50

75

50

12

6

A

4-6

3

4

3.0 3.0 4.2

3.0 2.1 3.0

1.6 1.8 2.4

25

22

11

–

803

804

810

232

5S

–

A0 1-3-4

5E

–

7

A

3-4-5

5S

5

A1 1-2-3 10

6

A0 1-3-4

–

2

–

50

75

12

7

4-6

A

282

292

5E

–

3-4-5

50

6

A0 1-3-4

2.0 2.1 3.0

18

832

www.lemo.com

21

®

Mixed: coax + LV, multi coax

Series

Coaxial

Low voltage

Coax

5S

5E

5S

5E

–

2

4

50

75

50

6

7

6

5

A0 1-3-4

4

8

2.0 2.1 3.0

1.6 1.8 2.4

1.3 1.8 2.4

1.3 0.8 1.2

18

12

9

834

838

842

846

850

854

234

876

5S

–

5E

–

A0 1-3-4 12

A

3-4-5 16

8

5S

A0 1-3-4 20

A0 1-3-4 24

7

–

6

5E

A1 1-2-3

–

6

–

1.3 0.8 1.2

6

22

www.lemo.com

®

Mixed: coax + LV, multi coax

Coaxial

Low voltage

Coax

6S

826

830

858

859

866

867

883

1

2

3

4

75

50

75

50

7

5

6

7

4

A

3-4-5 26

2.0 1.5 2.1

7

4

30

3.0 1.5 2.1

1.6 1.5 2.1

14

5

3-4-5

6

1.3 1.2 1.8

1.6 1.2 1.8

2.0 1.2 1.8

1.9 1.2 1.8

4

5

10

2

6

3-4-5

5

17

36

4

1.3 1.2 1.8

3.0 1.2 1.8

4

14

A1 1-2-3

A0 1-3-4 26

2.0 1.5 2.1

7

49

2

0.9 1.2 1.8

1.6 1.2 1.8

2

5

A

3-4-5

A1 1-2-3 30

1.6 1.5 2.1

5

www.lemo.com

23

®

Mixed: coax + LV, multi coax

Coaxial

Low voltage

Coax

6S

50

75

12

7

4-6

284

294

4

A

–

2

3-4-5

882

887

890

893

238

899

75

7

3-4-5 26

0.9 0.8 1.2

2.0 1.5 2.1

4.0 1.5 2.1

1.6 1.5 2.1

1

4

50

26

5

A3

A1

7

9

7

4

10

16

5

}

3

6

8

50

5

6

5

A1 1-2-3

A1 1-2-3 20

A0 1-3-4

–

A1 1-2-3 20

1.6 1.5 2.1

5

24

www.lemo.com

®

Mixed: coax + LV, multi coax

Coaxial

Low voltage

Coax

6E

805¹⁾

831

843

847

856

857

865

1

2

3

75

50

75

7

5

7

A

3-4-5

5

2.0 1.5 2.1

10

24

12

0.9 0.8 1.2

2.0 1.5 2.1

2

10

12

1

2.0 1.5 2.1

3.0 1.5 2.1

10

14

A1 1-2-3 17

2.0 1.5 2.1

1.3 1.2 1.8

10

A

3-4-5 26

7

3-4-5 33

4

21

4

1.3 1.2 1.8

2.0 1.2 1.8

4

10

3-4-5

Note: ¹⁾The type 6E.805 is delivered with female contacts in the plug.

www.lemo.com

25

®

Mixed: coax + LV, multi coax

Coaxial

Low voltage

Coax

6E

866

880

882

884

235

899

3

4

5

8

75

50

75

50

7

5

7

6

5

A

3-4-5 26

1.3 1.2 1.8

0.9 0.8 1.2

4

2

–

5

A1 1-2-3 20

A

3-4-5 20

3-4-5 38

A0 1-3-4

–

A1 1-2-3 20

1.6 1.5 2.1

26

www.lemo.com

®

Mixed: coax + LV + HV

Low voltage High voltage

(LV) (HV)

Coax

4S

4E

1

50

5

A1 1-2-3

4

0.9

1

2.0

934

Collet nut for ﬁtting a bend relief (S and E series)

C type collets for S series

C type collets for E series

Coax cable groupe

Clamping

Coax cable groupe

Clamping

1

2

3

1

2

3

C42Z

C57Z

C72Z

C87Z

C97Z

C11Z

C12Z

C41Z

C51Z

C71Z

C81Z

C91Z

C11Z

C21Z

C42Z

C52Z

C72Z

C82Z

C92Z

C12Z

C22Z

C43Z

C53Z

C73Z

C83Z

C93Z

C13Z

C23Z

C50Z

C55Z

C80Z

C85Z

C90Z

C95Z

C10Z

C11Z

C12Z

C13Z

C14Z

C51Z

C56Z

C81Z

C86Z

C91Z

C96Z

C01Z

C11Z

C21Z

C31Z

C41Z

C52Z

C57Z

C82Z

C87Z

C92Z

C97Z

C02Z

C12Z

C22Z

C32Z

C42Z

C53Z

C58Z

C83Z

C88Z

C93Z

C98Z

C03Z

C13Z

C23Z

C33Z

C43Z

S

E

Note: see unipole-multipole catalogue for others available collets.

www.lemo.com

27

®

Coaxial contacts for S and E series

Sheath ø

1

ꢀ

3

0.55

1.90

ꢀ.5

3.0

ꢀ.1

ꢀ.6

1.01

A1

A0

50

75

50

0.7

0.9

1.6

1.3

3.0

solder

collet

1.7

ꢀ.ꢀ

0.9

3.0

1.8

ꢀ.4

3.0

5

6

+0.1ꢀ7f

1

3

4

0.95

ꢀ.95

1.7

ꢀ.7

3.3

ꢀ.1

3.1

4.1

1.06

+0.1f

1.01

+0.146f

4

6

1.35

3.95

3.3

4.3

4.1

5.1

1ꢀ

7

A

3

4

5

1.05

3.95

ꢀ.ꢀ

3.3

5.3

ꢀ.6

4.1

6.1

1.01

+0.19f

1.06

+0.5f

A3

7

ꢀ.60

8.10

10.0

10.6

15

Recommended coaxial cables for 00 Series (page 18)

LEMO

cable

group

LEMO cable

Part Number

Impedance Conductor

Dielectric

ø (mm)

Screen

ø (mm)

Sheath

ø (mm)

Type

(Ω)

ø (mm)

CCX.50.RG5.8CU50N

CCX.50.RG1.42BU50M

CCX.50.RG1.74U25N

CCX.50.RG1.74AU27N

CCX.50.RG1.78BU18M

CCX.75.RG1.79BU26M

CCX.75.RG1.87AU26B

CCX.50.RG1.88AU24B

CCX.95.RG1.95AU37B

CCX.50.RG1.96AU20B

CCX.50.RG3.16U26M

RG 58 C/U

RG 14ꢀ B/U

RG 174 /U

6

7

3

1

ꢀ

4

5

1

4

8

9

8

50

ꢀ

3

ꢀ

5

ꢀ

5

ꢀ

0.90

0.95

0.48

0.30

0.54

0.30

0.54

0.50

0.19

0.50

ꢀ.95

1.50

0.84

1.50

ꢀ.5ꢀ

0.84

1.50

0.5ꢀ

1.5ꢀ

3.60

3.53 / 4.30

ꢀ.00

5.00

ꢀ.55

ꢀ.80

1.80

ꢀ.50

ꢀ.60

3.70

1.95

ꢀ.60

3.10

1.ꢀ5

3.05

50

75

50

95

50

RG 174 A/U

RG 178 B/U

RG 179 B/U

RG 187 A/U

RG 188 A/U

RG 195 A/U

RG 196 A/U

RG 316 /U

ꢀ.00

1.30

ꢀ.00

3.10

1.30

ꢀ.10

Huber+Suhner, G0ꢀꢀ3ꢀD-60

Huber+Suhner, K0115ꢀ-07

Storm, 4ꢀ1-099

1.95 / ꢀ.40

0.90

ꢀ.00 / ꢀ.50

Note: for more details on cable properties, see NIM-CAMAC catalogue.

28

www.lemo.com

®

Recommended triaxial cables for 00 Series (page 13)

LEMO cable

Part Number

Impedance Conductor

Dielectric

ø (mm)

Screen 1

ø (mm)

Screen 2

ø (mm)

Sheath

ø (mm)

Type

(Ω)

ø (mm)

RGT 316

RGT 403

RGT 174

RGT 178

50

2

0.51

0.30

0.48

0.30

0.49

0.16

1.50

0.84

1.55

0.90

1.50

0.52

2.05

1.30

1.90

1.37

2.00

0.85

3.15

2.35

2.90

2.30

3.05

1.35

3.60

2.95

3.90

2.80

4.25

1.60

50

017 410 LEDE

017 820 LEDE

Huber + Suhner G 02332

SMT 50

Recommended coaxial cables for S and E Series (page 18)

LEMO cable

Part Number

LEMO

cable group

Impedance Conductor

Dielectric

ø (mm)

Screen

ø (mm)

Sheath

ø (mm)

Type

(Ω)

ø (mm)

RG 11 A/U

8

0

6

7

8

4

6

8

3

1

5

2

1

8

9

7

9

6

2

6

3

7

6

75

2

3

2

3

2

3

2

3

2

3

2

3

2

3

2

1.17

1.20

0.90

0.60

2.25

0.80

0.95

1.35

2.46

0.48

0.30

0.54

0.30

2.25

1.20

0.89

2.40

0.64

0.60

1.00

0.48

0.60

0.40

7.25

2.95

3.70

6.50

2.50

2.95

7.25

1.50

0.84

1.50

0.84

7.25

2.95

7.25

3.70

1.60

2.98

1.30

3.80

2.50

8.15

8.20

3.60

4.50

8.00

3.20

4.30

8.00

2.00

1.30

2.00

1.30

8.20

8.80

4.30

8.80

4.40

2.10

4.20

1.90

10.10

11.80

5.00

6.20

10.50

4.10

5.00

10.40

2.80

1.80

2.50

2.60

1.95

10.30

10.80

5.40

10.90

5.10

2.80

5.00

2.70

5.60

4.50

311 100 LEDE

RG 12 A/U

75

50

75

50

75

50

75

50

75

50

75

50

75

RG 58 C/U

CCX.50.RG5.8CU50N

CCX.50.RG5.9BU62N

RG 59 B/U

RG 115 A/U

RG 122 /U

RG 142 B/U

RG 144 /U

CCX.50.RG1.42BU50M

RG 165 /U

RG 174 A/U

RG 178 B/U

RG 179 B/U

RG 187 A/U

RG 188 A/U

RG 196 A/U

RG 213 /U

CCX.50.RG1.74AU27N

CCX.50.RG1.78BU18M

CCX.75.RG1.79BU26M

CCX.75.RG1.87AU26M

CCX.50.RG1.88AU26B

CCX.50.RG1.96AU20B

213 000 LEDE

RG 214 /U

RG 216 /U

RG 223 /U

RG 225 /U

RG 302 /U

RG 316 B/U

RG 400 /U

CCX.50.RG3.16U26M

HF-2114 Dätwyler

HF-5408/1 Dätwyler

2YCCY 0.4/2.5 Siemens

3.70

www.lemo.com

29

®

Recommended coaxial cables for mixed coax, multi coax for S and E Series (pages 20 to 27)

LEMO cable

Part Number

LEMO

cable group

Impedance Conductor

Dielectric

ø (mm)

Screen

ø (mm)

Sheath

ø (mm)

Type

(Ω)

ø (mm)

CCX.50.RG5.8CU50N

RG 58 C/U

6

5

4

6

1

2

3

1

2

7

6

5

1

5

50

2

3

2

3

2

3

2

0.90

0.60

0.80

0.95

0.48

0.30

0.54

0.30

2.25

0.89

0.64

0.54

1.00

2.95

3.70

2.50

2.95

1.50

0.84

1.50

0.84

7.25

2.95

3.70

1.50

2.98

3.60

4.50

3.20

4.30

2.00

1.30

2.00

1.30

8.20

4.30

4.40

2.10

4.20

5.00

6.20

4.10

5.00

2.80

1.80

2.50

2.60

1.95

10.30

5.40

5.10

2.60

5.00

CCX.50.RG5.9BU62N

RG 59 B/U

RG 122 /U

RG 142 B/U

RG 174 A/U

RG 178 B/U

RG 179 B/U

RG 187 A/U

RG 188 A/U

RG 196 A/U

RG 213 /U

RG 223 /U

RG 302 /U

RG 316 /U

RG 400 /U

75

50

75

50

75

50

CCX.50.RG1.42BU50M

CCX.50.RG1.74.AU27N

CCX.50.RG1.78BU18M

CCX.75.RG1.79BU26M

CCX.75.RG1.87AU26M

CCX.50.RG1.88AU26B

CCX.50.RG1.96AU20B

213 000 LEDE

CCX.50.RG3.16U26M

Note: the cable group number corresponding to the chosen cable must be written in the variant position, see pages 15 and 17.

Recommended triaxial cables for S and E Series (page 19)

LEMO cable

Part Number

LEMO

cable group

Impedance Conductor Dielectric Screen 1 Screen 2 Sheath

Type

(Ω)

ø (mm)

CTR.50.RG1.78BU29M

CTR.50.RG1.74AU39N

RGT 178

RGT 174

1

2

3

5

4

6

4

5

7

50

2

3

0.30

0.48

0.94

1.60

0.72

0.80

0.60

0.30

1.00

0.84

1.40

1.60

0.90

1.55

2.90

4.80

4.55

3.70

1.60

4.50

3.70

6.50

7.30

1.37

1.90

3.50

–

2.30

2.90

5.20

–

2.80

3.90

6.10

10.20

8.43

8.00

3.60

8.50

9.20

10.90

12.10

50

75

9222 Belden ¹⁾

HF-2318 Dätwyler

8215 Belden

–

8232A Belden

HF-2426 Dätwyler

RGT 179

–

2.10

5.20

–

3.10

7.20

–

375 029 LEDE

466 140 LEDE

Triax 8 Nokia

9267 Belden

Triax 11 Nokia

8233A Belden

7.20

–

9.40

–

Note: ¹⁾when used with 1S.650 / 1E.650, please request large contact bucket («W» type).

30

www.lemo.com

®

www.lemo.com

31

®

32

www.lemo.com

®

Product safety notice

PLEASE READ AND FOLLOW ALL INSTUCTIONS CAREFULLY AND CONSULT ALL RELEVENT NATIONAL AND

INTERNATIONAL SAFETY REGULATIONS FOR YOUR APPLICATION.

IMPROPER HANDLING, CABLE ASSEMBLY, OR WRONG USE OF CONNECTORS CAN RESULT IN HAZARDOUS

SITUATIONS.

1. SHOCK AND FIRE HAZARD

Incorrect wiring, the use of damaged components, presence of foreign objects (such as metal debris), and / or residue

(such as cleaning ﬂuids), can result in short circuits, overheating, and / or risk of electric shock.

Mated components should never be disconnected while live as this may result in an exposed electric arc and local

overheating, resulting in possible damage to components.

2. HANDLING

Connectors and their components should be visually inspected for damage prior to installation and assembly. Suspect

components should be rejected or returned to the factory for veriﬁcation.

Connector assembly and installation should only be carried out by properly trained personnel. Proper tools must be used

during installation and / or assembly in order to obtain safe and reliable performance.

3. USE

Connectors with exposed contacts should never be live (or on the current supply side of a circuit). Under general

conditions voltages above 30 VAC and 42 VDC are considered hazardous and proper measures should be taken to

eliminate all risk of transmission of such voltages to any exposed metal part of the connector.

4. TEST AND OPERATING VOLTAGES

The maximum admissible operating voltage depends upon the national or international standards in force for the

application in question. Air and creepage distances impact the operating voltage; reference values are indicated in the

catalog however these may be inﬂuenced by PC board design and / or wiring harnesses.

The test voltage indicated in the catalog is 75% of the mean breakdown voltage; the test is applied at 500 V/s and the

test duration is 1 minute.

5. CE MARKING

CE marking

means that the appliance or equipment bearing it complies with the protection requirements of one or

several European safety directives.

CE marking

applies to complete products or equipment, but not to electromechanical components, such as

connectors.

6. PRODUCT IMPROVEMENTS

The LEMO Group reserves the right to modify and improve to our products or speciﬁcations without providing prior

notiﬁcation.

7.

WARNING (Prop 65 State of California)

Proposition 65 requires businesses to provide warnings to Californians about signiﬁcant exposures to chemicals that

cause cancer, birth defects or other reproductive harm. LEMO products are exempt from proposition 65 warnings because

they are manufactured, marketed, and sold solely for commercial and industrial use. For further information, please visit

https://www.lemo.com/quality/LEMO-Prop-65-compliance-declaration.pdf.

Disclaimers

LEMO works constantly to improve the quality of its products; the information and illustrations ﬁguring in this document may

therefore vary and are not binding. In any case, LEMO makes no speciﬁc warranty of merchantability, ﬁtness for a particu-

lar purpose, third party components as such or included in assembly, non-infringement, title, accuracy, completeness, or

security. The user is fully responsible for his products and applications using LEMO component.

In no event shall LEMO, its afﬁliates, ofﬁcers, agents or employees be liable for any incidental, indirect, special or consequen-

tial damages in connection with the products or services provided by LEMO, including (without limitation) loss of proﬁts

or revenues, interruption of business, loss of use of the products or any associated equipment, materials, components or

products, damages to associated equipment or in combination with other components, materials.

Reproduction of signiﬁcant portions of LEMO information in LEMO data books or data sheets is permissible only if repro-

duction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. LEMO is

not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions.

No reproduction or use without express permission of editorial or pictorial content, in any manner.

LEMO SA reserves the right to modify and improve speciﬁcations, at all times, without any notiﬁcation.

www.lemo.com

33

LEMO HEADQUARTERS

SWITZERLAND

LEMO SA

Chemin des Champs-Courbes 28 - P.O. Box 194 - CH-1024 Ecublens

Tel. +41 21 695 16 00 - e-mail: info@lemo.com

LEMO SUBSIDIARIES

AUSTRIA

NETHERLANDS / BELGIUM

LEMO Connectors Nederland B.V.

Jacques Meuwissenweg 6

2031 AD Haarlem

LEMO Elektronik GesmbH

Lemböckgasse 49/E6-3

1230 Wien

Tel: +43 1 914 23 20 0

Fax:+43 1 914 23 20 11

salesAT@lemo.com

Tel. +31 23 206 07 01

info-nl@lemo.com

NORWAY / ICELAND

LEMO Norway A/S

Soerumsandvegen 69,

1920 Soerumsand

Tel: +47 22 91 70 40

Fax: +47 22 91 70 41

info-no@lemo.com

BRAZIL

LEMO Latin America Ltda

Av. Dr. Adhemar de Barros,

566 – Sala 1407, Vila Adyana

CEP: 12245-011

São José dos Campos - SP - Brazil

Tel: +55 11 94242 4293

info-la@lemo.com

SINGAPORE

LEMO Asia Pte Ltd

4 Leng Kee Road,

#06-09 SiS Building

Singapore 159088

Tel: +65 6476 0672

Fax: +65 6474 0672

sg.sales@lemo.com

CANADA

LEMO Canada Inc

44 East Beaver Creek Road, unit 20

Richmond Hill, Ontario L4B 1G8

Tel: +1 905 889 56 78

Fax: +1 905 889 49 70

info-canada@lemo.com

SPAIN / PORTUGAL

IBERLEMO SAU

Brasil, 45, 08402 Granollers

Barcelona

Tel: +34 93 860 44 20

Fax: +34 93 879 10 77

info-es@lemo.com

CHINA / HONG KONG

LEMO Electronics (Shanghai) Co., Ltd

First Floor, Block E,

18 Jindian Road, Pudong

Shanghai, China, 201206

Tel: +86 21 5899 7721

Fax: +86 21 5899 7727

cn.sales@lemo.com

SWEDEN / FINLAND

LEMO Nordic AB

Gunnebogatan 30, Box 8201

163 08 Spånga

Tel: +46 8 635 60 60

Fax: +46 8 635 60 61

info-se@lemo.com

DENMARK

LEMO Denmark A/S

Mandal Allé 16A

5500 Middelfart

Tel: +45 45 20 44 00

Fax: +45 45 20 44 01

info-dk@lemo.com

SWITZERLAND

LEMO Verkauf AG

Grundstrasse 22 B,

6343 Rotkreuz

FRANCE

LEMO France Sàrl

24/28 Avenue Graham Bell

Bâtiment Balthus 4

Tel: +41 41 790 49 40

ch.sales@lemo.com

Bussy Saint Georges

77607 Marne la Vallée Cedex 3

Tel: +33 1 60 94 60 94

Fax: +33 1 60 94 60 90

info-fr@lemo.com

TAIWAN

TAOYUAN TAIWAN

Tel: +886 967 132 824

speng@lemo.com

UNITED ARAB EMIRATES

LEMO Middle East Connectors LLC

Concorde Tower 6th Floor,

Dubai Media City, P.O. Box 126732

Dubai, United Arab Emirates

Tel: +971 55 222 36 77

GERMANY

LEMO Elektronik GmbH

Hanns-Schwindt-Str. 6

81829 München

Tel: +49 89 42 77 03

Fax: +49 89 420 21 92

info@lemo.de

info-me@lemo.com

UNITED KINGDOM

HUNGARY

LEMO UK Ltd

REDEL Elektronika Kft

Nagysándor József u. 6-12

1201 Budapest

12-20 North Street, Worthing,

West Sussex, BN11 1DU

Tel: +44 1903 23 45 43

lemouk@lemo.com

Tel: +36 1 421 47 10

Fax: +36 1 421 47 57

info-hu@lemo.com

USA

LEMO USA Inc

ITALY

P.O. Box 2408

LEMO Italia srl

Rohnert Park, CA 94927-2408

Tel: +1 707 578 88 11

+1 800 444 53 66

Fax: +1 707 578 08 69

info-US@lemo.com

Viale Lunigiana 25

20125 Milano

Tel: +39 02 66 71 10 46

Fax: +39 02 37 90 80 46

sales.it@lemo.com

JAPAN

LEMO Japan Ltd

2-7-22, Mita,

Minato-ku, Tokyo, 108-0073

Tel: +81 3 54 46 55 10

Fax: +81 3 54 46 55 11

info-jp@lemo.com

LEMO DISTRIBUTORS

ARGENTINA, AUSTRALIA, BRAZIL, CHILE, COLOMBIA, CZECH REPUBLIC,

GREECE, INDIA, ISRAEL, NEW ZEALAND, PERU, POLAND, RUSSIA,

SOUTH AFRICA, SOUTH KOREA, TURKEY, UKRAINE

www.lemo.com


型号：	HGP.0E.650.CTLPV
厂家：	ETC
描述：	CONN PNL RCPT TRIAX SKT SLDER
文件：	总36页 (文件大小：6357K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

HGP.0E.650.CTLPV [ETC]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E