HSD190ME13-D10 [ETC]
Display;HannStar Display Corp.
Document Title
Document No.
HSD190ME13-D Product Information
Page No.
Revision
1 / 27
1.0
Hannstar Product Information
Model : HSD190ME13
- D10
Note: 1. Please contact HannStar Display Corp. before designing your product based on this module
specification.
2. The information contained herein is presented merely to indicate the characteristics and
performance of our products. No responsibility is assumed by HannStar for any intellectual property
claims or other problems that may result from application based on the module described herein.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
HannStar Display Corp.
Document Title
Document No.
HSD190ME13-D Product Information
Page No.
Revision
2 / 27
1.0
Record of Revisions
Rev. Updated No.
Date
Description of change
1.0
─
28-Dec-05
HSD190ME13-D product information was first issued.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
HannStar Display Corp.
Document Title
Document No.
HSD190ME13-D Product Information
Page No.
Revision
3 / 27
1.0
Contents
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
General Descriptions ……………………………….…
Absolute Maximum Ratings …………………………..
Optical Characteristics ………………………………..
Block Diagram …………………………………………
I/O Connection Pin Assignment ……………………..
p.4
p.5
p.7
p.11
p.14
p.15
p.21
p.23
p.24
p.26
Electrical Characteristics
………………….………..
Outline Dimension …………………………….………
Lot Mark ………………………………………………..
Package Specification ……………………………...…
10.0 General Precaution ……………………………………
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
HannStar Display Corp.
Document Title
Document No.
HSD190ME13-D Product Information
Page No.
Revision
4 / 27
1.0
1.0 GENERAL DESCRIPTIONS
1.1 Introduction
HannStar Display model HSD190ME13-D is a color active matrix thin film transistor (TFT)
liquid crystal display (LCD) that uses amorphous silicon TFT as a switching device. This
model is composed of a TFT LCD panel, the voltage reference, common voltage, DC-DC
converter, column, and row driver circuit. This TFT LCD has a 19-inch diagonally
measured active display area with SXGA resolution (1024 vertical by 1280 horizontal
pixel array) and can display up to 16.7 million colors.
1.2 Features
■ 19”SXGA TFT LCD Panel
■ 4 CCFLs Backlight System
■ Supported SXGA (V:1024 lines, H:1280 pixels) Resolution
■ Supported to 75Hz Refresh Rate
■ LCD Timing Controller
■ RoHS Compliance
■ VESA Compatible
1.3 Applications
■ Desktop Monitors
■ Display terminals for AV applications
■ Monitors for industrial applications
1.4 General information
Item
Specification
Unit
mm
Outline dimension
Display area
Number of Pixel
Pixel pitch
396*324 *17.5(Typ)
376.32 (H) x301.056 (V) (19.0” diagonal)
1280(H) x 1024(V)
mm
Pixels
mm
0.294(H) x 0.294(V)
RGB Vertical Stripe
Pixel arrangement
Display color
Display mode
Surface treatment
Weight
16.2M (6-bits+FRC)
Normally white
Antiglare, Hard-Coating(3H)
2600g(Typ.)
g
Back-light
4-CCFLs, Top & bottom edge side
2-ch LVDS
Input signal
System
B/L
3.05
20
Power consumption
W
Optimum viewing direction
6 o’clock
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
HannStar Display Corp.
Document Title
Document No.
HSD190ME13-D Product Information
Page No.
Revision
5 / 27
1.0
1.5 Mechanical Information
Item
Min.
395.5
323.5
17.0
2450
--
Typ.
396.0
324.0
17.5
2600
--
Max.
Unit
Horizontal(H)
396.5
324.5
18.0
2750
3.0
mm
mm
Module Size
Vertical(V)
Depth(D)
mm
Weight (without inverter)
g
Torque of customer screw hole
Kgf*Cm
2.0 ABSOLUTE MAXIMUM RATINGS
2.1 Absolute Rating of Environment
Item
Symbol
Min.
-20
0
Max.
Unit
oC
oC
Note
Storage temperature
TSTG
TOPR
VNOP
SNOP
HSTG
HOP
60
50
1.5
70
90
80
--
Operating temperature
Vibration(non-operating)
Shock(non-operating)
(1)
(2)
(3)
(3)
(4)
(5)
(6)
--
G
--
G
Storage humidity
10
10
697
116
%RH
%RH
HPa
HPa
Operating humidity
Low pressure(operating)
Low pressure(non-operating)
PLOP
PLNOP
--
Note (1)Storage /Operating temperature
Humidity (%)
100
90
80
60
Operating Range
40
Storage Range
20
10
0
0
20
40
50
60
65
-40
-20
Temperature (oC)
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
HannStar Display Corp.
Document Title
Document No.
HSD190ME13-D Product Information
Page No.
Revision
6 / 27
1.0
(2) 5-500-5Hz sine wave, X,Y,Z each directions, 30 min/cycle.
(3) 11ms, ±X, ±Y, ±Z direction, one time each. For this shock test,
It is necessary to fill the silicon rubber between the shock jig as buffer.
(4) Max wet bulb temp. =39oC
(5) 2 hrs. (10000 feet)
(6) 24hrs. (50000 feet)
2.2 Electrical Absolute Rating:
2.2.1 TFT LCD Module:
Item
Symbol
VDD
Min.
-0.3
Max.
5.5
Unit.
Note
Power supply Voltage
V(DC) (1)(2)
2.2.2 Back Light Unit:
Item
Symbol
Min.
Max.
9.0
80
Unit
mA
Note
Lamp current
Lamp frequency
IL
fL
3.0
40
(1)(2)(3)
(1)(2)(3)
KHz
Note: (1) Permanent damage may occur to the LCD module if beyond this specification.
Functional operation should be restricted to the conditions described under
Normal Operating Conditions.
(2) To exceed 7.5mA, life time accelerate drop down and if to exceed 9.0 mA has
safety problem. If current lower than 3.5 mA, CCFL would be unstable or
damaged.
(3) Within Ta=25±2°C
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
HannStar Display Corp.
Document Title
Document No.
HSD190ME13-D Product Information
Page No.
Revision
7 / 27
1.0
3.0 OPTICAL CHARACTERISTICS
3.1 Optical specification
Item
Symbol Condition
Min.
450
--
Typ.
700
1.5
Max.
Unit
Note
Contrast
CR
--
3
7
(1)(2)
Rising
Falling
Response time
TR +TF
msec
cd/m2
(1)(3)
--
3.5
White luminance
(1)(4)
(IL=7.5mA)
YL
240
300
--
(center of screen)
Θ=0o
φ=0o
Normal
viewing
angle
Rx
Ry
0.614
0.298
0.644
0.328
0.674
0.358
Red
Gx
Gy
Bx
0.260
0.584
0.112
0.049
0.280
0.300
65
0.290
0.614
0.142
0.079
0.310
0.330
75
0.320
0.644
0.172
0.109
0.340
0.360
--
Gree
n
Color
chromaticity
(CIE1931)
(1)(4)
Blue
White
Hor.
Ver.
By
Wx
Wy
ΘL
ΘR
ΘH
ΘL
ΘL
ΘR
ΘH
ΘL
65
75
--
Viewing angle
Viewing angle
CR>10
CR>5
65
75
--
55
65
--
--
80
--
Hor.
Ver.
--
80
--
--
80
--
--
80
--
Θ=0o
φ=0o
Brightness uniformity
BUNI
75
--
--
%
(6)
3.2 Measuring Condition
■ Measuring surrounding : dark room
■ Lamp current IBL : (7.5)±0.1mA, lamp freq. FL=48 KHz,Inverter :EMAX PLCD0819402-C
■ VDD1=5.0V, fV=60Hz, fDCLK=54MHz
■ Surrounding temperature : 25±2oC
■ 30min. Warm-up time.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
HannStar Display Corp.
Document Title
Document No.
HSD190ME13-D Product Information
Page No.
Revision
8 / 27
1.0
3.3 Measuring Equipment
■ MD-3000 of Otsuka Electric Corp., which utilized MCPD-7000 for Chromaticity
and BM-5A for other optical characteristics.
■ Measuring spot size : 10~12mm
Note (1) Definition of Viewing Angle:
ΦH
12’ o’clock
ΦH=90o
ΘL
ΘR
ΘL=90o
ΘR=90o
ΦL
6’ o’clock
ΦL=90o
Note (2) Definition of Contrast Ratio(CR) :
measured at the center point of panel
Luminance with all pixels white (L255)
CR =
Luminance with all pixels black (L0)
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
HannStar Display Corp.
Document Title
Document No.
HSD190ME13-D Product Information
Page No.
Revision
9 / 27
1.0
Note (3) Definition of Response Time: Sum of TR and TF
white(TFT OFF) black
(TFT ON)
white(TFT OFF)
T
R
TF
100%
90%
Optical
response
10%
0%
time
Note (4) Optical characteristic measurement setup
Photo-detector (BM-5A)
Field=2 o
50cm
LCD panel
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
HannStar Display Corp.
Document Title
Document No.
HSD190ME13-D Product Information
Page No.
Revision
10 / 27
1.0
Note (5) Definition of Center Luminance of White (center)
Center Luminance= Y1
1/10 H
1/2H
1/10H
1/10V
Y1
1/2V
1/10V
Note (6) Definition of brightness uniformity
(Min Luminance of 9 points)
Luminance uniformity =
x 100%
(Max Luminance of 9 points)
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
HannStar Display Corp.
Document Title
Document No.
HSD190ME13-D Product Information
Page No.
Revision
11 / 27
1.0
4.0 BLOCK DIAGRAM
4.1 LCD Module Block Diagram:
X-driver IC
TCON with
LVDS receiver
Liquid Crystal Panel
1280×1024 pixels
DC/DC
Converter
Gamma
Reference
Voltage
Generator
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
HannStar Display Corp.
Document Title
Document No.
HSD190ME13-D Product Information
Page No.
Revision
12 / 27
1.0
4.2 Back Light Unit
1
2
Hot 1
Cold 1
1
2
Hot 2
Cold 2
Back light lamp
CN2, 3, 4, 5.
1
2
Hot 1
Cold 1
1
2
Hot 2
Cold 2
4.3 Pixel Format
1,
1280
1,1
1,2
1,3
1,4
(odd) (even) (odd) (even)
2,1
(odd)
LCD Display Area
1
Pixel
G
1024 Lines
R
R
B
R
1024
,1
1024
1280
1280 Pixels
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
HannStar Display Corp.
Document Title
Document No.
HSD190ME13-D Product Information
Page No.
Revision
13 / 27
1.0
4.4 Relationship Between Displayed Color and Input
MSB
LSB MSB
LSB MSB
LSB Gray scale
R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0
Display
Black
Blue
Level
L L L L L L L L L L L L L L L L L L L L L L L L
L L L L L L L L L L L L L L L L H H H H H H H H
L L L L L L L L H H H H H H H H L L L L L L L L
-
-
Green
-
Basic
color
Light Blue L L L L L L L L H H H H H H H H H H H H H H H H
Red H H H H H H H H L L L L L L L L L L L L L L L L
-
-
Purple H H H H H H H H L L L L L L L L H H H H H H H H
Yellow H H H H H H H H H H H H H H H H L L L L L L L L
-
-
White
Black
H H H H H H H H H H H H H H H H H H H H H H H H
L L L L L L L L L L L L L L L L L L L L L L L L
L L L L L L L H L L L L L L L L L L L L L L L L
L L L L L L H L L L L L L L L L L L L L L L L L
-
L0
L1
L2
Dark
↑
︰
︰
︰
L3…L251
Gray scale
of Red
↓
H H H H H H L L L L L L L L L L L L L L L L L L
H H H H H H L H L L L L L L L L L L L L L L L L
H H H H H H H L L L L L L L L L L L L L L L L L
L252
L253
L254
Light
Red
H H H H H H H H L L L L L L L L L L L L L L L L Red L255
Black
L L L L L L L L L L L L L L L L L L L L L L L L
L L L L L L L L L L L L L L L H L L L L L L L L
L L L L L L L L L L L L L L H L L L L L L L L L
L0
L1
Dark
↑
L2
︰
︰
︰
L3…L251
Gray scale
of Green
↓
L L L L L L L L H H H H H H L L L L L L L L L L
L L L L L L L L H H H H H H L H L L L L L L L L
L L L L L L L L H H H H H H H L L L L L L L L L
L252
L253
L254
Light
Green
Black
L L L L L L L L H H H H H H H H L L L L L L L L Green L255
L L L L L L L L L L L L L L L L L L L L L L L L
L L L L L L L L L L L L L L L L L L L L L L L H
L L L L L L L L L L L L L L L L L L L L L L H L
L0
L1
Dark
↑
L2
︰
︰
︰
L3…L251
Gray scale
of Blue
↓
L L L L L L L L L L L L L L L L H H H H H H L L
L L L L L L L L L L L L L L L L H H H H H H L H
L L L L L L L L L L L L L L L L H H H H H H H L
L252
L253
L254
Light
Blue
L L L L L L L L L L L L L L L L H H H H H H H H Blue L255
Black
L L L L L L L L L L L L L L L L L L L L L L L L
L L L L L L L H L L L L L L L H L L L L L L L H
L L L L L L H L L L L L L L H L L L L L L L H L
L0
L1
Dark
↑
L2
Gray scale
of White &
Black
︰
︰
︰
L3…L251
↓
H H H H H H L L H H H H H H L L H H H H H H L L
H H H H H H L H H H H H H H L H H H H H H H L H
H H H H H H H L H H H H H H H L H H H H H H H L
L252
L253
L254
Light
White
H H H H H H H H H H H H H H H H H H H H H H H H White L255
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
HannStar Display Corp.
Document Title
Document No.
HSD190ME13-D Product Information
Page No.
Revision
14 / 27
1.0
5.0 I/O CONNECTION PIN ASSIGNMENT
5.1 Interface Connector (30-pins, StarConn: 093G30-B001A, or JAE: FI-X30SSL-HF or
equivalent)
Pin No.
1
Signal
RinO0-
RinO0+
RinO1-
RinO1+
RinO2-
RinO2+
VSS
Description
Receiver Signal (-)
2
3
4
5
6
7
Receiver Signal (+)
Receiver Signal (-)
Receiver Signal (+)
Receiver Signal (-)
Receiver Signal (+)
Ground
8
9
RinOC-
RinOC+
RinO3-
RinO3+
RinE0-
RinE0+
VSS
RinE1-
RinE1+
VSS
RinE2-
RinE2+
RinEC-
RinEC+
RinE3-
RinE3+
VSS
Clock Signal (-)
Clock Signal (+)
Receiver Signal (-)
Receiver Signal (+)
Receiver Signal (-)
Receiver Signal (+)
Ground
Receiver Signal (-)
Receiver Signal (+)
Ground
Receiver Signal (-)
Receiver Signal (+)
Clock Signal (-)
Clock Signal (+)
Receiver Signal (-)
Receiver Signal (+)
Ground
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
VSS
NC
VSS
Ground
NC
Ground
Power Supply, 5V (Typical)
Power Supply, 5V (Typical)
Power Supply, 5V (Typical)
VDD+5V
VDD+5V
VDD+5V
5.2 Back Light Unit (CCFL) Connectors:
CN2, 3, 4, 5: CCFL Power Source (Yeonho 35001H5-02 or equivalent)
Pin No.
Symbol
Hot1
Cold1
Color
Pink
White
Function
CCFL power supply (High voltage)
Ground
1
2
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
HannStar Display Corp.
Document Title
Document No.
HSD190ME13-D Product Information
Page No.
Revision
15 / 27
1.0
6.0 ELECTRICAL CHARACTERISTICS
6.1 TFT LCD Module:
Item
Voltage of power supply
White
Symbol
Min.
4.5
430
510
660
56
Typ.
5.0
530
610
760
60
Max.
5.5
630
710
860
76
Unit
V
Note
VDD
IDD0
IDD1
IDD2
fV
mA
mA
mA
Hz
(1)
(1)
(1)
(2)
Current of power
V-Color
supply
Mosaic
Vsync frequency
Hsync frequency
Frequency
fH
64
64
80
KHz
MHz
A
fDCLK
IRUSH
50
54
67.5
3.0
Input rush current
--
--
(3)
Note (1)
(a)White:
(b).V-Color :
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
HannStar Display Corp.
Document Title
Document No.
HSD190ME13-D Product Information
Page No.
Revision
16 / 27
1.0
(c)Mosaic : 2 Dot checker image
L31
L0
Grey scale:L0~L255
L0: Luminance with all pixels black.
L255: Luminance with all pixels white.
Note (2) When fv is too low, a flicker may be occurred on the display.
Note (3) Input Rush Current condition
5 V
0.9VDD
0.1VDD
GND
500us~10ms
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
HannStar Display Corp.
Document Title
Document No.
HSD190ME13-D Product Information
Page No.
Revision
17 / 27
1.0
6.2 Back-Light Unit
The back-light system is an edge-lighting type with 4 CCFL(Cold Cathode Fluorescent Lamp).
The characteristics of the lamp are shown in the following tables.
Item
Symbol
IL
Min.
3.0
Typ.
7.5
670
50
Max.
9.0
Unit
Note
(1)
Lamp current
Lamp voltage
Frequency
mA(rms)
VL
603
737
80
V(rms) IL=7.5mA
KHz (2)
fL
40
Hr
50,000
40,000
1595
1870
--
--
Hour 6.5mA(3)
Operating Lifetime
Startup voltage
Hr
--
50,000
Hour 7.5mA(3)
at 25oC
V(rms)
Vs
--
--
at 0oC
INVERTER
1
2
1
2
(EMAX
PLCD0819402-
C)
A
A
1
2
1
2
LCD MODULE
1
2
1
2
A
A
1
2
1
2
Note (1)
Lamp current is measured with current meter for high frequency as shown below. Specified
values are for a single lamp. To exceed 7.5 mA, life time accelerate drop down and if to
exceed 9.0 mA has safety problem. If current lower than 3.5 mA, CCFL would be unstable or
damaged.
Note (2)
Lamp frequency may produce interference with horizontal synchronous frequency and this
may cause ripple noise on the display. Therefore lamp frequency shall be kept away from
the horizontal synchronous frequency and its harmonics as far as possible in order to avoid
interference.
Note (3)
Lamp life time (Hr) can be defined as the time in which it continues to operate under the
condition : Ta=25±3oC, Typical IL value indicated in the above table and fL=48 kHz until the
brightness becomes less than 50%
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
HannStar Display Corp.
Document Title
Document No.
HSD190ME13-D Product Information
Page No.
Revision
18 / 27
1.0
Note (4)
CCFL inverter should be able to provide a voltage over specified value (Vs) in the above
table. Lamp units need at least Vs value shown above to ignition.
Note (5)
The voltage over specified value (Vs) should be applied to the lamp more than 1 second
after startup. Otherwise, the lamp may not be turned on. The used lamp current is the lamp
typical current.
Note (6)
The output voltage waveform and current waveform of the inverter must be symmetrical
(Unsymmetrical ratio is less than 10%). Please do not use the inverter which has
unsymmetrical voltage and current waveform, and spike waveform. The inverter design
which can provide the best optical performance, power efficiency, and lamp life should
under the following conditions.
a. The asymmetry rate of the inverter waveform should be less than 10%.
b. The distortion tae of the waveform should be within √2±10%.
c. The inverter output waveform should be better similar to the ideal sine wave.
Ip
I-p
Asymmetry rate = |Ip-I-p| / Irms x 100%
Distortion rate = Ip (or I-p) / Irms
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
HannStar Display Corp.
Document Title
Document No.
HSD190ME13-D Product Information
Page No.
Revision
19 / 27
1.0
6.3 Interface Timing ( DE mode)
Item
Symbol
Min.
56
Typ.
60
Max.
Unit
Hz
Frame Rate
--
t1
t2
t3
t4
t5
t6
t7
76
1150
1024
126
875
640
235
67.5
Frame Period
1028
1024
4
1066
1024
42
line
Vertical Display Time
Vertical Blanking Time
1 Line Scanning Time
Horizontal Display Time
Horizontal Blanking Time
Clock Rate
line
line
780
640
140
50
844
640
204
54
clock
clock
clock
MHz
Timing Diagram of Interface Signal (DE mode)
NCLK
DE
R,G,B[0:7]
NCLK
DE
1
2
3
4
5
6
7
8
9
10
11
12
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1
2
3
4
5
6
R,G,B[0:7]
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
HannStar Display Corp.
Document Title
Document No.
HSD190ME13-D Product Information
Page No.
Revision
20 / 27
1.0
6.4 Power On / Off Sequence:
Power On
Power Supply
Power Off
0.9VDD
0.1VDD
0.9VDD
0.1VDD
0.1VDD
0V
TP1
TP3
TP2
Signal
TP4
0.6V
0.6V
0V
TP5
50%
TP6
50%
Backlight
(Recommended)
Item
TP1
TP2
TP3
TP4
TP5
TP6
Min.
0.5
0
Typ.
Max.
10
50
50
--
Unit Remark
msec
msec
msec
msec
--
--
--
--
--
--
0
500
200
200
--
--
msec
msec
Note:(1) The supply voltage of the external system for the module input should be the
same as the definition of VDD.
(2) Apply the lamp volatge within the LCD operation range. When the back-light
turns on before the LCD operation or the LCD truns off before the back-light
turns off, the display may momentarily become white.
(3) In case of VDD = off level, please keep the level of input signal on the low or
keep a high impedance.
(4) TP4 should be measured after the module has been fully discharged between
power off and on period.
(5) Interface signal shall not be kept at high impedance when the power is on.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
HannStar Display Corp.
Document Title
Document No.
HSD190ME13-D Product Information
Page No.
Revision
21 / 27
1.0
7.0 OUTLINE DIMENSION
7.1 Front View:
Date: 2005.12.21
BM Assembly Tolerance
| A-A’ | ≤ 1 (mm)
| B-B’ | ≤ 1 (mm)
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
HannStar Display Corp.
Document Title
Document No.
HSD190ME13-D Product Information
Page No.
Revision
22 / 27
1.0
7.2 Back View:
Date: 2005.12.21
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
HannStar Display Corp.
Document Title
Document No.
HSD190ME13-D Product Information
Page No.
Revision
23 / 27
1.0
8.0 LOT MARK
8.1 Lot Mark
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15
code 1,2,3,4,5,6: HannStar internal fow control code.
code 7: production location.
code 8: production year.
code 9: production month.
code 10,11,12,13,14,15: serial number.
Note (1) Production Year
Year
1999 2000 2001 2002 2003 2004 2005 2006 2007 2008
Mark
9
0
1
2
3
4
5
6
7
8
Note (2) Production Month
Month
Mark
Jan. Feb. Mar. Apr. May. Jun. Jul. Aug. Sep. Oct Nov. Dec.
1
2
3
4
5
6
7
8
9
A
B
C
8.2 Location of Lot Mark
(1) The label is attached to the backside of the LCD module.
(2) This is subject to change without prior notice.
HSD190ME13
-D10
RoHS
Rev:
Lot mark
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
HannStar Display Corp.
Document Title
Document No.
HSD190ME13-D Product Information
Page No.
Revision
24 / 27
1.0
9.0 PACKAGE SPECIFICATION
9.1 packing form
(1) package quantity in one carton: 8 pieces.
(2) carton size: 544±3 mm×302±3 mm×446±3 mm.
(3) for domestic transportation only.
9.2 packing assembly drawings
Bag
LCD Module
Packing plate
Tape
Packing pair
One packing
Packing plate
Packing pair
Packing plate
Tape
Bag
Carton
Carton
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
HannStar Display Corp.
Document Title
Document No.
HSD190ME13-D Product Information
Page No.
Revision
25 / 27
1.0
9.3 Pallet transportation specification
Band
Packing case
Band clip
Tape
1060±5 mm
Pallet
1150±5 mm
970±5 mm
1 Pallet = 12 cartons
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
HannStar Display Corp.
Document Title
Document No.
HSD190ME13-D Product Information
Page No.
Revision
26 / 27
1.0
10.0 GENERAL PRECAUTION
10.1 Use Restriction
This product is not authorized for use in life supporting systems, aircraft navigation
control systems, military systems and any other application where performance failure
could be life threatening or otherwise catastrophic.
10.2
10.3
Disassembling or Modification
Do not disassemble or modify the module. It may damage sensitive parts inside LCD
module, and may cause scratches or dust on the display. HannStar does not warrant the
module, if customers disassemble or modify the module.
Breakage of LCD Panel
10.3.1 If LCD panel is broken and liquid crystal spills out, do not ingest or inhale liquid
crystal, and do not contact liquid crystal with skin.
10.3.2 If liquid crystal contacts mouth or eyes, rinse out with water immediately.
10.3.3 If liquid crystal contacts skin or cloths, wash it off immediately with alcohol and
rinse thoroughly with water.
10.3.4 Handle carefully with chips of glass that may cause injury, when the glass is
broken.
10.4
10.5
Electric Shock
10.4.1 Disconnect power supply before handling LCD module.
10.4.2 Do not pull or fold the CCFL cable.
10.4.3 Do not touch the parts inside LCD modules and the fluorescent lamp’s
connector or cables in order to prevent electric shock.
Absolute Maximum Ratings and Power Protection Circuit
10.5.1 Do not exceed the absolute maximum rating values, such as the supply voltage
variation, input voltage variation, variation in parts’ parameters, environmental
temperature, etc., otherwise LCD module may be damaged.
10.5.2 Please do not leave LCD module in the environment of high humidity and high
temperature for a long time.
10.5.3 It’s recommended employing protection circuit for power supply.
10.6
Operation
10.6.1 Do not touch, push or rub the polarizer with anything harder than HB pencil
lead.
Use fingerstalls of soft gloves in order to keep clean display quality, when
persons Handle the LCD module for incoming inspection or assembly.
10.6.2 When the surface is dusty, please wipe gently with absorbent cotton or other
soft material.
10.6.3 Wipe off saliva or water drops as soon as possible. If saliva or water drops
contact with polarizer for a long time, they may causes deformation or color
fading.
10.6.4 When cleaning the adhesives, please use absorbent cotton wetted with a little
petroleum benzene or other adequate solvent.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
HannStar Display Corp.
Document Title
Document No.
HSD190ME13-D Product Information
Page No.
Revision
27 / 27
1.0
10.7
Mechanism
Please mount LCD module by using mounting holes arranged in four corners tightly.
10.8
Static Electricity
10.8.1 Protection film must remove very slowly from the surface of LCD module to
prevent from electrostatic occurrence.
10.8.2 Because LCD module uses CMOS-IC on circuit board and TFT-LCD panel, it is
very weak to electrostatic discharge. Please be careful with electrostatic
discharge.
10.8.3 Persons who handle the module should be grounded through adequate
methods.
10.9
Strong Light Exposure
The module shall not be exposed under strong light such as direct sunlight. Otherwise,
display characteristics may be changed.
10.10 Disposal
When disposing LCD module, obey the local environmental regulations.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
相关型号:
©2020 ICPDF网 联系我们和版权申明