HSL-HUB3 [ETC]
High Speed Link Extension Modules; 高速连接扩展模块
| 型号： | HSL-HUB3 |
| 厂家： | 
ETC |
| 描述： | High Speed Link Extension Modules |
| 文件： | 总1页 (文件大小：309K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
HSL Slave Modules
1
Software &
Utilities
HSL-HUB3 / HSL-Repeater
High Speed Link Extension Modules
2
DAQ
Features
3
■ Linking style: Master to HUB, HUB to HUB, HUB to Slave
■ Support T bracing connection and star connection (subsystem concept)
■ One input port with 3 output segment ports
■ Jumper selectable transmission speeds: 3/6/12 Mbps
■ Full and half duplex transmission mode are jumper selectable
■ RJ-45 phone jack for easy installation
PXI
4
■ 24 VDC input
Modular
Instruments
HSL-HUB3
The extension possibility of HSL system by using
HSL-HUB3/HSL-Repeater
5
HSL-Repeater
Without HSL-Repeater
300 m
GPIB & Bus
Expansion
With HSL-Repeater
X8
2400 m
General Introduction
The HSL-HUB3 is an HSL subsystem which can offer one to three port
transformation in automation applications. Unlike the traditional daisy
chain configurations, the HSL-HUB3 provides more flexible connections
(tree configurations) while building up the application.
6
Without Repeater Repeater X 1 Repeater X 2 Repeater X 5 Repeater X 7
Motion
Control
12 Mbps
6 Mbps
3 Mbps
100 m
200 m
300 m
200 m
400 m
600 m
300 m
600 m
900 m
600 m
1200 m
1800 m
800 m
1600 m
2400 m
The HSL-Repeater is the HSL subsystem which can extend the connection
distance in automation application, especially in factory automations.
One HSL bus can connect up to seven repeater modules and wire
lengths up to 2.4 KM at a 3 Mbps transmission rate. In other words, all
2016 points can be monitored within 4 ms via the HSL bus up to 2.4 KM
in length to provide fast, time-deterministic, and robust configurations
over traditional RS-485 devices.
7
Real-time
Distributed
I/O
8
HSL-Terminator
PAC
High Speed Link Extension Module
9
Remote I/O
Features
■ Linking style: Master to HUB, HUB to HUB, HUB to Slave
■ Support T bracing connection and star connection (subsystem concept)
■ One input port with 3 output segment ports
■ Jumper selectable transmission speeds: 3/6/12 Mbps
■ Full and half duplex transmission mode are jumper selectable
■ RJ-45 phone jack for easy installation
10
Communi-
cations
11
■ 24 VDC input
Vision
12
F
Embedded
Computers
General Introduction
The HSL-Terminator can be used for stable communication. The HSL-
Terminator provides an adjustable resistor to allow the impedance of the
wiring of the HSL system or Motionnet system to be adjusted to ensure
the quality of the transmission.
13
Industrial
Computers
cPCI &
7-10
www.adlinktech.com
相关型号：
©2020 ICPDF网 联系我们和版权申明