ILR3SAD2L0Y [ETC]

SWITCH PUSHBUTTON SPST-NO 2A 24V;


型号：	ILR3SAD2L0Y
厂家：	ETC
描述：	SWITCH PUSHBUTTON SPST-NO 2A 24V
文件：	总5页 (文件大小：2896K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

IL series

Sealed pushbutton switches for thick panels •

long bushing Ø 12 mm • momentary

DISTINCTIVE FEATURES

Momentary pushbuttons for thick panels

Illuminated or non-illuminated

Tactile feedback

Flat round actuator for optional marking

Sealed to IP67 (standard models only)

ENVIRONMENTAL SPECIFICATIONS

• Front panel sealing according to IEC 60529 : IP67 (standard models)

IP54 (options X1242 and 234)

• Shock resistance : 100 g according to IEC 512-4, test 6c

• Vibration resistance : 10-500 Hz - 10 g according to IEC 512-4, test 6d

• Salt spray : IEC 512-6, test 11f

• Operating temperature : -40 °C to +85 °C (-40 °F to +185 °F)

ELECTRICAL SPECIFICATIONS

• Max. current/voltage rating with resistive load :

2 A 24 VDC, 200,000 cycles

• Initial contact resistance : 50 mΩ max.

• Insulation resistance : 1 GΩ min. at 500 VDC

• Dielectric strength : 1,000 Vrms

LED COMPONENT SPECIFICATIONS

LED color

Super red (L0S)

Yellow (L0Y)

Forward current

20 mA

Typ. forward voltage

Max. forward voltage

2.1 V

2.3 V

3.8 V

4.25 V

2.5 V

20 mA

2.1 V

Green (L0G)

20 mA

2.1 V

3.2 V

Blue (L0B)

20 mA

White (L0W)

20 mA

3.35 V

Red/Green (LSG)

Yellow/green (LYG)

20 mA

Red: 1.95 V / Green: 2.1 V

Yellow: 2 V / green: 2.1 V

20 mA

A resistor must be series-connected by the user.

Resistor value = supply voltage - LED forward voltage

LED forward current

The company reserves the right to change specifications without notice.

IL series

Sealed pushbutton switches for thick panels •

long bushing Ø 12 mm • momentary

GENERAL SPECIFICATIONS

TERMINALS

• Panel thickness : 1.50 mm (.059) min. 10 mm (.393) max.

• Total travel : 1.7 mm (.067) ± 0.3 mm

• Typical operating force : 4 N ± 2 N

• Low level or mechanical life : 1,000,000 cycles

1.00

(.039)

• Torque (applied to nut) :

1 Nm max. with metal nut U166

1.5 Nm max. with plastic nut U4248

Straight P

• Soldering : 300 °C (572 °F) max. for 3 seconds

MATERIALS

ELECTRICAL FUNCTION

• Case : thermoplastic UL94-V0

• Actuator : polyamide 6/6

• Bushing/bezel : polyamide 6/6

• Contacts : silver, gold plated

• Terminal seal : epoxy

APEM products may be recycled at end-of-life for the re-claiming of valuable

Function 3 (NO)

metal components.

MOUNTING STANDARD BEZEL

MOUNTING REDUCED MODEL

PANEL CUT-OUT

12.90

(.507)

12.90

(.507)

Ø13.60

(.535DIA)

Ø13.60

(.535DIA)

Ø13.50

Ø15.60

(.531DIA)

(.614DIA)

(.531DIA)

- Flat seal

- O-ring

MATRIX MOUNTING - BACK OF PANEL SPACE REQUIREMENT

MATRIX MOUNTING

17.50

(.689)

17.50

(.689)

20.00

(.787)

20.00

(.787)

IL series

Sealed pushbutton switches for thick panels •

long bushing Ø 12 mm • momentary

BUILD YOUR PART NUMBER

BASIC PART NUMBER

ELECTRICAL FUNCTION

SERIES

ACTUATOR SHAPES

TERMINALS

CONTACTS

Normally open

Silver, gold

Round, curved

Flying leads

Straight PC

Solder lugs

(NO)

plated

Round, flat

Actuator marking

available on round flat

models (symbol 10 mm

max.). On request.

OPTIONS

BEZEL OPTIONS

ACTUATOR COLORS

LED COLORS

Reduced bezel,

front mounting

Non-illuminated

Blue

Blank

L0S

X1242

234

Super red

Yellow

Dark blue

Reduced bezel,

standard mounting

Black

L0Y

Green

L0G

L0B

L0W

LSG

LYG

Blue

Grey

White

Yellow

Red/green

Yellow/green

Red

White

7/1

Bright chrome

Orange

Satin chrome

ABOUT THIS SERIES

On the following pages, you will find successively basic part numbers of switches and options in the same order as in above chart.

Notice : please note that not all combinations of above numbers are available. Refer to the following pages for further information.

A sealing boot is available to protect the switches against frost and sand (P/N U5125). See "Sealing Boots" section of website.

Mounting accessories : Standard hardware supplied : 1 flat seal (standard bezel) or 1 O-ring (reduced bezel) and 1 metal hex nut 14

mm (.551) across flats. Hex nut part number U166. Plastic nut 17 mm (.669) across flats, thickness 4 mm (.157) available on request. Part

number U4248.

IL series

Sealed pushbutton switches for thick panels •

long bushing Ø 12 mm • momentary

FLAT

ILLUMINATED

Ø12.00

SOLDER LUG TERMINALS

(.472DIA)

Ø17.50

(.688DIA)

Curved actuator

ILR3SAD

Normally open

Ø12.00x0.75SI

10.80

(.425)

(.472DIAx0.75IS)

Flat actuator

EPOXY

ILP3SAD

1.20

0.40

(.047)

(.015)

2.00

5.08

(.078)

(.200)

Also available with straight PC terminals : IL•3PAD

FLAT

ILLUMINATED

SEALED FLYING LEAD TERMINALS

Ø12.00

(.472DIA)

Ø17.50

(.688DIA)

Curved actuator

Normally open

ILR3FAD

Ø12.00x0.75SI

(.472DIAx0.75IS)

10.80

(.425)

Flat actuator

Ø9.50

(.374DIA)

ILP3FAD

FLAT

NON ILLUMINATED

Ø12.00

(.472DIA)

SOLDER LUG TERMINALS

Ø17.50

(.688DIA)

Curved actuator

10.80

(.425)

ILR3SAD

Normally open

Ø12.00x0.75SI

(.472DIAx0.75IS)

Flat actuator

EPOXY

ILP3SAD

1.20

0.40

(.047)

(.015)

2.00

5.08

(.078)

(.200)

Also available with straight PC terminals : IL•3PAD

FLAT

NON ILLUMINATED

Ø12.00

(.472DIA)

FLYING LEAD TERMINALS

Ø17.50

(.688DIA)

Curved actuator

Normally open

ILR3FAD

Ø12.00x0.75SI

(.472DIAx0.75IS)

10.80

(.425)

Flat actuator

Ø9.50

(.374DIA)

ILP3FAD

Wire colors : black : NO contact, red : LED anode(+), blue : LED cathode(-)

IL series

Sealed pushbutton switches for thick panels •

long bushing Ø 12 mm • momentary

REDUCED BEZEL FOR COMPACT

MATRIX MOUNTING - OPTION X1242

• Dia. 15 (.590) reduced bezel

• Mounting from the front into a threaded panel cut-out

• Matrix mounting : 16 x 16 mm (.630x.630)

• Illuminated or non-illuminated

ILP3FAD...X1242

• Same terminal options and colors as standard models

• Part numbers on request.

REDUCED BEZEL FOR COMPACT

MATRIX MOUNTING - OPTION 234

• Dia. 15 (.590) reduced bezel

• Standard panel mounting

ILP3FAD...234

• Matrix mounting : 17.5 x 17.5 mm (.689x.689)

• Illuminated or non-illuminated

• Same terminal options and colors as standard models

• Part numbers on request.

ACTUATOR COLORS

BASIC P/N

Blue

Red

Dark blue

Black

7/1

White

Bright chrome

Orange

Satin chrome

Green

Grey

Yellow

LED COLORS

BASIC P/N

Blank Non-illuminated

L0S

L0Y

L0G

L0B

L0W

LSG

LYG

Super Red

Yellow

Green

Blue

White

Red/green

Yellow/green

相关型号：