IN-S128TATRGB [ETC]
LED RGB CLEAR 1210 SMD;
ETC 
IN-S128TATRGB
Top View SMD LED 1210 PCB Type
Features
Description
•
•
•
•
•
•
1210 1.1mm SMD LED
The IN-S128TATRGB is a popular 1210 top view RGB
package with versatile design capabilities. It is a PCB
type molding style LED which can be used in various
applications.
High Brightness
AlInGaP / InGaN Technology
Side View
High reliability
Clear Lens
Recommended Solder Pattern
Applications
•
•
•
•
Consumer Electronics
Wearables
Automobile After Market
Industrial Equipment
Figure 1. IN-S128TATRGB Solder Pattern
Package Dimensions in mm
Figure 2. IN-S128TATRGB Package Dimensions
Inolux Corporation
May 12, 2017
www.inolux-corp.com
Page 1
Proprietary & Confidential
IN-S128TATRGB
Top View SMD LED 1210 PCB Type
Absolute Maximum Rating at 25oC (Note 1)
Emission
Color
TOP (oC)
TST (oC)
Pd (mW)
IF (mA)
IFP* (mA)
VR (V)
Product
Red
75
75
75
25
25
25
60
IN-S128TATRGB
Green
Blue
100
100
5
-30~+85
-40~+90
Notes
1. Condition for IFP is pulse of 1/10 duty and 0.1msec width
ESD Precaution
ATTENTION: Electrostatic Discharge (ESD) protection
The symbol above denotes that ESD precaution is needed. ESD protection for GaP and AlGaAs based chips is necessary even
though they are relatively safe in the presence of low static-electric discharge. Parts built with AlInGaP, GaN, or/and InGaN based
chips are STATIC SENSITIVE devices. ESD precaution must be taken during design and assembly.
If manual work or processing is needed, please ensure the device is adequately protected from ESD during the process.
Please be advised that normal static precautions should be taken in the handling and assembly of this device to prevent damage or degradation
which may be induced by electrostatic discharge (ESD).
Electrical Characteristics TA = 25°C (Note 1)
Viewing
VF(V)
λ(nm)
I*V(mcd)
Angle
IF
Emission
Color
Product
(mA)
Min.
Max
typ.
2.2
3.2
3.2
max
λD
λP
△λ
20
35
30
2θ1/2
Red
Green
Blue
20
20
20
2.6
3.6
3.6
625
520
465
636
521
464
130
130
130
150
210
125
200
600
180
IN-S128TATRGB
Notes
1. Performance guaranteed only under conditions listed in above tables.
Inolux Corporation
May 12, 2017
www.inolux-corp.com
Page 2
Proprietary & Confidential
IN-S128TATRGB
Top View SMD LED 1210 PCB Type
Typical Characteristic Curves – YG, Y, A, R
Inolux Corporation
May 12, 2017
www.inolux-corp.com
Page 3
Proprietary & Confidential
IN-S128TATRGB
Top View SMD LED 1210 PCB Type
Typical Characteristic Curves – B, G, W
Inolux Corporation
May 12, 2017
www.inolux-corp.com
Page 4
Proprietary & Confidential
IN-S128TATRGB
Top View SMD LED 1210 PCB Type
Typical Characteristic Curves – Radiation Pattern
Ordering Information
Forward
Voltage
VF (V)
Luminous Intensity
IV (mcd)
Emission
Test Current
IF (mA)
Orderable
Part Number
Product
Color
Technology
(Typ.)
(Typ.)
Red
AllnGaP
InGaN
InGaN
20
20
20
200
600
180
2.2
3.2
3.2
IN-S128TATRGB
Green
Blue
IN-S128TATRGB
Inolux Corporation
May 12, 2017
www.inolux-corp.com
Page 5
Proprietary & Confidential
IN-S128TATRGB
Top View SMD LED 1210 PCB Type
Label Specifications
Inolux P/N:
I
N
-
S
1
2
8
T
A
T
R
G
B
-
X
X
X
X
Customized
Stamp-off
Material
Package
Variation Orientation
Current
Lens
Color
R=636nm
G=521nm
B=464nm
Inolux
SMD
S = PCB
Type
128TA = 3.2 x 2.7 x 1.1mm
Tri-Chip
T =
Top Mount
(Blank) =
20mA
(Blank) =
Clear
Lot No.:
Z
2
0
1
7
01
24
001
Internal
Tracker
Year (2017, 2018, …..)
Month
Date
Serial
Inolux Corporation
May 12, 2017
www.inolux-corp.com
Page 6
Proprietary & Confidential
IN-S128TATRGB
Top View SMD LED 1210 PCB Type
Packaging Information: 3000pcs Per Reel
Tape Dimension
Unit: mm Tolerance: +/-0.10 mm
Reel Dimension
Unit: mm Tolerance: +/-0.15mm
Inolux Corporation
May 12, 2017
www.inolux-corp.com
Page 7
Proprietary & Confidential
IN-S128TATRGB
Top View SMD LED 1210 PCB Type
Packing Dimension
5 boxes per carton are available depending on shipment quantity.
Specification
Material
Quantity
Carrier tape
Reel
Label
Per EIA 481-1A specs
Per EIA 481-1A specs
IN standard
Conductive black tape
Conductive black
Paper
3000pcs per reel
Packing bag
Carton
220x240mm
IN standard
Aluminum laminated bag/ no-zipper
Paper
One reel per bag
Non-specified
Others:
Each immediate box consists of 5 reels. The 5 reels may not necessarily have the same lot number or the same
bin combinations of Iv, λD and Vf. Each reel has a label identifying its specification; the immediate box consists
of a product label as well.
Inolux Corporation
May 12, 2017
www.inolux-corp.com
Page 8
Proprietary & Confidential
IN-S128TATRGB
Top View SMD LED 1210 PCB Type
Dry Pack
All SMD optical devices are MOISTURE SENSITIVE. Avoid exposure to moisture at all times during
transportation or storage. Every reel is packaged in a moisture protected anti-static bag. Each bag is properly
sealed prior to shipment.
Upon request, a humidity indicator will be included in the moisture protected anti-static bag prior to shipment.
The packaging sequence is as follows:
Reflow Soldering
•
•
Recommended tin glue specifications: melting temperature in the range of 178~192 OC
The recommended reflow soldering profile is as follows (temperatures indicated are as measured on
the surface of the LED resin):
Lead-free Solder Profile
Inolux Corporation
May 12, 2017
www.inolux-corp.com
Page 9
Proprietary & Confidential
IN-S128TATRGB
Top View SMD LED 1210 PCB Type
Precautions
•
•
•
Avoid exposure to moisture at all times during transportation or storage.
Anti-Static precaution must be taken when handling GaN, InGaN, and AlInGaP products.
It is suggested to connect the unit with a current limiting resistor of the proper size. Avoid applying a
reverse voltage.
•
•
•
Avoid operation beyond the limits as specified by the absolute maximum ratings.
Avoid direct contact with the surface through which the LED emits light.
If possible, assemble the unit in a clean room or dust-free environment.
Reworking
•
•
•
Rework should be completed within 5 seconds under 260 OC.
The iron tip must not come in contact with the copper foil.
Twin-head type is preferred.
Cleaning
Following are cleaning procedures after soldering:
•
•
•
•
An alcohol-based solvent such as isopropyl alcohol (IPA) is recommended.
Temperature x Time should be 50oC x 30sec. or <30oC x 3min
Ultra sonic cleaning: < 15W/ bath; bath volume ≤ 1liter
Curing: 100 OC max, <3min
Cautions of Pick and Place
• Avoid stress on the resin at elevated temperature.
•
Avoid rubbing or scraping the resin by any object.
•
Electro-static may cause damage to the component. Please ensure that the equipment is properly
grounded. Use of an ionizer fan is recommended.
Inolux Corporation
May 12, 2017
www.inolux-corp.com
Page 10
Proprietary & Confidential
IN-S128TATRGB
Top View SMD LED 1210 PCB Type
Reliability
Frequency/ lots/ samples/ Standards
Conditions
Item
failures
Reference
For all reliability
monitoring tests according
to JEDEC Level 2
1Q/ 1/ 22/ 0
J-STD-020
1.) Baking at 85°C for 24hrs
2.) Moisture storage at 85°C/ 60% R.H. for
168hrs
Accelerated aging 155°C/ 24hrs
Tinning speed: 2.5+0.5cm/s
Tinning: A: 215°C/ 3+1s or B: 260°C/ 10+1s
Dipping soldering terminal only
Soldering bath temperature
A: 260+/-5°C; 10+/-1s
Precondition
Solderability
JESD22-B102-B
And CNS-5068
CNS-5067
Resistance to
soldering heat
B: 350+/-10°C; 3+/-0.5s
1.) Precondition: 85°C bakin g for 24hrs
85°C/ 60%R.H. for 168hrs
2.) Tamb25°C; IF=20mA; duration 1000hrs
Tamb: 85°C
Humidity: 85% R.H., IF=5mA
Duration: 1000hrs
Tamb: 55°C
1Q/ 1/ 40/ 0
1Q/ 1/ 45/ 0
1Q/ 1/ 20
CNS-11829
JESD-A101-B
IN specs.
Operating life test
High humidity,
high temperature
bias
High temperature
bias
IF=20mA
Duration: 1000hrs
1Q/ 1/ 40/ 0
Tamb25°C, If=20mA,, Ip=100mA, Duty
cycle=0.125 (tp=125μs,T=1sec)
Duration 500hrs)
Pulse life test
1Q/ 1/ 76/ 0
1Q/ 1/ 40/ 0
JESD-A104-A
IEC 68-2-14, Nb
A cycle: -40 degree C 15min; +85 degree C
15min
Thermal steady within 5 min..
300 cycles
2 chamber/ Air-to-air type
60+3°C
Temperature
cycle
High humidity
storage test
CNS-6117
CNS-554
CNS-6118
90+5/-10% R.H. for 500hrs
100+10°C for 500hrs
High temperature 1Q/ 1/ 40/ 0
storage test
Low temperature 1Q/ 1/ 40/ 0
storage test
-40+5°C for 500hrs
Inolux Corporation
Proprietary & Confidential
May 12, 2017
www.inolux-corp.com
Page 11
IN-S128TATRGB
Top View SMD LED 1210 PCB Type
Revision History
Changes since last revision
Initial Release
Page
Version No.
Revision Date
05-12-2017
1.0
DISCLAIMER
INOLUX reserves the right to make changes without further notice to any products herein to improve reliability, function or design. INOLUX does not
assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent
rights, nor the rights of others.
LIFE SUPPORT POLICY
INOLUX’s products are not authorized for use as critical components in life support devices or systems without the express written approval of the
President of INOLUX or INOLUX CORPORATION. As used herein:
1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life,
and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to
result in a significant injury of the user.
2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or system, or to affect its safety or effectiveness.
Inolux Corporation
May 12, 2017
www.inolux-corp.com
Page 12
Proprietary & Confidential
相关型号：
©2020 ICPDF网 联系我们和版权申明