LC1F1504 [ETC]
TeSys⢠IEC-Style Contactors and Starters;
| 型号： | LC1F1504 |
| 厂家： | 
ETC |
| 描述： | TeSys⢠IEC-Style Contactors and Starters |
| 文件： | 总252页 (文件大小：13351K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TeSys™ IEC-Style
Contactors and Starters
Catalog
File 8502
04
CONTENTS
Description
Page
TeSys IEC Contactors and Starters Selection Guide. . . . . . . . . . . . . . . . . . . . . . . . . . 3
TeSys K-line Mini-contactors, Overload Relays, and Accessories . . . . . . . . . . . . . . 37
TeSys D-line Contactors, Enclosed Starters Overload Relays, and Accessories. . . 77
TeSys F-line Contactors, Overload Relays, and Accessories. . . . . . . . . . . . . . . . . 179
Catalog Number Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 247
TeSys™ IEC-Style
Contactors and Starters
Selection Guide
Catalog
File 8502
Selection Guide
04
CONTENTS
Description
Page
Technical Information
Product Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Product Approvals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Protective Treatment According to Climatic Environment . . . . . . . . . . . . . . . . . . . . 10
Degrees of Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Kilowatt Motor Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Horsepower Motor Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Contactor Selection Guide
Definitions of Utilization Categories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Contactor Selection Guide for Utilization Category AC-3 . . . . . . . . . . . . . . . . . . . . . 18
Contactor Selection Guide for Utilization Category AC-1 . . . . . . . . . . . . . . . . . . . . . 22
Contactor Selection Guide for Utilization Category AC-2 and AC-4 . . . . . . . . . . . . .24
Contactor Selection Guide for Utilization Category DC-1 to DC-5 . . . . . . . . . . . . . . 28
Voltage Code Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Definitions and Comments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
TeSys™ IEC-Style Contactors and Starters Selection Guide
Technical Information: Product Standards
Technical Information: Product Standards
Conformity to Standards
The Telemecanique D-Line, F-line, and K-line contactors, overload relays and accessories satisfy most
national, European, and international standards for promoting worldwide product acceptance. These
product standards precisely define the performance of the designated products (such as IEC 60947 for
low voltage equipment).
When used correctly, as designated by the manufacturer and in accordance with the regulations and
rules of the art, these products will allow assembled equipment, machine systems or installations to
conform to their appropriate standards (for example: IEC 60204, relating to electrical equipment used
on industrial machines).
Telemecanique is able to provide proof of conformity of its production, in accordance with the standards
selected by ourselves, due to our quality assurance system. On request, and depending on the situation,
Telemecanique can provide the following:
•
•
•
A declaration of conformity.
A certificate of conformity (ASEFA/LOVAG).
An approval certificate or agreement, in the countries where this procedure is required or for
particular specifications, such as those existing in the merchant marine.
Code
ANSI
BS
Standards Body - Name
American National Standards Institute
British Standards Institution
Abbreviation
ANSI
Country
USA
BSI
Great Britain
Italy
CEI
Comitato Electtrotechnico Italiano
Verband Deutscher Electrotechniker
Comité Européen de Normalisation Electrotechnique
Gosudarstvenne Komitet Standartov
International Electrotechnical Commission
Japanese Industrial Standard
CEI
DIN/VDE
EN
VDE
Germany
Europe
CENELEC
GOST
IEC
GOST
IEC
Russia
Worldwide
Japan
JIS
JISC
NBN
NEN
NFC
SAA
UNE
Institut Belge de Normalisation
IBN
Belgium
Netherlands
France
Nederlands Normalisatie Institut
NNI
Union Technique de l'Electricité
UTE
Standards Association of Australia
Instituto Nacional de Racionalizacion y Normalizacion
SAA
Australia
Spain
IRANOR
European EN Standards
This is a group of technical specifications established in conjunction with, and approval of, the relative
bodies within the various CENELEC member countries (EEC and EFTA). Arrived at by the principal of
consensus, the European standards are the result of a majority vote. Such adopted standards are then
integrated into the national collection of standards, and contradictory national standards are withdrawn.
The European standards are now incorporated within the French standards and carry the prefix NF EN.
Under the “Technical Union of Electricity” (UTE), the French version of the corresponding European
standard carries a double notation: European reference (NF EN …) and classification (C …).
In addition, the standard NF EN 60947-4-1 relating to motor contactors and starters, effectively
constitutes the French version of the European standard EN 60947-4-1 and carries the UTE
classification C 63-110. This standard is identical to the British standard BS EN 60947-4-1 and the
German standard DIN VDE 0660 Teil 102. Whenever reasonably practical, European standards reflect
international standards (IEC).
For automation system components and distribution equipment, Telemecanique supplements the
requirements of the French NF standards with those necessary for all other major industrial countries.
European Directives
The opening of the European market assumes a harmonization of the regulations pertaining to each
member country of the European Community. The purpose of the European Directive is the elimination
of obstacles hindering the free circulation of goods within the European Community, and its application
applies to each member country.
Member countries are obliged to transcribe each Directive into their national legislation and to
simultaneously withdraw any contradictory regulation. The Directives, in particular those of a technical
content concerning us here, only establish the objectives to be obtained and are referred to as “essential
requirements.”
4
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ IEC-Style Contactors and Starters Selection Guide
Technical Information: Product Standards
The manufacturer is obliged to ensure that all measures are taken to provide conformity to the
regulations of the particular Directive applicable to his product. As a general rule, the manufacturer
certifies conformity to the essential requirements of the Directive(s) for the product by affixing a CE
marking. The CE marking will be affixed to Telemecanique products progressively throughout the
transition period, as defined by the French and European regulations.
Significance of the CE marking:
•
The CE marking is affixed to a product to signify that the manufacturer certifies that the product
conforms to the relevant European Directive(s) and is obligatory for a product, subject to one or more
of the European Directives, before it can be freely distributed within the European Community.
•
•
The CE marking is intended solely for national market control authorities.
The CE marking must not be confused with a conformity marking.
For electrical equipment, only conformity to standards signifies that the product is suitable for its
designated function, and only the guarantee of an established manufacturer can provide a high level of
quality assurance. For Telemecanique labelled products, one or several Directives are liable to be
applied, in particular:
•
The Low Voltage Directive 73/23/EEC amended by the Directive 93/68/EEC: the CE marking relating
to this Directive could not be affixed before 1 January 1995 but was obligatory as of January 1, 1997.
•
The Electromagnetic Compatibility Directive 89/336/EEC, amended by the Directives 92/31/EEC and
93/68/EEC: the CE marking on products covered by this Directive is obligatory from 1 January 1996.
ASEFA-LOVAG Certification
The function of ASEFA (Association des Stations d'Essais Française d'Appareils électriques —
Association of French Testing Stations for Low Voltage Industrial Electrical Equipment) is to carry out
tests for conformity to standards and to issue certificates and test reports. ASEFA laboratories are
authorized by the National Testing Network (RNE).
ASEFA is now effectively a member of the European accord group LOVAG (Low Voltage Agreement
Group). This means that any certificates issued by LOVAG/ASEFA are recognized by all the authorities
forming the membership of the group and carry the same validity as those issued by any of the member
authorities.
Quality Labels
When components can be used in domestic and similar applications, it is sometimes necessary to
obtain a “quality label,” which is a form of certification of conformity.
Code
Quality Label
Comité Electrotechnique Belge
Country
Belgium
Netherlands
France
CEBEC
KEMA-KEUR
NF-USE
ÖVE
Keuring van Electrotechnische Materialen
Union Technique de l'Electricité
Österreichischer Verband für Electrotechnik
Svenska Electriska Materiel Kontrollanatalten
Austria
SEMKO
Sweden
Approvals
In some countries, the approval of certain electrical equipment is required by law. In this case, an
approval certificate is issued by the official test authority. Each approved component must bear the
relevant quality label when this is mandatory.
Code
ASE
Approval Authority
Country
Switzerland
Canada
Denmark
Finland
Association Suisse des Electriciens
Canadian Standards Association
Danmarks Elektriske Materielkontrol
Sähkötarkastuskeskus Elinspektions Centralen (SETI)
Norges Elektriske Materiellkontroll
Underwriters Laboratories Inc.
CSA
DEMKO
FI
NEMKO
UL
Norway
USA
5
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ IEC-Style Contactors and Starters Selection Guide
Technical Information: Product Approvals
Technical Information: Product Approvals
Note on approvals issued by the Underwriters Laboratories Inc. (UL) that there are two levels of approval:
Level of Approval
Symbol
Description
The component is fully approved for inclusion in equipment built in a workshop, where the operating limits are known by the equipment manufacturer,
and where its use within such limits is acceptable by Underwriters Laboratories Inc.The component is not approved as a “product for general use”
because its manufacturing characteristics are incomplete or its application possibilities are limited. A “Recognized” component does not necessarily
carry the approval symbol.
“Recognized”
The component conforms to all the requirements of the classification applicable to it and may therefore be used both as a “product for general use”
and as a component in assembled equipment. A “Listed” component must carry the approval symbol.
“Listed”
Marine Classification Authorities
Prior approval by certain marine classification authorities is generally required for electrical equipment
which is intended for use on board merchant vessels.
Code
BV
Classification authority
Bureau Veritas
Country
France
DNV
GL
Det Norske Veritas
Norway
Russia
Germanischer Lloyd
Lloyd's Register of Shipping
Nippon Kaiji Kyokaï
LROS
NKK
RINA
RRS
Great Britain
Japan
Registro Italiano Navale
Register of Shipping
Italy
Russia
Product Approvals
The table below shows the approvals obtained or pending with the various approvals authorities as of
5/15/1995. For more detailed information, please consult your Local Square D Field Sales Office.
Existing and Pending Approval of Automation System Components (except control and signalling units)
Approvals
Marine Classification Authorities
Quality Labels
Standard Version
X: Approved
O: Approval pending
Special Version
+: Approved
ASE
CSA DEMKO
FI
NEMKO
UL
BV
DNV
GL
LROS
NKK
RINA
Italy
RRS
CIS
KEMA
NF
ÖVE SEMKO
Ø: Approval pending
U.S.A.
Great
Britain
Nether
lands
Switzer
land
Canada Denmark Finland Norway
France Norway Germany
X
Japan
France Austria Sweden
AB1BB, AB1BC
AB1BD
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
AB1DV
X
X
X
X
X
X
X
X
X
X
X
X
AB1FU
X
X
X
X
X
AB1FV
AB1NE, AB1SE
AB1SV
X
X
X
AB1TP
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
AB1TR
AB1VV
X
X
O
X
X
X
X
X
AB3RV
ABA6, ABE6R
ABR1, ABR2
ABS1
X
X
X
X
X
X
X
X
X
X
X
ABS2
X
X
X
X
AK2BA01
AK2BA162U
AK2SB
X
X
X
X
AK3JB4 (CMD)
AK3JB8 (CMD)
X
X
X
X
X
X
X
X
X
X
X
O
O
X
X
6
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ IEC-Style Contactors and Starters Selection Guide
Technical Information: Product Approvals
Existing and Pending Approval of Automation System Components (except control and signalling units)
Approvals
Marine Classification Authorities
Quality Labels
Standard Version
X: Approved
O: Approval pending
Special Version
+: Approved
ASE
CSA DEMKO
FI
NEMKO
UL
BV
DNV
GL
LROS
NKK
RINA
Italy
RRS
CIS
KEMA
NF
ÖVE SEMKO
Ø: Approval pending
U.S.A.
Great
Britain
Nether
lands
Switzer
land
Canada Denmark Finland Norway
France Norway Germany
X
Japan
France Austria Sweden
AK5
X
O
X
X
X
X
X
X
X
X
O
X
X
X
X
X
X
X
X
X
X
X
X
X
ATP
ATS23
ATV16, ATV66
CA2D
X
X
X
X
X
X
X
X
X
X
X
X
X
X
O
X
O
X
O
X
O
X
X
O
X
O
X
O
X
X
X
X
X
X
CA2KN
CA3D
O
O
O
O
O
O
O
O
O
CA3KN
CA4D
O
CA4KN
CCX 17
DF6
X
O
O
X
DK1
X
X
FTX 417
FTX 117
GB2CB
GB2CD
GC1■
O
O
X
X
O
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
GC3
GD2
GV2M■
GV2P
X
X
X
X
X
X
X
X
X
X
X
X
O
X
X
GV3
X
GV7R
O
O
O
O
O
GY1■
X
X
X
X
X
GY3
LA1D
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
O
O
X
X
O
X
X
O
X
X
X
X
X
O
X
O
O
X
X
O
X
X
X
O
O
O
O
X
O
O
O
X
X
O
X
X
X
O
X
X
X
X
X
X
X
X
O
X
O
X
X
X
X
X
X
LA1KN
LA1LB
LA1LC
LA2D, LA3D
LA2K, LA4K
LA4D
O
X
X
X
X
X
X
X
X
X
O
X
X
O
X
X
X
X
X
O
X
O
O
O
O
O
O
X
X
X
O
O
O
O
X
X
X
X
LA8D
X
X
X
X
X
LB•LB
X
X
X
X
X
X
X
X
O
X
O
X
X
X
X
X
X
X
LB•LC
LB•LD
LC1D
X
X
X
X
X
X
X
X
X
X
X
X
O
O
O
O
O
O
O
X
O
O
O
O
O
O
O
X
LC2D
LC1F
LC1K
X
X
LC2F
LC2K, LC7K, LC8K
LD1LB
LD1LC
X
X
X
X
X
X
X
X
7
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ IEC-Style Contactors and Starters Selection Guide
Technical Information: Product Approvals
Existing and Pending Approval of Automation System Components (except control and signalling units)
Approvals
Marine Classification Authorities
Quality Labels
Standard Version
X: Approved
O: Approval pending
Special Version
+: Approved
ASE
CSA DEMKO
FI
NEMKO
UL
BV
DNV
GL
LROS
NKK
RINA
Italy
RRS
CIS
KEMA
NF
ÖVE SEMKO
Ø: Approval pending
U.S.A.
Great
Britain
Nether
lands
Switzer
land
Canada Denmark Finland Norway
X
France Norway Germany
Japan
France Austria Sweden
LD1LD
X
X
X
X
X
X
X
X
X
X
X
X
O
X
X
X
X
X
X
X
O
X
X
X
X
X
X
X
X
X
X
X
X
X
O
X
X
LD4LC
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
O
X
X
X
LD4LD
LD5LB
LD5LC
X
X
X
X
X
X
LD5LD
LE1D
X
LN1D
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
O
X
O
LP1D
X
X
X
X
X
X
X
O
X
O
X
O
X
O
X
X
X
O
X
O
X
O
O
O
O
O
O
O
O
X
X
O
O
O
O
O
O
O
X
LP1K
X
X
X
X
O
O
O
LP2D
LP2K
O
LP4D
X
X
LP4K
X
X
O
O
LP5D
LP5K
O
X
X
X
O
O
X
X
X
O
O
X
X
X
O
LR1F
X
X
X
LR2D
X
O
O
O
O
O
O
LR2F
LR2K
LR9F
LS1D
X
X
LT2S
X
X
X
X
X
X
X
X
X
X
X
LT7F
X
X
X
LT8
X
RE1LA, RE1LC
RE4, RE5
RH•
X
X
X
X
X
X
X
RM1XA
RM3
X
RS1, RS2
RTV74, RTV84
RXN, RUW
TSX 07
TSX 1710/20
K1, K2
O
O
X
X
X
X
X
+
O
O
X
X
X
X
X
+
O
O
X
X
X
X
X
X
X
X
X
XA2B, BV, BW
XACA (small hoist)
XACA (all applications)
XACB
X
X
X
X
X
X
X
X
X
X
X
X
X
+
XACM
XALB, XALJ, XALN
XAPA
X
X
X
X
X
+
+
X
X
X
X
X
X
+
X
X
XAPM
+
X
XASE, XASP
8
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ IEC-Style Contactors and Starters Selection Guide
Technical Information: Product Approvals
Existing and Pending Approval of Automation System Components (except control and signalling units)
Approvals
Marine Classification Authorities
Quality Labels
Standard Version
X: Approved
O: Approval pending
Special Version
+: Approved
Ø: Approval pending
ASE
CSA DEMKO
FI
NEMKO
UL
BV
DNV
GL
LROS
NKK
RINA
Italy
RRS
CIS
KEMA
NF
ÖVE SEMKO
U.S.A.
Great
Britain
Nether
lands
Switzer
land
Canada Denmark Finland Norway
France Norway Germany
Japan
France Austria Sweden
XBLA
X
X
+
X
X
+
XBTA, XBTK, KL, KN
XBTB, XBTC
X
X
XBTH, XBTP, XBTE,
XBTHM
X
X
XBTM, ML
X
+
X
+
X
O
X
XBTVA
XB2B (pushbuttons)
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
XB2BV, BW (direct)
(via transformer)
X
X
X
XB2BV, BW (reducer)
XB2EV
X
X
X
X
X
X
XB2M (pushbuttons)
X
X
X
X
X
X
X
X
X
X
X
XB2MW (direct)
(via transformer)
+
+
XDA, XDL
XD2A, XD2C, XD2E
XD2PA, XD2GA
XPEA
X
+
X
X
X
X
X
X
X
X
X
XPEM
+
X
X
X
+
XVAC, XVAL
XVLA
X
XY2CB, XY2CH
XY2CE
+
ZA2VA
X
X
ZB2MW (direct)
(via transformer)
+
X
X
X
+
X
X
9
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ IEC-Style Contactors and Starters Selection Guide
Technical Information: Protective Treatment / Climatic Environment
Technical Information: Protective Treatment According to Climatic Environment
Depending on the climatic and environmental conditions in which the equipment is placed,
Telemecanique can offer specially adapted products to meet your requirements.
In order to make the correct choice of protective finish, two points should be remembered:
•
•
The prevailing climate of the country is never the only criterion.
Only the atmosphere in the immediate vicinity of the equipment should be considered.
“TC” Treatment for All Climates
“TC” is the standard treatment for Telemecanique equipment and is suitable for the vast majority of
applications. It is the equivalent of treatments described as “Klimafest,” “Climateproof,” “Total
Tropicalization,” or “Super Tropicalization,” and meets the following requirements:
•
Publication UTE C 63-100 (method l), successive cycles of humid heat at + 40 °C (104 °F) and
95% relative humidity.
•
DIN 50016 — Variations of ambient conditions within a climatic chamber:
+ 23 °C (73 °F) and 83% relative humidity,
+ 40 °C (104 °F) and 92% relative humidity.
It also meets the requirements of the marine classification authority BV-LROS-GL-DNV-RINA.
Characteristics
•
Steel components are usually treated with zinc chromate and, when they have a mechanical function,
they may also be painted.
•
•
Insulating materials are selected for their high electrical, dielectric and mechanical characteristics.
Metal enclosures have a stoved paint finish, applied over a primary phosphate protective coat, or are
galvanized (for example, some prefabricated busbar trunking components).
Limits for Use of “TC” (All Climates) Treatment
•
•
“TC” treatment is suitable for the following temperatures and humidity:
Temperature
20 °C (68 °F)
95%
40 °C (104 °F)
80%
50 °C (122 °F)
50%
Relative Humidity
It may also be used where the above limits are only exceeded accidentally or for very short periods,
or where temperature variations are not sufficient or fast enough to cause heavy condensation or
dripping water on the equipment. “TC” treatment is therefore suitable for all latitudes, including
tropical and equatorial regions, where the equipment is mounted in normal, ventilated industrial
locations. Being sheltered from external climatic conditions, temperature variations are small, the risk
of condensation is minimized, and the risk of dripping water is virtually non-existent.
Extension of Use of “TC” (All Climates) Treatment
In cases where the humidity around the equipment exceeds the conditions described above, where the
equipment (in tropical regions) is mounted outdoors, or where it is placed in a very humid location
(laundries, sugar refineries, steam rooms, and so forth), “TC” treatment can still be used if the following
precautions are taken:
•
The enclosure in which the equipment is mounted must be protected with a “TH” finish (see page 11)
and must be well ventilated to avoid condensation and dripping water (for example, enclosure base
plate mounted on spacers).
•
•
Components mounted inside the enclosure must have a “TC” finish.
If the equipment is to be switched off for long periods, a heater must be provided (0.2 to 0.5 kW per
square decimeter / 15.5 square inch of enclosure), switched on automatically when the equipment is
turned off. This heater keeps the inside of the enclosure at a temperature slightly higher than the
outside surrounding temperature, thereby avoiding any risk of condensation and dripping water (the
heat produced by the equipment itself in normal running is sufficient to provide this temperature
difference).
10
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ IEC-Style Contactors and Starters Selection Guide
Technical Information: Protective Treatment / Climatic Environment
•
For pilot devices, the use of “TC” treatment can be extended to outdoor use provided the enclosure
is made of light alloys, zinc alloys, or plastic material. In this case, it is essential to ensure that the
degree of protection against penetration of liquids and solid objects is suitable for the applications
involved.
“TH” Treatment for Hot and Humid Environments
This treatment is for hot and humid atmospheres where installations are subject to condensation,
dripping water, and the risk of fungi.
Plastic insulating components are also resistant to attacks from insects such as termites and
cockroaches. These properties have led to this treatment being described as “Tropical Finish,” but this
does not mean that all equipment installed in tropical and equatorial regions must have undergone “TH”
treatment. On the other hand, certain operating conditions in temperate climates may well require the
use of “TH”-treated equipment (see the Limits for Use of “TC” Treatment section on page 10).
The following are special characteristics of “TH” treatment:
•
All insulating components are made of materials which are either resistant to fungi or treated with a
fungicide, having increased resistance to creepage (Standards IEC 112, NF C 26-220, DIN 5348).
•
Metal enclosures receive a top-coat of baked, fungicidal paint, applied over a rust inhibiting
undercoat. Components with “TH” treatment may be subject to a surcharge (a large number of
Telemecanique products are “TH” treated as standard and are, therefore, not subject to a price
surcharge). Please consult our local representatives or agents.
Protective Treatment Selection Guide
Internal Heating of
Enclosure when
Not in Use
Protective Treatment of
Environmental
Conditions
Location
Duty Cycle
Type of Climate
Components
Enclosure
No dripping water
or condensation
Unimportant
Unnecessary
No
Unimportant
“TC”
“TC”
Temperate
Equatorial
Unimportant
Unimportant
Temperate
Equatorial
Temperate
Equatorial
Unimportant
Unimportant
“TC”
“TH”
“TC”
“TC”
“TC”
“TH”
“TC”
“TH”
“TC”
“TC”
“TH”
“TH”
“TH”
“TH”
“TC”
“TH”
“TH”
“TH”
“TH”
“TH”
Frequent
Indoors
switching off
for periods of
more than 1 day
Presence of
dripping water
or condensation
Yes
Continuous
Unimportant
Unnecessary
Outdoors
(sheltered)
No dripping water
or dew
Unnecessary
No
Frequent
Frequent and
regular presence
of dripping water
or dew
switching off
for periods of
more than 1 day
Exposed
outdoors, or
near the sea
Yes
Continuous
Unnecessary
These treatments cover, in particular, the applications defined by methods I and II of guide UTE C 63-100.
Special Precautions for Electronic Equipment
Electronic products always meet the requirements of “TC” treatment. A number of them are “TH”-treated
as standard.
Some electronic products (for example, programmable controllers, flush-mountable controllers CCX,
and flush-mountable operator terminals XBT) necessitate the use of an enclosure providing a degree of
protection to at least IP 54 (as defined by the standards IEC 60664 and NF C 20 040) for use in industrial
applications or in environmental conditions requiring a “TH” treatment.
These electronic products, including flush-mountable products, must have a degree of protection to at
least IP 20 (either provided by the enclosure itself or following installation) for restricted access locations
where the degree of pollution does not exceed 2 (a test booth not containing machinery or other dust
producing activities, for example).
11
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ IEC-Style Contactors and Starters Selection Guide
Technical Information: Degrees of Protection
Technical Information: Degrees of Protection
IEC Publication 60529 Classification of Degrees of Protection Provided by Enclosures provides a
system for specifying the enclosures of electrical equipment on the basis of the degree of protection
provided by the enclosure. IEC 60529 does not specify degrees of protection against mechanical
damage of equipment, risk of explosions, or conditions such as moisture (produced, for example, by
condensation), corrosive vapors, fungi, or vermin. NEMA Standards Publication 250, and UL 50
Standard does test for environmental conditions such as corrosion, rust, icing, oil, and coolants. For this
reason, and because tests and evaluations for other characteristics are not identical, the IEC Enclosure
Classification Designations cannot be exactly equated with NEMA Enclosure Type Numbers.
The IEC designation consists of the letters IP followed by, usually, two numerals (for example IP 55). The
first characteristic numeral indicates the degree of protection provided by the enclosure with respect to
persons and solid foreign objects entering the enclosure. The second characteristic numeral indicates
the degree of protection provided by the enclosure with respect to the harmful ingress of water. See the
tables below and on page 13 for what the two numbers mean.
In addition, a single-digit letter may follow the two numerals (for example, IP 20C). This letter indicates
that the actual protection of personnel against direct contact with live parts is better than that indicated
by the first numeral. So this example (IP 20C) indicates that the device is finger-safe (the ‘2’) and tool-
safe (the ‘C’) for tools 2.5 mm (or larger) in diameter. See the table on page 13 for what letters are
permissible and what each indicates.
Finally, a third numeral may sometimes appear and corresponds to the degree of protection against
mechanical impact. In accordance with standard NF C 20-010, the third numeral may either follow the
two IP numerals (for example, IP 55-9) or be shown separately from the IP code. This numeral also
corresponds to an external factor classification as defined in standard NF C 15-100. See the table on
page 13 for what numbers are permissible and what each indicates.
NOTE: Any characteristic numeral which is unspecified is replaced by an X (for example, IP XXB).
IEC 60529 Classification Designations — First Characteristic Numeral
First Characteristic Numeral
Protection of the Equipment
Protection of Personnel
Corresponds to protection of the equipment against
penetration of solid objects and protection of personnel against
direct contact with live parts.
0
Not protected
Not protected
Ø 50 mm
Protected against direct contact with the back of the hand
(accidental contacts).
Protected against the penetration of solid objects having a
diameter greater than or equal to 50 mm (2”).
1
Ø 12. 5 mm
Protected against direct finger contact.
Protected against the penetration of solid objects having a
diameter greater than or equal to 12.5 mm (0.5”).
2
Ø 2,5 mm
Protected against direct contact with a 2.5-mm (0.1”) diameter
tool.
Protected against the penetration of solid objects having a
diameter greater than or equal to 2.5 mm (0.1”).
3
Ø 1 mm
Protected against direct contact with a 1mm (0.04”) diameter
wire.
Protected against the penetration of solid objects having a
diameter greater than 1 mm (0.04”).
4
5
6
Protected against direct contact with a 1mm (0.04”) diameter
wire.
Dust-protected (no harmful deposits).
Protected against direct contact with a 1mm (0.04”) diameter
wire.
Dust-tight.
12
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ IEC-Style Contactors and Starters Selection Guide
Technical Information: Degrees of Protection
IEC 60529 Classification Designations — Second and Third Characteristic Numerals
Second Characteristic Numeral
Additional Letter
Third Characteristic Numeral
Corresponds to protection of equipment against penetration of Corresponds to protection of personnel against direct contact Corresponds to the degree of protection against mechanical
water with harmful effects.
with live parts.
impact. This numeral also corresponds to an external factor
classification as defined in standard NF C 15-100.
0
1
Non-protected
A
B
With the back of the hand.
0
Non-protected
150 g (0.33 lb)
Protected against
vertical dripping water
(condensation).
Impact energy: at least
equal to 0.25 N•m (external
classification factor AG1).
With the finger.
1
15 cm
(6")
250 g (0.55 lb)
Protected against dripping
water at an angle of up to
15°.
Impact energy: at least
equal to 0.375 N•m.
2
3
C
D
With a 2.5-mm (0.1”) diameter tool.
2
3
15 cm
(6")
250 g (0.55 lb)
Protected against rain at an
angle of up to 60°.
Impact energy: at least
equal to 0.5 N•m.
20 cm
(8")
With a 1mm (0.04”) diameter wire.
4
5
500 g
(1.1 lb)
40 cm
(16")
Protected against splashing
water in all directions.
Impact energy: at least
equal to 0.5 N•m.
5
7
Impact energy: at least
equal to 6 N•m (external
classification factor AG3).
1.5 kg
(3.3 lb)
Protected against water jets
in all directions.
40 cm
(8")
Impact energy: at least
equal to 20 N•m (external
classification factor AG4).
5 kg
(11 lb)
Protected against powerful
jets of water and waves.
40 cm
(8")
6
7
9
15 cm
(6")
min
Protected against the
effects of temporary
immersion.
8
Protected against the
effects of prolonged
immersion under specified
conditions.
The table below provides an equivalent conversion from NEMA Enclosure Type Numbers to IEC
Enclosure Classification Designations. The NEMA Types meet or exceed the test requirements for the
associated IEC Classifications; for this reason this table cannot be used to convert from IEC
Classifications to NEMA Types.
Conversion of NEMA Type Numbers to IEC Classification Designations
(cannot be used to convert IEC Classification Designations to NEMA Type Numbers)
IEC Enclosure
Classification Designation
IEC Enclosure
Classification Designation
NEMA Enclosure Type Number
NEMA Enclosure Type Number
1
2
3
3R
3S
IP10
IP11
IP54
IP14
IP54
4 and 4X
5
6 and 6P
12 and 12K
13
IP56
IP52
IP67
IP52
IP54
The comparison is based on tests specified in IEC Publication 60529, and is from NEMA Publication 250.
13
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ IEC-Style Contactors and Starters Selection Guide
Technical Information: Kilowatt Motor Ratings
Technical Information: Kilowatt Motor Ratings
The tables below provide the average full-load currents of squirrel cage motors in accordance with IEC
conventions. These are given only as a guide — they may vary depending on the type of motor and
manufacturer. Refer to the actual motor nameplate for full-load current values.
Single-Phase Motors
3-Phase Motors, 50/60 Hz
Power
220 Vac
240 Vac
Power
230 Vac
400 Vac
415 Vac
440 Vac
500 Vac
690 Vac
Kilowatts
A
A
Kilowatts
0.37
0.55
0.75
1.1
1.5
2.2
3
A
A
A
A
A
A
0.37
0.55
0.75
1.1
1.5
1.8
2.2
3
3.9
3.6
2
0.98
1.5
1.9
2.5
3.4
4.8
6.3
–
–
0.99
1.36
1.68
2.37
3.06
4.42
5.77
–
1
–
5.2
4.8
2.8
3.6
5.2
6.8
9.6
–
–
1.21
1.5
2
–
6.6
6.1
2
–
9.6
8.8
2.5
3.5
5
–
12.7
15.7
18.6
24.3
29.6
34.7
39.8
42.2
44.5
49.5
54.4
11.7
14.4
17.1
22.2
27.1
31.8
36.5
38.7
40.8
45.4
50
2.6
3.8
5
–
–
6.5
–
3.5
–
3.7
4
15.2
–
–
4
8.1
11
8.4
11
7.9
6.5
9
4.9
6.7
9
4.4
5.2
5.5
6
5.5
7.5
9
22
28
–
10.4
13.7
16.9
20.1
26.5
32.8
39
14.8
18.1
21
14
12
17
13.9
18.4
23
10.5
12.1
16.5
20.2
24.2
33
11
42
54
68
80
104
130
154
192
248
312
360
–
21
7
15
28.5
35
28
7.5
18.5
22
35
28.5
33
42
40
30
57
55
51.5
64
45
37
69
66
55
40
45
81
80
76
65
46.8
58
55
100
131
162
195
233
222
285
–
100
135
165
200
240
260
280
–
90
80
75
125
146
178
215
236
256
–
105
129
156
187
207
220
–
75.7
94
90
110
132
–
113
135
–
480
–
160
–
165
–
600
–
200
220
250
280
315
–
352
388
437
–
340
385
425
–
321
353
401
–
281
310
360
–
203
224
253
–
720
840
–
–
555
–
535
–
505
–
445
–
321
–
1080
–
355
–
605
–
580
–
549
–
500
–
350
–
1200
–
400
450
500
560
630
710
800
900
675
–
650
–
611
–
540
–
390
–
1440
–
855
950
1045
1200
–
820
920
1020
1140
1320
1470
780
870
965
1075
1250
1390
680
760
850
960
1100
1220
494
549
605
694
790
880
–
–
–
–
–
–
14
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ IEC-Style Contactors and Starters Selection Guide
Technical Information: Horsepower Motor Ratings
Technical Information: Horsepower Motor Ratings
The table below provides the average full-load currents of squirrel cage motors based on NEC (National
Electrical Code) Tables 430-148, 149, and 150. These values are given only as a guide — they may vary
depending on the type of motor and manufacturer. Refer to the actual motor nameplate for full-load current
values.
110 to 120 Vac
Single Two
220 to 240 Vac f
380 to 415 Vac 440 to 480 Vac
550 to 600 Vac
HP
Three Single Two
Three Single Three Single Two
Three Single Two
Three
Phase Phase Phase Phase Phase Phase Phase Phase Phase Phase Phase Phase Phase Phase
1/10
1/8
1/6
1/4
1/3
1/2
3/4
1
3.0
-
-
1.5
1.9
2.2
2.9
3.6
4.9
6.9
8.0
10.0
12.0
17.0
28.0
40.0
50.0
68.0
88.0
110.0
136.0
176.0
216.0
-
-
-
-
-
1.0
1.2
1.4
1.8
2.3
3.2
4.5
5.1
6.4
7.7
10.9
17.9
27.0
33.0
44.0
56.0
70.0
87.0
112.0
139.0
-
-
-
-
-
-
-
-
-
-
-
-
-
3.8
-
-
-
-
4.4
-
-
-
-
-
-
-
-
-
-
-
5.8
-
-
-
-
-
-
-
-
-
-
-
-
7.2
-
-
-
-
-
-
2.5
3.5
4.0
5.0
6.0
8.5
14.0
21.0
26.0
34.0
44.0
55.0
68.0
88.0
108.0
-
-
-
-
-
9.8
4.0
4.4
2.0
2.4
3.2
4.5
5.9
8.3
13.2
19.0
24.0
36.0
47.0
59.0
69.0
90.0
113.0
133.0
166.0
218.0
-
2.2
1.3
1.0
1.2
1.6
2.3
3.0
4.2
6.6
9.0
12.0
18.0
23.0
29.0
35.0
45.0
56.0
67.0
83.0
109.0
135.0
156.0
208.0
-
1.1
2.0
2.8
3.2
4.0
4.8
6.8
11.2
16.0
20.0
27.0
35.0
44.0
54.0
70.0
86.0
-
0.8
1.0
1.3
1.8
2.4
3.3
5.3
8.0
10.0
14.0
19.0
24.0
28.0
36.0
45.0
52.0
66.0
87.0
108.0
125.0
167.0
-
0.9
13.8
4.8
6.4
3.2
1.8
1.6
1.3
16.0
6.4
8.4
4.2
2.3
2.1
1.7
11/2
2
20.0
9.0
12.0
6.0
3.3
3.0
2.4
24.0
11.8
13.6
6.8
4.3
3.4
2.7
3
34.0
16.6
19.2
9.6
6.1
4.8
3.9
5
56.0
26.4
30.4
15.2
22.0
28.0
42.0
54.0
68.0
80.0
104.0
130.0
154.0
192.0
248.0
312.0
360.0
480.0
602.0
-
9.7
7.6
6.1
7-1/2
10
80.0
38.0
44.0
14.0
18.0
27.0
34.0
44.0
51.0
66.0
83.0
103.0
128.0
165.0
208.0
240.0
320.0
403.0
482.0
560.0
636.0
786.0
11.0
14.0
21.0
27.0
34.0
40.0
52.0
65.0
77.0
96.0
124.0
156.0
180.0
240.0
302.0
361.0
414.0
477.0
590.0
9.0
100.0
48.0
56.0
11.0
17.0
22.0
27.0
32.0
41.0
52.0
62.0
77.0
99.0
125.0
144.0
192.0
242.0
289.0
336.0
382.0
472.0
15
135.0
72.0
84.0
20
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
94.0
108.0
25
118.0
136.0
30
138.0
160.0
40
180.0
208.0
50
226.0
260.0
60
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
75
-
-
-
-
100
125
150
200
250
300
350
400
500
f
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
To obtain full-load currents for 200 and 208 Vac motors, increase corresponding 220 to 240 Vac ratings by 15 and 10 percent, respectively.
To obtain full-load currents for 265 and 277 Vac motors, decrease corresponding 220 to 240 Vac ratings by 13 and 17 percent, respectively.
15
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ IEC-Style Contactors and Starters Selection Guide
Definitions of Utilization Categories
Definitions of Utilization Categories
IEC contactors should be selected according to the utilization category which is a combination of
application and duty cycle rates defined by the following:
•
•
The type of application (inductive motor loads or resistive loads)
The conditions under which making or breaking current takes place (motor starting or running,
reversing, plugging or jogging, locked rotor or stalled motor)
•
Number of making and breaking operations (or cycles) required for the life of the contactor
Utilization Categories for Contactors Conforming to IEC 60947-4
Type of
Application
Utilization
Category
Definition
This category applies to AC loads with a power factor greater than or equal to 0.95 (cos ϕ ≥ 0.95).
Category AC-1
Application examples: heating, distribution.
This category applies to starting, plugging, and inching of slip ring motors.
On closing, the contactor makes the starting current, which is about 2.5 times the rated current of the
motor. On opening, it must break the starting current at a voltage less than or equal to the mains
supply voltage.
Category AC-2
This category applies to squirrel cage motors with breaking during normal running of the motor.
On closing, the contactor makes the starting current, which is about 5 to 7 times the rated current of
the motor. On opening, it breaks the rated current drawn by the motor; at this point, the voltage at the
contactor terminals is about 20% of the mains supply voltage. Breaking is light.
AC Applications
Category AC-3
Applications examples: all standard squirrel cage motors — lifts, escalators, conveyor belts, bucket
elevators, compressors, pumps, mixers, air conditioning units, and so forth.
These categories cover applications with plugging and inching of squirrel cage and slip ring motors.
The contactor closes at a current peak which may be as high as 5 or 7 times the rated motor current.
On opening, it breaks this same current at a voltage which is higher as the motor speed lessens. This
voltage can be the same as the mains voltage. Breaking is severe.
Categories AC-4
and AC-2
Application examples: printing machines, wire drawing machines, cranes, hoists, metallurgy industry.
This category applies to all types of DC load with a time constant (L/R) of less than or equal to 1 ms.
Category DC-1
Category DC-3
This category applies to starting, counter-current braking, and inching of shunt motors. The time
constant is less than or equal to 2 ms.
On closing, the contactor makes the starting current, which is about 2.5 times the rated motor current.
On opening, the contactor must be able to break 2.5 times the starting current at a voltage which is
less than or equal to the mains voltage. The slower the motor speed, and therefore the lower its back
e.m.f., the higher this voltage. Breaking is difficult.
DC applications
This category applies to starting, counter-current braking and inching of series wound motors.The
time constant is less than or equal to 7.5 ms.
Category DC-5
On closing, the contactor makes a starting current peak which may be as high as 2.5 times the rated
motor current. On opening, the contactor breaks this same current at a voltage which is higher as the
motor speed lessens. This voltage can be the same as the mains voltage. Breaking is severe.
Utilization Categories for Auxiliary Contacts and Control Relays Conforming to IEC 60947-5
Type of
Application
Utilization
Category
Definition
This category applies to the switching of electromagnetic loads whose power drawn with the
electromagnet closed is less than 72 VA.
Category AC-14
Category AC-15
Category DC-13
Application example: switching the operating coil of contactors and relays.
AC Applications
DC Applications
This category applies to the switching of electromagnetic loads whose power drawn with the
electromagnet closed is greater than 72 VA.
Application example: switching the operating coil of contactors.
This category applies to the switching of electromagnetic loads for which the time taken to reach 95%
of the steady state current (T=0.95) is equal to 6 times the power P drawn by the load (with P ≤ 50 W).
Application example: switching the operating coil of contactors without economy resistor.
16
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ IEC-Style Contactors and Starters Selection Guide
Definitions of Utilization Categories
The following tables show the results of tests performed according to standard utilization categories
conforming to IEC 60947 based on rated operational current (Ie) and rated operational voltage (Ve).
Contactors
Making and Breaking Conditions
(normal operation)
Making and Breaking Conditions
(occasional operation)
AC Supply
Making
I
Breaking
Making
I
Breaking
Utilization
Category
Typical Applications
V
cos ϕ
I
V
cos ϕ
V
cos ϕ
I
V
cos ϕ
Resistors, non-inductive
or slightly inductive loads
AC-1
AC-2
1 Ie
2 Ie
1.05 Ve
0.8
1 Ie
1.05 Ve
0.8
1.5 Ie
4 Ie
1.05 Ve
0.8
1.5 Ie
1.05 Ve
0.8
Slip ring motors:
starting, breaking
1.05 Ve
0.65
2 Ie
1.05 Ve
0.65
1.05 Ve
0.65
4 Ie
1.05 Ve
0.65
AC-3
Squirrel cage motors:
starting, breaking while
motor running
Ie ≤ 100A
Ie > 100A
AC-4
2 Ie
2 Ie
1.05 Ve
1.05 Ve
0.45
0.35
2 Ie
2 Ie
1.05 Ve
1.05 Ve
0.45
0.35
10 Ie
10 Ie
1.05 Ve
1.05 Ve
0.45
0.35
8 Ie
8 Ie
1.05 Ve
1.05 Ve
0.45
0.35
Motors
Slip ring motors:
starting, plugging, inching
Ie ≤ 100A
Ie > 100A
6 Ie
6 Ie
1.05 Ve
1.05 Ve
0.45
0.35
6 Ie
6 Ie
1.05 Ve
1.05 Ve
0.45
0.35
12 Ie
12 Ie
1.05 Ve
1.05 Ve
0.35
0.35
10 Ie
10 Ie
1.05 Ve
1.05 Ve
0.35
0.35
DC Supply
Making
I
Breaking
I
Making
I
Breaking
I
Utilization
Category
Typical Applications
L/R
(ms)
L/R
(ms)
L/R
(ms)
L/R
(ms)
V
V
V
V
Resistors, non inductive or slightly
inductive loads
DC-1
DC-3
DC-5
1 Ie
1 Ve
1
1 Ie
1 Ve
1
1.5 Ie
4 Ie
1.05 Ve
1.05 Ve
1.05 Ve
1
1.5 Ie
4 Ie
1.05 Ve
1.05 Ve
1.05 Ve
1
Shunt wound motors: starting,
counter-current braking, inching
2.5 Ie
2.5 Ie
1.05 Ve
1.05 Ve
2
2.5 Ie
2.5 Ie
1.05 Ve
1.05 Ve
2
2.5
15
2.5
15
Series wound motors: starting,
counter-current braking, inching
7.5
7.5
4 Ie
4 Ie
Auxiliary Contacts and Control Relays
Making and Breaking Conditions
(normal operation)
Making and Breaking Conditions
(occasional operation)
AC Supply
Making
Breaking
Making
Breaking
Utilization
Category
Typical Application
I
V
cos ϕ
0.3
I
V
cos ϕ
0.3
I
V
cos ϕ
0.7
I
V
cos ϕ
0.7
< 72 VA
≥ 72 VA
AC-14
AC-15
6 Ie
10 Ie
1 Ve
1 Ve
1 Ie
1 Ie
1 Ve
1 Ve
6 Ie
10 Ie
1.1 Ve
1.1 Ve
6 Ie
10 Ie
1.1 Ve
1.1 Ve
Electromagnets
0.3
0.3
0.3
0.3
DC Supply
Making
Breaking
Making
Breaking
Utilization
Category
Typical Application
L/R
(ms)
L/R
(ms)
L/R
(ms)
L/R
(ms)
I
V
I
V
I
V
I
V
Electromagnets
DC-13
1 Ie
1 Ve
6 P c
1 Ie
1 Ve
6 P c
1.1 Ie
1.1 Ve
6 P c
1 Ie
1.1 Ve
6 P c
c
The value 6 P (in watts) is based on practical observations and is considered to represent the majority of magnetic loads up to the maximum limit of P = 50 W, that is 6 P = 300 ms = L/R.
Above this, the loads are made up of smaller loads in parallel. The value 300 ms is therefore a maximum limit whatever the value of current drawn.
17
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ IEC-Style Contactors and Starters Selection Guide
Contactor Selection for Utilization Category AC-3
Contactor Selection for Utilization Category AC-3
How to Use the Electrical Life Curves
The contactor electrical life curves on the following pages may be used to estimate the number of make
and break operations a contactor can achieve for a specific application. Compare the application to the
utilization category definitions listed on page 16 and select the appropriate chart. Each chart shows the
Number of Operations in Millions on the Y axis and the Current Broken in Amps on the X axis.
AC-1 The current broken should be the same as the make and maintain current.
AC-3 The current broken should be the same as the full load current rating (FLA) of the motor.
AC-4 The current broken should be the same as the locked rotor current (LRA) or
6 times full-load current of the motor.
Once the appropriate chart is selected, find the breaking current of the application on the X axis of the
chart and draw a vertical line. Draw a vertical line at this point. Find the intersection of this vertical line
and the life curve of a particular contactor. At the intersection point read the number of electrical
operations off the Y axis. If longer electrical life is required, continue checking the intersection points
until an acceptable contactor is found.
Operational Current and Power Conforming to IEC (θ ≤ 55°C [131 °F]) for Category AC-3
LC1
LP1
LC1
LC1
LC1
LP1
LC1
LP1
LC1
LP1
LC1
LP1
LC1
LP1
LC1
LP1
LC1
LP1
LC1
Contactor Size
K06
K09
K12
D09
D12
D18
D25
D32
D38
D40
Max. operational
current (AC-3)
≤ 440 Vac
A
6
9
12
9
12
18
25
32
38
40
220/240 Vac kW
380/400 Vac kW
1.5
2.2
2.2
3
2.2
4
3
2.2
4
3
4
7.5
9
5.5
11
11
11
15
15
–
7.5
15
9
11
5.5
5.5
5.5
4
5.5
5.5
5.5
7.5
7.5
–
18.5
18.5
18.5
18.5
18.5
–
18.5
22
Rated
415 Vac
440 Vac
500 Vac
kW
kW
kW
4
4
15
operational power P
(standard motor
power ratings)
4
4
9
15
22
3
4
5.5
5.5
–
10
10
–
18.5
18.5
–
22
660/690 Vac kW
1000 Vac kW
3
4
4
30
–
–
–
22
Maximum Operating Rate in Operating Cycles/Hour f
LC1
LP1
LC1
LP1
LC1
LP1
LC1
LP1
LC1
LP1
LC1
LP1
LC1
On-load Factor
Operational Power
D09
1200
3000
1800
D12
1200
3000
1800
D18
1200
2500
1800
D25
1200
2500
1800
D32
1000
2500
1200
D38
1000
2500
1200
D40
1000
2500
1200
P
–
–
–
–
–
–
–
–
–
≤ 85%
≤ 25%
0.5 P
P
Operational Current and Power Conforming to UL, CSA (θ ≤ 55°C [131 °F])
LC1
LP1
LC1
LP1
LC1
LP1
LC1
LP1
LC1
LP1
LC1
LP1
LC1
LP1
LC1
LP1
LC1
LP1
LC1
Contactor Size
K06
K09
K12
D09
D12
D18
D25
D32
D38k
D40
Max. operational
current (AC-3)
≤ 440 Vac
A
6
9
12
9
12
18
25
32
–
40
200/208 Vac HP
230/240 Vac HP
460/480 Vac HP
575/600 Vac HP
1.5
1.5
3
2
3
5
5
3
2
3
5
7.5
7.5
15
10
10
20
30
–
–
–
–
10
10
30
30
Rated operational
power P (standard
motor power ratings)
60 Hz
3
2
3
5
7.5
10
5
7.5
10
10
15
3
7.5
20
f
Depending on the operational power and the on-load factor (θ ≤ 55 °C [131 °F]).
k
Not UL Listed or CSA Certified.
18
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ IEC-Style Contactors and Starters Selection Guide
Contactor Selection for Utilization Category AC-3
In many applications there is a mixture of AC3 and AC4 duty. For these applications the electrical life of
a particular contactor can be estimated by using the following formula:
AC3
E = --------------------------------------------------------------
P
P
AC3
--------
-------- ----------
1 –
+
×
100
100 AC4
Where:
E
= Estimated electrical life for mixed duty application
AC3 = Number of electrical operations taken from the 100% AC3 Duty Life Curve
AC4 = Number of electrical operations taken for the 100% AC4 Duty Life Curve
P
= Proportion of AC-4 operations to total operations for the application, expressed as a percentage.
Example: A LC1D12 contactor for a motor load of 7.5 HP at 460 Vac, 11 A, 15% AC4 duty.
AC-3 breaking current is 11 Amps
From chart: AC3 = 2,250,000 operations
AC-4 breaking current is 66 Amps (approximate inrush) From chart: AC4 = 90,000 operations
E = 2,250,000/[1 – (15/100) + (15/100) x (2,250,000 / 90,000)] = 489,130 operations for approximate electrical life
Operational Current and Power Conforming to IEC (θ ≤ 55°C [131 °F]) for Category AC-3
LC1
LP1
LC1
LP1
LC1
LP1
LC1
LC1
LC1
LC1
LC1
LC1
LC1
LC1
LC1
LC1
LC1
LC1
Contactor Size
D50
D65
D80
D95
D115 D150 F185 F225 F265 F330 F400 F500 F630 F780 F800
Max. operational
current (AC-3)
≤ 440 Vac
A
50
65
80
95
115
150
185
225
265
330
400
500
630
780
800
220/240 Vac kW
380/400 Vac kW
15
22
25
30
30
33
30
18.5
30
22
37
45
45
55
45
45
25
45
45
45
55
45
45
30
55
59
59
75
80
75
40
75
55
90
63
110
110
110
129
129
100
75
132
140
140
160
160
147
100
160
180
200
200
220
160
110
200
220
250
257
280
185
147
250
280
295
355
335
335
200
335
375
400
400
450
450
220
400
425
425
450
475
450
250
450
450
450
450
475
450
Rated
415 Vac
440 Vac
500 Vac
kW
kW
kW
37
80
100
100
110
110
100
operational power P
(standard motor
power ratings)
37
80
37
90
660/690 Vac kW
1000 Vac kW
37
100
90
37
Maximum Operating Rate in Operating Cycles/Hour f
LC1
LP1
LC1
LP1
LC1
LP1
LC1
LC1
LC1
LC1
LC1
LC1
LC1
LC1
LC1
LC1
LC1
LC1
Operational
Power
On-load Factor
D50
1000
2500
1200
D65
1000
2500
1200
D80
750
D95
750
D115 D150
F185
750
F225
750
F265
750
F330
750
F400
500
F500
500
F630
500
F780
500
F800
500
P
750
2000
1200
750
1200
1200
≤ 85%
≤ 25%
0.5 P
P
2000
1200
2000
1200
2000
1200
2000
1200
2000
1200
2000
1200
1200
1200
1200
1200
1200
1200
1200
600
600
600
Operational Current and Power Conforming to UL, CSA (θ ≤ 55°C [131 °F])
LC1
LP1
LC1
LP1
LC1
LP1
LC1
LC1
LC1
LC1
LC1
LC1
LC1
LC1
LC1
LC1
LC1
LC1
Contactor Size
D50
D65
D80 D95 k D115 D150 F185 F225 k F265 F330 F400 F500 F630 F780 F800
Max. operational
current (AC-3)
≤ 440 Vac
A
50
65
80
–
115
150
185
–
265
330
400
500
630
780
800
200/208 Vac HP
230/240 Vac HP
460/480 Vac HP
575/600 Vac HP
15
15
40
40
20
20
50
50
30
30
60
60
–
–
–
–
30
40
40
50
50
60
–
–
–
–
60
75
75
100
200
250
100
125
250
300
150
200
400
500
–
300
600
800
–
450
900
900
350
400
900
900
Rated operational
power P (standard
motor power ratings)
60 Hz
75
100
125
125
150
150
200
100
f
Depending on the operational power and the on-load factor (θ ≤ 55 °C [131 °F]).
k
Not UL Listed or CSA Certified.
19
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ IEC-Style Contactors and Starters Selection Guide
Contactor Selection for Utilization Category AC-3
Use in Category AC-3 (Ve ≤ 440 Vac)
Control of 3-phase
asynchronous squirrel
cage motors with
breaking while
running.
10
8
6
The current broken
4
(Ic) in category AC-3
is equal to the rated
operational current
2
(Ie) of the motor.
1.5
1
0.8
Use motor full-load
current on horizontal
0.6
axis for selection
purposes.
0.5
1
2
3
4
5
6
7
8
10 12 15
20
25 30
32
38
50
65 80 95115
150
200
9
Current broken in A
18
kW
kW
kW
230 V
400 V
440 V
NOTE: The dotted lines relate to LC1D38 contactors only.
Operational power in kW-50 Hz.
Example: Asynchronous motor with P = 5.5 kW – Ve = 400 V – Ie = 11 A – Ic = Ie = 11 A; or
Asynchronous motor with P = 5.5 kW – Ve = 415 V – Ie = 11 A – Ic = Ie = 11 A.
3 million operating cycles required.
The above selection curves show the contactor rating needed: LC1D18 or LP1D18.
Use in Category AC-3 (Ve = 660/690 Vac)
Control of 3-phase
asynchronous squirrel
cage motors with
breaking while
10
8
running.
6
The current broken
(Ic) in category AC-3
is equal to the rated
operational current
(Ie) of the motor.
4
3
2
1.5
1
0.8
Use motor full-load
current on horizontal
axis for selection
purposes.
0.6
200
Current broken in A
1
2
3
4
5
6
7
8
10
11
15
20
40
50 60
80 90 100
33
6.6
9
17 22
35 42 48
NOTE: For Ve = 1000 Vac, use the 660/690 Vac curves without exceeding the corresponding
operational current at the operational power indicated for 1000 Vac.
20
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ IEC-Style Contactors and Starters Selection Guide
Contactor Selection for Utilization Category AC-3
Use in Category AC-3 (Ve ≤ 440 Vac)
Control of 3-phase
asynchronous squirrel
cage motors with
breaking while
10
8
6
running.
4
The current broken
(Ic) in category AC-3
is equal to the rated
operational current
(Ie) of the motor.
2
1.5
1
0.8
0.6
Use motor full-load
current on horizontal
axis for selection
purposes.
0.4
20
30
40
50 60
80
100
200
400
600
800
90
kW
kW
220 V
230 V
380 V
400 V
kW
440 V
Operational power in kW-50 Hz.
Example: Asynchronous motor with P = 132 kW – Ve = 380 V – Ie = 245 A – Ic = Ie = 245 A; or
Asynchronous motor with P = 132 kW – Ve = 415 V – Ie = 240 A – Ic = Ie = 240 A.
1.5 million operating cycles required.
The above selection curves show the contactor rating needed: LC1F330.
Use in Category AC-3 (Ve = 660/690 Vac)
Control of 3-phase
asynchronous squirrel
cage motors with
breaking while
10
8
6
running.
4
The current broken
(Ic) in category AC-3
is equal to the rated
operational current
(Ie) of the motor.
2
1.5
1
0.8
0.6
Use motor full-load
current on horizontal
axis for selection
purposes.
0.4
20
30
40
50 60
80 90 100 118
129
170 200
220
400
305 355
kW
660 V
690 V
Example: Asynchronous motor with P = 132 kW – Ve = 660 V – Ie = 140 A – Ic = Ie = 140 A.
1.5 million operating cycles required.
The above selection curves show the contactor rating needed: LC1F330.
21
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ IEC-Style Contactors and Starters Selection Guide
Contactor Selection for Utilization Category AC-1
Contactor Selection for Utilization Category AC-1
Maximum Operational Current (Open-mounted Device)
LC1
LC1
LC1
LP1
LC1
LP1
LC1
LP1
LC1
LP1
LC1
LP1
LC1
LP1
LC1
LP1
LC1
Contactor Size
K09
K12
D09
D12
D18
D25
D32
D38
D40
Maximum operating rate
operating cycles/hour
600
600
600
600
600
600
600
600
600
4 (#12) 4 (#12) 4 (#12) 4 (#12) 6 (#10) 6 (#10) 10 (#8) 10 (#8) 16 (#6)
cable c.s.a
bar c.s.a.
mm2 (AWG)
mm
Cabling to IEC 60947-1
–
–
–
–
–
–
–
–
–
≤ 40 °C (104 °F)
≤ 55 °C (131 °F)
A
A
20
20
f
20
20
f
25
25
17
9
25
25
17
9
32
32
22
11
12
20
21
23
23
34
–
40
40
28
14
15
25
27
29
33
43
–
50
50
35
18
19
31
34
36
41
54
–
50
50
35
18
19
31
34
36
41
54
–
60
60
42
21
23
37
41
43
49
65
70
Operational current in A, in
AC-1 according to the
ambient temperature to
IEC 60947-1
≤ 70 °C (158 °F) A (to Vc)
220/230 Vac
240 Vac
kW
kW
kW
kW
kW
kW
kW
kW
8
8
8
8
9
9
380/400 Vac
415 Vac
14
14
15
17
22
–
14
14
15
17
22
–
15
17
18
20
27
–
15
17
18
20
27
–
Maximum operational power
≤ 55°C
440 Vac
500 Vac
660/690 Vac
1000 Vac
f
Please consult our local representatives or agents.
Increase in operation current by paralleling of poles: Apply the following multiplying factors to the current or power values given above.
The factors take into account the often unbalanced current distribution between poles:
2 poles in parallel: K = 1.6
3 poles in parallel: K = 2.25
4 poles in parallel: K = 2.8
Use in Category AC-1 (Ve ≤ 440 Vac)
Control of resistive
circuits (power
factor ≥ 0.95).
The current broken
(Ic) in category AC-1
is equal to the
current (Ie) normally
drawn by the load.
10
8
6
4
Use motor full-load
current on horizontal
axis for selection
purposes.
2
1.5
1
0.8
0.6
0.4
0.2
0.1
1
2
3
4
6
8
10
20
25 32 40 50 60
80 100 125
200 250
400
Current broken in A
Example: Ve = 220 V – Ie = 50 A (θ ≤ 40 °C) – Ic = Ie = 50 A.
2 million operating cycles required.
The above selection curves show the contactor rating needed: LC1D50 or LP1D50.
22
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ IEC-Style Contactors and Starters Selection Guide
Contactor Selection for Utilization Category AC-1
Maximum Operational Current (Open-mounted Device)
LC1 LC1 LC1
LP1 LP1 LP1
LC1 LC1 LC1 LC1 LC1 LC1 LC1 LC1
LC1
LC1
LC1
LC1
Contactor Size
D11 D15
D50 D65 D80 D95
F185 F225 F265 F330 F400
F500
F630
F780
F800
5
0
Maximum operating rate
operating cycles/hour
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
120
(250
120
(250
150
(300
185
(350
185
(350
240
(500
mm2
(AWG)
25
(#4)
25
(#4)
50
(#0)
50
(#0)
cable c.s.a
–
–
–
–
–
MCM) MCM) MCM) MCM) MCM) MCM)
Cabling to IEC
60947-1
Number of Bars
bar c.s.a.
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
2
2
2
2
2
mm
inches
A
–
–
30 x 5
40 x 5
60 x 5
100 x 5
60 x 5
2.36 x 0.2
1000
850
–
–
1.18 x 0.2 1.57 x 0.2 2.36 x 0.2 4.0 x 0.2
Operational
≤ 40 °C (104 °F)
≤ 55 °C (131 °F)
80
80
125
125
125
125
250
200
250
200
275
275
315
280
350
300
400
360
500
430
700
580
1000
850
1600
1350
current in A, in
AC-1 according
to the ambient
A
80
80
temperature to ≤ 70 °C (158 °F) A (to Vc)
56
56
80
80
160
160
180
200
250
290
340
500
700
1100
700
IEC 60947-1
220/230 Vac
240 Vac
kW
kW
kW
kW
kW
kW
kW
kW
29
31
50
54
58
65
86
85
29
31
45
49
45
49
80
83
80
83
90
95
100
110
175
185
200
220
300
450
120
125
210
220
230
270
370
540
145
160
250
260
290
320
400
640
170
180
300
310
330
380
530
760
240
255
430
445
470
660
740
950
350
370
550
570
350
370
380/400 Vac
415 Vac
50
78
78
135
140
150
170
235
345
135
140
150
170
235
345
165
170
180
200
280
410
600
950
600
Maximum
operational
power ≤ 55°C
(131°F)
54
85
85
630
1000
1050
1200
1650
2400
630
440 Vac
58
90
90
670
670
500 Vac
65
102
135
120
102
135
120
750
750
660/690 Vac
1000 Vac
86
1000
1500
1000
1500
100
Increase in operation current by paralleling of poles: Apply the following multiplying factors to the current or power values given above.
The factors take into account the often unbalanced current distribution between poles:
2 poles in parallel: K = 1.6
3 poles in parallel:
K = 2.254 poles in parallel:K = 2.8
Use in Category AC-1 (Ve ≤ 440 Vac)
Control of resistive
10
circuits (power
8
6
factor ≥ 0.95).
4
The current broken
(Ic) in category AC-1
is equal to the
2
current (Ie) normally
drawn by the load.
1
0.8
Use motor full-load
0.6
current on horizontal
axis for selection
0.4
purposes.
0.2
0.1
20
40 50 60
80 100
200 250 300 350
275 315 400 500
600
800 1000
1600
Current broken in A
700
NOTE: The dotted lines relate to LC1F225 contactors only.
Example: Ve = 220 V – Ie = 500 A (θ ≤ 40 °C) – Ic = Ie = 500 A.
2 million operating cycles required.
The above selection curves show the contactor rating needed: LC1 F780.
23
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ IEC-Style Contactors and Starters Selection Guide
Contactor Selection for Utilization Categories AC-2 and AC-4
Contactor Selection for Utilization Categories AC-2 and AC-4
Utilization category AC-2 is for breaking the starting current of slip-ring motors, while utilization category
AC-4 is for breaking the starting current of squirrel-cage motors.
Maximum Breaking Current for Categories AC-2 and AC-4
LC1
LP1
LC1
LP1
LC1
LP1
LC1
LP1
LC1
LP1
LC1
LP1
LC1
LP1
LC1
LP1
LC1
LP1
LC1
D38
Contactor Size
K06
K09
K12
D09
D12
D18
D25
D32
D40
In category AC-4 (Ie maximum)
– Ve ≤ 440 Vac
Ie maximum broken = 6 x I motor
A
A
36
54
54
54
72
108
150
192
192
105
240
– 440 Vac ≤ Ve ≤ 690 Vac
Ie maximum broken = 6 x I motor
26
40
40
40
50
70
90
105
150
Depending on the maximum operating rate f and the on-load factor, θ ≤ 55 °C [131 °F] c
From 150 & 15% to 300 & 10%
From 150 & 20% to 600 & 10%
From 150 & 30% to 1200 & 10%
From 150 & 55% to 2400 & 10%
From 150 & 85% to 3600 & 10%
A
A
A
A
A
20
18
16
13
10
30
27
24
19
16
30
27
24
19
16
30
27
24
19
16
40
36
30
24
21
45
40
35
30
25
75
67
56
45
40
80
70
60
50
45
80
70
60
50
45
110
96
80
62
53
f
Do not exceed the maximum number of mechanical operating cycles.
c
For temperatures higher than 55 °C (131 °F), use a maximum operating rate value equal to 80% of the actual value when
selecting from the above tables.
Plugging
The current varies from the maximum plug-braking current to the rated motor current. The making
current must be compatible with the rated making and breaking capacities of the contactor. As breaking
normally takes place at a current value at or near the locked rotor current, the contactor can be selected
using the criteria for categories AC-2 and AC-4.
Permissible AC-4 Power Rating for 200,000 Operating Cycles
LC
LP
LC
LP
LC
LP
LC
LP
LC
LP
LC
LP
LC
LP
LC
LP
LC
LP
•
•
•
•
•
•
•
•
•
•
LC
•
•
K09
1.1
2.2
2.2
2.2
3
•
K12
1.1
2.2
2.2
2.2
3
•
D09
1.5
2.2
2.2
2.2
3
•
D12
1.5
3.7
3
•
D18
2.2
4
•
D25
3
•
D32
4
•
D40
4
Operational Voltage
K06
D38
4
220/230 Vac
380/400 Vac
415 Vac
kW
kW
kW
kW
kW
kW
0.75
1.5
1.5
1.5
2.2
3
5.5
5.5
5.5
7.5
10
7.5
7.5
7.5
9
7.5
7.5
7.5
9
9
3.7
3.7
5.5
7.5
9
440 Vac
3
11
11
15
500 Vac
4
660/690 Vac
4
4
4
5.5
11
11
Note: Tables continue on next page.
24
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ IEC-Style Contactors and Starters Selection Guide
Contactor Selection for Utilization Categories AC-2 and AC-4
Maximum Breaking Current for Categories AC-2 and AC-4
LC1
LP1
LC1
LP1
LC1
LP1
LC1
D95
LC1
LC1
LC1
LC1
LC1
LC1
LC1
LC1
LC1
LC1
LC1
Contactor Size
D50
D65
D80
D115 D150 F185 F225 F265 F330 F400 F500 F630 F780 F800
In category AC-4 (Ie maximum)
– Ve ≤ 440 Vac
Ie maximum broken = 6 x I motor
A
A
300
390
480
570
630
540
830
640
1020
708
1230
810
1470
1020
1800
1410
2220
1830
2760
2130
3360
2760
4260
2910
3690
2910
– 440 Vac ≤ Ve ≤ 690 Vac
Ie maximum broken = 6 x I motor
170
210
250
250
Depending on the maximum operating rate f and the on-load factor, θ ≤ 55 °C [131 °F] c
From 150 & 15% to 300 & 10%
From 150 & 20% to 600 & 10%
From 150 & 30% to 1200 & 10%
From 150 & 55% to 2400 & 10%
From 150 & 85% to 3600 & 10%
A
A
A
A
A
140
120
100
80
160
148
132
110
90
200
170
145
120
100
200
170
145
120
100
280
250
215
170
125
310
280
240
150
145
380
350
300
240
170
420
400
330
270
190
560
500
400
320
230
670
600
500
390
290
780
700
600
450
350
1100
950
750
600
500
1400
1250
950
1600
1400
1100
820
1600
1400
1100
820
720
70
660
710
710
f
Do not exceed the maximum number of mechanical operating cycles.
c
For temperatures higher than 55 °C (131 °F), use a maximum operating rate value equal to 80% of the actual value when
selecting from the above tables.
Plugging
The current varies from the maximum plug-braking current to the rated motor current. The making current must be compatible
with the rated making and breaking capacities of the contactor. As breaking normally takes place at a current value at or near the
locked rotor current, the contactor can be selected using the criteria for categories AC-2 and AC-4.
Permissible AC-4 Power Rating for 200,000 Operating Cycles
LC
LP
LC
LP
LC
LP
•
•
•
LC
LC1
LC1
LC1
LC1
LC1
LC1
LC1
LC1
LC1
LC1
LC1
•
•
D50
5.5
11
•
D65
7.5
11
•
D80
7.5
15
Operational Voltage
D95
9
D115 D150 F185 F225 F265 F330 F400 F500 F630 F780 F800
220/230 Vac
380/400 Vac
415 Vac
kW
kW
kW
kW
kW
kW
9
11
22
22
22
30
45
22
40
45
45
51
63
25
45
51
51
59
75
30
55
59
63
75
90
37
63
75
75
80
110
40
75
80
80
90
129
45
55
63
63
15
15
15
22
25
18.5
18.5
18.5
37
80
100
100
110
132
160
110
110
132
150
185
110
110
132
150
185
11
11
15
90
440 Vac
11
15
15
100
110
140
500 Vac
15
18.5
22
22
660/690 Vac
18.5
25
30
25
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ IEC-Style Contactors and Starters Selection Guide
Contactor Selection for Utilization Categories AC-2 and AC-4
Use in Categories AC-2 or AC-4 (Ve ≤ 440 Vac)
Control of 3-phase
asynchronous squirrel
cage (AC-4) or slip-
ring (AC-2) motors
with breaking while
motor stalled.
1
The current broken
0.8
(Ic) in category AC-4
0.6
is equal to 6 times Ie,
where le is the
0.4
operational current
of the motor.
0.2
Use motor-locked
rotor current (6 times
full-load current) on
horizontal axis for
0.1
0.08
0.06
0.05
selection purposes.
0.04
0.03
0.02
0.01
5
6
7
8
9 10
20
30 36 40 50 54
72 80
108
150 192 240 300 390 480570 630 828 1000
Current broken in A
NOTE: The dotted lines relate to LC1K12 and LP1K12 contactors only.
Example: Asynchronous motor with P = 5.5 kW – Ve = 400 V – Ie = 11 A
Asynchronous motor with P = 5.5 kW – Ve = 415 V – Ie = 11 A
200,000 operating cycles required.
lc = 6 x le = 66 A; or
lc = 6 x le = 66 A.
The above selection curves show the contactor rating needed: LC1D25 or LP1D25.
Use in Category AC-4 (440 Vac < Ve ≤ 690 V)
Control of 3-phase
asynchronous squirrel
cage motors with
breaking while motor
stalled.
The current broken
(Ic) in category AC-4
is equal to 6 times Ie,
where le is the
1
0.8
0.6
0.4
operational current
of the motor.
0.2
Use motor-locked
rotor current (6 times
full-load current) on
horizontal axis for
selection purposes.
0.1
0.08
0.06
0.05
0.04
0.03
0.02
0.01
5
6
7
8
9 10
20
30
40 50
70
90 105
150 170 210250300 400 500540 640 800 1000
Current broken in A
26
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ IEC-Style Contactors and Starters Selection Guide
Contactor Selection for Utilization Categories AC-2 and AC-4
Use in Categories AC-2 or AC-4 (Ve ≤ 440 Vac)
1
0.8
Control of 3-phase
asynchronous squirrel
cage (AC-4) or slip-
ring (AC-2) motors
with breaking while
motor stalled.
0.6
0.4
0.2
The current broken
(Ic) in category AC-4
is equal to 6 times Ie,
where le is the
0.1
0.08
0.06
0.04
operational current
of the motor.
0.02
0.01
Use motor-locked
rotor current (6 times
full-load current) on
horizontal axis for
selection purposes.
100
200
400
600
800 1000
2000
5000
3800
Current broken in A
Example: Asynchronous motor with P = 90 kW – Ve = 380 V – Ie = 170 A
Asynchronous motor with P = 90 kW – Ve = 415 V – Ie = 165 A
60,000 operating cycles required.
lc = 6 x le = 1020 A; or
lc = 6 x le = 990 A.
The above selection curves show the contactor rating needed: LC1F265.
Use in Category AC-4 (440 Vac < Ve ≤ 690 V)
1
0.8
Control of 3-phase
asynchronous squirrel
cage motors with
breaking while motor
stalled.
0.6
0.4
0.2
The current broken
(Ic) in category AC-4
is equal to 6 times Ie,
where le is the
0.1
0.08
0.06
operational current
of the motor.
0.04
Use motor-locked
rotor current (6 times
full-load current) on
horizontal axis for
selection purposes.
0.02
0.01
100
200
400
600
800 1000
2000
4000
Current broken in A
27
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ IEC-Style Contactors and Starters Selection Guide
Contactor Selection for Utilization Categories DC-1 to DC-5
Contactor Selection for Utilization Categories DC-1 to DC-5
Rated Operational Current (Ie) in Amperes for Category DC-1
L
R
Resistive loads: time constant
≤ 1 ms, ambient θ ≤ 55 °C [131 °F]
Contactor Rating f
Rated
Number
Operational of Poles
LC1
LC1
LP1
LC1
LP1
LC1
LP1
LC1
LP1
LC1
LC1
LP1
LC1
LP1
LC1
LP1
LC1
LP1
Voltage
Ve
Connected LP1
in Series
D09
–
–
+
+
D12
15
18
20
20
12
17
20
20
6
D18
15
18
20
–
D25
30
32
32
32
25
30
32
32
8
D32
30
32
32
–
D38
30
32
32
–
D40
40
55
55
55
25
55
55
55
8
D50
50
70
70
–
D65
50
70
70
70
25
70
70
70
8
D80
70
100
100
100
25
100
100
100
8
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
3
4
4
2
3
4
15
18
20
–
24 Vdc
12
17
20
–
12
17
20
–
25
30
32
–
25
30
32
–
25
70
70
–
48/75 Vdc
125 Vdc
6
8
8
8
8
12
15
–
12
15
17
4
12
15
–
25
27
30
5
25
27
–
25
27
–
40
45
55
5
50
60
–
60
65
70
5
80
85
100
5
4
5
5
5
5
8
8
8
15
22
25
–
15
22
–
15
22
–
35
40
50
–
40
50
–
40
50
60
–
45
55
70
–
225 Vdc
300 Vdc
10
–
10
12
–
10
–
–
–
–
–
–
–
12
–
–
25
–
–
40
–
40
–
–
60
–
70
–
460 Vdc
900 Vdc
1200 Vdc
1500 Vdc
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Rated Operational Current (Ie) in Amperes for Categories DC-2 to DC-5
L
R
Inductive loads: time constant
≤ 15 ms, ambient θ ≤ 55 °C [131 °F]
Contactor Rating f
Rated
Number
Operational of Poles
LC1
Connected LP1
LC1
LP1
LC1
LP1
LC1
LP1
LC1
LP1
LC1
LC1
LP1
LC1
LP1
LC1
LP1
LC1
LP1
–
–
+
+
Voltage
Ve
in Series
D09
12
15
18
–
D12
12
15
18
18
10
12
15
15
2
D18
12
15
18
–
D25
20
25
30
30
15
20
30
30
2.5
15
20
25
1
D32
20
25
30
–
D38
20
25
30
–
D40
25
30
45
50
15
25
40
50
2.5
20
30
40
1
D50
35
45
55
–
D65
35
45
55
60
15
40
50
60
2.5
25
35
50
1
D80
40
60
80
90
15
50
70
90
2.5
40
60
72
1
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
3
4
1
4
2
3
4
24 Vdc
10
12
15
–
10
12
15
–
15
20
30
–
15
20
30
–
15
40
50
–
48/75 Vdc
125 Vdc
225 Vdc
2
2
2.5
15
20
–
2.5
15
20
–
2.5
25
35
–
8
8
8
12
–
12
15
0.75
1.5
6
12
–
0.75
1.5
6
0.75
1.5
6
1
1
1
3
3
3
4
5
5
7
10
15
–
10
–
10
–
20
25
–
25
–
25
30
–
35
40
–
–
8
–
–
–
–
–
–
–
300 Vdc
460 Vdc
–
6
–
10
–
–
–
20
–
–
25
–
35
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
900 Vdc
1200 Vdc
1500 Vdc
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
f
For rated operational currents of contactors LC1 and LP1K, please consult your Local Square D Field Sales Office.
Continued on next page.
28
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ IEC-Style Contactors and Starters Selection Guide
Contactor Selection for Utilization Categories DC-1 to DC-5
Rated Operational Current (Ie) in Amperes for Category DC-1
L
R
Resistive loads: time constant
≤ 1 ms, ambient θ ≤ 55 °C [131 °F]
Rated
Number
Operational
Voltage
Ve
of Poles
Connected
in Series
LC1
LC1
LC1
LC1
LC1
LC1
LC1
LC1
LC1
LC1
LC1
LC1
D95
70
100
100
–
D115
200
200
200
200
200
200
200
200
180
180
200
200
160
160
200
200
140
180
140
–
D150
200
200
200
–
F185
240
240
240
240
240
240
240
240
210
210
240
240
–
F225
260
260
260
260
260
260
260
260
230
230
260
260
–
F265
300
300
300
300
300
300
300
300
270
270
300
300
–
F330
360
360
360
360
360
360
360
360
320
320
360
360
–
F400
430
430
430
430
430
430
430
430
380
380
430
430
–
F500
580
580
580
580
580
580
580
580
520
520
580
580
–
F630
850
850
850
850
850
850
850
850
760
760
850
850
–
F780
1300
1300
1300
1300
1300
1300
1300
1300
1180
1180
1300
1300
–
F800
850
850
850
850
850
850
850
850
760
760
850
850
–
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
3
4
4
2
3
4
24 Vdc
25
100
100
–
200
200
200
–
48/75 Vdc
125 Vdc
8
180
180
200
–
80
85
–
5
160
160
200
–
45
55
–
190
240
240
190
240
190
–
200
260
260
200
260
200
–
250
300
300
250
300
250
–
280
360
360
280
360
280
–
350
430
430
350
430
350
–
450
580
580
450
580
450
–
700
850
850
700
850
700
–
1000
1300
1300
1000
1000
1000
–
700
850
850
700
850
700
–
225 Vdc
300 Vdc
–
140
–
–
460 Vdc
900 Vdc
1200 Vdc
1500 Vdc
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Rated Operational Current (Ie) in Amperes for Categories DC-2 to DC-5
L
R
Inductive loads: time constant
≤ 15 ms, ambient θ ≤ 55 °C [131 °F]
Contactor Rating f
Rated
Number
Operational
Voltage
Ve
of Poles
Connected
in Series
LC1
LC1
LC1
LC1
LC1
LC1
LC1
LC1
LC1
LC1
LC1
LC1
D95
40
60
80
–
D115
200
200
200
200
200
200
200
200
100
140
200
200
100
120
140
180
100
180
–
D150
200
200
200
–
F185
240
240
240
240
240
240
240
240
–
F225
260
260
260
260
260
260
260
260
–
F265
300
300
300
300
300
300
300
300
–
F330
360
360
360
360
360
360
360
360
–
F400
430
430
430
430
430
430
430
430
–
F500
580
580
580
580
580
580
580
580
–
F630
850
850
850
850
850
850
850
850
–
F780
1300
1300
1300
1300
1300
1300
1300
1300
–
F800
850
850
850
850
850
850
850
850
–
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
3
4
1
4
2
3
4
24 Vdc
15
50
70
–
200
200
200
–
48/75 Vdc
125 Vdc
225 Vdc
2.5
40
60
–
100
140
220
–
160
240
240
–
180
240
240
–
250
280
280
–
300
310
310
–
350
350
350
–
500
550
550
–
700
850
850
–
1000
1000
1000
–
700
850
850
–
1
100
120
140
–
7
140
160
240
140
240
–
160
180
260
160
260
–
220
250
300
220
300
–
280
300
360
280
360
–
310
350
430
310
430
–
480
500
580
480
580
–
680
700
850
680
850
–
900
1000
1300
900
1300
–
680
700
850
680
850
–
35
–
–
100
–
300 Vdc
460 Vdc
–
–
–
–
100
–
100
–
140
–
160
–
220
–
280
–
310
–
480
–
680
–
800
–
680
–
900 Vdc
1200 Vdc
1500 Vdc
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
f
For rated operational currents of contactors LC1 and LP1K, please consult your Local Square D Field Sales Office.
29
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ IEC-Style Contactors and Starters Selection Guide
Contactor Selection for Utilization Categories DC-1 to DC-5
Use in Category DC-1 to DC-5
The criteria for contactor selection are:
•
•
•
•
The rated operational current Ie.
The rated operational voltage Ve (see page 31).
The utilization category and the time constant L/R (see page 31)
The required electrical durability.
Maximum Operating Rate (Operating Cycles)
The following operating rate must not be exceeded: 120 operating cycles/hour at rated operational
current Ie.
Electrical Durability
10
8
6
4
2
1
0.8
0.6
0.4
0.2
0.1
0.08
0.06
0.04
0.02
0.01
0.2
0.3 0.4 0.5 0.6 0.8
0.7 0.9
1
2
3
4
5
6
7
9
14
20
30
24 32 36
Power broken per pole in kW
40 50 60 70 90100
8
10
16
80
Example: Series-wound motor with P = 1.5 kW, Ve = 200 V, and Ie = 7.5 A.
Application: counter-current braking and inching (utilization category DC-5).
Select a contactor type LC1D25 or LP1D25 with 3 poles in series.
The power broken is: Pc total = 2.5 x 200 x 7.5 = 3.75 kW.
The power broken per pole is: 1.25 kW.
The electrical durability read from the curve above is ≥ 106 operating cycles.
Use of Poles in Parallel
Electrical durability can be increased by using poles connected in parallel. With N poles connected in
parallel, the electrical durability becomes: electrical durability read from the curves x N x 0.7.
NOTE: Connecting the poles in parallel does not allow the maximum operational currents indicated on
pages 28 and 29 to be exceeded.
NOTE: Ensure that the connections are made in such a way as to equalize the currents in each pole.
30
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ IEC-Style Contactors and Starters Selection Guide
Contactor Selection for Utilization Categories DC-1 to DC-5
Telemecanique offers a line of contactors for applications involving DC control circuits. It does not matter
whether the power circuit is AC or DC. There are two considerations when using these contactors in
applications involving a DC power circuit:
1. Voltage per pole must not be exceeded.
On D-line contactors, you can use the AC inductive/resistive rating as long as the voltage does not
exceed 75 volts per pole. On F-line contactors, the voltage must not exceed 125 volts per pole.
However, by wiring the contacts in series, you can multiply the number of poles in series by the
maximum voltage allowed per pole.
Example 1: D-Line contactors (9 - 38 amps)
Example 2: F-Line & D115, D150 contactors
75 volts
150 volts
225 volts
300 volts
125 volts
250 volts
375 volts
500 volts
On AC power circuits, follow regular procedures.
2. L/R ≤ 15 ms without derating.
A time constant is defined as the length of time it takes the current to rise from 0 to 63.2% of its
maximum value, or to decay to 36.8% of its maximum value. Time constants are measured in
seconds. The inductance (L) is measured in henries and the resistance (R) is measured in ohms.
In a pure resistive circuit, current reaches its maximum value when the circuit is energized. Because
inductance opposes a change in current flow and tends to hold back current, the time constant will
increase as the circuit inductance is increased. As the time constant exceeds 15 ms, the electrical
life of the contactor is affected and a derating factor (normally one contactor size) is needed to
compensate for this loss. In most applications this time constant will be under 15 ms. It is a good
idea, however, to check with the motor manufacturer.
31
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ IEC-Style Contactors and Starters Selection Guide
Voltage Code Tables
Voltage Code Table
Voltage Code Tables _ See notes pertaining to each product line at the end of this table.
K-line
D-line
LC1D09 -
D38
LC2D09 -
D38
F-line
LC1D40 -
D95
LC2D40 -
D95
LC1K
LP1K
LC1D115 -
D150
Note
LC7K
LC8K
Note K4
LC1F115 - LC1F265 - LC1F500 -
F225
Note F1, F2 Note F1, F2 Note F1, F2
LC1F800
Note F1,
F2, F3,
LC2K
Notes
K1, K2
LP2K LP4K
Notes LP5K
K2, K3
LC1F780
Note F1, F2
Voltage Frequency
F400
F630
D1, D2, D4
Notes D1, D3
Note D1
5
Low
Consump
DC
-
-
-
-
AL
-
-
-
-
-
-
-
50/60
50
J7
-
-
-
-
-
-
-
-
-
J7
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
J5
JD
DC
-
JD
JD
12
Low
Consump
DC
-
-
-
-
-
-
JW3
-
JL
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Wide Range
DC
JW
50/60
50
Z7
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Z7
Z5
Z6
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
60
-
20
DC
ZD
Low
Consump
DC
-
-
-
-
ZW3
-
ZL
B7
-
-
-
-
-
-
-
-
-
-
-
-
B7
Note K2
50/60
B7
B7
B7
50
60
-
-
-
-
-
-
-
-
-
-
B5
B6
B5
B6
B5
B6
-
-
-
-
-
-
-
-
B7
Note F4
40-400
DC
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
24
BD
Note K2
BD
Note F4
BD
BD
BD
BD
Low
Consump
DC
-
-
-
-
-
-
BW3
-
BL
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Wide Range
DC
BW
50/60
DC
C7
-
-
-
-
-
-
CC7
CD
-
-
-
-
-
-
-
-
-
-
-
-
CD
CD
CD
36
42
Wide Range
DC
-
-
-
-
-
CW
-
-
-
-
-
-
50/60
50
D7
D7
-
-
-
-
-
-
-
-
-
D7
D7
D5
-
D7
D5
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
D5
-
-
-
-
-
60
-
50/60
50
E7
-
E7
-
-
-
E7
-
E7
E5
E6
-
E7
E5
E6
-
-
-
-
E5
E6
E7
ED
-
-
60
-
-
-
-
-
-
40-400
DC
-
-
-
-
E7
ED
E7
ED
48
-
-
ED
ED
ED
ED
Low
Consump
DC
-
-
-
-
-
-
EW3
-
EL
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Wide Range
DC
EW
50/60
DC
-
-
-
-
-
-
-
-
-
-
EE7
ND
SD
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
60
72
ND
SD
ND
SD
ND
SD
DC
Low
Consump
DC
-
-
-
-
-
-
-
-
-
SW3
SL
-
-
SW
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Wide Range
DC
-
-
Low
Consump
DC
96
DL
32
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ IEC-Style Contactors and Starters Selection Guide
Voltage Code Tables
Voltage Code Tables (Continued) _ See notes pertaining to each product line at the end of this table.
K-line
D-line
LC1D09 -
D38
LC2D09 -
D38
F-line
LC1D40 -
D95
LC2D40 -
D95
LC1K
LP1K
LC1D115 -
D150
Note
LC7K
LC8K
Note K4
LC1F115 - LC1F265 - LC1F500 -
F225
Note F1, F2 Note F1, F2 Note F1, F2
LC1F800
Note F1,
F2, F3,
LC2K
Notes
K1, K2
LP2K LP4K
Note LP5K
K2, K3
LC1F780
Note F1, F2
Voltage Frequency
F400
F630
D1, D2, D4
Notes D1, D3
Note D1
50/60
-
-
-
-
-
KD
-
-
-
-
-
-
-
-
K7
-
K7
-
-
-
-
-
-
-
-
-
-
-
-
100
DC
-
50/60
50
F7
-
F7
-
F7
-
F7
F5
F6
-
F7
F5
F6
-
-
-
-
-
-
-
F5
F6
F7
FD
-
-
-
-
-
60
-
-
-
-
-
-
-
40-400
-
-
-
-
F7
FD
F7
FD
F7
FD
-
110
DC
-
-
FD
FD
FD
FD
FW
Low
Consump
DC
-
-
-
-
-
-
FW3
-
FL
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Wide Range
DC
FW
110/127
115
40-400
50/60
50
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
FE7
FE5
-
-
FE7
FE5
-
-
-
-
-
-
FE7
FE7
FE7
FE7
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
FE5
FE7
-
-
-
-
40-400
50/60
50
FE7
FE7
FE7
G7
-
G7
-
G7
-
G7
-
G7
-
-
-
-
-
-
-
-
-
-
-
60
-
-
-
G6
G6
G6
G7
Note F5
40-400
DC
-
-
-
-
-
-
-
-
-
-
-
-
-
-
G7
-
F7
-
F7
-
-
120
-
-
FW
Low
Consump
DC
-
-
-
GW3
-
-
-
-
-
-
-
125
127
DC
50/60
60
-
-
-
GD
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
GD
GD
GD
GD
GD
GD
GD
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
FC7
-
FC7
-
FC7
-
G5
G7
-
-
-
-
-
-
-
-
-
G5
FC5
-
-
-
40-400
DC
-
-
-
-
-
G7
G7
G7
155
174
-
-
PD
-
-
-
-
-
-
DC
-
-
QD
-
-
L7
-
-
-
-
-
-
-
50/60
DC
-
-
-
L7
-
-
-
-
200
-
-
LD
-
-
-
-
-
-
50/60
60
L7
-
-
-
-
-
-
-
-
-
-
200/208
-
-
-
-
-
L6
-
-
-
-
40-400
50/60
60
-
-
-
-
-
-
L7
L7
L7
-
-
-
LE7
LE7
L6
-
LE7
L6
-
-
-
-
-
208
-
-
-
-
-
-
-
-
40-400
50/60
50
-
-
-
-
M7
-
L7
-
-
-
-
-
-
-
-
M7
-
-
M7
-
M7
M5
M6
-
-
-
-
M5
M6
M7
-
-
-
-
60
-
-
-
M6
-
-
-
-
40-400
DC
-
-
-
-
M7
MD
M7
MD
M7
MD
220
-
-
MD
MD
MD
MD
Low
Consump
DC
-
-
-
-
-
-
-
-
ML
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Wide Range
DC
MW
50/60
50
M7
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
M5
-
-
220/230
220/240
60
-
-
-
-
-
-
-
-
40-400
DC
-
MD
-
-
40-400
DC
P7
MW
-
33
08/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ IEC-Style Contactors and Starters Selection Guide
Voltage Code Tables
Voltage Code Tables (Continued) _ See notes pertaining to each product line at the end of this table.
K-line
D-line
LC1D09 -
D38
LC2D09 -
D38
F-line
LC1D40 -
D95
LC2D40 -
D95
LC1K
LP1K
LC1D115 -
D150
Note
LC7K
LC8K
Note K4
LC1F115 - LC1F265 - LC1F500 -
F225
Note F1, F2 Note F1, F2 Note F1, F2
LC1F800
Note F1,
F2, F3,
LC2K
Notes
K1, K2
LP2K LP4K
Note LP5K
K2, K3
LC1F780
Note F1, F2
Voltage Frequency
F400
F630
D1, D2, D4
Notes D1, D3
Note D1
50/60
50
P7
-
-
-
-
-
-
-
-
-
-
-
P7
U7
-
P7
P5
-
P7
P5
-
-
P5
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
230
230/240
240
60
40-400
DC
-
-
-
-
-
-
-
-
P7
-
P7
-
P7
-
P7
-
MPD
-
-
-
U7
Note K4
50/60
U7
-
-
-
-
-
-
-
-
-
-
50/60
50
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
U7
U7
U5
U6
-
U7
U5
U6
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
U5
U6
U7
-
60
-
-
-
-
-
40-400
DC
-
U7
-
U7
-
U7
-
MUD
UD
-
-
-
DC
UD
UD
UD
UD
UD
UD
UD
Low
Consump
DC
250
-
-
-
-
UL
-
-
-
-
-
-
-
50/60
50
W7
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
W5
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
256
277
-
-
-
-
-
50/60
50
UE7
W7
UE7
W6
-
-
-
-
-
-
-
-
-
-
-
-
W6
-
W5
-
-
W7
-
-
W7
-
-
W7
-
40-400
50/60
50
-
Q7
-
Q7
-
Q7
Q5
Q6
-
-
Q5
Q6
Q7
-
-
-
380
60
-
Q6
-
-
-
-
40-400
-
Q7
Q7
Q7
Q7
NOte K4
50/60
-
-
-
-
-
-
-
-
-
-
-
50
60
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Q5
-
-
-
-
-
-
-
-
380/400
-
-
-
-
-
-
-
40-400
DC
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
QW
380/440
400
40-400
50/60
50
-
-
-
-
-
-
-
-
V7
-
V7
V7
V7
V5
-
V7
V5
-
-
-
-
-
-
-
V5
V7
-
-
-
-
-
40-400
50/60
50/60
50
-
-
V7
V7
V7
-
400/415
415
N7
-
-
-
-
-
-
-
-
-
N7
N7
N5
-
N7
N5
-
-
-
-
-
-
-
N5
N7
-
-
-
-
-
40-400
50
-
-
N7
N7
N7
-
-
-
-
-
-
-
-
-
415-440
440
40-400
50/60
50
-
-
-
-
-
-
-
-
-
R7
-
R7
R7
R5
R6
-
R7
R5
R6
-
-
-
-
-
-
-
-
-
-
-
-
-
60
-
-
R6
R7
-
-
-
-
40-400
DC
-
-
RD
-
R7
R7
R7
RD
-
-
-
RD
-
RD
-
RD
RD
-
440/460
460/480
DC
-
RD
Q5
-
-
-
-
-
-
-
-
-
-
-
-
60
-
-
-
-
-
-
50/60
50
T7
-
T7
-
-
T7
-
-
-
-
-
-
-
480
60
-
-
T6
T6
-
N7
-
S7
Note F4
40-400
-
-
-
-
-
-
-
-
-
-
-
34
© 2001-2004 Schneider Electric All Rights Reserved
08/04
TeSys™ IEC-Style Contactors and Starters Selection Guide
Voltage Code Tables
Voltage Code Tables (Continued) _ See notes pertaining to each product line at the end of this table.
K-line
D-line
LC1D09 -
D38
LC2D09 -
D38
F-line
LC1D40 -
D95
LC2D40 -
D95
LC1K
LP1K
LC1D115 -
D150
Note
LC7K
LC8K
Note K4
LC1F115 - LC1F265 - LC1F500 -
F225
Note F1, F2 Note F1, F2 Note F1, F2
LC1F800
Note F1,
F2, F3,
LC2K
Notes
K1, K2
LP2K LP4K
Note LP5K
K2, K3
LC1F780
Note F1, F2
Voltage Frequency
F400
F630
D1, D2, D4
Notes D1, D3
Note D1
50/60
S7
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
S7
-
S5
-
S7
-
S5
S7
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
500
575
600
50
40-400
50/60
60
-
-
S5
-
-
S7
-
-
-
S7
-
S7
-
SC7
SC7
-
-
-
X7
-
-
X7
-
S6
-
-
-
-
-
-
50/60
60
-
-
-
-
-
X6
-
-
-
-
-
-
40-400
50
-
-
-
-
-
X7
-
-
-
Y5
-
Y5
-
-
-
-
-
660
60
-
-
Y6
-
-
-
-
660/690
50/60
Y7
-
-
-
-
-
-
Notes:
K-Line:
K1 Up to and including 240 V, coil with integral suppression device (bi-directional diode): add 2 to the requested voltage code. Ex. J72
K2 For voltage codes B7 or BD, when connecting an electronic sensor or timer in series with the coil of the control relay, select a 20 V coil
(Voltage code Z7 for AC or ZD for DC). This coil compensates for incurred voltage drop.
K3 Coil with integral suppression device available (bidirectional diode): add 3 to the requested voltage code. Ex JD3.
K4 For voltage codes M7, U7, Q7, N7, Y7 and all LC7K and LC8K devices, operating range is 0.85 - 1.10 of nominal. For all other LC1K and
LC2K the operating range is 0.80 - 1.15 of nominal.
D line:
D1 For operating ranges refer to technical data section of the D-line contactors. Ranges vary as a function of the current rating of the
contactor and type of supply (AC/DC)
D2 LC1-D150 Contactors utilize dual frequency 50/60 Hz. coils only. Single frequency coils are not available.
D3 LC1D09 -LC1D38 contactors with DC coil have integral suppression device (bi-directional diode) as standard.
D4 D115 and D150 coils have integral suppression device fitted as standard.
F-Line:
F1 For operating ranges refer to technical data section of the F-line contactors. Ranges vary as a function of the supply (AC/DC).
F2 For non-stock voltage codes, order contactor and coil separately. See page 202 - 209 for coils.
F3 Built in surge suppressor included on LC1F800 coils.
F4 For use with LC1F265 and LC1F330 only.
F5 For LC1-F400 contactor with 120VAC coil, use F7 code.
35
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ IEC-Style Contactors and Starters Selection Guide
Definitions and Comments
Definitions and Comments
The low oxygen atmosphere at high altitudes reduces the dielectric strength of the air and hence the rated operational
voltage of the contactor. It also reduces the cooling effect of the air and hence the rated operational current of the
contactor (unless the temperature drops at the same time).
Altitude
No derating is necessary up to 3000 m (9,840 ft.). Derating factors to be applied above this altitude for main pole
operational voltage and current (AC supply) are as follows.
3500 m
(11,480 ft.)
4000 m
(13,120 ft.)
4500 m
(14,760 ft.)
5000 m
(16,400 ft.)
Altitude
Rated operational voltage
Rated operational current
0.90
0.92
0.80
0.90
0.70
0.88
0.60
0.86
The temperature of the air surrounding the device, measured near to the device. The operating characteristics are given:
• with no restriction for temperatures between –5 and +55 °C (+23 and +131 °F)
• with restrictions, if necessary, for temperatures between –50 and +70 °C (–58 and +149 °F)
Ambient air
temperature
Rated operational
current (Ie)
This is defined taking into account the rated operational voltage, operating rate and duty, utilization category and
ambient temperature around the device.
Rated conventional
The current which a closed contactor can sustain for a minimum of 8 hours without its temperature rise exceeding the
thermal current (Ith) f limits given in the standards.
Permissible short
time rating
The current which a closed contactor can sustain for a short time after a period of no load, without dangerous
overheating.
This is the voltage value which, in conjunction with the rated operational current, determines the use of the contactor or
starter, and on which the corresponding tests and the utilization category are based. For three-phase circuits it is
expressed as the voltage between phases. Apart from exceptional cases such as rotor short-circuiting, the rated
operational voltage Ve is less than or equal to the rated insulation voltage Vi.
Rated operational
voltage (Ve)
Rated control circuit The rated value of the control circuit voltage, on which the operating characteristics are based. For AC applications, the
voltage (Vc)
values are given for a near sinusoidal wave form (less than 5% total harmonic distortion).
This is the voltage value used to define the insulation characteristics of a device and referred to in dielectric tests
determining leakage paths and creepage distances. As the specifications are not identical for all standards, the rated
value given for each of them is not necessarily the same.
Rated insulation
voltage (Vi)
Rated impulse
withstand voltage
(Vimp)
The peak value of a voltage surge which the device is able to withstand without breaking down.
Rated operational
power (expressed in
kW)
The rated power of the standard motor which can be switched by the contactor, at the stated operational voltage.
Rated breaking
capacity q
This is the current value which the contactor can break in accordance with the breaking conditions specified in the IEC
standard.
Rated making
capacity q
This is the current value which the contactor can make in accordance with the making conditions specified in the IEC
standard.
This is the ratio between the time the current flows (t) and the duration of the cycle (T)
t
t
m =
On-load factor (m)
T
T
Cycle duration: duration of current flow + time at zero current
The impedance of one pole is the sum of the impedance of all the circuit components between the input terminal and
the output terminal. The impedance comprises a resistive component (R) and an inductive component (X=Lω). The total
impedance therefore depends on the frequency and is normally given for 50 Hz. This average value is given for the pole
at its rated operational current.
Pole impedance
This is the average number of on-load operating cycles which the main pole contacts can perform without maintenance.
The electrical durability depends on the utilization category, the rated operational current and the rated operational
voltage.
Electrical durability
This is the average number of on-load operating cycles (i.e. with zero current flow through the main poles) which the
contactor can perform without mechanical failure
Mechanical durability
f
Conventional thermal current, in free air, conforming to IEC standards.
q
For AC applications, the breaking and making capacities are expressed by the rms value of the symmetrical component of the short-circuit current. Taking into account the maximum
asymmetry which may exist in the circuit, the contacts therefore have to withstand a peak asymmetrical current which may be twice the rms symmetrical component.
NOTE: These definitions are extracted from standard IEC 60947-1.
36
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ K-Line
Mini-Contactors, Overload Relays,
and Accessories
Catalog
File 8502
K-Line
04
CONTENTS
Description
Page
General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Mini-contactors
Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Selection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
K-line Voltage Code Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Auxiliary Contacts and Timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Dimensions and Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Schematics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Overload Relays
Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Selection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Dimensions, Mounting, and Schematics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Low-consumption Mini-contactors
Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Selection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Auxiliary Contacts, Timers, and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Dimensions and Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Schematics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
TeSys™ K-line Mini-Contactors and Starters
General Information
General Information
K-line Mini-contactors, and Overload Relays are ideal for general-duty applications where small size and
reliability are key concerns. They feature:
•
Three contactor ratings for the USA market:
— K06 rated for 3 HP motors at 480 Vac or 600 Vac.
— K09 rated for 5 HP motors at 480 Vac or 600 Vac.
— K12 rated for 7.5 HP motors at 480 Vac or 10 HP at 600 Vac.
•
Space savings — the special magnet and armature structure allow for a DC coil-operated device with
the same physical size and panel footprint of the AC coil version.
•
•
•
IP20-rated touch-safe terminals with both North American and International terminal markings
Mountable on 35mm DIN rail or panel mount with screws
Available in 3-pole contactor versions with built-in auxiliary contact for holding circuit or 4-pole
contactor versions.
•
Easily-installed accessories.
— 2-pole or 4-pole instantaneous auxiliary contact blocks with screw clamp, slip-on, or spring
terminals.
— Transient voltage surge suppressors.
— Electronic 1 to 30 second on-delay timers.
•
Four wiring methods to reduce installation time:
— Captive screw terminals for use with either Phillips or slotted head screwdrivers.
— Slip-on terminals for quick installation of single 1/4" or double 1/8" tabs.
— Terminal pins for soldering the contactor directly to a printed circuit board.
— Spring terminals for extreme-vibration applications.
•
•
Control circuit flexibility
All versions of the K-line mini-contactors are available with an AC, DC, or low-consumption DC
operating coil. The low-consumption DC coil operating device can be energized by a low level DC
signal from a computer or PLC and includes built-in transient suppression and LED “On” indicator.
Bimetallic overload relays
The K-line Class 10 bimetallic overload relays are ambient-compensated and include single-phase
sensitivity for phase unbalance and phase loss protection. Standard features include isolated N.C.
trip contact and N.O. alarm contact, manual or automatic reset function, tamper resistant window for
full load current settings, and Test trip button. Five pins connect to the contactor load side terminals
— three for the power circuit and two for the control circuit — which eliminate customer wiring for the
3-wire control holding circuit.
38
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ K-line Mini-Contactors and Starters
Characteristics of Type LC•K and LP•K Contactors
Characteristics of Type LC\bK and LP\bK Contactors
Environment
Conforming to IEC 60947
V
690
750
690
600
8
Conforming to VDE 0110 gr C
V
Rated insulation voltage (Vi)
Conforming to BS 5424, NF C 20-040
Conforming to CSA 22-2 No. 14, UL 508
V
V
Rated impulse withstand voltage (Vimp)
kV
Meetstheessential requirements
of the LV
Conforming to standards
IEC 60947, NF C 63-110, VDE 0660, BS 5424, UL508, CSA 22-2 No. 14
& EMC directives
E164862
NLDX
(Screw
Clamp)
E164862
NLDX2
(Slip-on &
Solder Pin)
LR 43364
321104
LC•K06, LC•K09, LC•K12
LP•K06, LP•K09, LP•K12
Approvals
Protective treatment
Degree of protection
Conforming to IEC 60068 (DIN 50016)
Conforming to VDE 0106
Storage
“TC” (Fungus-proof, tropicalization protection)
Protection against direct finger contact
- 50° to + 80°C (-58° to +176°F)
- 25° to + 50°C (-13° to +122°F)
2000 m (6562 ft.)
Ambient air temperature
around the device
Operation
Maximum operating altitude Without derating
Vertical axis
Horizontal axis
Operating position
Without derating
Without derating
Derate current carrying capability by 15% when
not mounted vertically
Conforming to UL 94
Self-extinguishing material V1
Flame resistance
Conforming to NF F 16-101 and 16-102
Conforming to requirement 2
Contactor open
10 gn
Shock resistance
(1/2 sine wave, 11 ms)
Contactor closed
15 gn
Contactor open
2 gn
Vibration resistance
5 to 300 Hz
Contactor closed
4 gn
Safe circuit separation
Cabling
Conforming to VDE 0106 and IEC 60536
SELV f, up to 400 V
Min
Max
Max to IEC 60947
—
Solid or stranded cable
Solid cable
AWG 1 x 18
mm2 1 x 1.5
mm2 1 x 0.75
mm2 1 x 0.34
2 x 14 or 1 x 12
2 x 4
1 x 4 + 1 x 2.5
2 x 2.5
Screw-clamp terminals
Slip-on connectors
Stranded cable without cable end
Stranded cable with cable end
Clip
2 x 4
1 x 1.5 + 1 x 2.5
1 x 1.5 + 1 x 2.5
2 x 2.8mm or 1 x 6.35mm (2 x 0.110 in. or 1 x 0.250 in.)
4 mm x 35 microns
Solder pins for
printed circuit board
With locating device between power
and control circuits
Tightening torque
Phillips no. 2 or 3/16” slotted head screwdriver 0.8 N•m (7lb.-in.)
Conforming to standards
Up to 5 contacts
Terminal referencing
EN 50005 and EN 50012
f
Safety extra low voltage.
39
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ K-line Mini-Contactors and Starters
Characteristics of Type LC•K and LP•K Contactors
Pole Characteristics
Conventional thermal current (Ith) For ambient temperature ≤ 50 °C (122 °F)
20 A
Rated operational frequency
50/60 Hz
Frequency limits of the
operational current
Up to 400 Hz
690 Vac
Rated operational voltage (Ve)
I rms conforming to NF C 63-110 and IEC 60947
LC•K06, LPI•K06, LC•K09, LP•K09
110 A
Rated making capacity
LC•K12, LP•K12
144 A
160 A
LC•K16
Conforming to NF C 63-110 and IEC 60947
220/
230 V
380/
400 V
660/
690 V
415 V
440 V
500 V
LC•K06, LP•K06, LC•K09, LP•K09 I rms
LC•K12, LP•K12
110 A
110 A
110 A
110 A
110 A
110 A
80 A
80 A
80 A
70 A
70 A
70 A
Rated breaking capacity
–
–
–
–
–
–
LC•K16
In free air for a time "t” from cold state
(θ ≤ 50 °C [122 °F])
≥ 15
min
1 s
5 s
10 s
30 s
1 min
3 min
Permissible short-time rating
LC•K06, LP•K06, LC•K09, LP•K09
LC•K12, LP•K12 LC•K16
By circuit breaker
90 A
85 A
80 A
60 A
75 A
45 A
55 A
40 A
50 A
20 A
25 A
115 A
105 A
100 A
Select in accordance with NEC and local codes
Short-circuit protection
Average impedance/pole
By fuses
Max 400% of motor FLA
At Ith and 50 Hz
3 mΩ
At Ith and 60 Hz
3.6 mΩ
Maximum rated operational current for a
temperature ≤ 50 °C (122 °F)
20 A
Maximum rated operational current for a
temperature ≤ 70 °C (158 °F)
16 A for Ve only
On-load factor
90%
13 A
15 A
19 A
60%
15 A
18 A
20 A
30%
18 A
19 A
20 A
300 op. cycles/hour
120 op. cycles/hour
30 op. cycles/hour
Rated operational current limits in relation to
on-load factor and operating frequency
Utilization in category AC-1:
resistive circuit, heating, lighting
(Ve ≤ 440 V)
Apply the following coefficients to the current values given
above. These take into account the often unbalanced current
distribution between poles
Increase in operational current by
paralleling of poles
2 poles in parallel: K = 1.60
3 poles in parallel: K = 2.25
4 poles in parallel: K = 2.80
220/
240 V
380/
415 V
440/
480 V
500/
600 V
660/
690 V
115 V
220 V
Operational power
according to the voltage
Voltage
50 or 60 Hz
1-phase
3-phase
0.37
kW
0.75
kW
LC•K06, LP•K06
LC•K09, LP•K09
Motor ratings
Motor ratings
1.5 kW 2.2 kW 3 kW
3 kW
4 kW
3 kW
4 kW
0.55
kW
1.1 kW 2.2 kW 4 kW
4 kW
5.5/4
Utilization in category AC-3
Squirrel cage motors
LC•K12, LP•K12
LC•K16
Motor ratings
Motor ratings
–
–
–
–
3 kW
4 kW
5.5 kW (480)
kW
4 kW
4 kW
4 kW
4 kW
5.5/4
7.5 kW (480)
kW
Op. cycles/hour
Power
600
900
1200
50%
Maximum operating rate (in operating cycles/
hour in relation to percentage of rated power)
100%
75%
200/
208
220/
240
460/
480
575/
600
115
220
Operational power
according to the voltage
Voltage
50 or 60 Hz
1-phase
3-phase
Utilization in category AC-3
Squirrel cage motors
LC•K06, LP•K06
LC•K09, LP•K09
LC•K12, LP•K12
LC•K16, LP•K16
Motor ratings
Motor ratings
Motor ratings
0.5 HP 1 HP
1.5 HP 1.5 HP 3 HP
3 HP
5 HP
0.5 HP 1.5 HP 2 HP
0.5 HP 1.5 HP 3 HP
3 HP
3 HP
5 HP
7.5 HP 10 HP
Not UL Listed or CSA Certified.
40
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ K-line Mini-Contactors and Starters
Characteristics of Type LC•K and LP•K Contactors
Control Circuit Characteristics
Type
LC1
LC2
LC7
LC8
LP1
LP2
Rated control circuit voltage (Vc)
12 to 690 Vac f
0.8 to 1.15 Vc
≥ 0.20 Vc
30 VA
24 to 230 Vac
0.85 to 1.1 Vc
≥ 0.10 Vc
3 VA
12 to 250 Vdc f
For operation q
For drop-out
Inrush
0.8 to 1.15 Vc
Control voltage limits
(≤ 50 °C [122 °F]) single voltage coil
≥ 0.10 Vc
3 W
Average consumption at 20 °C (68 °F) and at Vc
Heat dissipation
Sealed
4.5 VA
3 VA
3 W
1.3
3
3
Between coil energization and:
- opening of the N.C. contacts
- closing of the N.O. contacts
Between coil de-energization and:
- opening of the N.O. contacts
- closing of the N.C. contacts
5 to 15 ms
25 to 35 ms
30 to 40 ms
25 to 35 ms
30 to 40 ms
10 to 20 ms
Operating time at 20 °C (68 °F) and at Vc
10 to 20 ms
15 to 25 ms
2 ms
30 ms
40 ms
2 ms
10 ms
15 ms
2 ms
Maximum immunity to micro-breaks
Maximum operating rate
In operating cycles per hour
50/60 Hz coil
3600
3600
3600
10
–
5
–
10
–
5
–
–
–
5
Mechanical durability at Vc
In millions of operating cycles
DC coil
10
f
For mains supplies with a high level of interference (voltage surge > 800 V), use a suppressor module LA4KE1FC (50 to 129 V) or
LAFKE1UG (130 to 250 V); see page 56.
LC1K16: 0.85 to 1.15 Vc.
q
41
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ K-line Mini-Contactors and Starters
Characteristics of Type LC•K and LP•K Contactors
Auxiliary Contact Characteristics and Instantaneous Contact Blocks
On LC•K or LP•K
1
Number of contacts
On LA1K
2 or 4
Rated operational voltage (Ve)
Up to
690 Vac
690 Vac
690 Vac
750 Vac
600 Vac
10 A
Conforming to BS 5424
Conforming to IEC 60947
Conforming to VDE 0110 group C
Conforming to CSA C 22.2 No.14, UL 508
For ambient temperature ≤ 50 °C (122 °F)
Rated insulation voltage (Vi)
Conventional thermal current (lth)
Frequency of operational current
Up to 400 Hz
17 Vac
5 mA
V min (DIN 19 240)
Minimum switching capacity
I min
Short-circuit protection
Rated making capacity
Conforming to IEC 60947 and VDE 0660, gl fuse
10 A
Conforming to IEC 60947
I rms
110 A
1 s
80 A
Overload current
Permissible for
500 ms
100 ms
90 A
110 A
Insulation resistance
Non-overlap distance
> 10 mΩ
0.5 mm
Linked contacts conforming to INRS and BIA spec.
Operational power of contacts
conforming to IEC 60947
AC supply, category AC-15
DC supply, category DC-13
Electrical durability (valid up to 3600 operating cycles Electrical durability (valid up to 1200 operating cycles
per hour) on an inductive load such as the coil of an per hour, on an inductive load such as the coil of an
electromagnet: making current (power factor 0.7) = 10 electromagnet, without economy resistor, the time
times the breaking current (power factor 0.4). constant increasing with the load.
110/
127
220/
230
600/
690
V
24
48
440
V
24
48
110
220
440
600
1 million operating cycles
2 million operating cycles
10 million operating cycles
Occasional making capacity
VA
VA
VA
VA
48
17
7
96
34
14
240
86
440
158
66
880
317
132
1200
500
W
W
W
W
120
55
80
60
30
9
52
28
8
51
26
7
50
25
6
38
36
200
15
11
1000 2050 5000 10000 13000 9000
720
600
400
300
230
200
Power in broken VA
Power in broken W
16 000
10 000
8000
6000
5000
4000
1000
4
3
1
Breaking limit of contacts valid for
700
500
maximum of 50 operating cycles at 10 s
intervals (breaking current = making
current x power factor 0.7).
1
4
3000
2000
300
200
250
200
2
Electrical durability of contacts for:
- 1 million operating cycles (2a)
- 3 million operating cycles (2b)
-10 million operating cycles (2c).
1000
100
80
60
50
40
30
800
600
500
400
300
2a
140
100
2b
2c
3
Breaking limit of contacts valid for
2a
2b
200
maximum of 20 operating cycles at 10 s
intervals with current passing for 0.5 s
per operating cycle.
20
100
80
60
2c
10
8
6
50
20
4
Thermal limit.
40
24
48
110
120
220
380 500
440 690 V
12
24
110
220
440 600 V
48
42
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ K-line Mini-Contactors and Starters
Selection of Contactors for Motor Control
Selection of Contactors for Motor Control
General-Purpose Contactors for AC Control Circuits
The table below shows general-purpose contactors. The contactors mount on 35 mm DIN rails or with
4 mm (# 6) screws. The wire termination screws are in the open, “ready-to-tighten” position.
For information on add-on auxiliary contact blocks and accessories, see page 54 to 58.
Horsepower Ratings for North American Applications
Kilowatt Ratings for International Applications
Standard power ratings of 3-phase
Auxiliary
Contacts
Maximum Horsepower Rating
Category AC-3, 50/60 Hz
Rated
motors, 50/60 Hz in category AC-3
Max.
Catalog
Number
p q
operational
current,
up to 440 V
1-Phase
115/
3-Phase
200/
Inductive
Current
Type of Connection
Weight lb. (kg)
220 V
230 V
380 V
415 V
440/500 V
660/690 V
230/
220/
460/
575/
120 V 240 V 208 V 240 V 480 V 600 V
HP
HP
HP
HP
HP
HP
A
kW
kW
kW
A
N.O. N.C.
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
LC1K0610••
LC1K0601••
LC1K06107••
LC1K06017••
LC1K06105••
LC1K06015••
LC1K06103••
LC1K06013••
LC1K0910••
LC1K0901••
LC1K09107••
LC1K09017••
LC1K09105••
LC1K09015••
LC1K09103••
LC1K09013••
LC1K1210••
LC1K1201••
LC1K12107••
LC1K12017••
LC1K12105••
LC1K12015••
LC1K12103••
LC1K12013••
LC1K1610••
LC1K1601••
LC1K16107••
LC1K16017••
LC1K16105••
LC1K16015••
LC1K16103••
LC1K16013••
0.40 (0.180)
0.40 (0.180)
0.40 (0.180)
0.40 (0.180)
0.46 (0.210)
0.46 (0.210)
0.40 (0.180)
0.40 (0.180)
0.40 (0.180)
0.40 (0.180)
0.40 (0.180)
0.40 (0.180)
0.46 (0.210)
0.46 (0.210)
0.40 (0.180)
0.40 (0.180)
0.40 (0.180)
0.40 (0.180)
0.40 (0.180)
0.40 (0.180)
0.46 (0.210)
0.46 (0.210)
0.40 (0.180)
0.40 (0.180)
0.40 (0.180)
0.40 (0.180)
0.40 (0.180)
0.40 (0.180)
0.46 (0.210)
0.46 (0.210)
0.40 (0.180)
0.40 (0.180)
Screw clamp
Slip-on 1 x 0.25 in., or
2 x 0.11 in.
0.5
1
1.5
1.5
3
3
6
1.5
2.2
3
6
Solder pins for
printed circuit board
Spring terminals
Screw clamp
Slip-on 1 x 0.25 in.,
or 2 x 0.11 in.
0.5
1.5
2
3
5
5
9
2.2
4
4
9
Solder pins for
printed circuit board
Spring terminals
Screw clamp
Slip-on 1 x 0.25 in.,
or 2 x 0.11 in.
4 (> 440)
5.5 (440)
0.5
1.5
3
3
7.5
10
12
3
5.5
12
Solder pins for
printed circuit board
Spring terminals
Screw clamp
Slip-on 1 x 0.25 in.,
or 2 x 0.11 in.
Not for North American applications — not UL Listed or
CSA Certified
4 (440)
5.5 (440)
3
7.5
16
Solder pins for
printed circuit board
Spring terminals
p
q
Use voltage codes on page 52 “Voltage Code Table” to complete catalog number.
For mains supplies with a high level of interference (voltage surge > 800 V), use a suppressor module LA4KE1FC (50 to 129 V) or LA4KE1UG (130 to 250 V), see page 56.
LC1K0610••
LC1K06107••
LC1K09103••
43
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ K-line Mini-Contactors and Starters
Selection of Contactors for Motor Control
Sensitive-Environment Contactors for AC Control Circuits
The tables below show the kilowatt ratings (for international applications) and horsepower ratings (for
North American applications) of contactors for use in sensitive environments. They are recommended
for use in areas sensitive to noise, high interference mains supplies, and so forth. The contactors mount
on 35 mm DIN rails or with 4 mm (# 6) screws. The wire termination screws are in the open, “ready-to-
tighten” position, and include a coil with a built-in rectifier and suppressor.
For information on add-on auxiliary contact blocks and accessories, see page 54 to 58.
LC7K06105••
Horsepower Ratings for North American Applications
Maximum Horsepower Rating
Kilowatt Ratings for International Applications
Standard power ratings of 3-phase
Auxiliary
Contacts
Rated
Category AC-3, 50/60 Hz
motors, 50/60 Hz in category AC-3
Max.
Catalog
Number
p
operational
current,
440V up to:
Weight
lb. (kg)
1-Phase
115/
3-Phase
200/ 220/
Inductive
Current
Type of connection
220 V
230 V
380 V
415 V
440/500 V
660/690 V
230/
460/
575/
120 V 240 V 208 V 240 V 480 V 600 V
HP
HP
HP
HP
HP
HP
A
kW
kW
kW
A
N.O. N.C.
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
LC7K0610••
LC7K0601••
LC7K06107••
LC7K06017••
LC7K06105••
LC7K06015••
LC7K0910••
LC7K0901••
LC7K09107••
LC7K09017••
LC7K09105••
LC7K09015••
LC7K1210••
LC7K1201••
LC7K12107••
LC7K12017••
LC7K12105••
LC7K12015••
0.50 (0.225)
0.50 (0.225)
0.50 (0.225)
0.50 (0.225)
0.50 (0.225)
0.50 (0.225)
0.50 (0.225)
0.50 (0.225)
0.50 (0.225)
0.56 (0.255)
0.56 (0.255)
0.50 (0.225)
0.50 (0.225)
0.50 (0.225)
0.50 (0.225)
0.50 (0.225)
0.56 (0.255)
0.56 (0.255)
Screw clamp
Slip-on 1 x 0.25 in.,
or 2 x 0.11 in.
0.5
1
1.5
1.5
3
3
6
1.5
2.2
3
6
Solder pins for
printed circuit board
Screw clamp
Slip-on 1 x 0.25 in.,
or 2 x 0.11 in.
0.5
1.5
1.5
2
3
3
3
5
5
9
2.2
4
4
9
Solder pins for
printed circuit board
Screw clamp
4 (> 440)
5.5 (440)
Slip-on 1 x 0.25 in.,
or 2 x 0.11 in.
0.5
7.5
10
12
3
5.5
12
Solder pins for
printed circuit board
p
Use voltage codes on page 52 “Voltage Code Table” to complete catalog number.
44
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ K-line Mini-Contactors and Starters
Selection of Contactors for Motor Control
Three-Pole Contactors for DC Control Circuits
The table below shows the kilowatt ratings (for international applications) and horsepower ratings (for
North American applications) for three-pole contactors for DC control circuits. The contactors mount on
35 mm DIN rails or with 4 mm (# 6) screws. The wire termination screws are in the open, “ready-to-
tighten” position.
For information on add-on auxiliary contact blocks and accessories, see page 54 to 58.
Horsepower Ratings for North American Applications
Kilowatt Ratings for International Applications
Auxiliary
Contacts
Maximum Horsepower Rating
Category AC-3, 50/60 Hz
Standard power ratings of 3-phase
Rated
motors, 50/60 Hz in category AC-3
Max.
operationa
Catalog
Number
p
Type of
Connection
Weight
lb. (kg)
1-Phase
115/ 230/
3-Phase
200/
Inductive
Current
l current,
440V up
to:
220 V
230 V
380 V
415 V
440/500 V
660/690 V
220/
460/
575/
120 V 240 V 208 V
240 V 480 V 600 V
HP
HP
HP
HP
HP
HP
A
kW
kW
kW
A
N.O. N.C.
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
LP1K0610••
LP1K0601••
0.50 (0.225)
0.50 (0.225)
Screw clamp
LP1K06107•• 0.50 (0.225)
LP1K06017•• 0.50 (0.225)
LP1K06105•• 0.56 (0.255)
LP1K06015•• 0.56 (0.255)
LP1K06103•• 0.50 (0.225)
LP1K06013•• 0.50 (0.225)
Slip-on 1 x 0.25 in.,
or 2 x 0.11 in.
1.5
2.2
3
6
0.5
1
1.5
1.5
3
3
6
Solder pins for
printed circuit board
Spring terminals
Screw clamp
LP1K0910••
LP1K0901••
0.50 (0.225)
0.50 (0.225)
LP1K09107•• 0.50 (0.225)
LP1K09017•• 0.50 (0.225)
LP1K09105•• 0.50 (0.225)
LP1K09015•• 0.56 (0.255)
LP1K09103•• 0.50 (0.225))
LP1K09013•• 0.50 (0.225)
Slip-on 1 x 0.25 in.,
or 2 x 0.11 in.
2.2
4
4
9
0.5
1.5
2
3
5
5
9
Solder pins for
printed circuit board
Spring terminals
Screw clamp
LP1K1210••
LP1K1201••
0.50 (0.225)
0.50 (0.225)
LP1K12107•• 0.50 (0.225)
LP1K12017•• 0.50 (0.225)
LP1K12105•• 0.56 (0.255)
LP1K12015•• 0.56 (0.255)
LP1K12103•• 0.50 (0.225)
LP1K12013•• 0.50 (0.225)
Slip-on 1 x 0.25 in.,
or 2 x 0.11 in.
4 (> 440 V)
5.5 (440 V)
3
5.5
12
0.5
1.5
3
3
7.5
10
12
Solder pins for
printed circuit board
Spring terminals
p
Use voltage codes on page 52 “Voltage Code Table” to complete catalog number.
LP1K06107••
LP1K0610••
45
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ K-line Mini-Contactors and Starters
Selection of Contactors for Resistive Loads
Selection of Contactors for Resistive Loads
Three- and Four-Pole Contactors for AC Control Circuits
The tables below show general-purpose and sensitive-environment three- and four-pole contactors for
AC control circuits. (The sensitive-environment contactors are recommended for use in areas sensitive
to noise, high interference mains supplies, and so forth.) The contactors mount on 35 mm DIN rails or
with 4 mm (# 6) screws. The wire termination screws are in the open, “ready-to-tighten” position. In
addition, the sensitive-environment contactors include a coil with a built-in rectifier and suppressor.
For information on add-on auxiliary contact blocks and accessories, see page 54 to 58.
General-Purpose Contactors f
Power
Poles
Auxiliary
Contacts
Non-inductive loads
Category AC-1
Catalog
Number
p
Maximum current at
≤ 50 °C (122 °F)
Type of Connection
Weight lb. (kg)
A
N.O. N.C. N.O. N.C.
3
3
4
2
3
3
4
2
3
3
4
2
3
3
4
2
–
–
–
2
–
–
–
2
–
–
–
2
–
–
–
2
1
–
–
–
1
–
–
–
1
–
–
–
1
–
–
–
–
1
–
–
–
1
–
–
–
1
–
–
–
1
–
–
LC1K0910••
LC1K0901••
LC1K09004••
LC1K09008••
LC1K09107••
LC1K09017••
0.56 (0.255)
0.56 (0.255)
0.40 (0.180)
0.40 (0.180)
0.56 (0.255)
0.56 (0.255)
0.40 (0.180)
0.40 (0.180)
0.56 (0.255)
0.56 (0.255)
0.46 (0.210)
0.46 (0.210)
0.56 (0.255)
0.56 (0.255)
0.46 (0.210)
0.46 (0.210)
Screw clamp
Slip-on 1 x 0.25 in. or 2 x 0.11 in.
Solder pins for printed circuit board
Spring terminals
LC1K090047••
LC1K090087••
LC1K09105••
LC1K09015••
LC1K090045••
LC1K090085••
LC1K09103••
LC1K09013••
LC1K090043••
LC1K090083••
20
LC1K09004••
Sensitive-environment Contactors
3
3
4
2
3
3
4
2
3
3
4
2
–
–
–
2
–
–
–
2
–
–
–
2
1
–
–
–
1
–
–
–
1
–
–
–
–
1
–
–
–
1
–
–
–
1
–
–
LC7K0910••
0.56 (0.255)
0.56 (0.255)
0.56 (0.255)
0.56 (0.255)
0.56 (0.255)
0.56 (0.255)
0.56 (0.255)
0.56 (0.255)
0.56 (0.255)
0.56 (0.255)
0.56 (0.255)
0.56 (0.255)
LC7K0901••
Screw clamp
LC7K09004••
LC7K09008••
LC7K09107••
LC7K09017••
LC7K090047••
LC7K090087••
LC7K09105••
LC7K09015••
LC7K090045••
LC7K090085••
20
Slip-on 1 x 0.25 in. or 2 x 0.11 in.
Solder pins for printed circuit board
f
For mains supplies with a high level of interference (voltage surge > 800 V), use a suppressor module LA4KE1FC (50 to 129 V) or
LAFKE1UG (130 to 250 V), see page 56.
LC7K090047••
p
Use voltage codes on page 52 “Voltage Code Table” to complete catalog number.
46
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ K-line Mini-Contactors and Starters
Selection of Contactors for Resistive Loads
Three- and Four-Pole Contactors for DC Control Circuits
The table below shows three- and four-pole contactors for DC control circuits. The contactors mount on
35 mm DIN rails or with 4 mm (# 6) screws. The wire termination screws are in the open, “ready-to-
tighten” position.
For information on add-on auxiliary contact blocks and accessories, see page 54 to 58.
Power
Poles
Auxiliary
Contacts
Non-inductive loads
Category AC-1
Catalog
Number
p
Maximum current at
≤ 50 °C (122 °F)
Type of Connection
Weight lb. (kg)
A
N.O. N.C. N.O. N.C.
3
3
4
2
3
3
4
2
3
3
4
2
3
3
4
2
–
–
–
2
–
–
–
2
–
–
–
2
–
–
–
2
1
–
–
–
1
–
–
–
1
–
–
–
1
–
–
–
–
1
–
–
–
1
–
–
–
1
–
–
–
1
–
–
LP1K0910••
0.56 (0.225)
0.56 (0.225)
0.56 (0.225)
0.56 (0.225)
0.56 (0.225)
0.56 (0.225)
0.56 (0.225)
0.56 (0.225)
0.56 (0.225)
0.56 (0.225)
0.56 (0.225)
0.56 (0.225)
0.56 (0.225)
0.56 (0.225)
0.46 (0.210)
0.46 (0.210)
LP1K0901••
Screw clamp
LP1K09004••
LP1K09008••
LP1K09107••
LP1K09017••
LP1K090047••
LP1K090087••
LP1K09105••
LP1K09015••
LP1K090045••
LP1K090085••
LC1K09103••
LC1K09013••
LC1K090043••
LC1K090083••v
LP1K09004••
Slip-on 1 x 0.25 in. or 2 x 0.11 in.
20
Solder pins for printed circuit
board
Spring terminals
p
Use voltage codes on page 52 “Voltage Code Table” to complete catalog number.
47
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ K-line Mini-Contactors and Starters
Selection of Reversing Contactors for Motor Control
Selection of Reversing Contactors for Motor Control
Three-Pole Reversing Contactors for AC Control Circuits
The table below shows three-pole reversing contactors with integrated mechanical interlock. The
contactors mount on 35 mm DIN rails or with 4 mm (# 6) screws. The wire termination screws are in the
open, “ready-to-tighten” position. Customer wiring is required to connect coil terminations to electrical
interlock; see page 60 (top row, center wiring diagram).
For information on add-on auxiliary contact blocks and accessories, see page 54 to 58.
Horsepower Ratings for North American Applications
Kilowatt Ratings for International Applications
Standard power ratings of 3-phase
Auxiliary
Contacts
Maximum Horsepower Rating
Category AC-3, 50/60 Hz
Rated
motors, 50/60 Hz in category AC-3
Max.
Catalog
Number
p c
Operational
Current,
up to 440 V
Weight
lb. (kg)
1-Phase
115/ 230/
120 V 240 V 208 V 240 V 480 V 600 V
3-Phase
Inductive
Current
Type of Connection
220 V
230 V
380 V
415 V
440/500 V
660/690 V
200/ 220/
460/
575/
HP
HP
HP
HP
HP
HP
A
kW
kW
kW
A
N.O. N.C.
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
LC2K0610••
LC2K0601••
LC2K06107••
LC2K06017••
LC2K06105••
LC2K06015••
LC2K06103••
LC2K06013••
LC2K0910••
LC2K0901••
LC2K09107••
LC2K09017••
LC2K09105••
LC2K09015••
LC2K09103••
LC2K09013••
LC2K1210••
LC2K1201••
LC2K12107••
LC2K12017••
LC2K12105••
LC2K12015••
LC2K12103••
LC2K12013••
LC2K1610••
LC2K1601••
LC2K16107••
LC2K16017••
LC2K16105••
LC2K16015••
LC2K16103••
LC2K16013••
0.86 (0.390)
0.86 (0.390)
0.81 (0.370)
0.81 (0.370)
0.95 (0.430)
0.95 (0.430)
0.86 (0.390)
0.86 (0.390)
0.86 (0.390)
0.86 (0.390)
0.86 (0.390)
0.86 (0.390)
0.95 (0.430)
0.95 (0.430)
0.86 (0.390)
0.86 (0.390)
0.86 (0.390)
0.86 (0.390)
0.86 (0.390)
0.86 (0.390)
0.95 (0.430)
0.95 (0.430)
0.86 (0.390)
0.86 (0.390)
0.86 (0.390)
0.86 (0.390)
0.86 (0.390)
0.86 (0.390)
0.95 (0.430)
0.95 (0.430)
0.86 (0.390)
0.86 (0.390)
Screw clamp q
Slip-on 1 x 0.25 in., or
2 x 0.11 in.
0.5
1
1.5
1.5
3
3
6
1.5
2.2
3
6
Solder pins for
printed circuit board
Spring terminals
Screw clamp q
Slip-on 1 x 0.25 in.,
or 2 x 0.11 in.
0.5
1.5
2
3
5
5
9
2.2
4
4
9
Solder pins for
printed circuit board
Spring terminals
Screw clamp q
Slip-on 1 x 0.25 in.,
or 2 x 0.11 in.
4 (> 440)
5.5 (440)
0.5
1.5
3
3
7.5
10
12
3
5.5
12
Solder pins for
printed circuit board
Spring terminals
Screw clamp q
Slip-on 1 x 0.25 in.,
or 2 x 0.11 in.
Not for North American applications — not UL Listed or
CSA Certified
4 (440)
5.5 (440)
3
7.5
16
Solder pins for
printed circuit board
Spring terminals
p
c
q
Use voltage codes on page 52 “Voltage Code Table” to complete catalog number.
For mains supplies with a high level of interference (voltage surge > 800 V), use a suppressor module LA4KE1FC (50 to 129 V) or LA4KE1UG (130 to 250 V), see page 56.
Pre-wired power circuit connections are standard on screw clamp versions.
LC2K09103••
LC2K0610••
LC2K06107••
48
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ K-line Mini-Contactors and Starters
Selection of Reversing Contactors for Motor Control
Sensitive-Environment Reversing Contactors for AC Control Circuits
The tables below show the kilowatt ratings (for international applications) and horsepower ratings (for
North American applications) for reversing contactors with mechanical interlock for use in sensitive
environments. They are recommended for use in areas sensitive to noise, high interference mains
supplies, and so forth. A coil with incorporated rectifier and suppressor is standard.
LC8K06105••
The contactors mount on 35 mm DIN rails or with 4 mm (# 6) screws. The wire termination screws are
in the open, “ready-to-tighten” position. Customer wiring is required to connect coil terminations to
electrical interlock; see page 60 (top row, center wiring diagram).
For information on add-on auxiliary contact blocks and accessories, see page 54 to 58.
Horsepower Ratings for North American Applications
Maximum Horsepower Rating
Kilowatt Ratings for International Applications
Standard power ratings of 3-phase
Auxiliary
Contacts
Rated
Category AC-3, 50/60 Hz
motors, 50/60 Hz in category AC-3
Max.
Catalog
Number
p
Operational
Current,
up to 440 V
Weight
lb. (kg)
1-Phase
115/
3-Phase
200/ 220/
Inductive
Current
Type of Connection
220 V
230 V
380 V
415 V
440/500 V
660/690 V
230/
460/
575/
120 V 240 V 208 V 240 V 480 V 600 V
HP
HP
HP
HP
HP
HP
A
kW
kW
kW
A
N.O. N.C.
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
LC8K0610••
LC8K0601••
LC8K06107••
LC8K06017••
LC8K06105••
LC8K06015••
LC8K0910••
LC8K0901••
LC8K09107••
LC8K09017••
LC8K09105••
LC8K09015••
LC8K1210••
LC8K1201••
LC8K12107••
LC8K12017••
LC8K12105••
LC8K12015••
1.05 (0.480)
1.05 (0.480)
1.00 (0.460)
1.00 (0.460)
1.14 (0.520)
1.14 (0.520)
1.05 (0.480)
1.05 (0.480)
1.00 (0.460)
1.00 (0.460)
1.14 (0.520)
1.14 (0.520)
1.05 (0.480)
1.05 (0.480)
1.00 (0.460)
1.00 (0.460)
1.14 (0.520)
1.14 (0.520)
Screw clamp q
Slip-on 1 x 0.25 in.,
or 2 x 0.11 in.
0.5
1
1.5
1.5
3
3
6
1.5
2.2
3
6
Solder pins for printed
circuit board
Screw clamp q
Slip-on 1 x 0.25 in.,
or 2 x 0.11 in.
0.5
0.5
1.5
1.5
2
3
3
3
5
5
9
2.2
4
4
9
Solder pins for printed
circuit board
Screw clamp q
4 (> 440)
5.5 (440)
Slip-on 1 x 0.25 in.,
or 2 x 0.11 in.
7.5
10
12
3
5.5
12
Solder pins for printed
circuit board
p
q
Use voltage codes on page 52 “Voltage Code Table” to complete catalog number.
Pre-wired power circuit connections are standard on screw clamp versions.
49
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ K-line Mini-Contactors and Starters
Selection of Reversing Contactors for Motor Control
Three-Pole Reversing Contactors for DC Control Circuits
The table below show the kilowatt ratings (for international applications) and horsepower ratings (for
North American applications) for three-pole reversing contactors with integrated mechanical interlock for
DC control circuits. The contactors mount on 35 mm DIN rails or with 4 mm (# 6) screws. The wire
termination screws are in the open, “ready-to-tighten” position. Customer wiring is required to connect
coil terminations to electrical interlock; see page 60 (top row, center wiring diagram).
For information on add-on auxiliary contact blocks and accessories, see page 54 to 58.
Horsepower Ratings for North American Applications
Maximum Horsepower ratings
Kilowatt Ratings for International Applications
Standard power ratings of 3-phase motors 50/
Auxiliary
Contacts
Rated
Maximum 60 Hz in category AC-3
Operation
al Current
in AC-3 up
to 400 V
Inductive
Current
in AC-3
Catalog
Number
p
1- phase
50/60 HZ
3- phase
50/60 HZ
Type of
Connection
Weight
lb. (kg)
220 V
230 V
380 V
415 V
440/500 V
660/690 V
115/
230/
200/
220/
460/
575/
Category
120 V 240 V 208 V 240 V 480 V 600 V
HP
HP
HP
HP
HP
HP
A
kW
kW
kW
A
N.O. N.C.
1
–
1
–
1
–
LP2K0610••
LP2K0601••
LP2K06107••
LP2K06017••
LP2K06105••
1.05 (0.480)
1.05 (0.480)
1.00 (0.460)
1.00 (0.460)
1.14 (0.520)
Screw clamp q
Slip-on 1 x 0.25
in. or 2 x 0.11 in.
0.5
1
1.5
1.5
3
3
6
1.5
2.2
3
6
Solder pins for
printed circuit
board
–
1
1
–
LP2K06015••
1.14 (0.520)
1
–
–
1
–
1
–
–
1
1
–
1
–
1
LP2K06103••
LP2K06013••
LP2K0910••
LP2K0901••
LP2K09107••
LP2K09017••
LP2K09105••
1.05 (0.480)
1.05 (0.480)
1.05 (0.480)
1.05 (0.480)
1.00 (0.460)
1.00 (0.460)
1.14 (0.520)
Spring terminal
Screw clamp q
Slip-on 1 x 0.25
in. or 2 x 0.11 in.
0.5
1.5
2
3
5
5
9
2.2
4
4
9
Solder pins for
printed circuit
board
1
1
–
LP2K09015••
1.14 (0.520)
LP2K09103••
LP2K09013••
LP2K1210••
LP2K1201••
LP2K12107••
LP2K12017••
LP2K12105••
1.14 (0.520)
1.14 (0.520)
1.05 (0.480)
1.05 (0.480)
1.00 (0.460)
1.00 (0.460)
1.14 (0.520)
Spring terminal
1
1
–
1
–
1
–
1
–
1
–
Screw clamp q
Slip-on 1 x 0.25
in. or 2 x 0.11 in.
4 (> 440)
5.5 (440)
0.5
1.5
3
3
7.5
10
12
3
5.5
12
Solder pins for
printed circuit
board
1
1
–
LP2K12015••
1.14 (0.520)
LP2K12103••
LP2K12013••
1.14 (0.520)
1.14 (0.520)
Spring terminal
1
p
q
Use voltage codes on page 52 “Voltage Code Table” to complete catalog number.
Pre-wired power circuit connections are standard on screw clamp versions.
LP2K0610••
LP2K06107••
50
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ K-line Mini-Contactors and Starters
Selection of Contactors for Resistive Loads
Selection of Reversing Contactors for Resistive Loads
Three- and Four-Pole Contactors for AC Control Circuits
The tables below show general purpose and sensitive-environment three-pole reversing and four-pole
change over contactors for AC control circuits. The sensitive-environment contactors are recommended
for use in areas sensitive to noise, high interference mains supplies, and so forth. The contactors
incorporate an integrated mechanical interlock.
Both types of contactors mount on 35 mm DIN rails or with 4 mm (# 6) screws. The wire termination
screws are in the open, “ready-to-tighten” position. In addition, the sensitive-environment contactors
include a coil with a built-in rectifier and suppressor. Customer wiring is required to connect coil
terminations to the electrical interlock; see page 60 (top row, center wiring diagram).
For information on add-on auxiliary contact blocks and accessories, see page 54 to 58.
General-Purpose Contactors f
Power
Poles
Auxiliary
Contacts
Non-inductive
loads Category
AC-1 Maximum
current at ≤ 50 °C
(122 °F)
Catalog
Number
p
Type of Connection
Weight lb. (kg)
A
N.O. N.C. N.O. N.C.
3
3
4
3
3
4
3
3
4
3
3
4
–
–
–
–
–
–
–
–
–
–
–
–
1
–
–
–
1
–
1
–
–
1
–
–
–
1
–
1
–
–
1
–
–
1
–
–
LC2K0910••
LC2K0901••
0.86 (0.390)
0.86 (0.390)
0.84 (0.380)
0.81 (0.370)
0.81 (0.370)
0.81 (0.370)
0.95 (0.430)
0.95 (0.430)
0.95 (0.430)
0.86 (0.390)
0.86 (0.390)
0.86 (0.390)
Screw clamp q
LC2K09004••
LC2K09004••
LC2K09107••
LC2K09017••
LC2K090047••
LC2K09105••
LC2K09015••
LC2K090045••
LC2K09103••
LC2K09013••
LC2K090043••
Slip-on 1 x 0.25 in. or 2 x 0.11 in.
Solder pins for circuit board
Spring terminals
20
Sensitive-Environment Contactors
3
3
4
3
3
4
3
3
4
–
–
–
–
–
–
–
–
–
1
–
–
–
1
–
1
–
–
–
1
–
1
–
–
1
–
–
LC8K0910•• f
LC8K0901•• f
LC8K09004••
LC8K09107••
LC8K09017••
LC8K090047••
LC8K09105••
LC8K09015••
LC8K090045••
1.05 (0.480)
1.05 (0.480)
1.03 (0.470)
1.01 (0.460)
1.01 (0.460)
1.01 (0.460)
1.14 (0.520)
1.14 (0.520)
1.14 (0.520)
Screw clamp q
20
Slip-on 1 x 0.25 in. or 2 x 0.11 in.
Solder pins for circuit board
LC8K09105••
f
For mains supplies with a high level of interference (voltage surge > 800 V), use a suppressor module LA4KE1FC (50 to 129 V) or
LAFKE1UG (130 to 250 V), see page 56.
p
q
Use voltage codes on page 52 “Voltage Code Table” to complete catalog number.
Pre-wired power circuit connections are standard on screw clamp versions.
51
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ K-line Mini-Contactors and Starters
Voltage Code Table
Voltage Code Table
Three- and Four-Pole Contactors for DC Control Circuits
The table below shows general-purpose three-pole reversing and four-pole change over contactors for
DC control circuits. The contactors incorporate an integrated mechanical interlock.
The contactors mount on 35 mm DIN rails or with 4 mm (# 6) screws. The wire termination screws are
in the open, “ready-to-tighten” position. Customer wiring is required to connect coil terminations to the
electrical interlock; see page 60 (top row, center wiring diagram).
For information on add-on auxiliary contact blocks and accessories, see page 54 to 58.
Power
Poles
Auxiliary
Contacts
Non-inductive loads
Category AC-1
Catalog
Number
p
Maximum current at
≤ 50 °C (122 °F)
Type of Connection
Weight lb. (kg)
LC2K09004••
A
N.O. N.C. N.O. N.C.
3
3
4
3
3
4
3
3
4
–
–
–
–
–
–
–
–
–
1
–
–
–
1
–
1
–
–
–
1
–
1
–
–
1
–
–
LP2K0910••
1.05 (0.480)
1.05 (0.480)
1.05 (0.480)
1.01 (0.460)
1.01 (0.460)
1.01 (0.460)
1.14 (0.520)
1.14 (0.520)
1.14 (0.520)
Screw clamp q
LP2K0901••
LP2K09004••
LP2K09107••
LP2K09017••
LP2K090047••
LP2K09105••
LP2K09015••
LP2K090045••
20
Slip-on 1 x 0.25 in. or 2 x 0.11 in.
Solder pins for circuit board
p
q
Use voltage codes below to complete the catalog number.
Pre-wired power circuit connections are standard on screw clamp versions.
K-line Voltage Code Table
K-line Voltage Code
K-line Voltage Code (Continued)
K-line (see notes at end of table)
K-line (see notes at end of table)
LC1K
LC2K
Notes
K1, K2
-
LP1K
LC1K
LC2K
Notes
K1, K2
LP1K
LP2K
Notes
K2, K3
LC7K
LC8K
Note K4
LC7K
LC8K
Note K4
Voltage
5
Frequency
Voltage
Frequency
LP2K
Notes
K2, K3
-
LP4K
LP5K
LP4K
LP5K
Low Consump
-
-
50/60
50
D7
D7
-
-
-
-
-
-
-
-
-
DC
50/60
42
-
-
-
-
-
J7
-
-
-
-
-
-
-
-
-
60
-
50
50/60
50
E7
-
E7
-
-
DC
-
JD
-
-
12
Low Consump
DC
60
-
-
-
-
-
-
-
-
JW3
-
40-400
DC
-
-
-
Wide Range
DC
48
-
-
ED
Low Consump
DC
-
-
-
-
-
-
EW3
-
50/60
50
Z7
-
-
-
-
-
-
-
-
-
-
-
-
-
Wide Range
DC
60
-
20
DC
ZD
50/60
DC
-
-
-
-
-
-
-
-
-
-
60
72
Low Consump
DC
ND
SD
-
-
-
-
ZW3
-
DC
B7
Note K2
Low Consump
DC
50/60
B7
-
-
-
-
-
-
-
-
-
SW3
50
60
-
-
-
-
-
-
-
-
-
-
-
-
Wide Range
DC
-
-
40-400
Low Consump
DC
96
24
36
BD
Note K2
DC
-
-
-
-
-
-
-
BW3
-
50/60
DC
-
-
-
-
-
KD
-
-
-
-
-
-
-
-
100
Low Consump
DC
-
-
50/60
50
F7
-
F7
-
Wide Range
DC
-
60
-
-
-
50/60
DC
C7
-
-
-
-
-
-
40-400
DC
-
-
-
CD
110
-
-
FD
Wide Range
DC
-
-
-
-
Low Consump
DC
-
-
-
-
-
-
FW3
-
Wide Range
DC
52
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ K-line Mini-Contactors and Starters
Voltage Code Table
K-line Voltage Code (Continued)
K-line Voltage Code (Continued)
K-line (see notes at end of table)
K-line (see notes at end of table)
LC1K
LC2K
Notes
K1, K2
LP1K
LP2K
Notes
K2, K3
LC1K
LC2K
Notes
K1, K2
LP1K
LP2K
Notes
K2, K3
LC7K
LC8K
Note K4
LC7K
LC8K
Note K4
Voltage
Frequency
Voltage
Frequency
LP4K
LP5K
LP4K
LP5K
110/127
115
40-400
50/60
50
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Q7
NOte K4
50/60
-
-
-
FE7
FE7
50
60
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
380/400
-
40-400
50/60
50
-
-
40-400
DC
-
G7
G7
-
-
-
-
-
-
-
-
-
380/440
400
40-400
50/60
50
-
60
V7
120
40-400
DC
-
40-400
50/60
50/60
50
-
Low Consump
DC
-
-
-
GW3
400/415
415
N7
125
127
DC
50/60
60
-
-
-
GD
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
FC7
-
-
-
-
-
-
40-400
50
-
40-400
DC
-
-
-
415-440
440
155
174
-
-
PD
40-400
50/60
50
-
DC
-
-
QD
R7
50/60
DC
-
-
-
-
200
-
-
LD
60
-
50/60
60
L7
-
-
-
40-400
DC
-
200/208
-
-
-
40-400
50/60
60
-
-
-
440/460
460/480
DC
-
-
-
-
60
-
208
220
-
-
-
50/60
50
T7
40-400
50/60
50
-
-
-
-
480
-
M7
-
-
60
-
-
-
-
40-400
50/60
50
-
60
-
-
S7
40-400
DC
-
-
-
500
575
600
-
-
-
MD
40-400
50/60
60
-
Low Consump
DC
SC7
-
-
-
-
-
-
-
-
-
X7
-
Wide Range
DC
50/60
60
50/60
50
M7
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
40-400
50
-
-
-
-
-
660
220/230
220/240
230
60
-
60
-
40-400
DC
-
-
660/690
50/60
Y7
-
-
Notes:
40-400
DC
-
-
K1 Up to and including 240 V, coil with integral suppression device (bi-directional diode): add
2 to the requested voltage code. Ex. J72
-
-
50/60
50
P7
-
-
K2 For voltage codes B7 or BD, when connecting an electronic sensor or timer in series with
the coil of the control relay, select a 20 V coil
(Voltage code Z7 for AC or ZD for DC). This coil compensates for incurred voltage drop.
K3 Coil with integral suppression device available (bidirectional diode): add 3 to the requested
voltage code. Ex JD3.
-
60
-
-
-
40-400
DC
-
-
MPD
U7
Note K4
K4 For voltage codes M7, U7, Q7, N7, Y7 and all LC7K and LC8K devices, operating range
is 0.85 - 1.10 of nominal. For all other LC1K and
230/240
240
50/60
U7
-
-
50/60
50
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
LC2K the operating range is 0.80 - 1.15 of nominal.
-
-
60
40-400
DC
-
MUD
UD
DC
250
256
277
Low Consump
DC
-
-
-
-
50/60
50
W7
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
50/60
50
UE7
-
-
-
-
-
-
40-400
50/60
50
380
60
40-400
53
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ K-line Mini-Contactors and Starters
Selection of Auxiliary Contacts and Timers
Selection of Auxiliary Contacts and Timers
XX
LC1/LC7/LP1K
LC1/LC7/LP1K
LC1/LC7/LP1K
LA1KN■■■
LA1KN■■
M
LA1KN■■
LA2KT2
■
LA1 KN■■
P
54
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ K-line Mini-Contactors and Starters
Selection of Auxiliary Contacts and Timers
Instantaneous Auxiliary Contact Blocks for Type LC•K and LP•K Contactors
Recommended for standard applications. Clip-on front mounting, 1 block per contactor
Auxiliary
Contacts
Type of Contactor
Catalog Number
Weight lb. (kg)
Type of Connection
N.O.
2
N.C.
–
LA1KN20
LA1KN02
LA1KN11
LA1KN40
LA1KN31
LA1KN22
LA1KN13
LA1KN04
LA1KN207
LA1KN027
LA1KN117
LA1KN407
LA1KN317
LA1KN227
LA1KN137
LA1KN047
LA1KN203
LA1KN023
LA1KN113
LA1KN403
LA1KN313
LA1KN223
LA1KN133
LA1KN043
0.10 (0.045)
0.10 (0.045)
0.10 (0.045)
0.10 (0.045)
0.10 (0.045)
0.10 (0.045)
0.10 (0.045)
0.10 (0.045)
0.10 (0.045)
0.10 (0.045)
0.10 (0.045)
0.10 (0.045)
0.10 (0.045)
0.10 (0.045)
0.10 (0.045)
0.10 (0.045)
0.10 (0.045)
0.10 (0.045)
0.10 (0.045)
0.10 (0.045)
0.10 (0.045)
0.10 (0.045)
0.10 (0.045)
0.10 (0.045)
–
2
1
1
LC1, LC2
LC7, LC8
LP1, LP2
3- or 4-pole
4
–
Screw Clamp
3
1
2
2
1
3
–
4
2
–
–
2
1
1
LC1, LC2
LC7, LC8
LP1, LP2
3- or 4-pole
4
–
Slip-on 1 x 0.25 in. or 2 x 0.11 in.
3
1
2
2
1
3
–
4
2
–
–
2
1
1
LC1, LC2
LP1, LP2
3- or 4-pole
4
–
Spring Terminals
3
1
2
2
1
3
–
4
With terminal referencing conforming to standard EN 50012. Clip-on front mounting, 1 block per contactor
–
1
3
2
1
1
2
1
1
2
3
1
LA1KN02M
LA1KN11M
LA1KN31M
LA1KN22M
LA1KN13M
LA1KN11P
0.10 (0.045)
0.10 (0.045)
0.10 (0.045)
0.10 (0.045)
0.10 (0.045)
0.10 (0.045)
LC1, LC2
LC7, LC8
LP1, LP2
3-pole + N.O.
Screw clamp with terminal referencing conforming to
standard EN 50012 q
LC1, LC2
LC7, LC8
LP1, LP2
4-pole
2
2
LA1KN22P
0.10 (0.045)
q
See pages 59 and 60 for actual terminal markings.
Electronic Time-Delay Auxiliary Contact Blocks for Type LC•K and LP•K Contactors
– Relay output, with common point changeover contact, AC or DC 240 Vac, 2 A maximum.
– Control voltage: 0.85 to 1.1 Vc.
– Maximum switching capacity: 250 VA or 150 W.
– Operating temperature: -10 to + 60 °C (14 to 140 °F).
– Reset time: 1.5 s during the time delay period, 0.5 s after the time delay period.
Clip-on front mounting, 1 block per contactor
Auxiliary
Contacts
Voltage
Timing
Range s
Type
Catalog Number
Weight lb. (kg)
V
SPDT
AC or DC 24 to 48
AC 110 to 240
On-delay
On-delay
1 to 30
1 to 30
1
1
LA2KT2E
LA2KT2U
0.09 (0.040)
0.09 (0.040)
55
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ K-line Mini-Contactors and Starters
Selection of Accessories
Selection of Accessories
Coil Suppressor Modules With an LED Indicator for Type LC•K and LP•K Contactors
Mounting and connection Type
For voltages:
Sold in lots of Catalog Number Weight lb. (kg)
AC and DC
12 to 24 V
5
5
5
5
5
5
5
LA4KE1B
LA4KE1E
LA4KE1FC
LA4KE1UG
LA4KC1B
LA4KC1E
LA4KA1U
0.02 (0.010)
0.02 (0.010)
0.02 (0.010)
0.02 (0.010)
0.02 (0.010)
0.02 (0.010)
0.02 (0.010)
AC and DC
32 to 48 V
Varistor c
AC and DC
50 to 129 V
Clip-on mounting on the front of
LC1 and LP1 contactors.
No tools required.
AC and DC
201 to 250 V
DC
12 to 24 V
Diode +
Zener diode f
DC
32 to 48 V
LA4K••
AC
RC q
220 to 250 V
c
Protection by limitation of the transient voltage up to 2 Vc maximum. Maximum reduction of transient voltage peaks.
Slight time delay on drop-out (1.1 to 1.5 times the normal time).
f
q
No overvoltage or oscillation frequency. Polarized component. Slight time delay on drop-out (1.1 to 1.5 times the normal time).
Protection by limitation of the transient voltage up to 3 Vc maximum and limitation of the oscillation frequency.
Slight time delay on drop-out (1.2 to 2 times the normal time).
Mounting and Marking Accessories
Description
Mounting plates c
Marker holder
Application
Sold in lots of Unit Catalog Number Weight lb. (kg)
For mounting on 1 ' rail
Clip-on
1
LA9D973
DX1AP25
LA9D90
0.05 (0.025)
0.14 (0.065)
0.002 (0.001)
0.004 (0.002)
110/120 mm mounting
centers
For mounting on 2 ' rails
10
100
25
Clip-on
Onto front of contactor
Strips of 10 identical
numbers 0 to 9
AB1R• q
4 maximum
per contactor
Clip-in markers
Strips of 10 identical
capital letters A to Z
25
AB1G• q
0.004 (0.002)
35mm " DIN rail (7.5mm deep x 2m long)
35mm " DIN rail (15mm deep x 2m long)
10
10
AM1DP200
AM1ED200
2.88 (1.310)
1.44 (0.650)
c
q
Order 1 mounting plate for a contactor and 2 mounting plates for a reversing contactor.
Complete the catalog number by replacing the • with the required number or character.
DX1AP25
Cabling Accessories
Sold in
lots of
Unit Catalog
Description
Application
Weight kg (lb.)
Number
LA9E01
LA9E02
For 2-poles
With screw clamp terminals
With screw clamp terminals
For contactors with screw
4
2
0.02 (0.010)
0.03 (0.015)
Paralleling links
For 4-poles
Power connections:
6 required per contactor
For 3-pole reversing
contactors for motor control clamp terminals
100
100
LA9K0969
LA9K0970
0.02 (0.010)
0.02 (0.010)
Power connections:
4 required per contactor
For 4-pole changeover
contactor pairs
For contactors with screw
clamp terminals
LA9E01
56
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ K-line Mini-Contactors and Starters
Dimensions and Mounting of Type LC•K and LP•K Contactors
Dimensions and Mounting of Type LC\bK and LP\bK Contactors
XXX
Contactors
LC1K, LC7K, LP1K
On panel
On mounting rail AM1DP200 or AM1DE200 1.4 in. (35 mm) DIN rail
4mm (#6) screws
LA1 K
57
45
2.24
1.78
31
57
=
35
=
1.22
2.24
1.38
45
1.78
On one asymmetrical rail DZ5MB with clip-on mounting plate
LA9D973
DX1AP25
DZ5 ME5
57
21
=
35
=
2.24
0.83
1.38
45
1.78
57
27
45
2.24
1.06
1.78
On printed circuit board
8.65
0.34
= = =
A1
A2
10xØ1.3
45
1.78
Electronic time-delay auxiliary contact blocks
LA2KT
On contactor
LA2 KT
38
1.50
34
1.34
34
57
1.34
2.24
Suppressor modules
LA4K•
On contactor
22
0.87
6
0.24
Inches
mm
Dimensions
22
0.87
57
2.24
57
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ K-line Mini-Contactors and Starters
Dimensions and Mounting of Type LC•K and LP•K Reversing Contactors
Dimensions and Mounting of Type LCkK and LPkK Reversing Contactors
Reversing contactors LC2K, LC8K, LP2K
On panel
On mounting rail AM1DP200 or AM1DE200 1.4 (35 mm) DIN rail
LA1K
4 mm (#6) screws
57
90
2.24
3.54
31
57
=
80
=
1.22
2.24
3.15
90
3.54
On one asymmetrical rail DZ5MB with 2 clip-on mounting plates LA9D973 or on 2 mounting plates DX1AP25.
2 x LA9D973
2 x DX1AP25
45
1.78
DZ5 ME5
=
35
=
57
21
1.38
2.24
0.83
90
3.54
57
27
90
2.24
1.06
3.54
On printed circuit board for reversing contactors or 2 contactors mounted side by side
8.65
0.34
= = =
= = =
8.65
0.34
A1
A2
A1
A2
20xØ1.3
45
1.78
45
1.78
Electronic time delay auxiliary contact blocks
LA2KT
On reversing contactors
LA2 KT
38
34
1.50
1.34
34
57
1.34
2.24
Suppressor modules
LA4K•
On reversing contactors
22
6
0.87
0.24
inches
mm
22
.87
57
2.24
Dimensions
58
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ K-line Mini-Contactors and Starters
Schematics
Schematics
Type LC•K and LP•K Contactors and Accessories
3-pole contactors
LC1K, LC7K, LP1K
Integrated-coil suppression device
LC7K
3-pole + N.O.
3-pole + N.C.
4-pole contactors
LC1K, LC7K, LP1K
Integrated-coil suppression device
LC7K
4-pole
2-pole N.O. + 2-pole N.C.
Instantaneous auxiliary contacts LA1K
For contactors LC•K and LP•K
2 N.O.
LA1KN20
LA1KN207
2 N.C.
LA1KN02
LA1KN027
1 N.O. + 1 N.C.
LA1KN11
LA1KN117
4 N.O.
LA1KN40
LA1KN407
3 N.O. + 1 N.C.
LA1KN31
LA1KN317
2 N.O. + 2 N.C.
LA1KN22
LA1KN227
1 N.O. + 3 N.C.
LA1KN13
LA1KN137
4 N.C.
LA1KN04
LA1KN047
Terminal referencing conforming to standard EN 50012
For 3-pole contactors
2 N.C.
1 N.O. + 1 N.C.
3 N.O. + 1 N.C.
2 N.O. + 2 N.C.
1 N.O. + 3 N.C.
LA1KN02M
LA1KN11M
LA1KN31M
LA1KN22M
LA1KN13M
For 4-pole contactors
1 N.O. + 1 N.C.
2 N.O. + 2 N.C.
LA1KN11P
LA1KN22P
Electronic time delay auxiliary contact blocks
LA2KT
For contactors LC•K and LP•K
Suppressor modules
1 C/O
LA4KC
LA4KE
AC/ DC
DC
+
−
59
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ K-line Mini-Contactors and Starters
Schematics
Type LC•K and LP•K Reversing Contactors and Accessories
3-pole reversing contactors
LC2K, LC8K, LP2K
With screw clamp terminals
Dashed lines indicate suggested
customer wiring to electrically
interlock coils
Integrated-coil suppression device
LC8K
3 P + N.O.
3 P + N.C.
With Slip-on connectors or solder pins (printed circuit board)
3 P+ N.O.
With Slip-on connectors or solder pins (printed circuit board)
3 P + N.C.
4-pole reversing contactors
LC2K, LC8K, LP2K
Integrated-coil suppression device
LC8K
With screw clamp terminals
4 P
With Slip-on connectors or solder pins (printed circuit board)
4 P
Instantaneous auxiliary contact blocks LA1K
For contactors LC•K and LP2K
2 N.O.
LA1KN20
LA1KN207
2 N.C.
LA1KN02
LA1KN027
1 N.O. + 1 N.C.
LA1KN11
LA1KN117
Terminal referencing conforming to standard EN 50012
1 N.O. + 1 N.C.
LA1KN11P
For contactors LC•K, LP2K
4 N.O.
LA1KN40
LA1KN407
3 N.O. + 1 N.C.
LA1KN31
LA1KN317
2 N.O. + 2 N.C.
LA1KN22
LA1KN227
1 N.O. + 3 N.C.
LA1KN13
LA1KN137
4 N.C.
LA1KN04
LA1KN047
For auxiliary contacts with terminal referencing conforming to standard EN 50012 see page 55.
Electronic time delay contact blocks
LA2KT
Suppressor modules
LA4KC
LA4KE
For contactors LC•K and LP•K
1 C/O
AC/ DC
DC
+
−
60
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ K-line Mini-Contactors and Starters
Characteristics of Type LR•K Overload Relays
Characteristics of Type LR\bK Overload Relays
Environment
Meets the essential
requirements of the
LV & EMC directives
Conforming to standards
IEC 60947, NF C 63-650, VDE 0660, BS 4941, UL 508, CSA 22.2 No. 14
LR43364
Product certifications
E164353
3211 03
NKCR
Protective treatment
Degree of protection
Conforming to IEC 60068 (DIN 50016)
Conforming to VDE 0106
Storage
“TC” (Fungus-proof, tropicalization protection)
Protection against direct finger contact
-40° to +70° C (-40 to +158° F)
Ambient air temperature
around the device
For normal operation (IEC 60947)
Operating limit
-20 to +55° C (-4 to +131° F) without derating
-30 to +60° C (-22 to +140° F) with derating c
2000 m (6562 ft.)
Maximum operating altitude
Without derating
Vertical axis
Horizontal axis
90°
90°
Operating positions
90°
90°
Without derating
With derating c
Conforming to UL 94
Self-extinguishing material V1
Flame resistance
Conforming to NF F 16-101 and 16-102 Conforming to requirement 2
Conforming to IEC 60068, N.C. contact
Conforming to IEC 60068, N.O. contact
Conforming to IEC 60068, N.C. contact
Conforming to IEC 60068, N.O. contact
10 gn
10 gn
2 gn
Shock resistance, hot state
(1/2 sine wave, 11 ms)
Vibration resistance, hot state
5 to 300 Hz
2 gn
Safe separation of circuits
Cabling
Conforming to VDE 0106 and IEC 60536 SELV, up to 400 V q
Minimum
Maximum
2 x 14 or 1 x 12
2 x 4
Maximum to IEC 60947
Solid or stranded cable
AWG 1 x 18
–
Solid cable
mm2 1 x 1.5
mm2 1 x 0.75
mm2 1 x 0.34
0.8 Nkm (7 lb.-in.)
1 x 4 + 1 x 2.5
2 x 2.5
Screw clamp terminals
Stranded cable without cable end
Stranded cable with cable end
Phillips no. 2 or 3/16" slotted head
2 x 4
1 x 1.5 + 1 x 2.5 1 x 1.5 + 1 x 2.5
Tightening torque
Mounting
Directly under the contactor or reversing contactor
Made automatically when mounted under the contactor, as follows:
- contactor terminal A2 connected to overload relay terminal 96 on all products,
Connections
- contactor terminal 14 connected to overload relay terminal 95 on products with 3 P + N.O.
When using 3 P + N.C., or 4 P contactors, or the N.O. auxiliary contact marked 13-14, at a voltage other than the
coil voltage, break off the link marked 14. (See page 64 for additional information.)
c
q
Please consult your Local Field Sales Office.
Safe extra low voltage.
Auxiliary Contact Characteristics
Number of contacts
1 N.C. + 1 N.O.
6
Conventional thermal current
A
A
Conforming to IEC 60947, VDE
0660. gl fuse or supplementary
protector GB2CB••
Short-circuit protection k
6 max.
220/
230
415/
440
600/
690
V
24
48
110
400
AC
Maximum power of the controlled
contactor coils (sealed) (Occasional
operating cycles of contact 95-96)
VA
V
100
24
200
48
400
110
50
600
220
45
600
250
35
600
–
600
–
DC
W
V
100
690
250
100
–
–
AC, category AC-15
DC, category DC-13
Maximum operational voltage
V
k
Select short circuit protection to meet the National Electrical Code or other local codes and standards.
61
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ K-line Mini-Contactors and Starters
Characteristics of Type LR•K Overload Relays
Electrical Characteristics of the Power Circuit
Rated operational voltage (Ve)
Up to
V
V
V
V
V
690
690
690
750
600
6
Conforming to BS 4941
Conforming to IEC 60947
Conforming to VDE 0110 group C
Conforming to UL 508, CSA 22.2 No. 14
Rated insulation voltage (Vi)
Rated impulse withstand voltage (Vimp)
kV
Up to 400
Frequency limits of the operational current
Power dissipated per pole
Hz
W
2
By circuit breaker
By fuses
Select in accordance with NEC and local codes
Maximum 400% of motor FLA
Short-circuit protection and coordination
Operating Characteristics
Sensitivity to phase failure
Conforming to IEC 60947
Manual or automatic
Yes
Selected by means of a lockable and sealable switch
on the front of the relay
Reset
Signalling
On front of relay
Trip indicator
Pressing the Reset-Stop button:
– Actuates the N.C. contact
Reset-Stop function
– Has no effect on the N.O. contact
Pressing the Test button enables:
– Checking of the control circuit wiring
– Simulation of overload tripping (actuation of both
N.C. and N.O. contacts, and of the trip indicator)
Test function
By pushbutton
Tripping curves
Average operating time
related to multiples of the
current setting Class 10 A
Time
2 h
Class 10 A
Time
2 h
Class 10 A
1h 20 min
1h 20 min
1 h
1 h
40 min
40 min
20 min
20 min
10 min
10 min
6 min
4 min
6 min
4 min
2 min
2 min
1 min
40 s
1 min
40 s
20 s
10 s
20 s
10 s
6 s
4 s
6 s
4 s
1
2
2 s
1s
2 s
1 s
1 1.2 1.5
2
3
4
5
6
8
10
15
1 1.2 1.5
2
3
4
5
6
8
10
x setting current (Ir)
Balanced 3-phase operation, from cold state.
15
x setting current (Ir)
Balanced operation with 2-phases only, from cold state.
1 = Setting: at lower end of scale.
2 = Setting: at upper end of scale.
62
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ K-line Mini-Contactors and Starters
Selection of Type LR•K Overload Relays
Selection of Type LR\bK Overload Relays
These overload relays are designed for the protection of motors. They are ambient-compensated and
phase-failure sensitive. They may be reset either manually or automatically.
For direct mounting, the relays are placed under the contactors with screw clamp terminals only
(pre-wired terminals; see page 64). For separate mounting, use terminal block LA7K0064 (see below).
The front face of the overload relay provides:
•
•
•
•
Selection of reset mode: Manual (marked H) or Automatic (marked A).
A red pushbutton for the Trip Test function.
A blue pushbutton for Stop and manual reset.
A yellow trip flag to indicate that the overload relay tripped.
Three-Pole Overload Relays with Screw Clamp Terminals
By circuit breaker
Select in accordance with NEC and local codes
Maximum 400% of motor FLA
Short-circuit protection for
North American applications
By fuses
European type fuses
Maximum rating
Type
Relay Setting
Range
Catalog Number
Weight lb. (kg)
aM
A
gl
A
BS88
A
A
Class 10 (the standard specifies a tripping time of between 2 and 10 seconds at 7.2 In)
0.11 to 0.16
0.16 to 0.23
0.23 to 0.36
0.36 to 0.54
0.54 to 0.8
0.8 to 1.2
1.2 to 1.8
1.8 to 2.6
2.6 to 3.7
3.7 to 5.5
5.5 to 8
0.25
0.25
0.5
1
0.5
0.5
1
–
LR2K0301
LR2K0302
LR2K0303
LR2K0304
LR2K0305
LR2K0306
LR2K0307
LR2K0308
LR2K0310
LR2K0312
LR2K0314
LR2K0316
LR2K0321 f
LR2K0322 f
0.32 (0.145)
0.32 (0.145)
0.32 (0.145)
0.32 (0.145)
0.32 (0.145)
0.32 (0.145)
0.32 (0.145)
0.32 (0.145)
0.32 (0.145)
0.32 (0.145)
0.32 (0.145)
0.32 (0.145)
0.32 (0.145)
0.32 (0.145)
–
LR2K0301
–
1.6
2
–
1
–
2
4
6
2
6
6
4
8
10
16
16
20
20
25
32
4
10
16
20
25
32
40
6
8
8 to 11.5
10
16
20
10 to 14
12 to 16
f
Not UL Listed or CSA Certified.
Overload Relays without Single-phase Sensitivity f
Class 10: To order, replace the prefix LR2 by LR7 in the catalog numbers selected from above (only applicable to overload relays LR2K0305
to LR2K0322). Example: LR7K0308.
f
Not UL Listed or CSA Certified.
Accessory
Description
Type of Connection
Catalog Number
LA7K0064
Weight lb. (kg)
Terminal block for separate clip-on mounting
of the overload relay on 35 mm DIN rail
Screw clamp
0.22 (0.100)
LA7K0064
63
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ K-line Mini-Contactors and Starters
Dimensions, Mounting, and Schematics for Type LR•K Overload Relays
Dimensions, Mounting, and Schematics for Type LR\bK Overload Relays
Protection Components
LR2K
Separate mounting with terminal block LA7K0064 on 1.4 in. (35 mm) DIN rail
Direct mounting beneath the contactor
(AM1DP200 or AM1DE200)
8
0.31
=
35
1.38
=
4mm
(#6) screws
75
45
2.95
1.77
c
AM1-
c
65
2.56
45
1.77
DP200
DE200
3.09 in. / 78.5mm
3.38 in. / 86mm
LR2K
LR2K + LC•K
Built-in wiring schematic
A
H
– KM1
95
96
Internal
Links
O
– KM1
97 95 98
96
Reset/stop
LR2K Overload Relays feature built-in wiring to save time and materials
when all five links of the overload relay are connected to a K-line
contactor with an integrated N.O. (normally-open) auxiliary contact.
Terminal 96 of the N.C. (normally-closed) overload relay contact (95-96)
will be internally linked in series with terminal A2 of the contactor
operating coil. Terminal 95 of the N.C. overload relay contact (95-96) will
be internally linked in series with terminal 14 of N.O. coil holding contact
(13-14) of the contactor. These internal links help to eliminate additional
wiring when using a conventional 3-wire control circuit similar to the
diagram shown.
L1
L2
Start
Stop
95
96
A2
A1
13 14
Internal
Links
If integrated wiring between contactor and
overload relay is not desired, break off the
two links on the overload relay as indicated.
64
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ K-line Mini-Contactors and Starters
Characteristics of Type LP•K Low-consumption Contactors
Characteristics of Type LP\bK Low-consumption Contactors
Environment
Conforming to IEC 60947
V
V
V
V
690
750
690
600
Conforming to VDE 0110 gr C
Rated insulation voltage (Vi)
Conforming to BS 5424, NF C 20-040
Conforming to CSA 22.2 No. 14, UL 508
Rated impulse withstand
voltage (Vimp)
kV
8
Meets the essential
requirements of the LV &
EMC directives
IEC 60947, NF C 63-110, VDE 0660, BS 5424, UL 508,
CSA 22.2 No. 14
Conforming to standards
Approvals
E164862
NLDX2
(Slip-on &
solder pin)
E164862
LR43364
3211 04
NLDX
LP•K06, LP•K09, LP•K12
(screw clamp)
Protective treatment
Degree of protection
Conforming to IEC 60068 (DIN 50016)
Conforming to VDE 0106
Storage
“TC” (Fungus-proof, Tropicalization protection)
Protection against direct finger contact
- 50 to + 80 °C (-58 to +176 °F)
- 25 to + 50 °C (-13 to +122 °F)
2000 m (6562 ft)
Ambient air temperature
around the device
Operation
Maximum operating altitude Without derating
Vertical axis
Horizontal axis
Operating positions
Derate current carrying capability by 15%
when not mounted vertically
Without derating
Without derating
Conforming to UL 94
Self-extinguishing materials V1
Flame resistance
Conforming to NF F 16-101 and 16-102
Conforming to requirement 2
Contactor open
Contactor closed
Contactor open
Contactor closed
10 g
15 g
2 g
Shock resistance
(1/2 sine wave, 11 ms)
Vibration resistance
5 to 300 Hz
4 g
Conforming to VDE 0106 and IEC
60536
Safe separation of circuits
Cabling
SELV, up to 400 V q
Min
Max
Max to IEC 60947
-
Solid or stranded cable
Solid cable
AWG 1 x 18
mm2 1 x 1.5
mm2 1 x 0.75
mm2 1 x 0.34
2 x 14 or 1 x 12
2 x 4
1 x 4 + 1 x 2.5
2 x 2.5
Screw clamp
terminals
Stranded cable without cable end
Stranded cable with cable end
Clip
2 x 4
1 x 1.5 + 1 x 2.5
1 x 1.5 + 1 x 2.5
Slip-on connectors
Solder pins for
2 x 2.8mm or 1 x 6.35mm (2 x 0.110 in. or 1 x 0.250 in.)
4 mm x 35 microns
With locating device between power
printed circuit board and control circuits
Phillips no. 2 or 3/16" slotted head
screwdriver
Tightening torque
0.8 to 1.3 N•m (7 to 11.5 lb.-in)
Up to 3 contacts
Conforming to standards EN 50005 and
EN 50012
Terminal referencing
q
Safe extra low voltage.
65
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ K-line Mini-Contactors and Starters
Characteristics of Type LP•K Low-consumption Contactors
Pole Characteristics
Conventional rated thermal current For ambient temperature
A
20
(Ith)
≤ 50 °C (122°F)
Rated operational frequency
Hz
Hz
V
50/60
Up to 400
690
Frequency limits of the operational
current
Rated operational voltage (Ve)
I rms conforming to NF C 63-110
and IEC 60947
A
Rated making capacity
LP•K06, LP•K09
LP•K12
110
144
Conforming to NF C 63-110 and
IEC 60947
220/
230
380/
400
660/
690
V
A
415
440
500
Rated breaking capacity
LP•K06, LP•K09
I rms
110
–
110
–
110
–
110
120
80
80
70
70
LP•K12
Open mounted, for a time “t” from
cold state (θ ≤ 50 °C [122 °F])
1 s
5 s
10 s
30 s
1 min
3 min
≥15 min
Permissible short time rating
LP•K06, LP•K09
LP•K12
90
115
85
105
80
100
60
75
45
55
40
50
20
25
A
By circuit breaker
By fuses
Select in accordance with NEC and local codes
Short-circuit protection
Max 400% of motor FLA
3
Average impedance per pole
At Ith and 50 Hz
mΩ
Maximum rated
operational current for a
temperature ≤ 50 °C (122 °F)
A
20
On-load factor
90%
13
60%
15
30%
18
Rated operational current limits
in relation to on-load factor and
operating frequency
300 op. cycles/hour
120 op. cycles/hour
30 op. cycles/hour
A
15
18
19
Utilization in category AC-1
resistive circuits, heating, lighting
(Ve ≤ 440 V)
19
20
20
Apply the following coefficients to the current values given above.
These take into account the often unbalanced current distribution
between poles
Increase in operational current
by paralleling poles
2 poles in parallel: K = 1.60
3 poles in parallel: K = 2.25
4 poles in parallel: K = 2.80
220/
240
380/
415
440/
480
500/
600
660/
690
Operational power
Voltage
115
220
according to the
50 or 60Hz
V
voltage
1-ph
1-ph
0.75
3-ph
1.5
3-ph
2.2
3-ph
3
3-ph
3
3-ph
3
Motor
ratings
LP•K06
kW 0.37
kW 0.55
Utilization in category AC-3
Squirrel cage motors
Motor
ratings
LP•K09
1.1
–
2.2
3
4
4
4
4
4
4
Motor
ratings
5.5
4 (480)
LP•K12
kW
–
5.5
Percent utilization of operational
power in relation to the maximum
operating rate
Op. cycles/h
Power
600
900
1200
50%
100%
75%
200/
208
220/
240
460/
480
575/
600
Operational power
according to the
voltage
Voltage
50 or
60Hz
115
220
V
1-ph
1-ph
1
3-ph
1.5
3-ph
1.5
3-ph
3
3-ph
3
Motor
ratings
LC•K06, LP•K06
LC•K09, LP•K09
HP 0.5
HP 0.5
Utilization in category AC-3
Squirrel cage motors
Motor
ratings
1.5
2
2
3
3
3
5
5
Motor
ratings
LC•K12, LP•K12
LC•K16, LP•K16
HP
1
7.5
10
Not for North American Applications. Not UL Listed or CSA Certified.
66
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ K-line Mini-Contactors and Starters
Characteristics of Type LP•K Low-consumption Contactors
Control Circuit Characteristics
Type
LP4
LP5
Rated control circuit voltage (Vc)
V
DC 12 to 72
0.7 to 1.30 Vc
≥ 0.10 Vc
1.8
For operation
For drop-out
Inrush
Control voltage limits
(≤ 50 °C [122 °F]) single-voltage coil
W
W
W
Average consumption at 20 °C (68 °F) and at Vc
Sealed
1.8
Heat dissipation
1.8
Between coil energization and:
- opening of the N.C. contacts
- closing of the N.O. contacts
ms
ms
25 to 35
30 to 40
Operating time at 20 °C (68 °F) and at Vc
Between coil de-energization and:
- opening of the N.O. contacts
- closing of the N.C. contacts
ms
ms
10 to 20
15 to 25
Maximum immunity to micro breaks
Maximum operating rate
ms
2
In operating cycles per hour
3600
30
Mechanical durability at Vc In millions of operating cycles Wide range DC coil
5
Auxiliary Contact Characteristics of Contactors and Instantaneous Contact Blocks
On LP4, LP5K
1
Number of contacts
On LA1K
2 max.
Rated operational voltage (Ve)
Up to
V
690
Conforming to BS 5424
Conforming to IEC 60947
Conforming to VDE 0110 group C
Conforming to CSA 22.2 No. 14, UL 508
V
690
V
690
Rated insulation voltage (Vi)
V
750
V
600
Conventional rated thermal current (lth) For ambient temperature ≤ 50 °C (122 °F)
A
10
Frequency of operational current
Hz
V
Up to 400
V min (DIN 19 240)
17 (reliability <10-8 at 24V)
Minimum switching capacity
I min
mA
A
5
Short-circuit protection
Rated making capacity
Conforming to IEC 60947 and VDE 0660, gl fuse
10
110
80
90
110
Conforming to IEC 60947
I rms
A
1 s
A
Overload current
Permissible for
500 ms
100 ms
A
A
Insulation resistance
Non-overlap distance
MΩ > 10
Linked contacts conforming to INRS and BIA specs. mm 0.5 (0.02")
Operational power of contacts
conforming to IEC 60947
AC supply, category AC-15
DC supply, category DC-13
Electrical durability (valid up to 3600 operating cycles
per hour) on an inductive load such as the coil of an
electromagnet: making current (power factor 0.7) = 10
times the breaking current (power factor 0.4).
Electrical durability (valid up to 1200 operating cycles
per hour) on an inductive load such as the coil of an
electromagnet, without economy resistor, the time
constant increasing with the load.
110/ 220/ 380/
600/
690
V
24
48
400
V
24
48
110 220 440 600
127
240
86
230
440
158
66
400
1 million operating cycles
3 million operating cycles
10 million operating cycles
Occasional making capacity
VA
VA
VA
VA
48
17
7
96
34
14
800 880 1200
288 317 500
120 132 200
W
W
W
W
120 80
60
30
9
52
28
8
51
26
7
50
25
6
55
15
38
11
36
1000 2050 5000 10000 14000 13000 9000
720 600 400 300 230 200
Power in broken VA
Power in broken W
16 000
1000
10 000
8000
6000
5000
4000
4
3
700
500
1
Breaking limit of contacts valid for
maximum of 50 operating cycles at 10
s intervals (breaking current = making
current x power factor 0.7).
1
4
3000
2000
300
200
250
200
2
Electrical durability of contacts for:
- 1 million operating cycles (2a)
- 3 million operating cycles (2b)
-10 million operating cycles (2c).
1000
100
80
60
50
40
30
800
600
500
400
300
2a
2b
140
100
3
Breaking limit of contacts valid for
2a
2b
200
maximum of 20 operating cycles at 10
s intervals with current passing for 0.5
s per operating cycle.
20
100
80
60
2c
2c
10
8
6
50
20
4
Thermal limit.
40
110
120
220
380 500
440 690 V
24
48
12
24
110
220
440 600 V
48
67
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ K-line Mini-Contactors and Starters
Selection of Low-consumption Contactors for Motor Control
Selection of Low-consumption Contactors for Motor Control
The table below shows three-pole contactors with low-consumption coils for DC control circuits. They
are compatible with programmable controller outputs, and incorporate an LED indicator. For wide-range
coils (0.7 to 1.3 Vc), a suppressor (zener diode) is fitted as standard (consumption is 1.8 W).
The contactors mount on 35 mm DIN rails or with 4 mm (# 6) screws. The wire termination screws are
in the open, “ready-to-tighten” position.
For information on add-on auxiliary contact blocks and accessories, see page 72.
Three-Pole Contactors with Low-consumption Coils for DC Control Circuits
Horsepower Ratings for North American Applications
Kilowatt Ratings for International Applications
Auxiliary
Contacts
Maximum Horsepower Rating
Category AC-3, 50/60 Hz
Standard power ratings of 3-phase
motors, 50/60 Hz in category AC-3
Rated
Max.
Catalog
Number
f p
Operational
Current,
up to 440 V
Weight
lb. (kg)
1-Phase
3-Phase
Inductive
Current
Type of Connection
220 V
230 V
380 V
415 V
440/500 V
660/690 V
115/
230/
200/
220/
460/
575/
120 V 240 V 208 V 240 V 480 V 600 V
HP
HP
HP
HP
HP
HP
A
kW
kW
kW
A
N.O. N.C.
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
LP4K0610•••
LP4K0601•••
LP4K06107•••
LP4K06017•••
LP4K06105•••
LP4K06015•••
LP4K06103•••
LP4K06013•••
LP4K0910•••
LP4K0901•••
LP4K09107•••
LP4K09017•••
LP4K09105•••
LP4K09015•••
LP4K09103•••
LP4K09013•••
LP4K1210•••
LP4K1201•••
LP4K12107•••
LP4K12017•••
LP4K12105•••
LP4K12015•••
LP4K12103•••
LP4K12013•••
0.52 (0.235)
0.52 (0.235)
0.52 (0.235)
0.52 (0.235)
0.265 (0.58)
0.58 (0.265)
0.52 (0.235)
0.52 (0.235)
0.52 (0.235)
0.52 (0.235)
0.52 (0.235)
0.52 (0.235)
0.58 (0.265)
0.58 (0.265)
0.52 (0.235)
0.52 (0.235)
0.52 (0.235)
0.52 (0.235)
0.52 (0.235)
0.52 (0.235)
0.58 (0.265)
0.58 (0.265)
0.52 (0.235)
0.52 (0.235)
Screw clamp
Slip-on 1 x 0.25 in., or
2 x 0.11 in.
0.5
1
1.5
1.5
3
3
6
1.5
2.2
3
6
Solder pins for
printed circuit board
Spring terminals
Screw clamp
Slip-on 1 x 0.25 in.,
or 2 x 0.11 in.
0.5
1.5
2
3
5
5
9
2.2
4
4
9
Solder pins for
printed circuit board
Spring terminals
Screw clamp
Slip-on 1 x 0.25 in.,
or 2 x 0.11 in.
4 (> 440)
5.5 (440)
1
2
3
3
7.5
10
12
3
5.5
12
Solder pins for
printed circuit board
Spring terminals
f
p
Standard control circuit voltages (variable delivery times, please consult your Local Square D Field Sales Office).
Use voltage codes on page 52 “Voltage Code Table” to complete catalog number.
LP4K06105•••
68
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ K-line Mini-Contactors and Starters
Selection of Low-consumption Reversing Contactors for Motor Control
Selection of Low-consumption Reversing Contactors for Motor Control
The table below shows three-pole reversing contactors with low-consumption coils for DC control
circuits. They are compatible with programmable controller outputs, and incorporate an LED indicator
and mechanical interlock. For wide-range coils (0.7 to 1.3 Vc), a suppressor (zener diode) is fitted as
standard (consumption is 1.8 W).
The contactors mount on 35 mm DIN rails or with 4 mm (# 6) screws. The wire termination screws are
in the open, “ready-to-tighten” position. Customer wiring is required to connect coil terminations to the
electrical interlock; see page 75 for more information.
For information on add-on auxiliary contact blocks and accessories, see page 72.
Three-Pole Reversing Contactors with Low-Consumption Coils for DC Control Circuits
Horsepower Ratings for North American Applications
Kilowatt Ratings for International Applications
Auxiliary
Contacts
Maximum Horsepower Rating
Category AC-3, 50/60 Hz
Standard power ratings of 3-phase
motors, 50/60 Hz in category AC-3
Rated
Max.
Catalog
Number
f p
Operational
Current,
up to 440 V
Weight
lb. (kg)
1-Phase
115/ 230/
120 V 240 V 208 V 240 V 480 V 600 V
3-Phase
Inductive
Current
Type of Connection
220 V
230 V
380 V
415 V
440/500 V
660/690 V
200/ 220/
460/
575/
HP
HP
HP
HP
HP
HP
A
kW
kW
kW
A
N.O. N.C.
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
–
1
LP5K0610•••
LP5K0601•••
LP5K06107•••
LP5K06017•••
LP5K06105•••
LP5K06015•••
LP5K06103•••
LP5K06013•••
LP5K0910•••
LP5K0901•••
LP5K09107•••
LP5K09017•••
LP5K09105•••
LP5K09015•••
LP5K09103•••
LP5K09013•••
LP5K1210•••
LP5K1201•••
LP5K12107•••
LP5K12017•••
LP5K12105•••
LP5K12015•••
LP5K12103•••
LP5K12013•••
1.08 (0.490)
1.08 (0.490)
1.03 (0.470)
1.03 (0.470)
1.17 (0.530)
1.17 (0.530)
1.08 (0.490)
1.08 (0.490)
1.08 (0.490)
1.08 (0.490)
1.03 (0.470)
1.03 (0.470)
1.17 (0.530)
1.17 (0.530)
1.08 (0.490)
1.08 (0.490)
1.08 (0.490)
1.08 (0.490)
1.03 (0.470)
1.03 (0.470)
1.17 (0.530)
1.17 (0.530)
1.08 (0.490)
1.08 (0.490)
Screw clamp q
Slip-on 1 x 0.25 in., or
2 x 0.11 in.
0.5
1
1.5
1.5
3
3
6
1.5
2.2
3
6
Solder pins for
printed circuit board
Spring terminals
Screw clamp q
Slip-on 1 x 0.25 in.,
or 2 x 0.11 in.
0.5
1.5
2
3
5
5
9
2.2
4
4
9
Solder pins for
printed circuit board
Spring terminals
Screw clamp q
Slip-on 1 x 0.25 in.,
or 2 x 0.11 in.
4 (> 440)
5.5 (440)
1
2
3
3
7.5
10
12
3
5.5
12
Solder pins for
printed circuit board
Spring terminals
f
q
p
Standard control circuit voltages (variable delivery times, please consult your Local Square D Field Sales Office.).
Pre-wired power circuit connections are standard on screw clamp versions.
Use voltage codes on page 52 “Voltage Code Table” to complete catalog number.
LP5K06105•••
69
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ K-line Mini-Contactors and Starters
Selection of Low-consumption Contactors for Resistive Loads
Selection of Low-consumption Contactors for Resistive Loads
Three- and Four-Pole Contactors with Low-consumption Coils for DC Control Circuits
The table below shows three- and four-pole contactors with low-consumption coils for DC control
circuits. They are compatible with programmable controller outputs, and incorporate an LED indicator.
For wide-range coils (0.7 to 1.3 Vc), a suppressor (zener diode) is fitted as standard (consumption is 1.8
W).
The contactors mount on 35 mm DIN rails or with 4 mm (# 6) screws. The wire termination screws are
in the open, “ready-to-tighten” position. For information on add-on auxiliary contact blocks and
accessories, see page 72.
Power Poles
Auxiliary Contacts
Non-inductive loads
Category AC-1
Maximum current at
≤ 50 °C (122 °F)
Catalog
Number
f p
Weight
lb. (kg)
Type of Connection
LP4K090047••
A
N.O.
N.C.
N.O.
1
N.C.
–
LP4K0910•••
0.52 (0.235)
0.52 (0.235)
0.52 (0.235)
0.52 (0.235)
0.52 (0.235)
0.52 (0.235)
0.52 (0.235)
0.52 (0.235)
0.58 (0.265)
0.58 (0.265)
0.58 (0.265)
0.58 (0.265)
0.52 (0.235)
0.52 (0.235)
0.52 (0.235)
0.52 (0.235)
3
–
–
1
LP4K0901•••
Screw clamp
4
2
–
2
–
–
LP4K09004•••
LP4K09008•••
LP4K09107•••
LP4K09017•••
LP4K090047•••
LP4K090087•••
LP4K09105•••
LP4K09015•••
LP4K090045•••
LP4K090085•••
LP4K09103•••
LP4K09013•••
LP4K090043•••
LP4K090083•••
–
–
1
–
3
–
–
1
Slip-on 1 x 0.25 in. or
2 x 0.11 in.
4
2
–
2
–
–
–
–
20
1
–
3
–
–
1
Solder pins for printed
circuit board
4
2
–
2
–
–
–
–
1
–
3
–
–
1
Spring terminals
4
2
–
–
–
–
–
–
f
p
Standard control circuit voltages (variable delivery times, please consult your Local Square D Field Sales Office.).
Use voltage codes on page 52 “Voltage Code Table” to complete catalog number.
70
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ K-line Mini-Contactors and Starters
Selection of Low-consumption Contactors for Resistive Loads
Three- and Four-Pole Contactors with Low-Consumption Coils for DC Control Circuits
The table below shows three-pole reversing and four-pole change over contactors with low-consumption
coils for DC control circuits. They are compatible with programmable controller outputs, and incorporate
an LED indicator and mechanical interlock. For wide-range coils (0.7 to 1.3 Vc), a suppressor (zener
diode) is fitted as standard (consumption is 1.8 W).
The contactors mount on 35 mm DIN rails or with 4 mm (# 6) screws. The wire termination screws are
in the open, “ready-to-tighten” position. Customer wiring is required to connect coil terminations to the
electrical interlock; see page 75 for more information.
LP5K0910•••
For information on add-on auxiliary contact blocks and accessories, see page 72.
Power Poles
Auxiliary Contacts
Non-inductive loads
Category AC-1
Maximum current at
≤ 50 °C (122 °F)
Catalog
Number
f p
Weight
lb. (kg)
Type of Connection
A
N.O.
3
N.C.
N.O.
1
N.C.
–
–
–
–
–
–
–
–
–
–
–
–
–
LP5K0910••• c
1.08 (0.490)
1.08 (0.490)
1.08 (0.490)
1.03 (0.470)
1.03 (0.470)
1.17 (0.530)
1.17 (0.530)
1.17 (0.530)
1.17 (0.530)
1.08 (0.490)
1.08 (0.490)
1.08 (0.490)
Screw clamp
3
–
1
LP5K0901••• c
LP5K09004•••
LP5K09107•••
LP5K09017•••
LP5K090047•••
LP5K09105•••
LP5K09015•••
LP5K090045•••
LP5K09103•••
LP5K09013•••
LP5K090043•••
4
–
–
3
1
–
Slip-on 1 x 0.25 in.
or 2 x 0.11 in.
3
–
1
4
–
–
20
3
1
–
Solder pins for printed
circuit board
3
–
1
4
–
–
3
1
–
Spring terminals
3
–
1
4
–
–
f
Standard control circuit voltages (variable delivery times, please consult your Local Square D Field Sales Office.).
c
p
WARNING: These reversing contactors are pre-wired for reverse motor operation
Use voltage codes on page 52 “Voltage Code Table” to complete catalog number.
71
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ K-line Mini-Contactors and Starters
Selection of Auxiliary Contacts and Accessories for Low-consumption Contactors
Selection of Auxiliary Contacts and Accessories for Low-consumption Contactors
Instantaneous Auxiliary Contact Blocks (clip-on front mounting, 1 block per contactor)
Auxiliary Contacts
Type of Connection
Type of Contactor
Catalog Number
Weight lb. (kg)
N.O.
2
N.C.
–
LA1KN20
LA1KN02
LA1KN11
LA1KN207
LA1KN027
LA1KN117
LA1KN203
LA1KN023
LA1KN113
0.10 (0.045)
0.10 (0.045)
0.10 (0.045)
0.10 (0.045)
0.10 (0.045)
0.10 (0.045)
0.10 (0.045)
0.10 (0.045)
0.10 (0.045)
Screw clamp
3- or 4-pole
3- or 4-pole
3- or 4-pole
–
2
1
1
LA1KN••
2
–
Slip-on 1 x 0.25 in. or 2 x 0.11 in.
–
2
1
1
2
–
Spring terminals
–
2
1
1
With terminal referencing conforming to EN 50012
–
1
1
2
1
1
LA1KN02M
LA1KN11M
LA1KN11P
0.10 (0.045)
0.10 (0.045)
0.10 (0.045)
3-pole, 6 and 9 A
4-pole, 9 A
Screw clamp k
k
See pages 75 and 76 for actual markings.
Electronic Time-Delay Auxiliary Contact Blocks
– Relay output, with common point changeover contact, AC or DC 240 V, 2 A maximum.
– Control voltage: 0.85 to 1.1 Vc.
– Maximum switching capacity: 250 VA or 150 W.
– Operating temperature: -10 to + 60 °C (14 to 140 °F).
– Reset time: 1.5 s during the time-delay period, 0.5 s after the time delay period.
Clip-on front mounting, 1 block per contactor
Auxiliary
Contacts
Voltage
Timing Range
Type
Catalog Number
LA2KT2E
Weight lb. (kg)
LA2KT2•
V
s
SPDT
AC or DC 24 to 48 (1)
On-delay
1 to 30
1
0.09 (0.040)
Mounting and Marking Accessories
Description
Application
Sold in lots of Unit Catalog No.
Weight lb. (kg)
For mounting on 1 rail
Clip-on
1
LA9D973
DX1AP25
LA9D90
0.05 (0.025)
Mounting plates
(order 1 for a contactor;
order 2 for a reversing contactor)
110/120 mm mounting
centers
For mounting on 2 rails
Clip-on
10
100
25
0.14 (0.065)
0.002 (0.001)
0.004 (0.002)
Marker holder
On to front of contactor
Strips of 10 identical
numbers 0 to 9 q
AB1R• q
Clip-in markers
4 maximum per contactor
Strips of 10 identical
capital letters A to Z q
25
AB1G• q
0.004 (0.002)
35mm " DIN rail (7.5 mm deep x 2 m long)
35mm " DIN rail (15 mm deep x 2 m long)
10
10
AM1DP200
AM1ED200
2.88 (1.310)
1.44 (0.650)
q
Complete the catalog number by replacing the • with the required number or character.
DX1AP25
Cabling Accessories
Description
Application
Sold in lots of Unit Catalog No.
Weight lb. (kg)
With screw clamp
terminals
For 2-poles
4
2
LA9E01
LA9E02
0.02 (0.010)
Paralleling links
With screw clamp
terminals
For 4-poles
0.03 (0.015)
0.02 (0.010)
0.02 (0.010)
For 3-pole reversing
contactors for motor
control
For contactors with screw
clamp terminals
Set of 6 power connections
Set of 4 power connections
100
100
LA9K0969
LA9K0970
For 4-pole changeover
contactor pairs
For contactors with screw
clamp terminals
(1) Low consumption K-line contactors are DC only.
LA9E01
72
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ K-line Mini-Contactors and Starters
Dimensions and Mounting of Low-consumption Contactors
Dimensions and Mounting of Low-consumption Contactorsxxxxx
Contactors
LP4K
On panel
On mounting rail AM1DP200 or AM1DE200 1.4 in. (35 mm) DIN rail
4mm (#6) screws
LA1 K
57
45
2.24
1.78
31
57
=
35
=
1.22
2.24
1.38
45
1.78
On one asymmetrical rail DZ5MB with clip-on mounting plate
LA9D973
DX1AP25
DZ5 ME5
57
21
=
35
=
2.24
0.83
1.38
45
1.78
57
27
45
2.24
1.06
1.78
On printed circuit board
8.65
0.34
= = =
A1
A2
10xØ1.3
45
1.78
Electronic time-delay auxiliary contact blocks
LA2KT
On contactor
LA2 KT
38
1.50
34
1.34
34
1.34
57
2.24
inches
mm
Dimensions
73
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ K-line Mini-Contactors and Starters
Dimensions and Mounting of Low-consumption Reversing Contactors
Reversing contactors LP5K
On panel
On mounting rail AM1DP200 or AM1DE200 1.4 in. (35 mm) DIN rail
LA1K
4 mm (#6) screws
57
90
2.24
3.54
31
57
=
80
=
1.22
2.24
3.15
90
3.54
On one asymmetrical rail DZ5MB with 2 clip-on mounting plates LA9D973 or on 2 mounting plates DX1AP25.
2 x LA9D973
2 x DX1AP25
45
1.78
DZ5 ME5
=
35
=
57
21
1.38
2.24
0.83
90
3.54
57
27
90
2.24
1.06
3.54
On printed circuit board for reversing contactors or 2 contactors mounted side by side
8.65
0.34
= = =
= = =
8.65
0.34
A1
A2
A1
A2
20xØ1.3
45
1.78
45
1.78
Electronic time-delay auxiliary contact blocks
LA2KT
On reversing contactors
LA2 KT
38
34
1.50
1.34
inches
mm
34
1.34
57
2.24
Dimensions
74
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ K-line Mini-Contactors and Starters
Type LP•K Schematics
Type LP\bK Schematics
Type LP•K Three-Pole Low-Consumption Contactors, Reversing Contactors, and Accessories
3-pole contactors
LP4K
Integrated-coil suppression device
LP4K
3-pole + N.O.
3-pole + N.C.
3-pole reversing contactors
LP5K
Dashed lines indicate suggested customer wiring to
electrically interlock coils
Integrated-coil suppression device
LC5K
With screw clamp terminals
3-pole + N.O.
3-pole + N.C.
With Slip-on connectors or solder pins for printed circuit boards
3-pole + N.O.
3-pole + N.O.
Instantaneous auxiliary contact blocks
LA1K
For 3-pole contactors
Terminal referencing conforming to standard EN 50012
2 N.O.
LA1KN20
LA1KN207
2 N.C.
LA1KN02
LA1KN027
1 N.O. + 1 N.C.
LA1KN11
LA1KN117
2 N.C.
LA1KN02
1 N.O. + 1 N.C.
LA1KN11M
Electronic Time-delay Auxiliary Contact Blocks
LA2KT
For 3-pole contactors LP•K
1 C/O
75
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ K-line Mini-Contactors and Starters
Type LP•K Schematics
Type LP•K Four-Pole Low-Consumption Contactors, Reversing Contactors, and Accessories
4-pole contactors
LP4K
Integrated-coil suppression device
LP4K
4-pole + N.O.
2-pole N.O. + 2-pole N.C.
4-pole reversing contactors
LP5K
Integrated-coil suppression device
LP5K
With screw clamp terminals
With slip-on terminals or solder pins for printed circuits boards
Instantaneous auxiliary contact blocks
LA1K
2 N.O.
LA1KN20
LA1KN207
2 N.C.
LA1KN02
LA1KN027
1 N.O. + 1 N.C.
LA1KN11
LA1KN117
Terminal referencing conforming to standard EN 50012
1 N.O. + 1 N.C.
LA1KN11P
Electronic Time-delay Auxiliary Contact Blocks
LA2KT
For 3-pole contactors LP•K
1 C/O
76
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ D-Line
Contactors, Enclosed Starters,
Overload Relays, and Accessories
Catalog
File 8502
D-Line
04
CONTENTS
Description
Page
General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Contactors
Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Selection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Auxiliary Contacts, Timers, and Accessories Characteristics. . . . . . . . . . . . . . . . . 100
Auxiliary Contacts, Timers, and Accessories Selection . . . . . . . . . . . . . . . . . . . . . 106
D-line Voltage Code Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Replacement Coils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Dimensions and Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Schematics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
Overload Relays
Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Selection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Dimensions, Mounting, and Schematics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
Plate-mounted Starters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
Wye-delta Starters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
Enclosed Contactors and Starters
Horsepower Rated Devices for North American Applications. . . . . . . . . . . . . . . . . 151
Kilowatt Rated Devices for International Applications. . . . . . . . . . . . . . . . . . . . . . . 159
Cross Reference List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175
78
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ D-Line Contactors and Starters
General Information
General Information
The D-line contactors and overload relays are the largest selling line of contactors and starters in the
world. They offer high reliability with long mechanical and electrical life and the most complete line of
accessories in the industry.
Contactor Ratings
•
D-line contactors and overload relays are available in 11 contactor ratings for the USA market for
inductive motor applications up to 150 full-load amps and resistive loads up to 200 A. They offer
motor control and overload protection for motors rated up to 100 hp at 480 Vac or 125 hp at 600 Vac.
•
•
•
3-pole and 4-pole contactor versions available.
All contactors include built-in auxiliary contacts.
All screw connections have IP20 rated touch-safe terminals with both North American and
International terminal markings.
•
D-line contactors can be panel mounted with screws or DIN rail mounted.
Easily Installed Accessories
•
•
•
•
•
•
Auxiliary contact blocks with serrated wiping action
Front mount dust tight auxiliary contact blocks
Pneumatic time delay blocks
Transient voltage surge suppressors
Interface modules and electronic timers
Mechanical latching blocks
Control Circuit Flexibility
The D-line contactors are available with ac or dc operating coils. Several devices utilize a low-
consumption dc coil with built-in transient suppression for operation with a low-level dc signal from a
computer or PLC without need for an interposing relay.
Overload Relays
Class 10 or Class 20 bimetallic overload relays are available up to 140 A. They are bimetallic ambient
compensated and are available with or without single-phase sensitivity for phase unbalance and phase
loss protection. New solid state overload relays are available for 90 to 150 A applications. Both bimetallic
and solid-state overload relays include the following features:
•
•
•
•
Isolated N.C. trip contact and N.O. alarm contacts.
Manual or Automatic reset function (bi-metallic versions only).
Tamper-resistant window for FLA settings.
Test trip button.
79
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ D-Line Contactors and Starters
Characteristics of Type LC•D and LP•D Contactors
Characteristics of Type LC\bD and LP\bD Contactors
Environment
LC1D09
LC1D12
LC1DT25
690
LC1D18
LC1DT32
690
LC1D25
LC1DT40
690
Type
LC1DT20
UL/CSA
V
690
To IEC 60947-4-1, overvoltage
category III, degree of pollution: 3
Rated insulation voltage (Vi)
V
1000
600
6
1000
600
6
1000
600
6
1000
600
6
Conforming to UL, CSA
Conforming to IEC 60947
V
Rated impulse withstand voltage
(Vimp)
kV
IEC 60947-1, 60947-4-1, NFC 63-110, VDE 0660, BS 5424, JEM 1038., EN 60947-1,
EN 60947-4-1.
Meets the essential requirements of the
LV & EMC directives
Conforming to standards
Approvals
ASE, UL, CSA, DEMKO, NEMKO, SEMKO, FI, Conforming to SNCF, Sichere Trennung
recommendations
E164862
LR43364
CCN NLDX
Class 3211 04
Power connections
Protection against direct finger contact IP 2X
Protection against direct finger contact IP 2X
“TH”
Degree of protection f
Conforming to VDE 0106
Coil connections
Protective treatment
Conforming to IEC 60068
Storage
- 60 to + 80 °C (-76 to +176 °F)
- 5 to + 60 °C (+23 to +140 °F)
- 40 to + 70 °C (-40 to +158 °F)
3000m (8900 ft.)
Ambient air temperature around
the device
Operation at 80 to 110% nominal control voltage
Permissible at nominal control voltage
Without derating
Maximum operating altitude
Operating positions
Without derating
± 30° possible, in relation to normal vertical mounting plane
Conforming to UL 94
V 1
V1
V1
V1
Flame resistance
Conforming to IEC 60695-2-1
Contactor open
960°
10 g
15 g
2 g
960°
10 g
15 g
2 g
960°
10 g
15 g
2 g
960°
8 g
Shock resistance q
1/2 sine wave = 11ms
Contactor closed
15 g
2 g
Contactor open
Vibration resistance q
5 to 300 Hz
Contactor closed
4 g
4 g
4 g
4 g
Pole characteristics
Number of poles
3
3 or 4
12
3
3 or 4
25
In ac-3, θ ≤ 55°C (131°F)
In ac-1, θ ≤ 40°C (104°F)
Up to
A
9
18
Rated operational current (Ie)
A
25
25
32
40
Rated operational voltage (Ve)
Frequency limits
V
690
25 to 400
25
690
25 to 400
25
690
25 to 400
32
690
25 to 400
40
Of the operational current
θ ≤ 40°C (104°F)
Hz
A
Rated thermal current (Ith)
Rated making capacity (1 rms)
Conforming to IEC 60947-4
220-380-415-440 V
A
250
250
175
85
250
250
175
85
300
300
250
120
240
145
84
450
450
400
180
380
240
120
50
Rated breaking capacity (1 rms) Conforming to IEC 60947 500 V
A
690 V
For 1 s
A
A
A
A
210
105
61
210
105
61
Permissible short time rating
from cold state, no current
flowing
for previous 15 minutes,
For 10 s
For 1 min
at θ ≤ 40 °C (104 °F)
For 10 min
30
30
40
By circuit breaker
Short-circuit protection
Select circuit breaker in accordance with NEC and local codes
Maximum 400% of motor full load Amps
By fuses
Average impedance per pole
A Ith and 50 Hz
AC-3
mΩ
W
2.5
2.5
2.5
0.8
2.5
2
0.20
1.56
0.36
1.56
1.25
3.2
Power dissipation per pole for the
above operational currents
AC-1
W
f
q
Protection provided for the cable c.s.a. indicated on page 86 and for cable connections.
In the least favorable direction, without change of contact state (coil supplied at Ve).
80
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ D-Line Contactors and Starters
Characteristics of Type LC•D and LP•D Contactors
Environment
Type
LC1D32
LC1D38 LC1D40 LC1D50 LC1D65 LC1D80 LC1D95 LC1D115 LC1D150
LP1D40 LP1D50 LP1D65 LP1D80
UL/CSA
V
690
1000
600
6
690
1000
600
6
690
1000
600
8
690
1000
600
8
690
1000
600
8
690
1000
600
8
690
1000
600
8
690
1000
600
8
690
1000
600
8
To IEC 60947-4-1, overvoltage
category III, degree of pollution: 3
Rated insulation voltage (Vi)
V
Conforming to UL, CSA
Conforming to IEC 60947
V
Rated impulse withstand
voltage (Vimp)
kV
Meets the essential
requirements of the LV &
EMC directives
IEC 60947-1, 60947-4-1, NFC 63-110, VDE 0660, BS 5424, JEM 1038., EN 60947-1, EN 60947-4-1.
Conforming to standards
ASE, UL, CSA, DEMKO,
E164862
CCN
NLDX
LR43364
Class
3211 04
UL 508, CSA C22.2 No.14
NEMKO, SEMKO, FI,
Approvals
Conforming to SNCF,
Sichere Trennung
recommendations
-
Power connections
Coil connections
Protection against direct finger contact IP 2X
Protection against direct finger contact IP 2X except LP1D40 to LP1D80
“TH”
Conforming to
VDE 0106
Degree of protection f
Protective treatment
Conforming to IEC 60068
Storage
- 60 to + 80 °C (-76 to +176 °F)
Ambient air temperature
around the device
Operation at 80 to 110% nominal
control voltage
- 5 to + 55 °C (+23 to +131 °F)
Permissible at nominal control voltage
Without derating
- 40 to + 70 °C (-40 to +158 °F)
Maximum operating altitude
Operating positions
3000m (8900 ft.)
Without derating
± 30° possible, in relation to normal vertical mounting plane
Conforming to UL 94
Conforming to IEC 60695-2-1
Contactor open
V 1
960°
8 g
V 1
960°
8 g
V 1
960°
8 g
V 1
960°
8 g
V 1
960°
8 g
V 1
960°
8 g
V 1
960°
8 g
V 1
960°
6 g
V 1
960°
6 g
Flame resistance
Shock resistance q
1/2 sine wave = 11ms
Contactor closed
15 g
2 g
10 g
2 g
10 g
2 g
10 g
2 g
10 g
2 g
10 g
2 g
10 g
2 g
15 g
2 g
15 g
2 g
Contactor open
Vibration resistance q
5 to 300 Hz
Contactor closed
4 g
4 g
3 g
3 g
3 g
3 g
3 g
4 g
4 g
Pole characteristics
Number of poles
3
3
3 or 4
40
3
3 or 4
65
3 or 4
80
3
3 or 4
115
3
In ac-3, θ ≤ 55°C (131°F)
In ac-1, θ ≤ 40°C (104°F)
A
32
38
50
690
50
95
150
200
1000
Rated operational current (Ie)
A
50
60
80
80
125
125
1000
200
Rated operational voltage (Ve) Up to
V
690
25 to 400
50
1000
1000
1000
1000
1000
Frequency limits
Of the operational current
θ ≤ 40°C (104°F)
Hz
A
25 to 400 25 to 400 25 to 400 25 to 400 25 to 400 25 to 400 25 to 400 25 to 400
Rated thermal current (Ith)
50
–
60
80
80
125
125
–
200
–
200
–
Rated making capacity (1 rms) Conforming to IEC 60947-4
220-380-415-440 V
A
550
550
450
180
430
260
138
60
800
800
800
400
720
320
165
72
900
900
900
400
810
400
208
84
1000
1000
1000
630
900
520
260
110
1100
1100
1100
640
–
–
–
–
Conforming to
IEC 60947
Rated breaking capacity (1 rms)
500 V
690 V
A
–
–
–
–
–
–
–
–
For 1 s
A
A
A
A
430
310
150
60
990
1100
800
400
135
1100
950
550
250
1400
1200
580
250
Permissible short time rating
from cold state, no current
flowing
for previous 15 minutes,
at θ ≤ 40 °C (104 °F)
For 10 s
640
For 1 min
For 10 min
By circuit breaker
By fuses
320
135
Select circuit breaker in accordance with NEC and local codes
Maximum 400% of motor full load Amps
Short-circuit protection
Average impedance per pole
A Ith and 50 Hz
AC-3
mΩ
W
2
2
5
2
2
5
1.5
2.4
5.4
1.5
3.7
9.6
1
0.8
0.8
0.6
7.9
24
0.6
13.5
24
4.2
6.4
5.1
7.2
Power dissipation per pole for
the above operational currents
AC-1
W
12.5
12.5
f
q
Protection provided for the cable c.s.a. indicated on page 86 and for cable connections.
In the least favorable direction, without change of contact state (coil supplied at Ve).
81
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ D-Line Contactors and Starters
Characteristics of Type LC•D and LP•D Contactors
Control Circuit Characteristics
LC1D09
LC1D12
LC1D18
LC1D25
LC1D32
LC1D38
Type
LC1DT20
21 to 660
LC1DT25
LC1DT32
LC1DT40
Rated control circuit voltage (Vc)
50 or 60 Hz
Operational
Drop-out
V
21 to 660
0.8 to 1.1 Vac
0.3 to 0.6 Vac
0.8 to 1.1 Vac
0.3 to 0.6 Vac
50 or 60 Hz coils
50/60 Hz coils
Control voltage limits
(θ ≤ 55 °C [131 °F])
Operational
Drop-out
0.85 to 1.1 Vac at 60 Hz
0.3 to 0.6 Vac
0.85 to 1.1 Vac at 60 Hz
0.3 to 0.6 Vac
50 Hz coil
VA
–
–
–
–
–
–
Inrush
Sealed
Inrush
Sealed
Cos ϕ
0.75
70
0.75
70
0.75
70
0.75
0.75
70
0.75
70
50/60 Hz coil VA
70
50 Hz ac
50 Hz coil
VA
–
–
–
–
–
–
Cos ϕ
0.3
7
0.3
7
0.3
7
0.3
0.3
7
0.3
7
50/60 Hz coil VA
7
Average consumption
at 20 °C (68 °F) and at Vc
60 Hz coil
VA
–
–
–
–
–
–
Cos ϕ
0.75
70
0.75
70
0.75
70
0.75
100
0.75
70
0.75
70
50/60 Hz coil VA
60 Hz ac
60 Hz coil
VA
–
–
–
–
–
–
Cos ϕ
0.3
7.5
2 to 3
12 to 22
4 to 19
–
0.3
7.5
2 to 3
12 to 22
4 to 19
–
0.3
7.5
2 to 3
12 to 22
4 to 19
–
0.3
0.3
7.5
2 to 3
12 to 22
4 to 19
–
0.3
7.5
2 to 3
12 to 22
4 to 19
–
50/60 Hz coil VA
7.5
Heat dissipation
Operating time
50/60 Hz
W
2.5 to 3.5
15 to 24
5 to 19
–
Closing “C” c
Opening “O” q
50 or 60 Hz coil
ms
ms
Mechanical durability in millions of
operating cycles
50/60 Hz coil at 50 Hz
15
15
15
15
15
15
Maximum operating rate at ambient
temperature ≤ 55 °C (131 °F)
In operating cycles per hour
3600
3600
3600
3600
3600
3600
c
q
The closing time “C” is measured from the moment the coil supply is switched on to initial contact of the main poles.
The opening time “O” is measured from the moment the coil supply is switched off to the moment the mains poles separate.
82
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ D-Line Contactors and Starters
Characteristics of Type LC•D and LP•D Contactors
Control Circuit Characteristics
Type
LC1D40
LC1D50
LC1D65
LC1D80
LC1D95
LC1D115 LC1D150
Rated control circuit voltage (Vc)
50 or 60 Hz
Operational
Drop-out
V
24 to 660
24 to 500
0.85 to 1.1 Vac
–
50 or 60 Hz coils
0.3 to 0.6 Vac
0.3 to 0.5 Vc –
Control voltage limits
(θ ≤ 55 °C [131 °F])
Operational
Drop-out
0.85 to 1.1 Vac at 60 Hz
0.3 to 0.6 Vac
0.8 to 1.15 Vac at 50/60 Hz
0.3 to 0.5 Vac
50/60 Hz coils
50 Hz coil
VA
200
0.75
245
20
200
0.75
245
20
200
0.75
245
20
200
0.75
245
20
200
0.75
245
20
300
–
Inrush
Sealed
Inrush
Sealed
Cos ϕ
0.8
0.9
50/60 Hz coil VA
280-350
22
280-350
50 Hz ac
50 Hz coil
VA
–
Cos ϕ
0.3
0.3
0.3
0.3
0.3
0.3
0.9
50/60 Hz coil VA
26
26
26
26
26
2 to 18
300
2 to 18
Average consumption
at 20 °C (68 °F) and at Vc
60 Hz coil
VA
220
0.75
245
22
220
0.75
245
22
220
0.75
245
22
220
0.75
245
22
220
0.75
245
22
–
Cos ϕ
0.8
0.9
50/60 Hz coil VA
280-350
22
280-350
60 Hz ac
60 Hz coil
VA
–
Cos ϕ
0.3
0.3
0.3
0.3
0.3
0.3
0.9
50/60 Hz coil VA
26
26
26
26
26
6
6
Heat dissipation
Operating time
50/60 Hz
W
6 to 10
20 to 26
8 to 12
16
6 to 10
20 to 26
8 to 12
16
6 to 10
20 to 26
8 to 12
16
6 to 10
20 to 35
6 to 20
10
6 to 10
20 to 35
6 to 20
10
2 to 18
20 to 50
6 to 20
8
2 to 18
20 to 35
40 to 75
–
Closing “C” c
Opening “O” q
50 or 60 Hz coil
ms
ms
Mechanical durability in millions of
operating cycles
50/60 Hz coil at 50 Hz
6
6
6
4
4
8
8
Maximum operating rate at ambient
temperature ≤ 55 °C (131 °F)
In operating cycles per hour
3600
3600
3600
3600
3600
2400
1200
c
q
The closing time “C” is measured from the moment the coil supply is switched on to initial contact of the main poles.
The opening time “O” is measured from the moment the coil supply is switched off to the moment the mains poles separate.
83
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ D-Line Contactors and Starters
Characteristics of Type LC•D and LP•D Contactors
DC Control Circuit Characteristics
LC1
Type of contactor
D09 to D38
DT20 to DT40
LP1
D12 and D25
LC1 or LP1
D40 to D65
LC1 or
LP1D80
LC1D115 &
LC1D150
Rated control circuit voltage (Uc)
Rated insulation voltage
dc
V
V
V
12 to 440
690
12 to 440
24 to 440
Conforming to IEC 60947-1
Conforming to UL, CSA
600
0.7 to 1.25 Uc
at 60 °C (140 °F) @ 55 °C (131 °F) at 55 °C (131 °F)
0.8 to 1.1 Uc
0.85 to 1.1 Uc
0.75 to 1.2 Uc
at 55 °C (131 °F)
Standard coil
Operational
0.7 to 1.25 Uc
@ 55 °C (131 °F) at 55 °C (131 °F)
0.75 to 1.2 Uc
Control voltage limits
Wide range coil
–
–
0.1 to 0.25 Uc
at 60 °C (140 °F)
0.15 to 0.4 Uc
at 55 °C (131 °F)
Drop-out
dc
0.1 to 0.3 Uc at 55 °C (131 °F)
Inrush
Sealed
“C”
W
5.4
5.4
55
9/11
22
22
270 to 365
2.4 to 5.1
20 to 35
Average consumption at 20 °C (68 ° F)
and at Uc
W
9/11
22
22
Closing
ms
ms
52 - 64
8 - 14
85 to 110
20 to 35
95 to 130
20 to 35
Opening
“O”
20
40 to 75
Average operating time at Uc (1)
Note: The arcing time depends on the circuit switched by the poles. For normal three-phase applications, the arcing time is usually less than 10 ms.
The load is isolated from the supply after a time equal to the sum of the opening time and the arcing time.
Time constant (L/R)
Mechanical life at Uc
ms
28
30
42
30
65
20
75
20
25
8
In millions of operating cycles
In operating cycles per hour
Maximum operating rate
at ambient temperature ≤ 60 °C (140 °F)
3600
3600
3600
3600
1200
Low Consumption Control Circuit Characteristics
Conforming to IEC 60947-1
Rated insulation voltage
V
V
690
Conforming to UL, CSA
600
Maximum voltage
Of the control circuit on dc
250
Inrush
W
2.4
Average consumption dc
at 20 °C and at Uc
Wide range coil
(0.7 to 1.25 Uc)
Sealed
“C”
W
2.4
Closing
ms
ms
70
Operating time (1) at Uc and
at 20 °C (68 ° F)
Opening
Operational
Drop-out
“O”
25
0.7 to 1.25 Uc
Voltage limits θ ≤ 60 °C (140 °F)
of the control circuit
0.1 to 0.3 Uc
Time constant (L/R)
Mechanical life
ms
40
In millions of operating cycles
At ambient temperature ≤ 60 °C (140 °F)
Conforming to UL, CSA
30
Maximum operating rate
ops/h
3600
600
690
V
V
Rated insulation voltage
Conforming to IEC 60947-1
(1) Operating times depend on the type of contactor electromagnet and its control mode.
The closing time “C” is measured from the moment the coil supply is switched on to initial contact of the main poles. The opening time “O” is measured from the moment the coil supply is
switched off to the moment the main poles separate.
84
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ D-Line Contactors and Starters
Characteristics of Type LC•D and LP•D Contactors
Contactor Integral Auxiliary Contact Characteristics
Linked contacts conforming to draft
standard IEC 60947-4-5
Each contactor has two N.O. and N.C. contacts mechanically linked on the same movable contact holder.
Mirror contact
The N.C. contact on each contactor represents the state of the power contacts and can be connected to a PREVENTA safety module
Rated operational voltage (Ue)
Rated insulation voltage (Ui)
Up to
V
690
Conforming to IEC 60947-1
Conforming to UL, CSA
For ambient temperature ≤ 60 °C (140 °F)
V
690
V
600
Conventional thermal current (Ith)
Operating current frequency
A
10
Hz
V
25 to 400
U min.
17
Minimum switching capacity
I min.
mA
5
Short-circuit protection k
Conforming to IEC 60947-5-1
Conforming to IEC 60947-5-1, I rms
1 s
gG fuse: 10 A
Rated making capacity
A
ac: 140; dc: 250
A
100
Short-time rating
Permissible for
500 ms
100 ms
A
120
A
140
Insulation resistance
Non-overlap time
MΩ
ms
> 10
Guaranteed between N.C. and N.O. contacts
1.5 on energizing and on de-energizing
k
Select short circuit protection to meet the National Electrocal Code or other local codes and standards.
ac supply categories AC-14 and AC-15
dc supply category DC-13
Electrical life (valid for up to 1200 operating cycles/hour)
on an inductive load such as the coil of an electromagnet,
without economy resistor, the time constant increasing
Electrical life (valid for up to 3600 operating cycles/hour)
on an inductive load such as the coil of an electromagnet:
making power (cos ϕ 0.7) = 10 times the power broken
(cos ϕ 0.4).
Contact operating power
conforming to IEC 60947-5-1
with the load.
V
24
60
16
4
48
120
32
8
115
280
80
230
560
160
40
400
960
280
70
440
1050
300
80
600
1440
420
100
V
24
96
48
14
48
76
38
12
125
76
250
76
32
–
440
44
–
1 million operating cycles
3 million operating cycles
10 million operating cycles
VA
VA
VA
W
W
W
38
20
12
–
AC-15
DC-13
1
1
8
7
6
8
7
6
24 V
48 V
5
5
4
4
125 V
3
2
3
2
250 V
1
1
440 V
0.8
0.7
0.6
0.8
0.7
0.6
0.5
0.4
0.3
0.5
0.4
0.3
0.2
0.2
0.1
0.1
0.1
0.2
0.3 0.4
0.6 0.8
1
2
3
4
6
8
10
0.1
0.2
0.3 0.4
0.6 0.8
1
2
3
4
6
8
10
0.5 0.7 0.9
5
7
9
0.5 0.7 0.9
5
7
9
Current broken in A
Current broken in A
85
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ D-Line Contactors and Starters
Characteristics of Type LC•D and LP•D Contactors
Power Circuit Connections
LC1
D09, D12
DT20, DT25
LC1D18
LC1DT32 LC1DT40
LC1D25
LC1D40
LP1D40
LC1D50
LP1D50
Type
LC1D32
LC1D38
Connector type
1 conductor
2 conductors
1 conductor
2 conductors
1 conductor
2 conductors
1 conductor
2 conductors
1 conductor
2 conductors
1 conductor
2 conductors
Screw clamp terminals
Box lug terminals
10-3
AWG 18-10
18-8
18-8
1.5/6
1.5/6
18-3
18-10
1/6
18-8
18-8
1.5/10
1.5/6
18-3
18-10
1/6
14-6
14-6
2.5/10
2.5/10
18-3/0
14-2
1/10
–
10-3
AWG 18-10
mm2 1/4
mm2 1/4
AWG 18-10
AWG 18-10
mm2 1/4
mm2 1/2.5
AWG 18-8
AWG 18-8
mm2 1/4
mm2 1/4
N° 2
–
10-4
10-4
Stranded cable
without cable end
2.5/10
2.5/10
–
2.5/25
2.5/16
10-4
2.5/25
2.5/16
10-4
–
12-2
12-2
Stranded cable
with cable end
1/10
1.5/6
–
2.5/25
2.5/10
10-3
2.5/25
2.5/10
10-3
Cabling
1/4
1/4
1.5/6
14-8
10-8
1.5/10
2.5/10
N° 2
Ø 6
18-8
18-8
1.5/6
1.5/6
N° 2
Ø 6
18-8
18-8
1.5/6
1.5/6
N° 2
Ø 6
(for screw clamp terminals)
–
10-6
10-6
Solid cable
without cable end
1.5/10
2.5/10
N° 2
Ø 6
–
2.5/25
2.5/16
–
2.5/25
2.5/16
–
Phillips head type
Screwdriver Ø
Ø 6
Ø 6 to Ø 8
4 mm
Ø 6 to Ø 8
4 mm
Hexagon spanner
–
–
–
–
15 lb.-in.
1.7 N•m
15 lb.-in.
1.7 N•m
23 lb.-in.
2.5 N•m
23 lb.-in.
2.5 N•m
23 lb.-in.
2.5 N•m
45 lb.-in.
5 N•m
45 lb.-in.
5 N•m
Tightening torque
Connection by bus bar or ring-tongue terminals
Bar c.s.a.
–
8
–
–
–
–
–
–
Lug external Ø
Screw Ø
mm
8
10
10
10
13
16
mm M3.5
N° 2
M3.5
N° 2
M4
N° 2
M4
N° 2
M4
N° 2
M5
N° 2
M6
N° 3
Bus bar connection
Phillips head type
(for bus bar or
ring-tongue terminals)
3/16 in.
Ø 6 mm
3/16 in.
Ø 6 mm
Screwdriver Ø
Ø 6
Ø 6
Ø 6
Ø 8 mm
Ø 8 mm
Hexagon spanner
Tightening torque
–
–
–
–
–
–
–
15 lb.-in.
1.7 N•m
15 lb.-in.
1.7 N•m
15 lb.-in.
1.7 N•m
20 lb.-in.
7.5 N•m
20 lb.-in.
7.5 N•m
53 lb.-in.
6 N•m
71 lb.-in.
6 N•m
Spring terminals
1 conductor
2 conductors
1 conductor
2 conductors
AWG 14
12
12
4
12
12
4
12
12
4
12
12
4
–
–
–
–
–
–
–
–
Flexible cabling
AWG 14
mm2 2.5
mm2 2.5
Flexible cable without
cable end
(for spring terminals)
4
4
4
4
Control Circuit Connections
LC1
D09, D12
DT20, DT25
LC1D18
LC1DT32
LC1D25
LC1DT40
LC1D40
LP1D40
LC1D50
LP1D50
Type
LC1D32
LC1D38
Connection by cable
Screw clamp terminals
1 conductor
AWG (mm2) 18 - 10 (1/4)
18 - 10 (1/4)
18 - 10 (1/4)
18 - 10 (1/4)
18 - 10 (1/4)
18 - 10 (1/4)
18 - 10 (1/4)
1/4
1/4
1/4
18 - 10 (1/4)
18 - 10 (1/4)
18 - 10 (1/4)
18 - 12 (1/2.5)
18 - 10 (1/4)
18 - 10 (1/4)
N° 2
18 - 10 (1/4)
18 - 10 (1/4)
18 - 10 (1/4)
18 - 12 (1/2.5)
18 - 10 (1/4)
18 - 10 (1/4)
N° 2
18 - 10 (1/4)
18 - 10 (1/4)
18 - 10 (1/4)
18 - 12 (1/2.5)
18 - 10 (1/4)
18 - 10 (1/4)
N° 2
Stranded cable
without cable end
2 conductors AWG (mm2) 18 - 10 (1/4)
1 conductor
AWG (mm2) 18 - 10 (1/4)
Stranded cable
with cable end
Cabling
2 conductors AWG (mm2) 18 - 12 (1/2.5) 18 - 12 (1/2.5) 18 - 12 (1/2.5) 18 - 12 (1/2.5)
1 conductor
AWG (mm2) 18 - 10 (1/4)
18 - 10 (1/4)
18 - 10 (1/4)
N° 2
18 - 10 (1/4)
18 - 10 (1/4)
N° 2
1/4
Solid cable
without cable end
2 conductors AWG (mm2) 18 - 10 (1/4)
1/4
Phillips head type
Screwdriver Ø
N° 2
N° 2
Ø 6
mm
Ø 6
Ø 6
Ø 6
Ø 6
Ø 6
Ø 6
15 lb.-in.
1.7 N•m
15 lb.-in.
1.7 N•m
17 lb.-in.
1.7 N•m
15 lb.-in.
1.7 N•m
15 lb.-in.
1.7 N•m
15 lb.-in.
1.7 N•m
15 lb.-in.
1.7 N•m
Tightening torque
Connection by bus bar or ring-tongue terminals
Lug external Ø
Screw Ø
mm
mm
8
8
8
8
8
8
8
M3.5
N° 2
M3.5
N° 2
M3.5
N° 2
M3.5
N° 2
M3.5
N° 2
M3.5
N° 2
M3.5
N° 2
Phillips head type
3/16 in.
Ø 6
3/16 in.
Ø 6
3/16 in.
Ø 6
3/16 in.
Ø 6
3/16 in.
Ø 6
3/16 in.
Ø 6
3/16 in.
Ø 6
Screwdriver Ø
15 lb.-in.
1.7 N•m
15 lb.-in.
1.7 N•m
15 lb.-in.
1.7 N•m
15 lb.-in.
1.7 N•m
15 lb.-in.
1.7 N•m
15 lb.-in.
1.7 N•m
15 lb.-in.
1.7 N•m
Tightening torque
86
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ D-Line Contactors and Starters
Characteristics of Type LC•D and LP•D Contactors
Power Circuit Connections
LC1D65
LP1D65
LC1D80
LP1D80
Type
LC1D95
LC1D115
LC1D150
Connector type
1 conductor
2 conductors
1 conductor
2 conductors
1 conductor
2 conductors
1 conductor
2 conductors
1 conductor
2 conductors
1 conductor
2 conductors
Box lug terminals
LA9D11560• terminals
AWG 10-3
10-2
10-4
4/50
4/25
10-4
12-2
4/50
4/16
10-3
10-2
4/50
4/25
–
–
8-250 mcm
8-250 mcm
AWG 10-4
mm2 2.5/25
mm2 2.5/16
AWG 10-4
AWG 12-2
mm2 2.5/25
mm2 2.5/10
AWG 10-3
AWG 10-6
mm2 2.5/25
mm2 2.5/16
–
–
8-1+8-250 mcm q
8-1+8-250 mcm q
Stranded cable
without cable end
4/50
10/120
10/120
4/25
10/120+ 10/50 q
10/120+ 10/50 q
–
–
–
–
–
–
Stranded cable
with cable end
4/50
10/120
10/120
Cabling
4/16
10/120+ 10/50 q
10/120+ 10/50 q
–
8-250 mcm
8-250 mcm
(for screw clamp terminals)
–
8-0+ 8-250mcm q
8-0+8-250 mcm q
Solid cable
without cable end
4/50
10/120
10/120
4/25
10/120+ 10/50 q
10/120+ 10/50 q
Phillips head type
Screwdriver Ø
–
–
–
Ø 6 to Ø 8
Ø 6 to Ø 8
4 mm
Ø 6 to Ø 8
4 mm
–
–
Hexagon spanner
4 mm
4 mm
4 mm
45 lb.-in.
5 N•m
100 lb.-in.
11.3 N•m
100 lb.-in.
11.3 N•m
100 lb.-in.
11.3 N•m
100 lb.-in.
11.3 N•m
Tightening torque
Connection by bus bar or ring-tongue terminals
Bar c.s.a.
–
3 x 16
17
3 x 16
17
5 x 25
25
5 x 25
25
Lug external Ø
mm 16
mm M6
Bus bar connection
Screw Ø
M6
M6
M8
M8
Phillips head type
Screwdriver Ø
Hexagon spanner
N° 3
–
–
–
–
(for bus bar or
ring-tongue terminals)
Ø 8 mm
–
Ø 8 mm
10 mm
Ø 8 mm
10 mm
–
–
13 mm
13 mm
71 lb.-in.
6 N•m
71 lb.-in.
8 N•m
71 lb.-in.
8 N•m
124 lb.-in.
14 N•m
124 lb.-in.
14 N•m
Tightening torque
Spring terminals
1 conductor
2 conductors
1 conductor
2 conductors
AWG
AWG
mm2
mm2
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Flexible cabling
Flexible cable without
cable end
(for spring terminals)
q One of each size range.
Control Circuit Connections
LC1D65
LP1D65
LC1D80
LP1D80
Type
LC1D95
LC1D115
LC1D150
Connection by cable
Screw clamp terminals
1 conductor
2 conductors
1 conductor
2 conductors
1 conductor
2 conductors
AWG (mm2)
18 - 10 (1/4)
18 - 10 (1/4)
18 - 10 (1/4)
18 - 12 (1/2.5)
18 - 10 (1/4)
18 - 10 (1/4)
N° 2
18 - 10 (1/4)
18 - 10 (1/4)
18 - 10 (1/4)
18 - 12 (1/2.5)
18 - 10 (1/4)
18 - 10 (1/4)
N° 2
18 - 10 (1/4)
18 - 10 (1/4)
18 - 10 (1/4)
18 - 12 (1/2.5)
18 - 10 (1/4)
18 - 10 (1/4)
N° 2
18 - 12 (1/2.5)
18 - 12 (1/2.5)
18 - 12 (1/2.5)
18 - 12 (1/2.5)
18 - 12 (1/2.5)
18 - 12 (1/2.5)
N° 2
18 - 12 (1/2.5)
18 - 12 (1/2.5)
18 - 12 (1/2.5)
18 - 12 (1/2.5)
18 - 12 (1/2.5)
18 - 12 (1/2.5)
N° 2
Stranded cable
without cable end
AWG (mm2)
AWG (mm2)
AWG (mm2)
AWG (mm2)
AWG (mm2)
Stranded cable
Cabling
with cable end
Solid cable
without cable end
Phillips head type
Screwdriver Ø
mm
Ø 6
Ø 6
Ø 6
Ø 6
Ø 6
15 lb.-in.
1.7 N•m
15 lb.-in.
1.7 N•m
15 lb.-in.
1.7 N•m
15 lb.-in.
1.7 N•m
15 lb.-in.
1.7 N•m
Tightening torque
Connection by bus bar or ring-tongue terminals
Lug external Ø
Screw Ø
mm
mm
8
8
8
8
8
M3.5
N° 2
M3.5
N° 2
M3.5
N° 2
M3.5
N° 2
M3.5
N° 2
Phillips head type
3/16 in.
Ø 6
3/16 in.
Ø 6
3/16 in.
Ø 6
3/16 in.
Ø 6
3/16 in.
Ø 6
Screwdriver Ø
15 lb.-in.
1.7 N•m
15 lb.-in.
1.7 N•m
15 lb.-in.
1.7 N•m
15 lb.-in.
1.7 N•m
15 lb.-in.
1.7 N•m
Tightening torque
87
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ D-Line Contactors and Starters
Selection of Contactors for Motor Control
Selection of Contactors for Motor Control
The tables below show the kilowatt ratings (for international applications) and horsepower ratings (for
North American applications) of contactors for motor control.
AC and DC Control Circuit — 3-pole Contactors with Touch-safe Terminals for Power Cabling (AC-3 category)
Maximum horsepower ratings
Instantaneous
Auxiliary
Contacts
Standard power ratings of 3-phase motors 50/60 Hz in
category AC-3
Maximum
Inductive
Current in
AC-3
Category
600 V
Rated
1-phase 50/60 Hz 3-phase 50/60 Hz
Operating
Current in
AC-3upto
440 V
Catalog
Number
p f
Weight
lb (kg)
115/
230/
200/
220/
460/
575V
220 V 380 V
230 V 400 V
660 V
690 V
415 V 440 V 500 V
1000 V
120 V
240 V
208V 240V 480V 600 V
HP
0.5
1
HP
1
HP
2
HP
2
HP
5
HP
7.5
10
15
20
30
A
kW
2.2
3
kW
4
kW
4
kW
4
kW
5.5
7.5
10
kW
5.5
7.5
10
kW
–
A
N.O.
1
N.C.
1
9
9
LC1D09••
LC1D12••
LC1D18••
LC1D25••
LC1D32••
LC1D38••
LC1D40••
LC1D50••
LC1D65••
LC1D80••
LC1D95••
LC1D115••
LC1D150••
0.71 (0.320)
0.72 (0.325)
0.73 (0.330)
0.82 (0.370)
0.83 (0.375)
0.84 (0.380)
3.11 (1.400)
3.11 (1.400)
3.11 (1.400)
3.53 (1.590)
3.58 (1.610)
5.38 (2.420)
5.42 (2.440)
2
3
3
7.5
10
15
20
12
18
25
32
38
40
50
65
80
95
115
150
5.5
7.5
11
5.5
9
5.5
9
–
12
18
25
32
38
40
50
65
80
95
115
150
1
1
1
3
5
5
4
–
1
1
2
3
7.5
10
7.5
10
5.5
7.5
9
11
15
18.5
22
25
37
45
45
59
80
11
15
18.5
22
30
37
45
45
59
80
15
15
–
1
1
2
5
15
18.5
18.5
22
18.5
18.5
30
–
1
1
Not for North American applications c
18.5
18.5
22
–
1
1
3
5
10
15
20
25
10
15
20
30
30
40
50
60
30
40
50
60
11
15
18.5
22
25
30
40
22
30
37
45
45
75
90
1
1
3
7.5
10
15
30
33
1
1
5
30
37
37
1
1
7.5
37
55
45
1
1
Not for North American applications c
45
55
45
1
1
–
–
f
–
–
30
40
40
50
75
100
125
55
75
80
1
1
100
75
90
100
1
1
For LC1D09 to LC1D38: clip-on mounting on 35 mm DIN rail AM1DP or screw mounting.
For LC1D40 to LC1D95: clip-on mounting on 35 mm DIN rail AM1DE or 75 mm DIN rail AM1DL or screw mounting.
For LC1D115 and LC1D150: clip-on mounting on 2 x 35 mm DIN rails AM1DP or screw mounting.
p
c
Use voltage codes on page 115 “Voltage Code Table” to complete catalog number.
Devices are UL Listed at the same HP ratings as 32 and 80 amp devices, respectively.
LC1D150••
LC1D09••
LC1D65••
88
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ D-Line Contactors and Starters
Selection of Contactors for Motor Control
The tables below show the kilowatt ratings (for international applications) and horsepower ratings (for
North American applications) of contactors for motor control.
LC1D123••
AC and DC Control Circuit — 3-pole Contactors for Spring Terminal Connections (AC-3 category)
Maximum horsepower ratings
Instantaneous
Auxiliary
Contacts
Standard power ratings of 3-phase motors 50/60 Hz in
category AC-3
Maximum
Inductive
Current in
AC-3
Category
600 V
Rated
1-phase 50/60 Hz 3-phase 50/60 Hz
Operating
Current in
AC-3upto
440 V
Catalog
Number
p f
Weight
lb (kg)
115/
230/
200/
220/
460/
575V
220 V 380 V
230 V 400 V
660 V
690 V
415 V 440 V 500 V
1000 V
120 V
240 V
208V 240V 480V 600 V
HP
0.5
1
HP
1
HP
2
HP
2
HP
5
HP
7.5
10
15
20
30
A
kW
2.2
3
kW
4
kW
4
kW
4
kW
5.5
7.5
10
kW
5.5
7.5
10
kW
–
A
N.O.
N.C.
9
9
1
1
1
1
1
1
1
1
1
1
1
1
LC1D093••
LC1D123••
LC1D183••
LC1D253••
LC1D323••
LC1D383••
0.71 (0.320)
0.72 (0.325)
0.73 (0.330)
0.82 (0.370)
0.83 (0.375)
0.84 (0.380)
2
3
3
7.5
10
15
20
12
18
25
32
38
5.5
7.5
11
5.5
9
5.5
9
–
12
18
25
32
38
1
3
5
5
4
–
2
3
7.5
10
7.5
10
5.5
7.5
9
11
15
18.5
11
15
18.5
15
15
–
2
5
15
18.5
18.5
18.5
18.5
–
Not for North American applications c
18.5
–
f
p
c
For LC1D09 to LC1D38: clip-on mounting on 35 mm DIN rail AM1DP or screw mounting.
Use voltage codes on page 115 “Voltage Code Table” to complete catalog number.
Device is UL Listed at the same HP ratings as 32 amp device.
89
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ D-Line Contactors and Starters
Selection of Contactors for Motor Control
The tables below show the kilowatt ratings (for international applications) and horsepower ratings (for
North American applications) of contactors for motor control.
LC1D1506••
AC and DC Control Circuit — 3-pole Contactors for Ring-tongue Terminals or Bus Bar Power Connections
(AC-3 category)
Maximum horsepower ratings
Instantaneous
Auxiliary
Contacts
Standard power ratings of 3-phase motors
50/60 Hz in category AC-3
Maximum
Inductive
Current
in AC-3
Category
600 V
Rated
1-phase 50/60 Hz 3-phase 50/60 Hz
Operating
Current in
AC-3 up to
440 V
Catalog
Number
f p
Weight
lb (kg)
115/
230/
200/
220/
460/
575 V
220V 380V
230 V 400 V
660 V
690 V
415 V 440 V 500 V
1000 V
120 V
240 V
208 V 240 V 480 V 600 V
HP
0.5
1
HP
1
HP
2
HP
2
HP
5
HP
7.5
10
15
20
30
A
kW
2.2
3
kW
4
kW
4
kW
4
kW
5.5
7.5
10
kW
5.5
7.5
10
kW
–
A
N.O.
1
N.C.
1
9
9
LC1D096••
LC1D126••
LC1D186••
LC1D256••
LC1D326••
LC1D386••
LC1D406••
LC1D506••
LC1D656••
LC1D806••
LC1D956••
LC1D1156••
LC1D1506••
0.71 (0.320)
0.72 (0.325)
0.73 (0.330)
0.82 (0.370)
0.83 (0.375)
0.84 (0.380)
2.93 (1.320)
2.93 (1.320)
2.93 (1.320)
3.55 (1.600)
3.55 (1.600)
4.69 (2.110)
4.69 (2.130)
2
3
3
7.5
10
15
20
12
18
25
32
38
40
50
65
80
95
115
150
5.5
7.5
11
5.5
9
5.5
9
–
12
18
25
32
38
40
50
65
80
95
115
150
1
1
1
3
5
5
4
–
1
1
2
3
7.5
10
7.5
10
5.5
7.5
9
11
15
18.5
22
25
37
45
45
59
80
11
15
18.5
22
30
37
45
45
59
80
15
15
–
1
1
2
5
15
18.5
18.5
22
18.5
18.5
30
–
1
1
Not for North American applications c
18.5
18.5
22
–
1
1
3
5
10
15
20
25
10
15
20
30
30
40
50
60
30
40
50
60
11
15
18.5
22
25
30
40
22
30
37
45
45
75
90
1
1
3
7.5
10
15
30
33
1
1
5
30
37
37
1
1
7.5
37
55
45
1
1
Not for North American applications c
45
55
45
1
1
–
–
f
–
–
30
40
40
50
75
100
125
55
75
80
1
1
100
75
90
100
1
1
For LC1D09 to LC1D38: clip-on mounting on 35 mm DIN rail AM1DP or screw mounting.
For LC1D40 to LC1D95: clip-on mounting on 35 mm DIN rail AM1DE or 75 mm DIN rail AM1DL or screw mounting.
For LC1D115 and LC1D150: clip-on mounting on 2 x 35 mm DIN rails AM1DP or screw mounting.
p
c
Use voltage codes on page 115 “Voltage Code Table” to complete catalog number.
Devices are UL Listed at the same HP ratings as 32 and 80 amp devices, respectively.
AC and DC Control Circuit — 3-pole Contactors for Connection with Slip-on Connectors
For contactors LC1D09 and LC1D12 only, replace the last digit in the catalog numbers shown in the
table above (“6”) with a 9. For example, LC1D096•• becomes LC1D099••. These contactors include
slip-on connectors: UL Recognized
E164862 NLDX2, 2 x 6.35 mm (0.25 in.) on the power poles and
1 x 6.35 mm (0.25 in.) on the coil terminals.
90
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ D-Line Contactors and Starters
Selection of Contactors for Resistive Loads (AC-1) and Inductive Loads (AC-3)
Selection of Contactors for Resistive Loads
AC and DC Control Circuit — 3- or 4-Pole Screw Terminal Connections (AC-1 Category)
Number of
Poles
Instantaneous
Auxiliary Contacts
Maximum Current Utilization
Categories
Catalog
Number
f p
Weight lb (kg)
AC-1
AC-3
N.O.
3
4
2
3
4
2
3
4
2
3
4
2
3
3
3
4
2
4
2
3
3
4
4
2
2
3
3
4
4
2
2
3
3
4
N.C.
0
0
2
0
0
2
0
0
2
0
0
2
0
0
0
0
2
0
2
0
0
0
0
2
2
0
0
0
0
2
2
0
0
0
N.O.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
1
1
0
0
0
0
1
1
0
N.C.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
1
1
0
0
0
0
1
1
0
LC1D09••
LC1DT20••
LC1D098••
LC1D12••
0.71 (0.320)
20
9
0.80 (0.365)
0.80 (0.365)
0.75 (0.340)
0.80 (0.365)
0.80 (0.365)
0.79 (0.355)
0.93 (0.425)
0.93 (0.425)
0.82 (0.370)
0.93 (0.425)
0.93 (0.425)
0.83 (0.375)
0.84 (0.380)
3.11 (1.400)
0.93 (0.425)
0.93 (0.425)
0.93 (0.425)
0.93 (0.425)
3.22 (1.450)
3.11 (1.400)
3.20 (1.440)
4.89 (2.220)
3.22 (1.450)
4.89 (2.220)
3.53 (1.590)
3.55 (1.600)
3.91 (1.760)
4.87 (2.210)
4.09 (1.940)
5.84 (2.650)
5.38 (2.420)
5.42 (2.440)
6.35 (2.860)
25
32
12
18
LC1DT25••
LC1D128••
LC1D18••
LC1DT32••
LC1D188••
LC1D25••
LC1DT20••
40
50
25
32
LC1DT40••
LC1D258••
LC1D32••
or q LC1D38•• c
LC1D40••
LC1D40004••
LC1D40008••
LP1D40004••
LP1D40008••
LC1D50••
60
80
40
50
65
or q LC1D65••
LC1D65004••
LP1D65004••
LC1D65008••
LP1D65008••
LC1D80••
80
95
or q LC1D95•• c
LC1D80004••
LP1D80004••
LC1D80008••
LP1D80008••
LC1D115••
125
200
80
115
150
115
or q LC1D150••
LC1D115004••
AC and DC Control Circuit — 3- or 4-Pole Spring Terminal Connections (AC-1 Category)
3
4
2
3
4
2
3
4
2
3
4
2
0
0
2
0
0
2
0
0
2
0
0
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
g
g
g
g
g
g
g
g
g
g
g
g
LC1D093••
LC1DT203••
LC1D0983••
LC1D123••
LC1DT253••
LC1D1283••
LC1D183••
LC1DT323••
LC1D1883••
LC1D253••
LC1DT403••
LC1D2583••
0.710 (0.320)
0.837 (0.380)
0.837 (0.380)
0.710 (0.320)
0.840 (0.380)
0.840 (0.380)
0.730 (0.330)
0.940 (0.425)
0.940 (0.425)
0.820 (0.370)
0.940 (0.425)
0.940 (0.425)
20
25
32
9
12
–
18
–
–
40
25
–
f
For LC1D09 to LC1D38: clip-on mounting on 35 mm DIN rail AM1DP or screw mounting.
For LC1D40 to LC1D95: clip-on mounting on 35 mm DIN rail AM1DE or 75 mm DIN rail AM1DL or screw mounting.
For LC1D115 and LC1D150: clip-on mounting on 2 x 35 mm DIN rails AM1DP or screw mounting.
For LC1D09 to LC1D25: clip-on mounting on 35 mm DIN rail AM1DP or screw mounting.
g
q
p
c
Select between the two shown based upon the number of operating cycles; see the AC-1 graph on page 22 for further information.
Use voltage codes on page 115 “Voltage Code Table” to complete catalog number.
Devices are UL Listed at the same ratings as 32 and 80 amp devices, respectively.
91
08/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ D-Line Contactors and Starters
Resistive Loads (AC-1) and Inductive Loads (AC-3)
Resistive Loads
AC and DC Control Circuit — 3- or 4-pole Contactors
For Ring Terminals or Bus Bar Power Connections (AC-1 category)
Number of
Poles
Instantaneous
Auxiliary Contacts
Maximum Current Utilization
Categories
Catalog
Number
f p
Weight lb (kg)
AC-1
AC-3
N.O.
3
4
2
3
4
2
3
4
2
3
4
2
3
3
3
4
2
4
2
3
4
4
2
2
3
4
4
2
2
3
3
3
4
N.C.
0
0
2
0
0
2
0
0
2
0
0
2
0
0
0
0
2
0
2
0
0
0
2
2
0
0
0
2
2
0
0
0
0
N.O.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
1
0
0
0
0
1
1
1
0
N.C.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
1
0
0
0
0
1
1
1
0
LC1D096••
LC1DT206••
LC1D0986••
LC1D126••
0.71 (0.320)
20
9
0.80 (0.365)
0.80 (0.365)
0.75 (0.340)
0.80 (0.365)
0.80 (0.365)
0.79 (0.355)
0.93 (0.425)
0.93 (0.425)
0.82 (0.370)
0.93 (0.425)
0.93 (0.425)
0.83 (0.375)
0.84 (0.380)
3.11 (1.400)
0.93 (0.425)
0.93 (0.425)
0.93 (0.425)
0.93 (0.425)
3.11 (1.400)
3.20 (1.440)
4.89 (2.220)
3.22 (1.450)
4.89 (2.220)
3.53 (1.590)
3.91 (1.760)
4.87 (2.210)
4.09 (1.940)
5.84 (2.650)
3.55 (1.600)
5.38 (2.420)
5.42 (2.440)
6.35 (2.860)
LC1D150••
25
32
12
18
LC1DT256••
LC1D1286••
LC1D186••
LC1DT326••
LC1D1886••
LC1D256••
40
50
25
32
LC1DT406••
LC1D2586••
LC1D326••
or q LC1D386•• c
LC1D406••
LC1D400046••
LC1D400086••
LP1D40004••
LP1D40008••
LC1D656••
60
80
40
65
80
LC1D800046••
LP1D800046••
LC1D800086••
LP1D800086••
LC1D806••
LC1D800046••
LP1D800046••
LC1D800086••
LP1D800086••
LC1D95•• c
80
125
95
115
150
115
LC1D1156••
200
or q LC1D1506••
LC1D1150046••
f
For LC1D09 to LC1D38: clip-on mounting on 35 mm DIN rail AM1DP or screw mounting.
For LC1D40 to LC1D95: clip-on mounting on 35 mm DIN rail AM1DE or 75 mm DIN rail AM1DL or screw mounting.
For LC1D115 and LC1D150: clip-on mounting on 2 x 35 mm DIN rails AM1DP or screw mounting.
q
p
c
Select between the two shown based upon the number of operating cycles and control voltage; see the AC-1 graph on page 22 for further information.
Use voltage codes on page 115 “Voltage Code Table” to complete catalog number.
Devices are UL Listed at the same ratings as 32 and 80 amp devices, respectively.
AC and DC Control Circuit — Contactors for Connection with Slip-on Connectors (3-pole only)
AC-1 category
For contactors LC1D09 and LC1D12 only, replace the last digit in the catalog numbers shown in the
table above (“6”) with a 9. For example, LC1D096•• becomes LC1D099••. These contactors include
slip-on connectors: UL Recognized
E164862 NLDX2, 2 x 6.35 mm (0.25 in.) on the power poles and
1 x 6.35 mm (0.25 in.) on the coil terminals.
92
© 2001-2004 Schneider Electric All Rights Reserved
08/04
TeSys™ D-Line Contactors and Starters
Selection of Reversing Contactors for Motor Control
Selection of Reversing Contactors for Motor Control
The tables below show the kilowatt ratings (for international applications) and horsepower ratings (for
North American applications) of contactors for motor control.
The contactors are pre-assembled, horizontally-mounted, and have pre-wired power connections.
Order accessories separately. For information on auxiliary contact blocks and modules, see pages 106
to 107.
AC and DC Control Circuit — 3-pole Reversing Contactors with Touch-safe Terminals for Power Cabling (AC-3 category)
Maximum horsepower ratings
Instantaneous
Auxiliary
Contacts
Standard power ratings of 3-phase motors
50/60 Hz in category AC-3
Maximum
Inductive
Current in
AC-3
Category
600 V
Rated
1-phase50/60Hz 3-phase 50/60 Hz
Operating
Current in
AC-3 up to
440 V
Catalog
Number
f p
Weight
lb (kg)
115/
230/
200/
220/
460/
575 V
220 V 380 V
230 V 400 V
660 V
690 V
415 V 440 V 500 V
1000 V
120 V
240 V
208 V 240 V 480 V 600 V
HP
0.5
1
HP
1
HP
2
HP
2
HP
5
HP
7.5
10
15
20
30
A
kW
2.2
3
kW
4
kW
4
kW
4
kW
5.5
7.5
10
kW
5.5
7.5
10
kW
–
A
N.O.
1
N.C.
1
9
9
LC2D09•• q k
LC2D12•• q k
LC2D18•• q k
LC2D25•• q k
LC2D32•• q k
1.55 (0.700)
1.55 (0.700)
1.670 (0.75)
2.44 (1.100)
2.67 (1.200)
2
3
3
7.5
10
15
20
12
18
25
32
38
40
50
65
80
95
115
150
5.5
7.5
11
5.5
9
5.5
9
–
12
18
25
32
38
40
50
65
80
95
115
150
1
1
1
3
5
5
4
–
1
1
2
3
7.5
10
7.5
10
5.5
7.5
9
11
15
18.5
22
25
37
45
45
59
80
11
15
18.5
22
30
37
45
45
59
80
15
15
–
1
1
2
5
15
18.5
18.5
22
18.5
18.5
30
–
1
1
Not for North American applications
18.5
18.5
22
–
1
1
LC2D38•• q k w 2.67 (1.200)
3
5
10
15
20
25
10
15
20
30
30
40
50
60
30
40
50
60
11
15
18.5
22
25
30
40
–
1
1
LC2D40•• q
LC2D50•• q
LC2D65•• q
LC2D80•• q
LC2D95•• q w
LC2D115 c
LC2D150 c
5.33 (2.400)
5.33 (2.400)
5.33 (2.400)
7.11 (3.200)
7.11 (3.200)
14.44 (6.500)
14.44 (6.500)
3
7.5
10
15
30
33
–
1
1
5
30
37
37
–
1
1
7.5
37
55
45
–
1
1
Not for North American applications
45
55
45
–
1
1
–
–
f
–
–
30
40
40
50
75
100
125
55
75
80
75
90
1
1
100
75
90
100
1
1
For LC2D09 to LC2D38: clip-on mounting on 35 mm DIN rail AM1DP or screw mounting.
For LC2D40 to LC2D95: clip-on mounting on 35 mm DIN rail AM1DE or 75 mm DIN rail AM1DL or screw mounting.
For LC2D115 and LC2D150: clip-on mounting on 2 x 35 mm DIN rails AM1DP or screw mounting.
q
Includes mechanical interlock without electrical contacts. Installer to complete wiring for electrically interlocking contactor operating coils by utilizing a N.C. auxiliary contact integrated in the
contactor or optional LADN or LAD8N type auxiliary contact block.
c
p
k
w
Included with electrical contacts integrated in mechanical interlock (type LA9D••02).
Use voltage codes on page 115 “Voltage Code Table” to complete catalog number.
For reversing contactors with electrical interlocking pre-wired at the factory, add suffix V to the catalog number reflected above. Example: LC2D09•• becomes LC2D09••V.
Devices are UL Listed at the same HP ratings as 32 and 80 amp devices, respectively.
93
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ D-Line Contactors and Starters
Selection of Reversing Contactors for Motor Control
The tables below show the kilowatt ratings (for international applications) and horsepower ratings (for
North American applications) of contactors for motor control.
The contactors are pre-assembled, horizontally-mounted, and have pre-wired power connections.
Order accessories separately. For information on auxiliary contact blocks and modules, see pages 106
to 107.
AC and DC Control Circuit — 3-pole Reversing Contactors for Spring Terminal Connections (AC-3 category)
Maximum horsepower ratings
Instantaneous
Auxiliary
Contacts
Standard power ratings of 3-phase motors
50/60 Hz in category AC-3
Maximum
Inductive
Current in
AC-3
Category
600 V
Rated
1-phase 50/60 Hz 3-phase 50/60 Hz
Operating
Current in
AC-3 up to
440 V
Catalog
Number
f p t
Weight
lb (kg)
115/
230/
200/
220/
460/
575 V
220 V 380 V
230 V 400 V
660 V
690 V
415 V 440 V 500 V
1000 V
120 V
240 V
208 V 240 V 480 V 600 V
HP
0.5
1
HP
1
HP
2
HP
2
HP
5
HP
7.5
10
15
20
30
A
kW
2.2
3
kW
4
kW
4
kW
4
kW
5.5
7.5
10
kW
5.5
7.5
10
kW
–
A
N.O.
N.C.
9
9
1
1
1
1
1
1
1
1
1
1
1
1
LC2D093•• q
LC2D123•• q
LC2D183•• q
LC2D253•• q
LC2D323•• q
1.55 (0.700)
1.55 (0.700)
1.670 (0.75)
2.44 (1.100)
2.67 (1.200)
2
3
3
7.5
10
15
20
12
18
25
32
38
5.5
7.5
11
5.5
9
5.5
9
–
12
18
25
32
38
1
3
5
5
4
–
2
3
7.5
10
7.5
10
5.5
7.5
9
11
15
18.5
11
15
18.5
15
15
–
2
5
15
18.5
18.5
18.5
18.5
–
Not for North American applications
18.5
–
LC2D383•• q k 2.67 (1.200)
f
For LC2D09 to LC2D38: clip-on mounting on 35 mm DIN rail AM1DP or screw mounting.
q
Includes mechanical interlock without electrical contacts. Installer to complete wiring for electrically interlocking contactor operating coils by utilizing a N.C. auxiliary contact integrated in the
contactor or optional LADN or LAD8N type auxiliary contact block.
p
t
k
Use voltage codes on page 115 “Voltage Code Table” to complete catalog number.
For reversing contactors with electrical interlocking pre-wired at the factory, add suffix V to the catalog number reflected above. Example: LC2D09•• becomes LC2D09••V.
LC2D38 is UL Listed at the same HP rating as the 32 amp device.
94
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ D-Line Contactors and Starters
Selection of Reversing Contactors for Motor Control
The tables below show the kilowatt ratings (for international applications) and horsepower ratings (for
North American applications) of contactors for motor control.
The contactors have pre-wired power connections. Order accessories separately. For information on
auxiliary contact blocks and modules, see pages 106 to 107.
LC2D186••
AC and DC Control Circuit — 3-pole Reversing Contactors for Ring-tongue Terminals or Bus Bar Power Connections
(AC-3 category)
Maximum horsepower ratings
Instantaneous
Auxiliary
Contacts
Maximum
Inductive
Current in
AC-3
Category
600 V
Rated
Operating
Currentin
AC-3 up
to 440 V
Catalog
Number
f p
Standard power ratings of 3-phase motors
50/60 Hz in category AC-3
Weight
1-phase 50/60 Hz 3-phase 50/60 Hz
115/
120 V
230/
240 V
200/
220/
460/
575 V
220 V 380 V
230 V 400 V
660 V
415 V 440 V 500 V
1000 V
208 V 240 V 480 V 600 V
690 V
kW
5.5
HP
0.5
1
HP
1
HP
2
HP
2
HP
5
HP
7.5
10
15
20
30
A
kW
2.2
3
kW
4
kW
4
kW
4
kW
5.5
7.5
10
kW
–
A
N.O.
1
N.C.
1
lb (kg)
9
9
LC2D096•• q
LC2D126•• q
LC2D186•• q
LC2D256•• q
LC2D326•• q
LC2D386•• q k
1.55 (0.700)
1.55 (0.700)
1.67 (0.750)
2.44 (1.100)
2.67 (1.200)
2.67 (1.200)
2
3
3
7.5
10
15
20
12
18
25
32
38
115
150
5.5
7.5
11
5.5
9
5.5
9
7.5
–
12
18
25
32
38
115
150
1
1
1
3
5
5
4
10
–
1
1
2
3
7.5
10
7.5
10
5.5
7.5
9
11
15
18.5
59
80
11
15
18.5
59
80
15
15
–
1
1
2
5
15
18.5
18.5
75
18.5
18.5
80
–
1
1
Not for North American applications
18.5
55
–
1
1
–
–
f
–
–
30
15
40
15
75
40
100
40
30
40
75
90
1
1
LC2D1156•• c q 13.22 (5.950)
LC2D1506•• c q 13.22 (5.950)
70
90
100
1
1
For LC2D09 to LC2D38: clip-on mounting on 35 mm DIN rail AM1DP or screw mounting.
For LC2D115 and LC2D150: clip-on mounting on 2 x 35 mm DIN rails AM1DP or screw mounting.
q
Includes mechanical interlock without electrical contacts. Installer to complete wiring for electronically interlocking contactor operating coils by utilizing a N.C. auxiliary contact integrated in
the contactor or optional LADN or LAD8N type auxiliary contact block.
c
p
k
Included with electrical contacts integrated in mechanical interlock (type LA9D••02).
Use voltage codes on page 115 “Voltage Code Table” to complete catalog number.
LC2D386 devices are UL Listed at the same HP rating as the 32 amp device.
AC and DC Control Circuit — 3-pole Reversing Contactors for Connection with Slip-on
Connectors
(AC-3 category)
For contactors LC2D09 and LC2D12 only, replace the last digit in the catalog numbers shown in the
table above (“6”) with a 9. For example, LC2D096•• becomes LC2D099••. These contactors include
slip-on connectors: UL Recognized
E164862 NLDX2, 2 x 6.35 mm (0.25 in.) on the power poles and
1 x 6.35 mm (0.25 in.) on the coil terminals.
Power connections are to be made by the customer.
95
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ D-Line Contactors and Starters
Selection of Changeover Contactors for Resistive Loads (AC-1) and Inductive Loads (AC-3)
Selection of Changeover Contactors for Resistive Loads
The contactors have pre-wired power connections. Order accessories separately. For information on
auxiliary contact blocks and modules, see pages 106 to 107.
AC and DC Control Circuit — 4-pole
Changeover Contactors with Touch-safe Terminals for Power Cabling (AC-1 category)
Instantaneous
Auxiliary Contacts
LC2DT20••
Catalog
Maximum Current Utilization Categories
Number
Weight
f p
AC-1
20
AC-3
9
N.O.
1
N.C.
1
lb (kg)
LC2DT20•• q
1.60 (0.730)
1.55 (0.700)
1.86 (0.450)
2.43 (1.100)
5.30 (2.400)
5.30 (2.400)
7.07 (3.200)
7.07 (3.200)
7.07 (3.200)
7.07 (3.200)
16.0 (27.250)
25
12
1
1
LC2DT25•• q
32
18
1
1
LC2DT32•• q
40
25
1
1
LC2DT40•• q
1
1
LC2D40004•• q
LP2D40004•• q
LC2D65004•• q
LP2D80004•• q
LC2D80004•• q
LP2D80004•• q
LC2D115004•• c
60
40
65
1
1
–
–
80
–
–
–
–
125
80
–
–
200
115
–
–
f
For LC2D12 and LC2D25: clip-on mounting on 35 mm DIN rail AM1DP or screw mounting.
For LC2D40 to LC2D95: clip-on mounting on 35 mm DIN rail AM1DE or 75 mm DIN rail AM1DL or screw mounting.
For LC2D115: clip-on mounting on 2 x 35 mm DIN rails AM1DP or screw mounting.
q
Includes mechanical interlock (type LA9••D978) without electrical contacts. Installer to complete wiring for electronically interlocking contactor
operating coils by utilizing a N.C. auxiliary contact integrated in the contactor or optional LA1DN or LA8DN type auxiliary contact block.
Includes mechanical interlock (Type LA9D11502) with pre-wired electrical contacts for interlocking contactor operating coils.
Use voltage codes on page 115 “Voltage Code Table” to complete catalog number.
c
p
96
© 2001-2004 Schneider Electric All Rights Reserved
08/04
TeSys™ D-Line Contactors and Starters
Selection of Changeover Contactors for Resistive Loads (AC-1) and Inductive Loads (AC-3)
AC and DC Control Circuit— 4-pole
Changeover Contactors with Ring-tongue Terminal or Bus Bar Power Connection
(AC-1 category)
Instantaneous
Auxiliary Contacts
Catalog
Number
f p
Maximum Current Utilization Categories
Weight
lb (kg)
AC-1
20
AC-3
9
N.O.
1
N.C.
1
LC2DT206•• q
1.60 (0.730)
1.55 (0.700)
1.86 (0.450)
2.43 (1.100)
5.30 (2.400)
5.30 (2.400)
7.07 (3.200)
7.07 (3.200)
7.07 (3.200)
7.07 (3.200)
16.0 (27.250)
25
12
1
1
LC2DT256•• q
32
18
1
1
LC2DT326•• q
40
25
1
1
LC2DT406•• q
1
1
LC2D400046•• q
LP2D400046•• q
LC2D650046•• q
LP2D800046•• q
LC2D800046•• q
LP2D800046•• q
LC2D1150046•• c
60
40
65
1
1
–
–
80
–
–
–
–
125
80
–
–
200
115
–
–
f
For LC2D12 and LC2D25: clip-on mounting on 35 mm DIN rail AM1DP or screw mounting.
For LC2D40 to LC2D95: clip-on mounting on 35 mm DIN rail AM1DE or 75 mm DIN rail AM1DL or screw mounting.
For LC2D115: clip-on mounting on 2 x 35 mm DIN rails AM1DP or screw mounting.
q
Includes mechanical interlock (Type LA9••D978) without electrical contacts. Installer to complete wiring for electronically interlocking contactor
operating coils by utilizing a N.C. auxiliary contact integrated in the contactor or optional LA1DN or LA8DN type auxiliary contact block.
Includes mechanical interlock (Type LA9D11502) with pre-wired electrical contacts for interlocking contactor operating coils.
Use voltage codes on page 115 “Voltage Code Table” to complete catalog number.
c
p
97
08/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ D-Line Contactors and Starters
Component Parts for Reversing and Two Speed Contactors
Component Parts for Reversing and Two Speed Contactors
For 3-pole Motor Reversing Contactors
Contactors with Screw Clamp Terminals or Connectors
Horizontally Mounted, Assembled by Customer
Set of Power Connections
Mechanical Interlock Kit
Catalog Number
Using 2 Identical Contactors (1)
LA9D4002
Catalog Number
Including mechanical interlock and an electrical interlocking kit for the contactors
Power Connections for LC1D09 to D38
Weight lb (kg)
Weight lb (kg)
Use with screw terminal versions LC1D09 - LC1D38
Line Side (Parallel) Connector
LAD9V5
LAD9V6
0.037 (0.17)
0.037 (0.17)
LAD9R1V (2)
LAD9R1V (2)
–
–
Load Side (Reversing) Connector
Low Voltage Control Circuit
Interlock
LAD9V1 (3)
0.037 (0.17)
LAD9R1V (2)
–
Use with spring terminal versions LC1D093 - LC1D383
When using Quick-Fit LAD34 and LAD33 Power Connectors
LA9D6569
Line Side (Parallel) Connector
Load Side (Reversing) Connector
When using standard cable/wire
Line Side (Parallel) Connector
Load Side (Reversing) Connector
LAD9V10
LAD9V11
0.037 (0.17)
0.037 (0.17)
LAD9V2
LAD9V2
–
–
LAD9V12
LAD9V13
0.037 (0.17)
0.037 (0.17)
LAD9V2
LAD9V2
–
–
Including mechanical interlock with integral electrical interlocking
LC1D40 to D65
LA9D6569
LA9D8069
LA9D8069
LA9D11569
0.290 (0.64)
0.290 (0.64)
0.490 (1.08)
1.450 (3.20)
LA9D4002
LA9D4002
LA9D8002
LA9D11502
0.37 (0.170)
0.37 (0.170)
0.37 (0.170)
0.63 (0.290)
LC1D80 and D95 (ac)
LC1D80 and D95 (dc)
LC1D115 and D150
LA9D8069
Including mechanical interlock without electrical interlocking
Power Connections for LC1D09 to D38
Line Side (Parallel) Connector
Load Side (Reversing) Connector
LC1D40 to D65
LAD9V5
0.045 (0.10)
0.045 (0.10)
0.290 (0.64)
0.490 (1.08)
0.490 (1.08)
LAD9R1 (2)
LAD9R1 (2)
LA9D50978
LA9D50978
LA9D80978
–
LAD9V6
–
LA9D6569
LA9D8069
LA9D8069
0.37 (0.170)
0.37 (0.170)
0.37 (0.170)
LC1D80 and D95 (ac)
LC1D80 and D95 (dc)
For Low Speed – High Speed Starter
Description
For Contactors with Connections
Catalog Number
LA9D9PVGV
Weight lb (kg)
Connection kit enabling reversing
of slow and high speed directions,
using a reversing contactor and a
2 N.O. + 2 N.C. main pole contactor
Screw clamps or connectors
Spring terminals
0.03 (0.016)
LAD3PVPG
0.15 (0.068)
(1) To order the 2 contactors: see pages 88, 89 and 90.
(2) Mechanical interlock kit includes line and load side power connectors, mechanical interlock, control circuit interlock (LAD9R1V only), and clip.
Interlock only -- LAD9V2 (includes retaining clip). Retaining clip only -- W116430980111 (std. package of 10).
(3) There is no spring terminal equivalent for this part.
LAD9R1
(4) Line side (parallel) connector: LAD9V5; load side (reversing) connector: LAD9V6.
Characteristics: pages 80 to 87
Dimensions, Schematics: pages 128, 129
98
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ D-Line Contactors and Starters
Component Parts for Assembling Changeover Contactor Parts for Distribution
Component Parts for Assembling Changeover Contactor Parts for Distribution
For 4-pole Changeover Contactor Pairs (3-phase distribution + neutral)
Contactors with Screw Clamp Terminals or Connectors
Horizontally Mounted, Assembled by Customer
Set of Power Connections
Catalog Number
Mechanical Interlock
Catalog Number of Kit
LA9D4002
Using 2 Identical Contactors (1)
Weight lb (kg)
Weight lb (kg)
Including mechanical interlock and an electrical interlocking kit for the contactors
LC1DT20 to DT40
LADT9R1V (2)
0.088 (0.040)
–
–
Including mechanical interlock with integral electrical interlocking
LC1D65004
LC1D80004
LP1D80004
LC1D115004
LA9D6570
LA9D8070
LA9D8070
LA9D11570
0.33 (0.150)
0.62 (0.280)
0.62 (0.280)
2.43 (1.100)
LA9D4002
LA9D4002
LA9D8002
LA9D11502
0.37 (0.170)
0.37 (0.170)
0.37 (0.170)
0.62 (0.280)
Including mechanical interlock without electrical interlocking
LC1DT20 to DT40
With screw clamp terminals
or connectors
LADT9R1 (2)
(4)
0.08 (0.035)
–
–
–
–
LA9D50978
LC1DT203 to DT403
With spring terminal connections
–
LC1 or LP1D65004
LC1D80004
LA9D6570 (3)
LA9D8070 (3)
LA9D8070 (3)
0.33 (0.150)
0.62 (0.280)
0.62 (0.280)
LA9D50978
LA9D50978
LA9D80978
0.34 (0.155)
0.34 (0.155)
0.40 (0.180)
LP1D80004
For 3-pole changeover contactor pairs
Including mechanical interlock with integral electrical interlocking
LC1D115 and D150
LA9D11571
2.12 (0.960)
LA9D11502
0.62 (0.280)
(1) To order the two contactors: see page 91.
(2) Including mechanical interlock.
(3) Order two contact bocks LADN•1 to obtain electrical interlocking between the contactors, see page 106.
(4) To build a reversing contactor with spring terminal connections, the following components must be ordered in addition to the two contactors:
- 1 mechanical interlock LAD9V2,
- 1 downstream power connection kit LAD9V9
LA9D8070
99
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ D-Line Contactors and Starters
Characteristics of Auxiliary Contacts, Timers, and Accessories
Characteristics of Auxiliary Contact Blocks, Timers, and Accessories
Auxiliary Contact Blocks without Dust and Damp Protected Contacts for Contactors
Environment
Contact block type
LADN or C
LADT and S
LADR
LAD8
Meets the essential requirements
of the LV & EMC directives
Conforming to standards
Product certifications
IEC 60947-5-1, NF C 63-140, VDE 0660, BS 4794, EN 60947-5-1
UL, CSA
Protective treatment
Degree of protection
Conforming to IEC 60068
“TH”
Conforming to VDE 0106
Storage
Protection against direct finger contact IP 2X
- 60 to + 80 (- 140 to + 176 °F)
- 5 to + 60 (- 41to + 140 °F)
- 40 to + 70 (- 104 to + 158 °F)
3000
°C
°C
°C
m
Ambient air temperature around the device Operation
Permissible for operation at Uc
Maximum operating altitude
Cabling
Without derating
Phillips N° 2 and Ø 6 mm
Flexible or solid cable with or without cable end
mm2
mm2
Min.: 1 x 1; max.: 2 x 2.5 (#10 AWG)
Max.: 2 x 2.5 (#10 AWG)
Connection by spring terminals
Flexible or solid cable without cable end
Instantaneous and Time Delay Contact Characteristics
Number of contacts
1, 2 or 4
2
2
2
Rated operational voltage (Ue)
Up to
V
690
Conforming to IEC 60947-5-1
Conforming to UL, CSA
For ambient temperature ≤ 60 °C (140 °F)
V
690
Rated insulation voltage (Ui)
V
600
Conventional thermal current (Ith)
Frequency of operational current
A
10
Hz
V
25 to 400
U min.
17
Minimum switching capacity
I min.
mA
A
5
Short-circuit protection k
Conforming to IEC 60947-5-1 and VDE 0660. gG fuse
Conforming to IEC 60947-5-1, I rms
10
Rated making capacity
A
ac: 140; dc: 250
Permissible for:
1 s
A
100
120
140
> 10
Short-time rating
500 ms
100 ms
A
A
Insulation resistance
Non-overlap time
Overlap time
MΩ
ms
ms
Guaranteed between N.C. and N.O. contacts
Guaranteed between N.C. and N.O. on LADC22
1.5 (on energizing and on de-energizing)
1.5
–
–
–
–
–
- 40 to + 70
(- 104 to + 158 °F) (- 104 to + 158 °F)
- 40 to + 70
Ambient air temperature for operation
°C
Time delay
(LADT, R and S contact blocks)
Accuracy only valid for setting range
indicated on the front face
Repeat accuracy
–
± 2%
± 2%
–
Drift up to 0.5 million operating cycles
Drift depending on ambient air temperature
In millions of operating cycles
–
+ 15%
+ 15%
0.25% per °C
5
–
–
0.25% per °C
5
–
Mechanical durability
30
30
Operational power of contacts
See page 101.
k
Select short circuit protection to meet the National Electrical Code or other local codes and standards.
Catalog Number: pages 107, 108
Dimensions: pages 122, 123
Schematics: pages 126, 127
100
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ D-Line Contactors and Starters
Characteristics of Auxiliary Contacts, Timers, and Accessories
Auxiliary Contact Blocks with Dust and Damp Protected Contacts for Contactors
Operational Power of Contacts (conforming to IEC 60947-5-1)
AC supply, categories AC-14 and AC-15
Electrical durability (valid up to 3600 operating cycles/hour) on an inductive load such as the coil of an electromagnet: making power (cos ϕ 0.7) = 10
times the power broken (cos ϕ 0.4)
V
24
60
16
4
48
120
32
8
115
280
80
230
560
160
40
400
960
280
70
440
1050
300
80
600
1440
420
100
1 million operating cycles
3 million operating cycles
10 million operating cycles
VA
VA
VA
20
1
8
7
6
5
4
3
2
1
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.1
0.2
0.3 0.4
0.6 0.8
1
2
3
4
6
8
10
0.5 0.7 0.9
5
7
9
Current broken in A
DC supply, category DC-13
Electrical durability (valid up to 1200 operating cycles/hour) on an inductive load such as the coil of an electromagnet, without economy resistor, the time
constant increasing with the power.
V
24
48
90
50
18
125
75
250
68
440
61
1 million operating cycles
3 million operating cycles
10 million operating cycles
W
W
W
120
70
38
33
28
25
14
12
10
1
8
7
6
24 V
48 V
5
4
125 V
3
2
250 V
1
440 V
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.1
0.2
0.3 0.4
0.6 0.8
1
2
3
4
6
8
10
0.5 0.7 0.9
5
7
9
Current broken in A
Schematics: pages 126, 127
Catalog Number: pages 107, 108
Dimensions: pages 122, 123
101
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ D-Line Contactors and Starters
Characteristics of Auxiliary Contacts, Timers, and Accessories
Auxiliary Contact Blocks with Dust and Damp Protected Contacts for Contactors
Environment
LA1DZ
Contact block type
LA1DX
LA1DY
protected
non protected
Meets the essential requirements
of the LV & EMC directives
Conforming to standards
Product certifications
IEC 60947-5-1, VDE 0660
UL, CSA
“TH”
Protective treatment
Degree of protection
Ambient air temperature
Conforming to IEC 60068
Conforming to VDE 0106
Storage and operation
Protection against direct finger contact IP 2X
°C
- 25 to + 70 (- 77 to + 158 °F)
Phillips N° 2 and Ø 6 mm
Flexible or solid cable
Cabling
mm2
Min.: 1 x 1
with or without cable end
Max.: 2 x 2.5
Number of contacts
2
2
2
2
Contact Characteristics
Rated operational voltage (Ue)
Up to
V
50
250
–
50
250
–
690
24
250
–
Conforming to IEC 60947-5-1
Conforming to UL, CSA
For ambient temperature ≤ 40 °C (104 °F)
V
690
Rated insulation voltage (Ui)
V
600
Conventional thermal current (Ith)
Maximum operational current (Ie)
Frequency of operational current
Minimum switching capacity
A
–
–
10
–
mA
Hz
V
50
–
50
–
10
50
–
25 to 400
U min.
3
3
17
3
I min.
mA
A
0.3
–
0.3
–
5
0.3
–
Short-circuit protection k
Conforming to IEC 60947-5-1. gG fuse
Conforming to IEC 60947-5-1, I rms
10
Rated making capacity
A
–
–
ac: 140; dc: 250
–
Permissible for:
1 s
A
–
–
100
120
140
> 10
30
–
Short-time rating
500 ms
100 ms
A
–
–
–
A
–
–
–
Insulation resistance
Mechanical durability
MΩ
> 10
5
> 10
5
> 10
5
In millions of operating cycles
Materials and technology
used for dust and damp
protected contacts
Gold - Single
break with
crossed bars
Gold - Single
break with
crossed bars
Gold - Single
break with
crossed bars
–
k
Select short circuit protection to meet the National Electrical Code or other local codes and standards.
Catalog Number: pages 107, 108
Dimensions: pages 122, 123
Schematics: pages 126, 127
102
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ D-Line Contactors and Starters
Characteristics of Auxiliary Contacts, Timers, and Accessories
Interface Modules for Contactors
Environment
Meets the essential requirements
of the LV & EMC directives
Conforming to standards
IEC 60255-5
UL, CSA
Product certifications
Protective treatment
Degree of protection
Conforming to IEC 60068
“TH”
Conforming to VDE 0106
Storage
Protection against direct finger contact IP 2X
- 40 to + 80 (- 104 to + 176 °F)
- 25 to + 55 (- 77 to + 131 °F)
- 25 to + 70 (- 77 to + 158 °F)
°C
°C
°C
Ambient air temperature
around the device
Operation
Permissible for operation at Uc
Other Characteristics
Module type
LA4DFBQ
With relay
5
LA4DFB
LA4DFE
LA4DLB
LA4DLE
LA4DWB
With relay With relay With relay + override
Solid state
Rated insulation voltage
Rated operational voltage
Indication of input state
Conforming to IEC 60947-1
Conforming to IEC 60947-1
V
V
250
250
415
By integral LED which illuminates when the contactor coil is energized
Control voltage (E1-E2)
Permissible variation
V
V
dc 24
dc 24
dc 48
dc 24
dc 48
dc 24
17 to 30
17 to 30
33 to 60
17 to 30
33 to 60
5 to 30
8.5 for 5 V
15 for 24 V
Current consumption at 20 °C (68 °F)
mA
25
25
15
25
15
Input signals
U
V
< 2.4
< 2.4
< 2
< 4.8
< 1.3
33
< 2.4
< 2
< 4.8
< 1.3
33
< 2.4
< 2
5
State “0” guaranteed for
I
mA
V
< 2
State “1” guaranteed for
Against reverse polarity
Of the input
U
17
17
17
By diode
Built-in protection
By diode
Electrical durability at 220/240 V
Maximum immunity time to micro-breaks
Power dissipated
In millions of operating cycles
3
10
4
10
4
3
3
20
ms
W
4
4
4
1
At 20 °C (68 °F)
0.6
0.6
0.6
0.6
0.6
0.4
With coil:
With coil:
ac 24 to 250 V
ac 100 to 250 V
ac 380 to 415 V
–
LC1D40 to D150
–
Direct mounting without contactor
–
–
–
LC1D40 to D115
LC1D40 to D150
–
LC1D09 to D38,
DT20 to DT60
ac 24 to 250 V
ac 380 to 415 V
–
LC1D09 to D38, DT20 to DT60
Mounting with cabling adaptor LAD-4BB
LC1D09 to D38,
DT20 to DT40
–
–
Operating times depend on the type of contactor electromagnet and its control mode.
The closing time “C” is measured from the moment the coil supply is switched on to initial contact of the main poles. The opening time “O” is
measured from the moment the coil supply is switched off to the moment the main poles separate.
Total operating time
at Uc (of the contactor)
LC1D09 to D38, DT20 to DT60
20 to 30
LC1D40 to D65
28 to 34
LC1D80 and D95
28 to 43
N.O. ms
N.C. ms
With LA4DF, DL
16 to 24
20 to 24
18 to 32
Phillips N° 2 and Ø 6 mm
Flexible or solid cable
with or without cable end
mm2
mm2
Min.: 1 x 1 (#12 AWG)
Cabling
Min.: 2 x 2.5 (#12 AWG)
Catalog Number: page 111
Dimensions: pages 122, 123
Schematics: pages 126, 127
103
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ D-Line Contactors and Starters
Characteristics of Auxiliary Contacts, Timers, and Accessories
Electronic Serial Timer Modules for Contactors
Environment
Module type
LA4DT (On-delay)
Meets the essential
requirements of the LV & EMC
directives
Conforming to standards
IEC 60255-5
Product certifications
Protective treatment
Degree of protection
UL, CSA
Conforming to IEC 60068
“TH”
Conforming to VDE 0106
Storage
Protection against direct finger contact IP 2X
- 40 to + 80 (- 104 to + 176 °F)
- 25 to + 55 (- 77 to + 131 °F)
- 25 to + 70 (- 77 to + 158 °F)
250
°C
°C
°C
V
Ambient air temperature
around the device
Operation
For operation at Uc
Conforming to IEC 60947-1
Rated insulation voltage (Ui)
Cabling
Min.: 1 x 1
Phillips N° 2 and Ø 6 mm Flexible or
solid cable with or without cable end
mm2
Max.: 2 x 2.5
Control Circuit Characteristics
Built-in protection
On input
By varistor
Suppression of contactor
By varistor
Rated control circuit voltage (Uc)
Permissible variation
Type of control
V
s
ac or dc 24 to 250
0.8 to 1.1 Uc
By mechanical contact only
Time Delay Characteristics
Timing ranges
0.1 to 2; 1.5 to 30; 25 to 500
Repeat accuracy
0 to 40 °C (104 °F)
± 3% (10 ms minimum)
During the time delay period
After the time delay period
During the time delay period
After the time delay period
By LED
ms
ms
ms
ms
150
Reset time
50
10
Immunity to micro-breaks
Indication of time delay
2
Illuminates during time delay period
Switching Characteristics (solid state type)
Maximum power dissipated
Leakage current
W
2
mA
V
< 5
Residual voltage
3.3
Overvoltage protection
3 kV; 0.5 N•m
Electrical durability
In millions of operating cycles
30
Operating Diagrams
LA4DT “On-delay” electronic timers
1
0
U supply
(A1-A2)
1
0
Time delay output
Contactor coil
t
Red LED
Catalog Number: page 111
Dimensions: pages 122, 123
Schematics: pages 126, 127
104
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ D-Line Contactors and Starters
Characteristics of Auxiliary Contacts, Timers, and Accessories
Control Modules, Coil Suppressor Modules and Mechanical Latch Blocks for Contactors
Environment
Conforming to standards
Product certifications
Protective treatment
Degree of protection
IEC 60947-5-1
UL, CSA
Conforming to IEC 60068
Conforming to VDE 0106
Storage
“TH”
Protection against direct finger contact IP 2X
- 40 to + 80 (- 104 to + 176 °F)
- 25 to + 55 (- 77 to + 131 °F)
- 25 to + 70 (- 77 to + 158 °F)
°C
°C
°C
Ambient air temperature
around the device
Operation
Permissible for operation at Uc
“Auto - Man - Stop” Control Modules
Recommendation
The Auto - Man selector switch must only be operated with the Start - Stop (“O” “I”) switch in position “O”
Rated insulation voltage
Rated operational voltage
Protection
Conforming to IEC 60947-5-1
Conforming to IEC 60947-5-1
Against electric shocks
Contactor coil suppression
By integral LED
V
250
V
250
kV
2
Built-in protection
By varistor
Indication
Illuminates when the contactor coil is energized
20,000
Electrical durability
In operating cycles
Coil Suppressor Modules
LA4DA
LAD4RC
LA4DB
LAD4T
LA4DE
LAD4V
Module type
LA4DC
Bidirectional
peak limiting
diode
Type of protection
RC circuit
Diode
Varistor
ac
24 to 415
ac or dc
24 to 72
dc
12 to 250
ac or dc
24 to 250
Rated control circuit voltage (Uc)
Maximum peak voltage
V
3 Uc
400
200
100
150
2 Uc
–
Uc
–
2 Uc
–
24/48 V
Hz
Hz
Hz
Hz
50/127 V
110/240 V
380/415 V
Natural RC frequency
–
–
–
–
–
–
Mechanical Latch Blocks
Mechanical latch block type
LA6DK10
LAD6K10
LA6DK20
LC1D40 to D65, LC1D09 to D38, LC1D80 to D150
For mounting on contactor
LP1D65
UL, CSA
690
DT20 to DT60
LP1D80 and LC1D115
Certification
UL, CSA
690
Rated insulation voltage
Rated control circuit voltage
Conforming to IEC 60947-5-1
ac 50/60 Hz and dc
V
V
24 to 415
25
24 to 415
25
ac
dc
VA
W
Power required
For unlatching
30
30
Maximum operating rate
On-load factor
In operating cycles/hour
1200
10%
1200
10%
0.5
Mechanical durability at Uc
In millions of operating cycles
Dimensions: pages 122, 123
0.5
Catalog Number: pages 108, 110 - 112
Schematics: pages 126, 127
105
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ D-Line Contactors and Starters
Selection of Auxiliary Contact Blocks
Selection of Auxiliary Contact Blocks
aaa
LA6-DK
or
q
LAD-6K
LAD-N10, N01
(for LC1-D40 through D95 only)
LC1D
LAD-8N
LAD-N
LAD-N
LAD-C
LAD-T
LAD-S2
LAD-R
q
The LA6DK cannot be utilized with LC1D09 through D38 TeSys contactors.
LA1-DX, DY, DZ
106
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ D-Line Contactors and Starters
Selection of Auxiliary Contact Blocks
Instantaneous Auxiliary Contact Blocks for Connection by Screw Clamp Terminals
For use in normal operating environments
Composition
Number of contacts per block (see table below for
maximum number of contacts)
Clip-on mounting
Catalog Number
Weight lb (kg)
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
1
–
1
2
–
2
1
4
–
3
2
1
2
–
–
1
1
–
2
2
3
–
4
1
2
1
–
2
LADN10 f
LADN01 f
LADN11
0.04 (0.020)
0.04 (0.020)
0.07 (0.030)
0.07 (0.030)
0.07 (0.030)
0.11 (0.050)
0.11 (0.050)
0.11 (0.050)
0.11 (0.050)
0.11 (0.050)
0.11 (0.050)
0.07 (0.030)
0.07 (0.030)
0.07 (0.030)
1
2
LADN20
LADN02
Front
LADN22
LADN13
4
LADN40
LADN04
LADN31
4 includes one N.O. and one N.C. make before break
2
LADC22
LAD8N11k
LAD8N20 k
LAD8N02 k
Side
For terminal referencing conforming to standard EN 50012 l
Front, on
3P contactors &
4P contactors 20 to 60A
2
–
–
–
–
–
–
1
2
1
2
LADN11G
LADN22G
0.07 (0.030)
0.11 (0.050)
4
2
4
–
–
–
–
–
–
1
2
1
2
LADN11P
LADN22P
0.07 (0.030)
0.11 (0.050)
Front, on
4P contactors 80 to 200A
With dust and damp protected terminals, for use in particularly harsh industrial environments
2
–
2
–
–
–
2
–
2
2
2
–
–
2
–
–
–
–
–
2
1
LA1DX20
LA1DX02
LA1DY20 q
LA1DZ40
LA1DZ31
0.09 (0.040)
0.09 (0.040)
0.09 (0.040)
0.11 (0.050)
0.13 (0.060)
–
–
–
1
Front
4
f
For LC1D40 through LC1D95 only.
q
k
l
Device with 4 shield bonding terminals.
Mount on left side only of LCkD09 through D38 with AC coils. Not allowed on LCkD09 through D38 with DC coils.
See page 126 for actual markings.
Instantaneous auxiliary contact blocks for connection by ring-tongue connectors
This type of connection is not possible for blocks with dust and damp protected contacts. For all other instantaneous auxiliary contact blocks, add the digit 6 to the end of the references selected
above. Example: LADN10 becomes LADN106.
Instantaneous auxiliary contact blocks for connection by spring terminals
This type of connection is not possible for LAD8, LADN with 1 contact or blocks with dust and damp protected contacts. For all other contact blocks, add the digit 3 to the end of the references selected
above. Example: LADN11 becomes LADN113.
Instantaneous auxiliary contact blocks for connection by Faston connectors
This type of connection is not possible for LAD8, LADN with 1 contact or blocks with dust and damp protected contacts. For all other contact blocks, add the digit
9
to the end of the references selected
above. Example: LADN11 becomes LADN119.
Maximum Number of Auxiliary Contacts
Contactors
Instantaneous auxiliary contact blocks
Time delay
Front
mounted
Front mounted
Side mounted
Type Number of poles and size
1 contact
2 contacts
4 contacts
3P
LC1D09 to D38
1 on left-hand side
1 on each side
1 on each side
1 on left-hand side
1 on left-hand side
1 on each side
1 on each side
–
and
or
–
2
2
–
–
1
1
–
1
–
–
2
–
–
–
1
or 1
or 1
or 1
or 1
or 1
or 1
or 1
or 1
or 1
or 1
or 1
or 1
or 1
–
or 1
or 1
or 1
or 1
or 1
or 1
or 1
or 1
or 1
or 1
or 1
or 1
or 1
–
LC1D40 to D95 (50/60 Hz)
LC1D40 to D95 (50 or 60 Hz)
LC1D115 and D150
LC1DT20 to DT40
LC1D65 and D80
LC1D115
and 1
and 1
1
and
and
and
or
ac
4P
3P
4P
1
or 1
or 1
1
and
LC1D09 to D38
LC1D40 to D95
–
or 1
1
LC1D115 and D150
LC1DT20 to DT40
LP1D65 and D80
LC1D115
1 on left-hand side
1 on left-hand side
–
and
or
dc
1
and 1
and 1
1 (2)
1
1 on each side
–
3P
4P
LC1D09 to D38
LC (1)
LC1DT20 to DT40
1 on left-hand side
and
or 1
or 1
(1) LC: low consumption.
(2) Except LADN02.
In order to mount on an LAD8N on an LC1D40 to D95, a set of shims must be ordered separately, see page 114.
Characteristics: page 100-102
Dimensions: pages 122, 123
Schematics: pages 126, 127
107
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ D-Line Contactors and Starters
Selection of Time-Delay Blocks, and Mechanical-Latch Blocks
Selection of Time-Delay Blocks, and Mechanical-Latch Blocks
Time Delay Auxiliary Contact Blocks for Connection by Screw Clamp Terminals
Maximum number of auxiliary contact blocks that can be attached per contactor, see page 107.
Sealing cover to be ordered separately, see page 114.
LADT0 and LADR0: with extended scale from 0.1 to 0.6 s.
LADS2: with switching time of 40 ms ± 15 ms between opening of the N.C. contact and closing of the N.O. contact.
Time Delay
Clip-on Mounting
Number of Contacts
Catalog Number
Weight lb (kg)
Type
Setting Range
0.1 to 3 s
Front
1 N.O. + 1 N.C.
On-delay f
LADT0
LADT2
LADT4
LADS2
LADR0
LADR2
LADR4
(0.13) 0.060
(0.13) 0.060
(0.13) 0.060
(0.13) 0.060
(0.13) 0.060
(0.13) 0.060
(0.13) 0.060
LADTk
0.1 to 30 s
10 to 180 s
1 to 30 s
Off-delay f
0.1 to 3 s
0.1 to 30 s
10 to 180 s
f
Also fit pre-TeSys Contactors.
Time delay auxiliary contact blocks for connection by ring-tongue connectors
Add the digit 6 to the end of the references selected above. Example: LADT0 becomes LADT06.
Time delay auxiliary contact blocks for connection by spring terminals
Add the digit 3 to the end of the references selected above. Example: LADT0 becomes LADT03.
Time delay auxiliary contact blocks for connection by Faston connectors
Add the digit 9 to the end of the references selected above. Example: LADT0 becomes LADT09.
LA6DKkk
Mechanical latch blocks (2)
Basic Reference.
Clip-on
Mounting Control
Unlatching
For use on Contactor
Complete with Code
Indicating Control Voltage
Standard Voltages (1)
Weight lb (kg)
LC1D40 to D65 3P ac or dc
LC1D65 4P ac
LP1D65 4P dc
Manual or
electric
Front
LA6DK10•
B E F M Q
(0.15) 0.070
LADTk3
LC1D80 to D150 3P ac
LC1D80 and D115 3P dc
LP1D80 and LC1D115 4P c
LA6DK20•
LAD6K10•
B E F M Q
B E F M Q
(0.20) 0.090
(0.15) 0.070
LC1D09 to D38 ac or dc
LC1DT20 to DT60 ac or dc
(1) Standard control circuit voltages (for other voltages please consult your Regional Sales Office).
Vdc 50/60 Hz,
Code
24
B
32/36
C
42/48
E
60/72
EN
100
K
110/127
F
220/240
256/277
U
380/415
M
Q
(2) The mechanical latching block must not be powered up at the same time as the contactor. The duration of the control signal for the mechanical
latching block and the contactor should be ≥ 100 ms.
LA6DKkk
Characteristics: pages 100 - 102
Dimensions: pages 122, 123
Schematics: pages 126, 127
®
SERIPLEX Module
LR53531
Class 2252 01
File E114926
CCN NRAQ
Approvals
1 block per contactor
Clip-on front mounting
SERIPLEX
Operates coils up to
Catalog Number
Weight – lb (kg.)
LC1D09 to LC1D80
LP1D09 to LP1D80
277 Vac
24 Vdc
LA4SPX q
Contactor adaptor module f
LA4SPX
0.160 (0.072)
f
q
For more information, refer to SERIPLEX catalog 8330CT9601.
Attaches similarly to all other accessories.
108
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ D-Line Contactors and Starters
Selection of Low Voltage Ride Through Module
Selection of Low Voltage Ride Through Module
SEMI F47 Low Voltage Ride Through Module
By ensuring SEMI F47 compliance of AC powered IEC contactors and relays, the Low Voltage Ride Through Modules can be used to
increase the voltage sag immunity of semiconductor processing equipment. These modules make it possible for AC powered
TELEMECANIQUE contactors and relays to exceed the requirements of SEMI F47, both in the magnitude and duration of a voltage sag
event – even with accessories such as auxiliary contact blocks and pneumatic timers.
E1
E2
LADLVRT
1.9
(47)
A1
A2
More and more wafer fabs are insisting that front-end wafer processing equipment comply with SEMI F47. Many of the contactors and
pilot relays used on equipment, particularly in the EMO circuit, are not able to meet the standard. As a result, equipment can drop out
during a voltage sag of 50% in magnitude and 200ms in duration, causing equipment shutdown.
The Low Voltage Ride Through Modules can be used with TELEMECANIQUE contactors from 9A through 80A, as well as the CAD
series of control relays.
Selection
LADLVRT24V
LAD4BB
LADLVRT120V
LADLVRT208V
Bracket
Fuse
Contactors 32 A and less
LADLVRT
For use on LC1:
D09B7, D12B7,
D18B7, D25B7
For use on LC1:
D09G7, D12G7,
D18G7, D25G7
For use on LC1:
D09LE7, D12LE7,
D18LE7, D25LE7
LAD4BB*
LA9D941
D32B7, D40B7,
D50B7, D65B7, D80B7
D32G7, D40G7,
D50G7, D65G7, D80B7
D32LE7, D40L7,
D50L7, D65L7, D80B7
-
-
E1
A1
E2
1.3
CADxxxB7
CADxxxG7
CADxxxLE7
(32)
A2
A2
*
The Low Voltage Ride Through Module can be used with all TeSys control relays with 24 VAC, 120 VAC or 208 VAC dual frequency
A1
coils.
**
LAD4BB must be used when the Low Voltage Ride Through Module is being used with contactors 32 A and less, and TeSys CAD
Series of Control Relays.
Specifications
Continuous operating voltage range and line frequency
85–110% of the rated voltage at 47–63 Hz
1 front mount and 1 side mount auxiliary device for contactors
1 auxiliary device for TeSys Control Relays
Max. installed accessories
Dropout time
150 ms
Contactors 40 A - 80 A
Dimensions
20 operations/min. for LC1D09–LC1D32
30 operations/min. for LC1D40–LC1D80
Max. operation rate
Max. mechanical and electrical durability
Leakage current capability
MTBF
250 000 operations
6 ma maximum as per IEC 61131
100,000 hours
SEMI F47-0999, cULus, CE, UL 508
IEC 60947-5-1 (Control Circuit Devices and Switching Elements)
IEC 60068 (Mechanical Environmental Testing)
NSTA (Shipping and Handling)
IEC 61000-4-2 Electrostatic Discharge
IEC 61000-4-3 Electromagnetic Field
IEC 61000-4-4 Fast Transient and Burst
IEC 61000-4-5 Surge Immunity
1.77
45
Standards
IEC 61000-4-6 Conducted RFI
IEC 60068-2-6 Operational Vibration
IEC 60068-2-27 Operational Shock
Pickup performance
Storage temperature
Operating temperature
Relative humidity
per UL508 and IEC 60947
1.67
42.4
-40 to +80 °C (- 104 to + 176 °F)
0 to 40°C (32 to 104 °F) ambient surrounding ride through module
5 to 95%, at 40°C (104 °F) non-condensing
3000 meters (9842.4 ft)
Maximum operating altitude
1.51
38.4
(Initial Condition = Nominal Voltage)
90
80
70
Typical Wiring Scheme for 3-Wire Control
SEMI Ride Through Standard
Contactor Must Drop Out
L1
L2
60
Must NOT Drop Out above this line
Contactor Must Ride Through
50
40
30
LA9D941
E1 E2
LADLVRT***
LC1D09Ð32
LC1D40Ð80*
14
13
A1
A2
A1
A2
20
Must Drop Out below this line
10
Do not connect
0
Curves Extend
0.00
100.00
200.00
300.00
400.00
500.00
600.00
to 1000 ms
Duration (msec)
109
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ D-Line Contactors and Starters
Selection of Electronic Timers and Interface Modules
Selection of Electronic Timers and Interface Modules
LA4-DT
LA4-DF
LA4-DL
LA4-DW
LA4-DM
LAD-4BB **
LC1-D09 to D38 (AC only)
LC1DT20 to DT40 (AC only)
**See Cabling Accessories page 114.
110
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ D-Line Contactors and Starters
Selection of Electronic Timers and Interface Modules
q
Electronic Serial Timer Modules (1)
k
3-pole contactors LC1D40 to D150 and 4-pole contactors LC1D65 to D115: mounted directly across terminals A1 and A2 of contactor
(screw mounting).
On-delay Type
Operational Voltage
AC 24 to 250 V
Time
Catalog Number
Weight lb (kg)
100 to 250 V
0.1 to 2 s
LA4DT0U (2)
LA4DT2U (2)
LA4DT4U (2)
0.09 (0.040)
0.09 (0.040)
0.09 (0.040)
LC1
LC1
D09 to D38 (3P)
and DT20 to DT60 (4P)
1.5 to 30 s
25 to 500 s
D40 to D150 (3P)
Interface Modules
k
3-pole contactors LC1D40 to D150 and 4-pole contactors LC1D65 to D115: mounted directly across terminals A1 and A2 of contactor (
screw mounting).
Relay Interface
Operational Voltage
AC 24 to 250 V
Supply voltage
E1-E2 (dc)
Catalog Number
LA4DFBQ (2)
Weight lb (kg)
AC 380 to 415 V
LC1D09 to D150 (3P)
and DT20 to DT60 (4P)
–
24 V
0.12 (0.055)
–
24 V
48 V
LA4DFB (2)
LA4DFE (2)
0.11 (0.050)
0.11 (0.050)
LC1D09 to D150 (3P)
and DT20 to DT60 (4P)
Relay Interface with Manual Override Switch (output forced “ON”)
Operational Voltage
Supply Voltage
Catalog Number
Weight lb (kg)
E1-E2 (dc)
AC 24 to 250 V
AC 100 to 250 V
–
24 V
48 V
LA4DLB (2)
LA4DLE (2)
0.10 (0.045)
0.10 (0.045)
LC1D09 to D150 (3P)
and DT20 to DT60 (4P)
Solid State Interface
LC1D09 to D38 (3P)
and DT20 to DT60 (4P)
LC1D40 to D115 (3P)
24 V
LA4DWB (2)
0.10 (0.045)
Auto-Man-Stop Control Modules
For local override operation tests with two-position “Auto-Man” switch and “O-I” switch
k
3-pole contactors LC1D40 to D150 and 4-pole contactors LC1D65 to D115: mounted directly across terminals A1 and A2 of contactor
(screw mounting).
Operational voltage
AC 24 to 100 V
Catalog Number
Weight lb (kg)
AC 100 to 250 V
LC1D09 to D150 (3P)
and DT20 to DT60 (4P)
–
LA4DMK (2)
LA4DMU
0.09 (0.040)
0.09 (0.040)
–
LC1D40 to D150 (3P)
(1) For 24 V operation, the contactor must be fitted with a 21 V coil (code Z7). See pages 117.
(2) Mounting these accessories to TeSys LC1D09 through D38 AC controlled and LC1DT20 through DT40 AC controlled contactors requires the use
of the LAD4BB adaptor. This adapter can not be used on TeSys contactors with DC coils.
Characteristics: pages 103 - 105
Dimensions: pages 122, 123
Schematics: pages 126, 127
111
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ D-Line Contactors and Starters
Selection of Coil Suppressor Modules
Selection of Coil Suppressor Modules
RC Circuits (resistor-capacitor)
k
Effective protection for circuits highly sensitive to “high frequency” interference. For use only in cases where the voltage is virtually sinusoidal, i.e.
less than 5% total harmonic distortion.
k
k
Voltage limited to 3 Uc maximum and oscillating frequency limited to 400 Hz maximum.
Slight increase in drop-out time (1.2 to 2 times the normal time).
For use with Contactor (1)
Rating
Type
Mounting
Catalog Number
Weight lb (kg)
Vac
Vdc
D09 to D38 (3P)
and
DT20 to DT40
24 to 48
–
LAD4RCE
LAD4RCU
0.03 (0.012)
0.03 (0.012)
LAD4
Clip-on (3)
110 to 250
–
24 to 48
–
–
–
–
LA4DA2E
LA4DA2G
LA4DA2U
LA4DA2N
0.04 (0.018)
0.04 (0.018)
0.04 (0.018)
0.04 (0.018)
D40 to D150 (3P)
and
50 to 127
110 to 250
380 to 415
Screw mounting(4)
D40 to D115 (4P)
Varistors (peak limiting)
k
k
k
Protection provided by limiting the transient voltage to 2 Uc max.
Maximum reduction of transient voltage peaks.
Slight increase in drop-out time (1.1 to 1.5 times the normal time).
24 to 48
–
LAD4VE
0.03 (0.012)
0.03 (0.012)
0.03 (0.012)
0.04 (0.018)
0.04 (0.018)
0.04 (0.018)
0.04 (0.018)
0.04 (0.018)
0.04 (0.018)
LA4D
D09 to D38 (3P) (2)
DT20 to DT40
Clip-on (3)
50 to 127
110 to 250
24 to 48
50 to 127
110 to 250
–
–
LAD4VG
LAD4VU
LA4DE2E
LA4DE2G
LA4DE2U
LA4DE3E
LA4DE3G
LA4DE3U
–
–
D40 to D115 (3P)
and
D40 to D115 (4P)
Screw connection to the
contactor coil terminals
–
–
24 to 48
50 to 127
110 to 250
D40 to D115 (3P)
and
D40 to D115 (4P)
Screw connection of wire to the
contactor coil terminals
–
–
Diodes
k
k
k
No over voltage or oscillating frequency.
Increase in drop-out time (6 to 10 times the normal time).
Polarized component.
D40 to D95 (3P)
D40 and D80 (4P)
Screw mounting (4)
–
24 to 250
LA4DC3U
0.04 (0.018)
Bidirectional peak limiting diode
k
k
Protection provided by limiting the transient voltage to 2 Uc max.
Maximum reduction of transient voltage peaks.
D09 to D38 (3P) (2)
24
72
24
72
–
–
LAD4TB
0.03 (0.012)
0.03 (0.012)
0.04 (0.018)
0.04 (0.018)
0.04 (0.018)
0.04 (0.018)
Clip-on (3)
DT20 to DT40
–
LAD4TS
D40 to D95 (3P)
D40 and D80 (4P)
D40 to D95 (3P)
D40 and D80 (4P)
–
LA4DB2B
LA4DB2S
LA4DB3B
LA4DB3S
–
Screw mounting (4)
24
72
–
(1) For satisfactory protection, a suppressor module must be installed across the coil of each contactor.
(2) From LC1D09 to D38 and LC1DT20 to DT40, dc and low consumption 3-pole contactors are fitted with built-in suppression as standard.
(3) Clipping-on makes the electrical connection. The overall size of the contactor remains unchanged.
(4) Mounting at the top of the contactor on coil terminals A1 and A2.
Characteristics: pages 100 - 102
Dimensions: pages 122, 123
Schematics: pages 126, 127
112
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ D-Line Contactors and Starters
Selection of Accessories for Contactors and Reversing Contactors
Selection of Accessories for Contactors and Reversing Contactors
Accessories for Main Pole and Control Connections
For Use on Contactors
Description
Sold In
Lots Of
Weight
lb (kg)
Catalog Number
AC
DC
4-pole 10 mm2 (8 AWG)
3-pole 25 mm2 (4 AWG)
4-pole 25 mm2 (4 AWG)
D09, D12, DT20, DT25
D09 to D38
D09, D12, DT20, DT25
D09 to D38
1
1
1
1
LAD92560
LA9D3260
LAD96060
LA9D115603B
0.67 (0.030)
0.09 (0.040)
0.13 (0.060)
1.2 (0.560)
Connectors for
cable, sizes
(1 connector)
DT32 to DT40
DT32 to DT40
D115, D150
Connectors for
cable, sizes
(2 connectors)
3-pole 120 mm2(250 MCM) D115, D150
4-pole 120 mm2 (250 MCM) D115
LA9D3260
D115
1
1
1
1
LA9D115604
LA9D115503B
LA9D115504
LA9D115703
1.6 (0.740)
0.66 (0.300)
0.80 (0.360)
0.55 (0.250)
Connector for lug 3-pole
D115, D150
D115
D115, D150
D115
type terminals
(2 connectors)
4-pole
Protective
covers for
lug type
3-pole (1)
D115, D150
D115, D150
4-pole (1)
D115, D150
D115, D150
1
LA9D115704
0.66 (0.300)
terminals
D09 to D38
DT20 & DT25 (4P)
DT32 to DT40 (4P)
D40 to D65
D80, D95
D09 to D38
DT20 & DT25 (4P)
DT32 to DT40 (4P)
D40 to D65
D80
10
10
10
2
LA9D2561
LA9D1261
LAD96061
LA9D40961
LA9D80961
LAD9P3 (2)
LA9D80962
LA9D1263
LA9D40963
LA9D80963
LA9D09966
LA9D6567
LA9D8067
GV7AC03
0.13 (0.060)
0.03 (0.012)
0.13 (0.060)
0.05 (0.021)
0.13 (0.060)
0.01 (0.005)
0.18 (0.080)
0.05 (0.024)
0.15 (0.070)
0.22 (0.100)
0.01 (0.006)
0.02 (0.010)
0.02 (0.010)
0.4 (0.180)
LA9D11550•
2 poles
Links for
parallel
connection of
2
D09 to D38
D80, D95
D09 to D38
D80
10
1
3 poles (star connection)
4 poles
DT20 to DT40
D40 to D65
D80, D95
DT20 to DT40
D40 to D65
D80
2
2
2
Staggered coil connection
–
D40 to D80
D40 to D65
D80
10
10
10
3
D40 to D65
D80, D95
Control circuit take-off from main pole
Spreaders for increasing the pole pitch to 45 mm D115, D150
D115, D150
LA9D11560•
(1) For 3-pole contactors: 1 set of 6 covers, for 4-pole contactors: 1 set of 8 covers.
(2) Separate connecting bar for connecting 2 poles in parallel.
Dimensions: pages 122, 123
Schematics: pages 126, 127
LA9D11570•
LA9D80962
113
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ D-Line Contactors and Starters
Selection of Accessories for Contactors and Reversing Contactors
Sets of Contacts and Arc Chambers
Description
For Use on Contactors
Catalog Number
LA5D1158031
LA5D150803
LA5D115804
LA5D11550
Weight lb (kg)
0.60 (0.260)
0.60 (0.260)
0.72 (0.330)
0.87 (0.395)
0.87 (0.395)
1.03 (0.470)
3-pole
LC1D115
Set of contacts
LC1D150
4-pole
3-pole
4-pole
LC1D115004
LC1D115
Arc chambers
LC1D150
LA5D15050B
LA5D115450B
GV2G245
LC1D115004
Cabling Accessories
Without coil suppression
LAD4BB
0.04 (0.019)
0.03 (0.014)
0.03 (0.014)
0.03 (0.014)
0.08 (0.036)
0.17 (0.077)
0.09 (0.040)
LC1D09 to D38
and
LC1DT20 to DT60
AC only
ac 24 to 48 V
ac 50 to 127 V
ac 110 to 250 V
LAD4BBVE
LAD4BBVG
LAD4BBVU
GV2G245
GV2G445
GV1G09
For adapting existing wiring
to a new product
With coil
suppression
2 contactors LC1D09 to D18 or D25 to D38
4 contactors LC1D09 to D18 or D25 to D38
One or more GV2G busbar sets
Set of 63 A busbars for
paralleling of contactors
Terminal block for supply to:
GV1G09
Protection Accessories
Description
Application
Sold in Lots Of
Catalog Number
LA9D941
Weight lb (kg)
0.05 (0.025)
0.01 (0.005)
0.06 (0.026)
0.03 (0.012)
0.008 (0.004)
0.008 (0.004)
Miniature fuse holder
Sealing cover
5 x 20 with 4 A-250 V fuse
For LADT, LADR
1
1
1
1
1
1
LA9D901
LC1D09 to D38 and DT20 to DT60
LC1D40 to D65
LAD9ET1
LAD9ET2
LAD9ET3
LAD9ET4
Safety cover
preventing access to the
moving contact carrier
LC1D80 and D95
LC1D115 and D150
LA9D941
Marking Accessories
Description
Application
Sold in Lots Of
Catalog Number
LAD21
Weight lb (kg)
Sheet of 80 blank labels
self-adhesive, 8 x 33 (1)
Contactors (excluding 4-pole LC1-D65 to
D115) LADN (4 contacts), LA6DK
10
0.04 (0.020)
Sheet of 80 blank labels
self-adhesive, 8 x 12 (1)
LADN (2 contacts),
LADT, LADR, LRD
10
10
LAD22
LAD23
0.04 (0.020)
0.11 (0.050)
Sheet of 80 blank labels
for marking using plotter or
8 x 33 engraver
Contactors (excluding
4-pole LC1D65 to D115)
LAD (4 contacts), LA6DK
LAD9ET•
Sheet of 112 blank labels for
marking using plotter or 8 x 12 mm
engraver
All products
35
LAD24
0.44 (0.200)
4-pole contactors LC1D65 and D80,
LA6DK
Label holder snap-in, 8 x 22 mm
100
LA9D92
0.002 (0.001)
LC1DO9 to D38
LC1DT20 to D40
LADkN (4 contacts)
LADkT, LADkR
Legend holder snap-in, 8 x 22 mm
100
LAD90
0.002 (0.001)
Bag of 300 blank labels
self-adhesive, 7 x 21 mm
On holder LA9D92
1
1
LA9D93
XBY2U
0.002 (0.001)
0.13 (0.060)
“SIS Label” label creation software Multi-language version (EN, FR, GE) q
q
System requirement: 486 processor or better; Windows 95, 98 or NT 4.0 or better.
Mounting Accessories
XBY1U
For replacement of LC1F115
or F150 by LC1D115 or D150
Mounting plate
1
1
LA9D730
LA9D511
0.80 (0.360)
0.04 (0.020)
For fitting side mounting blocks
LAD8N on LC1D40 to D95
Set of shims
(1) These legends are for sticking onto the safety cover of the contactors or add-on block, if fitted.
114
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ D-Line Contactors and Starters
D-line Voltage Code Table
D-line Voltage Code Table
D-line Voltage Code
D-line Voltage Code (Continued)
D-line (see notes at end of table)
D-line (see notes at end of table)
LC1D09 -
D38
LC2D09 -
D38
LC1D40 -
D95
LC2D40 -
D95
LC1D09 -
D38
LC2D09 -
D38
LC1D40 -
D95
LC2D40 -
D95
LC1D115 -
D150
Note
LC1D115 -
D150
Note
Voltage
5
Frequency
Voltage
Frequency
D1, D2, D4
D1, D2, D4
Notes D1, D3
Note D1
Notes D1, D3
Note D1
Low Consump
DC
AL
-
-
50/60
50
F7
F7
F5
F6
-
F7
F5
F6
-
-
-
50/60
50
J7
-
-
-
-
-
60
J5
JD
40-400
DC
-
DC
JD
110
FD
FD
FD
12
Low Consump
DC
JL
-
-
-
-
Low Consump
DC
FL
-
-
-
-
Wide Range
DC
JW
Wide Range
DC
FW
50/60
50
-
-
-
-
Z7
Z5
Z6
-
-
-
-
-
110/127
115
40-400
50/60
50
-
-
FE7
FE5
-
-
FE7
FE5
-
FE7
60
20
-
DC
40-400
50/60
50
-
Low Consump
DC
ZL
-
-
G7
G7
-
G7
-
-
-
-
-
50/60
50
B7
B7
B5
B6
-
B7
B5
B6
-
60
G6
-
G6
-
-
-
120
40-400
DC
60
-
-
40-400
DC
-
24
Low Consump
DC
BD
BD
BD
-
-
-
Low Consump
DC
BL
-
-
-
-
125
127
DC
50/60
60
GD
GD
GD
FC7
-
FC7
Wide Range
DC
BW
-
G5
FC5
50/60
DC
CC7
CD
-
-
40-400
DC
-
-
-
CD
CD
155
174
PD
-
-
36
42
Wide Range
DC
DC
-
-
L7
-
-
-
-
CW
-
50/60
DC
L7
200
50/60
50
D7
D7
D5
-
D7
D5
-
-
-
-
-
50/60
60
-
-
-
60
200/208
-
-
-
50/60
50
E7
-
E7
E5
E6
-
E7
E5
E6
-
40-400
50/60
60
-
-
-
LE7
LE7
L6
-
LE7
L6
-
60
-
208
220
-
40-400
DC
-
40-400
50/60
50
-
M7
-
48
ED
ED
ED
M7
-
M7
M5
M6
-
Low Consump
DC
EL
-
-
-
-
60
-
M6
-
Wide Range
DC
EW
40-400
DC
-
50/60
DC
EE7
ND
SD
-
-
MD
MD
MD
60
72
ND
SD
ND
SD
Low Consump
DC
ML
-
-
-
-
DC
Wide Range
DC
Low Consump
DC
MW
SL
-
-
SW
-
-
-
-
50/60
50
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Wide Range
DC
M5
Low Consump
DC
220/230
220/240
60
-
-
-
-
-
96
DL
40-400
DC
50/60
DC
K7
-
K7
-
-
-
100
40-400
DC
115
08/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ D-Line Contactors and Starters
D-line Voltage Code Table
D-line Voltage Code (Continued)
D-line Voltage Code (Continued)
D-line (see notes at end of table)
D-line (see notes at end of table)
LC1D09 -
D38
LC2D09 -
D38
LC1D40 -
D95
LC2D40 -
D95
LC1D09 -
D38
LC2D09 -
D38
LC1D40 -
D95
LC2D40 -
D95
LC1D115 -
D150
Note
LC1D115 -
D150
Note
Voltage
Frequency
Voltage
Frequency
D1, D2, D4
D1, D2, D4
Notes D1, D3
Note D1
Notes D1, D3
Note D1
50/60
50
P7
P7
P5
-
P7
P5
-
50/60
60
X7
X6
-
-
X6
-
-
-
-
-
-
-
U7
600
660
230
230/240
240
60
-
40-400
50
40-400
DC
-
-
-
Y5
-
Y5
-
-
-
-
60
50/60
50/60
50
-
U7
-
-
-
660/690
Notes:
50/60
-
-
U7
U5
U6
-
U7
U5
U6
-
D1 For operating ranges refer to technical data section of the D-line contactors. Ranges vary
as a function of the current rating of the
60
-
contactor and type of supply (AC/DC)
40-400
DC
-
D2 LC1-D150 Contactors utilize dual frequency 50/60 Hz. coils only. Single frequency coils
are not available.
-
-
-
DC
UD
UD
UD
D3 LC1D09 -LC1D38 contactors with DC coil have integral suppression device (bi-directional
diode) as standard.
250
256
Low Consump
DC
UL
-
-
D4 D115 and D150 coils have integral suppression device fitted as standard.
50/60
50
-
-
W5
-
-
-
-
50/60
50
W7
UE7
W6
-
277
380
-
W6
-
40-400
50/60
50
-
Q7
Q7
-
Q7
Q5
Q6
-
-
60
-
Q6
-
40-400
50/60
50
-
-
-
-
-
Q5
-
-
380/400
60
-
-
40-400
DC
-
-
-
-
-
-
380/440
400
40-400
50/60
50
-
-
-
V7
V7
V5
-
V7
V5
-
-
40-400
50/60
50/60
50
-
400/415
415
-
-
-
N7
N7
N5
-
N7
N5
-
-
40-400
50
-
-
-
-
415-440
440
40-400
50/60
50
-
-
-
R7
R7
R5
R6
-
R7
R5
R6
-
-
60
-
40-400
DC
-
RD
RD
-
RD
-
440/460
460/480
DC
-
60
-
-
-
50/60
50
T7
-
T7
-
-
-
480
60
-
T6
-
T6
-
40-400
50/60
50
-
S7
-
S7
S5
-
500
575
-
S5
-
40-400
50/60
60
-
SC7
-
-
-
S6
-
116
© 2001-2004 Schneider Electric All Rights Reserved
08/04
TeSys™ D-Line Contactors and Starters
Selection of AC Coils
Selection of AC Coils
AC Coils for Contactors LC1D09 to D38 3-pole and 4-pole LC1DT20 to DT40
Specifications
Control circuit voltage Uc
V
Average resistance at 20 °C ± 10%
Inductance of closed circuit Catalog Number (1)
Weight lb (kg)
Ω
H
50/60 Hz
Average consumption at 20 °C (68 °F):
- inrush (cos ϕ = 0.75) 70 VA,
- sealed (cos ϕ = 0.3) 50 Hz: 7 VA, 60 Hz: 7.5 VA.
Operating range (θ ≤ 60 °C / 140 °F): 50 Hz: 0.8 to 1.1 Uc, 60 Hz: 0.85 to 1.1 Uc.
12
6.3
0.26
0.24
0.26
0.48
LXD1J7
LXD1Z7
LXD1B7
LXD1C7
LXD1CC7
LXD1D7
LXD1E7
LXD1EE7
LXD1K7
LXD1F7
LXD1FE7
LXD1G7
LXD1FC7
LXD1L7
LXD1LE7
LXD1M7
LXD1P7
LXD1U7
LXD1W7
LXD1Q7
LXD1V7
LXD1N7
LXD1R7
LXD1T7
LXD1SC7
LXD1X7
LXD1Y7
0.15 (0.070)
0.15 (0.070)
0.15 (0.070)
0.15 (0.070)
0.15 (0.070)
0.15 (0.070)
0.15 (0.070)
0.15 (0.070)
0.15 (0.070)
0.15 (0.070)
0.15 (0.070)
0.15 (0.070)
0.15 (0.070)
0.15 (0.070)
0.15 (0.070)
0.15 (0.070)
0.15 (0.070)
0.15 (0.070)
0.15 (0.070)
0.15 (0.070)
0.15 (0.070)
0.15 (0.070)
0.15 (0.070)
0.15 (0.070)
0.15 (0.070)
0.15 (0.070)
0.15 (0.070)
21 (2)
24
5.6
LXD1k
6.19
12.3
12.83
19.15
25
32
36
42
0.77
1
48
60
34.6
100.4
130
–
100
110
115
120
127
200
208
220
230
240
277
380
400
415
440
480
575
600
690
–
5.5
–
129.8
159
6.7
7.5
–
192.5
410.7
417
16
22
21
25
30
60
64
74
79
85
119
135
190
539
595
645
781
1580
1810
1938
2242
2300
3432
3600
5600
(1) The last two digits of the reference represent the voltage code.
(2) Voltage for special coils installed in contactors with serial timer modules, with 24 V supply.
117
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ D-Line Contactors and Starters
Selection of AC Coils
AC Coils for 3 or 4-pole Contactors LC1D40, D50, D65, D80, D95
Specifications
Control circuit Average resistance
Inductance of
closed circuit
Catalog
Number (1)
Average resistance Inductance of Catalog
voltage Uc
at 20 °C ± 10%
at 20 °C ± 10%
closed circuit Number (1)
Weight lb (kg)
V
Ω
H
50 Hz
W
H
60 Hz
Average consumption at 20 °C (68 °F):
- inrush (cos ϕ = 0.75) 50 Hz: 200 VA, 60 Hz: 220 VA,
- sealed (cos ϕ = 0.3) 50 Hz: 20 VA, 60 Hz: 22 VA.
Operating range (θ ≤ 55 °C / 131 °F): 0.85 to 1.1 Uc.
24
1.4
2.6
4.4
5.5
31
0.09
0.16
0.27
0.35
1.9
1.9
–
LX1D6B5
LX1D6C5
LX1D6D5
LX1D6E5
LX1D6F5
LX1D6FE5
–
1.05
–
0.06
–
LX1D6B6
0.61 (0.280)
0.61 (0.280)
0.61 (0.280)
0.61 (0.280)
0.61 (0.280)
0.61 (0.280)
0.61 (0.280)
0.61 (0.280)
0.61 (0.280)
0.61 (0.280)
0.61 (0.280)
0.61 (0.280)
0.61 (0.280)
0.61 (0.280)
0.61 (0.280)
0.61 (0.280)
0.61 (0.280)
0.61 (0.280)
0.61 (0.280)
0.61 (0.280)
0.61 (0.280)
0.61 (0.280)
0.61 (0.280)
0.61 (0.280)
0.61 (0.280)
32
–
42
–
–
–
48
4.2
22
–
0.23
1.2
–
LX1D6E6
LX1D6k
110
LX1D6F6
115
31
–
120
–
28
–
1.5
–
LX1D6G6
127
41
2.4
–
LX1D6G5
–
–
208
–
86
98
–
4.3
4.8
–
LX1D6L6
220
–
–
–
LX1D6M6
220/230
230
127
133
152
166
–
7.5
8.1
8.7
10
–
LX1D6M5
LX1D6P5
LX1D6U5
LX1D6W5
–
–
–
–
–
240
120
–
5.7
–
LX1D6U6
256
–
277
157
300
–
8
LX1D6W6
380
–
–
–
14
–
LX1D6Q6
380/400
400
381
411
463
513
–
22
25
26
30
–
LX1D6Q5
LX1D6V5
LX1D6N5
LX1D6R5
–
–
–
–
–
415
–
–
–
440
392
480
–
19
23
–
LX1D6R6
LX1D6T6
–
480
500
668
–
38
–
LX1D6S5
–
575
675
775
–
33
36
–
LX1D6S6
LX1D6X6
–
600
–
–
–
660
1220
67
LX1D6Y5
Specifications
Average consumption at 20 °C (68 °F):
- inrush (cos ϕ = 0.75) 50/60 Hz: 245 VA at 50 Hz,
- sealed (cos ϕ = 0.3) 50/60 Hz: 26 VA at 50 Hz.
Operating range (θ ≤ 55 °C / 131 °F): 0.85 to 1.1 Uc.
50/60 Hz
24
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
1.22
3.5
5
0.08
0.25
0.32
1.7
–
LX1D6B7
LX1D6D7
LX1D6E7
LX1D6F7
LX1D6FE7
LX1D6G7
LC1D6LE7
LX1D6M7
LX1D6P7
LX1D6U7
LX1D6Q7
LX1D6V7
LX1D6N7
LX1D6R7
0.61 (0.280)
0.61 (0.280)
0.61 (0.280)
0.61 (0.280)
0.61 (0.280)
0.61 (0.280)
0.61 (0.280)
0.61 (0.280)
0.61 (0.280)
0.61 (0.280)
0.61 (0.280)
0.61 (0.280)
0.61 (0.280)
0.61 (0.280)
42
48
110
26
115
–
120
32
2
208
88.7
102
115
131
310
349
390
410
4.42
6.7
7.7
8.3
20
220/230 (2)
230
230/240 (3)
380/400 (4)
400
23
415
24
440
27
(1) The last two digits of the reference represent the voltage code.
(2) For use on 230 V 50 Hz, apply a coefficient of 0.6 to the mechanical durability of the contactor (see page 82). This coil can be used on 240 V at 60 Hz.
(3) This coil can be used on 220/240 V at 50 Hz and on 240 V only at 60 Hz.
(4) For use on 400 V 50 Hz, apply a coefficient of 0.6 to the mechanical durability of the contactor.
118
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ D-Line Contactors and Starters
Selection of AC Coils
Selection of AC Coils
AC Coils for 3 or 4-pole Contactors LC1D115
Control circuit Average resistance Inductance of Catalog
Average resistance Inductanceof Catalog
Weight lb (kg)
kg
voltage Uc
at 20 °C ± 10%
closed circuit Number(1)
at 20 °C ± 10%
closed circuit Number (1)
V
Ω
H
50 Hz
Ω
H
60 Hz
Specifications
Average consumption at 20 °C (68 °F):
- inrush (cos ϕ = 0.8) - 50 or 60 Hz: 300 VA,
- sealed (cos ϕ = 0.3) - 50 or 60 Hz: 22 VA.
Operating range (θ ≤ 55 °C / 131°F): 0.85 to 1.1 Uc.
24
1.24
0.09
0.17
0.28
0.36
2.00
2.00
–
LX1D8B5
LX1D8C5
LX1D8D5
LX1D8E5
LX1D8F5
LX1D8FE5
–
0.87
–
0.07
–
LX1D8B6
0.57 (0.260)
0.57 (0.260)
0.57 (0.260)
0.57 (0.260)
0.57 (0.260)
0.57 (0.260)
0.57 (0.260)
0.57 (0.260)
0.57 (0.260)
0.57 (0.260)
0.57 (0.260)
0.57 (0.260)
0.57 (0.260)
0.57 (0.260)
0.57 (0.260)
0.57 (0.260)
0.57 (0.260)
0.57 (0.260)
0.57 (0.260)
32
2.14
–
42
3.91
–
–
–
48
4.51
3.91
19.97
–
0.28
1.45
–
LX1D8E6
LX1D8F6
–
LX1D8kk
110
115
120
127
208
220
230
240
277
380
400
415
440
480
500
26.53
26.53
–
24.02
–
1.70
–
LX1D8G6
–
32.75
–
2.44
–
LX1D8FC5
–
67.92
79.61
–
5.06
5.69
–
LX1D8L6
LX1D8M6
–
104.77
104.77
125.25
–
7.65
8.29
8.89
–
LX1D8M5
LX1D8P5
LX1D8U5
–
97.04
125.75
243.07
–
6.75
8.89
17.04
–
LX1D8U6
LX1D8W6
LX1D8Q6
–
338.51
368.43
368.43
441.56
–
22.26
25.55
27.65
30.34
–
LX1D8Q5
LX1D8V5
LX1D8N5
LX1D8R5
–
–
–
–
338.51
368.43
–
22.26
25.55
–
LX1D8R6
LX1D8T6
–
566.62
38.12
LX1D8S5
For 3 or 4-pole contactors LC1D115, D150
Specifications
Average consumption at 20 °C (68 °F):
- inrush: cos ϕ = 0.9 - 280 to 350 VA,
- sealed: cos ϕ = 0.9 - 2 to 18 VA.
Operating range (θ ≤ 55 °C / 131 °F): 0.8 to 1.15 Uc.
Coils with integral suppression device fitted as standard, class B.
50/60 Hz
24
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
147
3.03
LX1D8B7
LX1D8C7
LX1D8D7
LX1D8E7
LX1D8F7
LX1D8FE7
LX1D8G7
LX1D8FC7
LX1D8LE7
LX1D8M7
LX1D8P7
LX1D8U7
LX1D8UE7
LX1D8Q7
LX1D8V7
LX1D8N7
LX1D8R7
LX1D8T7
LX1D8S7
0.64 (0.290)
0.64 (0.290)
0.64 (0.290)
0.64 (0.290)
0.64 (0.290)
0.64 (0.290)
0.64 (0.290)
0.64 (0.290)
0.64 (0.290)
0.64 (0.290)
0.64 (0.290)
0.64 (0.290)
0.64 (0.290)
0.64 (0.290)
0.64 (0.290)
0.64 (0.290)
0.64 (0.290)
0.64 (0.290)
0.64 (0.290)
32
301
8.28
42
498
13.32
48
1061
24.19
110
115
120
127
208
220
230
240
277
380
400
415
440
480
500
4377
109.69
109.69
109.69
152.65
260.15
210.72
210.72
210.72
533.17
482.42
482.42
482.42
507.47
938.41
938.41
4377
4377
6586
10 895
9895
9895
9895
21 988
21 011
21 011
21 011
21 501
32 249
32 249
(1) The last two characters of the reference represent the voltage code.
119
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ D-Line Contactors and Starters
Selection of DC Coils
Selection of DC Coils
DC Coils for 3-pole Contactors LC1D40 to D65 or 4-pole Contactors LP1D65
Control circuit voltage Uc Average resistance at 20 °C ± 10% Inductance of closed circuit Catalog Number (1)
Weight lb (kg)
V
Ω
H
Specifications
Average consumption: 22 W.
Operating range: 0.85 to 1.1 Uc.
12
7.1
0.44
1.69
3.55
6.86
10.9
14.7
35.28
45.2
142
LX4D6JD
LX4D6BD
LX4D6CD
LX4D6ED
LX4D6ND
LX4D6SD
LX4D6FD
LX4D6GD
LX4D6MD
LX4D6UD
LX4D6RD
0.91 (0.415)
0.91 (0.415)
0.91 (0.415)
0.91 (0.415)
0.91 (0.415)
0.91 (0.415)
0.91 (0.415)
0.91 (0.415)
0.91 (0.415)
0.91 (0.415)
0.91 (0.415)
24
26.8
58
36
LX4D6kk
48
109
173
234
560
717
2255
2940
9080
60
72
110
125
220
250
440
185
572
For 3-pole contactors LC1D80 or 4-pole contactors LP1D80
Specifications
Average consumption: 22 W.
Operating range: 0.85 to 1.1 Uc.
12
6.6
0.46
1.89
4
LX4D7JD
LX4D7BD
LX4D7CD
LX4D7ED
LX4D7ND
LX4D7SD
LX4D7FD
LX4D7GD
LX4D7MD
LX4D7UD
LX4D7RD
1.50 (0.680)
1.50 (0.680)
1.50 (0.680)
1.50 (0.680)
1.50 (0.680)
1.50 (0.680)
1.50 (0.680)
1.50 (0.680)
1.50 (0.680)
1.50 (0.680)
1.50 (0.680)
24
27
36
57
48
107
170
230
564
718
2215
2850
9195
7.5
60
11.9
16.1
39.5
50.3
155
200
640
72
110
125
220
250
440
LX4D7kk
(1)1 The last two characters of the reference represent the voltage code.
120
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ D-Line Contactors and Starters
Selection of DC Coils
DC Coils for 3 or 4-pole Contactors LC1D115, D150
Control circuit voltage Uc Average resistance at 20 °C ± 10%
Inductance of closed circuit
Catalog
Number(1)
Weight lb (kg)
V
Ω
H
Specifications
Consumption: inrush 270 to 365 W, sealed 2.4 to 5.1 W.
Operating range: 0.7 to 1.2 Uc.
Coils have integral suppression device as standard, class B.
24
147
3.03
LX4D8BD
LX4D8ED
LX4D8ND
LX4D8SD
LX4D8FD
LX4D8GD
LX4D8MD
LX4D8UD
LX4D8RD
0.66 (0.300)
0.66 (0.300)
0.66 (0.300)
0.66 (0.300)
0.66 (0.300)
0.66 (0.300)
0.66 (0.300)
0.66 (0.300)
0.66 (0.300)
48
1061
1673
2500
4377
6586
9895
18 022
21 501
24.19
38.44
56.27
109.69
152.65
210.72
345.40
684.66
60
LX4D8kD
72
110
125
220
250
440
(1) The last two characters of the reference represent the voltage code.
Wide Range DC Coils for 3-pole Contactors LC1D40 to D65 or 4-pole Contactors LP1 to D65
Control circuit voltage Uc
Average resistance at 20 °C ± 10%
Inductance of closed circuit
Catalog Number(1)
Weight lb (kg)
V
Ω
H
Specifications
Average consumption: 22 W.
Operating range: 0.75 to 1.2 Uc.
Coils with “TH” treatment as standard.
12
6.8
0.45
1.9
LX4D6JW
LX4D6BW
LX4D6CW
LX4D6EW
LX4D6SW
LX4D6FW
LX4D6MW
0.91 (0.415)
0.91 (0.415)
0.91 (0.415)
0.91 (0.415)
0.91 (0.415)
0.91 (0.415)
0.91 (0.415)
24
30
36
53
3.5
LX4D6kk
48
110
215
580
2120
7.2
72
14.2
38.3
140
110
220
For 3-pole contactors LC1D80 or 4-pole contactors LP1D80
Specifications
Average consumption: 23 W.
Operating range: 0.75 to 1.2 Uc.
Coils with “TH” treatment as standard.
12
6.2
0.49
1.75
4.18
7
LX4D7JW
LX4D7BW
LX4D7CW
LX4D7EW
LX4D7SW
LX4D7FW
LX4D7MW
1.50 (0.680)
1.50 (0.680)
1.50 (0.680)
1.50 (0.680)
1.50 (0.680)
1.50 (0.680)
1.50 (0.680)
24
23.5
51.9
94.2
204
483
1922
36
48
72
15.7
36
110
220
144
(1) The last two characters of the reference represent the voltage code.
121
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ D-Line Contactors and Starters
Dimensions for Type LC1D Contactors
Dimensions for Type LC1D Contactors
D-Line Contactors AC Control Circuits
X
LC1D09 to D18 (3-pole)
LC1D25 to D38 (3-pole)
LC1DT20 to DT40 (4-pole)
1.73
44
1.73
44
Minimum electrical clearance
Minimum electrical clearance
LA4
LA4
0.39
10
0.49
12.5
(LAD-8)
1.77
45
c
c1
c2
0.39
10
c
0.49
12.5
(LAD-8)
1.77
45
c1
c2
c3
c3
LC1
D09 to
D18
3.03 (77)
3.70 (94)
D093 to
D183
3.89 (99)
4.21 (107)
D099 to
D189
3.14 (80)
3.75 (95.5)
D25 to
D38
3.36 (85)
3.85 (98)
D253
DT20
DT203
DT32 to
DT40
3.58 (91)
–
–
–
DT323
and DT403
4.13 (105)
–
–
–
and D323
3.89 (99)
4.21 (107)
and DT25
3.34 (85)
3.85 (98)
and DT253
3.89 (99)
–
–
–
b
without add-on blocks
b1 with LAD4BB
with LA4D•2
4.33 (110) (1) 4.84 (123) (1) 4.30 (111.5) (1) 4.48 (114) (1) 4.84 (123) (1) 4.48 (114)
4.68 (119) (1) 5.19 (132) (1) 4.76 (120.5) (1) 4.84 (123) (1) 5.19 (132) (1) 5.02 (129)
with LA4DF, DT
with LA4DR, DW, DL
4.96 (126) (1) 5.67 (139) (1) 5.0 (127.5) (1)
5.11 (130) (1) 5.47 (139) (1) 7.48 (190)
–
–
–
c
without cover or add-on blocks
with cover, without add-on blocks
3.30 (84)
3.38 (86)
4.60 (117)
5.07 (129)
5.39 (137)
5.55 (141)
3.30 (84)
3.38 (86)
4.60 (117)
5.07 (129)
5.39 (137)
5.59 (141)
3.30 (84)
3.38 (86)
4.60 (117)
5.07 (129)
5.39 (137)
5.55 (141)
3.54 (90)
3.62 (92)
4.84 (123)
5.31 (135)
5.62 (143)
5.78 (147)
3.54 (90)
3.62 (92)
4.84 (123)
5.31 (135)
5.62 (143)
5.78 (147)
3.54 (90)
3.62 (92)
4.84 (123)
5.31 (135)
5.62 (143)
5.78 (147)
3.54 (90)
3.62 (92)
4.84 (123)
5.31 (135)
5.62 (143)
5.78 (147)
3.85 (98)
3.93 (100)
5.15 (131)
5.62 (143)
5.94 (151)
6.10 (155)
3.85 (98)
3.93 (100)
5.15 (131)
5.62 (143)
5.94 (151)
6.10 (155)
c1 with LADN or C (two or four contacts)
c2 with LA6DK10, LAD6K10
c3 with LADT, R, S
with LADT, R, S and sealing cover
(1) Including LAD4BB
LC1D40 to D65 (3-pole)
LC1D80 and D95 (3-pole)
LC1D65004, D40008 and D65008 (4-pole)
LC1D80004 and D80008 (4-pole)
1.26
32
1.73
44
1.26 1.73
44
32
Minimum electrical clearance
Minimum electrical clearance
LA4
LA4
0.49
12.5
(LAD-8)
a
0.49
12.5
(LAD-8)
0.47
12
c
0.47
12
c
c1
c2
0.49
12.5
(LAD-8)
a
0.49
12.5
c1
c2
c3
(LAD-8)
c3
D40 to D65
D40008
D80
D95
D80004
D80008
LC1
D65004
D65008
a
2.95 (75)
5.31 (135)
–
3.34 (85)
5.31 (135)
–
5.59 (142)
5.90 (150)
4.92 (125)
–
5.47 (139)
5.78 (147)
6.25 (159)
6.57 (167)
6.73 (171)
3.34 (85)
3.34 (85)
5.31 (135)
–
96
96
b1 with LA4D•2
with LA4DB3
5.31 (135)
5.31 (135)
5.59 (142)
5.90 (150)
4.92 (125)
5.11 (130)
5.90 (150)
6.22 (158)
6.69 (170)
7.00 (178)
7.16 (182)
5.31 (135)
–
5.31 (135)
–
5.59 (142)
5.90 (150)
5.51 (140)
–
5.90 (150)
6.22 (158)
6.69 (170)
7.00 (178)
7.16 (182)
with LA4DF, DT
with LA4DM, DR, DW, DL
without cover or add-on blocks
with cover, without add-on blocks
5.59 (142)
5.90 (150)
4.72 (114)
4.68 (119)
5.47 (139)
5.78 (147)
6.25 (159)
6.57 (167)
6.73 (171)
5.59 (142)
5.90 (150)
4.92 (125)
5.11 (130)
5.90 (150)
6.22 (158)
6.69 (170)
7.00 (178)
7.16 (182)
5.59 (142)
5.90 (150)
4.92 (125)
–
5.90 (150)
6.22 (158)
6.69 (170)
7.00 (178)
7.16 (182)
c
c1 with LADN (one contact)
with LADN or C (two or four contacts)
c2 with LA6DK
c3 with LADT, R, S
with LADT, R, S and sealing cover
LC1D115 and D150 (3-pole)
LC1D115004 (4-pole)
D115
D115004
D115006
D150006
D1150046
LC1
D150
Minimum electrical clearance
LAD-8
LA4
a
4.72 (120)
6.85 (174)
7.28 (185)
7.40 (188)
7.40 (188)
5.1‘9 (132)
5.35 (136)
5.90 (150)
6.10 (155)
6.61 (168)
6.77 (172)
5.90 (150)
6.85 (174)
7.28 (185)
7.40 (188)
7.40 (188)
5.1‘9 (132)
–
5.90 (150)
6.10 (155)
6.61 (168)
6.77 (172)
4.72 (120)
6.85 (174)
7.28 (185)
7.40 (188)
7.40 (188)
4.52 (115)
–
5.90 (150)
6.10 (155)
6.61 (168)
6.77 (172)
4.72 (120)
6.85 (174)
7.28 (185)
7.40 (188)
–
4.52 (115)
–
5.90 (150)
6.10 (155)
6.61 (168)
6.77 (172)
6.10 (155)
6.85 (174)
7.28 (185)
7.40 (188)
7.40 (188)
4.52 (115)
–
5.90 (150)
6.10 (155)
6.61 (168)
6.77 (172)
b1 with LA4DA2
with LA4DF, DT
with LA4DM, DR, DL
with LA4DW
0.39
10
c
without cover or add-on blocks
with cover, without add-on blocks
c
c1
c2
a
c1 with LADN or C (two or four contacts)
c2 with LA6DK20
c3 with LADT, R, S
c3
with LADT, R, S and sealing cover
Selection: pages 142, 143
Characteristics: pages 84, 85
Schematics: pages 126, 127
122
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ D-Line Contactors and Starters
Dimensions for Type LC1D Contactors
D-Line Contactors DC Control Circuit or Low Consumption
LC1D09 to D18 (3-pole)
LC1D25 to D38 (3-pole)
Minimum electrical clearance
Minimum electrical clearance
0.39
10
c
1.77
45
0.39
10
c
1.77
45
c1
c2
c3
c1
c2
c3
LC1
D09 to D18
3.03 (77)
D093 to D183
3.89 (99)
D099 to D189
3.30 (80)
D25 to D38
3.34 (85)
D253 and D383
3.89 (99)
b
c
without cover or add-on blocks
with cover, without add-on blocks
with LADN or C (two or four contacts)
with LA6DK10
3.66 (93)
3.66 (93)
3.66 (93)
3.89 (99)
3.89 (99)
3.76 (95)
3.76 (95)
3.76 (95)
3.97 (101)
5.19 (132)
5.66 (144)
5.98 (152)
6.14 (156)
3.97 (101)
5.19 (132)
5.66 (144)
5.98 (152)
6.14 (156)
c1
c2
c3
4.96 (126)
5.43 (138)
5.76 (146)
5.90 (150)
4.96 (126)
5.43 (138)
5.76 (146)
5.76 (146)
4.96 (126)
5.43 (138)
5.76 (146)
5.76 (146)
with LADT, R, S
with LADT, R, S and sealing cover
LC1DT20 to DT60 (4-pole)
Minimum electrical clearance
0.39
10
c
1.77
45
c1
c2
c3
DT20 and DT25
D098 and D128
DT203 and DT253 DT32 to DT40
D0983 and D1283 D188 to D258
DT323 and DT403
D1883 and D2583
LC1
b
3.34 (85)
3.56 (90)
4.84 (123)
5.31 (135)
5.62 (143)
5.78 (147)
3.89 (99)
3.56 (90)
4.84 (123)
5.31 (135)
5.62 (143)
5.78 (147)
3.58 (91)
3.54 (98)
5.15 (131)
5.62 (143)
5.94 (151)
6.10 (155)
4.13 (105)
3.54 (98)
c
with cover
c1
c2
c3
with LADN or C (two or four contacts)
with LA6DK10
5.15 (131)
5.62 (143)
5.94 (151)
6.10 (155)
with LADT, R, S
with LADT, R, S and sealing cover
LC1D40 to D65 (3-pole
LC1D80 and D95 (3-pole)
LP1D65004, LP1D40008 to D65008 (4-pole)
LP1D80004, LP1D80008 (4-pole)
Minimum electrical clearance
Minimum electrical clearance
0.47
12
c
3.35
85
0.47
12
c
3.78
96
c1
c1
c2
c3
c2
c3
LC1
LP1D65004
LP1D40008
and D65008
7.46 (182)
–
LC1
LP1
LP1
D40 to D65
6.73 (171)
6.92 (176)
7.71 (196)
7.95 (202)
8.38 (213)
8.70 (221)
D80 and D95
7.40 (181)
7.32 (186)
8.03 (204)
8.26 (210)
8.70 (221)
9.01 (229)
D80004
7.40 (181)
–
D80008
–
c
without cover or add-on blocks
with cover, without add-on blocks
with LADN (1 contact)
6.73 (171)
–
8.03 (204)
8.26 (210)
8.70 (221)
9.01 (229)
9.17 (233)
c1
7.71 (196)
7.95 (202)
8.38 (213)
8.70 (221)
7.71 (196)
7.95 (202)
8.38 (213)
8.70 (221)
8.03 (204)
8.26 (210)
8.70 (221)
9.01 (229)
with LADN or C (2 or 4 contacts)
with LA6DK10
c2
c3
with LADT, R, S
Selection: pages 92
Characteristics: pages 80 - 87
Schematics: pages 126, 127
123
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ D-Line Contactors and Starters
Mounting Information for Type LC1D and LP1D Contactors
Mounting Information for Type LC1D and LP1D Contactors
xx
On mounting rail AM1DP200, DR200 or AM1DE200 (width 35 mm)
On mounting rail AM1DL200 or DL201 (width 75 mm)
LC1D09 to D38, DT20 to DT60
On mounting rail AM1ED••• or AM1DE200 (width 35 mm)
LC1D40 to D95, LP1D40 to D80
c
c
ac control circuit
LC1
D40 to D65
5.35 (136)
4.96 (126)
4.96 (126)
D80 and D95
5.78 (147)
5.39 (137)
5.39 (137)
DT20 and
DT25
LC1
D09 to D18 D25 to D38
DT32 to DT40
c (AM1DL200) (1)
c (AM1DL201) (1)
c (AM1ED••• or DE200) (1)
b
3.03 (77)
3.46 (88)
3.77 (96)
3.36 (85)
3.70 (94)
4.01 (102)
3.36 (85)
3.70 (94)
4.01 (102)
3.93 (100)
4.29 (109)
4.60 (117)
c (AM1DP200 or DR200) (1)
c (AM1DE200) (1)
dc control circuit
dc control circuit
LC1
D40 to D65
7.59 (193)
7.20 (183)
D80 and D95
7.99 (203)
b
3.03 (77)
3.81 (97)
4.13 (105)
3.36 (85)
4.05 (103)
4.33 (110)
3.70 (94)
4.05 (103)
4.37 (111)
4.29 (109)
4.64 (118)
4.84 (123)
c (AM1DL200) (1)
c (AM1DL201) (1)
c (AM1DP200 or DR200) (1)
c (AM1DE200) (1)
7.99 (203)
LP1
D40
D65
D80
c (AM1DL200)
c (AM1DL201)
7.40 (188)
7.00 (178)
7.40 (188) 7.78 (198)
7.00 (178) 7.78 (198)
(1) with safety cover
(1) with safety cover
On two mounting rails DZ5MB at 120 mm center
LC1D115, D150
ac or dc control circuit
LC1
D115 and D150
134.5
D1156 and D1506
c (AM1DP200 or DR200)
c (AM1DE200 or EDkkk)
117.5
125.5
c
142.5
On two mounting rails DZ5MB at 120 mm center
LC1D40 to D95, LP1D40 to D80
DZ5-ME5
c
15
40
ac control circuit
LC1
D40 to D65
D80 and D95
c with cover
4.70 (119)
5.11 (130)
dc control circuit
LC1
D40 to D65
6.92 (176)
D80 and D95
7.32 (186)
D80
c with cover
LP1
D40 and D65
6.73 (171)
c
7.12 (181)
Selection: pages 88
Characteristics: pages 80 - 87
Schematics: pages 126, 127
124
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ D-Line Contactors and Starters
Mounting Information for Type LC1D and LP1D Contactors
LC1D09 to D38 and LC1DT20 to DT60
On two mounting rails DZ5MB
Control circuit:
ac
dc
LC1
c with cover
G
H
D09 to D18
3.38 (86)
1.37 (35)
2.36 (60)
2.75 (70)
D25 to D38
3.62 (92)
1.37 (35)
2.36 (60)
2.75 (70)
D09 to D18
3.76 (95)
1.37 (35)
2.36 (60)
2.75 (70)
D25 to D38
3.97 (101)
1.37 (35)
2.36 (60)
2.75 (70)
DZ5-ME8
H1
4-pole contactors
DT20 and
DT25
DT20 and
DT25
LC1
DT32 to DT60
DT32 to DT60
c
G
H
3.62 (92)
5.31 (135)
2.36 (60)
2.75 (70)
3.93 (100)
1.57/1.96 (40/50) 1.37 (35)
2.36 (60)
2.75 (70)
3.97 (101)
4.29 (109)
1.37 (35)
2.36 (60)
2.75 (70)
0.6
15
c
G
2.36 (60)
2.75 (70)
H1
LC1D09 to D38 and LC1DT20 to DT60
On pre-slotted mounting plate AM1PA, PB, PC
LC1D40 to D95, LP1D40 to D80
On pre-slotted mounting plate AM1PA, PB, PC
1.58
40
c
c
AF1-EA6
AF1-EA4
G
Control circuit:
LC1
c with cover
G
c with cover
4-pole contactors
ac
dc
D09 to D18
3.38 (86)
1.37 (35)
3.38 (86)
D25 to D38
3.62 (92)
1.37 (35)
3.62 (92)
D09 to D18
3.76 (95)
1.37 (35)
3.74 (95)
D25 to D38
3.97 (101)
1.37 (35)
3.97 (101)
Control circuit:
ac
dc
DT20 and
DT25
DT32 to
DT60
DT20 and
DT25
DT32 to
DT60
LC1
LC1
D40 to D65
D80 and D95
D40 to D65
D80 and D95
c
G
H
3.14 (80)
1.37 (35)
2.36 (60)
3.66 (93)
1.37 (35)
2.36 (60)
4.64 (118)
1.37 (35)
2.36 (60)
5.19 (132)
1.37 (35)
2.36 (60)
c with cover
LP1
c without cover
4.68 (119)
–
–
5.11 (130)
–
–
6.92 (176)
D40 and D65 D80
6.73 (171) 7.12 (181)
7.32 (186)
Note: Units with DC coils have round mounting holes ONLY and are spaced at 70 mm.
LC1D09 to D38 Panel mounted
LC1D40 to D95, LP1D40 to D80 Panel mounted
2xM0.16
q
2xM4
1.38
35
c
=
=
1.57
40
c
=
=
3x¯0.26
3x¯6.5
Control circuit:
LC1
c with cover
ac
dc
D09 to D18
3.38 (86)
D25 to D38
3.62 (92)
D09 to D18
3.76 (95)
D25 to D38
3.97 (101)
Control circuit:
LC1
c with cover
ac
dc
4-pole contactors
D40 to D65
4.68 (119)
D80 and D95
5.11 (130)
D4 to D65
6.92 (176)
D80 and D95
7.92 (186)
DT20 and
DT25
DT32 to
DT60
DT20 and
DT25
DT32 to
DT60
LC1
LP1
–
–
D40 and D65 D80
c with cover
3.54 (90)
3.85 (98)
3.54 (90)
3.85 (98)
c without cover
–
–
6.73 (171)
7.12 (181)
LC1D115, D150
Panel mounted
LC1
D115
D1156
D150
D1506
c
5.19 (132)
4.52 (115)
5.19 (132)
4.52 (115)
3.77/4.33
(96/110)
5.11/5.66
(130/144)
3.77/4.33
(96/110)
5.11/5.66
(130/144)
3.77/4.33
(96/110)
3.77/4.33
(96/110)
G (3-pole)
G (4-pole)
c
=
G
=
–
–
Selection: pages 88
Characteristics: pages 80 - 87
Schematics: pages 126, 127
q
Units with DC coils have round mounting holes ONLY and are spaced at 70 mm.
125
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ D-Line Contactors and Starters
Schematics for Type LC1D Contactors
Schematics for Type LC1D Contactors
3-Pole Contactors
AC Magnetic 3-Pole Contactor with Overload Relay
LC1D09 to D150
L1
L2
L3
13
B
A
M
14
96
98
97
95
T3
T1
T2
4-Pole Contactors
LC1 and LP1
D12004 to D80004
LC1D115004
LC1 and LP1
D12008 to D25008
LC1 and LP1
D40008 to D80008
Front Mounting Add-on Contact Blocks
Instantaneous Auxiliary Contacts
One N.O. LADN10 (1)
One N.C. LADN01 (1)
One N.O. + 1 N.C. LADN11
Two N.O. LADN20
Two N.C. LADN02
Two N.O. + two N.C. LADN22
One N.O. + three N.C. LADN13
Four N.O. LADN40
Four N.C. LADN04
Two N.O. + two N.C. including one N.O. + one N.C. make before break LADC22
Three N.O. + one N.C. LADN31
Front Mounting Add-on Contact Bocks
Instantaneous Auxiliary Contacts Conforming to Standard EN 50012
One N.O. + one N.C. LADN11G One N.O. + one N.C. LADN11P
Two N.O. + two N.C. LADN22G
Two N.O. + two N.C. LADN22P
(1) Items in brackets are for blocks mounted on right-hand side of contactor.
126
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ D-Line Contactors and Starters
Schematics for Type LC1D Contactors
Front Mounting Add-on Contact Blocks
Dust and Damp Protected Instantaneous Auxiliary Contacts
Two N.O. (24-50 V)
LA1DX20
Two N.C. (24-50 V)
LA1DX02
Two N.O. (5-24 V)
LA1DY20
Two N.O. protected (24-50 V)
Two N.O. standard
LA1DZ40
Two N.O. protected (24-50 V)
+ one N.O. + one N.C. standard
LA1DZ31
Front Mounting Add-on Contact Blocks
Time-delay Auxiliary Contacts
On-delay one N.O. + one N.C.
LADT
Off-delay one N.O. + one N.C.
LADR
On-delay N.C. with one N.O. break before make
LADS
Mechanical Latch Blocks
LA6DK10 and LA6DK20
Side Mounting Add-on Contact Blocks
Instantaneous Auxiliary Contacts
One N.O. + one N.C. LAD8N11 (1)
Two N.O. LAD8N20 (1)
Two N.C. LAD8N02 (1)
(1) Items in Brackets are for Blocks Mounted on Right-hand Side of Contactor
Electronic serial timer modules
On-delay LA4DT•U
Auto-Man-Stop modules
LA4DMk (1) PLC
(1)
0
t
Auto/Man
I/O
K
(1) PLC
K
Interface Modules
Relay interface
Relay interface with
Solid state
LA4DF•
LA4DFBQ
override switch LA4DL•
LA4DWB•
K
K
K
K
127
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ D-Line Contactors and Starters
Dimensions for Type LC2D Contactors
Dimensions for Type LC2D Contactors
LC2D09 to D38
LC2DT20 to DT60
2 x LC1D09 to D38
2 x LC1DT20 to DT60
2xM0.16
2xM4
2xM0.16
2xM4
c
=
G
a
c
=
G
a
=
=
LC2 or 2 x LC1
D09 to D18 ac
D093 to D183 ac
D09 to D18 dc
D093 to D183 dc
D12004
a
b
c (1)
e1
0.15 (4) 0.05 (1.5) 3.14 (80)
3.14 (80)
0.15 (4) 0.05 (1.5) 3.14 (80)
e2
G
3.54 (90) 3.03 (77) 3.38 (86)
3.54 (90) 3.89 (99) 3.38 (86)
3.54 (90) 3.03 (77) 3.74 (95)
3.54 (90) 3.89 (99) 3.74 (95)
–
–
–
–
–
3.14 (80)
3.74 (95)
3.14 (80)
–
2.91 (74) 3.14 (80)
0.23 (6)
D25 to D38 ac
3.54 (90) 3.34 (85) 3.62 (92)
3.54 (90) 3.89 (99) 3.62 (92)
0.35 (9) 0.19 (5)
D253 to D383 ac
–
–
3.14 (80)
D25 to D32 dc
D253 to D383 dc
D25004
3.54 (90) 3.34 (85) 3.97 (101)
3.54 (90) 3.89 (99) 3.97 (101)
0.35 (9) 0.19 (5)
3.14 (80)
3.14 (80)
4.37 (111)
LC2 or 2 x LC1
DT20 and DT25
DT32 to DT60
a
b
c
G
–
–
–
3.54 (90) 3.34 (85) 3.54 (90) 3.14 (80)
3.54 (90) 3.58 (91) 3.85 (98) 3.14 (80)
–
3.30 (84) 3.66 (93)
0.22 (7)
e1 and e2: including cabling.
c, e2: including cabling.
(1) With safety cover, without add-on block.
LC2D40 to D65
2 x LC1D40 to D65
2 x LP1D40 and D65
6xØ0.26
6xØ6.5
6xØ0.26
6xØ6.5
G1
=
G1
=
=
=
=
1.57
40
G
a
1.57
40
=
c
=
1.57
40
G
a
1.57
40
=
c
LC2 or 2 x LC1
D40 to D65
a
b
c
e1
e2
–
G
G1
6.49
(165)
0.49
(5)
5.0 (127) 5.6 (142)
5.0 (127) 5.2 (133)
5.0 (127) 5.2 (133)
5.0 (127) 6.2 (158)
5.0 (127) 6.2 (158)
1.96 (50)
3.54 (90)
7.16
(182)
0.78
(11)
D40004
–
–
2.24 (57)
2.24 (57)
2.24 (57)
2.79 (71)
3.81 (97)
3.81 (97)
3.77 (96)
4.37 (111)
7.16
(182)
0.78
(11)
D65004
LC2 or 2 x LC1
D40 to D65
a
b
c
e1
e2
G
G1
7.16
(182)
0.5
(13)
7.16
(182)
2.2
(57)
3.8
(97)
D80 and D95
D80004
–
5.0 (127) 7.4 (190) 1.19 (5) 0.43 (11)
8.14
(207)
1.78
(20)
8.14
(207)
11.0
(127)
0.51
(13)
3.7
(96)
4.3
(111)
–
D80 and D95
8.4 (215)
0.78 (20)
c, e1 and e2: including cabling.
c, e1 and e2: including cabling.
LC2D115 and D150
2 x LC1D115 and D150
=
G
a
=
c
LC2 or 2 x LC1
D115, D150
a
c
e1
5.9 (148) 2.2 (56)
5.9 (148)
e2
G
10.5
(266)
0.7 (18)
9.5/10.0 (242/256)
12.2/12.7 (310/324)
13.1
(334)
D115004
–
2.4 (60)
c, e1 and e2: including cabling.
Selection: pages 93
Characteristics: pages 80, 87
Schematics: pages 129
128
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ D-Line Contactors and Starters
Schematics for Type LC2D Contactors
Schematics for Type LC2D Contactors
xxx
Reversing contactors for motor control, horizontally mounted LC2D09 to D150
Reversing contactors for motor control with integral electrical interlocking (LAD9R1V)
Reversing contactor with overload relay
Changeover contactor pairs, horizontally mounted LC2DT20 to DT60
L1 L2 L3
+
+
+
21
22
21
22
B
F
B
R
A
A
+
97
98
95
96
"C"
T1 T2 T3
Electrical interlocking of contactors using:
mechanical interlock with integral electrical contacts LA9D•••02
Mechanical interlock without integral electrical contacts LA9D•••78, LAD9R1
– KM2
– KM1
01
– KM1
– KM2
02
– KM1
– KM2
– KM1
– KM2
Low speed - High speed cabling kit
LAD- LS/HS
Low speed
High speed
129
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ D-Line Contactors and Starters
LR2 and LR3D 3-pole Bimetallic Overload Relays
LR2 and LR3D 3-pole Bimetallic Overload Relays
Description
D-Line 3-pole thermal overload relays are designed to protect ac circuits and motors against overloads, phase failure, long starting times and prolonged
stalling of the motor.
LRD3322 to 4369, LR2D
LRD01 to 35
1
1
6
5
3
4
37
2
4
5
RESET
STOP
R
E
S
E
T
4 1
4 6
M
A
3
0
1
3.5
2
6
TEST
98
5
3
7
4
NO
NC
97
95
96
1 Adjustment dial Ir
2 Test button
Operation of the Test button allows:
- checking of control circuit wiring,
- simulation of relay tripping (actuates both the N.O. and N.C. contacts).
3 Stop button. Actuates the N.C. contact; does not affect the N.O. contact.
4 Reset button
5 Trip indicator
6 Setting locked by sealing the cover.
7 Selector for manual or automatic reset. Relays LRD01 to LRD35 are supplied with the selector in the manual position, protected by a cover. Deliberate
action is required to move it to the automatic position.
Environment
IEC 60947-1, IEC 60947-4-1, NF C 63-650, VDE 0660,
BS 4941
Conforming to standards
Product certifications
Degree of protection
Protective treatment
CSA, UL, Sichere Trennung, PTB except LAD4: UL, CSA.
Conforming to VDE 0106
Protection against direct finger contact IP 2X
Conforming to IEC 60068
“TH”
Storage
°C
°C
°C
- 60 to + 70 (- 140 to + 158 °F)
Ambient air temperature
around the device
Normal operation, without derating (IEC 60947-4-1)
Minimum and maximum operating temperatures (with derating)
- 20 to + 60 (- 68 to + 140 °F)
- 40 to + 70 (- 104 to + 158 °F)
Operating positions without derating In relation to normal, vertical mounting plane
Any position
Shock resistance
Permissible acceleration conforming to IEC 60068-2-7
Permissible acceleration conforming to IEC 60068-2-6
Conforming to IEC 60255-5
15 gn - 11 ms
Vibration resistance
6 gn
6
Dielectric strength at 50 Hz
Impulse withstand voltage
kV
kV
Conforming to IEC 60801-5
6
Auxiliary Contact Characteristics
Conventional rated thermal current
A
5 Amps AC; 1 Amp DC
ac supply
V
24
48
110
400
220
600
380
600
600
600
Maximum consumption
of operating coils
VA
100
200
of controlled contactors
(Occasional operating
cycles of contact 95-96)
dc supply
V
24
48
110
50
220
45
440
25
–
–
W
A
100
100
Short-circuit protection k
Connection to screw clamp terminals
Flexible cable with cable end
Solid cable without cable end
Flexible cable without cable end
Solid cable without cable end
Tightening torque
By gG, BS or Class CC fuse. Max. rating or by GB2 circuit-breaker
5 maximum
Min - max c.s.a.
18 - 14 (1 - 2.5)
18 - 14 (1 - 2.5)
18 - 14 (1 - 2.5)
18 - 14 (1 - 2.5)
15 (1.7)
One or two conductors
One or two conductors
One or two conductors
One or two conductors
AWG (mm2
AWG (mm2
AWG (mm2
AWG (mm2
lb-in (N.m)
)
)
)
)
k
Select short circuit protection to meet the National Electrical Code or other local codes and standards.
Catalog Numbers: pages 134, 135
Dimensions: pages 138 - 140
130
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ D-Line Contactors and Starters
LR2 and LR3D 3-pole Bimetallic Overload Relays
Electrical Characteristics of Power Circuit
LRD
LR2
LRD
LR2
LRD
LR2
LRD
01 to 16
D15••
21 to 35
D25••
3322 to
33696
D35••
4365 to 4369
Relay type
LR3
LR3
D01 to D16
D21 to D35
LR3
D3322 to
D33696
Tripping class
To UL 508, IEC 60947-4-1
10
20
10
20
10
20
10
Conforming to
IEC 60947-4-1
V
690
690
1000
1000
Rated insulation voltage (Ui)
600 except
LRD4369
Conforming to UL, CSA
V
600
6
600
6
600
6
Rated impulse withstand voltage
(Uimp)
kV
6
Frequency limits
Setting range
Of the operational current
Depending on model
Hz
A
0 to 400
0.1 to 13
0 to 400
12 to 38
0 to 400
0 to 400
17 to 104
80 to 140
Connection to screw clamp terminals
Min - max c.s.a.
14 - 8 (1.5 - 10)
10 - 2 (4 -
35)
Flexible cable without cable end
One conductor
One conductor
One conductor
AWG (mm2
)
)
)
14 - 8 (1.5 - 10)
10 - 1 (4 - 50)
10 - 2 (4 - 35)
16 - 10 (1 - 6) except LRD21: 10 - 2 (4 -
16 - 12 (1 - 4) 35)
Flexible cable with cable end
AWG (mm2
16 - 12 (1 - 4)
14 - 8 (1.5 - 10) except LRD21: 12 - 2 (4 -
Solid cable without cable end
Tightening torque
AWG (mm2
lb-In (N.m)
16 - 10 (1 - 6)
15.0 (1.7)
10 - 1 (4 - 50)
100 lb-in
16 - 10 (1 - 6)
35)
16.4 (1.85) 22.1 (2.5)
100 lb-in
Connection to spring terminals
Flexible cable without cable end
Solid cable without cable end
Min - max c.s.a.
14 - 12 (1.5 - 4)
14 - 12 (1.5 - 4)
One conductor
One conductor
AWG (mm2
AWG (mm2
)
–
–
14 - 12 (1.5 - 4)
–
–
–
–
–
–
–
–
)
14 - 12 (1.5 - 4)
Operating Characteristics
°C
°F
- 20 to + 60
- 68 to + 140
- 30 to + 60
- 86 to + 140
- 30 to + 60
- 86 to + 140
- 20 to + 60
- 68 to + 140
Temperature compensation
Tripping threshold
Sensitivity to phase failure
Tripping curves
Conforming to IEC 60947-4-1
Conforming to IEC 60947-4-1
A
1.14 ± 0.06 In
Tripping current 30% of In on one phase, the others at In
Average operating time
related to multiples of the
current setting
Class 10
Class 20
2
2
Hours
Hours
1
1
40
40
20
20
10
10
Minutes
Minutes
4
2
4
2
1
1
40
40
20
20
10
10
Seconds
Seconds
1
2
3
4
2
4
2
1
2
3
1
1
0.8
0.8
0.8
1
2
4
6
10
1720
0.8
1
2
4
6
10
1720
x times current setting (Ir)
x times current setting (Ir)
1
2
3
Balanced operation, 3-phase, from cold state.
Balanced operation, 2-phase, from cold state.
Balanced operation, 3-phase, after a long period at the set current (hot state).
Catalog Numbers: pages 134, 135
Dimensions: pages 138 - 140
131
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ D-Line Contactors and Starters
LR9D 3-pole Solid-state Overload Relays
LR9D 3-pole Solid-state Overload Relays
Description
LR9D electronic thermal overload relays are designed for use with contactors LC1D115 and D150.
In addition to the protection provided by model d thermal overload relays, (see page 130), they offer the following special features:
k Protection against phase imbalance.
k Choice of starting class.
k Protection of unbalanced circuits.
k Protection of single-phase circuits.
k Alarm function to avoid tripping by load shedding.
LR9D5367 to D5569
LR9D67 and D69
7
8
2
1
2
1 Setting dial Ir
2 Test button
3 Stop button
4 Reset button
5 Trip indication
6 Setting locked by sealing the cover
7 Class 10/class 20 selector
8 Selector for balanced load
unbalanced load
5
4
3
5
4
3
Class Load
Ir(A)
127
Ir(A)
20
10
107
107
127
+
24 V - / 103 104
90
150
NO
90
150
NC
98
97
Alarm
95
96
NO
NC
98
97
95
96
1
6
/
6
Environment
Conforming to standards
Product certifications
Degree of protection
Protective treatment
IEC 60947-4-1, 255-8, 255-17, VDE 0660 and EN 60947-4-1
UL 508, CSA 22-2
Conforming to IEC 60529 and VDE 0106
Standard version
IP 20 on front face with protective covers LA9D11570• or D11560•
“TH”
Storage
°C
- 40 to + 85 (- 104 to + 185 °F)
- 20 to + 55 (1) (- 68 to + 131 °F)
6562 (2000)
Ambient air temperature around the device
(conforming to IEC 60255-8)
Normal operation
°C
Maximum operating altitude
Without derating
ft/m
Operating positions without derating
In relation to normal, vertical mounting plane
Any position
Permissible acceleration conforming to
IEC 60068-2-27
Shock resistance
13 gn - 11 ms
Permissible acceleration conforming to
IEC 60068-2-6
Vibration resistance
2 gn - 5 to 300 Hz
Dielectric strength at 50 Hz
Conforming to IEC 60255-5
Conforming to IEC 61000-4-5
Conforming to IEC 61000-4-2
kV
kV
kV
6
6
8
Impulse withstand voltage
Resistance to electrostatic discharge
Resistance to radio-frequency
conducted disturbances
Conforming to IEC 61000-4-3 and
NF C 46-022
V/m
10
Resistance to fast transient currents
Electromagnetic compatibility
Conforming to IEC 61000-4-4
kV
V
2
Draft EN 50081-1 and 2, EN 50082-2
Meets requirements
Electrical characteristics of auxiliary contacts
Conventional thermal current
A
5
ac supply
Maximum consumption
of operating coils
V
24
48
110
400
110
50
220
600
220
45
380
600
440
25
600
600
–
VA
V
100
24
200
48
of controlled contactors
(Occasional operating cycles of contact 95-96)
dc supply
W
100
100
–
By gG, BS or Class CC fuse or by GB2 circuit-
breaker
Short-circuit protection k
Cabling
A
5
AWG
(mm2
One or two conductors
Minimum c.s.a.: 16 (1) / maximum c.s.a.: 14 (2.5)
)
lb-in
(N.m)
Flexible cable without cable end
Tightening torque
11 (1.2)
(1) For operation at 70 °C (158 °F), please consult your Regional Sales Office.
Select short circuit protection to meet the National Electrical Code or other local codes and standards.
k
Catalog Numbers: pages 135
Dimensions: pages 138
132
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ D-Line Contactors and Starters
LR9D 3-pole Solid-state Overload Relays
Electrical Characteristics of Power Circuit
Relay Type
LR9-D
Conforming to UL 508,
IEC 60947-4-1
Tripping Class
10 or 20
Conforming to IEC 60947-4-1
Rated Insulation Voltage (Ui)
1000 V
600 V
Conforming to UL, CSA
Rated Impulse Withstand Voltage
(Uimp)
8 kV
Frequency Limits
Setting Range
Of the operational current
Depending on model
Width of terminal lug
Clamping screw
50-60 Hz For other frequencies, consult your Regional Sales Office. (1)
60-150 A
0.787 in (20 mm)
M8
Power Circuit Connections
Tightening torque
lb-ft 13 (18 N•m)
Operating Specifications
Temperature Compensation
-20 to +70 °C (- 68 to + 158 °F)
Tripping Threshold
Conforming to IEC 60947-4-1
Alarm
1.05 ± 0.06 In A
Tripping
1.12 ± 0.06 In A
Sensitivity to Phase Failure
Conforming to IEC 60947-4-1
Tripping current 4 s ± 20% in the event of phase failure
Alarm Circuit Specifications
Rated Supply Voltage
Supply Voltage Limits
Current Consumption
Switching Capacity
Protection
dc supply
24 Vdc
17 - 32 V
No load
less than or equal to 5 mA
0 - 150 mA
Short-circuit and overload
Closed state
Self-protected
Voltage Drop
less than or equal to 2.5 V
20 - 16 AWG (0.5 - 1.5 mm2)
4.0 lb-in (0.45 N•m)
Cabling
Flexible cable without cable end
Tightening Torque
Tripping Curve LR9-D
Average Operating Time Related to Multiples of the Current Setting
Tripping time in seconds
000
100
1
2
10
1
0
1 1.12
2
3
4
5
6
7
8
9
10
11
12
x the current setting (ir)
1
2
Cold state curve.
Hot state curve.
(1) For use of these relays with soft start units or variable speed controllers, please consult your Regional Sales Office.
Catalog Numbers: pages 135
Dimensions: pages 138
133
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ D-Line Contactors and Starters
Selection of 3-pole Class 10 Bimetallic Overload Relays
Selection of 3-pole Class 10 Bimetallic Overload Relays
Differential (Single Phase Sensitive) Thermal Overload Relays
Compensated Relays with Manual or Automatic Reset, with Relay Trip Indicator, for ac or dc.
By Circuit Breaker
Short-circuit Protection for North American Applications
By Fuses
Select in Accordance with NEC and Local Codes
Maximum 400% of Motor FLA
Fuses to be used with Selected Relay
For use with
Contactor LC1-
Relay Setting Range
Catalog Number
Weight lb. (kg)
aM
gG
BS88
A
A
A
A
Class 10 with Connection by Screw Clamp Terminals
0.10 to 0.16
0.16 to 0.25
0.25 to 0.40
0.40 to 0.63
0.63 to 1
1 to 1.6
0.25
0.5
1
2
–
D09 to D38 (2)
D09 to D38 (2)
D09 to D38 (2)
D09 to D38 (2)
D09 to D38 (2)
D09 to D38 (2)
D09 to D38 (2)
D09 to D38 (2)
D09 to D38 (2)
D09 to D38 (2)
D09 to D38 (2)
D12 to D38 (2)
D18 to D38 (2)
D25 to D38 (2)
D25 to D38 (2)
D32 and D38 (2)
D40 to D95
LRD01
0.27 (0.124)
0.27 (0.124)
0.27 (0.124)
0.27 (0.124)
0.27 (0.124)
0.27 (0.124)
0.27 (0.124)
0.27 (0.124)
0.27 (0.124)
0.27 (0.124)
0.27 (0.124)
0.27 (0.124)
0.27 (0.124)
0.27 (0.124)
0.27 (0.124)
0.27 (0.124)
1.12 (0.510)
1.12 (0.510)
1.12 (0.510)
1.12 (0.510)
1.12 (0.510)
1.12 (0.510)
1.12 (0.510)
1.12 (0.510)
1.98 (0.900)
1.98 (0.900)
1.98 (0.900)
2.20 (1.000)
2.20 (1.000)
2.20 (1.000)
2
–
LRD02
LRD08
2
–
LRD03
1
2
–
LRD04
2
4
–
LRD05
2
4
6
LRD06
1.6 to 2.5
2.5 to 4
4
6
10
16
16
20
20
25
32
50
63
80
50
63
80
100
100
125
125
160
160
200
200
160
200
200
LRD07
6
10
16
20
20
25
35
50
63
80
50
63
100
100
100
125
125
160
200
200
250
160
200
250
LRD08
4 to 6
8
LRD10
5.5 to 8
12
12
16
20
25
40
50
25
40
40
63
63
80
80
100
125
125
160
100
125
160
LRD12
7 to 10
LRD14
9 to 13
LRD16
12 to 18
16 to 24
23 to 32
30 to 38
17 to 25
23 to 32
30 to 40
37 to 50
48 to 65
55 to 70
63 to 80
80 to 104
80 to 104
95 to 120
110 to 140
80 to 104
95 to 120
110 to 140
LRD21
LRD22
LRD21
LRD32
LRD35
LRD3322
LRD3353
LRD3355
LRD3357
LRD3359
LRD3361
LRD3363
LRD3365
LRD4365
LRD4367
LRD4369
LRD33656 (1)
LRD33676 (1)
LRD33696 (1)
D40 to D95
D40 to D95
D40 to D95
D50 to D95
D50 to D95
D65 to D95
D80 and D95
D115 and D150
D115 and D150
D150
D115 and D150
D115 and D150
D115 and D150
LRD33
Class 10 with Spring Terminal Connections (for direct mounting on the contactor only)
0.10 to 0.16
0.16 to 0.25
0.25 to 0.40
0.40 to 0.63
0.63 to 1
1 to 1.6
0.25
0.5
1
2
–
D09 to D38 (2)
D09 to D38 (2)
D09 to D38 (2)
D09 to D38 (2)
D09 to D38 (2)
D09 to D38 (2)
D09 to D38 (2)
D09 to D38 (2)
D09 to D38 (2)
D09 to D38 (2)
D09 to D38 (2)
D12 to D38 (2)
D18 to D38 (2)
D25 to D38 (2)
LRD013
LRD023
LRD033
LRD043
LRD053
LRD063
LRD073
LRD083
LRD103
LRD123
LRD143
LRD163
LRD213
LRD223
6.31 (0.140)
6.31 (0.140)
6.31 (0.140)
6.31 (0.140)
6.31 (0.140)
6.31 (0.140)
6.31 (0.140)
6.31 (0.140)
6.31 (0.140)
6.31 (0.140)
6.31 (0.140)
6.31 (0.140)
6.31 (0.140)
6.31 (0.140)
2
–
2
–
1
2
–
2
4
–
2
4
6
1.6 to 2.5
2.5 to 4
4
6
10
16
16
20
20
25
32
50
6
10
16
20
20
25
35
50
4 to 6
8
5.5 to 8
12
12
16
20
25
7 to 10
9 to 13
LRD083
12 to 18
16 to 24
Class 10 with Ring-Tongue Terminals for LRD01 through LRD35 (load side terminals only)
Select the appropriate overload relay with screw clamp terminals from the table above and add 6 to the end of the reference.
Example: LRD01 becomes LRD016.
Thermal Overload Relays for use on single phase loads
Class 10 with connection by screw clamp terminals
Change the prefix in the references above from LRD (except LRD4kkk) to LR3D. Example: LRD01 becomes LR3D01.
Thermal Overload Relays for use on 1000 V Supplies
Class 10 with connection by screw clamp terminals
For relays LRD-01 to LRD-35 only, for an operating voltage of 1000 V, and only for independent mounting, the reference becomes LRD33 A66. Example:
LRD12 becomes LRD3312A66.
Order an LA7D3064 terminal block separately; see page 137.
(1) These are special separate mounted versions of the LRD43 overload relays for the LC1D115 and D150 contactors. Part number includes overload
relay, terminal block and 6 connectors (unit is not UL/CSA approved).
(2) When used with D25-D38 contactors, order spacer clip (part number W816366180111). See page 137.
134
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ D-Line Contactors and Starters
Selection of 3-pole Class 20 Bimetallic and Class 10 Solid-state Overload Relays
Selection of 3-pole Class 20 Bimetallic and Class 10 Solid-state Overload Relays
Differential (Single Phase Sensitive) Thermal Overload Relays
Compensated relays with manual or automatic reset, with relay trip indicator, for ac or dc
LR2-D1508 to 2553: independent mounting either by ordering a terminal block LA7D1064 or LA7D2064, or by ordering the relay pre-assembled; in this
case, add the suffix LA7 to the reference.
Example: LR2D1508 becomes LR2D1508LA7.
By Circuit Breaker
By Fuses
Select in Accordance with NEC and Local Codes
Maximum 400% of Motor FLA
Short-circuit Protection for North American Applications
Fuses to be used with
For use with Contactor
LC1
Relay Setting
Range
the Selected Relay
Catalog Number
Weight lb. (kg)
aM
gG
BS88
A
A
A
A
Class 20 for Connection by Screw Clamp Terminals
2.5 to 4
4 to 6
6
10
16
D09 to D38 (2)
D09 to D38 (2)
D09 to D38 (2)
D09 to D38 (2)
D12 to D38 (2)
D18 to D38 (2)
D25 and D38 (2)
D25 and D38 (2)
D25 and D38 (2)
D40 to D95
LRD1508 (3)
LRD1510 (3)
LRD1512 (3)
LRD1514 (3)
LRD1516 (3)
LRD1521 (3)
LRD1522 (3)
LRD1530 (3)
LRD1532 (3)
LRD3522
0.42 (0.190)
0.42 (0.190)
0.42 (0.190)
0.42 (0.190)
0.42 (0.190)
0.42 (0.190)
0.42 (0.190)
0.76 (0.345)
0.76 (0.345)
1.18 (0.535)
1.18 (0.535)
1.18 (0.535)
1.18 (0.535)
1.18 (0.535)
1.18 (0.535)
1.18 (0.535)
8
16
16
5.5 to 8
7 to 10
12
16
16
25
32
40
40
32
40
50
63
80
100
100
20
20
20
25
9 to 13
25
25
12 to 18
17 to 25
23 to 28
25 to 32
17 to 25
23 to 32
30 to 40
37 to 50
48 to 65
55 to 70
63 to 80
35
40
50
50
63
63
63
63
LRD15
50
50
63
63
D40 to D95
LR2D3553
100
100
125
125
160
80
D40 to D95
LR2D3555
100
100
125
125
D50 to D95
LR2D3557
D50 to D95
LR2D3559
D65 to D95
LR2D3561
D80 and D95
LR2D3563
Solid-state Differential Thermal Overload Relays
Compensated relays, with relay trip indicator, for ac or dc, for direct mounting on contactor or independent mounting (1).
Fuses to be used with Selected Relay (4)
Relay Setting
Range
For Direct Mounting
Beneath Contactor LC1
Catalog Number
Weight lb. (kg)
aM
gG
A
A
A
Class 10 for Connection using Bars or Connectors
60 to 100
90 to 150
100
160
160
250
D115 and D150
D115 and D150
LR9D5367
LR9D5369
1.95 (0.885)
1.95 (0.885)
Class 20 for Connection using Bars or Connectors
60 to 100
90 to 150
125
200
160
250
D115 and D150
D115 and D150
LR9D5567
LR9D5569
1.95 (0.885)
1.95 (0.885)
Solid-state Thermal Overload Relays for use with Balanced/Unbalanced Loads (Single Phase)
Compensated relays, with separate outputs for alarm and tripping.
Fuses to be used with Selected Relay (4)
Relay Setting
Range
For Direct Mounting
Beneath Contactor LC1
Catalog Number
Weight lb. (kg)
aM
gG
LR2D35
A
A
A
Class 10 or 20 Selectable with Connection using Bars or Connectors
60 to 100
90 to 150
100
160
160
250
D115 and D150
D115 and D150
LR9D67
LR9D69
1.98 (0.900)
1.98 (0.900)
(1) Power terminals can be protected against direct finger contact by the addition of shrouds and/or insulated terminal blocks, to be ordered separately
(see page 113).
(2) For use with D25-D38 contactors, order spacer clip (part number W816366180111). See page 137.
(3) These overloads are available without single phase sensitivity. To order, change the LRD prefix to LR3D and add A1 to the end of the number.
Example: LRD1508 becomes LR3D1508A1
(4) Select short circuit protection to meet the National Electrical Code or other local codes and standards.
Other Versions
Thermal overload relays for resistive circuits in category AC-1. Please consult your Regional Sales Office.
135
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ D-Line Contactors and Starters
Selection of Overload Relay Accessories
Selection of Overload Relay Accessories
LAD-7B10
LAD-7305
LA7-D305
LRD-
LAD-703
LRD-
LA7-D1064
LRD-3
LA7-D03
DX1-AP25
LA7-D03
LR2-D15
LRD-
LA7-D2064
LA7-D901
DX1-AP26
LRD-3
LR2-D
LA7-D1020
LR2-D25
LA7-D3064
XB5-AL84101
LA7-D902
LA7-D1020
XB5-AA86102
LRD-3
LR2-D35
136
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ D-Line Contactors and Starters
Selection of Overload Relay Accessories
Accessories (to be ordered separately)
Sold in
Lots of:
Description
For use on:
Catalog Number
Weight lb. (kg)
Pre-wiring kit allowing direct connection of the N.C. LC1D09 to D18
10
LAD7C1
LAD7C2
0.002 (0.004)
0.003 (0.007)
contact of relay LRD01 to 35 or LR3D01 to D35 to
LC1D25 to D38
10
the contactor
Separate Mount Kits
LRD01 to 35 and LR3D01 to D35
LRD15kk
1
1
1
1
1
LAD7B10
0.100 (0.22)
0.100 (0.22)
0.100 (0.22)
0.120 (0.26)
0.370 (0.82)
LAD7B105
LA7D1064
LA7D2064
LA7D3064 (2)
Terminal blocks (1) for separate mounting on 35
mm rail (AM1DP200) or screw mounting; for
mounting centers, see pages 138 to 140.
LR2D15kk
LR2D25kk
LRD3kkk, LR3D3kkk, LR2D35kk
Terminal block adapter for mounting a relay
beneath an LC1D115 or D150 contactor
LRD3kkk, LR3D3kkk, LRD35kk
1
LA7D3058
0.080 (0.18)
LRD01 to 35, LR3D01 to D35. LR2D15kk
LR2D25kk
10
10
1
DX1AP25
DX1AP26
LA7D902
0.065 (0.14)
0.082 (0.18)
0.130 (0.29)
Mounting plates (3) for screw mounting on 110 mm
center
LRD3kkk, LR3D3kkk, LR2D35kk
LAD7C
All relays except LRD01 to 35
and LR3D01 to D35 (4)
Marker holder snap in
100
1
LA7D903
0.001 (0.002)
0.001 (0.002)
0.005 (0.01)
0.090 (0.20)
0.090 (0.20)
0.560 (1.23)
0.050 (0.023)
Bag of 400 labels (blank, self-adhesive, 7 x 16 mm)
Stop button locking device
–
LA9D91
All relays except LRD01 to 35.
LR3D01 to D35 and LR9D
10
1
LA7D901
Remote stop or electrical reset device (5)
Remote tripping or electrical reset device (5)
Block of insulated terminals
LRD01 to 35 and LR3D01 to D35
LAD703• (6)
LA7D03• (6)
LA9F103
All relays except LRD01 to 35
and LR3D01 to D35
1
LR9D
2
Mounting small overload relays to LC1D25 and
LC1D32
Spacer
10
W816366180111
Remote Control
“Reset” Function
LRD01 to 35 and LR3D01 to D35
1
1
LAD7305
LA7D305
0.075 (0.17)
0.075 (0.17)
By flexible cable
(length = 0.5 m / 1.64 ft.)
LAD7B10
All relays except LRD01 to 35
and LR3D01 to D35
“Stop” and/or “Reset” Functions
The terminal protection shroud must be removed and the following three products must be ordered separately.
All relays except LRD01 to 35
Adapter for door interlock mechanism
1
LA7D1020
0.005 (0.01)
and LR3D01 to D35
Stop
All relays
All relays
1
1
XB5AL84101
XB5AA86102
0.027 (0.06)
0.027 (0.06)
Operating head for spring return push button
Reset
(1) Terminal blocks are supplied with terminals protected against direct finger contact and screws in the open, “ready-to-tighten” position.
(2) To order a terminal block (separate mount kit) with ring-tongue terminals, the catalog number becomes LA7D30646.
(3) Requires separate mount terminal block corresponding to the type of relay.
(4) For LRD01 to 35 (see page 114).
(5) The time for which the coil of remote tripping or electrical resetting device LA7D03 or LAD703 can remain energized depends on its rest time: 1 s
pulse duration with 9 s rest time; 5 s pulse duration with 30 s rest time; 10 s pulse duration with 90 s rest time; maximum pulse duration of 20 s
with a rest time of 300 s. Minimum pulse time: 200 ms.
(6) Reference to be completed by adding the code indicating control circuit voltage. Standard control circuit voltages (for other voltages, please consult
your Regional Sales Office).
Volts
12
24
48
96
110
220/230
380/400
415/440
50/60 Hz
–
B
E
–
F
M
Q
N
Overload Relay and
Spacer
(W816366180111)
Consumption, inrush and sealed: < 100 VA
dc
Consumption, inrush and sealed: < 100 W.
J
B
E
DD
F
M
–
–
137
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ D-Line Contactors and Starters
Dimensions for 3-pole Bi-metalic and Solid-state Overload Relays
Dimensions for 3-pole Bi-metallic and Solid-state Overload Relays
D-Line Thermal Overload Relays
LRD-01-35
LRD-013-353
Direct mounting beneath contactors with screw
Direct mounting beneath contactors with spring terminal connections
Dual Dimensions: Inches
mm
LC1•
D09 - D18
D25 - D38
LC1•
D093 - 383
b
4.84 (123)
5.39 (137)
b
c
4.84 (123)
c
See pages 122, 123.
See pages 122, 123.
LRD-3•••
Direct mounting beneath contactors
LC1-D40 to D95 and LP1-D40 to D80
AM1•
DL201
DL200
d
0.28 (7)
0.67 (17)
b
c
e
g(3P)
g(4P)
ac control circuit:
LC1D40
4.37 (111)
4.37 (111)
4.37 (111)
4.69 (119) 2.85 (72.4) 0.18 (4.5) 0.51 (13)
4.69 (119) 2.85 (72.4) 0.18 (4.5)
4.69 (119) 2.85 (72.4) 0.18 (4.5) 0.51 (13)
LC1D50
-
LC1D65
LC1D80
4.55 (115.5) 4.88 (124) 3.03 (76.9) 0.37 (9.5) 0.87 (22)
4.55 (115.5) 4.88 (124) 3.03 (76.9) 0.37 (9.5)
LC1D95
-
dc control circuit:
LC1D40, LP1D40
LC1D50
4.37 (111)
4.37 (111)
4.37 (111)
6.93 (176) 2.85 (72.4) 0.18 (4.5) 0.51(13)
6.93 (176) 2.85 (72.4) 0.18 (4.5)
6.93 (176) 2.85 (72.4) 0.18 (4.5) 0.51(13)
-
LC1D65, LP1D65
LC1D80, D95, LP1D80 4.55 (115.5) 7.06 (179.4) 3.03 (76.9) 0.37 (9.5) 0.87(22)
LRD4•••
LR9D
Direct mounting beneath contactors
LC1D115 and D150
Direct mounting beneath contactors
LC1D115 and D150
AM1DL200 and DR200
0.10 (2.5)
AM1DE200 and ED•••
0.41 (10.5)
AM1DP200 and DR200
0.10 (2.5)
AM1DE200 and ED•••
0.41 (10.5)
d
d
Characteristics: pages 130 - 133
Catalog Number: pages 134, 135
138
© 2001-2004 Schneider Electric All Rights Reserved
08/04
TeSys™ D-Line Contactors and Starters
Mounting Information for Bimetallic and Solid-state Overload Relays
Mounting Information for Bimetallic and Solid-state Overload Relays
D-Line Thermal Overload Relays
LRD-01-35
Independent mounting on 50 mm centers or on rail AM1DP200 or DE200
Independent mounting on 110 mm centers
1.81
LAD-7B10
1.38 0.39
35
10
46
=
=
LAD-7B10
3.15
80
0.08
2
1.77
45
DX1-AP25 2xØ0.26
2xØ6.5
3.54
90
Remote tripping or electrical reset
LAD-703 (1)
Dual Dimensions: Inches
mm
1.26
32
(1) Can only be mounted on RH side of relay LRD-01 to 35
LRD15••
Independent mounting on 50 mm centers or on rail AM1DP200 or DE200
Remote tripping or electrical reset
1.77
45
LA7-D1064
=
=
LA7-D03(1)
1.38
35
3.78
96
1.34
34
d
2xØ0.18
2xØ4.5
3.86
98
0.31
8
0.67
17
AM1DP200
AM1DE200
0.37 (9.5)
d
0.08 (2)
(1) Can be mounted on RH or LH side of relay LR2D15••
LR2D25••
Independent mounting on 50 mm centers or on rail AM1DP200 or DE200
Remote tripping or electrical reset
2.17
55
1.57
40
LA7-D2064
=
=
LA7-D03 (1)
3.78
96
1.14
29
3.86
98
d
0.51
13
2xØ0.18
2xØ4.5
0.87
22
AM1DP200
AM1DE200
0.37 (9.5)
d
0.08 (2)
(1) Can be mounted on RH or LH side of relay LR2D25••
Characteristics: pages 130 - 133
Catalog Number: pages 134, 135
139
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ D-Line Contactors and Starters
Mounting Information for Bimetallic and Solid-state Overload Relays
D-Line Thermal Overload Relays
LRD3••• and LR2D35••
LRD3•••, LR2D35•• and LR9D
Independent mounting on 50 mm centers or on rail AM1DP200 or DE200
Remote tripping or electrical reset
2.95
75
LA7-D03 (1)
LA7-D3064
=
1.97
50
=
4.69
119
0.83
21
d
2x¯0.18
2x¯4.5
0.93
23.5
4.76
121
1.26
32
AM1DP200
AM1DE200
d
0.08 (2)
0.37 (9.5)
(1) Can be mounted on RH or LH side of relay LR23•••, LR2D35•• or LR9D
LR2D and LRD3•••
Adapter for door interlock mechanism LA7D1020
Stop
Reset
c
0.39
10
LA7-D1020
c: adjustable from 0.67 to 4.72 in. (17 to 120 mm)
LRD, LR2D and LR9D
“Reset” by flexible cable LA7D305 and LAD7305
Mounting with cable straight
Mounting with cable bent
e
c
e
M10x0.04
M10x1
c: up to 21.6in (550 mm)
e: up to.79in (20 mm)
e: up to 0.79in (20 mm)
Characteristics: pages 130 - 133
Catalog Number: pages 134, 135
140
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ D-Line Contactors and Starters
Capacitor-switching Contactors (International Applications Only)
Capacitor-switching Contactors (International Applications Only)
For Switching 3-phase Capacitor Banks used for Power Factor Correction - Selection
Standard Contactors
Capacitors, together with the circuits to which they are connected, form oscillatory circuits which can, at the moment of switch-on, give rise to high
transient currents (> 180 In) at high frequencies (1 to 15 kHz).
As a general rule, the peak current on energizing is lower when:
- the mains inductances are high,
- the line transformer ratings are low,
- the transformer short-circuit voltage is high,
- the ratio between the sum of the ratings of the capacitors already switched into the circuit and that of the capacitors to be switched in is small (for multiple
step capacitor banks).
In accordance with standards IEC 60070, NF C 54-100, VDE 0560, the switching contactor must be able to withstand a continuous current of 1.43 times
the rated current of the capacitor bank step being switched.
The rated operational powers given in the tables opposite take this overload into account.
Short-circuit protection is normally provided by gL type HPC fuses rated at 1.7 to 2 In.
Contactor Applications
Operating Conditions
Capacitors are directly switched. The values of peak current at switch-on must not exceed the values indicated opposite.
An inductor may be inserted in each of the three phases supplying the capacitors to reduce the peak current, if necessary. Inductance values are
determined according to the selected operating temperature.
Power factor correction by a single-step capacitor bank
The use of a choke inductor is unnecessary; the inductance of the mains supply is adequate to limit the peak to a value compatible with the contactor
characteristics.
Power factor correction by a multiple-step capacitor bank
Select a special contactor as defined on page 142.
If a standard contactor is used, it is essential to insert a choke inductor in each of the three phases of each step.
Maximum operational power of contactors
Standard Contactors
Maximum operating rate: 120 operating cycles/hour.
Electrical durability at maximum load: 100,000 operating cycles.
With choke inductors connected, where necessary.
Operational power at 50/60 Hz
θ ≤ 40 °C / 104 °F (1)
θ ≤ 55 °C / 131 °F (1)
Maximum Peak
Current
Contactor Size
220 V
240 V
kVAR
6
400 V
440 V
kVAR
11
600 V
690 V
kVAR
15
220 V
240 V
kVAR
6
400 V
440 V
kVAR
11
600 V
690 V
kVAR
15
A
560
LC1D09, D12
LC1D18
9
15
20
9
15
20
850
11
20
25
11
20
25
1600
1900
2160
2160
3040
3040
3100
3300
3500
4000
5000
6500
8000
10 000
12 000
14 200
LC1D25
14
25
30
14
25
30
LC1D32, D38
LC1D40
17
30
37
17
30
37
22
40
50
22
40
50
LC1D50
22
40
50
22
40
50
LC1D65
35
60
75
35
60
75
LC1D80, D95
LC1D115
LC1D150
LC1F185
LC1F225
LC1F265
LC1F330
LC1F400
LC1F500
LC1F630
LC1F800
50
90
125
135
160
190
225
275
300
400
600
600
38
75
80
60
110
125
140
160
190
220
300
400
400
40
85
90
70
50
100
110
125
140
160
220
350
350
100
110
125
165
200
300
500
500
80
60
90
75
100
125
180
250
250
85
100
125
190
190
(1) Upper limit of temperature category conforming to IEC 70.
141
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ D-Line Contactors and Starters
Capacitor-switching Contactors (International Applications Only)
For Switching 3-phase Capacitor Banks, used for Power Factor Correction
Direct Connection without Choke Inductors - References
Special Contactors
Special contactors LC1DkK are designed for switching 3-phase, single or multiple-step capacitor banks; they conform to standards IEC 60070 and
60831, NFC 54-100, VDE 0560, UL and CSA.
Contactor Applications
Specification
Contactors fitted with a block of early make poles and damping resistors, limiting the value of the current on closing to 60 In max.
This current limitation increases the life of all the components of the installation, in particular that of the fuses and capacitors.
The patented design of the add-on block (No. 90 119-20) ensures safety and long life of the installation.
Operating Conditions
There is no need to use choke inductors for either single or multiple-step capacitor banks.
Short-circuit protection must be provided by gI type fuses rated at 1.7 to 2 In.
Maximum Operational Power
LC1DFK11••
The power values given in the selection table below are for the following operating conditions.
Prospective Peak Current at Switch-on LC1D•K
200 In
LC1DFK, DGK, DLK, DMK, DPK
240 operating cycles/hour
100 operating cycles/hour
300,000 operating cycles
200,000 operating cycles
Maximum Operating Rate
LC1DTK, DWK
400 V
690 V
Electrical Durability at Nominal Load
All Contactor Ratings
Operational Power at 50/60 Hz (1)
Instantaneous
Auxiliary
Contacts
θ ≤ 55 °C / 131 °F (3)
Basic Reference.
Complete with Code
Indicating Control Circuit
Voltage (2)
Tightening
Torque on
Cable End
220 V
400 V
660 V
690 V
Weight lb. (kg)
240 V
440 V
kVAR
kVAR
kVAR
N.O.
1
N.C.
1
lb-in (N.m)
11 (1.2)
11 (1.2)
15 (1.7)
15 (1.7)
17 (1.9)
17 (1.9)
22 (2.5)
22 (2.5)
44 (5)
LC1DFK11••
LC1DFK02••
LC1DGK11••
LC1DGK02••
LC1DLK11••
LC1DLK02••
LC1DMK11••
LC1DMK02••
LC1DPK12••
LC1DTK12••
LC1DWK12••
0.94 (0.430)
0.94 (0.430)
0.99 (0.450)
0.99 (0.450)
1.3 (0.600)
1.3 (0.600)
1.4 (0.630)
1.4 (0.630)
2.9 (1.300)
2.9 (1.300)
3.6 (1.650)
6.7
12.5
18
–
2
1
1
8.5
10
15
16.7
20
24
30
36
–
2
1
1
–
2
1
1
25
–
2
20
25
40
33.3
40
48
58
92
1
2
LC1DPK12••
1
2
44 (5)
60
1
2
80 (9)
Switching of multiple step capacitor banks (with equal or different power ratings).
The correct contactor for each step is selected from the above table, according to the power rating of the step to be switched.
Example: 50 kVAR 3-step capacitor bank. Temperature 50 °C (122 °F) and U = 400 V or 440 V.
One 25 kVAR step: contactor LC1-DMK, one 15 kVAR step: contactor LC1-DGK and one 10 kVAR step: contactor LC1-DFK.
(1) Operational power of the contactor according to the schematic on page 143.
(2) Standard control circuit voltages.
Volts
24
42
48
110
115
220
230
240
380
400
415
440
R7
50/60 Hz
B7
D7
E7
F7
FE7
M7
P7
U7
Q7
V7
N7
For other voltages between 24 and 440 V, please consult your Regional Sales Office
(3) The average temperature over a 24-hour period, in accordance with standards IEC 60070 and 60831, is 45 °C (113 °F).
142
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ D-Line Contactors and Starters
Capacitor-switching Contactors (International Applications Only)
For Switching 3-phase Capacitor Banks, used for Power Factor Correction
Dimensions, Schematics - References
zzz
Dimensions
LC1DFK, DGK
LC1DPK, DTK
c
1.77
45
5.91
150
2.95
75
LC1
DFK
DGK
c
Type of Mounting
LC1D12
LC1
DPK
DTK
Type of Mounting
LC1D40
117
122
See pages 124, 125
See pages 124, 125
See pages 124, 125
See pages 124, 125
LC1D18
LC1D50
LC1DWK
LC1DLK, DMK
c
2.20
56
6.18
157
3.35
85
LC1
DLK
DMK
c
Type of Mounting
LC1D25
LC1
Type of Mounting
LC1D80
117
122
See pages 124, 125
See pages 124, 125
DWK
See pages 124, 125
LC1D32
Schematics
LC1D•K
Ð R
Ð R
Cabling (maximum permissible c.s.a.)
R = Pre-wired resistor connections
Contactor type LC1
DFK
DGK
DLK
1
DMK
DPK, DTK
DWK
Number of conductors
1
2
1
2
2
1
2
1
2
1
2
Flexible cable with cable end AWG (mm2) 14 (2.5) 16 (1.5) 12 (4)
Solid cable without cable end AWG (mm2) 12 (4)
12 (4) 10 (6)
14 (2.5)
10 (6)
12 (4)
8 (10)
12 (4)
10 (6)
10 (6)
6 (16)
12 (4)
8 (10)
6 (16)
4 (25)
10 (6)
6 (16)
1 (50)
1 (50)
4 (25)
2 (35)
143
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ D-Line Contactors and Starters
Plate-mounted Starters LC4D (International Applications Only)
Plate-mounted Starters LC4D (International Applications Only)
AC D.O.L. Starters, Plate Mounted, for Motor Control
4 to 37 kW, (1), with Isolating Device, Pre-Assembled - References
Utilization Category ac-3
Operational Fuses to be Fitted by the
Standard Power Ratings of 3-phase Motors
50/60 Hz
Current
Customer
Basic Reference.
Complete with Code
Indicating Control Circuit
Voltage (2)
Weight lb (kg)
220 V
230 V
kW
2.2
3
380 V
660 V 440 V
690 V up to
Size
Type aM
400 V 415 V 440 V
500 V
kW
5.5
7.5
10
kW
4
kW
4
kW
4
kW
–
A
A
9
10 x 38
10 x 38
10 x 38
10 x 38
14 x 51
14 x 51
22 x 58
22 x 58
22 x 58
12
16
20
25
32
40
63
80
80
LC4D09A••
LC4D12A••
LC4D18A••
LC4D25A••
LC4D32A••
LC4D40••
LC4D50••
LC4D65••
LC4D80••
1.9 (0.870)
1.9 (0.870)
2.5 (1.150)
3.5 (1.580)
5.8 (2.630)
6.5 (2.930)
7.0 (3.200)
7.4 (3.340)
8.0 (3.650)
5.5
7.5
11
5.5
9
5.5
9
–
12
18
25
32
40
50
65
80
4
–
5.5
7.5
11
11
15
22
25
37
45
11
15
22
30
37
45
15
–
15
18.5
22
18.5
30
33
37
45
18.5
22
15
30
LC4D09A••
18.5
22
30
37
37
55
Specifications
Pre-wired power and control circuit connections.
3-pole isolating device
(1) Thermal overload relay to be ordered separately (see pages 134, 135).
(2) Standard control circuit voltages.
Volts
24
42
48
110
220
230
240
380
400
415
N7
440
50/60 Hz
B7
D7
E7
F7
M7
P7
U7
Q7
V7
R7
For other voltages, please consult your Regional Sales Office.
144
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ D-Line Contactors and Starters
Plate-mounted Starters LC4D (International Applications Only)
D.O.L. Starters, Plate Mounted, for Motor Control
4 to 37 kW, with Isolating Device, Pre-assembled - Dimensions, Schematics
z
Dimensions
D.O.L. Starters
Plate Mounted, Pre-assembled
LC4D09 to D25A
LC4D32A
4.69
119
3.94
100
0.17
4.2
0.24
6.2
c1
3.46
88
c1
=
2.17
55
=
=
=
=
3.54
90
6.50
165
=
2.80
71
3.39
86
LC4
b
D09A to D18A
8.58 (218)
3.70 (94)
3.77 (96)
5.0 (127)
5.47 (139)
5.78 (147)
5.94 (151)
D25A
LC4
D32A
8.70 (221)
3.93 (100)
4.01 (102)
5.23 (133)
5.70 (145)
6.02 (153)
6.18 (157)
c1 without cover or add-on blocks
with cover, without add-on block
with LADN or C (two or four contacts)
with LA6DK10
3.93 (100)
4.01 (102)
5.23 (133)
5.70 (145)
6.02 (153)
6.18 (157)
c1 without cover or add-on blocks
with cover, without add-on block
with LADN or C (two or four contacts)
with LA6DK10
with LADT, R, S
with LADT, R, S
with LADT, R, S and sealing cover
with LADT, R, S and sealing cover
LC4-D40 to D80
c
=
G
=
c1
c2
a
LC4
D40 to D65
11.0 (281)
5.6 (143)
5.1 (130)
4.8 (124)
5.2 (129)
6.1 (149)
6.4 (157)
6.6 (169)
6.9 (177)
7.12 (181)
3.9 (100)
D80
a
b
c
12.2 (311)
5.6 (143)
5.5 (140)
5.3 (135)
5.5 (140)
6.3 (160)
6.6 (168)
7.0 (180)
7.4 (188)
7.5 (192)
7.0 (178)
c1 without cover or add-on blocks
with cover, without add-on block
with LA1-DN (one contact)
with LAD-N or C (two or four contacts)
with LA6-DK
with LAD-T, R, S
with LAD-T, R, S and sealing cover
c2
D.O.L. Starters
LC4-D09A to D80
- Q1
- KM1
145
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ D-Line Contactors and Starters
AC Wye-delta Starters LC3D (International Applications Only)
AC Wye-delta Starters LC3D (International Applications Only)
5.5 to 132 kW, (1), without Isolating Device, Pre-assembled - References
NOTE: Wiring methods differ from typical North American practice.
Contains UL listed, CSA certified, CE marked components.
Assemblies are not UL Listed or CSA Certified.
Auxiliary Contacts Available on Each
Contactor
Standard Power Ratings
of Squirrel Cage Motors
line
delta
KM3
star
Catalog Number
KM2
KM1
Star Delta
Mechanical
Interlock
Complete with Code
Indicating Control Circuit
Voltage (2)
Weigh lb. (kg)
Line Voltage - Delta Connection
220/
380/
LC3D32Akk
230 V
400 V
415 V
kW
440 V
kW
kW
kW
Plate Mounted
Maximum Operating Rate: 30 starts/hour. Maximum starting time: 30 seconds.
4
7.5
11
7.5
11
22
30
37
7.5
11
22
30
37
–
–
–
–
–
–
–
–
–
1
–
–
–
–
1
– (3)
– (3)
– (3)
– (3)
– (3)
–
–
–
–
–
1
1
1
1
1
With
LC3D09A••
3.4 (1.530)
3.4 (1.530)
3.8 (1.730)
4.5 (2.030)
9.6 (4.360)
9.9 (4.500)
9.6 (4.360)
9.9 (4.500)
11.5 (5.200)
12.0 (5.400)
26.0 (11.800)
26.7 (12.100)
26.7 (12.100)
26.7 (12.100)
5.5
11
15
18.5
With
LC3D12A••
18.5
25
With
LC3D18A••
With
LC3D32A••
37
Without
With
LC3D40••
LC3D40••A64
LC3D50••
30
37
63
75
55
59
59
–
–
–
–
1
1
1
1
1
1
1
1
– (3)
– (3)
– (3)
– (3)
–
–
–
–
– (3) Without
With
LC3D50••A64
LC3D80••
75
75
75
– (3) Without
With
LC3D80••A64
LC3D115•• (4)
LC3D115••A64 (4)
LC3D150•• (4)
LC3D150••A64 (4)
110
132
110
132
110
147
– (3) Without
With
1 (3) Without
With
Rail Mounted (35 mm DIN rail)
Maximum Operating Rate: 12 starts/hour. Maximum starting time: 30 seconds.
3
4
5.5
7.5
5.5
7.5
5.5
7.5
–
–
–
–
–
–
–
–
–
–
1
1
With
With
LC3K06••
LC3K09••
1.6 (0.740)
1.6 (0.740)
Maximum operating rate: 30 starts/hour. Maximum starting time: 30 seconds.
4
7.5
11
7.5
11
22
30
7.5
11
22
30
–
–
–
–
–
–
–
–
–
–
–
–
– (3)
– (3)
– (3)
– (3)
–
–
–
–
1
1
1
1
With
With
With
With
LC3D090A••
LC3D120A••
LC3D180A••
LC3D320A••
3.4 (1.530)
3.4 (1.530)
3.8 (1.730)
4.5 (2.030)
5.5
11
15
18.5
25
(1) Protection must be provided by the addition of an overload relay, to be ordered separately. Select appropriate overload relay for setting at 0.58 of
the full load rated motor current (see pages 134 and 135).
(2) Standard control circuit voltages
Volts ac 50/60 Hz
Wye-delta Starters LC3K06 and K09
Code B7 C7
24
36
42
48
110
F7
220
M7
M7
230
P7
240
U7
380
–
400
V7
415
N7
440
R7
D7
E7
Wye-delta starters LC3D09A to D150, LC3D090A to D320A
Code B7 D7 E7
For other voltages, please consult your Regional Sales Office.
–
F7
P7
U7
Q7
V7
N7
R7
(3) One auxiliary contact block type LADN can also be installed, see page 107.
(4) These starters consist of contactors LC1D115 or D150 without connectors.
146
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ D-Line Contactors and Starters
AC Wye-delta Starters LC3D (International Applications Only)
Wye-delta Starting
Current
7
This method of starting is applicable to motors on which all six stator
terminals are accessible and whose delta connection voltage corresponds
to the mains voltage.
6
Wye-delta starting should be used for motors starting on no-load or having
a low load torque and gradual build-up: the starting torque in star
connection is reduced to one third of the direct starting torque, i.e. about
50% of the rated torque; the starting current in star connection is about 1.8
5
4
3
2
1
to 2.6 times the rated current.
1
The transition from wye to delta connection must occur when the machine
has run up to speed. A too rapid build-up in load torque would cause the
stabilized run-up speed to be too low and would therefore eliminate any
advantage in this method of starting: this is the case with certain machines
whose load torque depends on the machine speed (a characteristic of
centrifugal machines, for example).
All wye-delta starters are supplied with a special LA2DS2 or LA2KT2k time
delay relay which imposes a delay on the delta contactor during the
transition period in order to allow the star contactor sufficient breaking time.
2
For ratings D115 and D150, this function is performed by a time delay
auxiliary contact block LA2DT2 and a control relay.
0
0
0,25
0,50
0,75
1
Speed
1 Starting in direct delta connection
2 Starting in wye connection
Torque
2,5
2
1
1,5
(1)
1
2
3
0,5
0
0
0,25
0,50
0,75
1
Speed
1 Starting in direct delta connection
2 Starting in star connection
3 Machine resistive torque
(1) Motor manufacturers generally specify machine load torques.
Example: maximum resistive torque on completion of star-delta start (expressed as a proportion of the rated torque).
147
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ D-Line Contactors and Starters
AC Wye-delta Starter Kits (International Applications Only)
AC Wye-delta Starter Kits (International Applications Only)
a
KM1
a
a
a
1b
3
KM
1c
KM2
KM2
KM2
1d
1b
1c
1a
a
2
148
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ D-Line Contactors and Starters
AC Wye-delta Starter Kits (International Applications Only)
Wye-delta Starters, for Motor Control, 7.5 to 132 kW (1), without Mechanical Interlock, for
Customer Assembly (on plate or on mounting rail) (2) - References
Starters for Direct Combination with Circuit-breaker
Maximum Operating Rate: 30 starts/hour. Maximum starting time: 30 seconds
Standard Power Ratings of Squirrel Cage Motors (3) Motor Thermal-
Mains Voltage-delta
Catalog Number
Complete with Code Indicating Control Circuit Voltage (4)
magnetic MCB
line
delta
star
400/415 V
kW
440 V
kW
KM2
KM3
KM1
7.5
–
7.5
9
GV2ME20
GV2ME20
GV2ME21
GV2ME22
GV2ME32
LC1D09••
LC1D12••
LC1D12••
LC1D18••
LC1D18••
LC1D09••
LC1D12••
LC1D12••
LC1D18••
LC1D18••
LC1D09••
LC1D09••
LC1D09••
LC1D09••
LC1D09••
9
11
–
11
15
15
Separate Parts
Description
Illustration Item No. Catalog Number
LAD912GV
Weight lb. (kg)
Mounting Kit comprising:
Power circuit connections and 1 time delay contact block LADS2
a
0.29 (0.130)
Starters for Mounting Separately from Upstream Protection
Maximum Operating Rate : 30 starts/hour. Maximum starting time: 30 seconds
Standard power ratings of squirrel cage motors (3) Contactors
Separate Parts
Mains voltage-delta
(basic references to be completed with code indicating the voltage) (4)
(see below)
220/230 V
kW
380/400 V 415 V
440 V
kW
line
delta
KM3
star
Component
Type
kW
kW
KM2
KM1
4
7.5
11
7.5
11
7.5
11
LC1D09••
LC1D12••
LC1D18••
LC1D32••
LC1D40••
LC1D50••
LC1D80••
LC1D115••
LC1D150••
LC1D09••
LC1D12••
LC1D18••
LC1D32••
LC1D40••
LC1D50••
LC1D80••
LC1D115••
LC1D150••
LC1D09••
LC1D09••
LC1D09••
LC1D18••
LC1D40••
LC1D40••
LC1D50••
LC1D80••
LC1D115••
D09
D12
D18
D32
D40
D50
D80
D115
D150
5.5
11
15
18.5
30
37
63
75
18.5
25
22
22
30
30
37
37
37
55
59
59
75
75
75
110
132
110
132
110
147
Separate Parts
Description
Illustration Item No.
For use on
D09 to D18
D32
Catalog Number
LAD91217
Weight lb. (kg)
0.40 (0.180)
0.65 (0.310)
0.83 (0.380)
1.06 (0.480)
1.5 (0.680)
Mounting Kit comprising:
LAD93217
- 1 time delay contact block LADS2 (D09 to D80) (3)
- power circuit connections (D09 to D80)
- screws and clamps for attaching contactors to the
plate (D40 to D80)
1 a
1 b
1 c
D40
LA9D4017
D50
LA9D5017
- terminal block (D09 to D32)
1 d
2
D80
LA9D8017
Equipment Mounting Plate
D09, D12, D18
D32
LA9D12974
LA9D32974
LA9D40973
LA9D80973
0.33 (0.150)
0.40 (0.180)
0.66 (0.300)
0.66 (0.300)
D40 and D50
D80
(1) Protection must be provided by the addition of a thermal overload relay, to be ordered separately. Select appropriate overload relay for setting at
0.58 of the rated motor current, see pages 134 and 135.
(2) For mounting, assembly and cabling: refer to installation instructions supplied with the equipment.
(3) See comments on page 147.
(4) See page 115.
149
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ D-Line Contactors and Starters
AC Wye-delta Starter Kits (International Applications Only)
Wye-delta Starters - Dimensions, Schematics
Dimensions for Wye-delta Starters
On mounting rail AM1-DP, pre-assembled
LC3-D090A to D320A
2xØ0.28
2xØ7
KM3
KM1
KM2
6.30
160
c
6.89
175
LC3
b
c
D090A to D180A
6.0 (153)
5.4 (139)
D320A
5.6 (137)
5.9 (145)
5.8 (149)
with LAD-S
with LAD-S and sealing cover 5.8 (143)
Schematics
LC3-K, LC3-D09A to D80 / LC3D090A to D320A
LC3-K
LC3-D
KM3/5
KM3 : 5
O
– KM2
– KM3
– KM1
O
– KM2
I
– KM1
54 53
– KM2
– KM1
l
(1)
– KM3
– KM1
– KM2
– KM2
T
– KM3
– KM1
T
– KM1
– KM3
– KM2
N
KM2 : 1 (N)
– KM1
– KM2
– KM3
Y
L
LC3-D09A to D18A:
Mechanical Interlock between KM3 and KM1
KM3/1
(1) Recommended cabling for reversal of motor rotation (Standard motor, viewed from shaft end)
For LC3D50, D80
LC3-D115 and D150
– F1
– F1
(1)
O
– KM2
– KM3
– KM1
– KM2
– KM1
– KM1
l
– KM1
– KM2
– KM3
– KM2
– KA1
– F2
– KM1
– KM2
– KA1
– KM3
Y
L
(1) Recommended cabling for reversal of motor rotation (Standard motor, viewed from shaft end)
150
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ D-Line Contactors and Starters
Enclosed Contactors and Starters
Enclosed Contactors and Starters
Horsepower Ratings for North American Applications of D-Line Products in Metal Enclosures
D-line enclosed full voltage starters are available in Type 1 and Type 12/3R enclosures through 50 hp at 460 Vac.
E154118
CCN NLDX
CCN NLDX7
LR23506 41
Class 3211 04
See pages 106 to 112 for a complete selection of D-line accessories. See page 155 for Insta-Kit accessories.
Enclosed full voltage non-reversing starters
Max. Horsepower Ratings (AC3)
3 Phase
Auxiliary
Contacts
Current
Rating
of Contactor
Catalog Number
Catalog Number
Type 12/3R
Weight
kg (lb.)
Weight
kg (lb.)
200 V
230 V
460 V
575V
N.O.
N.C.
Type 1
2
2
5
71/2
10
15
20
25
1
1
1
1
1
...
...
...
...
...
9
12
18
25
32
LE1D093A62(1)(2)(3)(4)(5)
LE1D123A62(1)(2)(3)(4)(5)
LE1D183A62(1)(2)(3)(4)(5)
LE1D253A62(1)(2)(3)(4)(5)
LE1D323A62(1)(2)(3)(4)(5)
3.1 (6.9)
3.1 (6.9)
3.1 (6.9)
3.3 (7.3)
3.3 (7.3)
LE1D093A72(1)(2)(3)(4)(5)
LE1D123A72(1)(2)(3)(4)(5)
LE1D183A72(1)(2)(3)(4)(5)
LE1D253A72(1)(2)(3)(4)(5)
LE1D323A72(1)(2)(3)(4)(5)
3.5 (7.7)
3.5 (7.7)
3.5 (7.7)
3.6 (8.1)
3.6 (8.1)
3
3
71/2
10
15
20
5
5
5
71/2
10
71/2
10
10
15
20
10
15
20
20
30
30
40
50
30
40
50
60
1
1
1
1
1
1
1
1
40
50
65
80
LE1D403A62(1)(2)(3)(4)(5)
LE1D503A62(1)(2)(3)(4)(5)
LE1D653A62(1)(2)(3)(4)(5)
LE1D803A62(1)(2)(3)(4)(5)
5.1 (11.4) LE1D403A72(1)(2)(3)(4)(5)
5.1 (11.4) LE1D503A72(1)(2)(3)(4)(5)
7.4 (16.5) LE1D653A72(1)(2)(3)(4)(5)
7.6 (16.8) LE1D803A72(1)(2)(3)(4)(5)
5.5 (12.3)
5.5 (12.3)
7.8 (17.4)
8.0 (17.8)
Enclosed full voltage reversing starters
Max. Horsepower Ratings (AC3)
3 Phase
Auxiliary
Contacts
Current
Rating
of Contactor
Catalog Number
Type 1
Catalog Number
Type 12/3R
Weight
kg (lb.)
Weight
kg (lb.)
200 V
230 V
460 V
575 V
N.O.
N.C.
2
2
5
71/2
10
2
2
2
2
2
2
2
2
2
2
9
12
18
25
32
LE2D093A62(1)(2)(3)(4)(5)
LE2D123A62(1)(2)(3)(4)(5)
LE2D183A62(1)(2)(3)(4)(5)
LE2D253A62(1)(2)(3)(4)(5)
LE2D323A62(1)(2)(3)(4)(5)
4.5 (10) LE2D093A72(1)(2)(3)(4)(5)
4.5 (10) LE2D123A72(1)(2)(3)(4)(5)
4.5 (10) LE2D183A72(1)(2)(3)(4)(5)
4.5 (10) LE2D253A72(1)(2)(3)(4)(5)
4.5 (10) LE2D323A72(1)(2)(3)(4)(5)
4.9 (10.8)
4.9 (10.8)
4.9 (10.8)
4.9 (10.8)
4.9 (10.8)
3
3
71/2
10
15
20
5
5
15
5
71/2
10
20
25
71/2
10
10
15
20
10
15
20
20
30
30
40
50
30
40
50
60
2
2
2
2
2
2
2
2
40
50
65
80
LE2D403A62(1)(2)(3)(4)(5)
LE2D503A62(1)(2)(3)(4)(5)
LE2D653A62(1)(2)(3)(4)(5)
LE2D803A62(1)(2)(3)(4)(5)
4.5 (10) LE2D403A72(1)(2)(3)(4)(5)
4.5 (10) LE2D503A72(1)(2)(3)(4)(5)
4.5 (10) LE2D653A72(1)(2)(3)(4)(5)
4.5 (10) LE2D803A72(1)(2)(3)(4)(5)
4.9 (10.8)
4.9 (10.8)
4.9 (10.8)
4.9 (10.8)
NOTE: Use of control circuit transformers requires Insta-Kit wiring.
1. Control Power Transformer: Select letter from below for primary voltage of CPT.
Control Power Transformer Primary Voltage Code Table
Voltage
No Transformer used
208
240
480
600
Code
O
L
M
T
X
2. Contactor/starter coil voltage: Select coil voltage from table below.
NOTE: If control transformer is used, the only options available are 24 or 120 volts as the secondary of
the transformer.
Contactor Coil Voltage Table
24
120
208
L
240
U
480
T
600
X
Voltage
AC
B
G
3. Coil Frequency: Select: 7 = dual frequency coils (50/60 Hz), 6 = 60 Hz.
NOTE: For 9 to 32 A contactors, only dual frequency coils are available. For 40 to 80 A contactors, the
24 V to 240 V coils are dual frequency only (50/60 Hz.). The 480 V to 600 V coils are 60 Hz. only.
4. Overload relay type: Select: 0 = No overload relay, 1 = Trip Class 10, 2 = Trip Class 20.
5. Overload relay range: Select code from page 152.
NOTE: If no overload relay is required, leave this portion of the catalog number blank.
151
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ D-Line Contactors and Starters
Enclosed IEC Non-Combination Starters
Enclosed IEC Non-combination Starters
Enclosed starter overload relay selection table
For use on
Contactors
Code
Range
01
02
03
04
05
06
07
08
10
12
14
16
21
22
30
32
53
55
57
59
61
63
0.1–0.16
0.16–0.25
0.25–0.40
0.40–0.63
0.63–1.0
1.0–1.6
1.6–2.5
2.5–4
LC1D09–D32 q
LC1D09–D32 q
LC1D09–D32 q
LC1D09–D32 q
LC1D09–D32 q
LC1D09–D32 q
LC1D09–D32 q
LC1D09–D32
4–6
LC1D09–D32
LE2D093A62
5.5–8
LC1D09–D32
7–10
LC1D09–D32
9–13
LC1D12–D32
12–18
LC1D18–D32
16–24 q 17-25 c
23-28
LC1D25–D32 q LC1D40-80 c
LC1D25–D32 c
LC1D25–D32
25-32 q 23–32 c
30–38
LC1D40–D80
30–40
LC1D40–D80
37–50
LC1D40–D80
48–65
LC1D40–D80
55–70
LC1D40–D80
63–80
LC1D40–80
q
c
Available in Class 10 only
Available in Class 20 only
NOTE: Use of control circuit transformers requires Insta-Kit wiring.
1. Control Power Transformer: Select letter from below for primary voltage of CPT.
Control Power Transformer Primary Voltage Code Table
Voltage
No Transformer used
208
240
480
600
Code
O
L
M
T
X
2. Contactor/starter coil voltage: Select coil voltage from table below.
NOTE: If control transformer is used, the only options available are 24 or 120 volts as the secondary of
the transformer.
Contactor Coil Voltage Table
24
120
208
L
240
U
480
T
600
X
Voltage
AC
B
G
3. Coil frequency: Select: 7 = dual frequency for all starter coil selections except for 480 V or 600 V
coils, on 40 A - 80 A starters select 6, 60 Hz only.
4. Overload relay type: Select: 0 = No overload relay, 1 = Trip Class 10, 2 = Trip Class 20.
5. Overload relay range: Select code from page 155.
NOTE: If no overload relay is required, leave this portion of the catalog number blank.
152
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ D-Line Contactors and Starters
Enclosed IEC Combination Starters
Enclosed IEC Combination Starters
Horsepower Ratings for North American Applications of
D-Line Products in Metal Enclosures with Fusible Disconnect Switch or Circuit Breaker
IEC combination starters combine the requirements of motor overload and short circuit protection in one
convenient compact package. All devices provide Type 2 Coordination through 30 hp at 460 V. Devices
are available in Type 1 and Type 12/3R enclosures.
NOTE: Use tables and notes from page 152 to complete the catalog numbers. See pages 106 to 112
for a complete selection of D-line accessories. See page 155 for Insta-Kit accessories.
E154118
LR23506 41
CCN NLDX
Class 3211 04
CCN NLDX7
Enclosed full voltage non-reversing fusible combination starters
Max. Horsepower Ratings (AC3)
3 Phase
Fuse Clip
Rating
Auxiliary
Contacts
Catalog Number
Catalog Number
Type 12/3R
Current
Rating of
Contactor
Weight
kg (lb.)
Weight
kg (lb.)
UL
Class
200 V 230 V
460 V 575 V
Amperes
N.O. N.C.
Type 1
2
2
5
71/2
10
15
20
25
30
30 A
30 A
30 A
30 A
60 A
60 A
CC
CC
J
1
1
1
1
1
1
...
...
...
...
...
1
9
12
18
25
32
40
LE1D096B62(1)(2)(3)(4)(5)
LE1D126B62(1)(2)(3)(4)(5)
LE1D186B62(1)(2)(3)(4)(5)
LE1D256B62(1)(2)(3)(4)(5)
LE1D326C62(1)(2)(3)(4)(5)
LE1D406C62(1)(2)(3)(4)(5)
8.1 (18)
8.1 (18)
8.1 (18)
8.1 (18)
LE1D096B72(1)(2)(3)(4)(5)
LE1D126B72(1)(2)(3)(4)(5)
LE1D186B72(1)(2)(3)(4)(5)
LE1D256B72(1)(2)(3)(4)(5)
8.1 (18)
8.1 (18)
8.1 (18)
8.1 (18)
11.7 (26)
12.6 (28)
3
3
71/2
10
15
20
30
5
5
5
71/2
71/2
10
10
J
J
11.7 (26) LE1D326C72(1)(2)(3)(4)(5)
12.6 (28) LE1D406C72(1)(2)(3)(4)(5)
10
J
Enclosed full voltage reversing fusible combination starters
Max. Horsepower Ratings (AC3)
3 Phase
Fuse Clip
Rating
Auxiliary
Contacts
Catalog Number
Catalog Number
Weight
Current
Rating of
Contactor
Weight
kg (lb.)
kg (lb.)
UL
Class
200 V
230 V 460 V 575 V
Amperes
N.O. N.C.
Type 1
Type 12/3R
2
2
5
71/2
10
15
20
25
30
30 A
30 A
30 A
30 A
60 A
60 A
CC
CC
J
2
2
2
2
2
2
2
2
2
2
2
2
9
12
18
25
32
40
LE2D096B62(1)(2)(3)(4)(5)
LE2D126B62(1)(2)(3)(4)(5)
LE2D186B62(1)(2)(3)(4)(5)
LE2D256B62(1)(2)(3)(4)(5)
LE2D326C62(1)(2)(3)(4)(5)
LE2D406C62(1)(2)(3)(4)(5)
11.7 (26) LE2D096B72(1)(2)(3)(4)(5)
11.7 (26) LE2D126B72(1)(2)(3)(4)(5)
11.7 (26) LE2D186B72(1)(2)(3)(4)(5)
11.7 (26) LE2D256B72(1)(2)(3)(4)(5)
12.2 (27) LE2D326C72(1)(2)(3)(4)(5)
14.0 (31) LE2D406C72(1)(2)(3)(4)(5)
11.7 (26)
11.7 (26)
11.7 (26)
11.7 (26)
12.2 (27)
14.0 (31)
3
3
71/2
10
15
20
30
5
5
5
71/2
71/2
10
10
J
J
10
J
Enclosed full voltage non-reversing circuit breaker combination starters
Max. Horsepower Ratings (AC3)
3 Phase
Circuit
Breaker
Maximum
Current
Rating
15 A
Auxiliary
Contacts
Catalog Number
Catalog Number
Current
Rating of
Contactor
Weight
kg (lb.)
Weight
kg (lb.)
200 V
230 V
460 V
575 V
N.O.
N.C.
Type 1
Type 12/3R
2
2
5
71/2
10
15
20
25
30
1
1
1
1
1
1
-
9
12
18
25
32
40
LE1D097D62(1)(2)(3)(4)(5) 9.0 (20) LE1D097D72(1)(2)(3)(4)(5) 9.0 (20)
LE1D127D62(1)(2)(3)(4)(5) 9.0 (20) LE1D127D72(1)(2)(3)(4)(5) 9.0 (20)
LE1D187E62(1)(2)(3)(4)(5) 9.0 (20) LE1D187E72(1)(2)(3)(4)(5) 9.0 (20)
LE1D257E62(1)(2)(3)(4)(5) 9.0 (20) LE1D257E72(1)(2)(3)(4)(5) 9.0 (20)
LE1D327F62(1)(2)(3)(4)(5) 12.2 (27) LE1D327F72(1)(2)(3)(4)(5) 12.2 (27)
LE1D407F62(1)(2)(3)(4)(5) 13.0 (29) LE1D407F72(1)(2)(3)(4)(5) 13.0 (29)
3
3
71/2
10
15
20
30
-
15 A
5
5
-
30 A
5
71/2
71/2
10
10
-
30 A
-
50 A
10
1
50 A
Enclosed full voltage reversing circuit breaker combination starters
Max. Horsepower Ratings (AC3)
3 Phase
Circuit
Breaker
Maximum
Current
Rating
15 A
Auxiliary
Contacts
Catalog Number
Catalog Number
Type 12/3R
Current
Rating of
Contactor
Weight
kg (lb.)
Weight
kg (lb.)
200 V
230 V
460 V
575 V
N.O.
N.C.
Type 1
2
2
5
71/2
10
15
20
25
30
2
2
2
2
2
2
2
2
2
2
2
2
9
12
18
25
32
40
LE2D097D62(1)(2)(3)(4)(5)
LE2D127D62(1)(2)(3)(4)(5)
LE2D187E62(1)(2)(3)(4)(5)
LE2D257E62(1)(2)(3)(4)(5)
LE2D327F62(1)(2)(3)(4)(5)
LE2D407F62(1)(2)(3)(4)(5)
10.8 (24) LE2D097D72(1)(2)(3)(4)(5)
10.8 (24) LE2D127D72(1)(2)(3)(4)(5)
12.6 (28) LE2D187E72(1)(2)(3)(4)(5)
12.6 (28) LE2D257E72(1)(2)(3)(4)(5)
12.6 (28) LE2D327F72(1)(2)(3)(4)(5)
14.4 (32) LE2D407F72(1)(2)(3)(4)(5)
10.8 (24)
10.8 (24)
12.6 (28)
12.6 (28)
12.6 (28)
14.4 (32)
3
3
71/2
10
15
20
30
15 A
5
5
30 A
5
71/2
71/2
10
10
30 A
50 A
10
50 A
153
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ D-Line Contactors and Starters
Enclosed IEC Combination Starters
Enclosed starter overload relay selection table
For use on
Contactors
Code
Range
01
02
03
04
05
06
07
08
10
12
14
16
21
22
30
32
53
55
57
59
61
0.1–0.16
0.16–0.25
0.25–0.40
0.40–0.63
0.63–1.0
1.0–1.6
1.6–2.5
2.5–4
LC1D09–D32 q
LC1D09–D32 q
LC1D09–D32 q
LC1D09–D32 q
LC1D09–D32 q
LC1D09–D32 q
LC1D09–D32 q
LC1D09–D32
LC1D09–D32
LC1D09–D32
LC1D09–D32
LC1D12–D32
LC1D18–D32
LC1D25–D32
LC1D25–D32 c
LC1D25–D32
LC1D40–D80
LC1D40–D80
LC1D40–D80
LC1D40–D80
LC1D40–D80
4–6
5.5–8
7–10
9–13
12–18
16–24
23-28
LE1D406C72
23–32
30–38
30–40
37–50
48–65
55–70
q
c
Available in Class 10 only
Available in Class 20 only
NOTE: Use of control circuit transformers requires Insta-Kit wiring.
1. Control Power Transformer: Select letter from below for primary voltage of CPT.
Control Power Transformer Primary Voltage Code Table
Voltage
No Transformer used
208
240
480
600
Code
O
L
M
T
X
LE1D097D62
2. Contactor/starter coil voltage: Select coil voltage from table below.
NOTE: If control transformer is used, the only options available are 24 or 120 volts as the secondary of
the transformer.
Contactor Coil Voltage Table
Voltage
AC
24
120
208
L
240
U
480
T
600
X
B
G
3. Coil frequency: Select: 7 = dual frequency for all starter coil selections except for 480 V or 600 V
coils, on 40 A - 80 A starters select 6, 60 Hz only.
4. Overload relay type: Select: 0 = No overload relay, 1 = Trip Class 10, 2 = Trip Class 20.
5. Overload relay range: Select code from page 155.
NOTE: If no overload relay is required, leave this portion of the catalog number blank.
154
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ D-Line Contactors and Starters
Enclosed IEC Combination Starters
Factory Modifications and Insta-Kit Selection
Add the Factory Modification Code to the end of the catalog number created from pages 151 and 152. Only one
operator scheme (factory modification code or field-installable Insta-Kit option) can be used. Only the combinations of
operators and pilot lights shown below can be ordered. Pilot lights will be at the coil voltage indicated in the catalog
number for the starter.
LA9FF4TK
All Others
E61239
CCN XPTQ
CCN XPTQ7
E154118
CCN NLDX
CCN NLDX7
LR23506 41
Class 3211 04
Factory Modification
Code q
Insta-Kits (for field
installation)
Description
Control Units Only
For-Rev-Stop Push Button
Start/Stop Push Button
A06L
A06G
N/A
LA9CA06LT
LA9CA06GT
N/A
I/O (Start/Stop) Push Button
I/O Push Button (double touch)
Emergency Stop
A06I
N/A
LA9CA06IO
N/A
Start/Stop
L1
STOP
L2
Start / Mushroom Head Stop Push Button
Hand-Off-Auto Selector Switch
On/off Selector Switch
A06X
A06E
A06D
LA9CA06XT
LA9CA06ET
LA9CA06DT
START
2 3
OLR
95 96
A
B
1
4
M
Pilot Lights only
13
14
LED Pilot light, 24, 120 or 240 V
Green-Red Pilot Light, 120 V c
A16S
A06S
A06F
LA9CA16ST a
LA9CA06ST
On-Off Selector Switch
Green-Red Transformer Pilot Light, 120, 208/240, 480 or 600 V c
Available combination of control units and pilot lights
Hand-Off-Auto Selector Switch, 120 V LED Pilot Light
Start/Stop Push Button w/ 24, 120 or 240 V LED Pilot Light
On/off Selector w/ 24, 120 or 240 V LED Pilot Light
Start/Stop Push Button w/ Green-Red Transformer Pilot Light
Start/Stop Push Button w/Green-Red Pilot Light
Hand-Off-Auto Selector Switch w/Green-Red Pilot Light 120 V
Hand-Off-Auto Selector Switch w/Green-Red Transformer Pilot Light
On/Off Selector w/Green-Red Pilot Light
LA9CA06FT a
L1
L2
A16U
A16V
A16W
A06N
A06G
A06U
A06J
LA9CA16UT a
LA9CA16VT a
LA9CA16WT a
LA9CA06NT a
LA9CA06VT
OFF
ON
X1 X2
PL
OLR
95 96
1
2 3
4
A
B
M
61 62
X1
X2
PL
LA9CA06UT
LA9CA06JT a
LA9CA06WT
LA9CA06HT a
H-O-A Selector Switch
A06W
A06H
L1
L2
OFF
On/Off Selector w/Green-Red Transformer Pilot Light
Control Power Transformer
X1 X2
PL
HAND AUTO
95 96
3
4
M
Standard VA, 2 fuses in Primary, 1 Fuse in secondary
50 VA extra, 2 fuses in Primary, 1 Fuse in secondary
100 VA extra, 2 fuses in Primary, 1 Fuse in secondary
Local / Remote Adapter, 3-wire k
A206P
f
A207P
f
3
4
A208P
f
61 62
X1
X2
–
–
–
–
LA9AADIS3
LA9AADIS4
LA9AADIS5
LA9AADIS7
PL
Local / Remote Adapter, 4-wire k
Remote by Customer Connection
Local / Remote Adapter, 5-wire k
Local / Remote Adapter, 7-wire k
q
Add these forms to the catalog number selected on pages 151 or 152. The numbers as shown are for use in NEMA 1 Enclosures. For uses in NEMA
12/3R change the 6 to a 7 (ex A06U becomes A07U). The change DOES NOT apply to control power transformer forms or Insta-Kits.
Pilot lights are wired such that the light is on when the contactor is energized. For non-LED type pilot lights, a green lens is installed on the unit when
shipped. A red lens is included for use as applicable.
c
f
Select Insta-Kit from table below.
a
k
Complete the catalog number for the Insta-Kit by selecting the voltage code from the appropriate tables below.
3-wire adapter required when START/STOP pushbutton remote station is used in conjunction with START/STOP local control OR if local pilot light
only is used.
4-wire adapter required when FOR/REV/STOP is required for both local and remote control.
5-wire adapter required when START/STOP pushbutton with pilot light remote station OR pilot light only remote is used with START/STOP pushbutton
local control.
7-wire adapter required for remote control only applications.
Total VA
Insta-Kit Catalog Number
LA9TFD32 a
Weight / kg (lb.)
0.80 (1.75)
50
100
LA9TFD80 a
1.45 (3.25)
Voltage Codes for pilot lights
Voltage (Vac)
24
120
208/240
480
600
Code
B
G
M
T
X
Voltage Codes for control power transformers
120
208
240
480
600
A
208
120
L
240
M
480
600
X
Primary Voltage
Secondary Voltage 24
E
D
C
B
T
Code
155
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ D-Line Contactors and Starters
Dimensions for Enclosed Combination and Non-Combination IEC Starters
Dimensions for Enclosed Combination and Non-Combination IEC Starters
Combination Starter Dimensions with Rotary Disconnect Handle - Type 1
Knockout Schedule
Knockout
Conduit Size, in. (mm)
0.50 (12.7)
A
B
C
1.00 (25.4); 1.25 (31.8)
0.50 (12.7); 0.75 (19.05)
B
C
B
B
C
B
10
254
7.5
191
5
127
8
203
A
7.5
3
191
76
A
0.6875
17
R
R
A
A
Provision for 1/4 in. screw / Provisión para el tornillo de 1/4 / Option pour vis de 6,3 mm (1/4 po)
Dual Dimensions: Inches
mm
D09-25 (FVNR)
D09-40 (FVR); D32-40 (FVNR)
Type 12
10
254
5
127
7.75
197
8
203
3
76
7.75
197
R
R
Provision for 1/4 in. screw / Provisión para el tornillo de 1/4 / Option pour vis de 6,3 mm (1/4 po)
D09-25 (FVNR)
D09-40 (FVR); D32-40 (FVNR)
Non-combination Starter Dimensions
A
TYPE 1
TYPE 12/3R
J
Non-
reversing
Reversing
...
A
B
C
D
E
F
G
H
J
K
D
E
K
6.77 10.04 6.25 5.38
172
9.00 1-11/4
1/2-3/4
1-1/4
1/2 - 3
/
5.38 11.37
4
D09-25
–
R
255
158 136 228
25.4-31.7 12.7-19
25.4-6.3 12.7-19 13.6 288
8.66 10.83 7.21 7.25
9.75 11/4-11/2 1/2-3/4
1-11/4
1-1/4 1/2 - 3
5.38 12.15
/
4
D32-50
D65-80
D09-32
D40-80
220
10.63 13.98 7.21 9.22 12.94 11/4-11/2 1/2-3/4
270 355 183 234 328 31.7-38.1 12.7-19 25.4-31.7 25.4-6.3 12.7-19 13.6 385
275
183 184 247
31.7-38.1 12.7-19 25.4-31.7 25.4-6.3 12.7-19 13.6 308
F
G
H
1-11/4 1-11/4 1/2 - 3
/
5.38 15.30
D/2
4
Provision for 1/4" Screw
D
156
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ D-Line Contactors and Starters
Schematics for Enclosed IEC Non-Combination Starters
Schematics for Enclosed IEC Non-Combination Starters
Non-Reversing, Non-Combination 3-Phase Starter
White
Plug-in connector
Yellow
OL /
SC
Reset
Brown
Reversing, Non-Combination 3-Phase Starter
Plug-in Connector
Jumper
Jumper
Wire
4
Wire
3
OL /
SC
Reset
157
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ D-Line Contactors and Starters
Schematics for Enclosed IEC Combination Starters
Schematics for Enclosed IEC Combination Starters
Non-Reversing, Combination 3-Phase Starter
White
Plug-in connector
Yellow
Brown
OL /
SC
Reset
Reversing, Combination 3-Phase Starter
Plug-in Connector
Jumper
Jumper
Wire
4
Wire
3
OL /
SC
Reset
158
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ D-Line Contactors and Starters
Enclosed Contactors LE1D and LE2D
Enclosed Contactors LE1D (International Applications Only)
International
Applications Only
D.O.L. AC Starters for Motor Control (1) 2.2 to 45 kW, without Isolator Device
Characteristics
Conforming to standards
IEC 60947-4-1 and IEC 60439-1, VDE 0660-102, EN 60947
Degree of protection to IEC 60529 IP 659: LE2K, IP 657: LEpD09 to D35 and IP 557: LEpD405 to D955
Ambient air temperature
Operating positions
Material
For operation: - 5 to + 40 °C (- 41 to + 104 °F)
Identical to positions for contactors
Poly carbonate (2): LE2K and LEpD09 to D35. Sheet steel: LEpD405 to D955
Non-reversing Starters
Standard Power Ratings of 3-phase Motors
50/60 Hz in Category AC-3 (kW)
Maximum
Current I the
up to
Catalog Number,
Complete with Control
Circuit Voltage Code (3)
Standard
Voltages
Weight lbs
(kg)
220
380
660
690 V
415V
440 V
500 V
230 V
400 V
2.2
3
4
4
4
5.5
7.5
10
5.5
7.5
10
9
LE1DO9••
LE1D12••
LE1D18••
LE1D25••
LE1D35••
LE1D405••
LE1D505••
LE1D655••
LE1D805••
LE1D955••
F7 P7 V7
F7 P7 V7
F7 P7 V7
F7 P7 V7
F7 P7 V7
F7 P7 V7
F7 P7 V7
F7 P7 V7
F7 P7 V7
F7 P7 V7
2.03 (0.92)
2.03 (0.92)
2.24 (1.015)
2.24 (1.015)
9.53 (4.320)
10.63 (4.82)
10.69 (4.85)
10.69 (4.85)
11.33 (5.14)
12.0 (5.44)
5.5
7.5
11
15
18.5
22
30
37
45
5.5
9
5.5
9
12
18
25
35
40
50
65
80
95
4
5.5
7.5
11
15
18.5
22
25
11
15
22
25
37
45
45
11
15
22
30
37
45
45
15
15
18.5
22
18.5
30
30
33
37
37
55
45
LE1D12••
55
45
Reversing Starters
1.5
2.2
2.2
3
4
–
–
–
–
6
9
LE2K065••
LE2K095••
LE2D09••
LE2D09••
LE2D12••
LE2D18••
LE2D25••
LE2D35••
LE2D405••
LE2D505••
LE2D655••
LE2D805••
LE2D955••
F7 P7 V7
F7 P7 V7
F7 P7 V7
F7 P7 V7
F7 P7 V7
F7 P7 V7
F7 P7 V7
F7 P7 V7
F7 P7 V7
F7 P7 V7
F7 P7 V7
F7 P7 V7
F7 P7 V7
2.38 (1.08)
2.38 (1.08)
2.2
4
4
4.63 (2.100)
4.63 (2.100)
4.63 (2.100)
5.31 (2.410)
5.66 (2.570
9.0 (4.100)
–
–
–
–
5.5
7.5
10
5.5
7.5
10
9
3
5.5
7.5
11
15
18.5
22
30
37
45
5.5
9
5.5
9
12
18
25
35
40
50
65
80
95
4
5.5
7.5
11
15
18.5
22
25
11
15
22
25
37
45
45
11
15
22
30
37
45
45
15
15
18.5
22
18.5
30
11.6 (5.270)
12.06 (5.470)
12.06 (5.470)
14.77 (6.700)
15.43 (7.000)
30
33
37
37
LE2D12••
55
45
55
45
(1) Protection must be provided by addition of an overload relay, to be ordered separately, see pages 134 and 135.
(2) Avoid placing this material in contact with harsh substances (detergents, chlorinated solvents, ketones, alcohol, aromatic
hydrocarbons).
(3) Standard control circuit voltages.
Volts AC 50/60 Hz
LE2K
24
B7
B7
42
D7
D7
48
E7
E7
110
F7
115
–
220
M7
M7
230
P7
240
U7
380
Q7
Q7
400
V7
415
N7
440
R7
LE1, LE2D
F7
FE7
P7
U7
V7
N7
R7
For other voltages please consult your Regional Sales Office.
(4) Selection according to the number of operating cycles, please consult your Regional Sales Office.
159
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ D-Line Contactors and Starters
Enclosed Contactors LE1D and LE2D
D.O.L. AC Starters for Motor Control (1) 2.2 to 45 kW without Isolator Device, Non-reversing
Description
Standard versions comprise:
•
For non-reversing starters:
1 green Start button “I”,
1 red Stop/Reset button “O”.
•
For reversing starters:
1 Start button
1 Start button
1 red Stop/Reset button.
A,
E,
—
—
LE2K:
LE2D09 to D35:
1 2-position spring return selector switch “I”-“II”,
1 red Stop/Reset button “O”.
LE1D12••A04
—
LE2D405 to D955:
1 blue Reset button “R”.
Forms (installed by Telemecanique)
Description
For Use On
Suffix to be Added to Starter Catalog Number (2)
LE1D09 through D955
LE2D09 through D955
No push buttons on cover
A04
1 green Start button “I”
1 green Start button “II”
1 red Stop/Reset button “O”
LE2D405 through D955
A11
A05
LE1D09 through D955
LE2K06 and K09
1 blue Reset button “R”
LE2D09 through D35
LE1D12••A05
1 3-position stay put selector switch (“I”-”O”-”II”)
(“I”: Automatic Start; “O”: Stop;
“II”: Manual Start)
LE1D09 through D35
LE1D09 through D35
LE1D09 through D35
A09
A13
A35
1 blue Reset button “R”
1 2-position stay put selector switch (”O”-”I”)
(“O”: Stop; “I”: Manual Start)
1 blue Reset button “R”
1 3-position stay put selector switch ”O”-”I” with
spring return to center position (”I”: Manual start;
”O”: Stop, stay put)
1 blue Reset button “R”
1 neutral terminal
LE1D09 through D955
LE2K06 and K09
LE2D09 through D955
Fitted as standard on LE1 and LE2D18 to D955
starters ordered with 220 V (M7), 230 V (P7)
or 240 V (U7) control circuit voltage.
A59
LE1D12••A09
Accessories (installed by the customer)
Weight lbs
Description
For Use On
Catalog Number
(kg)
Start pushbutton latching device
for stay-put operation (Start-Stop)
LE1D405 through D955
LA9D09907
0.13 (0.06)
(1) See previous page.
(2) Example: LE1D093F7A04
Other versions: Combination of 2 accessories, please consult your Regional Sales Office.
LE1D12••A13
LE1D12••A35
160
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ D-Line Contactors and Starters
Enclosed Contactors with Fused Disconnect Switch LE2, LE4, and LE8
Enclosed Contactors with Fused Disconnect Switch LE4K/D (International Application Only)
International
Applications Only
D.O.L. AC Starters for Motor Control (1), 2.2 to 45 kW with Isolator Device
Characteristics
Conforming to standards
Degree of protection to IEC 529
Ambient air temperature
Operating positions
Material
IEC 60947-4-1 and IEC 60439-1, VDE 0660-102, EN 60947
IP 659: LEpK, IP 657: LEpD09 to D35 and IP 55: LEpD406 to D806
For operation: - 5 to + 40 °C (- 41 to + 104 °F)
Identical to positions for contactors
Poly carbonate (2): LEpK and LEpD09 to D35. Sheet steel: LEpD406 to D806
Non-reversing Starters
Standard Power Ratings of 3-phase Motors
50/60 Hz in Category AC-3 (kW)
Fuses to be fitted by the
customer
Operational
Current (A)
440 V
Catalog Number,
Complete with
Control Circuit
Voltage Code (3)
Weigh
lbs (kg)
Size
Type aM
A
220
380
660
690 V
415V
440 V
500 V
up to
230 V
400 V
1.5
2.2
2.2
4
2.2
3
-
-
-
6
9
10 X 38
10 X 38
10
LE4K065••
LE4K095••
3.19 (1.45)
3.19 (1.45)
4.32 (1.96)
4.32 (1.96)
4.32 (1.96)
4.85 (2.20)
4.85 (2.20)
11.4 (5.19)
12.7 (5.77)
14.2 (6.44)
14.7 (6.67)
15.6 (7.10)
4
4
-
12
or LE4D09•• (4)
2.2
3
4
5.5
7.5
11
4
5.5
9
4
5.5
7.5
10
-
-
9
10 X 38
10 X 38
10 X 38
10 X 38
14 X 51
14 X 51
22 X 58
22 X 58
22 X 58
12
16
20
25
32
40
63
80
80
LE4D09••
LE4D12••
LE4D18••
LE4D25••
LE4D35••
LE4D406••
LE4D506••
LE4D656••
LE4D806•• (5)
5.5
9
12
18
25
35
40
50
65
80
4
-
5.5
7.5
11
15
18.5
22
11
15
22
25
37
45
11
15
22
30
37
45
15
-
15
18.5
22
18.5
30
33
37
45
LE4D12••
18.5
22
30
30
37
37
55
Reversing Starters
1.5
2.2
2.2
3
4
-
-
-
-
6
9
10 X 38
10 x 38
10
12
LE8K065••
LE8K095••
or LE8D09•• (4)
LE8D09••
3.52 (1.60)
3.52 (1.60)
7.82 (3.55)
7.82 (3.55)
7.82 (3.55)
8.16 (3.70)
10.3 (4.67)
12.8 (5.80)
31.24 (14.17)
32.40 (14.17)
32.56 (14.77)
35.30 (16.00)
2.2
4
4
-
3
-
-
-
5.5
7.5
10
-
-
9
10 x 38
10 x 38
10 x 38
10 x 38
14 x 51
14 x 51
22 x 58
22 x 58
22 x 58
12
16
20
25
32
40
63
80
80
5.5
7.5
11
5.5
9
5.5
9
12
18
25
35
40
50
65
80
LE8D12••
4
-
LE8D18••
5.5
7.5
11
15
18.5
22
11
15
22
25
37
45
11
15
22
30
37
45
15
-
LE8D25••
15
18.5
22
18.5
30
33
37
45
LE8D35••
LE8D12••
18.5
22
LE2D406••
LE2D506••
LE2D656••
LE2D806••
30
30
37
37
55
(1) Protection must be provided by addition of an overload relay, to be ordered separately, see pages 134 and 135.
(2) Avoid placing this material in contact with harsh substances (detergents, chlorinated solvents, ketones, alcohol, aromatic
hydrocarbons).
(3) Standard control circuit voltages.
Volts AC 50/60 Hz
LE•K
24
B7
B7
42
D7
D7
48
E7
E7
110
F7
115
–
220
M7
M7
230
P7
240
U7
380
Q7
Q7
400
V7
415
N7
440
R7
LE•D
F7
FE7
P7
U7
V7
N7
R7
For other voltages please consult your Regional Sales Office.
(4) Selection according to dimensions and the number of operating cycles, please consult your Regional Sales Office.
(5) Supplied with 3 cable entries.
161
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ D-Line Contactors and Starters
Enclosed Reversing Starters with Fused Disconnect Switch LE2, LE4 and LE8
Enclosed Reversing Starters with Fused Disconnect Switch LE2D (Int’l App. Only)
International
Applications Only
D.O.L. AC Starters for Motor Control (1) 2.2 to 45 kW with Isolator Device
Description
Standard versions comprise:
•
For non-reversing starters:
1 green Start button “I”,
1 red Stop/Reset button “O”.
—
LE4K and LE4D09 to D656:
—
LE4D806:
no pushbuttons on cover.
•
For reversing starters:
1 Start button
1 Start button
1 red Stop/Reset button.
A,
—
LE8K:
E,
—
—
LE8D09 to D35:
1 2-position spring return selector switch “I”-“II”,
1 red Stop/Reset button “O”.
LE2D406 to D806:
no pushbuttons on cover
LE4D12••A04
Protection
Power Circuit
Control Circuit
LE4 and LE8K
1 3-pole isolating device
1 3-pole isolating device
1 3-pole isolating device
None
LE4 and LE8D09 to D35
LE4 and LE2D406 to D806
+ 1 additional pole LA8D254
+ 1 circuit-breaker GB2CB08
Forms (installed by Telemecanique)
Description
For Use On
Suffix to be Added to Starter Catalog Number (2)
LE4D09 through D656
LE8D09 through D35
No push buttons on cover
A04
1 green Start button “I”
1 green Start button “II”
1 red Stop/Reset button “O”
LE2D406 through D806
A11
A05
LE4D09 through D806
LE8K06 and K09
LE2D406 through D806
LE4D12••A05
1 blue Reset button “R”
1 neutral terminal
LE4K06 and K09
Fitted as standard on LE4D18 to D806, LE8D18 LE4D09 through D806
to D35 and LE4D406 to D806 starters ordered LE8K06 and K09
with 220 V (M7), 230 V (P7) or 240 V (U7) control LE8D09 through D35
circuit voltage. LE2D406 through D806
A59
Accessories (installed by the customer)
Weight lbs
Description
For Use On
Catalog Number
(kg)
Start pushbutton latching device
for stay-put operation (Start-Stop)
LE4D406 through D656
LA9D09907
0.13 (0.06)
(1) See previous page.
(2) Example: LE4D09F7A04
Other versions: Combination of 2 accessories, please consult your Regional Sales Office.
162
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ D-Line Contactors and Starters
Wye-delta Starters LE3D (International Applications Only)
Wye-delta Starters LE3D (International Applications Only)
Wye-Delta Starters for Motor Control from 4 to 75 kW, without Off-Load Isolator (1) - References
Selection
Standard Power Ratings of
Squirrel Cage Motors
Mains Voltage - Delta Connection (kW)
NormalControl
Circuit Voltage
Code
Catalog Number, Complete with Control
Circuit Voltage Code (2)
Weight
lbs (kg)
220 V
380 V
415V
440 V
Maximum operating rate in starts/hour: LE3-K: 12 and LE3-D: 30. Maximum starting time: 30 seconds. (4)
3
4
5.5
7.5
5.5
7.5
5.5
7.5
LE3K065••
LE3K095••
LE3D09••
LE3D12••
LE3D18••
LE3D32••
LE3D405••
LE3D505••
LE3D805••
F7 M7 Q7
F7 M7 Q7
F7 M7 Q7
F7 M7 Q7
F7 M7 Q7
F7 M7 Q7
F7 M7 Q7
F7 M7 Q7
F7 M7 Q7
3.22 (1.46)
3.22 (1.46)
8.05 (3.65)
8.05 (3.65)
8.27 (3.75)
11.38 (5.16)
17.99 (8.16)
17.97 (8.15)
30.87 (14.00)
or
5.5
11
11
18.5
25
11
22
30
37
59
75
11
22
30
37
59
75
15
18.5
30
37
55
LE3D12••
37
75
Specifications
Enclosure
LE3D09 through D80
LE3D09 through D18
Metal Enclosure, IP 559
Control (2 push buttons mounted on enclosure
cover)
1 green start button “I”
1 red stop/reset button “O”
No push buttons on cover
Connections
LE3D32 through D80
LE3K06 and K09
-
Pre-wired power and control circuit connections
A timer LA2-DS2 imposes a delay of 40 ms ± 15 ms on the delta contactor at the moment of changeover to ensure that the star contactor has sufficient
breaking time.
Forms (installed by Telemecanique)
Description
For Use On
Suffix to be Added to Starter Catalog Number (5)
No push buttons on cover
1 blue reset button “R”
LE3D09 through D18
LE3D09 through D80
A04
A05
1 green start button “I”
1 red stop/reset button “O”
LE3D32 through D80
A06
A59
1 neutral terminal
Fitted as standard on starters ordered with 240 V
(U7) control circuit voltage.
LE3K06 and K09
LE3D09 through D80
Mechanical interlock
Fitted as standard on starters
LE3K and LE3D09 to D35
LE3D405 TO D150
A64
Control Circuit Voltage Codes
LE3-K (6)
Control
Voltage
50/60 Hz
220/
230
230-
240
380/
400
400/
415
660/
690
12
24
36
42
48
110
127
230
400
440
500
Code
J7
B7
C7
D7
E7
F7
FC7
M7
P7
U7
Q7
V7
N7
R7
S7
Y7
LE3-D (6)
Control
Voltage
50/60 Hz
24
42
48
110
220/230
230
240
380/400
400
415
440
Code
B7
D7
E7
F7
M7
P7
U7
Q7
V7
N7
R7
(1) Overload protection by thermal overload relay, to be ordered separately. Select appropriate overload relay for setting at 0.58 the
full load rated motor current.
(2) Standard control circuit voltages (variable delivery time, please consult your Regional Sales Office).
(4) Selection according to size and number of operating cycles (see AC-3 curves, page 20).
(5) Example: LE3-D095F7A04.
(6) Other voltages: For LE3-K, please consult your Regional Sales Office.
Other versions: Combination of 2 accessories, please consult your Regional Sales Office.
163
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ D-Line Contactors and Starters
Wye-delta Starters with Fused Disconnect Switch LE3D (International Applications Only)
Wye-delta Starters with Fused Disconnect Switch LE3D (International Applications Only)
International
NOTE: Wiring methods differ from typical North American practice.
Applications Only
Contains UL Listed, CSA Certified, and CE marked components.
Assemblies are not UL Listed or CSA Certified.
Standard power ratings of squirrel cage motors
Mains voltages - delta connection
Fuses to be
installed by customer
Catalog
Number
c p
Weight
kg (lb.)
220 V
kW
380 V
kW
415 V
kW
440 V
kW
Size
Type aM
A
Maximum operating rate: 30 starts/hour. Maximum starting time: 30 seconds.
4
7.5
11
7.5
11
22
30
37
59
75
7.5
11
22
30
37
59
75
10 x 38
10 x 38
14 x 51
22 x 58
22 x 58
22 x 58
0
20
LE6D09••
3.900 (8.598)
3.900 (8.598)
4.850 (10.692)
7.650 (16.865)
16.90 (37.256)
17.00 (37.478)
27.50 (60.626)
5.5
11
15
18.5
30
37
25
LE6D12••
LE6D18••
LE6D326••
LE3D406••
LE3D506••
LE3D806••
18.5
25
40
63
37
80
55
125
160
LE6D12••
75
Specifications
Enclosure
LE3D09 to LE3D80
LE3D09 and LE3D12
LE3D18 to LE3D80
LE3D09 and LE3D12
Metal enclosure, degree of protection IP 559
Control (2 pushbuttons
on enclosure cover)
1 green Start button “l”
1 red Stop/Reset button “O”
No pushbuttons on cover
Isolator with external operator
Connections
–
1 3-pole isolator
+ 1 additional pole LA8D254
1 3-pole isolator and
1 circuit breaker GB2-CB08
LE3D18 to LE3D80
LE3D09 to LE3D80
Pre-wired power and control circuit connections
A timer LA2DS2 imposes a delay of 40 ms ± 15 ms on the delta contactor at the moment of changeover to ensure that the star contactor has sufficient
breaking time.
c
p
Overload protection by means of bimetallic overload relay, to be ordered separately. Select appropriate overload relay for
setting at 0.58 of the full-load rated motor current.
Complete catalog number with appropriate coil selection code below.
Coil Selection
50/60 Hz
24
42
48
E7
110
F7
220/230
M7
230
P7
240
U7
380/400
Q7
400
V7
415
N7
440
R7
Voltage Code B7
D7
LE6D12••A04
Forms (installed by Telemecanique)
Suffix to be added
to starter catalog number k
Description
For use on
No pushbuttons on cover
1 blue Reset button “R”
LE3D09 to LE3D12
LE3D09 to LE3D80
A04
A05
1 green Start button “I”
1 red Stop/Reset button “O”
LE3D18 to LE3D80
LE3D09 to LE3D80
A06
A59
1 neutral terminal
Fitted as standard on starters ordered with 240 V (U7) control supply
Mechanical interlock
Fitted as standard on starters
LE6D09 to D18
LE3D326 to D80
A64
k
For example: LE3D096F7A04.
LE6D12••A05
164
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ D-Line Contactors and Starters
Spare Parts and Accessories (International Applications Only)
Spare Parts and Accessories (International Applications Only)
Operating Heads for Start and Stop/Reset Pushbuttons
Description
For use on
Catalog Number
ZB5AA331
Weight – kg (lb.)
0.018 (0.040)
Flush green “I” (1)
Projecting red “O” (1)
LE1D09 to D35
LE1D09 to D35
LE1D09 and D12
LE1D18 to D35
ZB5AL432
0.019 (0.042)
ZB5AA331
LAD9091
0.002 (0.004)
Mounting kit for head
ZB5AL432
LAD91810
0.003 (0.006)
Operating Heads for Reset Pushbuttons
ZB5AA0
0.022 (0.048)
0.001 (0.002)
0.002 (0.004)
0.003 (0.006)
0.004 (0.008)
Flush blue “R” (2)
LE1D09 to D35
ZBA639 (3)
LAD9092
LAD91810
LAD9T4
LE1D09 and D12
Mounting kit for head ZB5AA0 +
ZBA639
LE1 or LE2D18 to D35
LE3, LE6, LE4 or LE8D09 to D35
ZB5AL432
Operating Heads for Selector Switches
Description
For use on
Catalog Number
ZB5AD3
Weight – kg (lb.)
0.024 (0.053)
3 position stay put
LE1D09 to D35
LE1D09 to D35
LE1D09 to D35
2 position stay put
ZB5AD2
0.024 (0.053)
3 position spring return to center
ZB5AD5
0.024 (0.053)
Contact Blocks
LAD9091
1 N.O.
spring return
LE1D09 to D35
LE1D09 to D35
ZENL1111
ZENL1121
0.010 (0.022)
0.010 (0.022)
1 N.C.
spring return
LE1D09 and D12
LAD90909
LAD91809
0.008 (0.017)
0.014 (0.031)
Contact block support
LE•D18 to D35 (4)
(1) Remember to order mounting kit LAD9091 or LAD91810, depending on the size.
(2) Remember to order mounting kit LAD9092.
(3) Sold in lots of 10.
ZB5AD•
(4) LE1, LE2, LE3, LE4, LE6 or LE8.
ZENL1111
LAD91809
165
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ D-Line Contactors and Starters
Spare Parts and Accessories (International Applications Only)
Empty Enclosures for D.O.L. Starters Without Isolator Device
Weight
Push button operating head(s) or blanking
plug(s) mounted on the cover
For use with
Catalog Number
kg (lb.)
Without
DE1DS1A04
DE1DS1A05
0.300 (0.66)
0.300 (0.66)
1 flush blue head “R”
1 flush green head “I”
1 projecting red head “O”
LE1D09, D12
DE1DS1
0.300 (0.66)
0.300 (0.66)
1 flush blue head “R”
1 switch
DE1DS1A13
DE1DS1A04
Without
DE1DS2A04
DE1DS2A05
0.500 (1.10)
0.500 (1.10)
1 flush blue head “R”
1 flush green head “I”
1 projecting red head “O”
LE1D18 to D35
DE1DS2
0.500 (1.10)
0.500 (1.10)
1 flush blue head “R”
1 switch
DE1DS2A13
DE1DS1A05
DE1DS1
DE1DS1A13
166
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ D-Line Contactors and Starters
LE·D Dimensions (International Applications Only)
LE·D Dimensions (International Applications Only)
Enclosed D-line Starters Without Fused Disconnect Switch
LE1D09 and D12
LE1D18 to D35
LE2D09 to D35
LE1D405 to D655
0.08 x 0.21
0.08 x 0.20
0.15 x 0.3
c1
= =
3.4
88
c1
=
=
3.9
101
=
4.13
=
c1
105
7.12
181
c1
c1
c1
LE1D
LE2D
6.3 (160)
5.7 (145)
6.0 (153.5)
–
Standard version
Version A04
Version A05
Version A09
Version A13
Version A35
5.05 (128.5)
4.7 (120)
Standard version
Version A04
Version A05
Version A09
Version A13
Version A35
6.0 (153.5)
5.7 (145)
6.0 (153.5)
6.3 (160)
6.3 (160)
6.3 (160)
Standard version
Version A04
6.33 (161)
5.9 (150)
6.33 (161)
5.05 (128.5)
5.31 (135)
5.31 (135)
5.31 (135)
Version A05
–
–
LE2D095, LE2D125, LE2D185, LE2D255
0.15 x 0.20
0.74 (19) 4.72
120
3.3
84
6.88
5.74
146
175
Dual Dimensions: Inches
mm
LE1D805 and D955
LE2D405 to D655
LE2D805 and D955
0.15 x 0.3
0.15 x 0.3
c1
=
8.85
225
=
=
4.49
=
c1
165
14.61
367
10.1
257
c1
LE1D
c1
LE2D
Standard version
Version A04
6.9 (176)
6.5 (165)
6.9 (176)
–
6.9 (176)
6.5 (165)
–
Standard version
Version A04
7.6 (194)
7.48 (190)
7.6 (194)
Version A05
Version A05
Version A11
6.9 (176)
Knock-outs or Blanking Plugs for Cable Glands
At top
At bottom
Type of Enclosure
PG
ISO
PG
ISO
LE1D09 and D12
2 x 13 or 2 x 16
2 x 16 or 2 x 21
1 x 13 and 1 x 21
2 x 20 I
2 x 13 or 2 x 16
2 x 16 or 2 x 21
1 x 13 and 2 x 21
2 x 20 I
LE1D18 to D35 and LE2D09 to D35
LE2D405
2 x 20 I or 2 x 25 I
1 x 20 I and 1 x 25 I
2 x 20 I or 2 x 25 I
1 x 20 I and 2 x 25 I
LE1D405 to D655 and LE2D505 and
D655
1 x 13 and 1 x 29
1 x 20 I and 1 x 32 I
1 x 13 and 2 x 29
1 x 20 I and 2 x 32 I
LE1 or LE2D805 and D955
LE2K
1 x 13 and 1 x 36
2 x 13 and 2 x 16
1 x 20 I and 1 x 40 I
4 x 20 I
1 x 13 and 2 x 36
2 x 13 and 2 x 16
1 x 20 I and 2 x 40 I
4 x 20 I
(millimeters x 0.0394 = inches)
167
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ D-Line Contactors and Starters
LE·D Dimensions (International Applications Only)
Enclosed D-line Starters With Fused Disconnect Switch
LE4K06 and K09
LE8K06 and K09
LE4D09 to D35
LE8D09 to D35
0.08 x 6.21
1.15 x 0.21
1.2
31
0.78
20
3.3
84
(1)
0.74
19
6.88
175
4.72
c1
120
c1
=
=
7.32
186
1.22
31
c1
c1
LE4K
5.74 (146)
–
LE8K
LE4D
LE8D
Standard version
Version A05
5.74 (146)
5.47 (139)
Standard version
Version A04
6.90 (175.5)
6.57 (167)
7.16 (182)
6.57 (167)
6.90 (175.5)
Version A05
6.90 (175.5)
(1) For LE8 only.
LE4D406 to D656
0.15 x 0.30
Dual Dimensions: Inches
mm
c1
Standard version
Version A04
7.91 (201)
7.48 (190)
7.91 (201)
c1
=
8.85
225
=
14.4
31
14.4
367
Version A05
LE2D406 to D806
LE4D806
=
2.9
a-75
=
1.2
31
LE2
a
D406, D506, D656 11.8 (300)
D806
15.7 (400)
LE4
a
D806
15.7 (400)
4xM8x25
c1‘
LE2D
8.58 (218)
8.58 (218)
–
LE4D
7.95
202
1.9
a-50
Standard version
Version A05
8.58 (218)
8.58 (218)
8.58 (218)
a
c1
2.26
a+57.5
Version A11
(1) + 14 mm with blankink plugs
Knock-outs or Blanking Plugs for Cable Glands
At top
At bottom
PG
Type of Enclosure
PG
ISO
ISO
2 x 13 or 2 x 16 or 2 x 20 I or 2 x 25 I or
2 x 13 or 2 x 16 or 2 x 20 I or 2 x 25 I or
LE4 and LE8D09 to D35
2 x 21 or 2 x 29
1 x 16 or 2 x 21
1 x 13 and 1 x 21
2 x 32 I or 2 x 40 I
2 x 20 I or 2 x 25 I
1 x 20 I and 1 x 25 I
1 x 20 I and 1 x 32 I
1 x 20 I and 1 x 40 I
4 x 20 I
2 x 21 or 2 x 29
2 x 16 or 2 x 21
1 x 13 and 2 x 21
1 x 13 and 2 x 29
1 x 13 and 2 x 36
2 x 13 and 2 x 16
2 x 32 I or 2 x 40 I
2 x 20 I or 2 x 25 I
1 x 20 I and 2 x 25 I
1 x 20 I and 2 x 32 I
1 x 20 I and 2 x 40 I
4 x 20 I
LE2D09 to D35
LE2D406 and LE4D406
LE1D506 to D656 and LE4D506 and D656 1 x 13 and 1 x 29
LE2D806 and LE4D806
LE4K, LE8K
1 x 13 and 1 x 36
2 x 13 and 2 x 16
(millimeters x 0.0394 = inches)
168
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ D-Line Contactors and Starters
LE·K Dimensions (International Applications Only)
LE·K Dimensions (International Applications Only)
Enclosed K-line Starters Without Fused Disconnect Switch
LE3K065, K095
LE3D09 to D35
0.07 x 0.21
0.74 (19)
4.72
0.15 x 0.20
120
5.74
146
3.3
84
6.88
175
c1
=
=
7.32
186
c1
Standard version
Version A04
6.90 (175.5)
6.57 (167)
Version A05
6.90 (175.5)
Dimensions shown in millimeters
(millimeters x 0.0394 = inches)
LE3D405 to D505
0.15 x 0.30
Dual Dimensions: Inches
mm
c1
Standard version
Version A05
7.48 (190)
7.63 (194)
7.63 (194)
c1
=
=
8.85
225
14.4
367
Version A06
LE3D805 to D150
=
a - 2.95
75
=
LE3
a
b
D805
D1155
D1505
15.7 (400)
19.6 (500)
19.6 (500)
15.7 (400)
23.6 (600)
23.6 9600)
0.15 x 0.31 x 0.98
c1
LE3D805
7.95 (202)
8.58 (218)
8.58 (218)
LE3D115, D150
9.92 (252)
–
Standard version
Version A05
c1
a - 1.96
50
c1 + 0.61
15.5
a
a + 2.26
57.5
Version A06
10.55 (268)
(1) + 14 mm with blankink plugs
Knock-outs or Blanking Plugs for Cable Glands
At top
At bottom
PG
Type of Enclosure
PG
ISO
2 x 13 or 2 x 16 or 2 x 20 I or 2 x 25 I or
2 x 21 or 2 x 29
ISO
LE3D09 to D35
2 x 13 or 2 x 16 or 2 x 21 or 2 x 29
2 x 20 I or 2 x 25 I or 2 x 32 I or 2 x 40 I
2 x 32 I or 2 x 40 I
LE3D405
LE3D505
LE3D805
LE3K
1 x 29
1 X 32 I
1 x 29, 2 x 13 and 2 x 21
1 x 36, 2 x 13 and 2 x 29
2 x 13 and 3 x 36
1 x 32 I, 2 x 20 I and 2 x 25 I
1 x 40 I, 2 x 20 I and 2 x 32 I
2 x 20 I and 3 x 40 I
1 x 36
1 x 40 I
1 x 36
1 x 40 I
2 x 13 and 2 x 16
4 x 20 I
2 x 13 and 2 x 16
4 x 20 I
(millimeters x 0.0394 = inches)
169
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ D-Line Contactors and Starters
LG1K and LG1D Dimensions (International Applications Only)
Starters Without Isolator
LE6D09 to D18
LE3D326
0.07 x 0.21
0.15 x 0.30
7.48
190
=
=
7.67
195
c1
=
=
11.29
287
1.2
31
7.32
186
1.2
31
c1
Standard version
Version A04
6.90 (175.5)
6.57 (167)
Version A05
6.90 (175.5)
LE3D406 to D806
=
a-2.9
75
=
1.2
31
0.15 x 0.31 x 0.98
4xM8x25
c1
Dual Dimensions: Inches
a-1.96
50
mm
a
LE3
a
b
c1
a+57.5
2.26
D406, D506
D806
15.7 (400)
19.6 (500)
19.6 (500)
27.5 (700)
8.58 (218)
10.6 (269)
(1) + 14 mm with blankink plugs
Knock-outs or Blanking Plugs for Cable Glands
At top
At bottom
PG
Type of Enclosure
PG
ISO
ISO
2 x 13 or 2 x 16 or 2 x 20 I or 2 x 25 I or
LE6D09 to D18
2 x 13 or 2 x 16 or 2 x 21 or 2 x 29
2 x 20 I or 2 x 25 I or 2 x 32 I or 2 x 40 I
2 x 21 or 2 x 29
1 x 21
2 x 32 I or 2 x 40 I
1 X 32 I
LE3D326
LE3D406
LE3D506
LE3D806
2 x 13, 2 x 16 and 1 x 21
2 x 13, 2 x 21 and 1 x 29
2 x 13, 2 x 29 and 1 x 36
2 x 13 and 3 x 36
2 x 20 I, 2 x 25 I and 1 x 32 I
2 x 20 I, 2 x 25 I and 1 x 32 I
1 x 40 I, 2 x 20 I and 2 x 32 I
2 x 20 I and 3 x 40 I
1 x 29
1 X 32 I
1 x 36
1 x 40 I
1 x 36
1 x 40 I
(millimeters x 0.0394 = inches)
170
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ D-Line Contactors and Starters
LE1K and LE1D Wiring Diagrams (International Applications Only)
LE1K and LE1D Wiring Diagrams (International Applications Only)
LE1D09 to D955
LE1D09 to D955
Form A04 or A05
A
A
– KM1
O
I
– KM1
– KM1
– KM1
– KM1
B
B
LE2K06, K09
LE2K06, K09
Form A05
A
A
R
O
– KM1
– KM2
– KM1
– KM2
– KM2
– KM1
– KM2
– KM1
– KM1
– KM2
– KM1
– KM2
B
B
LE2D405 to D955
LE2D09 to D955 with Forms A04 or A05
LE2D09 to D955
LE2D09 to D35
A
A
R
I
II
– S1
– KM1
– KM2
– KM2
– KM2
– KM1
– KM1
– KM2
– KM1
– KM2
– KM1
– KM1
– KM1
– KM2
– KM2
B
B
Connections
220 V, 230 V, 240 V
A
B
LE2K, LE1 and LE2D09 and D12
LE1 and LE2D18 to D955
L3
L3
L3
Neutral
Neutral terminal
L1
380 V, 400 V, 415 V, 440 V All products
Other voltages LE1 and LE2D09 to D35
Terminal 1
Terminal 2
Direct connection
LE2K, LE1 and LE2D405 and D955 Direct connection
171
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ D-Line Contactors and Starters
LE2K and LE2D Wiring Diagrams (International Applications Only)
LE2K and LE2D Wiring Diagrams (International Applications Only)
LE6D09 to D18
LE6D09 to D18
Recommended cabling for reversal of
motor rotation (standard motor, viewed
from shaft end).
A
Q1
Q1
– Q1
O
– KM3
– KM1
– KM2
l
– KM2
– KM1
– KM2
– KM2
– KM3
– KM1
– KM1
– KM2
– KM3
B
LE3D326 t0 D806
LE3D326 to D806
Recommended cabling for reversal of
motor rotation (standard motor, viewed
from shaft end).
A
– F1
Q1
– Q1
– KM3
– KM1
– KM2
– KM2
– KM1
– KM2
– KM2
– KM3
– KM1
– KM1
– KM2
– KM3
B
Connections
A
B
220 V, 230 V, 240 V
LE6D09 and D12
L3
Neutral
LE6D18 to LE3D806
L3
Neutral terminal
L1
380 V, 400 V, 415 V, 440 V All products
L3
Other voltages
LE6D09 to D18
Terminal 1
Direct connection
Terminal 2
LE3D326 to D806
Direct connection
172
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ D-Line Contactors and Starters
LE4K, LE4D, LE8K, and LE2D Dimensions (International Applications Only)
LE3K065 and K095
LE3K065 and K095
A
O
– KM2
– KM3
– KM1
I
– KM2
– KM1
– KM3
T
– KM1
Recommended
cabling for
reversal of motor
rotation (standard
motor, viewed
from shaft end).
T
– KM1
– KM3
– KM2
B
Y
L
LE3D09 to D805
LE3D09 to D35
LE3D405 to D805
A
A
O
Ð KM2
Ð KM3
Ð KM1
– KM2
I
– KM2
– KM1
– KM1
– KM2
– KM2
– KM2
– KM3
– KM1
– KM2
Recommended
cabling for
– KM3
– KM1
– KM1
– KM1
reversal of motor
rotation (standard
motor, viewed
from shaft end).
– KM2
– KM3
– KM2
– KM3
B
B
Y
Y
L
L
Note: In accordance with current installation regulations, short-circuit protection must be provided by fused or a circuit-breaker.
LE3D115 and D150
LE3D115 and D150
A
Ð KM2
Ð KM3
Ð KM1
– KM2
– KM1
– KM1
– KM1
– KM2
– KM3
Recommended
cabling for
reversal of motor
rotation (standard
motor, viewed
from shaft end).
– KM2
– KA1
– KA1
– KM3
– F2
– KM1
– KM2
B
Y
L
Connections
220 V, 230 V, 240 V
A
B
LD09 and D12
L3
Neutral
LE3D18 to D150
L3
Neutral terminal
L1
380 V, 400 V, 415 V, 440 V All products
Other voltages LE3D09 to D35
LE3K and LE3D405 to D150
L3
Terminal 1
Direct connection
Terminal 2
Direct connection
173
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ D-Line Contactors and Starters
LG1K, LG1D, LG7K, LG7D, and LG8K Dimensions (International Applications Only)
LG1K, LG1D, LG7K, LG7D, and LG8K Dimensions (International Applications Only)
LE4K06, K09
LE4K06, K09
LE4D09 to D35
LE4D406 to D656
LE4D806
LE4D09 to D806
LE4D09 to D656 with Form A04
or A05
A
A
A
A
Q1
Q1
– F1
Q1
– F1
– Q1
Q1
– KM1
I
O
O
– KM1
O
– KM1
– KM1
– KM1
l
– KM1
I
– KM1
– KM1
– KM1
B
B
B
B
LE8K06, K09
LE8K06, K09
Form A05
A
A
– Q1
R
– Q1
O
– KM1
– KM2
– KM1
– KM2
– KM2
– KM1
– KM2
– KM1
– KM1
– KM2
– KM1
– KM2
B
B
LE8D09 to LE2D806
LE8D09 to D35
LE2D406 to D806
A
A
Q1
Q1
Q1
– F1
– Q1
O
I
II
– S1
– KM1
– KM2
– KM2
– KM1
– KM2
– KM1
– KM2
– KM2
– KM1
– KM1
– KM1
– KM2
– KM1
– KM2
B
B
A
Connections
220 V, 230 V, 240 V
B
LE4 and LE8K, LE4 and LE8D09
and D12
L3
Neutral
LE4D18 to D806, LE8D18 to D35
and LE2D406 to D806
L3
Neutral terminal
380 V, 400 V, 415 V, 440 V
Other voltages
All products
L3
L1
LE4 and LE8D09 to D35
LE4 and LE2D406 and D806
Terminal 1
Direct connection
Terminal 2
Direct connection
174
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ D-Line Contactors and Starters
Cross-Reference Table
Cross-Reference Table
3-Pole AC Contactors(1)
Connection
for Cables with or without Cable End
for Ring Terminal Type
for Slip on Connectors
Old Catalog No.
LC1D0900
LC1D0910
LC1D0901
LC1D1200
LC1D1210
LC1D1201
LC1D1800
LC1D1810
LC1D1801
LC1D2500
LC1D2510
LC1D2501
LC1D3200
LC1D3210
LC1D3201
LC1D3810
LC1D3801
LC1D4011
LC1D5011
LC1D6511
LC1D8011
LC1D9511
LC1D11500
LC1D15000
New Catalog No.
LC1D09
LC1D09
LC1D09
LC1D12
LC1D12
LC1D12
LC1D18
LC1D18
LC1D18
LC1D25
LC1D25
LC1D25
LC1D32
LC1D32
LC1D32
LC1D38
LC1D38
LC1D40
LC1D50
LC1D65
LC1D80
LC1D95
LC1D115
LC1D150
Old Catalog No.
LC1D09006
LC1D09106
LC1D09016
LC1D12006
LC1D12106
LC1D12016
LC1D18006
LC1D18106
LC1D18016
LC1D25006
LC1D25106
LC1D25016
LC1D32006
LC1D32106
LC1D32016
LC1D38106
LC1D38016
LC1D40116
LC1D50116
LC1D65116
LC1D80116
LC1D95116
LC1D115006
LC1D150006
New Catalog No.
LC1D096
LC1D096
LC1D096
LC1D126
LC1D126
LC1D126
LC1D186
LC1D186
LC1D186
LC1D256
LC1D256
LC1D256
LC1D326
LC1D326
LC1D326
LC1D386
LC1D386
LC1D406
LC1D506
LC1D656
LC1D806
LC1D956
LC1D1156
LC1D1506
Old Catalog No.
LC1D09009
LC1D09109
LC1D09019
LC1D12009
LC1D12109
LC1D12019
New Catalog No.
LC1D099
LC1D099
LC1D099
LC1D129
LC1D129
LC1D129
4-Pole AC Contactors (1)
LC1D12004
LC1D12008
LC1D25004
LC1D25008
LC1DT25
LC1D128
LC1DT40
LC1D258
LC1D120046
LC1D120086
LC1D250046
LC1D250086
LC1DT256
LC1D1286
LC1DT406
LC1D2586
(1) Coil voltages: codes to be added to the end of the new catalog numbers
Volts - 50/60 Hz
Voltage Code
24
B7
48
E7
220
M7
230
P7
380
Q7
400
V7
3-Pole DC Contactors (2)
LP1D0910
LP1D0901
LP1D1210
LP1D1201
LP1D1810
LP1D1801
LP1D2510
LP1D2501
LP1D3210
LP1D3201
LP1D4011
LP1D5011
LP1D6511
LP1D8011
LP1D11500
LP1D15000
LC1D09
LC1D09
LC1D12
LC1D12
LC1D18
LC1D18
LC1D25
LC1D25
LC1D32
LC1D32
LC1D40
LC1D50
LC1D65
LC1D80
LC1D115
LC1D150
LP1D09106
LP1D09016
LP1D12106
LP1D12016
LP1D18106
LP1D18016
LP1D25106
LP1D25016
LP1D32106
LP1D32016
LP1D40116
LP1D50116
LP1D65116
LP1D80116
LC1D096
LP1D09109
LP1D09019
LP1D12109
LP1D12019
LC1D099
LC1D099
LC1D129
LC1D129
LC1D096
LC1D126
LC1D126
LC1D186
LC1D186
LC1D256
LC1D256
LC1D326
LC1D326
LC1D406
LC1D506
LC1D656
LC1D806
LC1D1156
LC1D1506
LC1D115006
LC1D150006
4-Pole DC Contactors (2)
LP1D12004
LP1D12008
LP1D25004
LP1D25008
LC1DT25
LC1D128
LC1DT40
LC1D258
LC1D120046
LC1D120086
LC1D250046
LC1D250086
LC1DT256
LC1D1286
LC1DT406
LC1D2586
(2) Coil voltages: codes to be added to the end of the new catalog numbers
Volts dc
24
48
72
Voltage Code
BD
ED
SD
175
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ D-Line Contactors and Starters
Cross-Reference Table
3-Pole Contactors, Low Consumption (1)
Connection
for Cables with or without Cable End
for Lugs or Bars
Old Catalog No.
for Faston Connectors
Old Catalog No.
LP4D0910
New Catalog No.
LC1D09
New Catalog No.
Old Catalog No.
New Catalog No.
LP4D0901
LC1D09
LP4D1210
LC1D12
LP4D1201
LC1D12
LP4D1810
LC1D18
LP4D1801
LC1D18
LP4D2500
LC1D25
3-Pole Reversing Contactors, Low Consumption (1)
LP5D0910
LP5D1210
LP5D1810
LP5D2500
LC2D09
LC2D12
LC2D18
LC2D25
(1) Coil voltages: codes to be added to the end of the new catalog numbers
Low Consumption Volts
Code
24
BL
48
72
EL
SL
3-Pole Reversing Contactors, AC
LC2D0901
LC2D1201
LC2D1801
LC2D2501
LC2D3201
LC2D3801
LC2D4011
LC2D5011
LC2D6511
LC2D8011
LC2D9511
LC2D11500
LC2D15000
LC2D09
LC2D12
LC2D18
LC2D25
LC2D32
LC2D38
LC2D40
LC2D50
LC2D65
LC2D80
LC2D95
LC2D115
LC2D150
LC2D09016
LC2D12016
LC2D18016
LC2D25016
LC2D32016
LC2D38016
LC2D115006
LC2D150006
LC2D096
LC2D126
LC2D186
LC2D256
LC2D326
LC2D386
LC2D1156
LC2D1506
LC2D09019
LC2D12019
LC2D099
LC2D129
4-Pole Changeover Contactors, AC
LC2D12004
LC2DT25
LC2D120046
LC2DT256
LC2DT406
LC2D25004
LC2DT40
LC2D250046
3-Pole Reversing Contactors, DC
LP2D0901
LP2D1201
LP2D1801
LP2D2501
LP2D3201
LC2D09
LC2D12
LC2D18
LC2D25
LC2D32
LP2D09016
LP2D12016
LP2D18016
LP2D25016
LP2D32016
LC2D0906
LC2D126
LC2D186
LC2D256
LC2D326
LP2D09109
LP2D12019
LC2D099
LC2D129
4-Pole Changeover Contactors, DC
LP2D12004
LC2DT25
LP2D120046
LC2DT256
LC2DT406
LP2D25004
LC2DT40
LP2D250046
Contact Blocks
LA1DN10
LA1DN01
LA1DN11
LA1DN20
LA1DN02
LA8DN11
LA8DN20
LA1DN22
LA1DN13
LA1DN40
LA1DN04
LA1DN31
LA1DC22
LADN10
LADN01
LADN11
LADN20
LADN02
LAD8N11
LAD8N20
LADN22
LADN13
LADN40
LADN04
LADN31
LADC22
LA1DN11M
LA1DN11P
LA1DN11G
LA1DN22M
LA1DN13M
LA1DN31M
LA1DN22P
LA1DN13P
LA1DN31P
LA1DN22G
LN1DN11
LA1DN11G
LADN11P
LADN11G
LADN22G
LADN22G
LADN31G
LADN22P
LADN31P
LADN31P
LADN22G
LADN11
LA2DT0
LA2DT2
LA2DT4
LA2DS2
LA3DR0
LA3DR2
LA3DR4
LADT0
LADT2
LADT4
LADS2
LADR0
LADR2
LADR4
176
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ D-Line Contactors and Starters
Cross-Reference Table
Thermal Overload Relays
For Use with Unbalanced
(Single Phase) Loads
New Catalog No.
For Use with Balanced Loads
For Use on 1000V Supplies
Old Catalog No.
LR2D1301
LR2D1302
LR2D1303
LR2D1304
LR2D1305
LR2D1306
LR2D13X6
LR2D1307
LR2D1308
LR2D1310
LR2D1312
LR2D1314
LR2D1316
LR2D1321
LR2D1322
LR2D2353
LR2D2355
LR2D1508
LR2D1510
LR2D1512
LR2D1514
LR2D1516
LR2D1521
LR2D1522
New Catalog No.
LRD01
Old Catalog No.
LR3D1301
LR3D1302
LR3D1303
LR3D1304
LR3D1305
LR3D1306
LR3D13X6
LR3D1307
LR3D1308
LR3D1310
LR3D1312
LR3D1314
LR3D1316
LR3D1321
LR3D1322
LR3D2353
LR3D2355
Old Catalog No.
LR2D3301A66
LR2D3302A66
LR2D3303A66
LR2D3304A66
LR2D3305A66
LR2D3306A66
LR2D33X6A66
LR2D3307A66
LR2D3308A66
LR2D3310A66
LR2D3312A66
LR2D3314A66
LR2D3316A66
LR2D3321A66
LR2D3322A66
New Catalog No.
LR3D01
LR3D02
LR3D03
LR3D04
LR3D05
LR3D06
LR3D06
LR3D07
LR3D08
LR3D10
LR3D12
LR3D14
LR3D16
LR3D21
LR3D22
LR3D32
LR3D35
LRD3301A66
LRD3302A66
LRD3303A66
LRD3304A66
LRD3305A66
LRD3306A66
LRD33X6A66
LRD3307A66
LRD3308A66
LRD3310A66
LRD3312A66
LRD3314A66
LRD3316A66
LRD3321A66
LRD3322A66
LRD02
LRD03
LRD04
LRD05
LRD06
LRD06
LRD07
LRD08
LRD10
LRD12
LRD14
LRD16
LRD21
LRD22
LRD32
LRD35
LRD1508
LRD1510
LRD1512
LRD1514
LRD1516
LRD1521
LRD1522
LRD1530 (1)
or
LR2D2553
LRD1532 (1)
LRD3322
LRD3353
LRD3355
LRD3357
LRD3359
LRD3361
LRD3363
LRD3365
LRD4365
LRD4367
LRD4369
LR2D3322
LR2D3353
LR2D3355
LR2D3357
LR2D3359
LR2D3361
LR2D3363
LR2D3365
LR2D4365
LR2D4367
LR2D4369
LR3D3322
LR3D3353
LR3D3355
LR3D3357
LR3D3359
LR3D3361
LR3D3363
LR3D3365
LR3D3322
LR3D3353
LR3D3355
LR3D3357
LR3D3359
LR3D3361
LR3D3363
LR3D3365
(1) Depends on actual Full Load Current.
177
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ D-Line Contactors and Starters
178
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ F-Line
Contactors, Overload Relays,
and Accessories
Catalog
File 8502
F-Line
04
CONTENTS
Description
Page
General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
Contactors
Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
Selection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188
Mechanical Interlocks and Power Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . 190
Auxiliary Contacts and Timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194
Accessories, and Spare Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196
F-line Voltage Code Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200
Replacement Coils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202
Dimensions and Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210
Schematics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216
Solid State Overload Relays
Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218
Selection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221
Dimensions and Mountings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .222
Wiring Diagrams and Special Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224
CR1F/CR1B Magnetic Latching Contactors
Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225
Selection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230
Accessories – Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231
Mechanical Interlocks and Power Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . 232
Coils and Spare Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234
Dimensions and Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239
Schematics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245
TeSys™ F-Line Contactors and Starters
180
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ F-Line Contactors and Starters
General Information
General Information
The F-line contactors and overload relays offer proven performance for resistive loads or large motor
starting applications such as fans, crushers, pumps, compressors and overhead cranes. They offer high
reliability with long mechanical and electrical life and the most complete line of accessories in the
industry.
Contactor Ratings
F-line contactors and overload relays are available in the USA market for inductive motor applications
up to 800 full load Amps and resistive loads up to 1000 Amps. They offer motor control and overload
protection for motors rated up to 800 horsepower at 480 Vac or 900 horsepower at 600 Vac.
•
•
•
•
•
2 pole, 3 pole and 4 pole Contactors and Magnetic Latching Contactors
AC or DC operating coils
Includes UL listing, CSA Certification and CE mark
Both North American and international terminal markings
Replacement parts available
— Contact Kits
— Arc Chambers
— Operating Coils
•
•
Easily installed accessories
— Auxiliary contact blocks with serrated wiping action
— Front mount dust tight auxiliary contact blocks
— Pneumatic time delay blocks
Solid State Overload Relays
Class 10 or class 20 overload relays are available from 30 to 630 Amperes. They are ambient
compensated and include single phase sensitivity for phase unbalance and phase loss protection. They
also include the following features: Isolated N.C. trip contact, N.O. alarm contact, manual reset button,
rotary dial for adjustable current settings with tamper resistant window, test trip button, momentary stop
button and trip indicator.
181
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ F-Line Contactors and Starters
Characteristics
Characteristics
Contactors Type LC1F (115 to 800A)
Control Circuit: AC or DC Supply
Type
LC1F115
LC1F150
LC1F185
LC1F225
LC1F265
Environment
Conforming to
IEC 60947-4-1/IEC 60947-4
V
1000
1500
8
1000
1500
8
1000
1500
8
1000
1500
8
1000
1500
8
Rated insulation voltage (Vi)
Conforming to VDE 0110 gr C
V
Test with coil not
connected to the power circuit
Rated impulse withstand voltage (Vimp)
kV
Meets the essential
requirements of the LV &
EMC directives
Conforming to standards
IEC 60947-4, NFC 63-110, VDE 0660, BS 5424, JEM 1038
ASE, CSA, UL, BV, GL, LROS, USSR, NORSK VERITAS, RINA
E164862
NLDX
LR43364
3211 04
Approvals
Conforming to IEC 60529
Conforming to VDE 0106
Standard version
Storage
IP 20 front face with shrouds LA9F
Protection against direct finger contact with shrouds LA9F
“TH”
Degree of protection
Protective treatment
- 60 to + 80 °C (- 76 to +176 °F)
Ambient air temperature
around the device
Operation
- 5 to + 55 °C (23 to + 131 °F) for operation at 80 to 110% of nominal control voltage
- 40 to + 70 °C (- 40 to + 158 °F) for operation at nominal control voltage
3000 m (9800 ft.)
Permissible at Vc f
Without derating
Without derating
Contactor open
Contactor closed
Contactor open
Contactor closed
Maximum operating altitude
Operating positions
± 30° possible, in relation to normal vertical mounting plane
9 gn
13 gn
2 gn
6 gn
9 gn
13 gn
2 gn
6 gn
7 gn
15 gn
2 gn
5 gn
7 gn
15 gn
2 gn
5 gn
6 gn
15 gn
2 gn
5 gn
Shock resistance c
1/2 sine wave = 11 ms
Vibration resistance c
5 to 300 Hz
Pole Characteristics q
Number of poles
3 or 4
115
3 or 4
150
3 or 4
185
3 or 4
225
3 or 4
265
In AC-3, q ≤ 55 °C (131 °F)
In AC-1, q ≤ 40 °C (104 °F)
Up to
A
A
V
Hz
A
A
A
A
A
A
A
A
A
A
A
A
A
Rated operational current (Ie)
(Ve ≤ 440 V)
200
250
275
315
350
Rated operational voltage (Ve)
Frequency limits
1000
162/3 to 200
200
1000
162/3 to 200
250
1000
162/3 to 200
275
1000
162/3 to 200
315
1000
162/3 to 200
350
Of the operational current p
θ ≤ 40 °C (104 °F)
I rms to IEC 60947-4-1
up to 440 V
Conventional rated thermal current
Rated making capacity
1400
1300
1100
900
1700
1500
1200
1100
450
2100
1800
1600
1200
600
2460
2050
1850
1350
780
2940
2450
2200
1700
800
I rms
conforming to
IEC 60947-4-1
500 V
Rated breaking capacity
660 to 690 V
1000 V
400
For 1 s
1100
1100
1100
640
1200
1200
1200
700
1500
1500
1500
920
1800
1800
1800
1000
850
2200
2200
2200
1230
950
For 5 s
Permissible short time rating from cold
state, no current flowing for preceding 60
minutes
For 10 s
For 30 s
For 1 min
520
600
740
θ ≤ 40 °C (104 °F)
For 3 min
400
450
500
560
620
For 10 min
By circuit breaker
By fuses
320
350
400
440
480
Select in accordance with NEC and local codes
Max 400% of motor FLA
Short-circuit protection
Average impedance per pole
At Ith and 50 Hz
AC-3
mΩ
W
0.40
6
0.40
9
0.36
12
0.36
18
0.32
22
Power dissipation per pole for the above
operational currents
AC-1
W
18
10
25
26
35
39
Mechanical durability at nominal voltage Millions of operations
10
10
10
10
Maximum operating rate
≤ 55°C (131°F)
Cable size (min-max)
Lug
ops/HR 2400
2400
#6 to 3/0
DZ2FG
160
2400
#6 to 3/0
DZ2FG
160
2400
—
2400
AWG
#14 to 2/0
#6 to 300mcm
DZ2FH
310
Cabling
DZ2FF
89
—
Bolt lug to contactor
Wire pressure screw
lb.-in
lb.-in
—
Tightening torque using
DZ2F•• Lug
120
200
200
—
275
f
In these conditions, for ratings F115 to F225, it is recommended to use LX9F coils.
In the least favorable direction, without change of contact state (coil at Vc).
Paralleling of poles must be carried out only in accordance with the fuse manufacturer's recommendations.
Sine wave without interference, above these values, please consult your Local Square D Field Sales Office.
c
q
p
182
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ F-Line Contactors and Starters
Characteristics
Contactors Type LC1F (115 to 800 A)
Control Circuit: AC or DC Supply
Type
LC1F330
LC1F400
LC1F500
LC1F630
LC1F780
LC1F800
Environment
Conforming to
IEC 60947-4-1/IEC 60947-4
V
1000
1500
8
1000
1500
8
1000
1500
8
1000
1500
8
1000
1500
8
1000
1500
8
Rated insulation voltage (Vi)
Conforming to VDE 0110 gr C
V
Test with coil not
connected to the power circuit
Rated impulse withstand voltage (Vimp)
kV
Meets the essential
requirements of the LV &
EMC directives
Conforming to standards
IEC 60947-4, NFC 63-110, VDE 0660, BS 5424, JEM 1038
E164862
NLDX
LR 43364
3211 04
Approvals
ASE, CSA C22.2 No.14, UL 508, BV, GL, LROS, USSR, NORSK VERITAS, RINA
Conforming to IEC 60529
Conforming to VDE 0106
Standard version
Storage
IP 20 front face with shrouds LA9F
Degree of protection
Protective treatment
Protection against direct finger contact with shrouds LA9F
“TH”
- 60 to + 80°C (- 76 to +176°F)
Ambient air temperature
around the device
Operation
- 5 to + 55°C (23 to + 131°F) for operation at 80 to 110% of nominal control voltage
Permissible at Vc
Without derating
Without derating
Contactor open
Contactor closed
Contactor open
Contactor closed
- 40 to + 70°C (- 40 to + 158°F) for operation at nominal control voltage
3000 m (9800 ft.)
-5 to +55°C (23-131 °F)
Maximum operating altitude
Operating positions
± 30° possible, in relation to normal vertical mounting plane
6 gn
15 gn
2 gn
5 gn
6 gn
9 gn
15 gn
2 gn
4 gn
6 gn
15 gn
2 gn
4 gn
5 gn
6 gn
15 gn
2 gn
4 gn
Shock resistance c
1/2 sine wave = 11 ms
15 gn
1.5 gn
5 gn
15 gn
2.5 gn
5.5 gn
Vibration resistance c
5 to 300 Hz
Pole Characteristics q
Number of poles
3 or 4
330
2, 3 or 4
400
2, 3 or 4
500
2, 3 or 4
630
3 or 4
780
3
In AC-3, q ≤ 55 °C (131 °F)
In AC-1, q ≤ 40 °C (104 °F)
Up to
A
A
V
Hz
A
A
A
A
A
A
A
A
A
A
A
A
A
800
Rated operational current (Ie)
(Ve ≤ 440 V)
400
500
700
1000
1000
162/3 to 200
1000
6740
6300
5400
4600
3200
5050
5050
5050
4400
3400
2200
1600
1600
1000
162/3 to 200
1600
8550
7100
6100
5200
3800
6250
6250
6250
5600
4600
3000
2200
1000
1000
162/3 to 200
1000
8200
7400
6200
5400
3850
5100
5100
5100
4400
3400
2200
1600
Rated operational voltage (Ve)
Frequency limits
1000
162/3 to 200
400
1000
162/3 to 200
500
1000
162/3 to 200
700
Of the operational current p
θ ≤ 40 °C (104 °F)
I rms to IEC 60947-4-1
up to 440 V
Conventional rated thermal current
Rated making capacity
3600
3000
2810
2350
1150
2650
2650
2650
1800
1300
900
4500
4000
3500
3050
1200
3600
3600
3600
2400
1700
1200
1000
5550
5000
4500
3560
2500
4200
4200
4200
3200
2400
1500
1200
I rms
conforming to
IEC 60947-4-1
500 V
Rated breaking capacity
660 to 690 V
1000 V
For 1 s
For 5 s
Permissible short time rating from cold
state, no current flowing for preceding 60
minutes
For 10 s
For 30 s
For 1 min
θ ≤ 40 °C (104 °F)
For 3 min
For 10 min
By circuit breaker
By fuses
750
Select in accordance with NEC and local codes
Max 400% of motor FLA
Short-circuit protection
Average impedance per pole
At Ith and 50 Hz
AC-3
mΩ
W
0.28
31
0.28
45
0.18
45
0.12
48
0.10
60
0.12
77
Power dissipation per pole for the above
operational currents
AC-1
W
44
70
88
120
5
250
5
120
5
Mechanical durability at nominal voltage Millions of operations
10
10
10
ops/
HR
Maximum operating rate
≤ 55°C (131°F)
2400
2400
2400
1200
1200
1200
2 x #2 to
600mcm
3 x#2 to
600mcm
4 x1/0 to
750mcm
Cable size (min-max)
AWG #6 to 300mcm #4 to 500mcm
3 x#2 to 600mcm
Cabling
Lug
DZ2FH
lb.-in 310
lb.-in 275
DZ2FJ
310
DZ2FK
310
DZ2FL
510
DZ2FX
510
DZ2FL
510
Bolt lug to contactor
Wire pressure screw
Tightening torque using
DZ2F•• Lug
500
500
500
500
500
c
q
p
In the least favorable direction, without change of contact state (coil at Vc).
Paralleling of poles must be carried out only in accordance with the fuse manufacturer's recommendations.
Sine wave without interference, above these values, please consult your Local Square D Field Sales Office.
183
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ F-Line Contactors and Starters
Characteristics
Contactors Type LC1F (115 to 800 A)
Control Circuit: AC Supply
Type
LC1F115
LC1F150
LC1F185
LC1F225
LC1F265
LC1F330
Control Circuit Characteristics (LX1/LX8 type coils)
Rated control circuit voltage (Vc) 50 or 60 Hz
V
24 to 1000
24 to 1000
24 to 1000
24 to 1000
48 to 1000
48 to 1000
Operational
Drop-out
0.85 to 1.1 Vc
0.85 to 1.1 Vc
0.85 to 1.1 Vc
0.85 to 1.1 Vc
–
–
–
–
50 or 60 Hz coils
0.35 to 0.55 Vc 0.35 to 0.55 Vc 0.35 to 0.55 Vc 0.35 to 0.55 Vc
Control voltage limits
(θ ≤ 55 °C [131 °F])
Operational
Drop-out
–
–
–
–
0.85 to 1.1 Vc 0.85 to 1.1 Vc
0.35 to 0.55 Vc 0.35 to 0.55 Vc
40 to 400 Hz coils
–
–
–
–
50 Hz coil
VA
550
–
550
–
805
–
805
–
–
–
AC 50 Hz
Inrush
40 to 400 Hz coil VA
Power factor
650
650
0.3
0.3
0.3
0.3
0.9
0.9
50 Hz coil
VA
45
45
55
55
–
–
AC 50 Hz
Sealed
40 to 400 Hz coil VA
Power factor
–
–
–
–
10
10
0.3
0.3
0.3
0.3
0.9
0.9
Average consumption
at 20 °C (68 °F) and at Vc
60 Hz coil
VA
660
–
660
–
970
–
970
–
–
–
AC 60 Hz
Inrush
40 to 400 Hz coil VA
Power factor
650
650
0.3
0.3
0.3
0.3
0.9
0.9
60 Hz coil
VA
55
55
66
66
–
–
AC 60 Hz
Sealed
40 to 400 Hz coil VA
–
–
–
–
10
10
Power factor
0.3
0.3
0.3
0.3
0.9
0.9
Heat dissipation
W
12 to 16
23 to 35
5 to 15
12 to 16
23 to 35
5 to 15
18 to 24
20 to 35
7 to 15
18 to 24
20 to 35
7 to 15
8
8
Closing “C”
ms
ms
40 to 65
100 to 170
40 to 65
100 to 170
Operating time c
Opening “O”
Mechanical durability to Vc
in millions of operating cycles
10
10
10
10
10
10
Maximum operating rate at ambient
temperature ≤ 55 °C (131 °F)
In operating cycles per hour
Solid or
2400
2400
2400
2400
2400
2400
Min/max
16/12
1 or 2 conductors AWG
16/12
1/4
16/12
1/4
16/12
1/4
16/12
1/4
16/12
1/4
stranded cable
Min/max c.s.a.
1/4
Stranded cable
without cable end
Cabling
1 or 2 conductors mm2
1 conductor
2 conductors
mm2
mm2
1/4
1/4
1/4
1/4
1/4
1/4
Stranded cable
with cable end
1/2.5
1/2.5
1/2.5
1/2.5
1/2.5
1/2.5
Solid cable
without cable end
1 or 2 conductors mm2
1/4
1/4
1/4
1/4
1/4
1/4
Tightening torque
N•m/lb-in 1.2/10
1.2/10
1.2/10
1.2/10
1.2/10
1.2/10
Mechanical latching
The LA6DK mechanical latch blocks cannot be mounted on LC1F contactors, for similar operation use CR1F magnetic latching contactors (see page 226).
c
The closing time “C” is measured from the moment the coil supply is switched on to initial contact of the main poles.
The opening time “O” is measured from the moment the coil supply is switched off to the moment the main poles separate.
184
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ F-Line Contactors and Starters
Characteristics
Contactors Type LC1F (115 to 800 A)
Control Circuit: AC Supply
Type
LC1F400
LC1F500
LC1F630
LC1F780
LC1F800
Control Circuit Characteristics (LX1/LX8 type coils)
Rated control circuit voltage (Vc)
50 or 60 Hz
V
48 to 1000
48 to 1000
48 to 1000
110 to 500
110 to 440
Operational
Drop-out
–
–
–
–
–
50 or 60 Hz coils
–
–
–
–
–
Control voltage limits
(θ ≤ 55 °C [131 °F])
Operational
Drop-out
0.85 to 1.1 Vc
0.85 to 1.1 Vc
0.85 to 1.1 Vc
0.85 to 1.1 Vc
0.7 to 1.3 Vc
40 to 400 Hz coils
0.3 to 0.5 Vc
0.3 to 0.5 Vc
0.25 to 0.5 Vc
0.2 to 0.4 Vc
0.3 to 0.5 Vc
50 Hz coil
VA
–
–
–
–
–
AC 50 Hz
Inrush
40 to 400 Hz coil VA
Power factor
1075
1100
1650
2100
1300
0.9
0.9
0.9
0.9
–
50 Hz coil
VA
–
–
–
–
–
AC 50 Hz
Sealed
40 to 400 Hz coil VA
Power factor
15
18
22
50
15
0.9
0.9
0.9
0.9
–
Average consumption
at 20 °C (68 °F) and at Vc
60 Hz coil
VA
–
–
–
–
–
AC 60 Hz
Inrush
40 to 400 Hz coil VA
Power factor
1075
1100
1650
2100
0.9
1300
0.9
0.9
0.9
–
60 Hz coil
VA
–
–
–
–
–
AC 60 Hz
Sealed
40 to 400 Hz coil VA
15
18
22
50
15
Power factor
0.9
0.9
0.9
0.9
–
Heat dissipation
W
14
18
20
2 x 22
40 to 80
130 to 230
25
Closing “C”
Opening “O”
ms
ms
40 to 75
100 to 170
40 to 75
100 to 170
40 to 80
100 to 200
40 to 80
20 to 40
Operating time c
Mechanical durability to Vc
in millions of operating cycles
10
10
5
5
5
Maximum operating rate at ambient
temperature ≤ 55 °C (131 °F)
In operating cycles per hour
Solid or
2400
2400
1200
600
600
Min/max
16/12
1 or 2 conductors AWG
16/12
1/4
16/12
1/4
16/12
1/4
16/12
1/4
stranded cable
Min/max c.s.a.
1/4
Stranded cable
without cable end
Cabling
1 or 2 conductors mm2
1 conductor
2 conductors
mm2
mm2
1/4
1/4
1/4
1/4
1/4
Strandedcablewith
cable end
1/2.5
1/2.5
1/2.5
1/2.5
1/2.5
Solid cable
without cable end
1 or 2 conductors mm2
1/4
1/4
1/4
1/4
1/4
Tightening torque
N•m/lb-in 1.2/10
1.2/10
1.2/10
1.2/10
1.2/10
Mechanical latching
The LA6DK mechanical latch blocks cannot be mounted on LC1F contactors, for similar operation use CR1F magnetic latching contactors (see page 226).
c
The closing time “C” is measured from the moment the coil supply is switched on to initial contact of the main poles.
The opening time “O” is measured from the moment the coil supply is switched off to the moment the main poles separate.
185
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ F-Line Contactors and Starters
Characteristics
Contactors Type LC1F (115 to 800 A)
Control Circuit: DC Supply
Type
LC1F115
LC1F150
LC1F185
LC1F225
LC1F265
LC1F330
Control Circuit Characteristics (LX4/LX8 type coils)
Rated control circuit voltage (Vc) DC
V
24 to 460
24 to 460
24 to 460
24 to 460
24 to 460
24 to 460
Operational
0.85 to 1.1 Vc 0.85 to 1.1 Vc 0.85 to 1.1 Vc 0.85 to 1.1 Vc 0.85 to 1.1 Vc 0.85 to 1.1 Vc
0.15 to 0.2 Vc 0.15 to 0.2 Vc 0.1 to 0.2 Vc 0.15 to 0.2 Vc 0.15 to 0.2 Vc 0.15 to 0.2 Vc
Control voltage limits
(θ ≤ 55 °C [131 °F])
Drop-out
Inrush
W
W
560
560
800
800
750
750
Average consumption
at 20 °C (68 °F) and at Vc
DC
Sealed
4.5
4.5
5
5
5
5
Closing “F”
ms
ms
30 to 40
30 to 50
30 to 40
30 to 50
30 to 40
30 to 50
30 to 40
30 to 50
40 to 50
40 to 65
40 to 50
40 to 65
Opening “O”
Average operating time c
Note: The arcing time depends on the circuit switched by the poles. For normal 3-phase applications, the arcing time is usually less than 10 ms. The load
is isolated from the supply after a time equal to the sum of the opening time and the arcing time.
Mechanical durability at Vc
In millions of operating cycles
In operating cycles/hour
10
10
10
10
10
10
Maximum operating rate at ambient
temperature ≤ 55 °C (131 °F)
2400
2400
2400
2400
2400
2400
Min/max
Solid or stranded cable 1 or 2 conductors AWG
16/12
16/12
16/12
16/12
16/12
16/12
Min/max c.s.a.
1 conductor
2 conductors
1 conductor
2 conductors
1 conductor
2 conductors
mm2
mm2
mm2
mm2
mm2
mm2
1/4
1/4
1/4
1/2.5
1/4
1/4
1/4
1/4
1/4
1/4
1/4
Strandedcablewithout
cable end
Cabling
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
Stranded cable with
cable end
1/2.5
1/4
1/2.5
1/4
1/2.5
1/4
1/2.5
1/4
1/2.5
1/4
Solid cable without
cable end
1/4
1/4
1/4
1/4
1/4
Tightening torque
N•m /lb-in 1.2/10
1.2/10
1.2/10
1.2/10
1.2/10
1.2/10
Mechanical latching
The LA6DK mechanical latch blocks cannot be mounted on LC1F contactors, for similar operation use CR1F magnetic latching contactors (see page 226).
c
Operating times depend on the type of contactor electromagnet and its control mode.
The closing time “C” is measured from the moment the coil supply is switched on to initial contact of the main poles.
The opening time “O” is measured from the moment the coil supply is switched off to the moment the main poles separate.
186
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ F-Line Contactors and Starters
Characteristics
Contactors Type LC1F (115 to 800 A)
Control Circuit: DC Supply
Type
LC1F400
LC1F500
LC1F630
LC1F780
LC1F800
Control Circuit Characteristics (LX4/LX8 type coils)
Rated control circuit voltage (Vc) DC
V
48 to 460
0.85 to 1.1 Vc
0.2 to 0.35 Vc
1000
48 to 460
0.85 to 1.1 Vc
0.2 to 0.35 Vc
1100
48 to 460
0.85 to 1.1 Vc
0.2 to 0.35 Vc
1600
110 to 460
0.85 to 1.1 Vc
0.2 to 0.4 Vc
2 x 1000
110 to 440
0.7 to 1.3 Vc
0.3 to 0.5 Vc
1300
Operational
Control voltage limits
(θ ≤ 55 °C [131 °F])
Drop-out
Inrush
W
W
Average consumption
at 20 °C (68 °F) and at Vc
DC
Sealed
6
6
9
2 x 21
15
Closing “F”
ms
ms
50 to 60
45 to 60
50 to 60
45 to 60
60 to 70
40 to 50
70 to 80
40 to 80
20 to 40
Opening “O”
100 to 130
Average operating time c
Note: The arcing time depends on the circuit switched by the poles. For normal 3-phase applications, the arcing time is usually less than 10 ms. The load
is isolated from the supply after a time equal to the sum of the opening time and the arcing time.
Mechanical durability at Vc
In millions of operating cycles
In operating cycles/hour
10
10
5
5
5
Maximum operating rate at ambient
temperature ≤ 55 °C (131 °F)
2400
2400
1200
600
600
Min/max
Solid or stranded cable 1 or 2 conductors AWG
16/12
16/12
16/12
16/12
16/12
Min/max c.s.a.
1 conductor
2 conductors
1 conductor
2 conductors
1 conductor
2 conductors
mm2
mm2
mm2
mm2
mm2
mm2
1/4
1/4
1/4
1/2.5
1/4
1/4
1/4
1/4
1/4
1/4
Strandedcablewithout
cable end
Cabling
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
Stranded cable with
cable end
1/2.5
1/4
1/2.5
1/4
1/2.5
1/4
1/2.5
1/4
Solid cable without
cable end
1/4
1/4
1/4
1/4
Tightening torque
N•m /lb-in 1.2/10
1.2/10
1.2/10
1.2/10
1.2/10
Mechanical latching
The LA6DK mechanical latch blocks cannot be mounted on LC1F contactors, for similar operation use CR1F magnetic latching contactors (see page 226).
c
Operating times depend on the type of contactor electromagnet and its control mode.
The closing time “C” is measured from the moment the coil supply is switched on to initial contact of the main poles.
The opening time “O” is measured from the moment the coil supply is switched off to the moment the main poles separate.
187
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ F-Line Contactors and Starters
Selection – Contactors
Selection - Contactors
Control Circuit: AC or DC
Kilowatt Ratings for International Applications
2-, 3-, and 4-Pole Contactors
Maximum current
(θ ≤ 40 °C [104 °F])
Catalog
Number
q p
Standard power ratings of 3-phase motors
50/60 Hz in category AC-3
AC-3
AC-1
Number
of poles
Weight lb (kg)
220 V
230 V
380 V
400 V
660 V
500 V
up to
400 V
up to
400 V
415 V
kW
440 V
kW
690 V
kW
1000 V
kW
Panel mount with screws c
kW
kW
kW
A
A
LC1F225
3
4
3
4
3
4
3
4
3
4
3
4
2
3
4
2
3
4
2
3
4
3
4
3
LC1F115••
LC1F1154••
LC1F150••
LC1F1504••
LC1F185••
LC1F1854••
LC1F225••
LC1F2254••
LC1F265••
LC1F2654••
LC1F330••
LC1F3304••
LC1F4002••
LC1F400••
LC1F4004••
LC1F5002••
LC1F500••
LC1F5004••
LC1F6302••
LC1F630••
LC1F6304••
LC1F780••
LC1F7804••
LC1F800••
7.56 (3.430)
8.44 (3.830)
7.56 (3.430)
8.44 (3.830)
10.2 (4.650)
12.0 (5.450)
10.5 (4.750)
12.2 (5.550)
16.4 (7.440)
18.8 (8.540)
18.9 (8.600)
20.9 (9.500)
17.6 (8.000)
20.0 (9.100)
22.5 (10.200)
21.5 (9.750)
25.0 (11.350)
28.5 (12.950)
34.2 (15.500)
41.0 (18.600)
47.4 (21.500)
87.1 (39.500)
105.8 (48.000)
41.3 (18.750)
30
55
59
59
75
80
65
115
200
40
75
80
80
90
100
110
129
160
220
65
150
185
225
265
330
250
275
315
350
400
55
90
100
110
140
180
100
110
140
200
110
129
160
200
100
100
147
160
63
110
132
160
75
100
110
147
200
200
250
335
220
280
375
250
295
400
257
355
400
280
335
450
185
335
450
400
500
630
500
LC1F630
700
1000
220
250
400
450
425
450
425
450
450
450
475
475
450
450
780
800
1600
1000
Note: For auxiliary contact blocks and modules (see pages 195 to 196).
c
q
p
The power terminals may be protected by the addition of shrouds, to be ordered separately except LC1F780. For power terminal lugs, see page 199.
Use voltage codes on page 200 “Voltage Codes Table” to complete catalog number.
The following coil types include one normally open holding circuit contact incorporated in the design of the coil for 3-wire control applications:
LX1FF, FG, FJ, FK, FL, LX1FX0422 to FH3802. The following coil types require an additional LA•DN1•, LADN2•, LADN31, or LADN4.
Auxiliary contact block: LX1FH0202 to 0362, LX1FH4402 to 10002, LX8F8•W, LX1FX, LX1FX, LX9FF, FG, LX9FH•••2, LX9FJ, FK, FL, LX4FF, FG FH,
FJ, FK, FL.
188
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ F-Line Contactors and Starters
Selection – Contactors
Control Circuit: AC or DC
Horsepower Ratings for North American Applications
2-, 3-, and 4-Pole Contactors
Maximum current
(θ ≤ 40 °C [104 °F])
Catalog
Number
q p
Standard power ratings of 3-phase motors
50/60 Hz in category AC-3
Number
of poles
AC-3
AC-1
Weight
lb (kg)
200 V
208 V
220 V
240 V
460 V
480 V
575 V
600 V
Panel mount with screws c
HP
HP
HP
HP
A
A
LC1F225
3
4
3
4
3
4
3
4
3
4
3
4
2
3
4
2
3
4
2
3
4
3
4
3
LC1F115••
LC1F1154••
LC1F150••
LC1F1504••
LC1F185••
LC1F1854••
LC1F225••
LC1F2254••
LC1F265••
LC1F2654••
LC1F330••
LC1F3304••
LC1F4002••
LC1F400••
LC1F4004••
LC1F5002••
LC1F500••
LC1F5004••
LC1F6302••
LC1F630••
LC1F6304••
LC1F780••
LC1F7804••
LC1F800••
7.56 (3.430)
8.44 (3.830)
7.56 (3.430)
8.44 (3.830)
10.2 (4.650)
12.0 (5.450)
10.5 (4.750)
12.2 (5.550)
16.4 (7.440)
18.8 (8.540)
18.9 (8.600)
20.9 (9.500)
17.6 (8.000)
20.0 (9.100)
22.5 (10.200)
21.5 (9.750)
25.0 (11.350)
28.5 (12.950)
34.2 (15.500)
41.0 (18.600)
47.4 (21.500)
87.1 (39.500)
105.8 (48.000)
41.3 (18.750)
30
40
75
100
115
200
40
50
60
100
125
125
150
150
185
225
265
330
250
275
315
350
400
50
Current Rated
60
75
75
150
200
175
250
100
100
150
250
125
200
300
250
400
600
300
500
800
400
500
630
500
LC1F630
700
1000
Current Rated
—
780
800
1600
1000
450
800
900
Note: For auxiliary contact blocks and modules (see pages 195 to 196).
c
q
p
The power terminals may be protected by the addition of shrouds, to be ordered separately except LC1F780. For power terminal lugs, see page 199.
Use voltage codes on page 200 “Voltage Codes Table” to complete catalog number.
The following coil types include one normally open holding circuit contact incorporated in the design of the coil for 3-wire control applications:
LX1FF, FG, FJ, FK, FL, LX1FX0422 to FH3802. The following coil types require an additional LA•DN1•, LADN2•, LADN31, or LADN4.
Auxiliary contact block: LX1FH0202 to 0362, LX1FH4402 to 10002, LX8F8•W, LX1FX, LX1FX, LX9FF, FG, LX9FH•••2, LX9FJ, FK, FL, LX4FF, FG FH,
FJ, FK, FL.
189
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ F-Line Contactors and Starters
Mechanical Interlocks and Power Connections
Mechanical Interlocks and Power Connections
Components for Assembling 3-Pole Reversing Contactors
and Changeover Contactor Pairs, for Customer Assembly
Horizontally mounted
Mechanical interlocks
Sets of power connections
Reversers assembled
using 2 contactors of
identical rating, type:
Reversing contactors
3-pole changeover contactor pairs c
LA9F•••82
LA9F•970
LA9F•••76
LC1F115
LC1F150
LC1F185
LC1F225
LC1F265
LC1F330
LC1F400
LC1F500
LC1F630
LC1F800
Vertically mounted
Mechanical interlocks
LA9FH4H
LA9FJ4J
LA9FK4K
LA9FL4L
Reversers assembled
using 2 contactors of
identical rating, type:
LA9FF4F
LA9FG4G
LC1F115
LC1F150
LC1F185
LC1F225
LC1F265
LC1F330
LC1F400
LC1F500
LC1F630
LC1F800
LC1F780
LA9FX970
c
For 4-pole changeover contactor pairs, see pages 193 and 194.
190
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ F-Line Contactors and Starters
Mechanical Interlocks and Power Connections
Components for Assembling 3-Pole Reversing Contactors
and Changeover Contactor Pairs, for Customer Assembly.
How to order:
Components are available for customer assembly of F-line reversing contactors and changeover contactors. For
example the following components must be ordered to build a 75 HP @ 460 V reversing contactor with a
120 V/60 Hz coil:
Quantity
Catalog number
LC1F115G6
DZ2FF1
Description
Contactors
2
6
2
1
1
Lugs
LA1DN•1
Auxiliary Contact Block
Power Connections
Mechanical Interlock
LA9FF976
LA9FF970
Using 2 contactors of identical rating
Set of power connections
Catalog Number Weight lb (kg)
Mechanical interlock
Contactor Type c
Kit Catalog Number Weight lb (kg)
For assembly of 3-pole reversing contactors for motor control
Horizontally mounted
LC1F115
LC1F150
LA9FF976
LA9F15076
LA9FG976
LA9F22576
LA9FH976
LA9FJ976
LA9FJ976
LA9FK976
LA9FL976
1.3 (0.600)
1.3 (0.600)
1.7 (0.780)
3.3 (1.500)
3.3 (1.500)
4.6 (2.100)
4.6 (2.100)
5.2 (2.350)
(8.4 3.800)
LA9FF970
LA9FF970
LA9FG970
LA9FG970
LA9FJ970
LA9FJ970
LA9FJ970
LA9FJ970
LA9FL970
0.13 (0.060)
0.13 (0.060)
0.13 (0.060)
0.13 (0.060)
0.31 (0.140)
0.31 (0.140)
0.31 (0.140)
0.31 (0.140)
0.33 (0.150)
LC1F185
LC1F225
LC1F265
LC1F330
LC1F400
LC1F500
LC1F630 or F800
Vertically mounted
LC1F115 or F150
LC1F185
k
k
k
k
k
k
k
q
–
–
–
–
–
–
–
–
LA9FF4F
LA9FG4G
LA9FG4G
LA9FH4H
LA9FJ4J
0.76 (0.345)
0.77 (0.350)
0.77 (0.350)
2.34 (1.060)
2.64 (1.200)
2.64 (1.200)
2.64 (1.220)
13.4 (6.100)
LC1F225
LC1F265 or F330
LC1F400
LC1F500
LA9FK4K
LA9FL4L
LA9FX970 q
LC1F630 or F800
LC1F780
For assembly of 3-pole changeover contactor pairs f
Horizontally mounted
LC1F115
LC1F150
LA9FF982
LA9F15082
LA9FG982
LA9F22582
LA9FH982
LA9FJ982
LA9FJ982
LA9FK982
LA9FL982
1.0 (0.460)
1.0 (0.460)
1.3 (0.610)
2.6 (1.200)
2.6 (1.200)
4.0 (1.800)
4.0 (1.800)
5.1 (2.300)
7.5 (3.400)
LA9FF970
LA9FF970
LA9FG970
LA9FG970
LA9FJ970
LA9FJ970
LA9FJ970
LA9FJ970
LA9FL970
0.13 (0.060)
0.13 (0.060)
0.13 (0.060)
0.13 (0.060)
0.31 (0.140)
0.31 (0.140)
0.31 (0.140)
0.31 (0.140)
0.33 (0.150)
LC1F185
LC1F225
LC1F265
LC1F330
LC1F400
LC1F500
LC1F630 or F800
Vertically mounted
LC1F115 or F150
LC1F185
k
k
k
k
k
k
k
p
–
–
–
–
–
–
–
–
LA9FF4F
LA9FG4G
LA9FG4G
LA9FH4H
LA9FJ4J
0.76 (0.345)
0.77 (0.350)
0.77 (0.350)
2.34 (1.060)
2.64 (1.200)
2.64 (1.200)
2.64 (1.220)
17.2 (7.800)
LC1F225
LC1F265 or F330
LC1F400
LC1F500
LA9FK4K
LA9FL4L
LA9FX970 p
LC1F630 or F800
LC1F780
c
To order the 2 contactors: see pages 188 and 189. Order 2 contact blocks LA1DN•1 to obtain electrical interlocking between the 2 contactors: see
pages 194 and 195.
k
q
f
All power connections are to be made by the customer, except for contactors type LC1F780.
Double mechanical interlock mechanism with 2 interlock connecting rods and 3 power connecting links.
For assembly of 4-pole changeover contactor pairs, see pages 192 and 193.
p
Double mechanical interlock mechanism with 2 interlock connecting rods and 4 power connecting links.
191
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ F-Line Contactors and Starters
Mechanical Interlocks and Power Connections
Components for Assembling 3- and 4-Pole Changeover Contactor Pairs, for Customer Assembly
Horizontally mounted
Mechanical interlocks
Sets of power connections
Reversers assembled
using 2 contactors of
identical rating, type:
4-pole changeover
contactor pairs c
LA9F•••77
LA9F•970
LC1F1154
LC1F1504
LC1F1854
LC1F2254
LC1F2654
LC1F3304
LC1F4004
LC1F5004
LC1F6304
Vertically mounted
Mechanical interlocks
Reversers assembled
using 2 contactors of
identical rating, type:
LA9FF4F
LA9FG4G
LA9FH4H
LA9FJ4J
LA9FK4K
LA9FL4L
LA9FX971
LC1F1154
LC1F1504
LC1F1854
LC1F2254
LC1F2654
LC1F3304
LC1F4004
LC1F5004
LC1F6304
Reversers assembled
using 2 contactors of
different ratings, type:
LA9FG4F
LA9FH4F
LA9FJ4F
LA9FK4F
LA9FL4F
LA9FH4G
LA9FJ4G
LA9FK4G
LA9FL4G
LA9FJ4H
LA9FK4H
LA9FL4K
LA9FK4J
LA9FL4J
LA9FL4K
LC1F115 or F1154
LC1F150 or F1504
LC1F185 or F1854
LC1F225 or F2254
LC1F265 or F2654
LC1F330 or F3304
LC1F400 or F4004
LC1F500 or F5004
LC1F630 or F6304
LC1F800
Reversers assembled using
3 contactors of identical or
different ratings, type:
LA9F•4•4•
LC1F115 or F1154
LC1F150 or F1504
LC1F185 or F1854
LC1F225 or F2254
LC1F265 or F2654
LC1F330 or F3304
LC1F400 or F4004
LC1F500 or F5004
LC1F630 or F6304
LC1F800
Warning: the contactor ratings must be in decreasing size from top to bottom
(largest size at top and smallest size at bottom).
c
For 3-pole changeover contactor pairs, see pages 190 and 191.
192
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ F-Line Contactors and Starters
Mechanical Interlocks and Power Connections
Components for Assembling 3 and 4-Pole Changeover Contactor Pairs, for Customer Assembly
For additional information see How to Order on page 191.
Using 2 contactors of identical rating
For assembly of 4-pole changeover contactor pairs
q
Set of power connections
Mechanical Interlock
Kit Catalog Number
Contactor Type c
Catalog Number
Weight lb (kg)
Weight lb (kg)
Horizontally mounted
LC1F1154
LA9FF977
LA9F15077
LA9FG977
LA9F22577
LA9FH977
LA9FJ977
LA9FJ977
LA9FK977
LA9FL977
1.0 (0.460)
1.0 (0.460)
1.3 (0.610)
2.6 (1.200)
2.6 (1.200)
4.0 (1.800)
4.0 (1.800)
5.1 (2.300)
7.5 (3.400)
LA9FF970
LA9FF970
LA9FG970
LA9FG970
LA9FJ970
LA9FJ970
LA9FJ970
LA9FJ970
LA9FL970
0.13 (0.060)
0.13 (0.060)
0.13 (0.060)
0.13 (0.060)
0.30 (0.140)
0.30 (0.140)
0.30 (0.140)
0.30 (0.140)
0.33 (0.150)
LC1F1504
LC1F1854
LC1F2254
LC1F2654
LC1F3304
LC1F4004
LC1F5004
LC1F6304
Vertically mounted
LC1F1154 or F1504
LC1F1854
k
k
k
k
k
k
k
f
–
–
–
–
–
–
–
–
LA9FF4F
LA9FG4G
LA9FG4G
LA9FH4H
LA9FJ4J
LA9FK4K
LA9FL4L
LA9FX971■
0.76 (0.345)
0.77 (0.350)
0.77 (0.350)
2.33 (1.060)
2.64 (1.200)
2.64 (1.200)
2.70 (1.220)
17.2 (7.800)
LC1F2254
LC1F2654 or F3304
LC1F4004
LC1F5004
LC1F6304
LC1F7804
Using 2 contactors of different ratings
For assembly of 3 or 4-pole changeover contactor pairs
Mechanical Interlock
Contactor Type c
Kit Catalog Number
Weight lb (kg)
Vertically mounted
at bottom
at top
LC1F185 or F1854
LC1F225 or F2254
LC1F265 or F2654
LC1F330 or F3304
LC1F400 or F4004
LC1F500 or F5004
LC1F630, F6304 or F800
LC1F265 or F2654
LC1F330 or F3304
LC1F400 or F4004
LC1F500 or F5004
LC1F630, F6304 or F800
LC1F400 or F4004
LC1F500 or F5004
LC1F630, F6304 or F800
LC1F500 or F5004
LC1F630, F6304 or F800
LC1F630, F6304 or F800
LA9FG4F
LA9FG4F
LA9FH4F
LA9FH4F
LA9FJ4F
LA9FK4F
LA9FL4F
LA9FH4G
LA9FH4G
LA9FJ4G
LA9FK4G
LA9FL4G
LA9FJ4H
LA9FK4H
LA9FL4H
LA9FK4J
LA9FL4J
LA9FL4K
0.77 (0.350)
0.77 (0.350)
1.92 (0.870)
1.92 0.870)
2.05 (0.930)
2.07 (0.940)
2.07 (0.940)
1.90 0.860)
1.90 (0.860)
2.07 (0.940)
2.07 (0.940)
2.09 (0.950)
2.50 (1.130)
2.50 (1.130)
2.51 (1.140)
2.64 (1.200)
2.70 (1.210)
2.70 (1.210)
LC1F115 or F1154
or
LC1F150 or F1504
LC1F185 or F1854
or
LC1F225 or F2254
LC1F265 or F2654
or
LC1F330 or F3304
LC1F400 or F4004
LC1F500 or F5004
q
c
For assembly of 3-pole changeover contactor pairs, see pages 190 and 191.
To order the 2 contactors: see pages 188 and 189. Order 2 contact blocks LADN•1 to obtain electrical interlocking between the 2 contactors: see
pages 194 and 195.
k
f
All power connections are to be made by the customer, except for contactors type LC1F780.
Double mechanical interlock mechanism with 2 interlock connecting rods and 4 power connecting links.
For assembly of reversers using 3 contactors, vertically mounted, see pages 191 and 192.
193
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ F-Line Contactors and Starters
Auxiliary Contacts and Timers
Auxiliary Contacts and Timers
aaa
LADN
LADN10
LADN01
LC1F
LADN
LADC
LADT
LADS
LADR
LA1DX, LA1DY, LA1DZ
194
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ F-Line Contactors and Starters
Auxiliary Contacts and Timers
Contactors and Reversing Contactors Type LC1F
Auxiliary Contact Blocks and Interface Module
Instantaneous Auxiliary Contact Blocks
For use in normal operating environments
Max. number of blocks per contactor
Auxiliary Contacts
Number of
contacts
Catalog Number
Weight lb (kg)
Side clip-on mounting
k
–
–
–
–
–
–
–
–
–
–
–
f
–
–
–
–
–
–
–
–
–
–
–
N.O. N.C.
1
–
1
2
–
2
1
4
–
3
2
–
LADN10
LADN01
LADN11
LADN20
LADN02
LADN22
LADN13
LADN40
LADN04
LADN31
LADC22
0.04 (0.020)
0.04 (0.020)
0.07 (0.030)
0.07 (0.030)
0.07 (0.030)
0.11 (0.050)
0.11 (0.050)
0.11 (0.050)
0.11 (0.050)
0.11 (0.050)
0.11 (0.050)
1
2
1
2
1
1
–
2
2
3
–
4
2
4
1
2 c
With terminal referencing conforming to standard EN 50012 l
–
–
–
–
–
–
–
–
1
1
2
2
1
1
2
2
LADN11P
LADN11G
LADN22P
LADN22G
0.07 (0.030)
0.07 (0.030)
0.11 (0.050)
0.11 (0.050)
2
2
4
2
l
See page 216 for actual markings.
Instantaneous Auxiliary Contact Blocks With Dust and Damp Protected Contacts
For use in harsh industrial environments
Max. number of blocks per contactor
Auxiliary Contacts
Number of
contacts
Catalog Number
Weight lb (kg)
Side clip-on mounting
k
2
2
2
2
f
–
2
–
–
N.O. N.C.
–
–
2
1
–
–
–
1
LA1DX20
LA1DY20
LA1DZ40
LA1DZ31
0.09 (0.040)
0.09 (0.040)
0.11 (0.050)
0.11 (0.050)
2
4
2
2
Time Delay Auxiliary Contacts
Max. number of blocks per contactor
Time delay
Type
Number of
Contacts
Catalog Number
Weight lb (kg)
Side clip-on mounting
Range (s)
0.1 to 3 q
0.1 to 30
10 to 180
1 to 30 p
0.1 to 3 q
0.1 to 30
10 to 180
LADT0
LADT2
LADT4
LADS2
LADR0
LADR2
LADR4
0.13 (0.060)
0.13 (0.060)
0.13 (0.060)
0.13 (0.060)
0.13 (0.060)
0.13 (0.060)
0.13 (0.060)
OnDelay
OffDelay
1 N.O.
+
1 N.C.
2
k
f
Sealed dust tight contacts.
Ground terminal connections.
c
q
p
Including 1 N.O. + 1 N.C. make before break.
With extended scale from 0.1 to 0.6 s.
With switching time of 40 ms ± 15 ms between opening of the N.C. contact and closing of the N.O. contact.
195
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ F-Line Contactors and Starters
Accessories and Spare Parts
Accessories and Spare Parts
LA9D09981
Contactors and Reversing Contactors Type LC1F
Suppressor Blocks and Cabling Accessories
Suppressor Blocks
Type of Suppressor
Specifications
Coil Voltage Range
24 - 48
Catalog Number
LA4FRCE
LA4FRCF
LA4FRCP
LA4FRCV
LA4FVE
Weight lb (kg)
0.07 (0.030)
0.07 (0.030)
0.07 (0.030)
0.07 (0.030)
0.07 (0.030)
0.07 (0.030)
0.07 (0.030)
0.07 (0.030)
0.07 (0.030)
0.07 (0.030)
0.07 (0.030)
0.07 (0.030)
0.07 (0.030)
0.07 (0.030)
0.07 (0.030)
0.07 (0.030)
0.02 (0.010)
Used on AC only
Limits transients to 3X Uc max.
Increases contactor drop out time 10 to 30 %
50 - 110
RC (Resistor-Capacitor)
127 - 240
265 - 415
24 - 48
LA9F980
50 - 110
LA4FVF
Used on AC or DC
Limits Transients to 2 X Uc max.
Varistor
127 - 240
265 - 415
24 - 48
LA4FVP
LA4FVV
LA4FTE
50 - 110
LA4FTF
Used on AC or DC
Limits Transients to 2.5 X Uc max.
Bi-directional Diode
127 - 240
265 - 415
24 - 48
LA4FTP
LA4FTV
LA4FDE
Used on DC only
No overvoltage
Polarity sensitive
Increases contactor drop out time 300-400%
55 - 110
LA4FDF
Diode
125 - 250
280 - 440
LA4FDP
LA4FDV
Mounting bracket (for 35mm DIN rail or panel mounting) for suppressor block
LA9D09981
LA9F•602
Cabling Accessories
Links for parallel connection of poles (in pairs)
Set of 4 links
For use on
4-pole contactors
Weight lb (kg)
Set Catalog Number
LA9FF602
LC1F1154
0.44 (0.200)
0.77 (0.350)
2.20 (1.000)
3.85 (1.750)
6.61 (3.000)
LC1F1504, F1854
LA9FG602
LC1F2254, F2654, F3304, F4004
LA9FH602
LC1F5004
LA9FK602
LC1F6304
LA9FL602
LA9F•601
Links for “star” connection of 3 poles
LC1F115
LA9FF601
LA9FG601
LA9FH601
LA9FK601
LA9FL601
0.08 (0.035)
0.11 (0.050)
0.26 (0.120)
0.40 (0.180)
1.21 (0.550)
LC1F150, F185
LC1F225, F265, F330, F400
LC1F500
LC1F630, F800
Control circuit voltage take-off from power terminals
DZ3FA3
For use on contactors
LC1F115
Mounted on bolt size
Sold in lots of
Unit Catalog Number
DZ3FA3
Weight lb (kg)
0.008 (0.004)
0.008 (0.004)
0.013 (0.006)
0.019 (0.009)
M6
10
10
10
10
LC1F150, F185
LC1F225 to F500
LC1F630, F800
M8
DZ3GA3
M10
M12
DZ3HA3
DZ3JA3
196
© 2001-2004 Schneider Electric All Rights Reserved
08/04
TeSys™ F-Line Contactors and Starters
Accessories and Spare Parts
Contactors and Reversing Contactors Type LC1F
Suppressor Blocks and Cabling Accessories
Right-Angled Connectors
For contactors or thermal overload relays
LA9F•981
For use on
Contactors
Connector
Thermal Overload Relays Width
Set of 3 Connectors
Set Catalog Number
LA9FF981
Type
Weight lb (kg)
0.13 (0.060)
0.53 (0.240)
0.33 (0.150)
0.18 (0.080)
0.77 (0.350)
0.44 (0.200)
0.95 (0.430)
1.65 (0.750)
1.08 (0.490)
1.06 (0.480)
2.03 (0.920)
1.76 (0.800)
2.67 (1.210)
5.66 (2.570)
7.03 (3.190)
Rear
LR•F5•67,
LR1F105, F125
0.59"
(15 mm)
LC1F115
Side
LA9FF979
Large s. area
Rear
LA9FF980
LA9FG981
LA9FG979
LA9FG980
LA9FJ981
0.79"
(20 mm)
LC1F150, F185
LR•F5•69, F5•71
Side
Large s. area
Rear
LC1F225, F265.
F330, F400
LR•F6•73, F6•75,
F6•77
0.98"
(25 mm)
Side
LA9FJ979
Large s. area
Rear
LA9FJ980
LA9FK981
LA9FK979
LA9FK980
LA9FL981
1.18"
(30 mm)
LC1F500
LR•F7•79, F7•81
LR•F8•83, F8•85
Side
Large s. area
Rear
1.57"
(40 mm)
LC1F630, F800
Side
LA9FL979
LA9F•979
Large s. area
LA9FL980
Connection Accessories
For reversing contactors or star-delta contactors combined with a thermal overload relay
For use on
Contactors
Set of 3 bus bars
Width of
Connector Plates
Thermal Overload Relays
Set Catalog Number
Weight lb (kg)
LR9F5357, F5363
F5367, F5369
LC1F115
0.59" (15 mm)
0.79" (20 mm)
0.98" (25 mm)
LA7F401
LA7F402
LA7F403
0.24 (0.110)
LC1F150
and F185
LR9F5357, F5363
F5367, F5369
0.24 (0.110)
0.35 (0.160)
LC1F225
and F265
LR9F5371
LC1F330
and F400
LR9F7375
and F7379
0.98" (25 mm)
0.98" (25 mm)
1.18" (30 mm)
1.57" (40 mm)
LA7F404
LA7F404
LA7F405
LA7F406
0.35 (0.160)
0.35 (0.160)
0.60 (0.270)
1.30 (0.600)
LC1F400
LC1F500
LC1F630
LR9F7381
LR9F7375, F7379
F7381
LA9F•980
LR9F7381
197
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ F-Line Contactors and Starters
Accessories and Spare Parts
Contactors and Reversing Contactors Type LC1F
Cabling Accessories and Spare Parts
Lug Kits
Lugs can be ordered either individually (for 2-pole and 4-pole contactors) or in sets of 6 (for 3-pole contactors).
Mounting hardware is provided with the contactors, not the kits.
DZ2F••
Suitable for contactor
LC1•••• / CR1••••
Suitable for overload relay
LR9••••• q
Single lug
Set of six lugs
Cable size AWG range
DZ2FF1
DZ2FG1
DZ2FH1
DZ2FJ1
DZ2FK1
DZ2FL• c
DZF2FX1
DZ2FF6
DZ2FG6
DZ2FH6
DZ2FJ6
DZ2FK6
DZ2FL6
DZ2FX6
14 to 2/0
F115
none
6 to 3/0
F150, F185
F265, F330
F400
F5•57, F5•63, F5•67, F5•69
6 to 300 MCM
4 to 500 MCM
2x2 to 600 MCM
3x2 to 600 MCM
4x1/0 to 750 MCM
LR9F•71
none
F500
F7•75, F7•79
F7•81
F630, F800
F780
none
Insulated Terminal Blocks
Set of 2 blocks
Cable Size
AWG Range
For use on 3-pole contactors
Set Catalog Number
Weight lb (kg)
LC1F115, F150, F185
(provides IP20 touch-safe protection)
#6 to 300 mcm
LA9F103
1.23 (0.560)
LA9F103
Power Terminal Protection Shrouds
These clear plastic protective shrouds are an effective means to meet international touch-safe requirements for power terminals. They are designed to be
used with power cables that have been bolted to the terminal. Note: The protection shrouds do not attach to contactors or overloads utilizing DZ2F lug kits.
For use with
2-, 3-, and 4-pole contactors
Number of shrouds per set Set Catalog Number
Weight lb (kg)
0.55 (0.250)
0.55 (0.250)
LC1F115
6
6
LA9F701
LA9F702
LC1F150, F185
CR1F150, F185
LC1F225, F265, F330, F400 and F4002, F500 and F5002
CR1F265, F400 and F500
6
6
LA9F703
LA9F704
0.55 (0.250)
0.55 (0.250)
LC1F630, F6302 and F800
CR1F630
LC1F1154
8
8
8
8
LA9F706
LA9F707
LA9F708
LA9F709
0.66 (0.300)
0.66 (0.300)
0.66 (0.300)
0.66 (0.300)
LC1F1504 and F1854
LC1F2254, F2654, F3304, F4004, F5004
LC1F6304
q
c
When direct mounting the LR9F to an LC1F or CR1F contactor, lugs of different sizes may be required. See page 220 for additional information.
For 3-pole F630 contactors, order DZ2FL1 for L1 and T3, DZ2FL2 for L2 and T2, and DZ2PL3 for L3 and T1 terminals.
For 4-pole F6304 contactors, order DZ2FL1 for L1 and T4, DZ2FL2 for L2, T2, L3 and T3, and DZ2FL3 for L4 and T1 terminals.
LA9F701
198
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ F-Line Contactors and Starters
Accessories and Spare Parts
Contactors and Reversing Contactors Type LC1F
Spare Parts
Main Contact Sets
Per pole: 2 stationary contacts and 1 moving contact, 2 deflectors, 1 leaf spring, screws and washers
For contactor
Type
Replacement for
2 poles
2 poles
2 poles
3 poles
3 poles
3 poles
3 poles
3 poles
3 poles
1 pole
Catalog Number
LA5F400802
LA5F500802
LA5F630802
LA5FF431
Weight lb (kg)
3.00 (1.350)
4.30 (1.950)
10.3 (4.700)
0.60 (0.270)
0.77 (0.350)
1.45 (0.660)
4.40 (2.000)
6.50 (2.950)
13.4 (6.100)
10.4 (4.700)
29.1 (13.200)
13.4 (6.100)
0.80 (0.360)
1.20 (0.465)
1.94 (0.880)
5.95 (2.700)
8.59 (3.900)
17.9 (8.150)
10.36 (4.700)
38.1 (17.300)
LC1F4002
LC1F5002
LC1F6302
LC1F115, F150
LC1F185, F225
LC1F265
2-pole
LA5FG431
LA5FG431
LA5FH431
LC1F330, F400
LC1F500
LA5F400803
LA5F500803
LA5F630803
LA5F780801 c
LA5F780803
LA5F800803
LA5FF441
3-pole
LC1F630
LC1F780
3 poles
3 poles
4 poles
4 poles
4 poles
4 poles
4 poles
4 poles
1 pole
LC1F800
LC1F1504, F1154
LC1F1854, F2254
LC1F2654
LA5FG441
LA5FH441
LC1F3304, F4004
LC1F5004
LA5F400804
LA5F500804
LA5F630804
LA5F780801 c
LA5F780804
4-pole
LC1F6304
LC1F7804
4 poles
Arc Chambers
For contactor
LA5F40050
Type
Replacement for
2 poles
2 poles
2 poles
3 poles
3 poles
3 poles
3 poles
3 poles
3 poles
3 poles
3 poles
3 poles
1 pole
Catalog Number
LA5F400250
LA5F500250
LA5F630250
LA5F11550
Weight lb (kg)
1.91 (0.870)
2.75 (1.250)
4.62 (2.100)
1.08 (0.490)
1.08 (0.490)
1.47 (0.670)
1.47 (0.670)
2.03 (0.920)
2.90 (1.300)
2.90 (1.300)
4.08 (1.850)
6.94 (3.150)
4.63 (2.100)
6.94 (3.150)
1.45 (0.660)
1.45 (0.660)
2.00 (0.910)
2.20 (1.000)
2.70 (1.220)
3.83 (1.740)
3.83 (1.740)
5.51 (2.500)
9.26 (4.200)
9.63 (2.100)
LC1F4002
LC1F5002
LC1F6302
LC1F115
LC1F150
LC1F185
LC1F225
LC1F265
LC1F330
LC1F400
LC1F500
LC1F630
LC1F780
LC1F800
LC1F1154
LC1F1504
LC1F1854
LC1F2254
LC1F2654
LC1F3304
LC1F4004
LC1F5004
LC1F6304
LC1F7804
2-pole
LA5F15050
LA5F18550
LA5F22550
LA5F26550
3-pole
LA5F33050
LA5F40050
LA5F50050
LA5F63050
LA5F780150 c
LA5F80050
3 poles
4 poles
4 poles
4 poles
4 poles
4 poles
4 poles
4 poles
4 poles
4 poles
1 pole
LA5F115450
LA5F150450
LA5F185450
LA5F225450
LA5F265450
LA5F330450
LA5F400450 f
LA5F500450 f
LA5F630450 q
LA5F780150 c
4-pole
c
f
q
Comprising 2 identical items per pole.
Comprising two 2-pole arc chambers.
Comprising single-pole arc chambers.
199
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ F-Line Contactors and Starters
F-line Voltage Code Table
F-line Voltage Code Table
F-line Voltage Code
F-line Voltage Code
F-line (see notes at end of table)
LC1F115 LC1F265 LC1F500
F-line (see notes at end of table)
LC1F115 LC1F265 LC1F500
LC1F780 LC1F800
Note F1, Note F1,
LC1F780 LC1F800
Note F1, Note F1,
Voltage Frequency
Voltage Frequency
- F225
Note F1, Note F1, Note F1,
F2 F2 F2
- F400
- F630
- F225
Note F1, Note F1, Note F1,
F2 F2 F2
- F400
- F630
F2
F2, F3
F2
F2, F3
5
Low
Consump DC
-
-
-
-
-
Low
96
-
-
-
-
-
Consump DC
50/60
50
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
50/60
-
-
-
-
-
-
-
-
-
100
DC
-
DC
50/60
50
-
-
-
-
-
12
Low
Consump DC
F5
F6
F7
FD
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
60
-
-
-
Wide Range
DC
40-400
F7
FD
F7
FD
F7
FD
-
110
DC
FW
50/60
50
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Low
Consump DC
-
-
-
-
-
-
-
-
-
-
60
20
Wide Range
DC
DC
Low
Consump DC
110/127
115
40-400
50/60
50
-
-
-
-
-
FE7
-
-
-
-
-
-
-
-
-
-
-
-
-
-
50/60
50
-
-
-
-
-
-
-
-
-
-
-
-
FE5
FE7
-
-
-
-
B5
B6
40-400
50/60
50
FE7
FE7
FE7
60
-
-
-
-
-
-
-
-
-
B7
Note F4
40-400
DC
-
BD
-
-
-
-
-
-
-
-
-
-
-
-
-
-
24
60
G6
-
BD
Note F4
G7
Note F5
120
40-400
DC
G7
F7
-
F7
-
-
FW
-
Low
Consump DC
-
-
-
-
-
Wide Range
DC
-
Low
Consump DC
-
-
-
50/60
DC
-
-
-
-
-
-
-
-
-
-
125
127
DC
50/60
60
GD
GD
GD
GD
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
G5
G7
-
-
-
-
36
42
Wide Range
DC
-
-
-
-
-
-
-
-
40-400
DC
G7
G7
G7
50/60
50
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
155
174
-
-
-
-
-
-
D5
-
-
-
-
-
DC
-
60
50/60
DC
-
-
-
-
50/60
50
-
-
-
200
-
-
-
-
E5
E6
E7
ED
-
-
50/60
60
-
-
-
-
60
-
-
200/208
L6
-
-
-
-
40-400
DC
E7
ED
E7
ED
48
40-400
50/60
60
L7
-
L7
-
L7
-
-
Low
Consump DC
-
-
-
-
-
-
-
-
-
-
208
-
-
-
-
Wide Range
DC
40-400
L7
-
-
-
50/60
DC
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
60
72
DC
Low
Consump DC
-
-
-
-
-
-
-
-
-
-
Wide Range
DC
200
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ F-Line Contactors and Starters
F-line Voltage Code Table
F-line Voltage Code
F-line Voltage Code
F-line (see notes at end of table)
LC1F115 LC1F265 LC1F500
F-line (see notes at end of table)
LC1F115 LC1F265 LC1F500
LC1F780 LC1F800
Note F1, Note F1,
LC1F780 LC1F800
Note F1, Note F1,
Voltage Frequency
Voltage Frequency
- F225
Note F1, Note F1, Note F1,
F2 F2 F2
- F400
- F630
- F225
Note F1, Note F1, Note F1,
F2 F2 F2
- F400
- F630
F2
F2, F3
F2
F2, F3
50/60
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
50/60
50
-
-
-
-
-
-
-
-
-
-
-
-
400
400/415
415
50
40-400
50/60
50/60
50
V5
-
-
-
M5
M6
M7
-
V7
V7
V7
V7
60
-
-
-
-
-
-
-
40-400
M7
MD
M7
MD
M7
MD
220
-
-
-
-
DC
N5
-
-
-
Low
Consump DC
-
-
-
-
-
-
-
-
-
-
40-400
50
N7
N7
N7
N7
Wide Range
DC
-
-
-
-
415-440
440
40-400
50/60
50
-
-
-
-
50/60
50
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
220/230
220/240
60
40-400
DC
-
-
-
-
60
R6
-
-
-
-
-
-
-
-
40-400
DC
R7
R7
R7
R7
MD
-
-
-
-
-
-
RD
RD
RD
40-400
DC
-
-
-
P7
440/460
460/480
DC
RD
-
-
-
-
-
-
-
-
-
-
-
-
MW
60
Q5
-
50/60
50
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
50/60
50
-
-
-
P5
-
-
-
-
-
-
-
230
230/240
240
60
-
-
-
480
60
-
-
N7
40-400
DC
P7
-
P7
P7
P7
40-400
50/60
50
-
-
S7, Note F4
-
-
-
-
-
-
-
-
-
50/60
50/60
50
-
-
-
-
-
-
-
500
575
600
660
S5
S7
-
-
-
-
40-400
50/60
60
S7
-
S7
-
S7
-
U5
U6
U7
-
-
-
-
60
-
-
-
-
-
-
-
40-400
DC
U7
-
U7
-
U7
-
50/60
60
-
-
-
-
-
-
-
-
DC
UD
UD
UD
UD
250
256
40-400
50
-
-
X7
-
-
Low
Consump DC
-
-
-
-
-
-
-
-
50/60
50
-
-
-
-
-
60
Y6
-
-
-
-
-
-
-
-
-
660/690
50/60
-
-
-
50/60
50
-
-
-
-
-
F-line Notes:
F1 For operating ranges refer to technical data section of the F-line contactors. Ranges vary
as a function of the supply (AC/DC).
F2 For non-stock voltage codes, order contactor and coil separately. See page 234 for coils.
F3 Built in surge suppressor included on LC1F800 coils.
F4 For use with LC1F265 and LC1F330 only.
F5 For LC1F400 contactor with 120 Vac coil, use F7 code.
277
380
W5
-
-
-
-
40-400
50/60
50
-
W7
W7
W7
-
-
-
-
-
-
Q5
-
-
-
-
60
Q6
-
-
-
-
40-400
50/60
50
Q7
Q7
Q7
Q7
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
380/400
380/440
60
-
40-400
DC
-
QW
V7
40-400
201
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ F-Line Contactors and Starters
Selection - Coils
Selection - Coils
Contactors Type LC1F
Coils for LC1F115 to F225, AC supply 50 to 60 Hz
Maximum ambient air temperature: 55 °C (131 °F); above this, use an LX9F coil, see page 208 to 209.
Operating cycles/hour (θ ≤ 55 °C [131 °F]): ≤ 2400.
Control Circuit Voltage
Average
resistance
at 20 °C (68 °F)
± 10%
Inductance
of Closed Circuit
Vc
50 Hz
Vc
60 Hz
Voltage Code
Catalog Number
Weight lb (kg)
V
V
Ω
H
For Contactors LC1F115 and LC1F150
24
–
0.27
0.94
0.78
1.17
4.55
4.77
6.38
9.14
14.5
18.4
18.9
28.1
31.1
57.2
67.9
72.6
86.9
95.1
141
0.04
0.13
0.11
0.16
0.59
0.64
0.86
1.15
1.87
2.38
2.5
B5
–
LX1FF024
LX1FF042
LX1FF040
LX1FF048
LX1FF092
LX1FF095
LX1FF110
LX1FF127
LX1FF162
LX1FF184
LX1FF187
LX1FF220
LX1FF240
LX1FF316
LX1FF340
LX1FF360
LX1FF380
LX1FF415
LX1FF500
LX1FF550
LX1FF660
LX1FF850
LX1FF1000
0.95 (0.430)
0.95 (0.430)
0.95 (0.430)
0.95 (0.430)
0.95 (0.430)
0.95 (0.430)
0.95 (0.430)
0.95 (0.430)
0.95 (0.430)
0.95 (0.430)
0.95 (0.430)
0.95 (0.430)
0.95 (0.430)
0.95 (0.430)
0.95 (0.430)
0.95 (0.430)
0.95 (0.430)
0.95 (0.430)
0.95 (0.430)
0.95 (0.430)
0.95 (0.430)
0.95 (0.430)
0.95 (0.430)
42
–
–
48
E6
E5
F6
G6
F5
G5
L6
M6
U6
M5
U5
Q6
N6
R6
Q5
N5
S5
Y6
Y5
–
48
–
–
110
–
115/120
110/115
–
LX1FF•••
127
–
–
200/208
220
–
–
230/240
265/277
–
220/230
3.44
4.1
240
–
380
7.05
8.21
9.21
10.3
12
–
415
–
440
380/400
460/480
–
415/440
500
–
17
–
660
172
20.3
28.9
48.9
68.5
660
–
254
–
1000
–
414
1000
610
–
Specifications
Average consumption at 20 °C (68 °F):
- inrush 50 Hz: 550 VA; 60 Hz: 660 VA.
- sealed 50 Hz: 45 VA; 60 Hz: 55 VA, cos ϕ = 0.32.
Heat dissipation: 12 to 16 W
Operating time at Vc: closing = 23 to 35 ms; Opening = 5 to 15 ms
For Contactors LC1F185 and LC1F225
24
–
0.18
0.57
0.47
0.71
2.74
2.87
4.18
5.35
8.8
0.03
0.09
0.08
0.12
0.44
0.49
0.65
0.86
1.41
1.8
B5
–
LX1FG024
LX1FG042
LX1FG040
LX1FG048
LX1FG092
LX1FG095
LX1FG110
LX1FG127
LX1FG162
LX1FG184
LX1FG187
LX1FG220
LX1FG240
LX1FG316
LX1FG340
LX1FG360
LX1FG380
LX1FG415
LX1FG500
LX1FG550
LX1FG660
LX1FG850
LX1FG1000
1.21 (0.550)
1.21 (0.550)
1.21 (0.550)
1.21 (0.550)
1.21 (0.550)
1.21 (0.550)
1.21 (0.550)
1.21 (0.550)
1.21 (0.550)
1.21 (0.550)
1.21 (0.550)
1.21 (0.550)
1.21 (0.550)
1.21 (0.550)
1.21 (0.550)
1.21 (0.550)
1.21 (0.550)
1.21 (0.550)
1.21 (0.550)
1.21 (0.550)
1.21 (0.550)
1.21 (0.550)
1.21 (0.550)
42
–
–
48
E6
E5
F6
G6
F5
G5
L6
M6
U6
M5
U5
Q6
N6
R6
Q5
N5
S5
Y6
Y5
–
48
–
–
110
–
115/120
110/115
–
127
–
LX1FG•••
–
200/208
220
–
11.1
11.4
16.5
20.1
34
–
230/240
265/277
–
1.87
2.59
3.09
5.32
6.2
220/230
240
–
380
–
415
40.8
43.5
51.3
62.3
82.7
103
154
249
370
–
440
6.94
7.75
9.06
12.8
15.3
21.8
36.6
51.6
380/400
460/480
–
415/440
500
–
–
660
660
–
–
1000
–
1000
–
Specifications
Average consumption at 20 °C (68 °F):
- inrush 50 Hz: 805 VA; 60 Hz: 970 VA.
- sealed 50 Hz: 55 VA; 60 Hz: 66 VA, cos ϕ = 0.34.
Heat dissipation: 18 to 24 W
Operating time at Vc: closing = 20 to 35 ms; Opening = 7 to 15 ms
202
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ F-Line Contactors and Starters
Selection - Coils
Contactors Type LC1F
Coils for LC1F265 to F500, AC supply 40 to 400 Hz
Low sealed consumption.
Operate on networks with harmonic numbers ≤ 7
Operating cycles/hour (θ ≤ 55 °C [131 °F]) ≤ 2400.
Average resistance
at 20 °C (68 °F) ±10%
Control circuit
voltage
Vc
Inductance
of Closed Circuit
Voltage Code
Catalog Number
Weight lb (kg)
Inrush
Sealed
V
Ω
Ω
H
For Contactors LC1F265 and LC1F330
24
0.8
20
c
c
c
c
c
c
c
c
c
c
c
c
B7
E7
F7
G7
L7
M7
U7
W7
Q7
S7
X7
–
LX1FH0242
LX1FH0482
LX1FH1102
LX1FH1272
LX1FH2002
LX1FH2202
LX1FH2402
LX1FH2772
LX1FH3802
LX1FH5002
LX1FH6002
LX1FH10002
1.65 (0.750)
1.65 (0.750)
1.65 (0.750)
1.65 (0.750)
1.65 (0.750)
1.65 (0.750)
1.65 (0.750)
1.65 (0.750)
1.65 (0.750)
1.65 (0.750)
1.65 (0.750)
1.65 (0.750)
48
2.96
18.7
22.9
57.8
71.6
71.6
114.3
222
72
110/115
120/127
200/208
220/230
240
415
536
1285
1621
1621
2425
5075
7990
11 988
30 124
277
380/415
480/500
600/660
1000
345
LX1FH•••2
521
1218
Specifications
Average consumption at 20 °C (68 °F) for 50 or 60 Hz and cos ϕ = 0.9:
- inrush: 600 to 700 VA.
- sealed: 8 to 10 VA.
Heat dissipation: 8 W
Operating time at Vc: closing = 40 to 65 ms; Opening = 100 to 170 ms
For Contactor LC1F400
48
1.6
29.5
230
0.18
1.35
1.75
4.1
E7
F7
G7
L7
M7
U7
W7
Q7
N7
S7
X7
–
LX1FJ048
LX1FJ110
LX1FJ127
LX1FJ200
LX1FJ220
LX1FJ240
LX1FJ280
LX1FJ380
LX1FJ415
LX1FJ500
LX1FJ600
LX1FJ1000
2.20 (1.000)
2.20 (1.000)
2.20 (1.000)
2.20 (1.000)
2.20 (1.000)
2.20 (1.000)
2.20 (1.000)
2.20 (1.000)
2.20 (1.000)
2.20 (1.000)
2.20 (1.000)
2.20 (1.000)
110/120
127
9.8
12.8
30
280
200/208
220/230
230/240
265/277
380/400
415/480
500
815
37
1030
1320
1700
3310
4070
4980
6310
19 420
5.1
47.5
61
6.4
8.1
LX1FJ•••
120
145
190
243
720
15.8
19.4
25.5
27.4
84.6
550/600
1000
Specifications
Average consumption at 20 °C (68 °F) for 50 or 60 Hz and cos ϕ = 0.9:
- inrush: 1000 to 1150 VA.
- sealed: 12 to 18 VA.
Heat dissipation: 14 W
Operating time at Vc: closing = 40 to 75 ms; Opening = 100 to 170 ms
For Contactor LC1F500
48
1.9
33.5
260
0.19
1.25
1.5
E7
F7
G7
L7
M7
U7
W7
Q7
N7
S7
X7
–
LX1FK048
LX1FK110
LX1FK127
LX1FK200
LX1FK220
LX1FK240
LX1FK280
LX1FK380
LX1FK415
LX1FK500
LX1FK600
LX1FK1000
2.53 (1.150)
2.53 (1.150)
2.53 (1.150)
2.53 (1.150)
2.53 (1.150)
2.53 (1.150)
2.53 (1.150)
2.53 (1.150)
2.53 (1.150)
2.53 (1.150)
2.53 (1.150)
2.53 (1.150)
110/120
127
9.55
11.5
29
315
200/208
220/230
230/240
265/277
380/400
415/480
500
735
3.75
4.55
5.75
7.3
35.5
44.5
56.5
112
143
172
232
679
915
1160
1490
2980
3730
4590
5660
16 960
LX1FK•••
14.7
18.4
22.8
23.9
72
550/600
1000
Specifications
Average consumption at 20 °C (68 °F) for 50 or 60 Hz, cos ϕ = 0.9:
- inrush: 1050 to 1150 VA.
- sealed: 16 to 20 VA.
Heat dissipation: 18 W
Operating time at Vc: closing = 40 to 75 ms; Opening = 100 to 170 ms
c
Please consult your Local Square D Field Sales Office.
203
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ F-Line Contactors and Starters
Selection - Coils
Contactors Type LC1F
Coils for LC1F630 to F800, AC supply 40 to 400 Hz
Low sealed consumption.
Operate on networks with harmonic numbers ≤ 7.
Average resistance
at 20 °C (68 °F) ±10%
Control circuit
voltage
Vc
Inductance
of Closed Circuit
Voltage Code
Catalog Number
Weight lb (kg)
Inrush
Sealed
V
Ω
Ω
H
For Contactor LC1F630
48
1.1
17.1
165
0.09
1.85
1.05
2.65
3.35
4.1
E7
F7
G7
L7
M7
W7
Q7
N7
S7
X7
–
LX1FL048
LX1FL110
LX1FL127
LX1FL200
LX1FL220
LX1FL260
LX1FL380
LX1FL415
LX1FL500
LX1FL600
LX1FL1000
3.30 (1.500)
3.30 (1.500)
3.30 (1.500)
3.30 (1.500)
3.30 (1.500)
3.30 (1.500)
3.30 (1.500)
3.30 (1.500)
3.30 (1.500)
3.30 (1.500)
3.30 (1.500)
110/120
127
6.45
8.1
205
200/208
220/240
265/277
380/400
415/480
500
20.5
25.5
31
605
730
900
78
2360
2960
3660
4560
12 880
10.5
13
96
LX1FL•••
120
155
474
16.5
19.5
56.2
550/600
1000
Specifications
Average consumption at 20 °C (68 °F) for 50 or 60 Hz, cos ϕ = 0.9:
- inrush: 1500 to 1730 VA.
- sealed: 20 to 25 VA.
Operating cycles/hour (θ ≤ 55 °C [131 °F]): 1200.
Heat dissipation: 20 W
Operating time at Vc: closing = 40 to 80 ms; Opening = 100 to 200 ms
For Contactor LC1F780
Replacement rectifier for use with LX1FXkkk coils: DR5TX5S.
110/120
127
4.95 q
6.1 q
230 q
0.21
0.26
0.66
0.82
1.25
2.3
F7
LX1FX110 c
LX1FX127 c
LX1FX200 c
LX1FX220 c
LX1FX280 c
LX1FX380 c
LX1FX415 c
LX1FX500 c
6.61 (3.000)
6.61 (3.000)
6.61 (3.000)
6.61 (3.000)
6.61 (3.000)
6.61 (3.000)
6.61 (3.000)
6.61 (3.000)
280 q
G7
L7
200/208
220/240
265/277
380
15.5 q
19.5 q
29.8 q
60.9 q
74.3 q
92 q
750 q
920 q
M7
W7
Q7
N7
S7
1330 q
2780 q
3340 q
4180 q
415/480
500
2.8
3.5
Specifications
Average consumption at 20 °C (68 °F) for 50 or 60 Hz, cos ϕ = 0.9:
- inrush: 1900 to 2300 VA.
- sealed: 44 to 55 VA.
Operating cycles/hour (θ ≤ 55 °C [131 °F]): 600.
Heat dissipation: 2 x 22 W
Operating time at Vc: closing = 40 to 80 ms; Opening = 130 to 230 ms
For Contactor LC1F800
110/127
–
–
–
–
–
–
–
–
–
FW
MW
QW
LX4F8FW t
LX4F8MW t
LX4F8QW t
3.64 (1.650)
3.64 (1.650)
3.64 (1.650)
220/240
380/440
Specifications
Operating cycles/hour (θ ≤ 55 °C [131 °F]): 600.
Heat dissipation: 25 W
Operating time at Vc: closing = 40 to 80 ms; Opening = 20 to 40 ms
c
q
t
Catalog number includes a set of 2 identical coils, to be connected in series.
Value for the 2 coils in series.
Coil circuit requires a separately mounted rectifier catalog number DR5 TE4U.
204
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ F-Line Contactors and Starters
Selection - Coils
Contactors Type LC1F
Coils for LC1F115 to F400, DC supply
Low sealed consumption.
Operate on networks with harmonic numbers ≤ 7.
Operating cycles/hour (θ ≤ 55 °C [131 °F]) ≤ 2400.
Average resistance
at 20 °C (68 °F) ±10%
Control circuit
voltage
Vc
Inductance
of Closed Circuit
Voltage Code
Catalog Number
Weight lb (kg)
Inrush
Sealed
V
Ω
Ω
H
For Contactors LC1F115 and LC1F150
24
1.12
4.52
21.7
26.8
84
177
11
BD
ED
FD
GD
MD
UD
RD
LX4FF024
LX4FF048
LX4FF110
LX4FF125
LX4FF220
LX4FF250
LX4FF440
0.95 (0.430)
0.95 (0.430)
0.95 (0.430)
0.95 (0.430)
0.95 (0.430)
0.95 (0.430)
0.95 (0.430)
48
715
42.7
179
223
704
868
4000
110
2940
3560
11 100
13 000
48 200
125
220/230
250
105
301
440/460
Specifications
Average consumption:
- inrush: 543 to 665 W.
- sealed: 3.94 to 4.83 W.
LX4FF•••
Operating time at Vc: closing = 30 to 40 ms; Opening = 30 to 50 ms
For Contactors LC1F185 and LC1F225
24
0.79
169
14.9
55.3
241
BD
ED
FD
GD
MD
UD
RD
LX4FG024
LX4FG048
LX4FG110
LX4FG125
LX4FG220
LX4FG250
LX4FG440
1.21 (0.550)
1.21 (0.550)
1.21 (0.550)
1.21 (0.550)
1.21 (0.550)
1.21 (0.550)
1.21 (0.550)
48
3.2
662
110
14.9
19.
2810
3320
10 200
12 400
39 700
125
289
220/230
250
57.7
76.
890
1140
4210
440/460
Specifications
223
Average consumption:
- inrush: 737 to 902 W.
- sealed: 4.13 to 5.07 W.
Operating time at Vc: closing = 30 to 40 ms; Opening = 30 to 50 ms
For Contactors LC1F265 and LC1F330
24
0.9
192
26.3
92.9
424
BD
ED
FD
GD
MD
UD
RD
LX4FH024
LX4FH048
LX4FH110
LX4FH125
LX4FH220
LX4FH250
LX4FH440
1.63 (0.740)
1.63 (0.740)
1.63 (0.740)
1.63 (0.740)
1.63 (0.740)
1.63 (0.740)
1.63 (0.740)
48
3.49
16.8
20.8
65.7
84
707
110
3180
3840
11 500
13 900
44 000
125
530
220/230
250
1590
1910
7570
440/460
Specifications
255
Average consumption:
- inrush: 655 to 803 W.
- sealed: 3.68 to 4.53 W.
LX4FH•••
Operating time at Vc: closing = 40 to 50 ms; Opening = 40 to 65 ms
For Contactor LC1F400
48
2.5
558
56
ED
FD
GD
MD
UD
RD
LX4FJ048
LX4FJ110
LX4FJ125
LX4FJ220
LX4FJ250
LX4FJ440
2.14 (0.970)
2.14 (0.970)
2.14 (0.970)
2.14 (0.970)
2.14 (0.970)
2.14 (0.970)
110
12.7
15.8
47
2660
3130
8820
10 500
33 750
270
330
910
1200
4435
125
220
250
61
440
236
Specifications
Average consumption:
- inrush: 920 to 1140 W.
- sealed: 4 to 7.5 W.
Operating time at Vc: closing = 50 to 60 ms; Opening = 45 to 60 ms
205
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ F-Line Contactors and Starters
Selection - Coils
Contactors Type LC1F
Coils for LC1F500 to F800, DC Supply
Low sealed consumption.
Average resistance
at 20 °C (68 °F) ±10%
Control
circuit voltage
Vc
Inductance
of Closed Circuit
Voltage Code
Catalog Number
Weight lb (kg)
Inrush
Sealed
V
Ω
Ω
H
For Contactor LC1F500
48
2.35
11.5
15
515
67
ED
FD
GD
MD
UD
RD
LX4FK048
LX4FK110
LX4FK125
LX4FK220
LX4FK250
LX4FK440
2.40 (1.080)
2.40 (1.080)
2.40 (1.080)
2.40 (1.080)
2.40 (1.080)
2.40 (1.080)
110
2450
2930
8150
9650
31 300
280
125
400
220
44
1080
1350
5270
250
56
440
225
Specifications
Average consumption:
- inrush: 990 to 1220 W.
- sealed: 4.5 to 8 W.
LX4FK•••
Operating cycles/hour (θ ≤ 55 °C [131 °F]): 2400
Operating time at Vc: closing = 50 to 60 ms; Opening = 45 to 60 ms
For Contactor LC1F630
48
1.7
8.1
10
353
40.5
180
230
650
815
2910
ED
FD
GD
MD
UD
RD
LX4FL048
LX4FL110
LX4FL125
LX4FL220
LX4FL250
LX4FL440
3.21 (1.450)
3.21 (1.450)
3.21 (1.450)
3.21 (1.450)
3.21 (1.450)
3.21 (1.450)
110
1680
2110
5160
6080
23 120
125
220
31
250
38
440
152
Specifications
Average consumption:
- inrush: 1420 to 1920 W.
- sealed: 6.5 to 72.5 W.
Operating cycles/hour (θ ≤ 55 °C [131 °F]): 1200
Operating time at Vc: closing = 60 to 70 ms; Opening = 40 to 50 ms
For contactor LC1F780
110
6.1 q
7.7 q
24.6 q
29.8 q
92 q
280 q
0.26
0.33
1
FD
GD
MD
UD
RD
LX4FX110 c
LX4FX125 c
LX4FX220 c
LX4FX250 c
LX4FX440 c
6.61 (3.000)
6.61 (3.000)
6.61 (3.000)
6.61 (3.000)
6.61 (3.000)
125
410 q
220
1100 q
1330 q
4180 q
250
1.25
3.5
440
Specifications
Average consumption:
- inrush: 1960 to 2420 W.
- sealed: 42 to 52 W.
Operating cycles/hour (θ ≤ 55 °C [131 °F]): 600
Operating time at Vc: closing = 70 to 80 ms; Opening = 100 to 130 ms
For Contactor LC1F800
110/127
–
–
–
–
–
–
–
–
–
FW
MW
QW
LX4F8FW t
LX4F8MW t
LX4F8QW t
3.64 (1.650)
3.64 (1.650)
3.64 (1.650)
220/240
380/440
Specifications
Operating cycles/hour (θ ≤ 55 °C [131 °F]): 600
Heat dissipation: 25 W
Operating time at Vc: closing = 40 to 80 ms; Opening = 20 to 40 ms
c
q
t
Catalog number includes a set of 2 identical coils, to be connected in series.
Value of the 2 coils in series.
Coil circuit requires a separately mounted rectifier catalog number DR5 TE4U.
206
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ F-Line Contactors and Starters
Selection - Coils
Contactors Type LC1F
Coils for LC1F115 to F330 (specific applications c)
AC Supply, 40 to 400 Hz
Low sealed consumption.
High tolerance to inrush voltage drops.
Immune to micro-breaks (mains supply or contact chain).
Operate on networks with harmonic numbers ≤ 7.
Average resistance
at 20 °C (68 °F) ±10%
Control
circuit voltage
Vc
Inductance
of Closed Circuit
Voltage Code
Catalog Number
Weight lb (kg)
Inrush
Sealed
V
Ω
Ω
H
For Contactors LC1F115 and LC1F150
48
3.03
14.8
19
80.2
0.3
2.08
2.65
7.7
9.68
23
E7
F7
G7
M7
U7
Q7
N7
S7
LX9FF048
LX9FF110
LX9FF127
LX9FF220
LX9FF240
LX9FF380
LX9FF415
LX9FF500
0.95 (0.430)
0.95 (0.430)
0.95 (0.430)
0.95 (0.430)
0.95 (0.430)
0.95 (0.430)
0.95 (0.430)
0.95 (0.430)
110/115
127
579
746
220/230
240
59.4
73.5
173
218
262
2190
2750
6540
8460
10 300
380/400
415/440
500
30
36
LX9FF•••
Specifications
Average consumption at 20 °C (68 °F):
- inrush: 690 to 855 VA.
- sealed: 6.6 to 8.1 VA.
Heat dissipation: 5.9 to 7.2 W.
Operating time at Vc: Closing = 35 ms; Opening = 130 ms.
Operating cycles/hour (θ ≤ 55 °C [131 °F]): < 2400.
For Contactors LC1F185 and LC1F225
48
2.2
60
0.23
1.46
1.85
5.84
7.22
16.4
20.6
26.3
E7
F7
G7
M7
U7
Q7
N7
S7
LX9FG048
LX9FG110
LX9FG127
LX9FG220
LX9FG240
LX9FG380
LX9FG415
LX9FG500
1.21 (0.550)
1.21 (0.550)
1.21 (0.550)
1.21 (0.550)
1.21 (0.550)
1.21 (0.550)
1.21 (0.550)
1.21 (0.550)
110/115
127
10.4
13
411
520
220/230
240
42.1
50.6
128
157
194
1680
2060
4730
5930
7550
380/400
415/440
500
Specifications
LX9FG•••
Average consumption at 20 °C (68 °F):
- inrush: 950 to 1180 VA.
- sealed: 8.9 to 10.9 VA.
Heat dissipation: 8 to 9.8 W.
Operating time at Vc: Closing = 35 ms; Opening = 130 ms.
Operating cycles/hour (θ ≤ 55 °C [131 °F]): < 2400.
For Contactors LC1F265 and LC1F330
48
2.96
18.7
22.9
71.6
222
72
q
q
q
q
q
q
–
–
–
–
–
–
LX9FH0482
LX9FH1102
LX9FH1272
LX9FH2202
LX9FH3802
LX9FH5002
1.65 (0.750)
1.65 (0.750)
1.65 (0.750)
1.65 (0.750)
1.65 (0.750)
1.65 (0.750)
110/115
120/127
220/230
380/415
500
415
156
1621
5075
7990
345
Specifications
Average consumption at 20 °C (68 °F):
- inrush: 560 to 660 VA.
- sealed: 8 to 10 VA.
Heat dissipation: 8.4 to 10.4 W.
Operating time at Vc: Closing = 45 ms; Opening = 25 ms.
Operating cycles/hour (θ ≤ 55 °C [131 °F]): < 3600.
c
Application examples:
•
•
Hoisting (inching, high operating rate).
Normal Standby (distributed power supplies).
These coils are specifically designed for use at high ambient temperature (mounting in MCCs, non ventilated enclosures, etc.).
q
Please consult your Local Square D Field Sales Office.
207
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ F-Line Contactors and Starters
Selection - Coils
Contactors Type LC1F
Coils for LC1F400 to F630 (specific applications)
AC Supply, 40 to 400 Hz
Coils with short operating times (at Vc):
Closing:
60 ms
Opening:
50 ms (c side); 20 ms (a side)
Coils for high operating rates
(θ ≤ 70 °C [158 °F]):
3600 operating cycles/hour
1800 for LC1F630
Coils with low inrush consumption
Average resistance
at 20 °C (68 °F) ±10%
Control circuit
voltage
Vc
Rectifier
Coil
Inductance of
closed circuit
Inrush
Sealed
Catalog Number c Catalog Number
Weight lb (kg)
V
Ω
Ω
H
For Contactor LC1F400
48
4.03
25.7
32.3
99.5
311
386
478
43
0.22
1.3
1.7
5
DR5TF4V
DR5TE4U
DR5TE4U
DR5TE4U
DR5TE4S
DR5TE4S
DR5TE4S
LX9FJ917
LX9FJ925
LX9FJ926
LX9FJ931
LX9FJ936
LX9FJ937
LX9FJ938
2.14 (0.970)
2.14 (0.970)
2.14 (0.970)
2.14 (0.970)
2.14 (0.970)
2.14 (0.970)
2.14 (0.970)
110
246
302
919
3011
3690
4380
127
220/230
380/415
440
15
19
500
23
Specifications
LX9FJ•••
Average consumption:
- inrush: 500 VA.
- sealed: 23 VA.
Heat dissipation: 11.4 to 13.9 W.
For Contactor LC1F500
48
3.73
30.7
204
0.18
1.1
1.4
4
DR5TF4V
DR5TE4U
DR5TE4U
DR5TE4U
DR5TE4S
DR5TE4S
DR5TE4S
LX9FK917
LX9FK925
LX9FK926
LX9FK931
LX9FK936
LX9FK937
LX9FK938
2.38 (1.080)
2.38 (1.080)
2.38 (1.080)
2.38 (1.080)
2.38 (1.080)
2.38 (1.080)
2.38 (1.080)
110
24
127
29.8
89.9
274
361
448
250
220/230
380/415
440
770
2075
3060
3750
12
16
500
19
Specifications
LX9FK•••
Average consumption:
- inrush: 550 VA.
- sealed: 31 VA.
Heat dissipation: 15 to 18.3 W.
For Contactor LC1F630
48
2.81
13.5
20.8
52
20.8
114
0.17
0.77
1.2
2.9
3.6
8.8
11
DR5TF4V
DR5TE4U
DR5TE4U
DR5TE4U
DR5TE4U
DR5TE4S
DR5TE4S
DR5TE4S
LX9FL917
LX9FL924
LX9FL926
LX9FL930
LX9FL931
LX9FL935
LX9FL936
LX9FL938
3.20 (1.450)
3.20 (1.450)
3.20 (1.450)
3.20 (1.450)
3.20 (1.450)
3.20 (1.450)
3.20 (1.450)
3.20 (1.450)
110
127
167
220
425
220/240
380/400
415/440
500
64.5
163
204
312
518
1360
1670
2510
17
LX9FL•••
Specifications
Average consumption:
- inrush: 830 VA.
- sealed: 47 VA.
Heat dissipation: 22.8 to 27.8 W.
c
Rectifier to be ordered separately; weight of rectifier: 0.100 kg (0.22 lbs).
208
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ F-Line Contactors and Starters
Selection - Coils
Contactors Type LC1F
Coils for LC1F400 to F630 (specific applications)
DC Supply
Coils with short operating times (at Vc):
Closing:
Opening:
60 ms
20 ms
Coils with high operating rates
(θ ≤ 70 °C [158 °F]):
3600 operating cycles/hour
1800 for LC1F630
Coils with low inrush consumption
Average resistance
at 20 °C (68 °F) ±10%
Resistor
Coil
Control circuit
voltage
Vc
Inductance of
closed circuit
Quantity and
Catalog Number c
Inrush
Sealed
Catalog Number
Weight lb (kg)
V
Ω
Ω
H
For Contactor LC1F400
48
5.11
32.3
39.4
123
99
0.27
1.7
2
1 x DR2SC0047
1 x DR2SC0330
1 x DR2SC0390
1 x DR2SC1200
1 x DR2SC4700
LX9FJ918
LX9FJ926
LX9FJ927
LX9FJ932
LX9FJ938
2.14 (0.970)
2.14 (0.970)
2.14 (0.970)
2.14 (0.970)
2.14 (0.970)
110
632
760
2320
9080
125
220
6.1
23
440/460
478
Specifications
Average consumption:
- inrush: 430 W.
- sealed: 22 W.
LX9FJ•••
For Contactor LC1F500
48
4.67
29.8
37.4
115
76.7
470
0.22
1.4
1.7
5.1
19
1 x DR2SC0039
1 x DR2SC0220
1 x DR2SC0330
1 x DR2SC1000
1 x DR2SC3300
LX9FK918
LX9FK926
LX9FK927
LX9FK932
LX9FK938
2.38 (1.080)
2.38 (1.080)
2.38 (1.080)
2.38 (1.080)
2.38 (1.080)
110
125
637
220
1935
7050
440/460
448
Specifications
Average consumption:
- inrush: 470 W.
- sealed: 29 W.
LX9FK•••
For Contactor LC1F630
48
3.43
17.2
20.8
64.5
260
52.9
272
0.20
0.98
1.2
2 x DR2SC0047
2 x DR2SC0270
2 x DR2SC0330
2 x DR2SC1000
2 x DR2SC3900
LX9FL918
LX9FL925
LX9FL926
LX9FL931
LX9FL937
3.20 (1.450)
3.20 (1.450)
3.20 (1.450)
3.20 (1.450)
3.20 (1.450)
110
125
333
220
1018
4010
3.6
440/460
14
Specifications
Average consumption:
- inrush: 733 W.
- sealed: 48 W.
LX9FL•••
c
Resistors to be ordered separately, weight of resistor: 0.030 kg (0.06 lbs).
209
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ F-Line Contactors and Starters
Dimensions and Mounting
Dimensions and Mounting
Contactors Type LC1F
Dimensions
Dimensions shown in mm (mm x 0.0394 = inches)
LC1F115 to F330
F115 M6x25
S
S1
F150 M8x25
F185 M8x25
F225 M10x35
F265 M10x35
F330 M10x35
■
4xØ 6.5
(1/4 inch
mounting
screws)
X1 (mm) = Minimum electrical clearance according to operating voltage
and breaking capacity
200 to 500 V
600 to 1000 V
LC1F115, LC1F150
LC1F185
10
10
10
10
15
15
15
15
LC1F225, LC1F265
LC1F330
=
G1
G
=
q
f
Power terminal protection shroud (see page 198).
Minimum distance required for coil removal.
Z
Y
L
Q
P
P
Q1
c
a
f
LC1-
F115
a
b
b1
b2
c
f
G
G1
80
80
80
80
80
80
80
80
96
96
96
96
J
J1
L
M
P
Q
Q1
S
S1
Y
Z
3P
4P
3P
4P
3P
4P
3P
4P
3P
4P
3P
4P
163.5
200.5
163.5
200.5
168.5
208.5
168.5
208.5
201.5
244.5
213
162
162
170
170
174
174
197
197
203
203
206
206
137
137
137
137
137
137
137
137
145
145
145
145
265
265
301
301
305
305
364
364
375
375
375
375
171
171
171
171
181
181
181
181
213
213
219
219
131
106
143
106
143
111
151
111
151
142
190
154.5
202.5
106
106
106
106
106
106
106
106
106
106
106
106
120
120
120
120
120
120
120
120
120
120
120
120
107
147
147
150
150
154
154
172
172
178
178
181
181
37
37
40
40
40
40
48
48
48
48
48
48
29.5
29.5
26
26
29
29
21
17
39
34
43
43
60
20
20
20
20
20
20
25
25
25
25
25
25
26
44
44
44
44
44
44
44
44
38
38
38
38
13.5
13.5
13.5
13.5
13.5
13.5
13.5
13.5
21.5
21.5
20.5
20.5
131
131
131
130
130
130
130
147
147
147
147
107
60
26
107
57.5
55.5
59.5
59.5
51.5
47.5
66.5
66.5
74
34
F150
F185
F225
F265
F330
107
34
113.5
113.5
113.5
113.5
141
34
34
44.5
44.5
44.5
44.5
44.5
44.5
141
145
261
145
74
f = minimum distance required for coil removal
LC1F400 and F500
Dimensions shown in mm
mm x 0.0394 = inches
56
S
44.5
8xØ8.5
■
6xM10x35
(5/16 inch
mounting
screws)
X1 (mm) = Minimum electrical clearance according to operating
voltage and breaking capacity
200 to 500 V
600 to 1000 V
LC1F400
LC1F500
15
15
20
20
G
23.5
G1
J
q
f
Power terminal protection shroud (see page 198).
Minimum distance required for coil removal.
L
Q
P
P
Q1
c
a
f
LC1-
a
b
b2
c
f
G*
80
80
80
80
80
140
G min G max G1 c
G1 min G1 max
J
L
M
P
Q
Q1
96
S
2P
213
213
261
233
233
288
206
206
206
238
238
238
375
375
375
400
400
400
219
119
119
119
141
141
141
66
66
66
66
66
66
102
102
150
120
120
175
170
170
170
170
170
230
156
156
156
156
156
156
192
192
240
210
210
265
19.5
19.5
67.5
39.5
39.5
34.5
145
145
145
146
146
146
181
181
181
208
208
208
48
48
48
55
55
55
69
43
43
76
46
46
25
25
25
30
30
30
F400
3P
4P
2P
3P
4P
219
219
232
232
232
74
74
102
77
F500
77
c
Supplied.
210
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ F-Line Contactors and Starters
Dimensions and Mounting
Contactors Type LC1F
Dimensions
Dimensions shown in mm (mm x 0.0394 = inches)
LC1F630 and F800
72
40
64
■
6xM12x45
4xØ 10.5
60.5
G
J1
155
197
255
Q
80
80
Q1
181 ■
q
c
Power terminal protection shroud (see page 220).
Minimum distance required for coil removal.
a
G
X1 (mm) = Minimum electrical clearance according to operating voltage and
breaking capacity
a
G min
100
G max
195
J1
Q
Q1
127
89
supplied
LC1F630 2P
309
309
389
180
180
240
68.5
102
60
60
Voltage
200 to 500 V 690 to 1000 V 200 to 690 V 1000 V
LC1F630
3P
100
195
68.5
68.5
LC1F630
LC1F800
20
–
30
–
–
–
LC1F800
LC1F630 4P
150
275
89
10
20
LC1F780
60
=
26
=
12xM12x45
X1 (mm) = Min. electrical clearance according
to operating voltage and breaking capacity
Voltage
200 to 500 V 690 to 1000 V
X1 (mm)
30
35
c
Minimum distance required
for coil removal.
165
255
191
160
160
191
183 ■
3P=702, 4P=862
183 ■
Mounting holes of LC1F7804
Mounting holes of LC1F780
8x¯10.5
6x¯10.5
(3/8 inch
mounting
screws)
(3/8 inch
mounting
screws)
90
240
240
132
90
240
190
240
102
211
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ F-Line Contactors and Starters
Dimensions and Mounting
Reversing contactors and changeover contactor pairs LC2F
Horizontally mounted
Dimensions shown in mm (mm x 0.0394 = inches)
For customer assembly, see pages 190 to 193.
2 x LC1F115 to LC1F330
2 x LC1F400, F500, F630, F800
P1
3xØ6.5
3xØ6. 5
P1
8xØ8.5 ■
8xØ8.5 ■
J1
J3
G
J
J2
a
G
J1
J3
=
=
=
=
L
c
G1
G1
J1
G1
J
G1
J1
a
X1 (mm) = Minimum electrical clearance according to operational voltage and breaking capacity
200 to 500 V
660 to 1000 V
200 to 690 V
1000 V
LC1F115, LC1F150
LC1F185
10
10
10
10
15
15
20
–
15
15
15
15
20
20
30
–
–
–
–
–
LC1F225, LC1F265
LC1F330
–
–
–
–
LC1F400
–
–
LC1F500
–
–
LC1F630
–
–
LC1F800
10
20
2 x
a
b
b1
c
G
G1
80
80
80
80
80
80
80
80
96
96
96
96
170
170
170
230
–
J
J1
J2
–
J3
L
P1
77
77
71
71
3P
LC1F115
4P
345
419
345
422
357
437
357
437
425
521
447
543
446
542
485
595
636
796
636
162
162
170
170
174
174
197
197
203
203
206
206
206
206
238
238
304
304
304
137
137
137
137
137
137
137
137
145
145
145
145
209
209
209
209
280
280
280
171
171
171
171
181
181
181
181
213
213
219
219
219
219
232
232
255
255
255
–
71
57
–
107
107
107
107
–
108
71
75.5
57
–
–
3P
LC1F150
4P
–
–
–
–
111
78
75.5
59.5
79.5
59.5
79.5
61.5
85.5
65.5
89.5
64.5
–
–
3P
LC1F185
4P
–
–
–
113.5
113.5
113.5
113.5
141
78
–
118
78
–
–
78
3P
LC1F225
4P
–
–
–
62
–
118
109
157
124
172
157
157
156
156
139
139
139
–
–
54
3P
LC1F265
4P
–
–
–
100
100
107
107
107
107
112
112
137
137
137
–
–
–
141
3P
LC1F330
4P
–
–
–
145
–
–
–
145
3P
LC1F400
4P
80
80
80
140
180
240
180
67
67
66
66
–
19.5
67.5
39.5
34.5
–
145
112.5
84.5
79.5
68.5
88.5
68,5
145
3P
LC1F500
4P
146
146
3P
LC1F630
4P
155
–
–
–
155
LC1F800
3P
–
–
–
155
c
q
Except LC1F630 and LC1F800: 4 x Ø 10.5.
Except LC1F630.and LC1F800
212
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ F-Line Contactors and Starters
Dimensions and Mounting
Reversing contactors and changeover contactor pairs LC2F
Vertically mounted
Dimensions shown in mm (mm x 0.0394 = inches)
For customer assembly, with mechanical interlock (MI) LA9F•••.
2 x LC1 identical or different ratings (LC1F115 to LC1F630 and LC1F800). See pages 190 to 193.
Assembly A
Assembly B
Assembly C
J3
80
12. 5
■
G5
G1
12.5
■
G5
G1
■
■
■
c
q
f
Mechanical interlock shaft.
■
■
(q)
4 x Ø6.5 for LC1F115 to LC1F225
For assembly of contactors of
different ratings only.
=
=
= =
p
t
Mechanical interlock guide bracket.
4 x Ø8.5 for LC1F400, LC1F500 or
4 x Ø10.5 for LC1F630, LC1F800.
4 x Ø6.5 for LC1F265.
■
9
J1
G3■
G3
J1
k
G3■
J1
■
■
■
■
■
■
■
■
= =
=
=
=
=
■
9
12,5
G4 G2
J4
80
J4
80
J2
J2
J2
Assembly A (F800 in 3-pole only)
Assembly B (F800 in 3-pole only)
MI
G3
3P
0
3
0
H
H1
min
80
90
100
J1
3P
137
139.5 159.5
139.5 159.5
MI
G1
3P
96
80
80
G3
3P
21
45
45
G5
3P
60
83
83
H
min
240
250
270
Catalog #
LA9FF4F
LA9FG4F
LA9FG4G
4P
0
4
min
200
210
220
max
310
300
310
max
190
180
190
4P
155.5
Catalog #
LA9FH4F
LA9FJ4F
LA9FK4F
4P
96
80
4P
27
26
26
4P
max
380
380
380
83
83
83
0
140
LA9FL4F
180
240
35
17
74
74
310
380
J2
3P
137
137
J3
3P
J4
4P
4P
67
73
73
3P
48.5
54
4P
67
69
73
LA9FH4G
LA9FJ4G
LA9FK4G
LA9FL4G
96
80
80
180
96
80
140
240
19
42
42
33
23
22
22
13
60
83
83
74
83
83
83
74
250
250
270
310
380
380
380
380
LA9FF4F
LA9FG4F
LA9FG4G
155.5 48.5
155.5 53
139.5 159.5 53
53
For customer assembly, mounting recommended on AM1EC••• uprights,
2 x LC1F780
H1
J1
3P
J2
3P
J4
3P
min
110
80
100
140
120
90
max
250
210
210
210
250
220
220
220
4P
4P
4P
67
67
67
67
73
73
73
73
LA9FH4F
LA9FJ4F
LA9FK4F
LA9FL4F
LA9FH4G
LA9FJ4G
LA9FK4G
LA9FL4G
157.5 181.5 137
144.5 192.5 137
164.5 219.5 137
248.5 328.5 137
157.5 181.5 139.5 159.5 53
144.5 192.5 139.5 159.5 53
164.5 219.5 139.5 159.5 53
248.5 328.5 139.5 159.5 53
155.5 48.5
155.5 48.5
155.5 48.5
155.5 48.5
110
150
Assembly C (F800 in 3-pole only)
MI
G1
3P
96
80
80
180
80
80
180
80
180
180
G2
3P
96
96
96
96
80
80
80
80
80
180
G3
3P
0
23
23
14
0
0
9 p
0
G4
3P
60
60
60
60
83
83
83
83
83
74
G5
3P
60
83
83
74
83
83
74
83
74
74
Catalog #
LA9FH4H
LA9FJ4H
LA9FK4H
LA9FL4H
LA9FJ4J
LA9FK4J
LA9FL4J
LA9FK4K
LA9FL4K
LA9FL4L
4P
96
80
4P
96
96
96
96
80
80
80
4P
0
0
0
9 p
0
0
9 p
0
9 p
0
4P
83
83
83
83
83
83
83
83
83
74
4P
83
83
83
74
83
83
74
83
74
74
140
240
80
140
240
140
240
240
140
140
240
9 p
0
H
H1
J1
3P
J2
3P
min
250
260
280
330
260
280
325
300
345
380
max
380
380
380
380
380
380
380
380
380
380
min
130
110
130
170
60
100
140
120
160
200
max
260
230
230
220
200
200
195
200
195
200
4P
4P
LA9FH4H
LA9FJ4H
LA9FK4H
LA9FL4H
LA9FJ4J
LA9FK4J
LA9FL4J
LA9FK4K
LA9FL4K
LA9FL4L
157.5 181.5 157.5 181.5
144.5 192.5 157.5 181.5
164.5 219.5 157.5 181.5
248.5 328.5 157.5 181.5
144.5 192.5 144.5 192.5
164.5 219.5 144.5 192.5
248.5 329.5 144.5 192.5
164.5 329.5 164.5 219.5
248.5 328.5 164.5 219.5
248.5 328.5 248.5 328.5
250
191
160
160
191
702 (LC F780), 862 (LC1F7804)
X1 and mounting holes, see page 211.
p
In this case, G4 is greater than G5
213
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ F-Line Contactors and Starters
Dimensions and Mounting
Contactors Type LC1F
Mounting
Dimensions shown in mm (mm x 0.0394 = inches)
LC1F115 to LC1F330
On panel
On pre-slotted mounting plate AM1PA, AM1PB, AM1PC
On rails DZ5MB on 120 mm center
■
3xØ6.5
G
DZ5MF5
AF1EA6
G
=
=
J1
J
G
c
15
c
c
LC1F115,
LC1F150
LC1F185,
LC1F225
LC1
LC1
LC1F115,
LC1F150
LC1F185,
LC1F225
LC1
F265
LC1
F330
LC1F115,
LC1F150
LC1F185,
LC1F225
LC1
F265
LC1
F330
F265
213
213
96
F330
219
219
96
3P 171
4P 171
3P 80
4P 80
3P 26.5
4P 45
3P 57
4P 75.5
181
181
80
3P 171
4P 171
3P 80
4P 80
181
181
80
213
213
96
219
219
96
3P 171
181
213
213
96
219
219
96
c q
G
c q
c q
4P 171
3P 80
4P 80
181
80
G
G
80
96
96
80
96
96
80
96
96
29
44.5
68.5
61.5
85.5
44.5
68.5
61.5
85.5
J
49
59.5
79.5
J1
c
q
Power terminal protection shroud (see page 198)
See X1, minimum electrical clearance on pages 210 and 211.
LC1F
LC1F115 to LC1F330
LC1F400 to LC1F800
On 2 notched rails AM1-EC•••
■
AM1EC200
AF1CD081 + AF1VC820
AF1CD101+
AF1VC10
■
AF1CD081+
AF1VC820
AF1CD061+
AF1VA618
AF1-CD061
AF1-VA618
M6
AF1VA618
M6
LA9-F100
Ø8.5
M6
Ø10.5
=
=
G
G
G1
G2
c
25
AM1EC200
AM1EC200
G3
LC1F115,
LC1F150
LC1F185,
LC1F225
LC1F265
LC1F330
LC1F400
LC1F500
LC1F630
LC1F780
LC1F800
3P
165 p
176
176
80
80
–
207
207
96
96
–
213
213
96
96
–
219
219
–
232
232
–
255
255
–
255
255
–
c
4P
165 p
255
3P
80
80
–
–
–
G (M6)
4P
–
–
–
–
–
3P
G1 (Ø 8.5)
4P
80
80
–
80
140
–
–
–
–
–
–
–
–
–
–
–
3P
G2 (Ø 10.5)
4P
–
–
–
–
180
240
See page 211
1/129
–
–
–
–
–
–
–
f
AF1CD••• and AF1VA•••.
k
p
This AM1EC200 upright is required when G2 or G3 is greater than 700 mm.
Add 6 mm with timer block on LC1F.
214
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ F-Line Contactors and Starters
Dimensions and Mounting
Contactors Type LC1F
Cabling Accessories
Dimensions shown in mm (mm x 0.0394 = inches)
Paralleling links (set of 4)
LA9FF, FG, FH602
LA9FF602
LA9FG602
LA9FH602
LA9FK602
LA9FL602
a
a
25
45
30
4
30
55
35
5
40
60
40
8
50
85
55
10
22
70
14
22
11
11
60
100
65
10
26
85
17
26
13
14
c
¯2
=
=
b
b1
c
G
–
–
–
H
37.5
12.5
–
45
15
–
52.5
15
–
¯1
=
H1
H2
Ø1
Ø2
LA9FK, LA9FL602
a
6.5
11
9
11
13
c
=
G
11
¯2
¯1
Bars for 3-pole star connection LA9F•601
LA9FF601
LA9FG601
LA9FH601
LA9FK601
LA9FL601
c
a
a
89
100
121
140
30
5
200
40
8
b
c
15
20
20
3
3
5
¯
Ø
6.5 x 8.5
8.5 x 10.5
10.5 x 13
11
13
Brackets LA9F•981 (set of 3) for back connection
LA9FF981
LA9FG981
LA9FJ981
LA9FK981
LA9FL981
a
15
18
3
20
23
3
25
30
35
5
40
48
8
b
29
b1
c
4
¯
42
24
10.5
6.5
45
26
13
9
55
52
26
20
11
86
45
28
13
a
G
H
Ø
32.5
16.5
11
¯
Brackets LA9F•979 (set of 3) for side connection
LA9FF979
LA9FG979
LA9FJ979
LA9FK979
LA9FL979
40
a
15
54
5
20
58
5
25
63.5
6
30
68
6
b
117
10
b1
c
80
24
20
36
6.5
92
28
22
39
9
120
37
29
41
11
120
37
29
42
11
130
37.5
35
a
G
G1
H
¯
76
Ø
13
Wide range brackets LA9F•980 (set of 3)
LA9FF980
LA9FG980
LA9FJ980
LA9FK980
LA9FL980
c
a
a
35
40
50
60
100
c1
=
G
=
b
70.5
40
82.5
45
98.5
55
114
154
b1
c
65
85
29
29
33
33
43
c1
G
3
3
5
5
10
18
20
25
29
53
H
18
20
22
26
40
■
H1
H2
Ø
10
12
14
17
20
60.5
6.5
Ø7 x 10
72.5
9
84.5
11
97
132
11
13
Ø
c
Ø9 x 12
Ø11 x 14
Ø12.5 x 15
Ø12.5 x 15
215
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ F-Line Contactors and Starters
Schematics
Schematics
Contactors Type LC1F
Schematics
2-, 3-, and 4-pole contactors
LC1F115 to LC1F630 (coil LX1F AC)
LC1F115 to LC1F630 (coil LX4F DC)
LC1F780, 3- and 4-poles AC or DC
LC1F115 to LC1F265 (coil LX9F AC)
LC1F800 (coil LX8F AC/DC)
Front-mounting contact blocks
Instantaneous auxiliary contacts
1 N.O. LA1DN10 c
1 N.C. LA1DN01 c
1 N.O. + 1 N.C. LA1DN11
2 N.O. LA1DN20
2 N.C. LA1DN02
2 N.O. + 2 N.C. LA1DN22
2 N.O. + 2 N.C. including 1 N.O. + 1 N.C.
make before break LA1DC22
1 N.O. + 3 N.C. LA1DN13
4 N.O. LA1DN40
4 N.C. LA1DN04
3 N.O. + 1 N.C. LA1DN31
c
Items in brackets are for blocks mounted on right-hand side of contactor.
Front-mounting contact blocks
Instantaneous auxiliary contacts with terminal referencing conforming to standard EN 50012 (References: pages 218 and 219)
1 N.O. + 1 N.C.
LA1DN11P
1 N.O. + 1 N.C.
LA1DN11G
1 N.O. + 1 N.C.
LA1DN11M
2 N.O. + 2 N.C.
LA1DN22P
2 N.O. + 2 N.C.
LA1DN22G
2 N.O. + 2 N.C.
LA1DN22M
Front-mounting contact blocks
Dust and damp protected instantaneous auxiliary contacts
2 N.O. (24-50 V)
LA1DX20
2 N.O. (5-24 V)
LA1DY20
2 N.O. protected (24-50 V) + 2 N.O. standard
LA1DZ40
2 N.O. protected (24-50 V) + 1 N.O. + 1 N.C. standard
LA1DZ31
Front-mounting contact blocks
Time delay auxiliary contacts
OnDelay 1 N.O. + 1 N.C. LA2DT•
Off Delay 1 N.O. + 1 N.C. LA3DR•
On Delay N.C. contact with N.O. break before make
contact LA2DS•
Interface module
LA4FWB
Standard AC coils
LX1FF,FG, FJ to LX1FL
LX1FH0202 to LX1FH0362
LX1FX
LX1FH0422 to LX1FH3802
LX1FH4402 to LX1FH10002 Rectifier supplied and
LX8F8•W (AC / DC) attached to the contactor
K
B2
A1
A1
A2
A1 A2
03 A1
A2
−
+
A1
A2 A1
A2
A1
A2
A1
A2
−
E2
E1 +
Special AC coils
LX9FF, LX9FG
DC coils
LX4FF, FG, FH, FJ, FK, FL, FX c
LX9FH•••2
A1 B1 A2/B2
LX9FJ, LX9FK, LX9FL
A1
A2
A1
A2
■
f
Breaking on AC side
Drop-out time 50 ms
Breaking on DC side
Drop-out time 20 ms
−
+
c
2 coils in series
B1
A1
B2
A2
■
A1
A2
A1
A2
q
216
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ F-Line Contactors and Starters
Schematics
Reversing Contactors and Changeover Contactors
Reversing contactors for motor control, horizontally mounted
2 x LC1F
Reversing contactors for motor control, vertically mounted
2 x LC1F
L3
L2
L1
Dashed lines indicate suggested customer wiring to electrically interlock
coils using quantity of 2 LA1DN•1 auxiliary contact blocks.
Changeover contactor pairs for distribution, horizontally mounted
2 x LC1F
Changeover contactor pairs for distribution, vertically mounted
2 x LC1F
N
L3
L2
L1
Electrical interlocking of reversers with:
mechanical interlock LA9F•••
without integrated electrical contacts
Ð KM2
Ð KM1
Ð KM1
Ð KM2
Note: Must use quantity of 2 LA1DN•1 auxiliary contact blocks to provide electrical interlocking of coils. See diagram with dashed lines above.
217
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ F-Line Contactors and Starters
LR9F Solid State Overload Relays - Characteristics
LR9F Solid State Overload Relays - Characteristics
Introduction
The LR9F solid state overload relay provides the accurate, repeatable protection of a solid state device,
while still maintaining the ease of installation of a traditional overload relay.
The LR9F provides protection against:
•
•
•
•
Motor Overload
Failure or Phase unbalance of 30% or greater
Prolonged starting times
Locked rotor conditions
The LR9F overload relays have 8 current ranges, spanning 30 amps up to 630 amps. They are available
in Class 10 trip or Class 20 trip models. The device is manually reset via a clearly labeled button on the
front face. A separate attachment is available for remote reset or test tripping of the relay. All units
incorporate both a normally open and normally closed contact for control circuit wiring.
The LR9F is designed to directly mount on the load side of a LC1F contactor, minimizing space and wiring
time. Lugs for the LR9F are ordered separately (see page 220 for selection). For LR9F relays up to 185 amps,
an interposing touch-safe terminal block may be ordered in place of lugs, making power wiring even easier.
3
1. Trip Current Adjustment Dial
2. Stop Button
3. Test Button
4. Reset Button
5. Trip Indicator
6. Clip-on Legend
7. Transparent Cover with Sealing Provisions
6
5
4
2
LR9 F5369
TRIPPED
ELECTRONIC MOTOR PROTECTION
STOP RESET
TEST
NO
Ir(A)
125
105
1
7
90
150
NC
98
97
95
96
LR9F Tripping Curve
Average operating times depending on multiples of the current setting
Class 10 Class 20
Tripping time in seconds
Tripping time in seconds
1000
100
10
1000
100
10
1
2
1
2
1
1
0
1
1,12 2
3
4
5
6
7
8
9
10
11
12
0
1 1,12
2
3
4
5
6
7
8
9
X times current setting (Ir)
X times current setting (Ir)
1
2
Cold state curve
Hot state curve
218
© 2001-2004 Schneider Electric All Rights Reserved
08/04
TeSys™ F-Line Contactors and Starters
LR9F Solid State Overload Relays - Characteristics
Environment
IEC 60947-1, 60947-4-1, 255-8, and VDE
0660EN 60947-1. 60947-4-1
Meets the essential requirements
of LV & EMC directives.
Conforming to standards
EI64353
NKCR
LR43364
3211 03
Approvals
UL508; CSA 22-2, No.14; PTB Pending
IP 20 - Protection against direct finger contact
with LA9F103 insulated terminal blocks or
LA9F7/LA7F7 shrouds
Degree of protection
Protective treatment
Conforming to VDE 0106
Standard version
Storage
"TH"
Ambient air temperature
around the device
(conforming to IEC 60255-8)
−40 to + 85 °C (−40 to +185 °F)
Normal operation
Without derating
−20 to + 55 °C (-4 to +131 °F)
Maximum operating altitude
m
2000
Operating positions
without derating
In relation to normal
vertical mounting plane
All positions
13 g - 11 ms
2 g
Permissible acceleration
conforming to IEC 60068-2-7
Shock resistance
Permissible acceleration
conforming to IEC 60068-2-6
Vibration resistance
Dielectric strength at 50 Hz
Impulse withstand voltage
Conforming to IEC 60255-5
Conforming to IEC 60801-5
kV
kV
6
4
Resistance to electrostatic
discharges
8 (in air)
6 (in indirect mode)
Conforming to IEC 60801-2
kV
Resistance to radio-frequency
conducted disturbances
Conforming to IEC 60801-3
and NF C 46-022
V/m
kV
10
Resistance to fast transient
currents
Conforming to IEC 60801-4
EN50081-1 & 2, EN50082-2
2
Electromagnetic compatibility
Meets test requirements
Power Circuit Characteristics
F5•63
F5•67
F5•69
Relay Type
LR9F
V
F5•57
F5•71
F7•75
F7•79
F7•81
Rated insulation voltage (Vi)
Conforming to IEC 60947-4
1000
1000
Rated operational voltage (Ve) Conforming to VDE 0110 gr C
V
Rated impulse withstand
Conforming to IEC 60947-1
voltage (Vimp)
kV
8
Rated operational current (Ie)
A
30 to 630
50/60
20 (0.78) 25 (0.98) 25 (0.98) 30 (1.18) 40 (1.57) 40 (1.57)
Frequency limits
Of the operating current
Width of terminal lug
Clamping screw
Hz
mm (in)
M6
90
10
M8
160
18
M10
310
35
M10
310
35
M10
310
35
M12
515
58
Power circuit connections
Ib • in
N • m
Tightening torque
Auxiliary contact characteristics
Rated thermal current
A
5
Minimum
Maximum
1 x 4.0
2 x 2.5
2 x 12
1 conductor
2 conductors
1 conductor
2 conductors
1 conductor
2 conductors
1 conductor
2 conductors
1 x 0.75
2 x 1.0
1 x 18
2 x 16
1 x 0.75
2 x 1.0
1 x 0.75
2 x 1.0
11
mm2
AWG
mm2
mm2
Stranded cable
without cable end
2 x 14
Control circuit
connections
1 x 2.5
2 x 1.5
1 x 2.5
2 x 1.0
Stranded cable
with cable end
Solid cable
Ib • in
N • m
V
Tightening torque
1.2
24
48
110
400
110
50
220
600
220
45
380
600
440
25
600
600
–
AC control
Maximum sealed
consumption of coils
on controlled contactors
VA
100
200
V
24
48
DC control
W
100
100
–
219
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ F-Line Contactors and Starters
LR9F Solid State Overload Relays - Selection
LR9F Solid State Overload Relays - Selection
Three-Phase Overload Relays c
Current Setting Range
Amps
For Direct Mounting To Contactor Class 10 Trip q
Class 20 Trip q
Catalog Number
LC1••••/CR1F••••
F115 to F185
F115 to F185
F115 to F185
F115 to F185
F185 f, F265
F265 to F500
F265 to F500
F400 to F630
Catalog Number
LR9F5357
LR9F5363
LR9F5367
LR9F5369
LR9F5371
LR9F7375
LR9F7379
LR9F7381
30 to 50
LR9F5557
LR9F5563
LR9F5567
LR9F5569
LR9F5571
LR9F7575
LR9F7579
LR9F7581
48 to 80
60 to 100
90 to 150
132 to 220
200 to 330
300 to 500
380 to 630
LR9F53•••
c
When mounting overload relays LR9F5•57 to LR9F5•71 directly beneath the contactor it is recommended that the relays be additionally supported
by a mounting plate. For sizes LR9F5•75 to LR9F7•81 use of the supporting mounting plate is mandatory. See page 221 for selection table.
IEC standard 60947-4 specifies the following trip times when the overload relay senses 7.2 times the setting current:
Class 10: between 4 and 10 seconds
q
Class 20: between 6 and 20 seconds
LR9F73•••
f
Interconnection kit LA7F407 is required to mount an LR9F•71 to an LCIF185.
Lug Kits
Lugs can be ordered either individually or in sets of six. In some cases the LR9F overload relay mounted
directly on the bottom of LC1F contactor will require a different size lug than the contactor itself. Refer
to the table below to select the appropriate size lug for your choice of contactor and overload. If all 6 lugs
(three for line side of contactor, three for load side of overload relay) are the same, Square D offers a
pre-packaged set of six lugs. If the two sizes are different, order 3 of each size lug. Mounting hardware
(screws, washers, nuts) are provided with the contactors and overload relays, not with the lugs.
DZ2F••
Cable size AWG range
Lug Catalog Number
Directly mounted to
contactor LC1••••
Overload Relay
Line side (of
contactor)
Load side (of
overload)
Line side (of contactor) Load side (of overload)
LR9F5•57 to F5•69 F115
14 to 2/0
6 to 3/0
3 ea. DZ2FF1
1 ea. DZ2FG6
1 ea. DZ2FH6
3 ea. DZ2FH1
3 ea. DZ2FJ1
3 ea. DZ2FK1
3 ea. DZ2FG1
LR9F5•57 to F5•71 F150 or F185
6 to 3/0
LR9F5•71
F265
6 to 300 MCM
6 to 300 MCM
4 to 500 MCM
2 x 2 to 600 MCM
LR9F7•75 to F7•79 F265 or F330
LR9F7•75 to F7•81 F400
LR9F7•75 to F7•81 F500
4 to 500 MCM
4 to 500 MCM
4 to 500 MCM
a
a
a
DZ2FL1
DZ2FL2
DZ2FL3
LR9F7•81
F630
3 x 2 to 600 MCM
4 to 500 MCM
a
a
Customer to obtain from local supplier.
Insulated Terminal Blocks
For contactors LC1F115, LC1F150, and LC1F185, an available touch-safe terminal block may be used
in place of lugs for power connections
LR9F73•••
Cable size
AWG range
Suitable for contactor
LC1••••/CR1••••
Suitable for overload relay
LR9•••••
Insulated terminal block
LA9F103
#6 to 300 MCM
F115, F150, F185
5•57, F5•63, F5•67, F5•69
220
© 2001-2004 Schneider Electric All Rights Reserved
08/04
TeSys™ F-Line Contactors and Starters
LR9F Solid State Overload Relays - Accessories
LR9F Solid State Overload Relays
LR9F Solid State Overload Relays
-
-
Accessories
Accessories
Mounting Plate for Overload Relay
Provides overload relay support when mounted
directly to F-Line Contactor
For use with relays:
Catalog Number
LA7F901
LR9F5•57, F5•63, F5•67, F5•69 and F5•71
LR9F7•75, F7•79 and F7•81
LA7F902
LA7F90•
Power Terminal Protection Shrouds, Single-Pole
These clear plastic protection shrouds are an effective means to meet international touch-safe requirements for
power terminals. They are designed to be used with power cables that have been bolted to the terminal.
NOTE: The protection shrouds do not attach to contactors or overload relays utilizing DZ2F lug kits.
For use with relays
LR9F5•57
Catalog Number
LA9F701
LR9F5•63, F5•67, F5•69
LR9F5•71
LA9F702
LA9F705
LA9F70•
LR9F7•75, F7•79, F7•81
LA9F703
Power Terminal Protection Shrouds, 3-Poles
For use with relays
Catalog Number
LA7F701
LR9F5•57, F5•63, F5•67, F5•69
LR9F5•71
LA7F702
LR9F7•75, F7•79, F7•81
LA7F70•
LA7F703
Connection Accessories Required (for mounting overload relays beneath reversing contactors)
Application
Set of 3 bars
Catalog Number
For relays
For contactor
LC1F115
LR9F5•57, F5•63, F5•67, F5•69
LR9F5•57, F5•63
LR9F5•71
LA7F401
LA7F402
LA7F407
LA7F403
LA7F404
LA7F404
LA7F405
LA7F406
LC1F150 and F185
LC1F185
LR9F5•71
LC1F265
LR9F7•75, F7•79
LR9F7•81
LC1F265 to F400
LC1F400
LR9F7•75, F7•79, F7•81
LR9F7•81
LC1F500
LC1F630
Marking accessories
Description
Sold in units of:
Catalog Number
LA7D903
Marker holder, snap-in
100
Control Accessories
Sold in
lots of
Description
Catalog Number
Remote electrical reset snap-on module c
1
LA7D03• q
LA7D305
LA7D901
LA7D1020
Remote reset function control by flexible cable (length = 0.5 m / 0.02")
Locking Device for “Stop” button
1
10
1
Remote Stop and/or Reset function control
Adaptor for door mounted operator
Rod (snap-off end to obtain required length,
between 17 and 120 mm)
1
1
ZA2BZ13
Operating head for spring return pushbutton
ZA2BA8602
Standard control circuit voltages
Volts
12
–
24
B
48
E
96
–
110
F
220/230
M
380/400
Q
415/440
AC 50/60 Hz
N
Consumption, inrush and sealed: < 100 VA
DC
Consumption, inrush and sealed: < 100 W
J
B
E
DD
F
M
–
–
c
q
Part number to be completed by adding coil voltage code.
The time for which the coil of remote electrical reset device LA7D03 can remain energized depends on its rest time: 1 s pulse duration with 9 s rest
time; 5 s pulse duration with 30 s rest time; 10 s pulse duration with 90 s rest time: maximum pulse duration of 20 s with rest time of 300 s. Minimum
impulse time: 200 ms.
221
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ F-Line Contactors and Starters
LR9F Solid State Overload Relays - Dimensions
LR9F Solid State Overload Relays
ccc
- Dimensions
Common side view
LR9F5•71
LR9F5•57, F5•63, F5•67, F5•69
1.9"
50mm
1.5"
1.9"
50mm
1.5"
123.5mm = 4.8"
4.7"
120mm
1.8"
1.8"
■
2.2"
■
.011"
3mm
40mm 40mm
48mm
48mm
1.9"
50mm
1.9"
50mm
Ø 11
.098"
25mm
56.8mm
.78"
4xØ5.5
20mm
4.5"
4xØ5.5
4.5"
.011"
3mm
1.8"
115mm
115mm
46.8mm
c
Terminal shroud LA9F70•.
q
6.5 x 13.5 for LR9F5•57 and 8.5 x 13.5 for
LR9F5•63, F5•67, F5•69.
Common side view
LR9F7•75, F7•79, F7•81
LR9F7•81 (for mounting beneath LC1F630)
5"
7.8"
P1
P2
127.6mm
200mm
1.6"
42.2mm
1.1"
30mm
3.1"
80mm
3.1"
80mm
Ø13
■
Ø11
4xØ 5.5
1.5"
40mm
25mm
2"
2"
.2"
6mm
51.5mm
51.5mm
2.5"
2.5"
66mm
66mm
1.5"
5.9"
151.3mm
c
Terminal shroud LA9F70•.
40mm
P1
P2
48
55
3"
76.5mm
3"
76.5mm
LR9F7•75
48
55
7.5"
193mm
LR9F7•79, F7•81
222
© 2001-2004 Schneider Electric All Rights Reserved
01/04
TeSys™ F-Line Contactors and Starters
LR9F Solid State Overload Relays - Mounting
LR9F Solid State Overload Relays - Mounting
Direct mounting beneath contactor LC1F
145 (LA7F901)
180 (LA7F902)
50 (LA7F901)
57 (LA7F902)
LA7F90•
Overload Relay
mounting plate
■
LC1 contactors
F115
With LR9 relays
F5k57, F5k63, F5k67, F5k69
F5k57, F5k63, F5k67, F5k69
F5k57, F5k63, F5k67, F5k69
F5k71
b
H1
30
30
30
40
50
40
60
60
60
70
110
H2
H3
240
246
250
273
308
279
314
317
317
346
510
76
120
120
120
120
120
120
120
120
180
180
180
F150
76
F185
76
76
F225
F265
F7k75, F7k79
108.8
76
F5k71
F7k75, F7k79
108.8
108.8
108.8
108.8
108.8
F330
F400
F500
F630
F7k75, F7k79
F7k75, F7k79, F7k81
F7k75, F7k79, F7k81
F7k81
Direct mounting beneath reversing contactors or star-delta contactors
Dimensions shown in mm
mm x.0394 = in
LA7F40•
Bus
bar
■
LC1 contactors
F115
With LR9 relays
F5•57, F5•63, F5•67, F5•69
F5•57, F5•63, F5•67, F5•69
F5•57, F5•63, F5•67, F5•69
F5•71
b
H4
H2
H3
279
283
285
319
360
332
363
364
364
390
509
60
76
120
120
120
120
120
120
120
120
180
180
180
F150
60
76
F185
60
76
80
76
F225
F265
F7•75, F7•79
100
90
108.8
76
F5•71
F7•75, F7•79
100
100
100
110
120
108.8
108.8
108.8
108.8
108.8
F330
F400
F500
F630
F7•75, F7•79
F7•75, F7•79, F7•81
F7•75, F7•79, F7•81
F7•81
c
Relay mounting plate, see page 221.
223
01/04
© 2001-2004 Schneider Electric All Rights Reserved
TeSys™ F-Line Contactors and Starters
LR9F Solid State Overload Relays - Wiring Diagrams
LR9F Solid State Overload Relays - Wiring Diagrams
Wiring Diagram
LR9F
KM1
Setting
Current
Specialized Circuit
≥ 112 %
Overload
Test
Reset
95
97
Manual Reset
A
M
3
M
KM
KM
Tripped
N
Setting the special functions of LR9F thermal overload relays
Setting the Relay
2: Stop Function
•
3
•
•
•
The Stop function is obtained by pressing the red “STOP” button (2).
6
5
4
2
Pressing the “STOP” button actuates the N.C. contact, but does not affect the N.O. contact.
The “STOP” button can be locked by installing a “U” clip (catalog number LA7D901).
LR9 F5369
TRIPPED
STOP RESET
TEST
NO
Ir(A)
3: Test Function
105
125
1
protection électronique moteur
ELECTRONIC MOTOR PROTECTION
90
150
7
NC
98
97
95
96
TRIPPED
TRIPPED
RESET
OP
ST
RE
OP
ST
TEST
Test
TEST
Trip Indicator
•
•
•
Lift the transparent cover (7) to gain access to the settings and controls.
Adjust relay by turning dial (1), which is graduated directly in amperes.
The setting can be locked by sealing of the cover (7).
•
•
The Test function is activated by pressing the red “TEST” button (3) with a screwdriver.
Pressing the “TEST” button simulates tripping of the relay and actuates both N.O. and N.C.
contacts, and also actuates the trip indicator (5).
224
© 2001-2004 Schneider Electric All Rights Reserved
01/04
CR1F/CR1B Contactors and Accessories
Magnetic Latching Contactors – Characteristics
Magnetic Latching Contactors - Characteristics
Magnetic latching contactors of both block and bar mounted types include a special electromagnet
which enables them to remain in the “on” position when the coil is no longer energized.
The special properties of magnetic latching contactors make them suitable for a large number of
applications:
Properties
•
Retention of the sequence memory in automatic control equipment in the event of a control circuit
failure.
•
Energy saving, since the source of supply to the coil does not need to supply current when the
contactor is latched in the closed state.
•
•
•
•
Change of state from “Closed” to “Open” by current signal through the coil.
Unaffected by line interference.
Utilization of contactors beyond their breaking capacity as operations are performed off Load.
Contactors are silent in the latched position.
Applications
•
•
Refineries, power stations, excitation circuits.
Contactors remaining in the closed state for long periods.
Example: refineries, power supplies, low voltage distribution.
•
•
•
Selective opening control.
No unwanted opening and closing of the main power poles.
Current carrying at voltages up to 1000 Volts.
Operation of the electromagnet
CR1F contactors
CR1F magnetic latching contactors include a double coil with 3 terminals comprising a latching winding
and an unlatching winding. The 2 windings have a common point which can necessitate special wiring
precautions when the latching supply is separate from the unlatching supply.
The power supplies may be AC or DC. For DC operation, the polarities indicated must be complied with.
Operating precautions:
•
•
•
the 2 windings must not be energized simultaneously,
a winding must not be energized continuously,
supply to the coils must be via momentary contacts.
Manual opening: If the control voltage is not present, the contactor can be unlatched manually.
CR1B contactors
CR1B magnetic latching contactors included a single coil, supplied with DC or AC through a rectifier.
Latching is obtained by direct supply of the coil in one direction of current flow.
Unlatching is obtained by a reverse current, adjusted by resistors.
LC1D contactors
For applications using smaller contactor sizes than those described in the following pages, it is possible
to obtain the same function by the addition of a mechanical latching block type LA6DK, which can be
mounted on LC1D contactors (information on D-line contactors starts on page 79).
225
01/04
© 2001-2004 Schneider Electric All Rights Reserved
CR1F/CR1B Contactors and Accessories
Magnetic Latching Contactors – Characteristics
Type
CR1F150 CR1F185 CR1F265 CR1F400 CR1F500 CR1F630 CR1BL
CR1BM
CR1BP
CR1BR
Environment
Conforming to IEC 60947-4-1, BS
775, 60947-4
V
V
1000
1500
1000
1500
1000
1500
1000
1500
1000
1500
1000
1500
1000
1500
1000
1500
1000
1500
1000
1500
Rated insulation voltage (Vi)
Conforming to VDE 0110 grC
Meets the essential
requirements of the LV &
EMC directives
Conforming to standards
IEC 60947-4, NFC 63-110, VDE 0660, BS 5424, JEM 1038
ASE, CSA, UL, BV, GL, LROS, USSR, NORSK VERITAS, RINA
E164862
LR43364
Approvals
NLDX p
3211 04 p
Conforming to IEC 60529
Conforming to VDE 0106
Standard version
Special version
IP 20 front face with shrouds LA9F
Degree of protection
Protective treatment
Protection against direct finger contact with shrouds LA9F
“TH”
“TC”
“TH”
–
Storage
-60 to +80 °C (-76 to +176 °F)
-15 to +70 °C (5 to +158 °F)
3000m (9800 ft.)
Ambient air temperature
around the device
For operation at Vc
-15 to +60°C (5 to +158°F)
Maximum operating altitude Without derating
± 30° in relation to normal vertical mounting
position
Operating positions
Without derating
± 5° in relation to normal vertical mounting position
Pole characteristics
Number of poles
3 or 4
150
3 or 4
185
3 or 4
265
3 or 4
400
3 or 4
500
3 or 4
630
1, 2, 3 or 4 1, 2, 3 or 4 1, 2, 3 or 4 1, 2, 3 or 4
AC-3, q ≤ 40 °C (104 °F)
AC-1, q ≤ 40 °C (104 °F)
AC-4, q ≤ 40 °C (104 °F)
A
A
A
750
800
700
1000
1250
800
1500
2000
1250
1800
2750
1500
Rated operational current (Ie)
(Ve ≤ 440 V)
250
275
350
500
700
1000
560
138
170
245
370
460
Rated operational current
(Ve)
Up to
V
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
Frequency limits (sine wave) of the operational current
Hz
A
A
A
A
A
A
A
A
A
A
A
A
A
A
25 to 200 25 to 200 25 to 200 25 to 200 25 to 200 25 to 200 50 to 60 50 to 60 50 to 60 50 to 60
Rated making capacity
I rms
1700
1500
1200
1100
450
2100
1800
1600
1200
600
2940
2450
2200
1700
800
4500
4000
3500
3000
1200
3600
3600
3600
2400
1700
1200
1000
400
5500
5000
4500
3560
2500
4200
4200
4200
3200
2400
1500
1200
500
6740
6300
5400
4600
3200
5050
5050
5050
4400
3400
2200
1600
630
10 000
10 000
9000
8000
4000
9600
9600
7000
4800
3500
2100
1200
800
10 000
10 000
9000
8000
4000
9600
9600
8000
5200
3800
2400
1800
1200
1200
0.18
15 000
15 000
12 000
9000
18 000
18 000
15 000
11 000
6000
220 to 440 V
I rms
500 V
Rated breaking capacity
660/690 V
1000 V
5000
For 1 s
1200
1200
1200
700
1500
1500
1500
920
2200
2200
2200
1230
950
12 000
12 000
9600
15 000
15 000
12 000
8000
For 5 s
Permissible short time rating
from cold state, no current
flowing for preceding 60
For 10 s
For 30 s
For 1 min
For 3 min
For 10 min
6400
600
740
5200
6300
minutes at q ≤ 40 °C (104 °F)
450
500
620
3600
4400
350
400
480
2800
3600
Motor circuit AC-3 (type aM)
AC-1 circuit (type gI, BS 88)
160
200
315
800 x 2 f 1000 x 2 f
1000 x 2 f 1200 x 2 f
Short-circuit protection by
fuses q ≤ 440 V k
250
315
400
500
800
1000
0.12
48
800
Average impedance per pole At Ith and 50 Hz
mΩ 0.45
0.36
12
0.32
22
0.28
45
0.18
45
0.18
0.13
290
0.09
360
Power dissipated per pole for AC-3
W
W
6
88
180
the above operational
currents
AC-1
18
26
39
70
88
120
115
–
280
–
520
–
680
–
#6 to
#4 to
2 x #2 to 3 x #2 to
Cable size (min - max)
AWG #6 to 3/0 #6 to 3/0
300mcm 500mcm 600mcm 600mcm
Cabling
Lug
DZ2 FG
lb-in 160
DZ2 FG
160
DZ2 FH
310
DZ2 FJ
310
500
–
DZ2 FK
310
DZ2 FL
510
500
–
–
–
–
–
Bolt lug to contactor
Wire pressure screw
Number of bars
–
–
–
–
Tightening torque
using DZ2F•• Lug
lb-in 200
–
200
275
500
–
–
–
–
–
–
–
2
2
3
4
mm
–
50 x 5
80 x 5
100 x 5
100 x 10
Bar c.s.a.
–
–
–
–
–
in
1.9 x 0.2 3.1 x 0.2 3.9 x 0.2 3.9 x 0.2
Bus bar connections
Bolt diameter
–
–
–
–
–
–
–
–
–
–
–
4 x Ø 8
185
4 x Ø 10 4 x Ø 10 4 x Ø 10
310 310 310
Tightening torque
lb-in –
p
f
k
CR1F150 to CR1F630 only. CR1B contactors are not UL listed or CSA certified.
Paralleling of poles must be carried out only in accordance with the fuse manufacturer's recommendations.
Select short circuit protection to meet the National Electrical Code or other local codes and standards.
226
© 2001-2004 Schneider Electric All Rights Reserved
01/04
CR1F/CR1B Contactors and Accessories
Magnetic Latching Contactors – Characteristics
Type
CR1F150 CR1F185 CR1F265 CR1F400 CR1F500 CR1F630 CR1BL
CR1BM CR1BP
CR1BR
Control circuit characteristics
AC 50 or 60 Hz
V
V
V
V
48 to 415
110 to 500
AC 400 Hz
48 to 220
110 to 500
110 to 500
–
Rated control circuit voltage
(Vc)
DC
48 to 220
DC low consumption
Energization
De-energization
48 to 220
0.85 to 1.1 Vc
0.85 to 1.1 Vc
Control voltage limits
AC and DC
Max. operating rate at
ambient temperature ≤ 40 °C In operating cycles/hour
600
120
(104 °F)
Mechanical durability
Average consumption
In millions of operating cycles
1-pole
1
VA
VA
VA
VA
VA
VA
VA
VA
VA
VA
VA
VA
VA
VA
VA
VA
W
–
–
–
–
–
–
650
1100
1650
1850
110
125
165
175
600
1000
1500
1700
100
115
150
160
–
650
1100
1650
1850
110
125
165
175
600
1000
1500
1700
100
115
150
160
–
650
1100
1650
1850
110
125
165
175
600
1000
1500
1700
100
115
150
160
–
650
1100
1650
1850
110
125
165
175
600
1000
1500
1700
100
115
150
160
–
2-pole
Energization
–
–
–
–
–
–
3-pole
1100
1100
–
1600
1600
–
1650
1650
–
1450
1450
–
1650
1650
–
2100
2100
–
4-pole
1-pole
50/60 Hz
2-pole
De-energization
3-pole
–
–
–
–
–
–
7.3
7.3
–
8
9
12
12
–
9.5
9.5
–
8
4-pole
1-pole
8
9
8
–
–
–
2-pole
Energization
–
–
–
–
–
–
3-pole
1260
1260
–
1750
1750
–
1800
1800
–
1600
1600
–
1800
1800
–
2300
2300
–
4-pole
1-pole
400 Hz and DC
2-pole
De-energization
3-pole
–
–
–
–
–
–
10
10
500
15
11
11
500
20
12
12
500
40
16
16
500
70
13
13
550
60
11
11
620
45
4-pole
Energization
3/4-pole
DC low consumption
De-energization 3/4-pole
Energization
W
–
–
–
–
ms
ms
35 to 40 35 to 40 45 to 50 40 to 75 40 to 80 40 to 80 100 to 150 100 to 150 100 to 150 100 to 150
50 to 100 50 to 100 50 to 100 50 to 100 50 to 100 50 to 100 20 to 40 20 to 40 20 to 40 20 to 40
Average operating time at Vc q
De-energization
q
The closing time is measured from the moment the coil supply is switched on to initial contact of the main poles. The opening time is measured from the moment the coil supply is switched
off to the moment the main poles separate.
NOTE: The arcing time depends on the circuit switched by the poles. For normal 3-phase applications the arcing time is usually less than 10 ms.
The load is isolated from the supply after a time equal to the sum of the opening time and the arcing time.
Auxiliary contact characteristics
Type
LA1D for contactors CR1F
10
ZC4GM for contactors CR1B
20
Conventional rated
thermal current
A
Conforming to IEC 60947-5-1
Conforming to VDE 0110 grC
V
V
660
750
Rated insulation voltage (Vi)
Cabling
Flexible or solid conductor
with or without cable end
mm2 1 x 1 min/2 x 2.5 max (1 - #16 min / 2 - # 14 max)
2 min/4 max (# 14 min / # 10 max)
Operational power of contacts LA1D for contactors CR1F
AC supply
DC supply
Electrical durability (valid for up to 2400 operating cycles/h) on an inductive
load such as the coil of an electromagnet (power factor = 0.7) = 10 times the
breaking current (power factor = 0.4).
Electrical durability (valid for up to 1200 operating cycles/h) on an inductive
load such as the coil of an electromagnet without economy resistor, the time
constant increasing with the load.
V
48
110/127
400
220/230
480
380/400
500
600
V
48
110
75
220
68
440
61
600
58
1 million operating cycles
VA 300
500
W
W
90
Occasional making capacity
VA 2600
7000
13 000
15 000
9000
700
400
260
220
170
Operational power of contacts ZC4GM for contactors CR1B
AC supply
DC supply
Electrical durability (valid for up to 2400 operating cycles/h) on an inductive load
such as the coil of an electromagnet (power factor = 0.7) = 10 times the breaking
current (power factor = 0.4).
Electrical durability (valid for up to 1200 operating cycles/h) on an
inductive load such as the coil of an electromagnet without economy
resistor, the time constant increasing with the load.
V
110/127
220
380
415/440
4000
500
V
110
120
250
800
440
230
400
500
200
360
1 million operating cycles
VA 2000
4000
23000
4000
35000
3500
35000
W
W
250
Occasional making capacity
VA 14000
45000
1600
227
01/04
© 2001-2004 Schneider Electric All Rights Reserved
CR1F/CR1B Contactors and Accessories
Magnetic Latching Contactors – Characteristics
For Utilization Category AC-1 and According to Required Electrical Durability
Maximum Operational Current (on-load factor ≥ 0.95)
Maximum operating rate: 120 operating cycles/hour
CR1
F150
CR1
F185
CR1
F265
CR1
F400
CR1
F500
CR1
F630
CR1
BL
CR1
BM
CR1
BP
CR1
BR
Contactor size
120
(250
MCM)
150
(300
MCM)
185
(350
MCM)
Cable c.s.a.
mm2
–
–
–
–
–
–
–
Number of bars
Bar c.s.a.
–
–
–
2
2
2
2
2
3
4
mm
in
30 x 5
40 x 5
60 x 5
50 x 5
80 x 5
100 x 5
100 x 5
–
–
–
1.18 x 0.2 1.57 x 0.2 2.36 x 0.2 1.96 x 0.2 3.14 x 0.2 3.93 x 0.2 3.93 x 0.2
Operational
current
in category
AC-1 at
≤ 40 °C (104 °F) A 250
≤ 55 °C (131 °F) A 250
275
275
350
300
500
430
700
580
1000
850
800
700
1250
1100
2000
1750
2750
2400
≤ 70 °C (158 °F) A 170
180
250
340
500
700
600
900
1500
2000
ambient
temperature
Increase in Operational Current by Paralleling of Poles
Apply the following multiplying factors to the current values given above; these factors take into account
the often unbalanced current distribution between poles:
•
•
•
2 poles in parallel: K = 1.6
3 poles in parallel: K = 2.25
4 poles in parallel: K = 2.8
Electrical durability (Ve ≤ 440 V)
NOTE: For 660 V, multiply the number of operating cycles by 0.8.
Millions of
operating
cycles
1
0.8
0.6
0.4
0.2
0.1
0.08
0.06
0.04
0.02
0.01
60
80
100
250
400
600
800 1000
2000
4000
275
350
500
700
1250
2750
Current broken in A
Example
Ve = 220 V, Ie = 200 A, q = 40 °C (104 °F), Ic = Ie = 200 A. 600,000 operating cycles required.
The above selection curves show the contactor rating needed: CR1F400.
228
© 2001-2004 Schneider Electric All Rights Reserved
01/04
CR1F/CR1B Contactors and Accessories
Magnetic Latching Contactors – Characteristics
For Switching the Primaries of 3-Phase Transformers
International applications only (not UL Listed or CSA certified for transformer switching)
Operating Conditions
Maximum ambient temperature: 55 °C (131 °F)
Maximum operational voltage: 1000 V, 50 to 60 Hz
When a transformer is switched on, there is generally an initial current surge which reaches its peak
value almost instantaneously and then decreases in a largely exponential manner to quickly reach its
steady state value.
The value of this current depends on:
•
The characteristics of the magnetic circuit and of the windings (cross sectional area of the core, rated
inductance, number of turns, size of the windings).
•
•
the performance of the magnetic laminations used (residual induction and saturation inductance).
the magnetic state of the circuit and the instantaneous value of the AC mains voltage at the moment
of switch-on.
The inrush current at the moment of switch-on can reach 20 to 40 times the rated current for the various
kVA power ratings in the tables below. This value is independent of the “no-load” or “on-load” state of
the transformer (the tables are based on 30 In).
The peak magnetizing current of the transformer must be lower than the values given in the tables below.
Contactor Selection
Maximum Operating Rate: 120 operating cycles /hour
Contactor size
CR1F150
CR1F185
CR1F265
CR1F400
CR1F500
CR1F630
Maximum permissible
closing current peak
A
1700
2800
3500
5500
6800
9000
220 to 230 V
380 to 400 V
415 to 440 V
500 V
25
40
50
75
100
170
190
225
270
375
140
225
250
280
315
470
50
75
90
130
55
80
100
110
140
200
CR1BP
140
Maximum operational
power in kVA c
65
95
170
660 V
80
120
150
CR1BM
200
1000 V
100
CR1BL
250
Contactor size
CR1BR
Maximum permissible
closing current peak
A
18 000
18 000
24 000
30 000
220 to 230 V
380 to 400 V
415 to 440 V
500 V
230
400
450
480
600
700
230
400
450
480
600
700
300
530
560
600
800
1000
380
660
700
750
950
1200
Maximum operational
power in kVA c
660 V
1000 V
c
Maximum operational power corresponding to a current peak at switch-on of 30 In.
229
01/04
© 2001-2004 Schneider Electric All Rights Reserved
CR1F/CR1B Contactors and Accessories
Magnetic Latching Contactors – AC or DC – Selection
Magnetic Latching Contactors - AC or DC - Selection
Power Poles
Auxiliary Contacts
Maximum thermal Rated operational
Catalog
Number
p
current in
current in
Weight lb (kg)
category AC-1
category AC-3
A
A
N.O.
3
N.O.
–
–
–
–
–
–
–
–
–
–
–
–
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
N.C.
–
–
–
–
–
–
–
–
–
–
–
–
2
1
–
2
1
–
2
1
–
2
1
–
2
1
–
2
1
–
2
1
–
2
1
–
2
1
–
2
1
–
2
1
–
2
1
–
2
1
–
2
1
–
2
1
–
2
1
–
CR1F150•
0.14 (3.500)
250
150
4
CR1F1504•
0.15 (3.800)
3
CR1F185•
0.18 (4.600)
275
350
500
700
1000
185
265
400
500
630
4
CR1F1854•
0.21 (5.400)
3
CR1F265•
0.29 (7.400)
CR1F1854•
4
CR1F2654•
0.33 (8.500)
3
CR1F400•
0.36 (9.100)
4
CR1F4004•
0.40 (10.200)
0.44 (11.300)
0.51 (12.900)
0.73 (18.600)
0.84 (21.500)
1.26 (32.000)
1.26 (32.000)
1.26 (32.000)
1.77 (45.000)
1.77 (45.000)
1.77 (45.000)
2.30 (58.000)
2.30 (58.000)
2.30 (58.000)
2.83 (72.000)
2.83 (72.000)
2.83 (72.000)
1.22 (31.000)
1.22 (31.000)
1.22 (31.000)
1.73 (44.000)
1.73 (44.000)
1.73 (44.000)
2.24 (57.000)
2.24 (57.000)
2.24 (57.000)
2.79 (71.000)
2.79 (71.000)
2.79 (71.000)
1.61 (41.000)
1.61 (41.000)
1.61 (41.000)
2.55 (65.000)
2.55 (65.000)
2.55 (65.000)
3.70 (94.000)
3.70 (94.000)
3.70 (94.000)
4.72 (120.000)
4.72 (120.000)
4.72 (120.000)
2.05 (52.000)
2.05 (52.000)
2.05 (52.000)
3.34 (85.000)
3.34 (85.000)
3.34 (85.000)
5.07 (129.000)
5.07 (129.000)
5.07 (129.000)
6.29 (160.000)
6.29 (160.000)
6.29 (160.000)
3
CR1F500•
4
CR1F5004•
3
CR1F630•
4
CR1F6304•
CR1BL31•12
CR1BL31•21
CR1BL31•30
CR1BL32•12
CR1BL32•21
CR1BL32•30
CR1BL33•12
CR1BL33•21
CR1BL33•30
CR1BL34•12
CR1BL34•21
CR1BL34•30
CR1BM31•12
CR1BM31•21
CR1BM31•30
CR1BM32•12
CR1BM32•21
CR1BM32•30
CR1BM33•12
CR1BM33•21
CR1BM33•30
CR1BM34•12
CR1BM34•21
CR1BM34•30
CR1BP31•12
CR1BP31•21
CR1BP31•30
CR1BP32•12
CR1BP32•21
CR1BP32•30
CR1BP33•12
CR1BP33•21
CR1BP33•30
CR1BP34•12
CR1BP34•21
CR1BP34•30
CR1BR31•12
CR1BR31•21
CR1BR31•30
CR1BR32•12
CR1BR32•21
CR1BR32•30
CR1BR33•12
CR1BR33•21
CR1BR33•30
CR1BR34•12
CR1BR34•21
CR1BR34•30
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
800
750
1250
2000
2750
1000
1500
1800
CR1F500
CR1BP33
230
p
For standard control circuit voltages, see page 231.
© 2001-2004 Schneider Electric All Rights Reserved
01/04
CR1F/CR1B Contactors and Accessories
Magnetic Latching Contactors – Accessories – Selection
Magnetic Latching Contactors - Accessories - Selection
For Contactors CR1F
Number of contacts
or shrouds
Description
For use on
CR1F
Catalog Number
LA1D c
Weight lb (kg)
1.27 (0.580)
1.27 (0.580)
Instantaneous auxiliary
contacts
1 to 9
Time delay auxiliary
contacts
2 to 4
CR1F
LA•D c
Insulated Terminal Blocks
provides IP20 touch-safe
protection
CR1F150 and CR1F185
AWG cable size #6 to 300mcm
Set of 2 blocks
LA9F103
0.66 (0.300)
LA1DN22
c
For selection, see pages 194 through 197.
Lug Kits
Lugs can be ordered either individually (for 2- and 4-pole contactors) or in sets of 6 (for 3-pole
contactors). Mounting hardware is provided with the contactors, not the kits.
Suitable for contactor
LC1••••/CR1••••
Suitable for overload relay
LR9••••• q
Single lug
Set of six lugs
Cable size AWG range
DZ2FF1
DZ2FG1
DZ2FH1
DZ3FJ1
DZ2FK1
DZ2FL• f
DZF2FX
DZ2FF6
DZ2FG6
DZ2FH6
DZ3FJ6
DZ2FK6
DZ2FL6
DZ2FX6
14 to 2/0
F115
none
6 to 3/0
F150, F185
F265, F330
F400
F5•57, F5•63, F5•67, F5•69
LA•DT, DS
LA9F103
DZ2F••
6 to 300 MCM
4 to 500 MCM
2 x 2 to 600 MCM
3 x 2 to 600 MCM
4 x 1/0 to 750 MCM
LR9F•71
none
F500
F7•75, F7•79
F7•81
F630, F800
F780
none
q
f
When direct mounting the LR9F to an LC1F or CR1F contactor, lugs of different sizes may be required. See page 220 for additional information.
For 3-pole F630 contactors, order DZ2FL1 for L1 and T3, DZ2FL2 for L2 and T2 and DZ2PL3 for L3 and T1 terminals.
For 4-pole F6304 contactors, order DZ2FL1 for L1 and T4, DZ2FL2 for L2, T2, L3 and T3 and DZ2FL3 for L4 and T1 terminals.
Description
Application
Catalog Number
For assembly of reversing contactors and
changeover contactor pairs
Mechanical interlock and power connections
See pages 190 to 193.
For Contactors CR1B
Description
Application
Catalog number
EZ2LB0601
Weight lb (kg)
Mechanical interlock with
mounting accessories p
For vertical assembly of reversing contactors
and changeover contactor pairs
3.44 (1.560)
For mounting on 120 or 150 mm center
(4.72" or 5.91")
Kit containing 2 bar mounting brackets
LA9B103
3.57 (1.620)
p
Positive mechanical interlocking between two vertically-mounted contactors with identical or different ratings. Connecting rods and cranks
assembled on right-hand side, crank pins on the pole side. Vertical mounting center distance between the two contactors: 600 mm (23.62").
Coil Selection
Volts
48
110
125
127
220
230
240
250
380
400
415
440
500
For contactors CR1F
AC 50/60 Hz
AC 400 Hz
E7
F7
–
–
–
–
G7
M7
M7
M7
M7
–
U7
–
–
–
–
–
Q7
–
Q7
–
N7
–
–
–
–
–
–
–
–
–
E7
F7
G7
M7
DC
E7
F7
G7
M7
–
–
–
–
DC low consumption
For contactors CR1B
AC 50 to 400 Hz
DC
EZ7
FZ7
GZ7
MZ7
–
–
–
–
F
–
G
–
M
M
–
U
–
Q
–
V
–
N
–
R
S
FD
GD
MD
UD
VcD
RD
SD
EZ2LB0601
231
01/04
© 2001-2004 Schneider Electric All Rights Reserved
CR1F/CR1B Contactors and Accessories
Magnetic Latching Contactors – Mechanical Interlocks and Power Connections
Magnetic Latching Contactors - Mechanical Interlocks and Power Connections Components for assembling reversing contactors and changeover pairs CR1F
Horizontally or Vertically Mounted
Horizontally mounted
Mechanical interlocks
Sets of power connections
Reversers assembled
using 2 contactors of
identical rating type:
CR1F150
LA9F•970
Reversing contactors
LA9F•976
3 or 4-pole changeover contactor pairs
LA9F•977 or LA9F•982
CR1F185
CR1F265
CR1F400
CR1F500
CR1F630
Vertically mounted
Mechanical interlocks
Reversers assembled
using 2 contactors of
identical rating type:
CR1F150
LA9FF4F
LA9FG4G
Assembly A
LA9FH4H
LA9FJ4J
LA9FK4K
LA9FL4L
Assembly C
CR1F185
CR1F265
CR1F400
CR1F500
CR1F630
Reversers assembled
using 2 contactors of
different ratings type:
CR1F150
CR1F185
CR1F265
LA9FG4F
Assembly A
LA9FH4F
LA9FJ4F
LA9FK4F
LA9FL4F
LA9FH4G
LA9FJ4G
LA9FK4G
LA9FL4G
Assembly B
LA9FJ4H
LA9FK4H
LA9FL4H
LA9FK4J
LA9FL4J
LA9FK4K
Assembly C
CR1F400
CR1F500
CR1F630
Reversers assembled
using 3 contactors of
identical or different
ratings
LA9F•4•4•
F150
F185
F265
F400
F500
F630
CR1-F500
CR1-F265
CR1-F185
A
Warning: the contactor
ratings must be in
descending order from
top to bottom.
F150 F185 F265 F400 F500 F630
B
C
F150
F185
F265
F400
F500
F630
232
© 2001-2004 Schneider Electric All Rights Reserved
01/04
CR1F/CR1B Contactors and Accessories
Magnetic Latching Contactors – Mechanical Interlocks and Power Connections
Components for Assembling Reversing Contactors and Changeover Pairs CR1F
Reversers assembled using 2 contactors of identical rating
Set of power connections
Mechanical Interlock
Contactor Type
Catalog Number
Weight lb (kg)
Kit Catalog Number
Weight lb (kg)
Horizontally mounted
CR1F150
LA9FF976
LA9FG976
LA9FH976
LA9FJ976
LA9FK976
LA9FL976
0.02 (0.600)
0.03 (0.780)
0.05 (1.500)
0.08 (2.100)
0.09 (2.350)
0.15 (3.800)
LA9FF970
LA9FG970
LA9FJ970
LA9FJ970
LA9FJ970
LA9FL970
0.13 (0.060)
0.13 (0.060)
0.31 (0.140)
0.31 (0.140)
0.31 (0.140)
0.33 (0.150)
CR1F185
CR1F265
CR1F400
CR1F500
For assembly of
CR1F630
3-pole reversing contactors
for motor control c
Vertically mounted
CR1F150
k
k
k
k
k
k
LA9FF4F
LA9FG4G
LA9FH4H
LA9FJ4J
LA9FK4K
LA9FL4L
0.76 (0.345)
0.77 (0.350)
2.33 (1.060)
2.64 (1.200)
2.64 (1.200)
2.68 (1.220)
CR1F185
CR1F265
CR1F400
CR1F500
CR1F630
Horizontally mounted
CR1F1504
CR1F1854
CR1F2654
CR1F4004
CR1F5004
CR1F6304
Vertically mounted
CR1F1504
CR1F1854
CR1F2654
CR1F4004
CR1F5004
CR1F6304
LA9FF977
LA9FG977
LA9FH977
LA9FJ977
LA9FK977
LA9FL977
0.01 (0.460)
0.02 (0.610)
0.04 (1.200)
0.07 (1.800)
0.09 (2.300)
0.13 (3.400)
LA9FF970
LA9FG970
LA9FJ970
LA9FJ970
LA9FJ970
LA9FL970
0.13 (0.060)
0.13 (0.060)
0.31 (0.140)
0.31 (0.140)
0.31 (0.140)
0.33 (0.150)
For assembly of 4-pole
changeover contactor pairs
for distribution
k
k
k
k
k
k
LA9FF4F
LA9FG4G
LA9FH4H
LA9FJ4J
LA9FK4K
LA9FL4L
0.76 (0.345)
0.77 (0.350)
2.33 (1.060)
2.64 (1.200)
2.64 (1.200)
2.68 (1.220)
Reversers assembled using 2 contactors of different ratings
Set of Power Connections
Catalog Number
at top
Mechanical Interlock
Contactor Type
(vertically-mounted) q
Weight (kg)
(kg x 2.2 = lbs)
Kit Catalog Number
at bottom
CR1F185 or F1854
CR1F265 or F2654
CR1F400 or F4004
CR1F500 or F5004
CR1F630 or F6304
CR1F265 or F2654
CR1F400 or F4004
CR1F500 or F5004
CR1F630 or F6304
CR1F400 or F4004
CR1F500 or F5004
CR1F630 or F6304
CR1F500 or F5004
CR1F630 or F6304
CR1F630 or F6304
LA9FG4F
LA9FH4F
LA9FJ4F
LA9FK4F
LA9FL4F
LA9FH4G
LA9FJ4G
LA9FK4G
LA9FL4G
LA9FJ4H
LA9FK4H
LA9FL4H
LA9FK4J
LA9FL4J
LA9FL4K
0.77 (0.350)
1.92 (0.870)
2.05 (0.930)
2.07 (0.940)
2.07 (0.940)
1.89 (0.860)
2.07 (0.940)
2.07 (0.940)
2.09 (0.950)
2.49 (1.130)
2.49 (1.130)
2.51 (1.140)
2.64 (1.200)
2.66 (1.210)
2.66 (1.210)
CR1F150 or F1504
For assembly of 3 or 4-pole
changeover contactor pairs
for distribution
CR1F185 or F1854
CR1F265 or F2654
CR1F400 or F4004
CR1F500 or F5004
Using 3 contactors (vertically mounted) of identical or different rating
The contactor ratings must be in descending order from top to bottom
Mechanical interlock kit catalog number f
LA9F•4•4•
For assembly of 3 or 4-pole
reversing contactors
c
k
q
f
A 3-pole reversing contactor for motor control can be converted into a 3-pole changeover contactor pair by removing the upper connecting links.
All power connections to be made by the customer.
With identical or different number of poles. Power connections to be made by the customer.
Complete the catalog number by replacing the first dot with the code for the upper contactor, the second dot with the code for the middle contactor,
and the third dot with the code for the lower contactor; see the table below for the codes for the contactors.
Contactors
CR1F150
CR1F185
CR1F265
CR1F400
CR1F500
CR1F630
Code
F
G
H
J
K
L
For example, mechanical interlock for reversing contactor made up of 3 different contactors: CR1F500 top, CR1F265 middle, and CR1F185 lower:
LA9F•4•4• becomes LA9FK4H4G.
233
01/04
© 2001-2004 Schneider Electric All Rights Reserved
CR1F/CR1B Contactors and Accessories
Magnetic Latching Contactors – Coils for Contactors CR1F
Magnetic Latching Contactors - Coils for Contactors CR1F
Standard Coils
Usual voltages
Resistance of winding at 20 °C (68 °F)
50 to 400 Hz
or DC
V
50 Hz, 60 Hz
Latching
Unlatching
Catalog Number
Voltage Code
Weight lb (kg)
V
Ω
Ω
For contactors CR1F150
48
–
1.98
230.8
1453
1788
4098
5139
6544
12447
16717
LX0FF005
LX0FF006
LX0FF007
LX0FF020
LX0FF008
LX0FF009
LX0FF010
LX0FF011
E7
F7
G7
L7
0.97 (0.440)
0.97 (0.440)
0.97 (0.440)
0.97 (0.440)
0.97 (0.440)
0.97 (0.440)
0.97 (0.440)
0.97 (0.440)
110
–
9.35
127
–
11.61
23.50
37.55
45.16
114.10
139.50
208
–
LX0FF009
220/230
–
M7
U7
Q7
N7
–
–
–
240
380/400
415
For contactors CR1F185
48
–
1.42
220
LX0FG005
LX0FG006
LX0FG007
LX0FG020
LX0FG008
LX0FG009
LX0FG010
LX0FG011
E7
F7
G7
L7
1.23 (0.560)
1.23 (0.560)
1.23 (0.560)
1.23 (0.560)
1.23 (0.560)
1.23 (0.560)
1.23 (0.560)
1.23 (0.560)
110
–
6.92
1339
1676
3169
4729
4729
11885
14305
127
–
8.45
208
–
21.30
26.27
32.95
82.29
102.30
220/230
–
M7
U7
Q7
N7
–
–
–
240
380/400
415
For contactors CR1F265
48
–
1.34
183.4
1031
1325
2654
4090
5002
11803
15006
LX0FH005
LX0FH006
LX0FH007
LX0FH020
LX0FH008
LX0FH009
LX0FH010
LX0FH011
E7
F7
G7
L7
1.71 (0.780)
1.71 (0.780)
1.71 (0.780)
1.71 (0.780)
1.71 (0.780)
1.71 (0.780)
1.71 (0.780)
1.71 (0.780)
110
–
6.90
127
–
8.56
208
–
20.20
25.77
33.03
78.39
102.9
220/230
–
M7
U7
Q7
N7
–
–
–
240
380/400
415
For contactors CR1F400
48
–
1.32
90.5
LX0FJ005
LX0FJ006
LX0FJ007
LX0FJ020
LX0FJ008
LX0FJ009
LX0FJ010
LX0FJ011
E7
F7
G7
L7
2.47 (1.120)
2.47 (1.120)
2.47 (1.120)
2.47 (1.120)
2.47 (1.120)
2.47 (1.120)
2.47 (1.120)
2.47 (1.120)
110
–
8.09
813
127
–
9.79
1027
2643
3309
4074
9380
11 763
208
–
24.40
30.14
37.02
94.80
121.10
220/230
–
M7
U7
Q7
N7
–
–
–
240
380/400
415
For contactors CR1F500
48
–
1.57
166
LX0FK005
LX0FK006
LX0FK007
LX0FK020
LX0FK008
LX0FK009
LX0FK010
LX0FK011
E7
F7
G7
L7
2.70 (1.220)
2.70 (1.220)
2.70 (1.220)
2.70 (1.220)
2.70 (1.220)
2.70 (1.220)
2.70 (1.220)
2.70 (1.220)
110
–
7.53
916
127
–
9.56
1159
2981
3733
4595
10 570
13 256
208
–
23.60
28.81
35.67
89.56
112.06
220/230
–
M7
U7
Q7
N7
–
–
–
240
380/400
415
For contactors CR1F630
48
–
0.87
204
LX0FL005
LX0FL006
LX0FL007
LX0FL020
LX0FL008
LX0FL009
LX0FL010
LX0FL011
E7
F7
G7
L7
3.21 (1.460)
3.21 (1.460)
3.21 (1.460)
3.21 (1.460)
3.21 (1.460)
3.21 (1.460)
3.21 (1.460)
3.21 (1.460)
110
–
5.20
1423
1830
2961
4603
5658
10 676
13 003
127
–
6.45
208
–
20.20
25.36
25.36
60.95
77.97
220/230
–
M7
U7
Q7
N7
–
–
–
240
380/400
415
LX0FH009
234
© 2001-2004 Schneider Electric All Rights Reserved
01/04
CR1F/CR1B Contactors and Accessories
Magnetic Latching Contactors – Coils for Contactors CR1F
Special Coils
Coils with two windings with common point, allowing the use of two separate power sources for latching and unlatching.
Coil voltages
at 50 Hz, 60 Hz, 400 Hz or DC
Resistance of winding
at θ = 20 °C (68 °F)
For
contactors
Catalog
Number
Voltage code
Weight lb (kg)
Latching
V
Unlatching
Latching
Ω
Unlatching
V
Ω
CR1F150
CR1F185
CR1F265
CR1F400
CR1F500
CR1F630
220
24
24
24
24
24
24
29.5
26.5
26
39.5
19
LX0FF224
LX0FG224
LX0FH224
LX0FJ224
LX0FK224
LX0FL224
MB7
MB7
MB7
MB7
MB7
MB7
0.01 (0.440)
0.02 (0.560)
0.03 (0.780)
0.04 (1.120)
0.05 (1.220)
0.06 (1.460)
220
220
29.5
23
220
30
220
29
26
220
26
41
LX0FF020
Coils with Low-Inrush Consumption
Resistance of winding
at θ = 20 °C (68 °F)
Usual voltages
DC
Catalog
Number
Latching
Unlatching
Voltage code
Weight lb (kg)
V
Ω
Ω
For contactors CR1F150
48
4.56
140.56
706.44
1086.36
3342.51
LX0FF055
LX0FF056
LX0FF057
LX0FF058
EZ7
FZ7
GZ7
MZ7
0.01 (0.440)
0.01 (0.440)
0.01 (0.440)
0.01 (0.440)
110
22.37
35.54
89.85
127
220
For contactors CR1F185
48
5.19
106.54
536.26
732.64
2378.62
LX0FG055
LX0FG056
LX0FG057
LX0FG058
EZ7
FZ7
GZ7
MZ7
0.02 (0.570)
0.02 (0.570)
0.02 (0.570)
0.02 (0.570)
110
25.50
32.75
102.44
127
220
For contactors CR1F265
48
5.19
25
74.26
LX0FH055
LX0FH056
LX0FH057
LX0FH058
EZ7
FZ7
GZ7
MZ7
0.03 (0.800)
0.03 (0.800)
0.03 (0.800)
0.03 (0.800)
110
364.61
458.45
1344.46
127
30.98
97.89
220
For contactors CR1F400
48
5.05
36.36
LX0FJ055
LX0FJ056
LX0FJ057
LX0FJ058
EZ7
FZ7
GZ7
MZ7
0.04 (1.150)
0.04 (1.150)
0.04 (1.150)
0.04 (1.150)
110
25.39
31.86
98.19
171.49
221.20
648.79
127
220
For contactors CR1F500
48
4.42
41
LX0FK055
LX0FK056
LX0FK057
LX0FK058
EZ7
FZ7
GZ7
MZ7
0.05 (1.270)
0.05 (1.270)
0.05 (1.270)
0.05 (1.270)
110
22.74
28.25
85.12
193.36
313.60
918.68
127
220
For contactors CR1F630
48
3.94
59.17
LX0FL055
LX0FL056
LX0FL057
LX0FL058
EZ7
FZ7
GZ7
MZ7
0.06 (1.500)
0.06 (1.500)
0.06 (1.500)
0.06 (1.500)
110
127
220
19.36
25.39
74.44
365.33
452.27
1071.43
235
01/04
© 2001-2004 Schneider Electric All Rights Reserved
CR1F/CR1B Contactors and Accessories
Magnetic Latching Contactors – Coils for Contactors CR1B
Magnetic Latching Contactors - Coils for Contactors CR1B
Coils with “TC” Treatment f
Usual voltages
Resistance at
θ = 20 °C (68 °F)
DC
AC 50 to 400 Hz
V
Catalog Number
Weight lb (kg)
V
Ω
For contactors CR1B•31
–
110 to 120
19.7
25.2
77.2
94
WB1KB140
WB1KB134
WB1KB136
WB1KB139
WB1KB125
WB1KB126
WB1KB138
2.47 (1.120)
2.47 (1.120)
2.47 (1.120)
2.47 (1.120)
2.47 (1.120)
2.47 (1.120)
2.47 (1.120)
110 to 125
–
–
220 to 240
220
–
WB1KB•••
250
–
128
197
257
–
380 to 400
415 to 440
–
For contactors CR1B•32
–
110
9.6
WB1KB133
WB1KB121
WB1KB140
WB1KB124
WB1KB122
WB1KB136
WB1KB125
WB1KB137
2.47 (1.120)
2.47 (1.120)
2.47 (1.120)
2.47 (1.120)
2.47 (1.120)
2.47 (1.120)
2.47 (1.120)
2.47 (1.120)
110
120 to 127
–
11.4
19.7
32.5
49.7
77.2
128
160
125
–
220/230
240
220
250
–
–
380 to 400
415 to 440
–
For contactors CR1B•33
–
110
7.2
9.6
11.4
32.5
61
WB1KB123
WB1KB133
WB1KB121
WB1KB124
WB1KB135
WB1KB139
WB1KB125
2.47 (1.120)
2.47 (1.120)
2.47 (1.120)
2.47 (1.120)
2.47 (1.120)
2.47 (1.120)
2.47 (1.120)
110
120 to 127
125
–
220
240
250
–
–
380 to 415
440
94
–
128
For contactors CR1Bk34
–
110
5.8
WB1KB132
WB1KB123
WB1KB121
WB1KB134
WB1KB124
WB1KB122
WB1KB136
WB1KB139
2.47 (1.120)
2.47 (1.120)
2.47 (1.120)
2.47 (1.120)
2.47 (1.120)
2.47 (1.120)
2.47 (1.120)
2.47 (1.120)
110
125
–
120 to 127
7.2
–
11.4
25.2
32.5
49.7
77.2
94
220/230
240
–
250
–
–
380
–
400 to 440
Coils with “TH” Treatment p
Add suffix TH to the above catalog numbers; for example, WB1KB140TH.
f
p
“TC” treatment is standard environmental protection equivalent to tropicalization.
“TH” treatment is improved environmental protection equivalent to fungus-proof and insect-proof.
See page 10 for additional information regarding protective treatments.
236
© 2001-2004 Schneider Electric All Rights Reserved
01/04
CR1F/CR1B Contactors and Accessories
Magnetic Latching Contactors – Coils for Contactors CR1B
Accessories for use with coils
Additional resistors c
Automatic coil cut-out contact q
Rectifier f
Coils
(“TC” or “TH”)
R1
Catalog Number
R2
Catalog Number
No.
Catalog Number
Catalog Number
Ω
Ω
For contactors CR1B•31
WB1KB140
WB1KB134
WB1KB136
WB1KB139
WB1KB125
WB1KB126
WB1KB138
68
DR2SC0068
DR2SC0068
DR2SC0220
DR2SC0270
DR2SC0330
DR2SC0470
DR2SC1000
47
DR2SC0047
DR2SC0068
DR2SC0180
DR2SC0220
DR2SC0270
DR2SC0470
DR2SC0470
2
2
2
2
3
3
3
ZC4GM2 or ZC4GM8
ZC4GM2 or ZC4GM8
ZC4GM2 or ZC4GM8
ZC4GM2 or ZC4GM8
ZC4GM2 or ZC4GM8
ZC4GM2 or ZC4GM8
ZC4GM2 or ZC4GM8
DR5TE1U
68
68
–
220
270
330
470
1000
180
220
270
470
470
DR5TE1U
–
DR2SC0220
–
DR5TE1S
DR5TE1S
For contactors CR1B•32
WB1KB133
WB1KB121
WB1KB140
WB1KB124
WB1KB122
WB1KB136
WB1KB125
WB1KB137
10
DR2SC0010
DR2SC0047
DR2SC0100
DR2SC0120
DR2SC0220
DR2SC0330
DR2SC0470
DR2SC0680
33
DR2SC0033
DR2SC0039
DR2SC0047
DR2SC0120
DR2SC0150
DR2SC0220
DR2SC0470
DR2SC0560
1
1
1
1
1
1
1
1
PR4FB0011
PR4FB0010
PR4FB0009
PR4FB0007
PR4FB0007
PR4FB0006
PR4FB0005
PR4FB0004
DR5TE1U
DR5TE1U
–
47
39
100
120
220
330
470
680
47
120
150
220
470
560
DR5TE1U
DR5TE1U
–
ZC4GM2
DR5TE1S
DR5TE1S
For contactors CR1B•33
WB1KB123
WB1KB133
WB1KB121
WB1KB124
WB1KB135
WB1KB139
WB1KB125
39
DR2SC0039
DR2SC0047
DR2SC0056
DR2SC0180
DR2SC0270
DR2SC0470
DR2SC0680
27
DR2SC0027
DR2SC0039
DR2SC0047
DR2SC0120
DR2SC0270
DR2SC0390
DR2SC0470
1
1
1
1
1
1
1
PR4FB0012
PR4FB0011
PR4FB0010
PR4FB0008
PR4FB0006
PR4FB0005
PR4FB0004
DR5TE1U
DR5TE1U
–
47
39
56
47
180
270
470
680
120
270
390
470
DR5TE1U
–
DR5TE1S
DR5TE1S
For contactors CR1B•34
DR5TE1U
WB1KB132
WB1KB123
WB1KB121
WB1KB134
WB1KB124
WB1KB122
WB1KB136
WB1KB139
33
DR2SC0033
DR2SC0047
DR2SC0056
DR2SC0150
DR2SC0180
DR2SC0270
DR2SC0390
DR2SC0560
27
DR2SC0027
DR2SC0033
DR2SC0056
DR2SC0120
DR2SC0150
DR2SC0220
DR2SC0390
DR2SC0470
1
1
1
1
1
1
1
1
PR4FB0014
PR4FB0012
PR4FB0010
PR4FB0008
PR4FB0007
PR4FB0007
PR4FB0006
PR4FB0005
DR5TE1U
DR5TE1U
–
47
33
56
56
150
180
270
390
560
120
150
220
390
470
DR5TE1U
DR5TE1U
–
DR5TE1S
DR5TE1S
c
q
f
Weight of resistors DR2SC••••: 0.030 kg (0.07 lbs).
Weight of automatic coil cut-out contacts: ZC4GM•: 0.030 kg (0.07 lbs) and PR4FB00••: 0.600 kg (1.32 lbs).
Weight of rectifier DR5TE1•: 0.100 kg (0.22 lbs). The rectifier is for use on AC only.
PR4FB0014
237
01/04
© 2001-2004 Schneider Electric All Rights Reserved
CR1F/CR1B Contactors and Accessories
Magnetic Latching Contactors – Accessories and Replacement Parts
For Contactors CR1F
Description
For Contactors
Catalog Number
LA5FF431
Weight lb (kg)
0.59 (0.270)
0.77 (0.350)
1.45 (0.660)
1.45 (0.660)
1.45 (0.660)
1.45 (0.660)
0.79 (0.360)
1.02 (0.465)
1.94 (0.880)
1.02 (0.465)
1.02 (0.465)
1.02 (0.465)
1.08 (0.490)
1.47 (0.670)
2.02 (0.920)
2.86 1.300)
4.07 (1.850)
6.94 (3.150)
1.45 (0.660)
2.00 (0.910)
2.68 (1.220)
3.83 1.740)
5.51 (2.500)
9.25 (4.200)
CR1F150
CR1F185
CR1F265
CR1F400
CR1F500
CR1F630
CR1F1504
CR1F1854
CR1F2654
CR1F4004
CR1F5004
CR1F6304
CR1F150
CR1F185
CR1F265
CR1F400
CR1F500
CR1F630
CR1F1504
CR1F1854
CR1F2654
CR1F4004
CR1F5004
CR1F6304
LA5FG431
LA5FH431
3-pole
LA5F400803
LA5F500803
LA5F630803
LA5FF441
Sets of contacts
for 3 or 4 poles f
LA5FG431
LA5FG441
LA5FH441
4-pole
3-pole
4-pole
LA5F400804
LA5F500804
LA5F630804
LA5F15050
LA5F18550
LA5F26550
LA5F40050
LA5F50050
LA5F63050
LA5F150450
LA5F185450
LA5F265450
LA5F400450
LA5F500450
LA5F630450
Arc chambers
LA5F40050
f
Set containing the following (per pole): 2 fixed contacts, 1 moving contact , 2 deflectors, 1 back-plate, clamping screws and washers.
PA1LB80
(PALB76 + PA1LB75)
For Contactors CR1B
Number of sets required
per pole
Unit catalog Number
of set
Description
For contactors
Weight lb (kg)
CR1BL
CR1BM
CR1BP
CR1BR
1
1
2
3
PA1LB80
PA1LB80
PA1LB80
PA1LB80
0.92 (0.420)
0.92 (0.420)
0.92 (0.420)
0.92 (0.420)
Set of contacts (1 moving contact, 1 fixed contact)
ZC4GM1 PA1LB89
Description
For contactors
All ratings
All ratings
All ratings
CR1BL
Composition
Catalog Number
PA1LB75
PA1LB76
PA1LB89
PA1LB50
PA1LB50
PA1PB50
PA1RB50
ZC4GM1
Weight lb (kg)
0.48 (0.220)
0.44 (0.200)
0.26 (0.120)
8.15 (3.700)
8.15 (3.700)
13.6 (6.200)
18.7 (8.500)
0.06 (0.030)
0.06 (0.030)
0.06 (0.030)
0.06 (0.030)
1.32 (0.600)
0.07 (0.035)
0.48 (0.220)
23.3 (10.600)
Moving contact only (for one finger)
Fixed contact only (for one finger)
Blow-out horn only (for one finger)
–
–
–
–
CR1BM
–
Arc chambers (for a single pole)
Auxiliary contact blocks
CR1BP
–
CR1BR
–
All ratings
All ratings
All ratings
All ratings
All ratings
All ratings
All ratings
All ratings
1 N.O. contact normal
1 N.C. contact normal
ZC4GM2
PA1LB50
1 N.O. contact gold flashed
ZC4GM9
1 N.C. contact gold flashed
ZC4GM8
N.C. pole for automatic cut-out coil
Set of moving and fixed contacts for N.C. pole
Arc chamber for N.C. pole
–
–
–
–
PR4FB00•• c
PV1FA80
PN1FB50
ET1KB50
Electromagnet
Description
For contactors
CR1B (1 pole)
CR1B (2, 3 or 4 poles)
CR1BL, BM or BP
CR1BR
No. of parts required
Catalog number
DV1RT292
Weight lb (kg)
0.11 (0.050)
0.11 (0.050)
0.04 (0.020)
0.04 (0.020)
1
Return springs for moving part of electromagnet
2
DV1RT292
1 per pole
1 per pole
DV1RC201
DV1RC155
N.O. pole springs
c
Select complete catalog number from page 259.
PR4FB00••
238
© 2001-2004 Schneider Electric All Rights Reserved
01/04
CR1F/CR1B Contactors and Accessories
Magnetic Latching Contactors Type CR1F – Dimensions
Magnetic Latching Contactors type CR1F - Dimensions
Dimensions shown in millimeters (mm x .0394 = inches)
CR1F150 to CR1F500
Common side view
CR1F150, CR1F185, CR1F265
CR1F400, CR1F500
S
44.5
S
S1
8x¯8.5
F150 M8x25
F185 M8x25
F265 M10x35
6xM10x35
■
3xØ6.5
(5/16 inch
mounting
screws)
(1/4 inch
mounting
screws)
G
=
G1
G
=
23.5
G1
J
Z
Y
Q
P
P
Q1
a
f
L
Q
P
P
Q1
c
Power terminal
c
a
f
protection shroud.
CR1F150
3 Pole
163.5
170
137
301
171
131
106
80
CR1F185
3 Pole
168.5
174
CR1F265
3 Pole
201.5
203
145
370
213
147
142
96
CR1F400
3 Pole
213
CR1F500
4 Pole
201.5
170
137
301
171
131
143
80
4 Pole
208.5
174
137
305
181
130
151
80
4 Pole
244.5
203
145
370
213
147
190
96
4 Pole
261
66
3 Pole
233
66
4 Pole
288
66
a
a
b
G min
66
b1
b2
c
137
b
b2
c
206
206
375
219
146
80
238
400
232
150
80
238
400
232
150
140
175
230
156
265
27
305
375
181
219
f
130
f
146
G
G1
J
111
G supplied
G max
80
80
102
150
170
156
240
60
120
170
156
210
32
106
120
107
150
40
106
120
107
150
40
106
106
120
113.5
154
40
106
120
141
178
48
106
120
141
178
48
G1 supplied 170
J1
L
120
G1 min
156
192
12
113.5
154
G1 max
M
P
J1
L
40
145
181
48
145
181
48
146
208
55
146
208
55
Q
Q1
S
26
26
29
29
39
34
M
P
57.5
20
55.5
20
59.5
20
59.5
20
66.5
25
66.5
25
Q
43
43
47
47
S1
Y
27
27
34
34
38
38
Q1
S
74
74
77
77
44
44
38.5
13.5
30.5
13.5
30.5
15.5
21.5
15.5
25
25
30
30
Z
13.5
13.5
f = minimum distance required for coil removal
f = minimum distance required for coil removal
X1: Minimum electrical clearance according to operational voltage and
breaking capacity
X1: Minimum electrical clearance according to operational voltage and breaking capacity
Voltage in V
CR1F150
CR1F185
CR1F265
CR1F630
200 to 500
660 to 1000
Voltage in V
CR1F400
CR1F500
200 to 500
660 to 1000
10
10
10
15
15
15
15
15
20
20
CR1F630
3 P
309
180
100
195
61
4 P
389
240
150
275
81
72
40
64
a
4xØ10.5
(3/8 inch
mounting
screws)
■
6xM12x45
G supplied
G min
G max
J1
Q
60
60
Q1
89
89
X1: Minimum electrical clearance according to
operational voltage and breaking capacity
Voltage in V
200 to 500
X1
20
30
690 to 1000
60.5
G
J1
c
q
Power terminal protection
shroud.
Minimum distance
required for coil removal.
155
197
255
Q
80
80
a
Q1
181 ■
239
01/04
© 2001-2004 Schneider Electric All Rights Reserved
CR1F/CR1B Contactors and Accessories
Magnetic Latching Contactors Type CR1F – Mounting
Magnetic Latching Contactors type CR1F - Mounting
Dimensions shown in millimeters (mm x.0394 = inches)
CR1F150 to F265
On panel
On pre-slotted mounting plate AM1PA, AM1PB, AM1PC
On rails DZ5MB at 120 mm mounting center
■
3x 6.5
G
DZ5MF5
AF1EA6
G
=
=
J1
J
G
c
c
c
15
c
Power terminal protection shroud.
CR1F150 CR1F185 CR1F265
CR1F150 CR1F185 CR1F265
CR1F150 CR1F185 CR1F265
3P
4P
3P
4P
3P
4P
3P
4P
171
171
80
181
181
80
213
213
96
3P
4P
3P
4P
171
171
80
181
181
80
213
213
96
3P
4P
3P
4P
171
171
80
181
181
80
213
213
96
c
c
c
G
J
G
G
80
80
96
80
80
96
80
80
96
26.5
45
29
44.5
68.5
61.5
85.5
49
57
59.5
79.5
J1
75.5
CR1F150 to F650
On 2 notched uprights AM1EC•••
AM1EC200
AF1CD081 + AF1VC820
■
AF1CD101+
AF1VC10
■
AF1CD081+
AF1VC820
AF1CD061+
AF1VA618
AF1CD061
AF1VA618
M6
AF1VA618
M6
LA9F100
Ø8.5
M6
Ø10.5
=
=
G
G
G1
G2
c
25
AM1EC200
AM1EC200
G3
q
f
AF1CD••• or AF1VA•••.
This upright AM1EC200 is required when G2 or G3 is greater than 700 mm.
CR1F150
CR1F185
CR1F265
CR1F400
CR1F500
CR1F630
3P
4P
3P
4P
3P
4P
3P
4P
171
171
80
80
–
181
181
80
80
–
213
213
96
96
–
213
213
–
226
226
–
250
250
–
c
G (M6)
G1 (Ø 8.5)
G2 (Ø 10.5)
–
–
–
80
80
–
80
140
–
–
–
–
–
–
–
–
–
180
240
–
–
–
–
–
240
© 2001-2004 Schneider Electric All Rights Reserved
01/04
CR1F/CR1B Contactors and Accessories
Magnetic Latching Contactors Type CR1F – Mounting
Dimensions shown in millimeters (mm x .0394 = inches)
Reversing contactors
2 x CR1F150 to CR1F265
Horizontally mounted
Reversing contactors
2 x CR1F400 to CR1F630
P1
8xØ8.5 ■
8xØ8.5 ■
P1
3x¯6.5
3x¯6.5
J1
J3
G
J
J2
a
G
J1
J3
=
=
=
=
G1
G1
J1
G1
J
G1
J1
a
c
q
Except F630: 4 x Ø 10.5.
Except F630.
2 x CR1-
F150
a
b
G
J
J1
P1
71
2 x CR1-
a
b
G
G1
170
170
170
230
–
J
J1
J2
J3
P1
3P
4P
3P
4P
3P
4P
345
422
357
437
425
521
170
170
174
174
203
203
80
80
80
80
96
96
71
57
3P
446
542
485
595
636
796
206
206
238
238
304
304
80
157
157
156
156
139
139
64.5
67
19.5
67.5
39.5
34.5
–
107
107
112
112
137
137
F400
F500
F630
111
78
75.5
59.5
79.5
61.5
85.5
71
4P
3P
4P
3P
4P
80
112.5 67
78
80
84.5
79.5
68.5
88.5
66
66
–
F185
F265
118
109
157
78
140
180
240
100
100
–
–
–
241
01/04
© 2001-2004 Schneider Electric All Rights Reserved
CR1F/CR1B Contactors and Accessories
Magnetic Latching Contactors Type CR1F – Mounting
Dimensions shown in millimeters (mm x .0394 = inches)
Changeover contactor pairs
Vertically mounted with mechanical interlock LA9F•••
2 contactors CR1F of identical or different ratings (CR1F150 to CR1F630), see page 240.
Assembly A
Assembly B
Assembly C
J3
80
12.5
G5
G1
12.5
G5
G1
■
■
■
■
■
■
■
■
=
=
= =
■
9
G3
J1
G3■
J1
G3■
J1
■
■
■
■
■
■
■
■
=
=
=
=
= =
■
9
12.5
J4
80
J4
80
G4 G2
J2
J2
J2
c
Mechanical interlock shaft.
q
f
p
k
w
For assembly of contactors with different ratings only.
3 x Ø 6.5 mm for CR1F150 to F265.
3 x Ø 6.5 mm for CR1F265.
Mechanical interlock guide bracket.
4 x Ø 8.5 mm for CR1F400, F500 or 4 x Ø 10.5 mm.
Assembly
Type
A
B
C
LA9-
FF4F FG4F FG4G
FH4F FJ4F FK4F FL4F FH4G FJ4G FK4G FL4G
FH4H FJ4H FK4H FL4H FJ4J FK4J FL4J FK4K FL4K FL4L
3P
–
–
–
96
96
–
80
80
–
80
140
–
180
240
–
96
96
–
80
80
–
80
140
–
180
240
–
96
96
96
96
0
80
80
80
180
240
96
80
80
80
80
0
80
140
80
80
0
180
240
80
80
140
80
140
0
180
240
80
180
240
180
240
0
G1
4P
–
–
–
140
96
3P
–
–
–
96
G2
4P
–
–
–
–
–
–
–
–
–
–
–
96
96
96
80
140
9 t
9 t
83
3P
0
3
0
21
27
–
45
26
–
45
26
–
35
19
23
–
42
22
–
42
22
–
33
13
–
23
23
14
9 t
9 t
83
G3
4P
0
4
0
17
0
0
0
9 t
60
0
0
0
0
3P
–
–
–
–
60
83
60
83
250
380
130
260
60
60
83
83
83
83
260
380
60
200
137
185
83
83
83
83
280
380
100
200
157
212
137
185
–
83
83
83
83
300
380
120
200
157
212
157
212
–
74
G4
4P
–
–
–
–
–
–
–
–
–
–
–
83
83
83
83
83
74
3P
–
–
–
60
83
240
380
110
250
83
83
250
380
80
210
83
83
270
380
100
210
157
212
183
145
–
74
60
83
250
380
120
250
83
83
250
380
90
220
83
83
270
380
110
220
157
212
134
146
–
74
74
310
380
150
220
241
321
134
146
–
83
83
74
74
74
74
G5
4P
–
–
–
74
83
83
74
74
74
74
min
200
310
80
190
133
145
133
145
210
300
90
180
134
146
133
145
220
310
100
190
134
146
134
146
53
73
53
73
310
380
140
210
241
321
133
145
–
260
380
110
230
280
380
130
230
157
212
330
380
170
220
24
325
380
140
195
241
321
137
185
–
345
380
160
195
244
321
157
212
–
380
380
200
200
241
321
241
312
–
H
max
min
H1
max
3P
149.5 137
164.5 185
149.5 137
164.5 185
149.5 137
164.5 185
J1
4P
321
3P
183
145
–
133
145
–
134
146
–
134
146
–
142.5 149.5 149.5 149.5 137
164.5 164.5 164.5 164.5 185
J2
4P
3P
48.5 53
67 73
48.5 54
67 69
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
J3
4P
–
–
–
–
–
–
–
–
–
–
–
–
–
3P
48.5 48.5 48.5 48.5 53
67 67 67 67 73
53
73
53
73
53
73
–
–
–
–
–
J4
4P
–
–
–
–
–
t
In this case G4 is larger than G5.
242
© 2001-2004 Schneider Electric All Rights Reserved
01/04
CR1F/CR1B Contactors and Accessories
Magnetic Latching Contactors Type CR1F – Mounting
Dimensions shown in millimeters (mm x .0394 = inches)
Common side view
Single-pole, 2-pole, or 3-pole contactors
4-pole contactors
185
R
290
15
15
15
44
P
P
Q1
Q1
P
M1
51
P
30
15
M
L
30
30
M2
30
L
S
T
¯
CR1BL
1
CR1BM
1
CR1BP
1
CR1BR
1
Number of poles
2
3
4
2
3
4
2
3
4
2
3
4
a
50
50
59
16
445
385
–
50
59
16
540
480
–
50
63
63
55
20
63
63
100
55
100
55
100
55
100
55
125
50
125
125
50
125
50
b
59
59
55
55
55
50
c
16
16
20
20
20
20
20
20
20
25
25
25
25
L
345
285
–
760
–
345
285
–
445
385
–
540
480
–
760
–
385
325
–
540
480
–
760
700
–
1065
–
445
385
–
635
575
–
885
825
–
1065
–
M
M1
M2
N
308
392
121
100
100
122
10
308
392
125
100
100
157
17
455
550
125
150
110
173
20
455
550
130
195
123
173
20
–
–
–
–
–
–
–
–
–
–
–
–
121
100
100
122
10
121
100
100
122
10
30
9
121
100
100
122
10
30
9
125
100
100
157
17
125
100
100
157
17
125
100
100
157
17
125
150
110
173
20
125
150
110
173
20
125
150
110
173
20
130
195
123
173
20
130
195
123
173
20
130
195
123
173
20
P
Q1
R
S
T
30
30
30
30
30
30
60
60
60
60
60
60
60
60
Ø
9
9
11
11
11
11
11
11
11
11
11
11
11
11
Electrical safety clearance
Values X1 and X2 are given for a breaking capacity of 10 In (3-phase AC current).
3-phase AC voltage
CR1BL
100
CR1BM
100
CR1BP
CR1BR
200
X1
150
200
150
220
200
250
200
250
380-415-440 V
500 V
X2
X1
X2
X1
X2
X1
X2
150
150
250
100
100
200
150
150
250
150
150
200
600 V
200
200
250
200
200
250
1000 V
X1
250
250
300
Mechanical interlock
for assembly of vertically mounted reversing contactors
EZ2LB0601
243
01/04
© 2001-2004 Schneider Electric All Rights Reserved
CR1F/CR1B Contactors and Accessories
Magnetic Latching Contactors Type CR1B – Adjustment Characteristics
Magnetic Latching Contactors Type CR1B - Adjustment Characteristics
Complete pole
Adjustment of pick-up travel and pull-in travel
E
Moving
circuit
e
Coil
Moving
circuit
Return
spring
N.O. pole adjustment
N.C. automatic coil cut-out pole adjustment
1 Fixed contact
Fixed
contact
b
Moving contactct
F
F
2 Moving contact
Pull-in gap
adjustment
Opening gap
adjustment
3
4
5
Adjustment of
application force
Pole
spring
Adjustment of
application force
Pole spring
AC or DC supply with economy resistor (and rectifier on AC supply)
Contactor Type
CR1BL
30
CR1BM
30
CR1BP
30
CR1BR
Pick-up travel (E)
Pull-in travel (e)
Pull-in voltage
mm f
mm f
V
30
Electromagnet
(EB5KB50)
10
10
10
10
0.75 Vc
0.3 to 0.5
0.75 Vc
0.3 to 0.5
0.75 Vc
0.3 to 0.5
–
Coil
WB1KB
Drop-out voltage
V
0.3 to 0.5
Application force (F)
to contact per pole
N.O. power pole (PA1)
daN / lb 30/67
daN / lb 0.9/2
30/67
30/67 c
0.9/2
30/67 q
0.9/2
Application force (F)
0.9/2
N.C. automatic coil cut-out
pole (PR4)
Opening gap (b) with
electromagnet closed
mm f
3.5 ± 0.5
3.5 ± 0.5
3.5 ± 0.5
3.5 ± 0.5
f
millimeters x 0.394 = inches.
c
q
Each pole has 2 contacts: the force must be applied evenly to each of these contacts.
Each pole has 3 contacts: the force must be applied evenly to each of these contacts.
244
© 2001-2004 Schneider Electric All Rights Reserved
01/04
CR1F/CR1B Contactors and Accessories
Magnetic Latching Contactors Type CR1F – Schematics
Magnetic Latching Contactors Type CR1F - Schematics
nnn
Contactors Type CR1F
3-pole CR1F••33
4-pole CR1F••34
Front mounting add-on contact blocks - Instantaneous auxiliary contacts (References: pages 16 and 17)
1 N.O. LA1DN10
1 N.C. LA1DN01
1 N.O. + 1 N.C. LA1DN11
2 N.O. LA1DN20
2 N.C. LA1DN02
2 N.O. + 2 N.C. LA1DN22
Items in
Items in
brackets refer
brackets refer
to block
to block
mounted on
right-hand side
of contactor.
mounted on
right-hand side
of contactor.
1 N.O. + 3 N.C. LA1DN13
4 N.O. LA1DN40
4 N.C. LA1DN04
2 N.O. + 2 N.C. of which 1 N.O. + 1 N.C. make-before-break
LA1DC22
3 N.O. + 1 N.C. LA1DN31
Front mounting add-on contact blocks - Instantaneous auxiliary contacts conforming to standard EN 50012 (References: pages 218 to 219)
1 N.O. + 1 N.C. LA1DN11P 1 N.O. + 1 N.C. LA1DN11G 1 N.O. + 1 N.C. LA1DN11M 2 N.O. + 2 N.C. LA1DN22P 2 N.O. + 2 N.C. LA1DN22G
2 N.O. + 2 N.C. LA1DN22M
Front mounting add-on contact blocks - Dust and damp protected instantaneous auxiliary contacts (References: pages 218 to 219)
2 N.O. (24-50 V) LA1DX20 2 N.O. (5-24 V) LA1DY20 2 N.O. protected (24-50 V) 2 N.O. standard LA1DZ40
2 N.O. protected (24-50 V) + 1 N.O. + 1 N.C. standard LA1DZ31
Front mounting add-on contact blocks - Time delay auxiliary contacts (References: pages 218 to 219)
OnDelay 1 N.O. + 1 N.C. LA2DT•
OffDelay 1 N.O. + 1 N.C. LA3DR•
N.C. onDelay + LA2DS• break-before-make N.O. contact
3-pole reversing contactors 2 x CR1F150 to CR1F630
4-pole reversing contactors 2 x CR1F1504 to CR1F6304
Horizontally mounted
Vertically mounted contactors using 2 contactors of identical or different rating
N
L3
L2
L1
L3
L2
L1
245
01/04
© 2001-2004 Schneider Electric All Rights Reserved
CR1F/CR1B Contactors and Accessories
Magnetic Latching Contactors Type CR1F – Schematics
Contactors Type CR1B
CR1B•31•12
CR1B•32•12
CR1B•33•12
CR1B•34•12
CR1B•31•21
CR1B•32•21
CR1B•33•21
CR1B•34•21
CR1B•31•30
CR1B•32•30
CR1B•33•30
CR1B•34•30
Wiring schematics
Contactors CR1F and CR1B with thermal overload relay
Contactors CR1F
Ð KM1:5
Contactors CR1B
DC
AC
AC
Ð KM1
Ð F1
DC
KM1
■
Ð S2
Ð F1
S2
F1
Ð KM1
Ð S1
KM1
M
3 AC
Ð KM1
Ð KM1:1
2
q: automatic coil cut-out contact ZC4GM or PR4FB00••
S1: latching pushbutton
S2: unlatching pushbutton
Coils for contactors CR1F
Pushbutton control
Schematic of internal circuit
CR1
Ø A1
Ø A2
Ø E1
DC(−)/AC
DC(+)/AC
Switch control
CR1
CR1
DC(−)/AC
DC(+)/AC
Warning: terminal A2 is common to both windings in all cases.
246
© 2001-2004 Schneider Electric All Rights Reserved
01/04
Catalog Number Index
A
DZ3HA3 . . . . . . . . . . . . . . . . . . . . . . . 196
DZ3JA3 . . . . . . . . . . . . . . . . . . . . . . . 196
DZF2FX1 . . . . . . . . . . . . . . . . . . . . . . 198
E
ET1KB50 . . . . . . . . . . . . . . . . . . . . . . 238
EZ2LB0601 . . . . . . . . . . . . . . . . . . . . 231
G
LA4DE3U . . . . . . . . . . . . . . . . . . . . . . 112
LAD4RCE . . . . . . . . . . . . . . . . . . . . . . 112
LAD4RCU . . . . . . . . . . . . . . . . . . . . . . 112
LAD4TB. . . . . . . . . . . . . . . . . . . . . . . . 112
LAD4TS. . . . . . . . . . . . . . . . . . . . . . . . 112
LAD4VE . . . . . . . . . . . . . . . . . . . . . . . 112
LAD4VG . . . . . . . . . . . . . . . . . . . . . . . 112
LAD4VU . . . . . . . . . . . . . . . . . . . . . . . 112
LA4DFBQ . . . . . . . . . . . . . . . . . . . . . . 111
LA4DFB. . . . . . . . . . . . . . . . . . . . . . . . 111
LA4DFE. . . . . . . . . . . . . . . . . . . . . . . . 111
LA4DLB. . . . . . . . . . . . . . . . . . . . . . . . 111
LA4DLE. . . . . . . . . . . . . . . . . . . . . . . . 111
LA4DMK . . . . . . . . . . . . . . . . . . . . . . . 111
LA4DMU . . . . . . . . . . . . . . . . . . . . . . . 111
LA4DT0U . . . . . . . . . . . . . . . . . . . . . . 111
LA4DT2U . . . . . . . . . . . . . . . . . . . . . . 111
LA4DT4U . . . . . . . . . . . . . . . . . . . . . . 111
LA4DWB . . . . . . . . . . . . . . . . . . . . . . . 111
LA4FRCE . . . . . . . . . . . . . . . . . . . . . . 196
LA4FRCF . . . . . . . . . . . . . . . . . . . . . . 196
LA4FRCP . . . . . . . . . . . . . . . . . . . . . . 196
LA4FRCV . . . . . . . . . . . . . . . . . . . . . . 196
LA4FRVE . . . . . . . . . . . . . . . . . . . . . . 196
LA4FRVF. . . . . . . . . . . . . . . . . . . . . . . 196
LA4FRVP . . . . . . . . . . . . . . . . . . . . . . 196
LA4FRVV . . . . . . . . . . . . . . . . . . . . . . 196
LA4FTE. . . . . . . . . . . . . . . . . . . . . . . . 196
LA4FTF . . . . . . . . . . . . . . . . . . . . . . . . 196
LA4FTP. . . . . . . . . . . . . . . . . . . . . . . . 196
LA4FTV. . . . . . . . . . . . . . . . . . . . . . . . 196
LA4FDE. . . . . . . . . . . . . . . . . . . . . . . . 196
LA4FDF. . . . . . . . . . . . . . . . . . . . . . . . 196
LA4FDP. . . . . . . . . . . . . . . . . . . . . . . . 196
LA4FDV. . . . . . . . . . . . . . . . . . . . . . . . 196
LA4KA1U . . . . . . . . . . . . . . . . . . . . . . . 56
LA4KC1B . . . . . . . . . . . . . . . . . . . . . . . 56
LA4KC1E . . . . . . . . . . . . . . . . . . . . . . . 56
LA4KE1B . . . . . . . . . . . . . . . . . . . . . . . 56
LA4KE1E . . . . . . . . . . . . . . . . . . . . . . . 56
LA4KE1FC . . . . . . . . . . . . . . . . . . . . . . 56
LA4KE1UG . . . . . . . . . . . . . . . . . . . . . . 56
LA4SPX. . . . . . . . . . . . . . . . . . . . . . . . 108
LA5D1158031 . . . . . . . . . . . . . . . . . . . 114
LA5D150803 . . . . . . . . . . . . . . . . . . . . 114
LA5D115804 . . . . . . . . . . . . . . . . . . . . 114
LA5D11550 . . . . . . . . . . . . . . . . . . . . . 114
LA5D15050B. . . . . . . . . . . . . . . . . . . . 114
LA5D115450B. . . . . . . . . . . . . . . . . . . 114
LA5F115450 . . . . . . . . . . . . . . . . . . . . 199
LA5F11550 . . . . . . . . . . . . . . . . . . . . . 199
LA5F150450 . . . . . . . . . . . . . . . . 199, 238
LA5F15050 . . . . . . . . . . . . . . . . . 199, 238
LA5F185450 . . . . . . . . . . . . . . . . 199, 238
LA5F18550 . . . . . . . . . . . . . . . . . 199, 238
LA5F225450 . . . . . . . . . . . . . . . . . . . . 199
LA5F22550 . . . . . . . . . . . . . . . . . . . . . 199
LA5F265450 . . . . . . . . . . . . . . . . 199, 238
LA5F26550 . . . . . . . . . . . . . . . . . 199, 238
LA5F330450 . . . . . . . . . . . . . . . . . . . . 199
LA5F33050 . . . . . . . . . . . . . . . . . . . . . 199
LA5F400250 . . . . . . . . . . . . . . . . . . . . 199
LA5F400450 . . . . . . . . . . . . . . . . 199, 238
LA5F40050 . . . . . . . . . . . . . . . . . 199, 238
LA5F400802 . . . . . . . . . . . . . . . . . . . . 199
LA5F400803 . . . . . . . . . . . . . . . . 199, 238
LA5F400804 . . . . . . . . . . . . . . . . 199, 238
LA5F500250 . . . . . . . . . . . . . . . . . . . . 199
LA5F500450 . . . . . . . . . . . . . . . . 199, 238
LA5F50050 . . . . . . . . . . . . . . . . . 199, 238
LA5F500802 . . . . . . . . . . . . . . . . . . . . 199
LA5F500803 . . . . . . . . . . . . . . . . 199, 238
LA5F500804 . . . . . . . . . . . . . . . . 199, 238
LA5F630250 . . . . . . . . . . . . . . . . . . . . 199
LA5F630450 . . . . . . . . . . . . . . . . 199, 238
LA5F63050 . . . . . . . . . . . . . . . . . 199, 238
LA5F630802 . . . . . . . . . . . . . . . . . . . . 199
LA5F630803 . . . . . . . . . . . . . . . . 199, 238
LA5F630804 . . . . . . . . . . . . . . . . 199, 238
LA5F780150 . . . . . . . . . . . . . . . . . . . . 199
LA5F780801 . . . . . . . . . . . . . . . . . . . . 199
LA5F780803 . . . . . . . . . . . . . . . . . . . . 199
LA5F780804 . . . . . . . . . . . . . . . . . . . . 199
LA5F80050 . . . . . . . . . . . . . . . . . . . . . 199
LA5F800803 . . . . . . . . . . . . . . . . . . . . 199
LA5FF431 . . . . . . . . . . . . . . . . . 199, 238
LA5FF441 . . . . . . . . . . . . . . . . . 199, 238
LA5FG431 . . . . . . . . . . . . . . . . . 199, 238
LA5FG441 . . . . . . . . . . . . . . . . . 199, 238
LA5FH431 . . . . . . . . . . . . . . . . . 199, 238
LA5FH441 . . . . . . . . . . . . . . . . . 199, 238
LA6DK10 . . . . . . . . . . . . . . . . . . . . . . .108
LA6DK20 . . . . . . . . . . . . . . . . . . . . . . .108
LA7D03 . . . . . . . . . . . . . . . . . . . .137, 221
LA7D1020 . . . . . . . . . . . . . . . . . .137, 221
LA7D1064 . . . . . . . . . . . . . . . . . . . . . . 137
LA7D2064 . . . . . . . . . . . . . . . . . . . . . . 137
LA7D305 . . . . . . . . . . . . . . . . . . .137, 221
LA7D3064 . . . . . . . . . . . . . . . . . . . . . .137
LA7D3058 . . . . . . . . . . . . . . . . . . . . . .137
LA7D901 . . . . . . . . . . . . . . . . . . .137, 221
LA7D902 . . . . . . . . . . . . . . . . . . . . . . .137
LA7D903 . . . . . . . . . . . . . . . . . . .137, 221
LA7F401 . . . . . . . . . . . . . . . . . . .197, 221
LA7F402 . . . . . . . . . . . . . . . . . . .197, 221
LA7F403 . . . . . . . . . . . . . . . . . . .197, 221
LA7F404 . . . . . . . . . . . . . . . . . . .197, 221
LA7F405 . . . . . . . . . . . . . . . . . . .197, 221
LA7F406 . . . . . . . . . . . . . . . . . . .197, 221
LA7F407 . . . . . . . . . . . . . . . . . . . . . . .221
LA7F701 . . . . . . . . . . . . . . . . . . . . . . .221
LA7F702 . . . . . . . . . . . . . . . . . . . . . . .221
LA7F703 . . . . . . . . . . . . . . . . . . . . . . .221
LA7F901 . . . . . . . . . . . . . . . . . . . . . . .221
LA7F902 . . . . . . . . . . . . . . . . . . . . . . .221
LA7K0064 . . . . . . . . . . . . . . . . . . . . . . .63
LA9AADIS3 . . . . . . . . . . . . . . . . . . . . .155
LA9AADIS4 . . . . . . . . . . . . . . . . . . . . .155
LA9AADIS5 . . . . . . . . . . . . . . . . . . . . .155
LA9AADIS7 . . . . . . . . . . . . . . . . . . . . .155
LA9B103 . . . . . . . . . . . . . . . . . . . . . . .231
LA9CA06DT. . . . . . . . . . . . . . . . . . . . .155
LA9CA06ET. . . . . . . . . . . . . . . . . . . . .155
LA9CA06FT. . . . . . . . . . . . . . . . . . . . .155
LA9CA06GT . . . . . . . . . . . . . . . . . . . .155
LA9CA06HT. . . . . . . . . . . . . . . . . . . . .155
LA9CA06IO . . . . . . . . . . . . . . . . . . . . .155
LA9CA06JT . . . . . . . . . . . . . . . . . . . . .155
LA9CA06LT . . . . . . . . . . . . . . . . . . . . .155
LA9CA06NT. . . . . . . . . . . . . . . . . . . . .155
LA9CA06ST. . . . . . . . . . . . . . . . . . . . .155
LA9CA06UT. . . . . . . . . . . . . . . . . . . . .155
LA9CA06VT. . . . . . . . . . . . . . . . . . . . .155
LA9CA06WT . . . . . . . . . . . . . . . . . . . .155
LA9CA16ST. . . . . . . . . . . . . . . . . . . . .155
LA9CA16UT. . . . . . . . . . . . . . . . . . . . .155
LA9CA16VT. . . . . . . . . . . . . . . . . . . . .155
LA9CA16WT . . . . . . . . . . . . . . . . . . . .155
LA9D09907 . . . . . . . . . . . . . . . . . . . . .160
LA9D09966 . . . . . . . . . . . . . . . . . . . . . 113
LA9D09980 . . . . . . . . . . . . . . . . . . . . .196
LA9D09981 . . . . . . . . . . . . . . . . . . . . .196
LA9D91 . . . . . . . . . . . . . . . . . . . . . . . .137
LA9D11502 . . . . . . . . . . . . . . . . . . . . . .98
LA9D115503B . . . . . . . . . . . . . . . . . . . 113
LA9D115504 . . . . . . . . . . . . . . . . . . . . 113
LA9D115603B . . . . . . . . . . . . . . . . . . . 113
LA9D115604 . . . . . . . . . . . . . . . . . . . . 113
LA9D115703 . . . . . . . . . . . . . . . . . . . . 113
LA9D11569 . . . . . . . . . . . . . . . . . . . . . .98
LA9D115704 . . . . . . . . . . . . . . . . . . . .113
LA9D1260 . . . . . . . . . . . . . . . . . . . . . . 113
LA9D1261 . . . . . . . . . . . . . . . . . . . . . . 113
LA9D1263 . . . . . . . . . . . . . . . . . . . . . . 113
LA9D12974 . . . . . . . . . . . . . . . . . . . . .149
LA9D2561 . . . . . . . . . . . . . . . . . . . . . .113
LA9D11569 . . . . . . . . . . . . . . . . . . . . . .98
LA9D3260 . . . . . . . . . . . . . . . . . . . . . .113
LA9D32974 . . . . . . . . . . . . . . . . . . . . .149
LA9D4002 . . . . . . . . . . . . . . . . . . . . . . .98
LA9D40961 . . . . . . . . . . . . . . . . . . . . . 113
LA9D40963 . . . . . . . . . . . . . . . . . . . . . 113
LA9D4017 . . . . . . . . . . . . . . . . . . . . . .149
LA9D40961 . . . . . . . . . . . . . . . . . . . . . 113
LA9D40963 . . . . . . . . . . . . . . . . . . . . . 113
LA9D40973 . . . . . . . . . . . . . . . . . . . . .149
LA9D5017 . . . . . . . . . . . . . . . . . . . . . .149
LA9D50978 . . . . . . . . . . . . . . . . . . . . . .98
LA9D511 . . . . . . . . . . . . . . . . . . . . . . .114
LA9D6567 . . . . . . . . . . . . . . . . . . . . . . 113
LA9D6569 . . . . . . . . . . . . . . . . . . . . . . .98
LA9D730 . . . . . . . . . . . . . . . . . . . . . . .114
LA9D8002 . . . . . . . . . . . . . . . . . . . . . . .98
LA9D8017 . . . . . . . . . . . . . . . . . . . . . .149
LA9D8067 . . . . . . . . . . . . . . . . . . . . . .113
LA9D8069 . . . . . . . . . . . . . . . . . . . . . . .98
LA9D80961 . . . . . . . . . . . . . . . . . . . . . 113
LA9D80962 . . . . . . . . . . . . . . . . . . . . . 113
LA9D80963 . . . . . . . . . . . . . . . . . . . . . 113
LA9D80973 . . . . . . . . . . . . . . . . . . . . .149
LA9D80978 . . . . . . . . . . . . . . . . . . . . . .98
LA9D90 . . . . . . . . . . . . . . . . . . . . . .56, 72
AB1G . . . . . . . . . . . . . . . . . . . . . . . 56, 72
AB1R . . . . . . . . . . . . . . . . . . . . . . . 56, 72
AM1DP200 . . . . . . . . . . . . . . . . . . 56, 72
AM1ED200 . . . . . . . . . . . . . . . . . . 56, 72
C
CR1BL31 . . . . . . . . . . . . . . . . . . . . . . 230
CR1BL32 . . . . . . . . . . . . . . . . . . . . . . 230
CR1BL33 . . . . . . . . . . . . . . . . . . . . . . 230
CR1BL34 . . . . . . . . . . . . . . . . . . . . . . 230
CR1BM31 . . . . . . . . . . . . . . . . . . . . . 230
CR1BM32 . . . . . . . . . . . . . . . . . . . . . 230
CR1BM33 . . . . . . . . . . . . . . . . . . . . . 230
CR1BM34 . . . . . . . . . . . . . . . . . . . . . 230
CR1BP31 . . . . . . . . . . . . . . . . . . . . . 230
CR1BP32 . . . . . . . . . . . . . . . . . . . . . 230
CR1BP33 . . . . . . . . . . . . . . . . . . . . . 230
CR1BP34 . . . . . . . . . . . . . . . . . . . . . 230
CR1BR31 . . . . . . . . . . . . . . . . . . . . . 230
CR1BR32 . . . . . . . . . . . . . . . . . . . . . 230
CR1BR33 . . . . . . . . . . . . . . . . . . . . . 230
CR1BR34 . . . . . . . . . . . . . . . . . . . . . 230
CR1F150 . . . . . . . . . . . . . . . . . . . . . . 230
CR1F1504 . . . . . . . . . . . . . . . . . . . . . 230
CR1F185 . . . . . . . . . . . . . . . . . . 230, 233
CR1F1854 . . . . . . . . . . . . . . . . . 230, 233
CR1F265 . . . . . . . . . . . . . . . . . . 230, 233
CR1F2654 . . . . . . . . . . . . . . . . . 230, 233
CR1F400 . . . . . . . . . . . . . . . . . . 230, 233
CR1F4004 . . . . . . . . . . . . . . . . . 230, 233
CR1F500 . . . . . . . . . . . . . . . . . . 230, 233
CR1F5004 . . . . . . . . . . . . . . . . . 230, 233
CR1F630 . . . . . . . . . . . . . . . . . . 230, 233
CR1F6304 . . . . . . . . . . . . . . . . . 230, 233
D
DE1DS1 . . . . . . . . . . . . . . . . . . . . . . . 166
DE1DS1A04. . . . . . . . . . . . . . . . . . . . 166
DE1DS1A05. . . . . . . . . . . . . . . . . . . . 166
DE1DS1A13. . . . . . . . . . . . . . . . . . . . 166
DE1DS2 . . . . . . . . . . . . . . . . . . . . . . . 166
DE1DS2A04. . . . . . . . . . . . . . . . . . . . 166
DE1DS2A05. . . . . . . . . . . . . . . . . . . . 166
DE1DS2A13. . . . . . . . . . . . . . . . . . . . 166
DR2SC0010 . . . . . . . . . . . . . . . . . . . 237
DR2SC0027 . . . . . . . . . . . . . . . . . . . 237
DR2SC0033 . . . . . . . . . . . . . . . . . . . 237
DR2SC0039 . . . . . . . . . . . . . . . 209, 237
DR2SC0047 . . . . . . . . . . . . . . . 209, 237
DR2SC0056 . . . . . . . . . . . . . . . . . . . 237
DR2SC0068 . . . . . . . . . . . . . . . . . . . 237
DR2SC0100 . . . . . . . . . . . . . . . . . . . 237
DR2SC0120 . . . . . . . . . . . . . . . . . . . 237
DR2SC0150 . . . . . . . . . . . . . . . . . . . 237
DR2SC0180 . . . . . . . . . . . . . . . . . . . 237
DR2SC0220 . . . . . . . . . . . . . . . 209, 237
DR2SC0270 . . . . . . . . . . . . . . . 209, 237
DR2SC0330 . . . . . . . . . . . . . . . 209, 237
DR2SC0390 . . . . . . . . . . . . . . . 209, 237
DR2SC0470 . . . . . . . . . . . . . . . . . . . 237
DR2SC0560 . . . . . . . . . . . . . . . . . . . 237
DR2SC0680 . . . . . . . . . . . . . . . . . . . 237
DR2SC1000 . . . . . . . . . . . . . . . 209, 237
DR2SC1200 . . . . . . . . . . . . . . . . . . . 209
DR2SC3300 . . . . . . . . . . . . . . . . . . . 209
DR2SC3900 . . . . . . . . . . . . . . . . . . . 209
DR2SC4700 . . . . . . . . . . . . . . . . . . . 209
DR5TE1S . . . . . . . . . . . . . . . . . . . . . 237
DR5TE1U . . . . . . . . . . . . . . . . . . . . . 237
DV1RC155 . . . . . . . . . . . . . . . . . . . . 238
DV1RC201 . . . . . . . . . . . . . . . . . . . . 238
DV1RT292 . . . . . . . . . . . . . . . . . . . . . 238
DX1AP25 . . . . . . . . . . . 56, 72, 134, 137
DX1AP26 . . . . . . . . . . . . . . . . . . . . . . .134
DZ2FF1 . . . . . . . . . . . . . . . . . . . 198, 220
DZ2FF6 . . . . . . . . . . . . . . . . . . . . . . . 198
DZ2FG1 . . . . . . . . . . . . . . . . . . . . . . 198
DZ2FG6 . . . . . . . . . . . . . . . . . . 198, 220
DZ2FH1 . . . . . . . . . . . . . . . . . . . 198, 220
DZ2FH6 . . . . . . . . . . . . . . . . . . . 198, 220
DZ2FJ1 . . . . . . . . . . . . . . . . . . . 198, 220
DZ2FJ6 . . . . . . . . . . . . . . . . . . . . . . . 198
DZ2FK1 . . . . . . . . . . . . . . . . . . . 198, 220
DZ2FK6 . . . . . . . . . . . . . . . . . . . . . . . 198
DZ2FL . . . . . . . . . . . . . . . . . . . . . . . . 198
DZ2FL1 . . . . . . . . . . . . . . . . . . . . . . . 220
DZ2FL2 . . . . . . . . . . . . . . . . . . . . . . . 220
DZ2FL3 . . . . . . . . . . . . . . . . . . . . . . . 220
DZ2FL6 . . . . . . . . . . . . . . . . . . . . . . . 198
DZ2FX6 . . . . . . . . . . . . . . . . . . . . . . . 198
DZ3FA3 . . . . . . . . . . . . . . . . . . . . . . . 196
DZ3GA3 . . . . . . . . . . . . . . . . . . . . . . 196
GV1G09 . . . . . . . . . . . . . . . . . . . . . . . .114
GV2G245 . . . . . . . . . . . . . . . . . . . . . . .114
GV2G445 . . . . . . . . . . . . . . . . . . . . . . .114
GV2ME01 . . . . . . . . . . . . . . . . . . . . . 177
GV2ME02 . . . . . . . . . . . . . . . . . . . . . 177
GV2ME03 . . . . . . . . . . . . . . . . . . . . . 177
GV2ME04 . . . . . . . . . . . . . . . . . . . . . 177
GV2ME05 . . . . . . . . . . . . . . . . . . . . . 177
GV2ME06 . . . . . . . . . . . . . . . . . . . . . 177
GV2ME07 . . . . . . . . . . . . . . . . . . . . . 177
GV2ME08 . . . . . . . . . . . . . . . . . . . . . 177
GV2ME10 . . . . . . . . . . . . . . . . . . . . . 177
GV2ME14 . . . . . . . . . . . . . . . . . . . . . 177
GV2ME16 . . . . . . . . . . . . . . . . . . . . . 177
GV2ME20 . . . . . . . . . . . . . . . . . . . . . 177
GV2ME21 . . . . . . . . . . . . . . . . . . . . . 177
GV2ME22 . . . . . . . . . . . . . . . . . . . . . 177
GV2ME32 . . . . . . . . . . . . . . . . . . . . . 177
GV3A01 . . . . . . . . . . . . . . . . . . . . . . . 177
GV3A02 . . . . . . . . . . . . . . . . . . . . . . . 177
GV3A03 . . . . . . . . . . . . . . . . . . . . . . . 177
GV3A05 . . . . . . . . . . . . . . . . . . . . . . . 177
GV3A06 . . . . . . . . . . . . . . . . . . . . . . . 177
GV3A08 . . . . . . . . . . . . . . . . . . . . . . . 177
GV3A09 . . . . . . . . . . . . . . . . . . . . . . . 177
GV3A7 . . . . . . . . . . . . . . . . . . . . . . . . 177
GV3ME06 . . . . . . . . . . . . . . . . . . . . . 177
L
LA . . . . . . . . . . . . . . . . . . . . . . . . . . . 231
LA1D . . . . . . . . . . . . . . . . . . . . . . . . . 231
LA1DN11G . . . . . . . . . . . . . . . . . . . . 176
LA1DX02 . . . . . . . . . . . . . . . . . . . . . . 107
LA1DX20 . . . . . . . . . . 107, 195, 216, 245
LA1DY20 . . . . . . . . . . 107, 195, 216, 245
LA1DZ31 . . . . . . . . . . 107, 195, 216, 245
LA1DZ40 . . . . . . . . . . 107, 195, 216, 245
LA1KN02 . . . . . . . . . . . . . . . . . . . . 55, 72
LA1KN023 . . . . . . . . . . . . . . . . . . . 55, 72
LA1KN027 . . . . . . . . . . . . . . . . . . . 55, 72
LA1KN02M . . . . . . . . . . . . . . . . . . 55, 72
LA1KN04 . . . . . . . . . . . . . . . . . . . . . . . 55
LA1KN043 . . . . . . . . . . . . . . . . . . . . . . 55
LA1KN047 . . . . . . . . . . . . . . . . . . . . . . 55
LA1KN11 . . . . . . . . . . . . . . . . . . . . 55, 72
LA1KN113 . . . . . . . . . . . . . . . . . . . 55, 72
LA1KN117 . . . . . . . . . . . . . . . . . . . 55, 72
LA1KN11M . . . . . . . . . . . . . . . . . . 55, 72
LA1KN11P . . . . . . . . . . . . . . . . . . . 55, 72
LA1KN13 . . . . . . . . . . . . . . . . . . . . . . . 55
LA1KN133 . . . . . . . . . . . . . . . . . . . . . . 55
LA1KN137 . . . . . . . . . . . . . . . . . . . . . . 55
LA1KN13M . . . . . . . . . . . . . . . . . . . . . 55
LA1KN20 . . . . . . . . . . . . . . . . . . . . 55, 72
LA1KN203 . . . . . . . . . . . . . . . . . . . 55, 72
LA1KN207 . . . . . . . . . . . . . . . . . . . 55, 72
LA1KN22 . . . . . . . . . . . . . . . . . . . . . . . 55
LA1KN223 . . . . . . . . . . . . . . . . . . . . . . 55
LA1KN227 . . . . . . . . . . . . . . . . . . . . . . 55
LA1KN22M . . . . . . . . . . . . . . . . . . . . . 55
LA1KN22P . . . . . . . . . . . . . . . . . . . . . . 55
LA1KN31 . . . . . . . . . . . . . . . . . . . . . . . 55
LA1KN313 . . . . . . . . . . . . . . . . . . . . . . 55
LA1KN317 . . . . . . . . . . . . . . . . . . . . . . 55
LA1KN31M . . . . . . . . . . . . . . . . . . . . . 55
LA1KN40 . . . . . . . . . . . . . . . . . . . . . . . 55
LA1KN403 . . . . . . . . . . . . . . . . . . . . . . 55
LA1KN407 . . . . . . . . . . . . . . . . . . . . . . 55
LA2KT2E . . . . . . . . . . . . . . . . . . . . 55, 72
LA2KT2U . . . . . . . . . . . . . . . . . . . . 55, 72
LA4DA2E . . . . . . . . . . . . . . . . . . . . . . .112
LA4DA2G . . . . . . . . . . . . . . . . . . . . . . .112
LA4DA2U . . . . . . . . . . . . . . . . . . . . . . .112
LA4DA2N . . . . . . . . . . . . . . . . . . . . . . .112
LA4DB2B . . . . . . . . . . . . . . . . . . . . . . .112
LA4DB2S . . . . . . . . . . . . . . . . . . . . . . .112
LA4DB3B . . . . . . . . . . . . . . . . . . . . . . .112
LA4DB3S . . . . . . . . . . . . . . . . . . . . . . .112
LA4DC1U . . . . . . . . . . . . . . . . . . . . . . .112
LA4DC3U . . . . . . . . . . . . . . . . . . . . . . .112
LA4DE2E . . . . . . . . . . . . . . . . . . . . . . .112
LA4DE2G . . . . . . . . . . . . . . . . . . . . . . .112
LA4DE2U . . . . . . . . . . . . . . . . . . . . . . .112
LA4DE3E . . . . . . . . . . . . . . . . . . . . . . .112
LA4DE3G . . . . . . . . . . . . . . . . . . . . . . .112
247
© 2001-2004 Schneider Electric All Rights Reserved
01/04
Catalog Number Index
LA9D901. . . . . . . . . . . . . . . . . . . . . . . .114
LA9D92 . . . . . . . . . . . . . . . . . . . . . . . .114
LA9D93. . . . . . . . . . . . . . . . . . . . . . . . .114
LA9D941 . . . . . . . . . . . . . . . . . . . . . . .114
LA9D973 . . . . . . . . . . . . . . . . . . . . 56, 72
LA9D9PVGV . . . . . . . . . . . . . . . . . . . . 98
LA9E01 . . . . . . . . . . . . . . . . . . . . . 56, 72
LA9E02 . . . . . . . . . . . . . . . . . . . . . 56, 72
LA9F . . . . . . . . . . . . . . . . . . . . . . . . . 233
LA9F103 . . . . . . . . . . . . . . 137, 198, 231
LA9F15076 . . . . . . . . . . . . . . . . . . . . 191
LA9F15077 . . . . . . . . . . . . . . . . . . . . 193
LA9F15082 . . . . . . . . . . . . . . . . . . . . 191
LA9F22576 . . . . . . . . . . . . . . . . . . . . 191
LA9F22577 . . . . . . . . . . . . . . . . . . . . 193
LA9F22582 . . . . . . . . . . . . . . . . . . . . 191
LA9F701 . . . . . . . . . . . . . . . . . . 198, 221
LA9F702 . . . . . . . . . . . . . . . . . . 198, 221
LA9F703 . . . . . . . . . . . . . . . . . . 198, 221
LA9F704 . . . . . . . . . . . . . . . . . . . . . . 198
LA9F705 . . . . . . . . . . . . . . . . . . . . . . 221
LA9F706 . . . . . . . . . . . . . . . . . . . . . . 198
LA9F707 . . . . . . . . . . . . . . . . . . . . . . 198
LA9F708 . . . . . . . . . . . . . . . . . . . . . . 198
LA9F709 . . . . . . . . . . . . . . . . . . . . . . 198
LA9F980 . . . . . . . . . . . . . . . . . . . . . . 196
LA9FF4F . . . . . . . . . . . . . . 191, 193, 233
LA9FF601 . . . . . . . . . . . . . . . . . . . . . 196
LA9FF602 . . . . . . . . . . . . . . . . . . . . . 196
LA9FF970 . . . . . . . . . . . . . 191, 193, 233
LA9FF976 . . . . . . . . . . . . . . . . . 191, 233
LA9FF977 . . . . . . . . . . . . . . . . . 193, 233
LA9FF979 . . . . . . . . . . . . . . . . . . . . . 197
LA9FF980 . . . . . . . . . . . . . . . . . . . . . 197
LA9FF981 . . . . . . . . . . . . . . . . . . . . . 197
LA9FF982 . . . . . . . . . . . . . . . . . . . . . 191
LA9FG4F . . . . . . . . . . . . . . . . . . 193, 233
LA9FG4G . . . . . . . . . . . . . 191, 193, 233
LA9FG601 . . . . . . . . . . . . . . . . . . . . . 196
LA9FG602 . . . . . . . . . . . . . . . . . . . . . 196
LA9FG970 . . . . . . . . . . . . . 191, 193, 233
LA9FG976 . . . . . . . . . . . . . . . . . 191, 233
LA9FG977 . . . . . . . . . . . . . . . . . 193, 233
LA9FG979 . . . . . . . . . . . . . . . . . . . . . 197
LA9FG980 . . . . . . . . . . . . . . . . . . . . . 197
LA9FG981 . . . . . . . . . . . . . . . . . . . . . 197
LA9FG982 . . . . . . . . . . . . . . . . . . . . . 193
LA9FH4F . . . . . . . . . . . . . . . . . . 193, 233
LA9FH4G . . . . . . . . . . . . . . . . . . 193, 233
LA9FH4H . . . . . . . . . . . . . . 191, 193, 233
LA9FH601 . . . . . . . . . . . . . . . . . . . . . 196
LA9FH602 . . . . . . . . . . . . . . . . . . . . . 196
LA9FH976 . . . . . . . . . . . . . . . . . 191, 233
LA9FH977 . . . . . . . . . . . . . . . . . 193, 233
LA9FH982 . . . . . . . . . . . . . . . . . . . . . 191
LA9FJ4F . . . . . . . . . . . . . . . . . . 193, 233
LA9FJ4G . . . . . . . . . . . . . . . . . . 193, 233
LA9FJ4H . . . . . . . . . . . . . . . . . . 193, 233
LA9FJ4J . . . . . . . . . . . . . . 191, 193, 233
LA9FJ970 . . . . . . . . . . . . . 191, 193, 233
LA9FJ976 . . . . . . . . . . . . . . . . . 191, 233
LA9FJ977 . . . . . . . . . . . . . . . . . 193, 233
LA9FJ979 . . . . . . . . . . . . . . . . . . . . . 197
LA9FJ980 . . . . . . . . . . . . . . . . . . . . . 197
LA9FJ981 . . . . . . . . . . . . . . . . . . . . . 197
LA9FJ982 . . . . . . . . . . . . . . . . . . . . . 191
LA9FK4F . . . . . . . . . . . . . . . . . . 193, 233
LA9FK4G . . . . . . . . . . . . . . . . . . 193, 233
LA9FK4H . . . . . . . . . . . . . . . . . . 193, 233
LA9FK4J . . . . . . . . . . . . . . . . . . 193, 233
LA9FK4K . . . . . . . . . . . . . . 191, 193, 233
LA9FK601 . . . . . . . . . . . . . . . . . . . . . 196
LA9FK602 . . . . . . . . . . . . . . . . . . . . . 196
LA9FK976 . . . . . . . . . . . . . . . . . 191, 233
LA9FK977 . . . . . . . . . . . . . . . . . 193, 233
LA9FK979 . . . . . . . . . . . . . . . . . . . . . 197
LA9FK980 . . . . . . . . . . . . . . . . . . . . . 197
LA9FK981 . . . . . . . . . . . . . . . . . . . . . 197
LA9FK982 . . . . . . . . . . . . . . . . . . . . . 191
LA9FL4F . . . . . . . . . . . . . . . . . . 193, 233
LA9FL4G . . . . . . . . . . . . . . . . . . 193, 233
LA9FL4H . . . . . . . . . . . . . . . . . . 193, 233
LA9FL4J . . . . . . . . . . . . . . . . . . 193, 233
LA9FL4K . . . . . . . . . . . . . . . . . . 193, 233
LA9FL4L . . . . . . . . . . . . . . 191, 193, 233
LA9FL601 . . . . . . . . . . . . . . . . . . . . . 196
LA9FL602 . . . . . . . . . . . . . . . . . . . . . 196
LA9FL970 . . . . . . . . . . . . . 191, 193, 233
LA9FL976 . . . . . . . . . . . . . . . . . 191, 233
LA9FL977 . . . . . . . . . . . . . . . . . 193, 233
LA9FL979 . . . . . . . . . . . . . . . . . . . . . 197
LA9FL980 . . . . . . . . . . . . . . . . . . . . . . 197
LA9FL981 . . . . . . . . . . . . . . . . . . . . . . 197
LA9FL982 . . . . . . . . . . . . . . . . . . . . . . 191
LA9FX970 . . . . . . . . . . . . . . . . . . . . . 191
LA9FX971u . . . . . . . . . . . . . . . . . . . . 193
LA9K0969 . . . . . . . . . . . . . . . . . . . . 56, 72
LA9K0970 . . . . . . . . . . . . . . . . . . . . 56, 72
LA9P5152 . . . . . . . . . . . . . . . . . . . . . . 114
LA9TD32 . . . . . . . . . . . . . . . . . . . . . . . 155
LA9TD80 . . . . . . . . . . . . . . . . . . . . . . . 155
LAD21 . . . . . . . . . . . . . . . . . . . . . . . . . 114
LAD22 . . . . . . . . . . . . . . . . . . . . . . . . . 114
LAD23 . . . . . . . . . . . . . . . . . . . . . . . . . 114
LAD24 . . . . . . . . . . . . . . . . . . . . . . . . . 114
LAD3PVPG . . . . . . . . . . . . . . . . . . . . . 98
LAD4 . . . . . . . . . . . . . . . . . . . . . . . . . . 112
LAD4BB. . . . . . . . . . . . . . . . 109, 111, 114
LAD4BBVE . . . . . . . . . . . . . . . . . . . . . 114
LAD4BBVG . . . . . . . . . . . . . . . . . . . . . 114
LAD4BBVU . . . . . . . . . . . . . . . . . . . . . 114
LAD6K10. . . . . . . . . . . . . . . . . . . . . . . 108
LAD8N11 . . . . . . . . . . . . . . . . . . 107, 176
LAD8N20 . . . . . . . . . . . . . . . . . . 107, 176
LAD8N02. . . . . . . . . . . . . . . . . . . . . . . 107
LAD7C. . . . . . . . . . . . . . . . . . . . . . . . . 137
LAD7C2. . . . . . . . . . . . . . . . . . . . . . . . 137
LAD7B10. . . . . . . . . . . . . . . . . . . . . . . 137
LAD7B105. . . . . . . . . . . . . . . . . . . . . 137
LAD7305 . . . . . . . . . . . . . . . . . . . . . 137
LAD703 . . . . . . . . . . . . . . . . . . . . . . . 137
LAD8 . . . . . . . . . . . . . . . . . . . . . . . . . 100
LAD9091 . . . . . . . . . . . . . . . . . . . . . . 165
LAD9092 . . . . . . . . . . . . . . . . . . . . . . 165
LAD91217 . . . . . . . . . . . . . . . . . . . . . 149
LAD912GVq . . . . . . . . . . . . . . . . . . . . 149
LAD91810 . . . . . . . . . . . . . . . . . . . . . . 165
LAD93217 . . . . . . . . . . . . . . . . . . . . . 149
LAD96060 . . . . . . . . . . . . . . . . . . . . . . 113
LAD9P3. . . . . . . . . . . . . . . . . . . . . . . . 113
LAD9ECT1 . . . . . . . . . . . . . . . . . . . . . 114
LAD9ET1 . . . . . . . . . . . . . . . . . . . . . . 114
LAD9ET2. . . . . . . . . . . . . . . . . . . . . . . 114
LAD9ET3. . . . . . . . . . . . . . . . . . . . . . . 114
LAD9ET4. . . . . . . . . . . . . . . . . . . . . . . 114
LAD9R1 . . . . . . . . . . . . . . . . . . . . . . . . 98
LAD9R1V . . . . . . . . . . . . . . . . . . . . . . . 98
LAD9T4 . . . . . . . . . . . . . . . . . . . . . . . . 165
LAD9V1 . . . . . . . . . . . . . . . . . . . . . . . . 98
LAD9V10 . . . . . . . . . . . . . . . . . . . . . . . 98
LAD9V11 . . . . . . . . . . . . . . . . . . . . . . . 98
LAD9V12 . . . . . . . . . . . . . . . . . . . . . . . 98
LAD9V13 . . . . . . . . . . . . . . . . . . . . . . . 98
LAD9V2 . . . . . . . . . . . . . . . . . . . . . . . . 98
LAD9V5 . . . . . . . . . . . . . . . . . . . . . . . . 98
LAD9V6 . . . . . . . . . . . . . . . . . . . . . . . . 98
LADC22 . . . . . . . . . . . . . . . 107, 176, 195
LADLVRT. . . . . . . . . . . . . . . . . . . . . . . 109
LADN01 . . . . . . . . . . . . . . . 107, 176, 195
LADN02 . . . . . . . . . . . . . . . 107, 176, 195
LADN04 . . . . . . . . . . . . . . . 107, 176, 195
LADN10 . . . . . . . . . . . . . . . 107, 176, 195
LADN11 . . . . . . . . . . . . . . . 107, 176, 195
LADN11G . . . . . . . . . . . . . . 107, 176, 195
LADN11P . . . . . . . . . . . . . . 107, 176, 195
LADN13 . . . . . . . . . . . . . . . 107, 176, 195
LADN20 . . . . . . . . . . . . . . . 107, 176, 195
LADN22 . . . . . . . . . . . . . . . 107, 176, 195
LADN22G . . . . . . . . . . . . . . 107, 176, 195
LADN22P . . . . . . . . . . . . . . 107, 176, 195
LADN31 . . . . . . . . . . . . . . . 107, 176, 195
LADN31G . . . . . . . . . . . . . . . . . . . . . . 176
LADN31P . . . . . . . . . . . . . . . . . . . . . . 176
LADN40 . . . . . . . . . . . . . . . 107, 176, 195
LADR0 . . . . . . . . . . . . . . . . 108, 176, 195
LADR2 . . . . . . . . . . . . . . . . 108, 176, 195
LADR4 . . . . . . . . . . . . . . . . 108, 176, 195
LADS2 . . . . . . . . . . . . . . . . 108, 176, 195
LADT0 . . . . . . . . . . . . . . . . 108, 176, 195
LADT2 . . . . . . . . . . . . . . . . 108, 176, 195
LADT4 . . . . . . . . . . . . . . . . 108, 176, 195
LC1D09 . . . . . . . . . 88, 91, 149, 175, 176
LC1D093 . . . . . . . . . . . . . . . . . . . . 89, 91
LC1D096 . . . . . . . . . . . . . . . . 90, 92, 175
LC1D098 . . . . . . . . . . . . . . . . . . . . . . . 91
LC1D0983 . . . . . . . . . . . . . . . . . . . . . . 91
LC1D0986 . . . . . . . . . . . . . . . . . . . . . . 92
LC1D099 . . . . . . . . . . . . . . . . . . . . . . 175
LC1D115 . . . . . . . . . . . . 88, 91, 149, 175
LC1D115004 . . . . . . . . . . . . . . . . . . . . 91
LC1D1150046 . . . . . . . . . . . . . . . . . . . 92
LC1D1156 . . . . . . . . . . . . . . . 90, 92, 175
LC1D12 . . . . . . . . . 88, 91, 149, 175, 176
LC1D123 . . . . . . . . . . . . . . . . . . . . 89, 91
LC1D126 . . . . . . . . . . . . . . . . 90, 92, 175
LC1D128 . . . . . . . . . . . . . . . . . . . 91, 175
LC1D1283 . . . . . . . . . . . . . . . . . . . . . . 91
LC1D1286 . . . . . . . . . . . . . . . . . . . . . . 92
LC1D129 . . . . . . . . . . . . . . . . . . . . . . 175
LC1D150 . . . . . . . . . . . . 88, 91, 149, 175
LC1D1506 . . . . . . . . . . . . . . . 90, 92, 175
LC1D18 . . . . . . . . . 88, 91, 149, 175, 176
LC1D183 . . . . . . . . . . . . . . . . . . . . 89, 91
LC1D186 . . . . . . . . . . . . . . . . 90, 92, 175
LC1D25 . . . . . . . . . . . . . 88, 91, 175, 176
LC1D253 . . . . . . . . . . . . . . . . . . . . 89, 91
LC1D256 . . . . . . . . . . . . . . . . 90, 92, 175
LC1D258 . . . . . . . . . . . . . . . . . . . 91, 175
LC1D2583 . . . . . . . . . . . . . . . . . . . . . . 91
LC1D2586 . . . . . . . . . . . . . . . . . . 92, 175
LC1D32 . . . . . . . . . . . . . 88, 91, 149, 175
LC1D323 . . . . . . . . . . . . . . . . . . . . . . . 89
LC1D326 . . . . . . . . . . . . . . . . 90, 92, 175
LC1D38 . . . . . . . . . . . . . . . . . 88, 91, 175
LC1D383 . . . . . . . . . . . . . . . . . . . . . . . 89
LC1D386 . . . . . . . . . . . . . . . . 90, 92, 175
LC1D40 . . . . . . . . . . . . . 88, 91, 149, 175
LC1D40004 . . . . . . . . . . . . . . . . . . . . . 91
LC1D400046 . . . . . . . . . . . . . . . . . . . . 92
LC1D40008 . . . . . . . . . . . . . . . . . . . . . 91
LC1D400086 . . . . . . . . . . . . . . . . . . . . 92
LC1D406 . . . . . . . . . . . . . . . . 90, 92, 175
LC1D50 . . . . . . . . . . . . . 88, 91, 149, 175
LC1D506 . . . . . . . . . . . . . . . . . . . 90, 175
LC1D6LE7 . . . . . . . . . . . . . . . . . . . . . 118
LC1D65 . . . . . . . . . . . . . . . . . 88, 91, 175
LC1D65004 . . . . . . . . . . . . . . . . . . . . . 91
LC1D800046 . . . . . . . . . . . . . . . . . . . . 92
LC1D65008 . . . . . . . . . . . . . . . . . . . . . 91
LC1D800086 . . . . . . . . . . . . . . . . . . . . 92
LC1D806 . . . . . . . . . . . . . . . . 90, 92, 175
LC1D80 . . . . . . . . . . . . . 88, 91, 149, 175
LC1D80004 . . . . . . . . . . . . . . . . . . . . . 91
LC1D800046 . . . . . . . . . . . . . . . . . . . . 92
LC1D80008 . . . . . . . . . . . . . . . . . . . . . 91
LC1D800086 . . . . . . . . . . . . . . . . . . . . 92
LC1D806 . . . . . . . . . . . . . . . . 90, 92, 175
LC1D95 . . . . . . . . . . . . . . 88, 91, 92, 175
LC1D956 . . . . . . . . . . . . . . . . . . . 90, 175
LC1DFK02 . . . . . . . . . . . . . . . . . . . . 142
LC1DFK11 . . . . . . . . . . . . . . . . . . . . 142
LC1DGK02 . . . . . . . . . . . . . . . . . . . . 142
LC1DGK11 . . . . . . . . . . . . . . . . . . . . 142
LC1DLK02 . . . . . . . . . . . . . . . . . . . . . 142
LC1DLK11 . . . . . . . . . . . . . . . . . . . . . 142
LC1DMK02 . . . . . . . . . . . . . . . . . . . . 142
LC1DMK11 . . . . . . . . . . . . . . . . . . . . 142
LC1DPK12 . . . . . . . . . . . . . . . . . . . . 142
LC1DT188 . . . . . . . . . . . . . . . . . . . . . . 91
LC1DT1886 . . . . . . . . . . . . . . . . . . . . . 92
LC1DT20 . . . . . . . . . . . . . . . . . . . . . . . 91
LC1DT203 . . . . . . . . . . . . . . . . . . . . . . 91
LC1DT206 . . . . . . . . . . . . . . . . . . . . . . 92
LC1DT25 . . . . . . . . . . . . . . . . . . . 91, 175
LC1DT253 . . . . . . . . . . . . . . . . . . . . . . 91
LC1DT256 . . . . . . . . . . . . . . . . . . 92, 175
LC1DT2583 . . . . . . . . . . . . . . . . . . . . . 91
LC1DT32 . . . . . . . . . . . . . . . . . . . . . . . 91
LC1DT323 . . . . . . . . . . . . . . . . . . . . . . 91
LC1DT326 . . . . . . . . . . . . . . . . . . . . . . 92
LC1DT40 . . . . . . . . . . . . . . . . . . . 91, 175
LC1DT403 . . . . . . . . . . . . . . . . . . . . . . 91
LC1DT406 . . . . . . . . . . . . . . . . . . 92, 175
LC1DTK12 . . . . . . . . . . . . . . . . . . . . 142
LC1DWK12 . . . . . . . . . . . . . . . . . . . . 142
LC1F115 . . . . . . . . . . . . . . . . . . 188, 189
LC1F1154 . . . . . . . . . . . . . . . . . 188, 189
LC1F150 . . . . . . . . . . . . . . . . . . 188, 189
LC1F1504 . . . . . . . . . . . . . . . . . 188, 189
LC1F185 . . . . . . . . . . . . . . . . . . 188, 189
LC1F1854 . . . . . . . . . . . . . . . . . 188, 189
LC1F225 . . . . . . . . . . . . . . . . . . 188, 189
LC1F2254 . . . . . . . . . . . . . . . . . 188, 189
LC1F265 . . . . . . . . . . . . . . . . . . 188, 189
LC1F2654 . . . . . . . . . . . . . . . . . 188, 189
LC1F330 . . . . . . . . . . . . . . . . . . 188, 189
LC1F3304 . . . . . . . . . . . . . . . . . 188, 189
LC1F400 . . . . . . . . . . . . . . . . . . 188, 189
LC1F4002 . . . . . . . . . . . . . . . . . 188, 189
LC1F4004 . . . . . . . . . . . . . . . . . 188, 189
LC1F500 . . . . . . . . . . . . . . . . . . 188, 189
LC1F5002 . . . . . . . . . . . . . . . . . 188, 189
LC1F5004 . . . . . . . . . . . . . . . . . 188, 189
LC1F630 . . . . . . . . . . . . . . . . . . 188, 189
LC1F6302 . . . . . . . . . . . . . . . . . 188, 189
LC1F6304 . . . . . . . . . . . . . . . . . 188, 189
LC1F780 . . . . . . . . . . . . . . . . . . 188, 189
LC1F7804 . . . . . . . . . . . . . . . . . 188, 189
LC1F800 . . . . . . . . . . . . . . . . . . 188, 189
LC1K0601 . . . . . . . . . . . . . . . . . . . . . . 43
LC1K06013 . . . . . . . . . . . . . . . . . . . . . 43
LC1K06015 . . . . . . . . . . . . . . . . . . . . . 43
LC1K06017 . . . . . . . . . . . . . . . . . . . . . 43
LC1K0610 . . . . . . . . . . . . . . . . . . . . . . 43
LC1K06103 . . . . . . . . . . . . . . . . . . . . . 43
LC1K06105 . . . . . . . . . . . . . . . . . . . . . 43
LC1K06107 . . . . . . . . . . . . . . . . . . . . . 43
LC1K09004 . . . . . . . . . . . . . . . . . . . . . 46
LC1K090043 . . . . . . . . . . . . . . . . . 46, 47
LC1K090045 . . . . . . . . . . . . . . . . . . . . 46
LC1K090047 . . . . . . . . . . . . . . . . . . . . 46
LC1K09008 . . . . . . . . . . . . . . . . . . . . . 46
LC1K090083 . . . . . . . . . . . . . . . . . 46, 47
LC1K090085 . . . . . . . . . . . . . . . . . . . . 46
LC1K090087 . . . . . . . . . . . . . . . . . . . . 46
LC1K0901 . . . . . . . . . . . . . . . . . . . 43, 46
LC1K09013 . . . . . . . . . . . . . . . 43, 46, 47
LC1K09015 . . . . . . . . . . . . . . . . . . 43, 46
LC1K09017 . . . . . . . . . . . . . . . . . . 43, 46
LC1K0910 . . . . . . . . . . . . . . . . . . . 43, 46
LC1K09103 . . . . . . . . . . . . . . . 43, 46, 47
LC1K09105 . . . . . . . . . . . . . . . . . . 43, 46
LC1K09107 . . . . . . . . . . . . . . . . . . 43, 46
LC1K1201 . . . . . . . . . . . . . . . . . . . . . . 43
LC1K12013 . . . . . . . . . . . . . . . . . . . . . 43
LC1K12015 . . . . . . . . . . . . . . . . . . . . . 43
LC1K12017 . . . . . . . . . . . . . . . . . . . . . 43
LC1K1210 . . . . . . . . . . . . . . . . . . . . . . 43
LC1K12103 . . . . . . . . . . . . . . . . . . . . . 43
LC1K12105 . . . . . . . . . . . . . . . . . . . . . 43
LC1K12107 . . . . . . . . . . . . . . . . . . . . . 43
LC1K1601 . . . . . . . . . . . . . . . . . . . . . . 43
LC1K16013 . . . . . . . . . . . . . . . . . . . . . 43
LC1K16015 . . . . . . . . . . . . . . . . . . . . . 43
LC1K16017 . . . . . . . . . . . . . . . . . . . . . 43
LC1K1610 . . . . . . . . . . . . . . . . . . . . . . 43
LC1K16103 . . . . . . . . . . . . . . . . . . . . . 43
LC1K16105 . . . . . . . . . . . . . . . . . . . . . 43
LC1K16107 . . . . . . . . . . . . . . . . . . . . . 43
LC2D09 . . . . . . . . . . . . . . . . . . . . 93, 176
LC2D0906 . . . . . . . . . . . . . . . . . . . . . 176
LC2D093 . . . . . . . . . . . . . . . . . . . . . . . 94
LC2D096 . . . . . . . . . . . . . . . . . . . 95, 176
LC2D099 . . . . . . . . . . . . . . . . . . . . . . 176
LC2D115 . . . . . . . . . . . . . . . . . . . . . . 176
LC2D11500 . . . . . . . . . . . . . . . . . . . . . 93
LC2D115004 . . . . . . . . . . . . . . . . . . . . 96
LC2D1150046²² . . . . . . . . . . . . . . . . . . 97
LC2D1156 . . . . . . . . . . . . . . . . . . 95, 176
LC2D12 . . . . . . . . . . . . . . . . . . . . 93, 176
LC2D123 . . . . . . . . . . . . . . . . . . . . . . . 94
LC2D126 . . . . . . . . . . . . . . . . . . . 95, 176
LC2D129 . . . . . . . . . . . . . . . . . . . . . . 176
LC2D150 . . . . . . . . . . . . . . . . . . . . . . 176
LC2D15000 . . . . . . . . . . . . . . . . . . . . . 93
LC2D1506 . . . . . . . . . . . . . . . . . . 95, 176
LC2D18 . . . . . . . . . . . . . . . . . . . . 93, 176
LC2D183 . . . . . . . . . . . . . . . . . . . . . . . 94
LC2D186 . . . . . . . . . . . . . . . . . . . 95, 176
LC2D25 . . . . . . . . . . . . . . . . . . . . 93, 176
LC2D253 . . . . . . . . . . . . . . . . . . . . . . . 94
LC2D256 . . . . . . . . . . . . . . . . . . . 95, 176
LC2D32 . . . . . . . . . . . . . . . . . . . . 93, 176
LC2D323 . . . . . . . . . . . . . . . . . . . . . . . 94
LC2D326 . . . . . . . . . . . . . . . . . . . 95, 176
LC2D38 . . . . . . . . . . . . . . . . . . . . 93, 176
LC2D383 . . . . . . . . . . . . . . . . . . . . . . . 94
LC2D386 . . . . . . . . . . . . . . . . . . . 95, 176
LC2D40 . . . . . . . . . . . . . . . . . . . . 93, 176
LC2D50 . . . . . . . . . . . . . . . . . . . . 93, 176
LC2D65 . . . . . . . . . . . . . . . . . . . . 93, 176
LC2D65004 . . . . . . . . . . . . . . . . . . . . . 96
LC2D650046 . . . . . . . . . . . . . . . . . . . . 97
LC2D80 . . . . . . . . . . . . . . . . . . . . 93, 176
LC2D80004 . . . . . . . . . . . . . . . . . . . . . 96
LC2D800046 . . . . . . . . . . . . . . . . . . . . 97
LC2D95 . . . . . . . . . . . . . . . . . . . . 93, 176
LC2DT20 . . . . . . . . . . . . . . . . . . . . 96, 97
LC2DT25 . . . . . . . . . . . . . . . . 96, 97, 176
LC2DT256 . . . . . . . . . . . . . . . . . . . . . 176
LC2DT32 . . . . . . . . . . . . . . . . . . . . 96, 97
LC2DT40 . . . . . . . . . . . . . . . . 96, 97, 176
LC2DT406 . . . . . . . . . . . . . . . . . . . . . 176
LC2DT60 . . . . . . . . . . . . . . . . . . . . 96, 97
248
© 2001-2004 Schneider Electric All Rights Reserved
01/04
Catalog Number Index
LC2K0601 . . . . . . . . . . . . . . . . . . . . . . 48
LC2K06013 . . . . . . . . . . . . . . . . . . . . . 48
LC2K06015 . . . . . . . . . . . . . . . . . . . . . 48
LC2K06017 . . . . . . . . . . . . . . . . . . . . . 48
LC2K0610 . . . . . . . . . . . . . . . . . . . . . . 48
LC2K06103 . . . . . . . . . . . . . . . . . . . . . 48
LC2K06105 . . . . . . . . . . . . . . . . . . . . . 48
LC2K06107 . . . . . . . . . . . . . . . . . . . . . 48
LC2K09004 . . . . . . . . . . . . . . . . . . . . . 51
LC2K090043 . . . . . . . . . . . . . . . . . . . . 51
LC2K090045 . . . . . . . . . . . . . . . . . . . . 51
LC2K090047 . . . . . . . . . . . . . . . . . . . . 51
LC2K0901 . . . . . . . . . . . . . . . . . . . 48, 51
LC2K09013 . . . . . . . . . . . . . . . . . . 48, 51
LC2K09015 . . . . . . . . . . . . . . . . . . 48, 51
LC2K09017 . . . . . . . . . . . . . . . . . . 48, 51
LC2K0910 . . . . . . . . . . . . . . . . . . . 48, 51
LC2K09103 . . . . . . . . . . . . . . . . . . 48, 51
LC2K09105 . . . . . . . . . . . . . . . . . . 48, 51
LC2K09107 . . . . . . . . . . . . . . . . . . 48, 51
LC2K1201 . . . . . . . . . . . . . . . . . . . . . . 48
LC2K12013 . . . . . . . . . . . . . . . . . . . . . 48
LC2K12015 . . . . . . . . . . . . . . . . . . . . . 48
LC2K12017 . . . . . . . . . . . . . . . . . . . . . 48
LC2K1210 . . . . . . . . . . . . . . . . . . . . . . 48
LC2K12103 . . . . . . . . . . . . . . . . . . . . . 48
LC2K12105 . . . . . . . . . . . . . . . . . . . . . 48
LC2K12107 . . . . . . . . . . . . . . . . . . . . . 48
LC2K1601 . . . . . . . . . . . . . . . . . . . . . . 48
LC2K16013 . . . . . . . . . . . . . . . . . . . . . 48
LC2K16015 . . . . . . . . . . . . . . . . . . . . . 48
LC2K16017 . . . . . . . . . . . . . . . . . . . . . 48
LC2K1610 . . . . . . . . . . . . . . . . . . . . . . 48
LC2K16103 . . . . . . . . . . . . . . . . . . . . . 48
LC2K16105 . . . . . . . . . . . . . . . . . . . . . 48
LC2K16107 . . . . . . . . . . . . . . . . . . . . . 48
LC3D090A . . . . . . . . . . . . . . . . . . . . . 146
LC3D09A . . . . . . . . . . . . . . . . . . . . . . 146
LC3D115 . . . . . . . . . . . . . . . . . . . . . . 146
LC3D120A . . . . . . . . . . . . . . . . . . . . . 146
LC3D12A . . . . . . . . . . . . . . . . . . . . . . 146
LC3D150 . . . . . . . . . . . . . . . . . . . . . . 146
LC3D180A . . . . . . . . . . . . . . . . . . . . . 146
LC3D18A . . . . . . . . . . . . . . . . . . . . . . 146
LC3D320A . . . . . . . . . . . . . . . . . . . . . 146
LC3D32A . . . . . . . . . . . . . . . . . . . . . . 146
LC3D40 . . . . . . . . . . . . . . . . . . . . . . . 146
LC3D50 . . . . . . . . . . . . . . . . . . . . . . . 146
LC3D80 . . . . . . . . . . . . . . . . . . . . . . . 146
LC3K06 . . . . . . . . . . . . . . . . . . . . . . . 146
LC3K09 . . . . . . . . . . . . . . . . . . . . . . . 146
LC4D09A . . . . . . . . . . . . . . . . . . . . . . 144
LC4D12A . . . . . . . . . . . . . . . . . . . . . . 144
LC4D18A . . . . . . . . . . . . . . . . . . . . . . 144
LC4D25A . . . . . . . . . . . . . . . . . . . . . . 144
LC4D32A . . . . . . . . . . . . . . . . . . . . . . 144
LC4D40 . . . . . . . . . . . . . . . . . . . . . . . 144
LC4D50 . . . . . . . . . . . . . . . . . . . . . . . 144
LC4D65 . . . . . . . . . . . . . . . . . . . . . . . 144
LC4D80 . . . . . . . . . . . . . . . . . . . . . . . 144
LC7K0601 . . . . . . . . . . . . . . . . . . . . . . 44
LC7K06015 . . . . . . . . . . . . . . . . . . . . . 44
LC7K06017 . . . . . . . . . . . . . . . . . . . . . 44
LC7K0610 . . . . . . . . . . . . . . . . . . . . . . 44
LC7K06105 . . . . . . . . . . . . . . . . . . . . . 44
LC7K06107 . . . . . . . . . . . . . . . . . . . . . 44
LC7K09004 . . . . . . . . . . . . . . . . . . . . . 46
LC7K090045 . . . . . . . . . . . . . . . . . . . . 46
LC7K090047 . . . . . . . . . . . . . . . . . . . . 46
LC7K09008 . . . . . . . . . . . . . . . . . . . . . 46
LC7K090085 . . . . . . . . . . . . . . . . . . . . 46
LC7K090087 . . . . . . . . . . . . . . . . . . . . 46
LC7K0901 . . . . . . . . . . . . . . . . . . . 44, 46
LC7K09015 . . . . . . . . . . . . . . . . . . 44, 46
LC7K09017 . . . . . . . . . . . . . . . . . . 44, 46
LC7K0910 . . . . . . . . . . . . . . . . . . . 44, 46
LC7K09105 . . . . . . . . . . . . . . . . . . 44, 46
LC7K09107 . . . . . . . . . . . . . . . . . . 44, 46
LC7K1201 . . . . . . . . . . . . . . . . . . . . . . 44
LC7K12015 . . . . . . . . . . . . . . . . . . . . . 44
LC7K12017 . . . . . . . . . . . . . . . . . . . . . 44
LC7K1210 . . . . . . . . . . . . . . . . . . . . . . 44
LC7K12105 . . . . . . . . . . . . . . . . . . . . . 44
LC7K12107 . . . . . . . . . . . . . . . . . . . . . 44
LC8K0601 . . . . . . . . . . . . . . . . . . . . . . 49
LC8K06015 . . . . . . . . . . . . . . . . . . . . . 49
LC8K06017 . . . . . . . . . . . . . . . . . . . . . 49
LC8K0610 . . . . . . . . . . . . . . . . . . . . . . 49
LC8K06105 . . . . . . . . . . . . . . . . . . . . . 49
LC8K06107 . . . . . . . . . . . . . . . . . . . . . 49
LC8K09004 . . . . . . . . . . . . . . . . . . . . . 51
LC8K090045 . . . . . . . . . . . . . . . . . . . . 51
LC8K090047 . . . . . . . . . . . . . . . . . . . . 51
LC8K0901 . . . . . . . . . . . . . . . . . . . 49, 51
LC8K09015 . . . . . . . . . . . . . . . . . . 49, 51
LC8K09017 . . . . . . . . . . . . . . . . . . 49, 51
LC8K0910 . . . . . . . . . . . . . . . . . . . 49, 51
LC8K09105 . . . . . . . . . . . . . . . . . . 49, 51
LC8K09107 . . . . . . . . . . . . . . . . . . 49, 51
LC8K1201 . . . . . . . . . . . . . . . . . . . . . . 49
LC8K12015 . . . . . . . . . . . . . . . . . . . . . 49
LC8K12017 . . . . . . . . . . . . . . . . . . . . . 49
LC8K1210 . . . . . . . . . . . . . . . . . . . . . . 49
LC8K12105 . . . . . . . . . . . . . . . . . . . . . 49
LC8K12107 . . . . . . . . . . . . . . . . . . . . . 49
LE1D09. . . . . . . . . . . . . . . . . . . . . . . . 159
LE1D093A6 . . . . . . . . . . . . . . . . . . . . 151
LE1D093A7 . . . . . . . . . . . . . . . . . . . . 151
LE1D096B6 . . . . . . . . . . . . . . . . . . . . 153
LE1D096B7 . . . . . . . . . . . . . . . . . . . . 153
LE1D097D6 . . . . . . . . . . . . . . . . . . . . 153
LE1D097D7 . . . . . . . . . . . . . . . . . . . . 153
LE1D12. . . . . . . . . . . . . . . . . . . . . . . . 159
LE1D123A6 . . . . . . . . . . . . . . . . . . . . 151
LE1D126B6 . . . . . . . . . . . . . . . . . . . . 153
LE1D126B7 . . . . . . . . . . . . . . . . . . . . 153
LE1D127D6 . . . . . . . . . . . . . . . . . . . . 153
LE1D127D7 . . . . . . . . . . . . . . . . . . . . 153
LE1D18. . . . . . . . . . . . . . . . . . . . . . . . 159
LE1D183A6 . . . . . . . . . . . . . . . . . . . . 151
LE1D183A7 . . . . . . . . . . . . . . . . . . . . 151
LE1D186B7 . . . . . . . . . . . . . . . . . . . . 153
LE1D187E6 . . . . . . . . . . . . . . . . . . . . 153
LE1D187E7 . . . . . . . . . . . . . . . . . . . . 153
LE1D25. . . . . . . . . . . . . . . . . . . . . . . . 159
LE1D253A6 . . . . . . . . . . . . . . . . . . . . 151
LE1D253A7 . . . . . . . . . . . . . . . . . . . . 151
LE1D256B6 . . . . . . . . . . . . . . . . . . . . 153
LE1D256B7 . . . . . . . . . . . . . . . . . . . . 153
LE1D257E7 . . . . . . . . . . . . . . . . . . . . 153
LE1D323A6 . . . . . . . . . . . . . . . . . . . . 151
LE1D323A7 . . . . . . . . . . . . . . . . . . . . 151
LE1D326C6 . . . . . . . . . . . . . . . . . . . . 153
LE1D326C7 . . . . . . . . . . . . . . . . . . . . 153
LE1D327F6. . . . . . . . . . . . . . . . . . . . . 153
LE1D327F7. . . . . . . . . . . . . . . . . . . . . 153
LE1D35. . . . . . . . . . . . . . . . . . . . . . . . 159
LE1D403A6 . . . . . . . . . . . . . . . . . . . . 151
LE1D403A7 . . . . . . . . . . . . . . . . . . . . 151
LE1D405 . . . . . . . . . . . . . . . . . . . . . . 159
LE1D406C6 . . . . . . . . . . . . . . . . . . . . 153
LE1D406C7 . . . . . . . . . . . . . . . . . . . . 153
LE1D407F6. . . . . . . . . . . . . . . . . . . . . 153
LE1D407F7. . . . . . . . . . . . . . . . . . . . . 153
LE1D503A6 . . . . . . . . . . . . . . . . . . . . 151
LE1D503A7 . . . . . . . . . . . . . . . . . . . . 151
LE1D505 . . . . . . . . . . . . . . . . . . . . . . 159
LE1D653A6 . . . . . . . . . . . . . . . . . . . . 151
LE1D653A7 . . . . . . . . . . . . . . . . . . . . 151
LE1D655 . . . . . . . . . . . . . . . . . . . . . . 159
LE1D803A6 . . . . . . . . . . . . . . . . . . . . 151
LE1D803A7 . . . . . . . . . . . . . . . . . . . . 151
LE1D805 . . . . . . . . . . . . . . . . . . . . . . 159
LE1D955 . . . . . . . . . . . . . . . . . . . . . . 159
LE2D09. . . . . . . . . . . . . . . . . . . . . . . . 159
LE2D093A6 . . . . . . . . . . . . . . . . . . . . 151
LE2D093A7 . . . . . . . . . . . . . . . . . . . . 151
LE2D096 . . . . . . . . . . . . . . . . . . . . . . 162
LE2D096B6 . . . . . . . . . . . . . . . . . . . . 153
LE2D096B7 . . . . . . . . . . . . . . . . . . . . 153
LE2D097D6 . . . . . . . . . . . . . . . . . . . . 153
LE2D097D7 . . . . . . . . . . . . . . . . . . . . 153
LE2D12. . . . . . . . . . . . . . . . . . . . . . . . 159
LE2D123A6 . . . . . . . . . . . . . . . . . . . . 151
LE2D123A7 . . . . . . . . . . . . . . . . . . . . 151
LE2D126 . . . . . . . . . . . . . . . . . . . . . . 162
LE2D126B6 . . . . . . . . . . . . . . . . . . . . 153
LE2D126B7 . . . . . . . . . . . . . . . . . . . . 153
LE2D127D6 . . . . . . . . . . . . . . . . . . . . 153
LE2D127D7 . . . . . . . . . . . . . . . . . . . . 153
LE2D18. . . . . . . . . . . . . . . . . . . . . . . . 159
LE2D183A6 . . . . . . . . . . . . . . . . . . . . 151
LE2D183A7 . . . . . . . . . . . . . . . . . . . . 151
LE3D18. . . . . . . . . . . . . . . . . . . . . . . . 163
LE2D186 . . . . . . . . . . . . . . . . . . . . . . 162
LE2D186B6 . . . . . . . . . . . . . . . . . . . . 153
LE2D186B7 . . . . . . . . . . . . . . . . . . . . 153
LE2D187E6 . . . . . . . . . . . . . . . . . . . . 153
LE2D187E7 . . . . . . . . . . . . . . . . . . . . 153
LE2D25. . . . . . . . . . . . . . . . . . . . . . . . 159
LE2D253A6 . . . . . . . . . . . . . . . . . . . . 151
LE2D253A7 . . . . . . . . . . . . . . . . . . . . 151
LE2D256 . . . . . . . . . . . . . . . . . . . . . . 162
LE2D256B6. . . . . . . . . . . . . . . . . . . . . 153
LE2D256B7. . . . . . . . . . . . . . . . . . . . . 153
LE2D257E6. . . . . . . . . . . . . . . . . . . . . 153
LE2D257E7. . . . . . . . . . . . . . . . . . . . . 153
LE2D323A6. . . . . . . . . . . . . . . . . . . . . 151
LE2D323A7. . . . . . . . . . . . . . . . . . . . . 151
LE2D326 . . . . . . . . . . . . . . . . . . . . . . 162
LE2D326C6. . . . . . . . . . . . . . . . . . . . . 153
LE2D326C7. . . . . . . . . . . . . . . . . . . . . 153
LE2D327F6. . . . . . . . . . . . . . . . . . . . . 153
LE2D327F7. . . . . . . . . . . . . . . . . . . . . 153
LE2D35 . . . . . . . . . . . . . . . . . . . . . . . . 159
LE2D403A6. . . . . . . . . . . . . . . . . . . . . 151
LE2D403A7. . . . . . . . . . . . . . . . . . . . . 151
LE2D406 . . . . . . . . . . . . . . . . . . 159, 162
LE2D406C6. . . . . . . . . . . . . . . . . . . . . 153
LE2D406C7. . . . . . . . . . . . . . . . . . . . . 153
LE2D407F6. . . . . . . . . . . . . . . . . . . . . 153
LE2D407F7. . . . . . . . . . . . . . . . . . . . . 153
LE2D503A6. . . . . . . . . . . . . . . . . . . . . 151
LE2D503A7. . . . . . . . . . . . . . . . . . . . . 151
LE2D506 . . . . . . . . . . . . . . . . . . 159, 162
LE2D653A6. . . . . . . . . . . . . . . . . . . . . 151
LE2D653A7. . . . . . . . . . . . . . . . . . . . . 151
LE2D656 . . . . . . . . . . . . . . . . . . . . . . . 159
LE2D803A6. . . . . . . . . . . . . . . . . . . . . 151
LE2D803A7. . . . . . . . . . . . . . . . . . . . . 151
LE2D805 . . . . . . . . . . . . . . . . . . . . . . . 159
LE2D806 . . . . . . . . . . . . . . . . . . . . . . . 159
LE2D655 . . . . . . . . . . . . . . . . . . . . . . 161
LE2D656 . . . . . . . . . . . . . . . . . . . . . . 162
LE2D805 . . . . . . . . . . . . . . . . . . . . . . 163
LE2D806 . . . . . . . . . . . . . . . . . . . . . . 162
LE2D955 . . . . . . . . . . . . . . . . . . . . . . 159
LE2K065 . . . . . . . . . . . . . . . . . . . . . . 159
LE2K095 . . . . . . . . . . . . . . . . . . . . . . 159
LE3D09 . . . . . . . . . . . . . . . . . . . . . . . 163
LE3D12 . . . . . . . . . . . . . . . . . . . . . . . 163
LE3D32 . . . . . . . . . . . . . . . . . . . . . . . . 163
LE3D405 . . . . . . . . . . . . . . . . . . . . . . . 163
LE3D406 . . . . . . . . . . . . . . . . . . . . . . 164
LE3D505 . . . . . . . . . . . . . . . . . . . . . . . 163
LE3D506 . . . . . . . . . . . . . . . . . . . . . . 164
LE3D805 . . . . . . . . . . . . . . . . . . . . . . . 163
LE3D806 . . . . . . . . . . . . . . . . . . . . . . 164
LE3K065 . . . . . . . . . . . . . . . . . . . . . . 163
LE3K095 . . . . . . . . . . . . . . . . . . . . . . 163
LE4K065 . . . . . . . . . . . . . . . . . . . . . . . 159
LE4K095 . . . . . . . . . . . . . . . . . . . . . . . 159
LE4D09 . . . . . . . . . . . . . . . . . . . . . . . . 159
LE4D09 . . . . . . . . . . . . . . . . . . . . . . . . 159
LE4D12 . . . . . . . . . . . . . . . . . . . . . . . . 159
LE4D18 . . . . . . . . . . . . . . . . . . . . . . . . 159
LE4D25 . . . . . . . . . . . . . . . . . . . . . . . . 159
LE4D35 . . . . . . . . . . . . . . . . . . . . . . . . 159
LE4D406 . . . . . . . . . . . . . . . . . . . . . . . 159
LE4D506 . . . . . . . . . . . . . . . . . . . . . . . 159
LE4D656 . . . . . . . . . . . . . . . . . . . . . . . 159
LE4D806 . . . . . . . . . . . . . . . . . . . . . . . 159
LE6D09 . . . . . . . . . . . . . . . . . . . . . . . . 164
LE6D12 . . . . . . . . . . . . . . . . . . . . . . . . 164
LE6D18 . . . . . . . . . . . . . . . . . . . . . . . . 164
LE6D326 . . . . . . . . . . . . . . . . . . . . . . . 164
LE8K065 . . . . . . . . . . . . . . . . . . 159, 162
LE8K095 . . . . . . . . . . . . . . . . . . 159, 162
LE8D09 . . . . . . . . . . . . . . . . . . . . . . . . 159
LE8D12 . . . . . . . . . . . . . . . . . . . . . . . . 159
LE8D18 . . . . . . . . . . . . . . . . . . . . . . . . 159
LE8D25 . . . . . . . . . . . . . . . . . . . . . . . . 159
LE8D35 . . . . . . . . . . . . . . . . . . . . . . . . 159
LP1D40004 . . . . . . . . . . . . . . . . . . 91, 92
LP1D40008 . . . . . . . . . . . . . . . . . . 91, 92
LP1D65004 . . . . . . . . . . . . . . . . . . . . . 91
LP1D800046 . . . . . . . . . . . . . . . . . . . . 92
LP1D65008 . . . . . . . . . . . . . . . . . . . . . 91
LP1D650086 . . . . . . . . . . . . . . . . . . . . 92
LP1D80004 . . . . . . . . . . . . . . . . . . . . . 91
LP1D800046 . . . . . . . . . . . . . . . . . . . . 92
LP1D80008 . . . . . . . . . . . . . . . . . . . . . 91
LP1D800086 . . . . . . . . . . . . . . . . . . . . 92
LP1K0601 . . . . . . . . . . . . . . . . . . . . . . 45
LP1K06013 . . . . . . . . . . . . . . . . . . . . . 45
LP1K06015 . . . . . . . . . . . . . . . . . . . . . 45
LP1K06017 . . . . . . . . . . . . . . . . . . . . . 45
LP1K0610 . . . . . . . . . . . . . . . . . . . . . . 45
LP1K06103 . . . . . . . . . . . . . . . . . . . . . 45
LP1K06105 . . . . . . . . . . . . . . . . . . . . . 45
LP1K06107 . . . . . . . . . . . . . . . . . . . . . 45
LP1K09004 . . . . . . . . . . . . . . . . . . . . . 47
LP1K090045 . . . . . . . . . . . . . . . . . . . . 47
LP1K090047 . . . . . . . . . . . . . . . . . . . . .47
LP1K09008 . . . . . . . . . . . . . . . . . . . . . .47
LP1K090085 . . . . . . . . . . . . . . . . . . . . .47
LP1K090087 . . . . . . . . . . . . . . . . . . . . .47
LP1K0901 . . . . . . . . . . . . . . . . . . . .45, 47
LP1K09013 . . . . . . . . . . . . . . . . . . . . . .45
LP1K09015 . . . . . . . . . . . . . . . . . . .45, 47
LP1K09017 . . . . . . . . . . . . . . . . . . .45, 47
LP1K0910 . . . . . . . . . . . . . . . . . . . .45, 47
LP1K09103 . . . . . . . . . . . . . . . . . . . . . .45
LP1K09105 . . . . . . . . . . . . . . . . . . .45, 47
LP1K09107 . . . . . . . . . . . . . . . . . . .45, 47
LP1K1201 . . . . . . . . . . . . . . . . . . . . . . .45
LP1K12013 . . . . . . . . . . . . . . . . . . . . . .45
LP1K12015 . . . . . . . . . . . . . . . . . . . . . .45
LP1K12017 . . . . . . . . . . . . . . . . . . . . . .45
LP1K1210 . . . . . . . . . . . . . . . . . . . . . . .45
LP1K12103 . . . . . . . . . . . . . . . . . . . . . .45
LP1K12105 . . . . . . . . . . . . . . . . . . . . . .45
LP1K12107 . . . . . . . . . . . . . . . . . . . . . .45
LP2D40004 . . . . . . . . . . . . . . . . . . . . . .96
LP2400046 . . . . . . . . . . . . . . . . . . . . . .97
LP2D80004 . . . . . . . . . . . . . . . . . . . . . .96
LP2D800046 . . . . . . . . . . . . . . . . . . . . .97
LP2K0601 . . . . . . . . . . . . . . . . . . . . . . .50
LP2K06015 . . . . . . . . . . . . . . . . . . . . . .50
LP2K06017 . . . . . . . . . . . . . . . . . . . . . .50
LP2K06103 . . . . . . . . . . . . . . . . . . . . . .50
LP2K06105 . . . . . . . . . . . . . . . . . . . . . .50
LP2K06107 . . . . . . . . . . . . . . . . . . . . . .50
LP2K09004 . . . . . . . . . . . . . . . . . . . . . .52
LP2K090045 . . . . . . . . . . . . . . . . . . . . .52
LP2K090047 . . . . . . . . . . . . . . . . . . . . .52
LP2K09013 . . . . . . . . . . . . . . . . . . .50, 52
LP2K09015 . . . . . . . . . . . . . . . . . . .50, 52
LP2K09017 . . . . . . . . . . . . . . . . . . .50, 52
LP2K09103 . . . . . . . . . . . . . . . . . . .50, 52
LP2K09105 . . . . . . . . . . . . . . . . . . .50, 52
LP2K09107 . . . . . . . . . . . . . . . . . . .50, 52
LP2K12013 . . . . . . . . . . . . . . . . . . . . . .50
LP2K12015 . . . . . . . . . . . . . . . . . . . . . .50
LP2K12017 . . . . . . . . . . . . . . . . . . . . . .50
LP2K1210 3. . . . . . . . . . . . . . . . . . . . . .50
LP2K12105 . . . . . . . . . . . . . . . . . . . . . .50
LP2K12107 . . . . . . . . . . . . . . . . . . . . . .50
LP4K0601 . . . . . . . . . . . . . . . . . . . . . . .68
LP4K06013 . . . . . . . . . . . . . . . . . . . . . .68
LP4K06015 . . . . . . . . . . . . . . . . . . . . . .68
LP4K06017 . . . . . . . . . . . . . . . . . . . . . .68
LP4K0610 . . . . . . . . . . . . . . . . . . . . . . .68
LP4K06103 . . . . . . . . . . . . . . . . . . . . . .68
LP4K06105 . . . . . . . . . . . . . . . . . . . . . .68
LP4K06107 . . . . . . . . . . . . . . . . . . . . . .68
LP4K09004 . . . . . . . . . . . . . . . . . . . . . .70
LP4K090043 . . . . . . . . . . . . . . . . . . . . .70
LP4K090045 . . . . . . . . . . . . . . . . . . . . .70
LP4K090047 . . . . . . . . . . . . . . . . . . . . .70
LP4K09008 . . . . . . . . . . . . . . . . . . . . . .70
LP4K090083 . . . . . . . . . . . . . . . . . . . . .70
LP4K090085 . . . . . . . . . . . . . . . . . . . . .70
LP4K090087 . . . . . . . . . . . . . . . . . . . . .70
LP4K0901 . . . . . . . . . . . . . . . . . . . .68, 70
LP4K09013 . . . . . . . . . . . . . . . . . . .68, 70
LP4K09015 . . . . . . . . . . . . . . . . . . .68, 70
LP4K09017 . . . . . . . . . . . . . . . . . . .68, 70
LP4K0910 . . . . . . . . . . . . . . . . . . . .68, 70
LP4K09103 . . . . . . . . . . . . . . . . . . .68, 70
LP4K09105 . . . . . . . . . . . . . . . . . . .68, 70
LP4K09107 . . . . . . . . . . . . . . . . . . .68, 70
LP4K1201 . . . . . . . . . . . . . . . . . . . . . . .68
LP4K12013 . . . . . . . . . . . . . . . . . . . . . .68
LP4K12015 . . . . . . . . . . . . . . . . . . . . . .68
LP4K12017 . . . . . . . . . . . . . . . . . . . . . .68
LP4K1210 . . . . . . . . . . . . . . . . . . . . . . .68
LP4K12103 . . . . . . . . . . . . . . . . . . . . . .68
LP4K12105 . . . . . . . . . . . . . . . . . . . . . .68
LP4K12107 . . . . . . . . . . . . . . . . . . . . . .68
LP5K0601 . . . . . . . . . . . . . . . . . . . . . . .69
LP5K06013 . . . . . . . . . . . . . . . . . . . . . .69
LP5K06015 . . . . . . . . . . . . . . . . . . . . . .69
LP5K06017 . . . . . . . . . . . . . . . . . . . . . .69
LP5K0610 . . . . . . . . . . . . . . . . . . . . . . .69
LP5K06103 . . . . . . . . . . . . . . . . . . . . . .69
LP5K06105 . . . . . . . . . . . . . . . . . . . . . .69
LP5K06107 . . . . . . . . . . . . . . . . . . . . . .69
LP5K09004 . . . . . . . . . . . . . . . . . . . . . .71
LP5K090043 . . . . . . . . . . . . . . . . . . . . .71
LP5K090045 . . . . . . . . . . . . . . . . . . . . .71
LP5K090047 . . . . . . . . . . . . . . . . . . . . .71
LP5K0901 . . . . . . . . . . . . . . . . . . . .69, 71
LP5K09013 . . . . . . . . . . . . . . . . . . .69, 71
249
© 2001-2004 Schneider Electric All Rights Reserved
01/04
Catalog Number Index
LP5K09015 . . . . . . . . . . . . . . . . . . 69, 71
LP5K09017 . . . . . . . . . . . . . . . . . . 69, 71
LP5K0910 . . . . . . . . . . . . . . . . . . . 69, 71
LP5K09103 . . . . . . . . . . . . . . . . . . 69, 71
LP5K09105 . . . . . . . . . . . . . . . . . . 69, 71
LP5K09107 . . . . . . . . . . . . . . . . . . 69, 71
LP5K1201 . . . . . . . . . . . . . . . . . . . . . . 69
LP5K12013 . . . . . . . . . . . . . . . . . . . . . 69
LP5K12015 . . . . . . . . . . . . . . . . . . . . . 69
LP5K12017 . . . . . . . . . . . . . . . . . . . . . 69
LP5K1210 . . . . . . . . . . . . . . . . . . . . . . 69
LP5K12103 . . . . . . . . . . . . . . . . . . . . . 69
LP5K12105 . . . . . . . . . . . . . . . . . . . . . 69
LP5K12107 . . . . . . . . . . . . . . . . . . . . . 69
LR2K0301 . . . . . . . . . . . . . . . . . . . . . . 63
LR2K0302 . . . . . . . . . . . . . . . . . . . . . . 63
LR2K0303 . . . . . . . . . . . . . . . . . . . . . . 63
LR2K0304 . . . . . . . . . . . . . . . . . . . . . . 63
LR2K0305 . . . . . . . . . . . . . . . . . . . . . . 63
LR2K0306 . . . . . . . . . . . . . . . . . . . . . . 63
LR2K0307 . . . . . . . . . . . . . . . . . . . . . . 63
LR2K0308 . . . . . . . . . . . . . . . . . . . . . . 63
LR2K0310 . . . . . . . . . . . . . . . . . . . . . . 63
LR2K0312 . . . . . . . . . . . . . . . . . . . . . . 63
LR2K0314 . . . . . . . . . . . . . . . . . . . . . . 63
LR2K0316 . . . . . . . . . . . . . . . . . . . . . . 63
LR2K0321 . . . . . . . . . . . . . . . . . . . . . . 63
LR2K0322 . . . . . . . . . . . . . . . . . . . . . . 63
LR3D01 . . . . . . . . . . . . . . . . . . . . . . . 177
LR3D02 . . . . . . . . . . . . . . . . . . . . . . . 177
LR3D03 . . . . . . . . . . . . . . . . . . . . . . . 177
LR3D04 . . . . . . . . . . . . . . . . . . . . . . . 177
LR3D05 . . . . . . . . . . . . . . . . . . . . . . . 177
LR3D06 . . . . . . . . . . . . . . . . . . . . . . . 177
LR3D07 . . . . . . . . . . . . . . . . . . . . . . . 177
LR3D08 . . . . . . . . . . . . . . . . . . . . . . . 177
LR3D10 . . . . . . . . . . . . . . . . . . . . . . . 177
LR3D12 . . . . . . . . . . . . . . . . . . . . . . . 177
LR3D14 . . . . . . . . . . . . . . . . . . . . . . . 177
LR3D16 . . . . . . . . . . . . . . . . . . . . . . . 177
LR3D21 . . . . . . . . . . . . . . . . . . . . . . . 177
LR3D22 . . . . . . . . . . . . . . . . . . . . . . . 177
LR3D32 . . . . . . . . . . . . . . . . . . . . . . . 177
LR3D3322 . . . . . . . . . . . . . . . . . . . . . 177
LR3D3353 . . . . . . . . . . . . . . . . . . . . . 177
LR3D3355 . . . . . . . . . . . . . . . . . . . . . 177
LR3D3357 . . . . . . . . . . . . . . . . . . . . . 177
LR3D3359 . . . . . . . . . . . . . . . . . . . . . 177
LR3D3361 . . . . . . . . . . . . . . . . . . . . . 177
LR3D3363 . . . . . . . . . . . . . . . . . . . . . 177
LR3D3365 . . . . . . . . . . . . . . . . . . . . . 177
LR3D35 . . . . . . . . . . . . . . . . . . . . . . . 177
LR9F5357 . . . . . . . . . . . . . . . . . . . . . 220
LR9F5363 . . . . . . . . . . . . . . . . . . . . . 220
LR9F5367 . . . . . . . . . . . . . . . . . . . . . 220
LR9F5369 . . . . . . . . . . . . . . . . . . . . . 220
LR9F5371 . . . . . . . . . . . . . . . . . . . . . 220
LR9F5557 . . . . . . . . . . . . . . . . . . . . . 220
LR9F5563 . . . . . . . . . . . . . . . . . . . . . 220
LR9F5567 . . . . . . . . . . . . . . . . . . . . . 220
LR9F5569 . . . . . . . . . . . . . . . . . . . . . 220
LR9F5571 . . . . . . . . . . . . . . . . . . . . . 220
LR9F7375 . . . . . . . . . . . . . . . . . . . . . 220
LR9F7379 . . . . . . . . . . . . . . . . . . . . . 220
LR9F7381 . . . . . . . . . . . . . . . . . . . . . 220
LR9F7575 . . . . . . . . . . . . . . . . . . . . . 220
LR9F7579 . . . . . . . . . . . . . . . . . . . . . 220
LR9F7581 . . . . . . . . . . . . . . . . . . . . . 220
LRD01 . . . . . . . . . . . . . . . . . . . . . . . . 177
LRD013 . . . . . . . . . . . . . . . . . . . . . . . .134
LRD02 . . . . . . . . . . . . . . . . . . . . . . . . 177
LRD023 . . . . . . . . . . . . . . . . . . . . . . . 134
LRD03 . . . . . . . . . . . . . . . . . . . . . . . . 177
LRD033 . . . . . . . . . . . . . . . . . . . . . . . 134
LRD04 . . . . . . . . . . . . . . . . . . . . . . . . 134
LRD043 . . . . . . . . . . . . . . . . . . . . . . . 134
LRD05 . . . . . . . . . . . . . . . . . . . . . . . . 177
LRD053 . . . . . . . . . . . . . . . . . . . . . . . 134
LRD06 . . . . . . . . . . . . . . . . . . . . . . . . 177
LRD063 . . . . . . . . . . . . . . . . . . . . . . . 134
LRD07 . . . . . . . . . . . . . . . . . . . . . . . . 177
LRD073 . . . . . . . . . . . . . . . . . . . . . . . 134
LRD08 . . . . . . . . . . . . . . . . . . . . . . . . 177
LRD083 . . . . . . . . . . . . . . . . . . . . . . . 134
LRD10 . . . . . . . . . . . . . . . . . . . . . . . . 177
LRD103 . . . . . . . . . . . . . . . . . . . . . . . 134
LRD12 . . . . . . . . . . . . . . . . . . . . . . . . 177
LRD123 . . . . . . . . . . . . . . . . . . . . . . . 134
LRD14 . . . . . . . . . . . . . . . . . . . . . . . . 134
LRD143 . . . . . . . . . . . . . . . . . . . . . . . 134
LRD1508 . . . . . . . . . . . . . . . . . . . . . . 177
LRD1510 . . . . . . . . . . . . . . . . . . . . . . 177
LRD1512 . . . . . . . . . . . . . . . . . . . . . . 177
LRD1514 . . . . . . . . . . . . . . . . . . . . . . 177
LRD1516 . . . . . . . . . . . . . . . . . . . . . . 177
LRD1521 . . . . . . . . . . . . . . . . . . . . . . 177
LRD1522 . . . . . . . . . . . . . . . . . . . . . . 177
LRD1530 . . . . . . . . . . . . . . . . . . . . . . 177
LRD1531 . . . . . . . . . . . . . . . . . . . . . . 177
LRD16 . . . . . . . . . . . . . . . . . . . . . . . . 177
LRD163 . . . . . . . . . . . . . . . . . . . . . . . . 134
LRD21 . . . . . . . . . . . . . . . . . . . . . . . . 177
LRD213 . . . . . . . . . . . . . . . . . . . . . . . . 134
LRD22 . . . . . . . . . . . . . . . . . . . . . . . . 177
LRD223 . . . . . . . . . . . . . . . . . . . . . . . . 134
LRD32 . . . . . . . . . . . . . . . . . . . . . . . . 177
LRD3301A66 . . . . . . . . . . . . . . . . . . . 177
LRD3302A66 . . . . . . . . . . . . . . . . . . . 177
LRD3303A66 . . . . . . . . . . . . . . . . . . . 177
LRD3304A66 . . . . . . . . . . . . . . . . . . . 177
LRD3305A66 . . . . . . . . . . . . . . . . . . . 177
LRD3306A66 . . . . . . . . . . . . . . . . . . . 177
LRD3307A66 . . . . . . . . . . . . . . . . . . . 177
LRD3308A66 . . . . . . . . . . . . . . . . . . . 177
LRD3310A66 . . . . . . . . . . . . . . . . . . . 177
LRD3312A66 . . . . . . . . . . . . . . . . . . . 177
LRD3314A66 . . . . . . . . . . . . . . . . . . . 177
LRD3316A66 . . . . . . . . . . . . . . . . . . . 177
LRD3321A66 . . . . . . . . . . . . . . . . . . . 177
LRD3322 . . . . . . . . . . . . . . . . . . . . . . 177
LRD3322A66 . . . . . . . . . . . . . . . . . . . 177
LRD3353 . . . . . . . . . . . . . . . . . . . . . 177
LRD3355 . . . . . . . . . . . . . . . . . . . . . 177
LRD3357 . . . . . . . . . . . . . . . . . . . . . 177
LRD3359 . . . . . . . . . . . . . . . . . . . . . 177
LRD3361 . . . . . . . . . . . . . . . . . . . . . 177
LRD3363 . . . . . . . . . . . . . . . . . . . . . 177
LRD3365 . . . . . . . . . . . . . . . . . . . . . . 177
LRD33X6A66 . . . . . . . . . . . . . . . . . . . 177
LRD35 . . . . . . . . . . . . . . . . . . . . . . . . 177
LRD3522 . . . . . . . . . . . . . . . . . . . . . . . 135
LRD4365 . . . . . . . . . . . . . . . . . . . . . . 177
LRD4367 . . . . . . . . . . . . . . . . . . . . . . 177
LRD4369 . . . . . . . . . . . . . . . . . . . . . . 177
LR9D5367 . . . . . . . . . . . . . . . . . . . . . . 135
LR9D5369 . . . . . . . . . . . . . . . . . . . . . . 135
LR9D5567 . . . . . . . . . . . . . . . . . . . . . . 135
LR9D5569 . . . . . . . . . . . . . . . . . . . . . . 135
LR9D67 . . . . . . . . . . . . . . . . . . . . . . . . 135
LR9D69 . . . . . . . . . . . . . . . . . . . . . . . . 135
LX0FF005 . . . . . . . . . . . . . . . . . . . . . . 234
LX0FF006 . . . . . . . . . . . . . . . . . . . . . . 234
LX0FF007 . . . . . . . . . . . . . . . . . . . . . . 234
LX0FF008 . . . . . . . . . . . . . . . . . . . . . . 234
LX0FF009 . . . . . . . . . . . . . . . . . . . . . . 234
LX0FF010 . . . . . . . . . . . . . . . . . . . . . . 234
LX0FF011 . . . . . . . . . . . . . . . . . . . . . . 234
LX0FF020 . . . . . . . . . . . . . . . . . . . . . . 234
LX0FF055 . . . . . . . . . . . . . . . . . . . . . . 235
LX0FF056 . . . . . . . . . . . . . . . . . . . . . . 235
LX0FF057 . . . . . . . . . . . . . . . . . . . . . . 235
LX0FF058 . . . . . . . . . . . . . . . . . . . . . . 235
LX0FF224 . . . . . . . . . . . . . . . . . . . . . . 235
LX0FG005 . . . . . . . . . . . . . . . . . . . . . 234
LX0FG006 . . . . . . . . . . . . . . . . . . . . . 234
LX0FG007 . . . . . . . . . . . . . . . . . . . . . 234
LX0FG008 . . . . . . . . . . . . . . . . . . . . . 234
LX0FG009 . . . . . . . . . . . . . . . . . . . . . 234
LX0FG010 . . . . . . . . . . . . . . . . . . . . . 234
LX0FG011 . . . . . . . . . . . . . . . . . . . . . 234
LX0FG020 . . . . . . . . . . . . . . . . . . . . . 234
LX0FG055 . . . . . . . . . . . . . . . . . . . . . 235
LX0FG056 . . . . . . . . . . . . . . . . . . . . . 235
LX0FG057 . . . . . . . . . . . . . . . . . . . . . 235
LX0FG058 . . . . . . . . . . . . . . . . . . . . . 235
LX0FG224 . . . . . . . . . . . . . . . . . . . . . 235
LX0FH005 . . . . . . . . . . . . . . . . . . . . . 234
LX0FH006 . . . . . . . . . . . . . . . . . . . . . 234
LX0FH007 . . . . . . . . . . . . . . . . . . . . . 234
LX0FH008 . . . . . . . . . . . . . . . . . . . . . 234
LX0FH009 . . . . . . . . . . . . . . . . . . . . . 234
LX0FH010 . . . . . . . . . . . . . . . . . . . . . 234
LX0FH011 . . . . . . . . . . . . . . . . . . . . . 234
LX0FH020 . . . . . . . . . . . . . . . . . . . . . 234
LX0FH055 . . . . . . . . . . . . . . . . . . . . . 235
LX0FH056 . . . . . . . . . . . . . . . . . . . . . 235
LX0FH057 . . . . . . . . . . . . . . . . . . . . . 235
LX0FH058 . . . . . . . . . . . . . . . . . . . . . 235
LX0FH224 . . . . . . . . . . . . . . . . . . . . . 235
LX0FJ005 . . . . . . . . . . . . . . . . . . . . . . 234
LX0FJ006 . . . . . . . . . . . . . . . . . . . . . . 234
LX0FJ007 . . . . . . . . . . . . . . . . . . . . . . 234
LX0FJ008 . . . . . . . . . . . . . . . . . . . . . 234
LX0FJ009 . . . . . . . . . . . . . . . . . . . . . 234
LX0FJ010 . . . . . . . . . . . . . . . . . . . . . 234
LX0FJ011 . . . . . . . . . . . . . . . . . . . . . 234
LX0FJ020 . . . . . . . . . . . . . . . . . . . . . 234
LX0FJ055 . . . . . . . . . . . . . . . . . . . . . 235
LX0FJ056 . . . . . . . . . . . . . . . . . . . . . 235
LX0FJ057 . . . . . . . . . . . . . . . . . . . . . 235
LX0FJ058 . . . . . . . . . . . . . . . . . . . . . 235
LX0FJ224 . . . . . . . . . . . . . . . . . . . . . 235
LX0FK005 . . . . . . . . . . . . . . . . . . . . . 234
LX0FK006 . . . . . . . . . . . . . . . . . . . . . 234
LX0FK007 . . . . . . . . . . . . . . . . . . . . . 234
LX0FK008 . . . . . . . . . . . . . . . . . . . . . 234
LX0FK009 . . . . . . . . . . . . . . . . . . . . . 234
LX0FK010 . . . . . . . . . . . . . . . . . . . . . 234
LX0FK011 . . . . . . . . . . . . . . . . . . . . . 234
LX0FK020 . . . . . . . . . . . . . . . . . . . . . 234
LX0FK055 . . . . . . . . . . . . . . . . . . . . . 235
LX0FK056 . . . . . . . . . . . . . . . . . . . . . 235
LX0FK057 . . . . . . . . . . . . . . . . . . . . . 235
LX0FK058 . . . . . . . . . . . . . . . . . . . . . 235
LX0FK224 . . . . . . . . . . . . . . . . . . . . . 235
LX0FL005 . . . . . . . . . . . . . . . . . . . . . 234
LX0FL006 . . . . . . . . . . . . . . . . . . . . . 234
LX0FL007 . . . . . . . . . . . . . . . . . . . . . 234
LX0FL008 . . . . . . . . . . . . . . . . . . . . . 234
LX0FL009 . . . . . . . . . . . . . . . . . . . . . 234
LX0FL010 . . . . . . . . . . . . . . . . . . . . . 234
LX0FL011 . . . . . . . . . . . . . . . . . . . . . 234
LX0FL020 . . . . . . . . . . . . . . . . . . . . . 234
LX0FL055 . . . . . . . . . . . . . . . . . . . . . 235
LX0FL056 . . . . . . . . . . . . . . . . . . . . . 235
LX0FL057 . . . . . . . . . . . . . . . . . . . . . 235
LX0FL058 . . . . . . . . . . . . . . . . . . . . . 235
LX0FL224 . . . . . . . . . . . . . . . . . . . . . 235
LX1D6B5 . . . . . . . . . . . . . . . . . . . . . . 118
LX1D6B6 . . . . . . . . . . . . . . . . . . . . . . 118
LX1D6B7 . . . . . . . . . . . . . . . . . . . . . . 118
LX1D6C5 . . . . . . . . . . . . . . . . . . . . . . 118
LX1D6D5 . . . . . . . . . . . . . . . . . . . . . . 118
LX1D6D7 . . . . . . . . . . . . . . . . . . . . . . 118
LX1D6E5 . . . . . . . . . . . . . . . . . . . . . . 118
LX1D6E6 . . . . . . . . . . . . . . . . . . . . . . 118
LX1D6E7 . . . . . . . . . . . . . . . . . . . . . . 118
LX1D6F5 . . . . . . . . . . . . . . . . . . . . . . 118
LX1D6F6 . . . . . . . . . . . . . . . . . . . . . . 118
LX1D6F7 . . . . . . . . . . . . . . . . . . . . . . 118
LX1D6FE5 . . . . . . . . . . . . . . . . . . . . . 118
LX1D6FE7 . . . . . . . . . . . . . . . . . . . . . 118
LX1D6G5 . . . . . . . . . . . . . . . . . . . . . 118
LX1D6G6 . . . . . . . . . . . . . . . . . . . . . 118
LX1D6G7 . . . . . . . . . . . . . . . . . . . . . 118
LX1D6L6 . . . . . . . . . . . . . . . . . . . . . . 118
LX1D6M5 . . . . . . . . . . . . . . . . . . . . . 118
LX1D6M6 . . . . . . . . . . . . . . . . . . . . . 118
LX1D6M7 . . . . . . . . . . . . . . . . . . . . . 118
LX1D6N5 . . . . . . . . . . . . . . . . . . . . . . 118
LX1D6N7 . . . . . . . . . . . . . . . . . . . . . . 118
LX1D6P5 . . . . . . . . . . . . . . . . . . . . . . 118
LX1D6P7 . . . . . . . . . . . . . . . . . . . . . . 118
LX1D6Q5 . . . . . . . . . . . . . . . . . . . . . 118
LX1D6Q6 . . . . . . . . . . . . . . . . . . . . . 118
LX1D6Q7 . . . . . . . . . . . . . . . . . . . . . 118
LX1D6R5 . . . . . . . . . . . . . . . . . . . . . . 118
LX1D6R6 . . . . . . . . . . . . . . . . . . . . . . 118
LX1D6R7 . . . . . . . . . . . . . . . . . . . . . . 118
LX1D6S5 . . . . . . . . . . . . . . . . . . . . . . 118
LX1D6S6 . . . . . . . . . . . . . . . . . . . . . . 118
LX1D6T6 . . . . . . . . . . . . . . . . . . . . . . 118
LX1D6U5 . . . . . . . . . . . . . . . . . . . . . . 118
LX1D6U6 . . . . . . . . . . . . . . . . . . . . . . 118
LX1D6U7 . . . . . . . . . . . . . . . . . . . . . . 118
LX1D6V5 . . . . . . . . . . . . . . . . . . . . . . 118
LX1D6V7 . . . . . . . . . . . . . . . . . . . . . . 118
LX1D6W5 . . . . . . . . . . . . . . . . . . . . . 118
LX1D6W6 . . . . . . . . . . . . . . . . . . . . . 118
LX1D6X6 . . . . . . . . . . . . . . . . . . . . . . 118
LX1D6Y5 . . . . . . . . . . . . . . . . . . . . . . 118
LX1D8B5 . . . . . . . . . . . . . . . . . . . . . . 119
LX1D8B6 . . . . . . . . . . . . . . . . . . . . . . 119
LX1D8B7 . . . . . . . . . . . . . . . . . . . . . . 119
LX1D8C5 . . . . . . . . . . . . . . . . . . . . . . 119
LX1D8C7 . . . . . . . . . . . . . . . . . . . . . . 119
LX1D8D5 . . . . . . . . . . . . . . . . . . . . . . 119
LX1D8D7 . . . . . . . . . . . . . . . . . . . . . . 119
LX1D8E5 . . . . . . . . . . . . . . . . . . . . . . 119
LX1D8E6 . . . . . . . . . . . . . . . . . . . . . . 119
LX1D8E7 . . . . . . . . . . . . . . . . . . . . . . 119
LX1D8F5 . . . . . . . . . . . . . . . . . . . . . . 119
LX1D8F6 . . . . . . . . . . . . . . . . . . . . . . 119
LX1D8F7 . . . . . . . . . . . . . . . . . . . . . . 119
LX1D8FC5 . . . . . . . . . . . . . . . . . . . . . 119
LX1D8FC7 . . . . . . . . . . . . . . . . . . . . . 119
LX1D8FE5 . . . . . . . . . . . . . . . . . . . . . 119
LX1D8FE7 . . . . . . . . . . . . . . . . . . . . . 119
LX1D8G6 . . . . . . . . . . . . . . . . . . . . . . 119
LX1D8G7 . . . . . . . . . . . . . . . . . . . . . . 119
LX1D8L6 . . . . . . . . . . . . . . . . . . . . . . 119
LX1D8LE7 . . . . . . . . . . . . . . . . . . . . . 119
LX1D8M5 . . . . . . . . . . . . . . . . . . . . . . 119
LX1D8M6 . . . . . . . . . . . . . . . . . . . . . . 119
LX1D8M7 . . . . . . . . . . . . . . . . . . . . . . 119
LX1D8N5 . . . . . . . . . . . . . . . . . . . . . . 119
LX1D8N7 . . . . . . . . . . . . . . . . . . . . . . 119
LX1D8P5 . . . . . . . . . . . . . . . . . . . . . . 119
LX1D8P7 . . . . . . . . . . . . . . . . . . . . . . 119
LX1D8Q5 . . . . . . . . . . . . . . . . . . . . . . 119
LX1D8Q6 . . . . . . . . . . . . . . . . . . . . . . 119
LX1D8Q7 . . . . . . . . . . . . . . . . . . . . . . 119
LX1D8R5 . . . . . . . . . . . . . . . . . . . . . . 119
LX1D8R6 . . . . . . . . . . . . . . . . . . . . . . 119
LX1D8R7 . . . . . . . . . . . . . . . . . . . . . . 119
LX1D8S5 . . . . . . . . . . . . . . . . . . . . . . 119
LX1D8S7 . . . . . . . . . . . . . . . . . . . . . . 119
LX1D8T6 . . . . . . . . . . . . . . . . . . . . . . 119
LX1D8T7 . . . . . . . . . . . . . . . . . . . . . . 119
LX1D8U5 . . . . . . . . . . . . . . . . . . . . . . 119
LX1D8U6 . . . . . . . . . . . . . . . . . . . . . . 119
LX1D8U7 . . . . . . . . . . . . . . . . . . . . . . 119
LX1D8UE7 . . . . . . . . . . . . . . . . . . . . . 119
LX1D8V5 . . . . . . . . . . . . . . . . . . . . . . 119
LX1D8V7 . . . . . . . . . . . . . . . . . . . . . . 119
LX1D8W6 . . . . . . . . . . . . . . . . . . . . . . 119
LX1FF024 . . . . . . . . . . . . . . . . . . . . . 202
LX1FF040 . . . . . . . . . . . . . . . . . . . . . 202
LX1FF042 . . . . . . . . . . . . . . . . . . . . . 202
LX1FF048 . . . . . . . . . . . . . . . . . . . . . 202
LX1FF092 . . . . . . . . . . . . . . . . . . . . . 202
LX1FF095 . . . . . . . . . . . . . . . . . . . . . 202
LX1FF1000 . . . . . . . . . . . . . . . . . . . . 202
LX1FF110 . . . . . . . . . . . . . . . . . . . . . 202
LX1FF127 . . . . . . . . . . . . . . . . . . . . . 202
LX1FF162 . . . . . . . . . . . . . . . . . . . . . 202
LX1FF184 . . . . . . . . . . . . . . . . . . . . . 202
LX1FF187 . . . . . . . . . . . . . . . . . . . . . 202
LX1FF220 . . . . . . . . . . . . . . . . . . . . . 202
LX1FF240 . . . . . . . . . . . . . . . . . . . . . 202
LX1FF316 . . . . . . . . . . . . . . . . . . . . . 202
LX1FF340 . . . . . . . . . . . . . . . . . . . . . 202
LX1FF360 . . . . . . . . . . . . . . . . . . . . . 202
LX1FF380 . . . . . . . . . . . . . . . . . . . . . 202
LX1FF415 . . . . . . . . . . . . . . . . . . . . . 202
LX1FF500 . . . . . . . . . . . . . . . . . . . . . 202
LX1FF550 . . . . . . . . . . . . . . . . . . . . . 202
LX1FF660 . . . . . . . . . . . . . . . . . . . . . 202
LX1FF850 . . . . . . . . . . . . . . . . . . . . . 202
LX1FG024 . . . . . . . . . . . . . . . . . . . . . 202
LX1FG040 . . . . . . . . . . . . . . . . . . . . . 202
LX1FG042 . . . . . . . . . . . . . . . . . . . . . 202
LX1FG048 . . . . . . . . . . . . . . . . . . . . . 202
LX1FG092 . . . . . . . . . . . . . . . . . . . . . 202
LX1FG095 . . . . . . . . . . . . . . . . . . . . . 202
LX1FG1000 . . . . . . . . . . . . . . . . . . . . 202
LX1FG110 . . . . . . . . . . . . . . . . . . . . . 202
LX1FG127 . . . . . . . . . . . . . . . . . . . . . 202
LX1FG162 . . . . . . . . . . . . . . . . . . . . . 202
LX1FG184 . . . . . . . . . . . . . . . . . . . . . 202
LX1FG187 . . . . . . . . . . . . . . . . . . . . . 202
LX1FG220 . . . . . . . . . . . . . . . . . . . . . 202
LX1FG240 . . . . . . . . . . . . . . . . . . . . . 202
LX1FG316 . . . . . . . . . . . . . . . . . . . . . 202
LX1FG340 . . . . . . . . . . . . . . . . . . . . . 202
LX1FG360 . . . . . . . . . . . . . . . . . . . . . 202
LX1FG380 . . . . . . . . . . . . . . . . . . . . . 202
LX1FG415 . . . . . . . . . . . . . . . . . . . . . 202
LX1FG500 . . . . . . . . . . . . . . . . . . . . . 202
LX1FG550 . . . . . . . . . . . . . . . . . . . . . 202
LX1FG660 . . . . . . . . . . . . . . . . . . . . . 202
LX1FG850 . . . . . . . . . . . . . . . . . . . . . 202
LX1FH0482 . . . . . . . . . . . . . . . . . . . . 203
LX1FH10002 . . . . . . . . . . . . . . . . . . . 203
LX1FH1102 . . . . . . . . . . . . . . . . . . . . 203
LX1FH1272 . . . . . . . . . . . . . . . . . . . . 203
LX1FH2002 . . . . . . . . . . . . . . . . . . . . 203
LX1FH2202 . . . . . . . . . . . . . . . . . . . . 203
LX1FH2402 . . . . . . . . . . . . . . . . . . . . 203
LX1FH2772 . . . . . . . . . . . . . . . . . . . . 203
LX1FH3802 . . . . . . . . . . . . . . . . . . . . 203
LX1FH5002 . . . . . . . . . . . . . . . . . . . . 203
LX1FH6002 . . . . . . . . . . . . . . . . . . . . 203
LX1FJ048 . . . . . . . . . . . . . . . . . . . . . . 203
250
© 2001-2004 Schneider Electric All Rights Reserved
01/04
Catalog Number Index
LX1FJ1000 . . . . . . . . . . . . . . . . . . . . 203
LX1FJ110 . . . . . . . . . . . . . . . . . . . . . 203
LX1FJ127 . . . . . . . . . . . . . . . . . . . . . 203
LX1FJ200 . . . . . . . . . . . . . . . . . . . . . 203
LX1FJ220 . . . . . . . . . . . . . . . . . . . . . 203
LX1FJ240 . . . . . . . . . . . . . . . . . . . . . 203
LX1FJ280 . . . . . . . . . . . . . . . . . . . . . 203
LX1FJ380 . . . . . . . . . . . . . . . . . . . . . 203
LX1FJ415 . . . . . . . . . . . . . . . . . . . . . 203
LX1FJ500 . . . . . . . . . . . . . . . . . . . . . 203
LX1FJ600 . . . . . . . . . . . . . . . . . . . . . 203
LX1FK048 . . . . . . . . . . . . . . . . . . . . . 203
LX1FK1000 . . . . . . . . . . . . . . . . . . . . 203
LX1FK110 . . . . . . . . . . . . . . . . . . . . . 203
LX1FK127 . . . . . . . . . . . . . . . . . . . . . 203
LX1FK200 . . . . . . . . . . . . . . . . . . . . . 203
LX1FK220 . . . . . . . . . . . . . . . . . . . . . 203
LX1FK240 . . . . . . . . . . . . . . . . . . . . . 203
LX1FK280 . . . . . . . . . . . . . . . . . . . . . 203
LX1FK380 . . . . . . . . . . . . . . . . . . . . . 203
LX1FK415 . . . . . . . . . . . . . . . . . . . . . 203
LX1FK500 . . . . . . . . . . . . . . . . . . . . . 203
LX1FK600 . . . . . . . . . . . . . . . . . . . . . 203
LX1FL048 . . . . . . . . . . . . . . . . . . . . . 204
LX1FL1000 . . . . . . . . . . . . . . . . . . . . 204
LX1FL110 . . . . . . . . . . . . . . . . . . . . . 204
LX1FL127 . . . . . . . . . . . . . . . . . . . . . 204
LX1FL200 . . . . . . . . . . . . . . . . . . . . . 204
LX1FL220 . . . . . . . . . . . . . . . . . . . . . 204
LX1FL260 . . . . . . . . . . . . . . . . . . . . . 204
LX1FL380 . . . . . . . . . . . . . . . . . . . . . 204
LX1FL415 . . . . . . . . . . . . . . . . . . . . . 204
LX1FL500 . . . . . . . . . . . . . . . . . . . . . 204
LX1FL600 . . . . . . . . . . . . . . . . . . . . . 204
LX1FX110 . . . . . . . . . . . . . . . . . . . . . 204
LX1FX127 . . . . . . . . . . . . . . . . . . . . . 204
LX1FX200 . . . . . . . . . . . . . . . . . . . . . 204
LX1FX220 . . . . . . . . . . . . . . . . . . . . . 204
LX1FX280 . . . . . . . . . . . . . . . . . . . . . 204
LX1FX380 . . . . . . . . . . . . . . . . . . . . . 204
LX1FX415 . . . . . . . . . . . . . . . . . . . . . 204
LX1FX500 . . . . . . . . . . . . . . . . . . . . . 204
LX4D6BD . . . . . . . . . . . . . . . . . . . . . 120
LX4D6BW . . . . . . . . . . . . . . . . . . . . . 121
LX4D6CD . . . . . . . . . . . . . . . . . . . . . 120
LX4D6CW . . . . . . . . . . . . . . . . . . . . . 121
LX4D6ED . . . . . . . . . . . . . . . . . . . . . 120
LX4D6EW . . . . . . . . . . . . . . . . . . . . . 121
LX4D6FD . . . . . . . . . . . . . . . . . . . . . 120
LX4D6FW . . . . . . . . . . . . . . . . . . . . . 121
LX4D6GD . . . . . . . . . . . . . . . . . . . . . 120
LX4D6JD . . . . . . . . . . . . . . . . . . . . . . 120
LX4D6JW . . . . . . . . . . . . . . . . . . . . . 121
LX4D6MD . . . . . . . . . . . . . . . . . . . . . 120
LX4D6MW . . . . . . . . . . . . . . . . . . . . . 121
LX4D6ND . . . . . . . . . . . . . . . . . . . . . 120
LX4D6RD . . . . . . . . . . . . . . . . . . . . . 120
LX4D6SD . . . . . . . . . . . . . . . . . . . . . 120
LX4D6SW . . . . . . . . . . . . . . . . . . . . . 121
LX4D6UD . . . . . . . . . . . . . . . . . . . . . 120
LX4D7BD . . . . . . . . . . . . . . . . . . . . . 120
LX4D7BW . . . . . . . . . . . . . . . . . . . . . 121
LX4D7CD . . . . . . . . . . . . . . . . . . . . . 120
LX4D7CW . . . . . . . . . . . . . . . . . . . . . 121
LX4D7ED . . . . . . . . . . . . . . . . . . . . . 120
LX4D7EW . . . . . . . . . . . . . . . . . . . . . 121
LX4D7FD . . . . . . . . . . . . . . . . . . . . . 120
LX4D7FW . . . . . . . . . . . . . . . . . . . . . 121
LX4D7GD . . . . . . . . . . . . . . . . . . . . . 120
LX4D7JD . . . . . . . . . . . . . . . . . . . . . . 120
LX4D7JW . . . . . . . . . . . . . . . . . . . . . 121
LX4D7MD . . . . . . . . . . . . . . . . . . . . . 120
LX4D7MW . . . . . . . . . . . . . . . . . . . . . 121
LX4D7ND . . . . . . . . . . . . . . . . . . . . . 120
LX4D7RD . . . . . . . . . . . . . . . . . . . . . 120
LX4D7SD . . . . . . . . . . . . . . . . . . . . . 120
LX4D7SW . . . . . . . . . . . . . . . . . . . . . 121
LX4D7UD . . . . . . . . . . . . . . . . . . . . . 120
LX4D8BD . . . . . . . . . . . . . . . . . . . . . 121
LX4D8ED . . . . . . . . . . . . . . . . . . . . . 121
LX4D8FD . . . . . . . . . . . . . . . . . . . . . 121
LX4D8GD . . . . . . . . . . . . . . . . . . . . . 121
LX4D8MD . . . . . . . . . . . . . . . . . . . . . 121
LX4D8ND . . . . . . . . . . . . . . . . . . . . . 121
LX4D8RD . . . . . . . . . . . . . . . . . . . . . 121
LX4D8SD . . . . . . . . . . . . . . . . . . . . . 121
LX4D8UD . . . . . . . . . . . . . . . . . . . . . 121
LX4F8FW . . . . . . . . . . . . . . . . . 204, 206
LX4F8MW . . . . . . . . . . . . . . . . . 204, 206
LX4F8QW . . . . . . . . . . . . . . . . . 204, 206
LX4FF024 . . . . . . . . . . . . . . . . . . . . . 205
LX4FF048 . . . . . . . . . . . . . . . . . . . . . 205
LX4FF110 . . . . . . . . . . . . . . . . . . . . . 205
LX4FF125 . . . . . . . . . . . . . . . . . . . . . 205
LX4FF220 . . . . . . . . . . . . . . . . . . . . . 205
LX4FF250 . . . . . . . . . . . . . . . . . . . . . 205
LX4FF440 . . . . . . . . . . . . . . . . . . . . . 205
LX4FG024 . . . . . . . . . . . . . . . . . . . . . 205
LX4FG048 . . . . . . . . . . . . . . . . . . . . . 205
LX4FG110 . . . . . . . . . . . . . . . . . . . . . 205
LX4FG125 . . . . . . . . . . . . . . . . . . . . . 205
LX4FG220 . . . . . . . . . . . . . . . . . . . . . 205
LX4FG250 . . . . . . . . . . . . . . . . . . . . . 205
LX4FG440 . . . . . . . . . . . . . . . . . . . . . 205
LX4FH024 . . . . . . . . . . . . . . . . . . . . . 205
LX4FH048 . . . . . . . . . . . . . . . . . . . . . 205
LX4FH110 . . . . . . . . . . . . . . . . . . . . . 205
LX4FH125 . . . . . . . . . . . . . . . . . . . . . 205
LX4FH220 . . . . . . . . . . . . . . . . . . . . . 205
LX4FH250 . . . . . . . . . . . . . . . . . . . . . 205
LX4FH440 . . . . . . . . . . . . . . . . . . . . . 205
LX4FJ048 . . . . . . . . . . . . . . . . . . . . . 205
LX4FJ110 . . . . . . . . . . . . . . . . . . . . . 205
LX4FJ125 . . . . . . . . . . . . . . . . . . . . . 205
LX4FJ220 . . . . . . . . . . . . . . . . . . . . . 205
LX4FJ250 . . . . . . . . . . . . . . . . . . . . . 205
LX4FJ440 . . . . . . . . . . . . . . . . . . . . . 205
LX4FK048 . . . . . . . . . . . . . . . . . . . . . 206
LX4FK110 . . . . . . . . . . . . . . . . . . . . . 206
LX4FK125 . . . . . . . . . . . . . . . . . . . . . 206
LX4FK220 . . . . . . . . . . . . . . . . . . . . . 206
LX4FK250 . . . . . . . . . . . . . . . . . . . . . 206
LX4FK440 . . . . . . . . . . . . . . . . . . . . . 206
LX4FL048 . . . . . . . . . . . . . . . . . . . . . 206
LX4FL110 . . . . . . . . . . . . . . . . . . . . . 206
LX4FL125 . . . . . . . . . . . . . . . . . . . . . 206
LX4FL220 . . . . . . . . . . . . . . . . . . . . . 206
LX4FL250 . . . . . . . . . . . . . . . . . . . . . 206
LX4FL440 . . . . . . . . . . . . . . . . . . . . . 206
LX4FX110 . . . . . . . . . . . . . . . . . . . . . 206
LX4FX125 . . . . . . . . . . . . . . . . . . . . . 206
LX4FX220 . . . . . . . . . . . . . . . . . . . . . 206
LX4FX250 . . . . . . . . . . . . . . . . . . . . . 206
LX4FX440 . . . . . . . . . . . . . . . . . . . . . 206
LX9FF048 . . . . . . . . . . . . . . . . . . . . . 207
LX9FF110 . . . . . . . . . . . . . . . . . . . . . 207
LX9FF127 . . . . . . . . . . . . . . . . . . . . . 207
LX9FF220 . . . . . . . . . . . . . . . . . . . . . 207
LX9FF240 . . . . . . . . . . . . . . . . . . . . . 207
LX9FF380 . . . . . . . . . . . . . . . . . . . . . 207
LX9FF415 . . . . . . . . . . . . . . . . . . . . . 207
LX9FF500 . . . . . . . . . . . . . . . . . . . . . 207
LX9FG048 . . . . . . . . . . . . . . . . . . . . . 207
LX9FG110 . . . . . . . . . . . . . . . . . . . . . 207
LX9FG127 . . . . . . . . . . . . . . . . . . . . . 207
LX9FG220 . . . . . . . . . . . . . . . . . . . . . 207
LX9FG240 . . . . . . . . . . . . . . . . . . . . . 207
LX9FG380 . . . . . . . . . . . . . . . . . . . . . 207
LX9FG415 . . . . . . . . . . . . . . . . . . . . . 207
LX9FG500 . . . . . . . . . . . . . . . . . . . . . 207
LX9FH0482 . . . . . . . . . . . . . . . . . . . . 207
LX9FH1102 . . . . . . . . . . . . . . . . . . . . 207
LX9FH1272 . . . . . . . . . . . . . . . . . . . . 207
LX9FH2202 . . . . . . . . . . . . . . . . . . . . 207
LX9FH3802 . . . . . . . . . . . . . . . . . . . . 207
LX9FH5002 . . . . . . . . . . . . . . . . . . . . 207
LX9FJ917 . . . . . . . . . . . . . . . . . . . . . 208
LX9FJ918 . . . . . . . . . . . . . . . . . . . . . 209
LX9FJ925 . . . . . . . . . . . . . . . . . . . . . 208
LX9FJ926 . . . . . . . . . . . . . . . . . 208, 209
LX9FJ927 . . . . . . . . . . . . . . . . . . . . . 209
LX9FJ931 . . . . . . . . . . . . . . . . . . . . . 208
LX9FJ932 . . . . . . . . . . . . . . . . . . . . . 209
LX9FJ936 . . . . . . . . . . . . . . . . . . . . . 208
LX9FJ937 . . . . . . . . . . . . . . . . . . . . . 208
LX9FJ938 . . . . . . . . . . . . . . . . . 208, 209
LX9FK917 . . . . . . . . . . . . . . . . . . . . . 208
LX9FK918 . . . . . . . . . . . . . . . . . . . . . 209
LX9FK925 . . . . . . . . . . . . . . . . . . . . . 208
LX9FK926 . . . . . . . . . . . . . . . . . 208, 209
LX9FK927 . . . . . . . . . . . . . . . . . . . . . 209
LX9FK931 . . . . . . . . . . . . . . . . . . . . . 208
LX9FK932 . . . . . . . . . . . . . . . . . . . . . 209
LX9FK936 . . . . . . . . . . . . . . . . . . . . . 208
LX9FK937 . . . . . . . . . . . . . . . . . . . . . 208
LX9FK938 . . . . . . . . . . . . . . . . . 208, 209
LX9FL917 . . . . . . . . . . . . . . . . . . . . . 208
LX9FL918 . . . . . . . . . . . . . . . . . . . . . 209
LX9FL924 . . . . . . . . . . . . . . . . . . . . . 208
LX9FL925 . . . . . . . . . . . . . . . . . . . . . 209
LX9FL926 . . . . . . . . . . . . . . . . . 208, 209
LX9FL930 . . . . . . . . . . . . . . . . . . . . . 208
LX9FL931 . . . . . . . . . . . . . . . . . . 208, 209
LX9FL935 . . . . . . . . . . . . . . . . . . . . . . 208
LX9FL936 . . . . . . . . . . . . . . . . . . . . . . 208
LX9FL937 . . . . . . . . . . . . . . . . . . . . . . 209
LX9FL938 . . . . . . . . . . . . . . . . . . . . . . 208
LXD1B7 . . . . . . . . . . . . . . . . . . . . . . . 117
LXD1C7 . . . . . . . . . . . . . . . . . . . . . . . 117
LXD1CC7 . . . . . . . . . . . . . . . . . . . . . . 117
LXD1D7 . . . . . . . . . . . . . . . . . . . . . . . 117
LXD1E7 . . . . . . . . . . . . . . . . . . . . . . . 117
LXD1EE7 . . . . . . . . . . . . . . . . . . . . . . 117
LXD1F7 . . . . . . . . . . . . . . . . . . . . . . . 117
LXD1FC7 . . . . . . . . . . . . . . . . . . . . . . 117
LXD1FE7 . . . . . . . . . . . . . . . . . . . . . . 117
LXD1G7 . . . . . . . . . . . . . . . . . . . . . . . 117
LXD1J7 . . . . . . . . . . . . . . . . . . . . . . . 117
LXD1K7 . . . . . . . . . . . . . . . . . . . . . . . 117
LXD1L7 . . . . . . . . . . . . . . . . . . . . . . . 117
LXD1LE7 . . . . . . . . . . . . . . . . . . . . . . 117
LXD1M7 . . . . . . . . . . . . . . . . . . . . . . . 117
LXD1N7 . . . . . . . . . . . . . . . . . . . . . . . 117
LXD1P7 . . . . . . . . . . . . . . . . . . . . . . . 117
LXD1Q7 . . . . . . . . . . . . . . . . . . . . . . . 117
LXD1R7 . . . . . . . . . . . . . . . . . . . . . . . 117
LXD1SC7 . . . . . . . . . . . . . . . . . . . . . . 117
LXD1T7 . . . . . . . . . . . . . . . . . . . . . . . 117
LXD1U7 . . . . . . . . . . . . . . . . . . . . . . . 117
LXD1V7 . . . . . . . . . . . . . . . . . . . . . . . 117
LXD1W7 . . . . . . . . . . . . . . . . . . . . . . . 117
LXD1X7 . . . . . . . . . . . . . . . . . . . . . . . 117
LXD1Y7 . . . . . . . . . . . . . . . . . . . . . . . 117
LXD1Z7 . . . . . . . . . . . . . . . . . . . . . . . 117
P
PA1LB50 . . . . . . . . . . . . . . . . . . . . . . . 238
PA1LB75 . . . . . . . . . . . . . . . . . . . . . . . 238
PA1LB76 . . . . . . . . . . . . . . . . . . . . . . . 238
PA1LB80 . . . . . . . . . . . . . . . . . . . . . . . 238
PA1LB89 . . . . . . . . . . . . . . . . . . . . . . . 238
PA1PB50 . . . . . . . . . . . . . . . . . . . . . . 238
PA1RB50 . . . . . . . . . . . . . . . . . . . . . . 238
PN1FB50 . . . . . . . . . . . . . . . . . . . . . . 238
PR4FB00 . . . . . . . . . . . . . . . . . . . . . . 238
PR4FB0004 . . . . . . . . . . . . . . . . . . . . 237
PR4FB0005 . . . . . . . . . . . . . . . . . . . . 237
PR4FB0006 . . . . . . . . . . . . . . . . . . . . 237
PR4FB0007 . . . . . . . . . . . . . . . . . . . . 237
PR4FB0008 . . . . . . . . . . . . . . . . . . . . 237
PR4FB0009 . . . . . . . . . . . . . . . . . . . . 237
PR4FB0010 . . . . . . . . . . . . . . . . . . . . 237
PR4FB0011 . . . . . . . . . . . . . . . . . . . . 237
PR4FB0012 . . . . . . . . . . . . . . . . . . . . 237
PR4FB0014 . . . . . . . . . . . . . . . . . . . . 237
W
WB1KB121 . . . . . . . . . . . . . . . . . . . . . 236
WB1KB122 . . . . . . . . . . . . . . . . . . . . . 236
WB1KB123 . . . . . . . . . . . . . . . . . . . . . 236
WB1KB124 . . . . . . . . . . . . . . . . . . . . . 236
WB1KB125 . . . . . . . . . . . . . . . . . . . . . 236
WB1KB126 . . . . . . . . . . . . . . . . . . . . . 236
WB1KB132 . . . . . . . . . . . . . . . . . . . . . 236
WB1KB133 . . . . . . . . . . . . . . . . . . . . . 236
WB1KB134 . . . . . . . . . . . . . . . . . . . . . 236
WB1KB135 . . . . . . . . . . . . . . . . . . . . . 236
WB1KB136 . . . . . . . . . . . . . . . . . . . . . 236
WB1KB137 . . . . . . . . . . . . . . . . . . . . . 236
WB1KB138 . . . . . . . . . . . . . . . . . . . . . 236
WB1KB139 . . . . . . . . . . . . . . . . . . . . . 236
WB1KB140 . . . . . . . . . . . . . . . . . . . . . 236
W816366180111. . . . . . . . . . . . . . . . . 137
X
XBY1U . . . . . . . . . . . . . . . . . . . . . . . . 114
XB5AL84101. . . . . . . . . . . . . . . . . . . . 137
XB5AA86102. . . . . . . . . . . . . . . . . . . . 137
Z
ZA2BA8602 . . . . . . . . . . . . . . . . . . . . 221
ZA2BZ13 . . . . . . . . . . . . . . . . . . . . . . 221
ZB5AA0. . . . . . . . . . . . . . . . . . . . . . . . 165
ZB5AA331. . . . . . . . . . . . . . . . . . . . . . 165
ZB5AL432 . . . . . . . . . . . . . . . . . . . . . . 165
ZB5A639 . . . . . . . . . . . . . . . . . . . . . . . 165
ZB5AD2. . . . . . . . . . . . . . . . . . . . . . . . 165
ZB5AD3. . . . . . . . . . . . . . . . . . . . . . . . 165
ZB5AD5. . . . . . . . . . . . . . . . . . . . . . . . 165
ZC4GM1 . . . . . . . . . . . . . . . . . . . . . . . 238
ZC4GM2 . . . . . . . . . . . . . . . . . . . 237, 238
ZC4GM8 . . . . . . . . . . . . . . . . . . . 237, 238
ZC4GM9 . . . . . . . . . . . . . . . . . . . . . . . 238
251
© 2001-2004 Schneider Electric All Rights Reserved
01/04
Schneider Electric
8001 Highway 64 East
Knightdale, NC 27545
1-888-SquareD
Schneider Canada Inc.
19 Waterman Avenue,
M4B 1 Y2
Toronto, Ontario
(1-888-778-2733)
www.SquareD.com
1-800-565-6699
www.schneider-electric.ca
Catalog No. 8502CT9901R5/03 January 2004 © 2001-2004 Schneider Electric All Rights Reserved
Replaces 8502CT9901R9/02 dated 11/02.
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明