LED60W-024 [ETC]

Switch Mode LED Drivers;


型号：	LED60W-024
厂家：	ETC
描述：	Switch Mode LED Drivers
文件：	总4页 (文件大小：727K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

LED-60W Series– Fixed Output and Dimmable

Switch Mode LED Drivers

Constant Current & Constant Voltage with Isolation

Black Magic Thermal Advantage™ Aluminum Housing

Electrical Speciﬁcations

Input Voltage Range:

Input Over-Voltage:

Frequency:

100-277 Vac Nom. (90-305 V Min/Max)

Can endure 320Vac for 48 Hrs, 350Vac for 2 Hrs

50/60 Hz Nom. (47-63 Hz Min/Max)

>0.90 @ full load, 100V through 277V

<30.0 Amps max @ 230 Vac, cold start 25ºC

0.90 Amps max

Power Factor:

Inrush Current:

Input Current:

Maximum Power:

Current Accuracy:

Load Regulation:

THD:

60W

± 1% Over input line variation

± 3%

<_ 20% @ full load

• Total Power: 60 Watts

Leakage Current:

Hold Up Time:

Protection:

400 µA Typical

• Input Voltage: 100-277 Vac Nom.

• UL Dry & Damp Location Rated

• IP66

Half Cycle

Output Over-Voltage, Output Over-Current, and

Output Short Circuit Protection reset by power cycling

• High Power Factor

• UL8750, CSA 22.2, EN61347, EN61000-3-2,

EN61000-3-3 Class C

• UL Sign Components Manual (S.A.M. Models)

Environmental Speciﬁcations

Minimum Starting Temp: -30ºC

Constant Current - Product Speciﬁcations

Maximum Case Temp.

Storage Temperature:

Humidity:

90°C

Output Current Output Voltage Max. Output

Typical

Model Number

(mA ±3%)

Range (Vdc)

56-170

44-134

28-86

19-58

16-48

14-43

12-36

9-27

Power (W)

59.5

Efﬁciency

92%

91%

90%

89%

88%

87%

-40ºC to +85ºC

5% to 95%

LED60W-170-C0350-XX

LED60W-134-C0450-XX

LED60W-086-C0700-XX

LED60W-058-C1050-XX

LED60W-048-C1250-XX

LED60W-043-C1400-XX

LED60W-036-C1670-XX

LED60W-027-C2300-XX

LED60W-024-C2500-XX

LED60W-022-C2720-XX

LED60W-020-C3000-XX

LED60W-018-C3330-XX

LED60W-015-C4000-XX

LED60W-012-C5000-XX

350

450

Cooling:

Convection

5 to 55 Hz/2g, 30 minutes

Class A

700

Vibration Frequency:

Sound Rating:

MTBF:

1050

1250

1400

1670

2300

2500

2720

3000

3330

4000

5000

418,000 Hours at full load and 40ºC ambient conditions

per MIL-217F Notice 2

EMC:

FCC 47CFR Part 15 Class B compliant

8-24

7-22

59.8

7-20

6-18

59.9

5-15

4-12

-XXꢀindicatesꢀdimmingꢀoptionsꢀareꢀavailable.ꢀSeeꢀoptionsꢀatꢀleft.ꢀBlankꢀ=ꢀﬁxedꢀcurrentꢀoutput

Ordering Options:

-D:

0-10V & Resistance dimmable version comes with an extra two wires +Purple/-Gray on

the output side. -D 0-10V Dimming is compatible with most quality 0-10V wall dimmers.

Seeꢀpageꢀ3ꢀforꢀadditionalꢀspeciﬁcations.

Constant Voltage - Product Speciﬁcations

ꢀ

Output Voltage Output Current Max. Output

Typical

Efﬁciency

Model Number

(Vdc ±5%)

Range (mA)

1250-5000

1000-4000

833-3300

750-3000

680-2720

625-2500

575-2300

418-1670

350-1400

313-1250

263-1050

175-700

Power (W)

-PD: PWM Dimmable version comes with an extra two wires +Purple/-Gray on the output

side. PD PWM version is PWM Dimmable via a positive 10% to 100% Duty Cycle,

ꢀ

LED60W-012

87%

•

200Hzꢀtoꢀ1KHz,ꢀ0-10VꢀPulse.ꢀSeeꢀpageꢀ4ꢀforꢀadditionalꢀspeciﬁcations.

LED60W-015

LED60W-018

LED60W-020

LED60W-022

59.9

88%

89%

59.8

89%

LED60W-024

90%

•

LED60W-027

LED60W-036

LED60W-043

LED60W-048

LED60W-058

LED60W-086

LED60W-134

LED60W-170

90%

91%

E332160

91%

92%

134

170

113-450

92%

88-350

59.5

92%

•

Indicates S.A.M.

Note:

LED drivers are designed and intended to operate LED loads only.

Non-LED loading may be outside the speciﬁed design limits of our

LED drivers, and therefore cannot be covered by any warranty.

If you desire to use our LED drivers to operate non-LED loads

please contact us to discuss compatibility.

Class 2:

US/Canada

US Only

Speciﬁcations subject to change without notice.

Rev 9-11-15

Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com

LED60W Series

SSL Solutions Faster Than The Speed Of Light^®

Pg 2 of 4

Dimensions - IN [mm]

[

]

6.81 173.0

[ ]

0.24 6

WIRE SPECS:

Input Leads: 18 AWG, rated 600 V, 105C, min.

Output Leads: 18 AWG, rated 300 V, 105C, min.

Dimming Leads: 22 AWG, rated 300 V, 105C.

All wires are stranded with solder dipped ends.

[

]

6.42 163.0

[

7.25 184.0

[

]

[

]

[

5.91 Min 150 Min

[

]

5.91 Min 150 Min

0.90 22.8

Dimming

Purple (+)

Gray (-)

INPUT

[

]

0.39±0.04 10±1

Black (L)

White (N)

Green (GND)

]

0.39±0.04 10±1

[

]

2.24±0.12 57.0±3

[

]

OUTPUT

Red (+)

Blue (-)

2.24±0.12 57.0±3

[

]

Tc = 90°C max

3.21 81.5

Power Factor / Load

THD / Load

50%

45%

40%

35%

30%

25%

20%

15%

10%

1.00

0.90

0.80

0.70

0.60

0.50

0.40

0.30

0.20

0.10

120Vac

277Vac

120Vac

277Vac

0.00

50%

60%

70%

80%

90%

100%

50%

60%

70%

80%

90%

100%

Load

Lifetime / Case Temperature

(Full Load @ 120Vac)

350

325

300

275

250

225

200

175

150

125

100

Case Hotspot Temperature (°C)

Note:

Life calculations are based on reliability with conﬁdence using

a 90% conﬁdence level and <5% failure rate. At a conﬁdence

level of 90% it is expected that <5% of the parts will fail at

the rated life provided. (Failure is deﬁned as a driver drifting

outside speciﬁcation, rather than fail to operate)

UL Conditions of Acceptability

See website for additional information

Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com

LED60W Series

SSL Solutions Faster Than The Speed Of Light^®

Pg 3 of 4

“-D” Option: 0-10VDC and Resistance Dimming

Parameters

Source Current out of 0-10V Purple Wire

Absolute Voltage Range on 0-10V (+) Purple Wire

Minimum

0 mA

Typical

—-

Maximum

2 mA

-2.0 V

—-

+15 V

Typical Dimming Circuit

Dim (+) Purple

IP710 Wall Dimmer

Dim (-) Gray

LED60W-XX-CXXXX-D

(Dimmer must be current-sink type control)

Output Current / 0-10VDC Dimming Input

100

10V

Dimming Input (Vdc)

Notes:

1. 0-10V dimmable version comes with an extra two wires +Purple/-Gray on the output side.

2. Compatible with most 0-10V Wall Slide dimmers and direct 0-10V analog signal. Recommended dimmer is Leviton IP710 or equivalent

3. 0-10V dimmable version is not intended to dim below about 5% @ 0V or 10% @ 1.0V

4. 0-10V dimmable version output will be 100% with Purple/Gray open and minimum with Purple/Gray Shorted.

Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com

LED60W Series

SSL Solutions Faster Than The Speed Of Light^®

Pg 4 of 4

“-PD” Option: PWM Dimming

Parameters

Minimum

-2.0V

-2.0

Typical

10V

Maximum

+28V

Absolute Maximum Voltage Range on PWM Input (Purple Wire)

Input LOW Level Voltage Range (Purple Wire)

Input HIGH Level Voltage Range (Purple Wire)

Sink Current into PWM Input (Purple Wire)

PWM Input Signal Frequency

+7.5V

+9.0

10V

28V

0mA

—

1.2mA

1000Hz

100%

200Hz

—

PWM Input Signal Positive Duty Cycle

10-90%

PWM Positive Dimming Typical Circuit

PWM (+) Purple

PWM In

PWM (-) Gray

LED60W-XX-CXXXX-PD

Output Current / Positive Duty Cycle

100

10%

20%

30%

40%

50%

60%

70%

80%

90% 100%

Positive Duty Cycle

Notes:

1. PWM Dimmable version comes with an extra 2 wires +Purple/-Gray on the output side.

2. Below 10% Duty cycle proper dimming operation is not assured. Unit is not intended to turn off at <10% Duty Cycle.

3. PWM dimmable version output will be 100% with Purple/Gray open and minimum with Purple/Gray Shorted.

Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com

相关型号：