LEDRA80X80 [ETC]
Red Area Light; 红色区域灯光型号: | LEDRA80X80 |
厂家: | ETC |
描述: | Red Area Light |
文件: | 总2页 (文件大小:443K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
®
Model LEDRA80X80
Red Area Light
Area Light Features
•
Lightly diffused, strobed, area light for PresencePLUS™ sensors. See Banner’s
website at www.bannerengineering.com for a complete lighting tutorial.
•
•
Solid-state visible red LEDs
Direct connection to PresencePLUS sensors, using 3-pin Pico-style connector
(Do not connect to any other power source)
•
Two available bracket options
Area Light Specifications
Light source
Illumination
Visible red LED, 660 nm
Lightly diffused, high-intensity area light.
At a 12" distance the light illuminates a 4" diameter area that is within 50% of the center intensity.
Supply voltage and
current
Voltage supplied by P1B65Q, P2B65Q or select PresencePLUS sensors only (do not connect to any other power source).
Current: 300 mA max.
Connections
Construction
Useful Life
2 m (6.5') pigtail with 3-wire, 8 mm female Pico-style connector. Connect to select PresencePLUS sensors only.
Low-carbon steel with black zinc plating, acrylic window
10,000 hours (LED ON time). When operated within specifications, output will decrease less than 30% after 10,000
hours and less than 40% after 20,000 hours.
Operating conditions
Cleaning instructions
Temperature: 0° to +50°C (+32° to 122°F)
Relative humidity: 90% at 50°C (non-condensing) max.
Regularly remove any dust, dirt, or fingerprints from the light source.
1. Blow off dust using anti-static compressed air.
2. If necessary, use a lens cloth and lens cleaner or window cleaner to wipe off remaining debris. Do not use any
other chemicals for cleaning.
110.4 mm
(4.35")
8.2 mm
(0.32")
94.0 mm
(3.70")
15.8 mm
(0.62")
61.0 mm
(2.40")
92.6 mm
(3.65")
46.2 mm
(1.81")
13.8 mm
(0.54")
4x M4 x 0.7
(7.1 mm Deep)
Figure 1. Model LEDRA80X80 area light dimensions
Printed in USA
02/03
P/N 63220 rev. A
LEDRA80X80 Area Light
Mounting Brackets
• 14-ga. zinc-plated low-carbon steel
• (4) M4 socket-head cap screws, washers and hex
key included
• 13-ga. zinc-plated low-carbon steel
• (4) M4 Phillips flathead screws included
• For mounting light from front
SMBABM
SMBACM
• For mounting light from rear
10.2 mm
(0.40")
110.2 mm
(4.34")
8.8 mm
30.5 mm
(0.35")
4.7 mm
(0.18")
(1.20")
10.2 mm
(0.40")
2x 22.9 mm
(0.90")
40.6 mm
(1.60")
55.1 mm
(2.17")
5.1 mm
(0.20")
8.1 mm
(0.32")
94.0 mm
(3.70")
15.8 mm
(0.62")
60.9 mm
(2.40")
2x 12.7 mm
(0.50")
2x Ø4.6 mm
(0.18")
C'sink ø8.3 mm
(0.33")
2.2 mm
(0.09")
86.4 mm
(3.40")
46.2 mm
(1.82")
92.5 mm
(3.64")
61.0 mm
(2.40")
2x 14.9 mm
(0.59")
1/4-20
2x M6 x 1
WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for
one year. Banner Engineering Corp. will repair or replace, free of charge, any product of
its manufacture found to be defective at the time it is returned to the factory during the
warranty period. This warranty does not cover damage or liability for the improper
application of Banner products. This warranty is in lieu of any other warranty either
expressed or implied.
®
P/N 63220 rev. A
Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN 55441 • Phone: 763.544.3164 • www.bannerengineering.com • E-mail: sensors@baneng.com
相关型号:
©2020 ICPDF网 联系我们和版权申明