LEG100W-143-C0700 [ETC]
Switch Mode LED Drivers;型号: | LEG100W-143-C0700 |
厂家: | ETC |
描述: | Switch Mode LED Drivers |
文件: | 总3页 (文件大小:550K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
LEG-100W Series– Fixed Output and Dimmable
Switch Mode LED Drivers
Constant Current, Non-Isolated
Black Magic Thermal Advantage™ Metallic Housing
Electrical Specifications
Input Voltage Range:
Input Over-Voltage:
Frequency:
120-277 Vac Nom. (108-305 V Min/Max)
Can endure 320Vac for 48 Hrs, 350Vac for 2 Hrs
50/60 Hz Nom. (47-63 Hz Min/Max)
>0.90 @ full load, 100V through 277V
<_ 20% @ for all loads >80%
<40.0 Amps max @ 230 Vac, cold start 25ºC
0.9A@ 120Vac, 0.47A @ 230Vac
100W
Power Factor:
THD:
Inrush Current:
Input Current:
Maximum Power:
Current Accuracy:
Load Regulation:
Leakage Current:
Hold Up Time:
Protection:
± 1% Over input line variation
± 4%
• Total Power: 100 Watts
• Input Voltage: 100-277 Vac Nom.
• UL Dry & Damp Location Rated
• IP66
400 µA Typical
Half Cycle
Output Over-Voltage, Output Over-Current, and
Output Short Circuit Protection, reset by power cycling
• High Power Factor
• UL8750, EN61347, CSA 22.2
Environmental Specifications
Minimum Starting Temp: -30ºC
Maximum Case Temp.
Storage Temperature:
Humidity:
80°C
-40ºC to +85ºC
5% to 95%
Cooling:
Convection
5 to 55 Hz/2g, 30 minutes
Class A
Vibration Frequency:
Sound Rating:
MTBF:
Constant Current - Non Dimming
395,000 Hours at full load and 40ºC ambient conditions
per MIL-217F Notice 2
Output Voltage Output Current Max Output
Max
Efficiency
Model Number
Range (Vdc)
(mA ±3%)
350 mA
530 mA
700 mA
1050 mA
Power (W)
LEG100W-286-C0350
LEG100W-188-C0530
LEG100W-143-C0700
LEG100W-095-C1050
95-286
100
92%
91%
90%
89%
EMC:
FCC 47CFR Part 15 Class A compliant
63-188
100
Impact Resistance:
Weight:
1g/s
48-143
100
26 oz (738 grams)
32-95
100
Ordering Options:
Constant Current - 0-10VDC Dimming
-D: 0-10V & Resistance dimmable version comes with an extra two wires +Purple/-Gray
on the output side. 0-10V Dimming is compatible with most quality 0-10V dimmers.
See pg. 3 for more information.
Output Voltage Output Current Max Output
Max
Efficiency
Model Number
Range (Vdc)
(mA ±3%)
Power (W)
LEG100W-286-C0350-D
LEG100W-188-C0530-D
LEG100W-143-C0700-D
LEG100W-095-C1050-D
95-286
350
100
92%
91%
90%
89%
63-188
530
100
48-143
700
100
32-95
1050
100
E332160
Note:
LED drivers are designed and intended to operate LED loads only.
Non-LED loading may be outside the specified design limits of our
LED drivers, and therefore cannot be covered by any warranty.
If you desire to use our LED drivers to operate non-LED loads
please contact us to discuss compatibility.
Specifications subject to change without notice.
Rev 8-31-15
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
LEG100W Series
SSL Solutions Faster Than The Speed Of Light®
Pg 2 of 3
Dimensions - Inches (mm)
OUTPUT
Red (+)
Blue (-)
INPUT
Dimming
White (N)
Black (L)
Purple (-)
Gray (+)
Tc = 80°C max
WIRE SPECS:
CASE MUST BE GROUNDED IN END USE APPLICATION
AC Input / DC Output / Dimming Control:
• Solid Copper
• 8 IN [203mm]
• UL1316/1452 #18AWG
Lifetime/Case Temperature
(Full Load @ 120Vac)
400
350
300
250
200
150
100
50
0
40
45
50
55
60
65
70
75
80
Case Hotspot Temperature (°C)
Note:
Life calculations are based on reliability with confidence using
a 90% confidence level and <5% failure rate. At a confidence
level of 90% it is expected that <5% of the parts will fail at
the rated life provided. (Failure is defined as a driver drifting
outside specification, rather than fail to operate)
UL Conditions of Acceptability
See website for additional information
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
LEG100W Series
SSL Solutions Faster Than The Speed Of Light®
Pg 3 of 3
“-D” Option: - 0-10VDC and Resistance Dimming
Parameters
Minimum
-2.0 V
Typical
Maximum
+15 V
Absolute Voltage Range on 0-10V (+) Purple Wire
Source Current into 0-10V Purple Wire
—
—
0 mA
2 mA
Typical Dimming Circuit
Dim (+) Purple
IP710 Wall Dimmer
Dim (-) Gray
LEG100W-XX-CXXXX-D
(Dimmer must be current-sink type control)
Output Current / 0-10VDC Dimming Input
100
90
80
70
60
50
40
30
20
10
0
0V
1V
2V
3V
4V
5V
6V
7V
8V
9V
10V
Dimming Input (Vdc)
Notes:
1. 0-10V dimmable version comes with an extra two wires +Purple/-Gray on the output side.
2. When connected to a dimming device, 0-10V dimmable version will have a ±10% output current tolerance.
This is due to variation between different 0-10V dimmers.
3. Compatible with most 0-10V Wall Slide dimmers and direct 0-10V analog signal. Recommended dimmer is Leviton IP710 or equivalent
4. 0-10V dimmable version is not intended to dim below about 5% @ 0V or 10% @ 1.0V
5. 0-10V dimmable version output will be 100% with Purple/Gray open and minimum with Purple/Gray Shorted.
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
相关型号:
©2020 ICPDF网 联系我们和版权申明