LM6152BCN [ETC]

IC-DUAL 45MHZ R2R I/O AMP ; IC- DUAL 45MHZ R2R I / O放大器\n
LM6152BCN
型号: LM6152BCN
厂家: ETC    ETC
描述:

IC-DUAL 45MHZ R2R I/O AMP
IC- DUAL 45MHZ R2R I / O放大器\n

放大器 光电二极管
文件: 总4页 (文件大小:117K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
PRELIMINARY  
April 1995  
LM6152 Dual and LM6154 Quad  
High Speed/Low Power  
45 MHz Rail-to-Rail I/O Operational Amplifiers  
General Description  
Features (For 5V Supply)  
Y
b
Rail-to-rail input CMVR  
0.25V to 5.25V (max/min)  
Using patent pending circuit topologies, the LM6152/54  
provides new levels of speed vs power performance in ap-  
plications where low voltage supplies or power limitations  
made compromise necessary. With only 1.5 mA/amp sup-  
ply current, the 45 MHz bandwidth of this device supports  
new portable applications where higher power devices un-  
acceptably drain battery life.  
Y
Rail-to-rail output swing  
0.01V to 4.99V (max/min)  
@
Y
Wide gain-bandwidth:  
45 MHz (typ)  
50 kHz  
Y
Slew rate  
30 V/ms (typ)  
1.5/Amp (typ)  
1.8V to 24V  
Y
Low supply current  
Y
Wide supply range  
Y
Fast settling time:  
Ð Gain  
In addition, the LM6152/54 can be driven by voltages that  
exceed both power supply rails, thus eliminating concerns  
over exceeding the common-mode voltage range. The rail-  
to-rail output swing capability provides the maximum possi-  
ble dynamic range at the output. This is particularly impor-  
tant when operating on low supply voltages. The  
LM6152/54 can also drive capacitive loads without oscillat-  
ing.  
e
10k  
108 dB (typ) with R  
L
Y
PSRR  
87 dB (typ)  
Applications  
Y
Portable high speed instrumentation  
Y
5V signal conditioning amplifiers/ADC buffers  
Y
Bar code scanners  
Y
Wireless communications  
Operating on supplies of 1.8V to over 24V, the LM6152/54  
is excellent for a very wide range of applications, from bat-  
tery operated systems with large bandwidth requirements to  
high speed instrumentation.  
Connection Diagrams  
8-Pin DIP/SO  
14-Pin DIP/SO  
TL/H/12350–1  
Top View  
TL/H/12350–2  
Top View  
Ordering Information  
Temperature Range  
Industrial  
NSC  
Package  
Drawing  
b
a
40 C to 85 C  
§
§
8-Pin Molded DIP  
8-Pin Small Outline  
14-Pin Molded DIP  
14-Pin Small Outline  
LM6142AIN, LM6142BIN  
N08E  
M08A  
N14A  
M14A  
LM6142AIM, LM6142BIM  
LM6144AIN, LM6144BIN  
LM6144AIM, LM6144BIM  
C
1996 National Semiconductor Corporation  
TL/H/12350  
RRD-B30M56/Printed in U. S. A.  
http://www.national.com  
Physical Dimensions inches (millimeters) unless otherwise noted  
Order Number LM6142AIM or LM6142BIM  
8-Lead (0.150 Wide) Molded Small Outline Package, JEDEC  
NS Package Number M08A  
×
Order Number LM6144AIM or LM6144BIM  
16-Lead (0.150 Wide) Molded Small Outline Package, JEDEC  
NS Package Number M16A  
×
http://www.national.com  
2
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)  
8-Lead (0.300 Wide) Molded Dual-In-Line Package, JEDEC  
×
NS Package Number N08E  
3
http://www.national.com  
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)  
14-Lead (0.300 Wide) Molded Dual-In-Line Package, JEDEC  
×
NS Package Number N14A  
LIFE SUPPORT POLICY  
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT  
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL  
SEMICONDUCTOR CORPORATION. As used herein:  
1. Life support devices or systems are devices or  
systems which, (a) are intended for surgical implant  
into the body, or (b) support or sustain life, and whose  
failure to perform, when properly used in accordance  
with instructions for use provided in the labeling, can  
be reasonably expected to result in a significant injury  
to the user.  
2. A critical component is any component of a life  
support device or system whose failure to perform can  
be reasonably expected to cause the failure of the life  
support device or system, or to affect its safety or  
effectiveness.  
National Semiconductor  
Corporation  
National Semiconductor  
Europe  
National Semiconductor  
Hong Kong Ltd.  
National Semiconductor  
Japan Ltd.  
a
1111 West Bardin Road  
Arlington, TX 76017  
Tel: 1(800) 272-9959  
Fax: 1(800) 737-7018  
Fax: 49 (0) 180-530 85 86  
13th Floor, Straight Block,  
Ocean Centre, 5 Canton Rd.  
Tsimshatsui, Kowloon  
Hong Kong  
Tel: (852) 2737-1600  
Fax: (852) 2736-9960  
Tel: 81-043-299-2308  
Fax: 81-043-299-2408  
@
Email: europe.support nsc.com  
a
Deutsch Tel: 49 (0) 180-530 85 85  
a
English Tel: 49 (0) 180-532 78 32  
a
Fran3ais Tel: 49 (0) 180-532 93 58  
a
Italiano Tel: 49 (0) 180-534 16 80  
http://www.national.com  
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.  

相关型号:

LM6152BIN

DUAL OP-AMP, 2500uV OFFSET-MAX, 45MHz BAND WIDTH, PDIP8, 0.300 INCH, PLASTIC, DIP-8
TI

LM6154

Dual and Quad High Speed/Low Power 75 MHz GBW Rail-to-Rail I/O Operational Amplifiers
NSC

LM6154

四路、75MHz、GBW、轨至轨 I/O 运算放大器
TI

LM6154ACM

Dual and Quad High Speed/Low Power 75 MHz GBW Rail-to-Rail I/O Operational Amplifiers
NSC

LM6154ACMX

Dual and Quad High Speed/Low Power 75 MHz GBW Rail-to-Rail I/O Operational Amplifiers
NSC

LM6154ACN

Dual and Quad High Speed/Low Power 75 MHz GBW Rail-to-Rail I/O Operational Amplifiers
NSC

LM6154AIM

QUAD OP-AMP, 2500uV OFFSET-MAX, 45MHz BAND WIDTH, PDSO14, 0.150 INCH, PLASTIC, SOP-14
TI

LM6154AIMX

QUAD OP-AMP, 2500uV OFFSET-MAX, 45MHz BAND WIDTH, PDSO14, 0.150 INCH, PLASTIC, SOP-14
TI

LM6154AIN

QUAD OP-AMP, 2500uV OFFSET-MAX, 45MHz BAND WIDTH, PDIP14, 0.300 INCH, PLASTIC, DIP-14
TI

LM6154BCM

Dual and Quad High Speed/Low Power 75 MHz GBW Rail-to-Rail I/O Operational Amplifiers
NSC

LM6154BCM

四路、75MHz、GBW、轨至轨 I/O 运算放大器 | D | 14 | 0 to 70
TI

LM6154BCM/NOPB

IC QUAD OP-AMP, 5000 uV OFFSET-MAX, 75 MHz BAND WIDTH, PDSO14, SOIC-14, Operational Amplifier
NSC