LXZ1-PR01-0550 [ETC]
Color and White LED Portfolio; 颜色和白光LED的组合型号: | LXZ1-PR01-0550 |
厂家: | ETC |
描述: | Color and White LED Portfolio |
文件: | 总28页 (文件大小:1528K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Color andWhite
LED Portfolio
Illuminating
your creativity
Technical Datasheet DS105
LUXEON® Z
Color and White LED Portfolio
Introduction
LUXEON® Z is a broad portfolio of Color and White LEDs that enable never before seen lumen
density, flexibility and freedom of design. Available in the full spectrum of colors from 440nm to
670nm and select white color temperatures, LUXEON Z is ideal for entertainment/stage lighting,
indoor and outdoor architectural lighting, emergency vehicle lighting, remote phosphor applications
and a wide spectrum of specialty lighting applications.
Features
•ꢀ 2.2 mm2 micro footprint
•ꢀ Un-encapsulated
•ꢀ Tested and Binned at 500 mA
•ꢀ Up to 1A max drive current
•ꢀ Up to 150C maxTj
Benefits
•ꢀ Industry’s leading Lm/mm2 for high flux density solution
•ꢀ Highest degree of design flexibility
•ꢀ Superior color mixing and beam control through choice of optics
•ꢀ Enables customizable light sources: linear, rectangular, circular.
Table of Contents
General Product Information.....................................................................................................................................3
Product Nomenclature..........................................................................................................................................3
Flux and Efficacy Performance Characteristics......................................................................................................4
Flux Performance, Binning, and Supportability .................................................................................................5
Optical Characteristics................................................................................................................................................6
Electrical Characteristics.............................................................................................................................................7
Absolute Maximum Ratings..................................................................................................................................8
JEDEC Moisture Sensitivity...................................................................................................................................8
Reflow Soldering Characteristics..............................................................................................................................9
Mechanical Dimensions: LUXEON Z Blue/Green/Royal-Blue and Cyan Emitters......................................10
Mechanical Dimensions: LUXEON ZWhite Emitter .........................................................................................11
Mechanical Dimensions: LUXEON Z Red, Red-Orange,Amber and Deep Red Emitters.........................12
Pad Configuration.......................................................................................................................................................13
Solder Pad Design.................................................................................................................................................13
Wavelength Characteristics......................................................................................................................................14
Typical Light Output Characteristics overTemperature....................................................................................15
Typical Forward Current Characterisics ...............................................................................................................16
Typical Relative Luminous Flux................................................................................................................................17
Typical Radiation Patterns.........................................................................................................................................18
Emitter PocketTape Packaging.................................................................................................................................21
Emitter Reel Packaging ..............................................................................................................................................23
Luminous Flux Bins.....................................................................................................................................................24
ForwardVoltage Bins..................................................................................................................................................25
Color Bins.....................................................................................................................................................................26
LUXEON Z Datasheet DS105 20120516
2
General Product Information
Product Nomenclature
The part number designation for LUXEON Z - Color LEDs is explained as follows:
L X Z 1 - A B C D - E F G H
Where:
A — designates radiation pattern (value P for lambertian)
B — designates color (see LUXEON Z color binning and labeling section)
C — designates color variant (0 for color variants)
D — designates test current (value 1 for 350 mA; 2 for 700 mA.)
E — open slot to accommodate additional requirements per product and part number
FGH — minimum luminous flux (lm) or radiometric power (mW) performance
The part number designation for LUXEON Z -White LEDs is explained as follows
L X Z 1 - A B C D - E F G H
Where:
A — 1st digit of Color temperature (e.g. 4 for 4000K, 3 for 3000K)
B — 2nd digit of Color temperature (e.g.: 0 for 4000K, 0 for 3000K)
C — 1st digit of CRI (e.g.: 6 for 60 CRI, 8 for 85 CRI)
D — 2nd digit of CRI (e.g.: 0 for 60 CRI, 5 for 85 CRI)
E — open slot to accommodate additional requirements per product and part number
FGH — minimum luminous flux (lm)
LUXEON Z Datasheet DS105 20120516
3
Flux and Efficacy Performance Characteristics
Luminous Flux Characteristics for LUXEON Z Color Portfolio, Thermal PadTemperature =25°C
Table 1.
Min Luminous
Flux (lm)
Typ Efficacy
(lm/W) or
WPE
Typ Luminous
Flux (lm) or
Radiometric
Power (mW)
Typ Efficacy
(lm/W) or
WPE
Typ
Flux
Part
or Radiometric
Power (mW)
Color
Number
(lm/mw)
Performance @ 500 mA
Performance @ 700 mA
LXZ1-PM01-0104
LXZ1-PM01-0096
LXZ1-PM01-0088
LXZ1-PM01-0080
LXZ1-PM01-0072
LXZ1-PE01-0080
LXZ1-PE01-0072
LXZ1-PE01-0064
LXZ1-PE01-0056
LXZ1-PE01-0048
LXZ1-PB01-0048
LXZ1-PB01-0040
LXZ1-PB01-0032
LXZ1-PB01-0024
LXZ1-PR01-0600
LXZ1-PR01-0550
LXZ1-PR01-0500
LXZ1-PR01-0450
LXZ1-PA01-0350
LXZ1-PA01-0300
LXZ1-PA01-0250
LXZ1-PD01-0056
LXZ1-PD01-0048
LXZ1-PD01-0040
LXZ1-PD01-0032
LXZ1-PH01-0064
LXZ1-PH01-0056
LXZ1-PH01-0048
LXZ1-PL01-0064
LXZ1-PL01-0056
LXZ1-PL01-0048
LXZ1-PL01-0040
104
96
98
92
63
59
120
113
103
93
53
50
Green
88
80
84
54
46
72
76
49
41
80
81
52
100
86
44
72
70
45
38
Cyan
Blue
64
68
44
84
38
56
60
39
74
33
48
54
35
67
30
48
50
34
65
30
40
44
30
57
27
32
38
26
49
23
24
30
21
39
19
600
550
500
450
350
300
250
56
620
570
530
480
360
330
280
57
43%
40%
37%
33%
34%
32%
26%
54
823
757
704
637
454
416
353
77
40%
37%
35%
31%
31%
29%
24%
49
Royal-Blue
Deep Red
Red
48
52
50
70
46
40
44
42
60
38
32
37
35
50
32
64
66
63
90
58
Red-Orange
Amber
56
60
57
82
53
48
54
51
73
47
64
66
63
90
59
56
60
57
82
53
48
54
51
73
48
40
46
44
63
41
Notes forTable 1:
1. Minimum luminous flux or radiometric power performance guaranteed within published operating conditions. Philips Lumileds maintains a
tolerance of 6.5ꢀ on flux and power measurements.
2. Typical luminous flux or radiometric power performance when device is operated within published operating conditions.
LUXEON Z Datasheet DS105 20120516
4
Flux and Efficacy Performance Characteristics,
Continued
Luminous Flux Characteristics for LUXEON ZWhite, Thermal PadTemperature =25°C
Table 2.
Min Luminous
Flux (lm)
Typ Efficacy
(lm/W) or
WPE
Typ Luminous
Flux (lm) or
Radiometric
Power (mW)
Typ Efficacy
(lm/W) or
WPE
Typ
Flux
Part
or Radiometric
Power (mW)
White
Number
(lm/mw)
Performance @ 500 mA
Performance @ 700 mA
LXZ1-4070-0144
LXZ1-4070-0134
LXZ1-4070-0124
LXZ1-4070-0114
144
134
124
114
148
140
130
122
102
96
194
183
170
160
94
88
83
78
4000K/
70 CRI
90
85
Flux Performance, Binning, and Supportability
LEDs are produced with semiconductor technology that is subject to process variation, yielding a range of flux performance that is approximately
Gaussian in nature. In order to provide customers with fine granularity within the overall flux distribution, Philips Lumileds separates LEDs into
fixed, easy to design with, minimum luminous flux bins. To verify supportability of parts chosen for your application design, please consult your
Philips Lumileds or Future Lighting Solutions sales representative.
Luminous Flux Bins
LUXEON Z Datasheet DS105 20120516
5
Optical Characteristics
LUXEON Z Color Portfolio atTest Current [1]
Thermal PadTemperature = 25°C
Table 3.
Typical
Temperature
Coefficient of
Dominant or Peak Included
Typical
Total
Typical
Typical
Viewing
Angle [6]
DominantWavelength [2] lD ,
or PeakWavelength [3] lP
Spectral
Half-width[4]
(nm)
Wavelength
(nm/°C)
DlD/ DTJ
Angle [5]
(degrees) (degrees)
u0.90V 2u 1/2
Color
Min.
Typ.
Max.
Dl1/2
Green [7]
Cyan [7]
Blue [7]
520.0 nm
490.0 nm
460.0 nm
440.0 nm
620.0 nm
650.0 nm
610.0 nm
584.5 nm
588.0 nm
530.0 nm
505.0 nm
470.0 nm
447.5 nm
627.0 nm
655.0 nm
617.0 nm
590.0 nm
591.0 nm
550.0 nm
520.0 nm
490.0 nm
460.0 nm
645.0 nm
670.0 nm
620.0 nm
597.0 nm
592.0 nm
Royal-Blue [3] [7]
Red [8]
Deep Red [8]
Red-Orange [8]
Amber [8]
PC Amber [7]
Notes forTable 3:
1. LXML-PR01-XXXX, LXM2-PL01-XXXX and LXM3-PD01-XXXX emitters are tested at 350 mA, LXML-PR02-XXXX emitters are tested
at 700 mA.
2. Dominant wavelength is derived from the CIE 1931 Chromaticity diagram and represents the perceived color.
Philips Lumileds maintains a tolerance of 0.5 nm for dominant wavelength measurements.
3. Royal-blue and Deep Red LEDs are binned by radiometric power and peak wavelength rather than photometric lumens.
Philips Lumileds maintains a tolerance of 2nm for peak wavelength measurements.
4. Spectral width at ½ of the peak intensity.
5. Total angle at which 90ꢀ of total luminous flux is captured.
6. Viewing angle is the off axis angle from lamp centerline where the luminous intensity is ½ of the peak value.
7. PC amber, green, cyan, blue and royal-blue products are built with Indium Gallium Nitride (InGaN).
8. All red, deep red, red-orange, and amber are built with Aluminum Indium Gallium Phosphide (AlInGaP).
LUXEON Z Datasheet DS105 20120516
6
Electrical Characteristics
Electrical Characteristics at 500 mA for LUXEON Z Colors,
Thermal PadTemperature = 25ºC
Table 4.
Forward
VoltageVf
@ 700 mA
Typ.
Typical Temperature
Typical Thermal
Resistance Junction to
Thermal Pad (°C/W)
Ru J-C
[1]
ForwardVoltageVf
@ 500 mA (V)
Coefficient of Forward
Voltage [2] (mV/°C)
DVf / DTJ
Part
Number
Color
Min.
Typ.
Max.
Green
Cyan
LXZ1-PM01
LXZ1-PE01
LXZ1-PB01
LXML-PR01
LXZ1-PD01
LXZ1-PA01
LXZ1-PH01
LXZ1-PL01
2.50
3.50
3.50
3.50
1.75
1.75
1.75
1.75
3.10
3.10
3.00
2.90
2.15
2.15
2.15
2.15
3.50
3.50
3.50
3.50
2.75
2.75
2.75
2.75
Blue
Royal-Blue
Red
Deep Red
Red-Orange
Amber
Notes forTable 4:
1. LUXEON Z royal-blue measured between 25°C =Tj = 110°C and If = 700 mA.
2. Measured between 25°C =TJ = 110°C at If = 350 mA.
3. Philips Lumileds maintains a tolerance of 0.06V on forward voltage measurements.
Electrical Characteristics at 500 mA for LUXEON ZWhite,
Thermal PadTemperature = 25ºC
Table 5.
Forward
VoltageVf
@ 700 mA
Typ.
Typical Temperature
Typical Thermal
Resistance Junction to
Thermal Pad (°C/W)
Ru J-C
[1]
ForwardVoltageVf
@ 500 mA (V)
Coefficient of Forward
Voltage [2] (mV/°C)
DVf / DTJ
Part
Number
White
Min.
Typ.
Max.
4000K/70CRI
LXZ1-4070
2.50
2.90
3.50
LUXEON Z Datasheet DS105 20120516
7
Absolute Maximum Ratings
Table 6.
Parameter
Green/Cyan/
Blue/Royal-Blue
1000
Red/Deep-Red
Red-Orange/Amber
White
4000K
700
DC Forward Current (mA)
Peak Pulsed Forward
Current (mA)
700
700
1000
700
ESD Sensitivity
JESD22-A114-B
135°C
LED JunctionTemperature [1]
Operating CaseTemperature
at 350 mA
150°C
130°C
-40°C - 135°C
-40°C - 120°C
-40°C - 110°C
StorageTemperature
SolderingTemperature
Allowable Reflow Cycles
-40°C - 135°C
JEDEC 020c 260°C
3
-40°C - 135°C
JEDEC 020c 260°C
3
-40°C - 135°C
JEDEC 020c 260°C
3
Autoclave Conditions 121°C at 2 ATM 100% Relative Humidity for 96 Hours Maximum
LUXEON Rebel Color Portfolio LEDs are not designed to be driven in reverse bias.
ReverseVoltage (Vr)
Notes forTable 6:
1. Proper current derating must be observed to maintain junction temperature below the maximum.
2. The maximum rating for LUXEON Z royal-blue is 1200 mA with peak pulsed forward current not to exceed 60 seconds.
JEDEC Moisture Sensitivity
Table 7.
Soak Requirements
Level
Floor Life
Standard
Time
(hours)
168
Conditions
Time
unlimited
Conditions
[ 30°C /
85% RH
1
85°C / 85%
RH
+ 5 / -0
LUXEON Z Datasheet DS105 20120516
8
Reflow Soldering Characteristics
JEDEC 020c
Table 8.
Profile Feature
Lead Free Assembly
3°C / second max
150°C
Average Ramp-Up Rate (Tsmax toTp)
PreheatTemperature Min (Tsmin)
PreheatTemperature Max (Tsmax
)
200°C
PreheatTime (tsmin to tsmax
)
60 - 180 seconds
217°C
Temperature TL (tL)
Time Maintained Above TemperatureTL (tL)
Peak / ClassificationTemperature (TP)
Time Within 5°C of Actual PeakTemperature (tP)
Ramp-Down Rate
60 - 150 seconds
260°C
20 - 40 seconds
6°C / second max
8 minutes max
Time 25°C to PeakTemperature
Note forTable 8:
- All temperatures refer to the application Printed Circuit Board (PCB), measured on the surface adjacent to the package body.
LUXEON Z Datasheet DS105 20120516
9
Mechanical Dimensions: LUXEON Z Blue/Green/Royal-
Blue and Cyan Emitters
Figure 1. Package outline drawing.
Notes for Figure 1:
- To avoid damage, do not handle the device by the emitter lens.
- Drawings not to scale.
- All dimensions are in millimeters.
- The thermal pad is electrically isolated from the anode and cathode contact pads.
LUXEON Z Datasheet DS105 20120516
10
Mechanical Dimensions: LUXEON Z White Emitter
Figure 2. Package outline drawing.
Notes for Figure 2:
- To avoid damage, do not handle the device by the emitter lens.
- Drawings not to scale.
- All dimensions are in millimeters.
- The thermal pad is electrically isolated from the anode and cathode contact pads.
LUXEON Z Datasheet DS105 20120516
11
Mechanical Dimensions: LUXEON Z Red, Red-Orange,
Amber and Deep Red Emitters
Figure 3. Package outline drawing.
Notes for Figure 3:
- To avoid damage, do not handle the device by the emitter lens.
- Drawings not to scale.
- All dimensions are in millimeters.
- The thermal pad is electrically isolated from the anode and cathode contact pads.
LUXEON Z Datasheet DS105 20120516
12
Pad Configuration
Data coming soon.
Figure 4. Pad configuration.
Solder Pad Design
Data coming soon.
Figure 5. Solder pad layout.
LUXEON Z Datasheet DS105 20120516
13
Wavelength Characteristics
Green, Cyan, Blue, all Royal-Blue, Red, Red-Orange and Amber
atTest Current,Thermal PadTemperature = 25°C
1.0
Red-
Orange
Cyan
Blue
Green
Amber
0.8
0.6
0.4
Royal
Blue
Deep
Red
Red
0.2
0.0
600
650
700
550
500
400
450
Wavelength (nm)
Figure 6. Relative intensity vs. wavelength.
LUXEON Z Datasheet DS105 20120516
14
Typical Light Output Characteristics overTemperature
1.1
1.0
0.9
0.8
0.7
Green (LXZ1-PM01) Photometric
Cyan (LXZ1-PM01) Photometric
0.6
Blue (LXz1-PB01) Photometric
Royal Blue (LXZ1-PR01) Radiometric
0.5
20
30
40
50
60
70
80
90
Thermal Pad Temperature (°C)
Figure 7. Relative light output vs. thermal pad temperature for cyan, blue, green and royal-blue LUXEON Z atTest Current.
1.2
1.0
0.8
0.6
0.4
Amber (LXZ1-PL01)
Deep Red (LXZ1-PA01)
0.2
Red (LXZ1-PD01)
Red Orange (LXZ1-PH01)
0.0
20
30
40
50
60
70
80
90
Thermal Pad Temperature (°C)
Figure 8. Relative light output vs. thermal pad temperature for red, deep red, red-orange and amber LUXEON Z atTest Current.
1.1
1.0
0.9
0.8
0.7
0.6
White (LXZ1-4070)
0.5
20
30
40
50
60
70
80
90
Thermal Pad Temperature (°C)
Figure 9. Relative light output vs. thermal pad temperature for white LUXEON Z atTest Current.
LUXEON Z Datasheet DS105 20120516
15
Typical Forward Current Characterisics
1200
Royal Blue (LXZ1-PR01)
1000
Blue (LXZ1-PB01)
Cyan (LXZ1-PE01)
800
Green (LXZ1-PM01)
600
400
200
0
1.8
2.3
2.8
3.3
3.8
Forward Voltage (V)
Figure 10. Forward current vs. forward voltage for green, cyan, blue and royal-blue LUXEON Z atThermal PadTemperature = 25ºC.
1200
Amber (LXZ1-PL01)
Deep Red (LXZ1-PA01)
1000
Red (LXZ1-PD01)
Red Orange (LXZ1-PH01)
800
600
400
200
0
1.8
2
2.2
2.4
2.6
2.8
3
Forward Voltage (V)
Figure 11. Forward current vs. forward voltage for red, deep red, red-orange and amber LUXEON Z atThermal PadTemperature = 25ºC.
1200
White (LXZ1-4070)
1000
800
600
400
200
0
2.4
2.5
2.6
2.7
2.8
2.9
3
3.1
3.2
Forward Voltage (V)
Figure 12. Forward current vs. forward voltage for white LUXEON Z atThermal PadTemperature = 25ºC.
LUXEON Z Datasheet DS105 20120516
16
Typical Relative Luminous Flux
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
Royal Blue (LZX1-PR01) Radiometric
Blue (LXZ1-PB01) Photometric
Cyan (LXZ1-PE01) Photometric
Green (LZX1-MP01) Photometric
0
200
400
600
800
1000
1200
Forward Current (mA)
Figure 13. Typical relative luminous flux vs. forward current for green, cyan, blue & royal-blue LUXEON Z at thermal pad temperature = 25ºC.
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
Amber (LXZ1-PL01)
0.4
Deep Red (LXZ1-PA01)
Red (LXZ1-PD01)
0.2
Red Orange (LXZ1-PH01)
0.0
0
200
400
600
800
1000
1200
Forward Current (mA)
Figure 14. Typical relative luminous flux vs. forward current for red, deep red, red-orange & amber LUXEON Z at thermal pad temperature = 25ºC.
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
White (LXZ1-4070)
0
200
400
600
800
1000
1200
Forward Current (mA)
Figure 15. Typical relative luminous flux vs. forward current for white LUXEON Z at thermal pad temperature = 25ºC.
LUXEON Z Datasheet DS105 20120516
17
Typical Radiation Patterns
LUXEON Z Typical Spatial Radiation Pattern for Green, Cyan, Blue and
Royal-Blue
120%
100%
80%
60%
40%
20%
0%
Blue (LXZ1-PB01)
Cyan (LXZ1-PE01)
Green (LXZ1-PM01)
Royal Blue (LXZ1-PR01)
-90
-75
-60
-45
-30
-15
0
15
30
45
60
75
90
Anglular Displacement (deg)
Figure 16. Typical spatial radiation pattern for green, cyan, blue and royal-blue LUXEON Z.
LUXEON Z Typical Polar Radiation Pattern for Green, Cyan, Blue and
Royal-Blue
0°
1
-30°
30°
0.8
0.6
0.4
0.2
0
-60°
60°
-90°
90°
Blue (LXZ1-PB01)
Cyan (LXZ1-PE01)
-120°
120°
Green (LXZ1-PM01)
Royal Blue (LXZ1-PR01)
-150°
150°
180°
Figure 17. Typical polar radiation pattern for green, cyan, blue and royal-blue LUXEON Z.
LUXEON Z Datasheet DS105 20120516
18
LUXEON Z Typical Spatial Radiation Pattern for Red, Red-Orange and
Deep Red
120%
100%
80%
60%
Red (LXZ1-PD01)
40%
Red Orange (LXZ1-PH01)
Deep Red (LXZ1-PA01)
20%
0%
-90
-75
-60
-45
-30
-15
0
15
30
45
60
75
90
Anglular Displacement (deg)
Figure 18. Typical spatial radiation pattern for red, red-orange and deep red.
LUXEON Z Typical Polar Radiation Pattern for Red, Red-Orange and
Deep Red
0°
1
-30°
30°
0.8
0.6
0.4
0.2
0
-60°
60°
-90°
90°
Deep Red (LXZ1-PA01)
Red (LXZ1-PD01)
Red Orange (LXZ1-PH01)
-120°
120°
-150°
150°
180°
Figure 19. Typical polar radiation pattern for red, red-orange and deep red.
LUXEON Z Datasheet DS105 20120516
19
LUXEON Z Typical Spatial Radiation Pattern for Amber
120%
100%
80%
60%
40%
Amber (LXZ1-PL01)
20%
0%
-90
-75
-60
-45
-30
-15
0
15
30
45
60
75
90
Anglular Displacement (deg)
Figure 20. Typical spatial radiation pattern for deep red lambertian.
LUXEON Z Typical Polar Radiation Pattern for Amber
0°
1
-30°
30°
0.8
0.6
0.4
0.2
0
-60°
60°
-90°
90°
Amber (LXZ1-PL01)
-120°
120°
-150°
150°
180°
Figure 21. Typical polar radiation pattern for deep red lambertian.
LUXEON Z Datasheet DS105 20120516
20
Emitter PocketTape Packaging
Figure 22. Emitter pocket tape packaging for Blue, Green, Royal-Blue and Cyan.
LUXEON Z Datasheet DS105 20120516
21
Figure 23. Emitter pocket tape packaging for Red, Red-Orange,Amber and Deep Red.
LUXEON Z Datasheet DS105 20120516
22
Emitter Reel Packaging
Figure 24. Emitter reel packaging.
LUXEON Z Datasheet DS105 20120516
23
Luminous Flux Bins
Tables 9 and 10 list the standard photometric luminous flux/radiometric power bins for LUXEON Z colors and LUXEON Z white emitters (tested
and binned at 350 mA and 700 mA respectively). Although several bins are outlined, product availability in a particular bin varies by production run
and by product performance. Not all bins are available in all colors.
Table 9.
LUXEON Z Flux Bins - All Colors andWhite
Bin Code
Minimum Flux (lm)
Maximum Flux (lm)
A
B
24
32
32
40
C
D
E
40
48
56
48
56
64
F
64
72
G
H
J
72
80
88
80
88
96
K
L
96
104
114
124
134
144
154
164
104
114
124
134
144
154
M
N
P
Q
R
Table 10.
LUXEON Z Radiometric Power Bins for Royal-Blue and Deep Red
Bin Code
Minimum Radiometric Flux (mW)
Maximum Radiometric Flux (mW)
A
B
C
D
E
250
300
350
400
450
500
550
600
650
700
750
300
350
400
450
500
550
600
650
700
750
800
F
G
H
I
J
K
LUXEON Z Datasheet DS105 20120516
24
ForwardVoltage Bins
The following forward voltage bins include the minimum and maximumVf bin values for the emitter. Although several bins are outlined, product
availability in a particular bin varies by production run and by product performance.
Table 11. Voltage Bins
Vf Bins
Minimum ForwardVoltage
(V)
Maximum ForwardVoltage
(V)
Bin Code
1
2
3
4
5
6
7
1.75
2.00
2.25
2.50
2.75
3.00
3.25
2.00
2.25
2.50
2.75
3.00
3.25
3.50
LUXEON Z Datasheet DS105 20120516
25
Color Bins
DominantWavelength Bin Structure for LUXEON Z Green
Table 12.
Minimum DominantWavelength
Maximum DominantWavelength
Bin Code
(nm)
520
525
530
535
(nm)
525
530
535
540
1
2
3
4
DominantWavelength Bin Structure for LUXEON Z Cyan
Table 13.
Minimum DominantWavelength
Maximum DominantWavelength
Bin Code
(nm)
490
(nm)
498
1
2
498
508
DominantWavelength Bin Structure for LUXEON Z Blue
Table 14.
Minimum DominantWavelength
Maximum DominantWavelength
Bin Code
(nm)
460
465
470
475
(nm)
465
470
475
480
1
2
3
4
DominantWavelength Bin Structure for LUXEON Z Royal-Blue
Table 15.
Minimum PeakWavelength
Maximum PeakWavelength
Bin Code
(nm)
440
445
450
455
(nm)
445
450
455
460
3
4
5
6
DominantWavelength Bin Structure for LUXEON Z Red
Table 16.
Minimum DominantWavelength
Maximum DominantWavelength
Bin Code
(nm)
620
(nm)
630
4
5
630
640
LUXEON Z Datasheet DS105 20120516
26
DominantWavelength Bin Structure for LUXEON Z Red-Orange
Table 17.
Minimum DominantWavelength
Maximum DominantWavelength
Bin Code
(nm)
(nm)
2
610
620
DominantWavelength Bin Structure for LUXEON Z Amber
Table 18.
Minimum DominantWavelength
Maximum DominantWavelength
Bin Code
(nm)
584
587
590
592
(nm)
587
590
592
595
1
2
4
6
DominantWavelength Bin Structure for LUXEON Z Deep Red
Table 19.
Minimum DominantWavelength
Maximum DominantWavelength
Bin Code
(nm)
650
(nm)
660
6
7
660
670
LUXEON Z Datasheet DS105 20120516
27
Company Information
Philips Lumileds is a leading provider of LEDs for everyday lighting applications. The company’s records for light output,
efficacy and thermal management are direct results of the ongoing commitment to advancing solid-state lighting technology
and enabling lighting solutions that are more environmentally friendly, help reduce CO2 emissions and reduce the need for
power plant expansion. Philips Lumileds LUXEON® LEDs are enabling never before possible applications in outdoor lighting,
shop lighting, home lighting, digital imaging, display and automotive lighting.
Philips Lumileds is a fully integrated supplier, producing core LED material in all three base colors, (Red, Green, Blue) and
white. Philips Lumileds has R&D centers in San Jose, California and in the Netherlands, and production capabilities in
San Jose, Singapore and Penang, Malaysia. Founded in 1999, Philips Lumileds is the high flux LED technology leader and is
dedicated to bridging the gap between solid-state technology and the lighting world. More information about the company’s
LUXEON LED products and solid-state lighting technologies can be found at www.philipslumileds.com.
www.philipslumileds.com
www.philipslumileds.cn.com
www.futurelightingsolutions.com
For technical assistance or the
location of your nearest sales
office contact any of the
following:
North America:
1 888 589 3662
americas@futurelightingsolutions.com
Europe:
00 800 443 88 873
europe@futurelightingsolutions.com
©2012 Philips Lumileds Lighting Company.All rights reserved.
Product specifications are subject to change without notice.
LUXEON is a registered trademark of the Philips Lumileds
Asia Pacific:
800 5864 5337
Lighting Company in the United States and other countries.
asia@futurelightingsolutions.com
Japan:
800 5864 5337
japan@futurelightingsolutions.com
相关型号:
©2020 ICPDF网 联系我们和版权申明