OM1815NMM [ETC]
HERMETIC SURFACE MOUNT FIXED VOLTAGE POSITIVE REGULATORS APPROVED TO DESC DRAWINGS; HERMETIC表面安装固定电压正向调节批准DESC图纸
| 型号： | OM1815NMM |
| 厂家： | 
ETC |
| 描述： | HERMETIC SURFACE MOUNT FIXED VOLTAGE POSITIVE REGULATORS APPROVED TO DESC DRAWINGS |
| 文件： | 总4页 (文件大小：30K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
OM1805NMM OM1815NMM
OM1812NMM
HERMETIC SURFACE MOUNT FIXED VOLTAGE POSITIVE
REGULATORS APPROVED TO DESC DRAWINGS
Three Terminal, Fixed Voltage, 1.5 Amp
Precision Positive Regulators In Hermetic
Surface Mount Package
FEATURES
• Hermetic Surface Mount Package
• Output Voltages: +5V, +12V, +15V
• Output Voltages Set Internally To ±1%
• Built-In Thermal Overload Protection
• Short Circuit Current Limiting
• Hi-Rel Screening Available
DESCRIPTION
These three terminal positive regulators are supplied in a hermetically sealed surface
mount package. All protective features are designed into the circuit including thermal
shutdown, current limiting and safe-area control. With heat sinking, they can deliver
over 1.5 amps of output current. These units feature internally trimmed output
voltages to ±1% of nominal voltage. Standard voltages are +5V, +12V, and +15V.
These units are ideally suited for Military applications where a hermetic surface
mount package is required.
PART NUMBER DESIGNATOR
Standard Military Drawing Number
5962-8778201 NX
Omnirel Part Number
OM1805NMM
5962-8777601 NX
OM1812NMM
5962-8855301 NX
OM1815NMM
3.5
3.5 - 37
4 11 R0
OM1805NMM - OM1815NMM
ABSOLUTE MAXIMUM RATINGS @ 25°C
Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +35 V
Operating Junction Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . - 55°C to + 150°C
Storage Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 65°C to + 150°C
Typical Power/Thermal Charateristics:
Rated Power @ 25° C TC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15W
TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3W
Thermal Resistance
θJC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.5°C/W
θJA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120°C/W
a
ELECTRICAL CHARACTERISTICS 5 Volt VIN = 10V, Io = 500mA, -55°C ≤ TA ≤ 125°C (unless otherwise specified)
Parameter
Symbol
Test Conditions
Min.
4.92
4.85
Max.
5.08
5.15
Unit
Output Voltage
VOUT
TA = 25°C
V
VIN = 7.5V to 20V
IO = 5mA to 1.0A, P < 15 W
VIN = 7.5V to 20V
•
V
Line Regulation
(Note 1)
VRLINE
VRLOAD
ISCD
5
12
4
mV
mV
mV
mV
mV
mV
mV
mV
mA
mA
mA
•
•
•
•
(Note 4)
VIN = 8.0V to 12V
10
12
25
6
Load Regulation
(Note 1)
IO = 5mA to 1.5 Amp
IO = 5mA to 1.0Amp
IO = 250mA to 750 mA
15
6
Standby Current Drain
•
•
6.5
0.8
Standby Current Drain
Change With Line
Standby Current Drain
Change With Load
Dropout Voltage
∆ISCD
(Line)
∆ISCD
(Load)
VDO
VIN = 7.5V to 20V
IO = 5mA to 1000mA
•
0.5
mA
TA = 25°C, ∆VOUT = 100mV, IO = 1.0A
2.5
3.3
1.2
2.8
V
A
Peak Output Current
Short Circuit Current
(Note 2)
IO (pk)
IDS
TA = 25°C
VIN = 35V
1.5
A
•
•
A
Ripple Rejection
∆VIN
∆VOUT
NO
f =120 Hz, ∆VIN = 10V
(Note 3)
68
60
dB
dB
µV/V
RMS
mV
Output Noise Voltage
(Note 3)
TA = 25°C, f =10 Hz to 100KHz
40
75
Long Term Stability
(Note 3)
∆VOUT
∆t
TA = 25°C, t = 1000 hrs.
3.5
Notes:
1. Load and Line Regulation are specified at a constant junction temperature. Pulse testing with low duty cycle is used.
Changes in output voltage due to heating effects must be taken into account separately.
2. Short Circuit protection is only assured up to VIN = 35V.
3. If not tested, shall be guaranteed to the specified limits.
The • denotes the specifications which apply over the full operating temperature range.
4. Minimum load current for full line regulation = 5.0 mA.
3.5 - 38
OM1805NMM - OM1815NMM
ELECTRICAL CHARACTERISTICS 12 Volt VIN = 19V, Io = 500mA, -55°C ≤ TA ≤ 125°C (unless otherwise specified)
Parameter
Symbol
Test Conditions
Min.
11.88
11.64
Max.
12.12
12.36
Unit
Output Voltage
VOUT
TA = 25°C
V
VIN = 14.5V to 27V
IO = 5mA to 1.0 A, P < 15W
VIN = 14.5V to 27V
•
V
Line Regulation
(Note 1)
VRLINE
VRLOAD
ISCD
18
50
9
mV
mV
mV
mV
mV
mV
mV
mV
mA
mA
mA
•
•
•
•
(Note 4)
VIN = 16V to 22V
30
32
60
20
40
6.0
6.5
0.8
Load Regulation
(Note 1)
IO = 5mA to 1.5 Amp
IO = 5mA to 1.0 Amp
I
O = 250mA to 750 mA
Standby Current Drain
•
•
Standby Current Drain
Change With Line
Standby Current Drain
Change With Load
Dropout Voltage
∆ISCD
(Line)
∆ISCD
(Load)
VDO
VIN = 15V to 30V
IO = 5mA to 1000mA
•
•
0.5
mA
∆VOUT = 100mV, IO = 1.0A
TA = 25°C
2.5
3.3
1.2
2.8
V
A
Peak Output Current
Short Circuit Current
(Note 2)
IO (pk)
IDS
1.5
VIN = 35V
A
•
•
A
Ripple Rejection
∆VIN
∆VOUT
NO
f =120 Hz, ∆VIN = 10V
(Note 3)
61
54
dB
dB
µV/V
RMS
mV
Output Noise Voltage
(Note 3)
TA = 25°C, f =10 Hz to 100KHz
40
Long Term Stability
(Note 3)
∆VOUT
∆t
TA = 25°C, t = 1000 hrs.
120
Notes:
1. Load and Line Regulation are specified at a constant junction temperature. Pulse testing with low duty cycle is used.
Changes in output voltage due to heating effects must be taken into account separately.
2. Short Circuit protection is only assured up to VIN = 35V.
3. If not tested, shall be guaranteed to the specified limits.
The • denotes the specifications which apply over the full operating temperature range.
4. Minimum load current for full line regulation = 5.0 mA.
MECHANICAL OUTLINE
CONNECTION
.140
.140
.140
.015
.075
.157
.075
.030
1
2
Pin 1 Input
Pin 2 Output
Pin 3 Ground
3.5
MIN.
3
.415
.062
.375
3.5 - 39
OM1805NMM - OM1815NMM
ELECTRICAL CHARACTERISTICS 15 Volt VIN = 23V, Io = 500mA, -55°C ≤ TA ≤ 125°C (unless otherwise specified)
Parameter
Symbol
Test Conditions
Min.
14.8
14.6
Max.
15.2
15.4
Unit
Output Voltage
VOUT
TA = 25°C
V
VIN = 18.5V to 30V
IO = 5mA to 1.0 A, P < 15W
VIN = 17.5V to 30V
•
V
Line Regulation
(Note 1)
VRLINE
VRLOAD
ISCD
20
50
15
25
35
75
21
45
6.0
6.5
0.8
mV
mV
mV
mV
mV
mV
mV
mV
mA
mA
mA
•
•
•
•
(Note 4)
VIN = 20V to 26V
Load Regulation
(Note 1)
IO = 5mA to 1.5 Amp
IO = 5mA to 1.0 Amp
IO = 250mA to 750 mA
Standby Current Drain
•
•
Standby Current Drain
Change With Line
Standby Current Drain
Change With Load
Dropout Voltage
∆ISCD
(Line)
∆ISCD
(Load)
VDO
VIN = 18.5V to 30V
IO = 5mA to 1000mA
•
0.5
mA
TA = 25°C, ∆VOUT = 100mV, IO = 1.0A
2.5
3.3
1.2
2.8
V
A
Peak Output Current
Short Circuit Current
(Note 2)
IO (pk)
IDS
TA = 25°C
VIN = 35V
1.5
A
•
•
A
Ripple Rejection
∆VIN
∆VOUT
NO
f =120 Hz, ∆VIN = 10V
(Note 3)
54
52
dB
dB
µV/V
RMS
mV
Output Noise Voltage
(Note 3)
TA = 25°C, f =10 Hz to 100KHz
40
Long Term Stability
(Note 3)
∆VOUT
∆t
TA = 25°C, t = 1000 hrs.
150
Notes:
1. Load and Line Regulation are specified at a constant junction temperature. Pulse testing with low duty cycle is used.
Changes in output voltage due to heating effects must be taken into account separately.
2. Short Circuit protection is only assured up to VIN = 35V.
3. If not tested, shall be guaranteed to the specified limits.
The • denotes the specifications which apply over the full operating temperature range.
4. Minimum load current for full line regulation = 5.0 mA.
TYPICAL PERFORMANCE CHARACTERISTICS
2.5
2
100
80
3.5
3
Tj = -55°C
VOUT = 5V
IOUT = 1A
2.5
1.5
1
60
40
20
0
2
IOUT = 500mA
Tj = 25°C
3.5
1.5
IOUT = 0A
VIN - V = 8VDC +3.5Vrms
1
IOUT = 1A
Tj = 25°C
0.5
Tj = 150°C
∆VOUT = 100MV
0.5
0
∆VOUT = 100mV
0
-75-50 -25
0
2 5 5 0 7 5 100 125150
0
5
10 15 20 25 30 35
10
100
1k
10k
Input To Output Differential (V)
Junction Temperature (°C)
Frequency (Hz)
相关型号：
OM183-12SC
Fixed Positive LDO Regulator, 12V, 13.5V Dropout, BIPolar, MSFM3, ISOLATED, TO-258, 3 PIN
INFINEON
OM183-15SC
Fixed Positive LDO Regulator, 15V, 17.5V Dropout, BIPolar, MSFM3, ISOLATED, TO-258, 3 PIN
INFINEON
OM183-5SC
Fixed Positive LDO Regulator, 5V, 6.5V Dropout, BIPolar, MSFM3, ISOLATED, TO-258, 3 PIN
INFINEON
©2020 ICPDF网 联系我们和版权申明