PA11-MCALI-80043-350 [ETC]
MANOMETER MIKROPROZSTEUER 0 BIS 350BAR ; 压力计MIKROPROZSTEUER 0 BIS 350BAR\n型号: | PA11-MCALI-80043-350 |
厂家: | ETC |
描述: | MANOMETER MIKROPROZSTEUER 0 BIS 350BAR
|
文件: | 总2页 (文件大小:134K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
KELLER
INTELLIGENT DIGITAL MANOMETERS
MANO GAUGE / MANO RECORD
MANO CALI
This is a highly accurate microprocessor-controlled pressure measuring instrument. SensoBrainTM, a KELLER-designed low power signal
processor, transmits the signals of the pressure- and temperature sensor to the microprocessor, which digitally compensates the sensor data.
This mathematical modelling of the pressure sensor virtually eliminates all errors over a wide temperature range.
All KELLER- and KAVLICO-sensors are compatible with the electronics of the Intelligent Manometers.
MANO GAUGE (Basic Version)
Display of:
Alternative:
Pressure, Pressure Unit, Temperature, Elapsed Time
Pressure, Pressure Unit, Max.- and Min. Value
All functions are executed with the front key of the instrument. It allows the display
to be set to zero and to change the measuring cycle for prolonged battery life.
Two pressure sensors can be connected to the MANO GAUGE (optional).
Analog outputs can be provided 4…20 mA or 0…10 V (optional).
MANO RECORD (MANO GAUGE plus data recording)
Based on the MANO GAUGE, the MANO RECORD records and stores the measured
values. The front key is used to select which data shall be displayed and stored,
and to set the recording interval and the number of readings (memory for 960 or
optionally 8100 readings). The read-out of the stored data is via RS 232 serial
interface (Logger Software and K101 cable available as option).
MANO CALI (CALIBRATOR VERSION plus data recording)
In the basic mode, the MANO CALI displays: Pressure, Pressure Unit, Max.- and Min. Values.
Units are selected via the front key (bar, PSI, kPa, MPa,…). MANO CALI also incorporates the
functions TARA (sets a new temporary zero reference), LEAK (measures a pressure change
over a programmable time) and RES (reduces the standard resolution by factor 10).
A seperate HOLD-key on the instrument freezes the reading. This instrument has the same
data recording features as the MANO RECORD.
HOLD-Key
(Mano Cali
only)
ø 76 mm
KELLER
KELLER
KELLER
Front Key
Button
ø 45
HEX 27
HEX 19
G 1/4"
G 1/4"
G 1/4"
Integrated Capacitive Cell
(30 mbar…1 bar)
Series 11 Transducer
(1…10 bar / -1…2 bar / -1…1000 bar)
Series 6 Transducer
(10…600 bar)
Subject to alterations
3/98
KELLER AG für Druckmesstechnik
KELLER Gesellschaft für druckmesstechnik mbH
St. Gallerstrasse 119
Schwarzwaldstrasse 17
CH-8404 Winterthur
D-79798 Jestetten
Tel. 052 - 232 11 26
Tel. 07745 - 9214 - 0
Fax 052 - 232 70 67
Fax 07745 - 9214 - 50
Companies approved to ISO 9001 / EN 29001
Internet: http://www.keller-druck.ch
KELLER
SPECIFICATIONS
MANO GAUGE / MANO RECORD
Vented Gauge or Absolute Sealed Gauge or Absolute
MANO CALI
Sealed or Vented Gauge
In MANO GAUGE and MANO RECORD the
measuring ranges are divided by 12 bit
or 3000 points. In MANO CALI over 13
bit or 6000 points.
Range
Resolution
0,01 mbar
0,1 mbar
0,3 mbar
1 mbar
Range
Resolution
Range
Resolution
0,5 mbar
1,8 mbar
4,3 mbar
0,03 bar
0,05 bar
0,1 bar
30 mbar
300 mbar
1000 mbar
-1…2 bar
10 bar
-1…2 bar
-1…10 bar
-1…25 bar
200 bar
100 bar
300 bar
600 bar
1000 bar
0,03 bar
0,1 bar
0,2 bar
0,3 bar
The resolution is determined by the
measuring range and the number of
measuring points.
3 mbar
350 bar
30 bar
10 mbar
700 bar
• Specific Characteristics
Total Accuracy (1)
• Environmental Characteristics
MANO GAUGE / RECORD
MANO CALI
0,05 % typ.
0,1% max.
2
Operating Temperature
Compensated Range (5)
Storage Temperature
Display (5)
°C
°C
°C
°C
- 10…60
0…50
Range 0…50°C
± 0,1% typ.
± 0,2% max.
1
- 30…80
0…50
Measuring Interval (2)
sec
(1)
(5)
Includes linearity, repeatability, hysteresis, temperature and resolution of the display
x 2 for two transducers (not for MANO CALI)
others upon request
(2)
• Mechanical Characteristics
Manometer Housing
Transducer
• Electrical Characteristics
Supply
Polyamid 12
Lithium-Battery 3,6 V (included)
> 200 days at continuous operation (4)
See data sheet of transducer
approx. 250 g
Battery-Life
Total Weight
Output Signal (optional)
- Analog (3) (MANO RECORD / GAUGE) 4..20 mA or 0..10 V
Pressure Connection
Protection
See data sheet of transducer
IP 65
- Numerical (MANO RECORD / CALI)
RS 232
(3)
(4)
The use of an analog signal requires an external supply between 10…28 VDC
> 100 days for MANO CALI
• Options (on request)
- Manometer Housing in Metal*
- 1 or 2 external Transducers (remote)*
- Transmitter Output Connector*
- Special Programs
- Logger Software and K101 Cable
- Intrinsically Safe Version (EEx-ia)*
* only MANO RECORD and MANO GAUGE
LOGGER
The Logger-Software allows the read-out of the stored
data from the Intelligent Manometer. The data transfer
takes place via the serial interface on the PC.
The MANO RECORD / MANO CALI is connected through a
cable K101 (supplied with Logger software).
The LOGGER-software offers many further processing
possibilities of the read-out data, and meets all the
requirements of modern Windows-Software:
- Graphical Display
- Tabulated Display
- Export into other Windows-Programs
- Storage into Files
Subject to alterations
3/98
KELLER AG für Druckmesstechnik
KELLER Gesellschaft für druckmesstechnik mbH
St. Gallerstrasse 119
Schwarzwaldstrasse 17
CH-8404 Winterthur
D-79798 Jestetten
Tel. 052 - 232 11 26
Tel. 07745 - 9214 - 0
Fax 052 - 232 70 67
Fax 07745 - 9214 - 50
Companies approved to ISO 9001 / EN 29001
Internet: http://www.keller-druck.ch
相关型号:
©2020 ICPDF网 联系我们和版权申明