PLED96W-020 [ETC]
Flicker-Free LED Drivers;
ETC 
PLED-96W Series– Fixed Output & Dimmable
Flicker-Free LED Drivers
Constant Current & Constant Voltage with Isolation
Black Magic Thermal Advantage™ Aluminum Housing
Electrical Specifications
Input Voltage Range:
Input Over-Voltage:
Frequency:
100-277 Vac Nom. (90-305 V Min/Max)
Can endure 320Vac for 48 Hrs, 350Vac for 2 Hrs
50/60 Hz Nom. (47-63 Hz Min/Max)
>0.90 @ 60-100% load, 100-277Vac
<50.0 Amps max @ 230Vac, cold start 25ºC
1.30 Amps max
Power Factor:
Inrush Current:
Input Current:
Maximum Power:
Current Accuracy:
Load Regulation:
THD:
96W
± 2% Over input line variation
± 3%
• UL Type HL Rated for
Hazardous Materials
• UL Sign Components Manual
(S.A.M. Models)
• Total Power: 96 Watts
• Input Voltage: 100-277 Vac Nom.
• UL Dry & Damp Location Rated
• IP66 & NEMA6
<_ 20% @ 60-100% load, 100-277Vac
Ripple & Noise:
(Vpk-pk)
5% Vo max @ 20 MHz BW, Full load output
in parallel with 0.1 μF ceramic & 10 μF Electrolytic
Constant Current Versions - Specifications
Ripple:
(Ipk-pk)
5% Io max @ 20 MHz BW, Full load output
in parallel with 0.1 μF ceramic & 10 μFElectrolytic.
120 Hz component (Flicker Free)
Output Current Output Voltage Max. Output
Max
Model Number
Efficiency
(mA ±3%)
350
Range (Vdc)
92-274
71-213
46-137
31-92
23-69
18-54
16-48
16-46
14-39
12-36
12-34
10-30
9-27
Power (W)
95.9
95.6
95.9
96
Start-up Time:
200mS typical @ Full Load, 120Vac/60Hz (1000mS max)
0.28 mA max @ 120Vac, 0.78 mA max @ 277Vac
40mS typical @ Full Load, 277Vac
PLED96W-274-C0350-XX
PLED96W-213-C0450-XX
PLED96W-137-C0700-XX
PLED96W-092-C1050-XX
PLED96W-069-C1400-XX
PLED96W-054-C1750-XX
PLED96W-048-C2000-XX
PLED96W-046-C2100-XX
PLED96W-039-C2450-XX
PLED96W-036-C2660-XX
PLED96W-034-C2800-XX
PLED96W-030-C3150-XX
PLED96W-027-C3500-XX
PLED96W-025-C3840-XX
PLED96W-024-C4000-XX
PLED96W-020-C4800-XX
PLED96W-018-C5350-XX
92%
92%
92%
91%
91%
91%
90%
90%
89%
89%
89%
89%
88%
88%
88%
87%
86%
450
Leakage Current:
Hold Up Time:
700
1050
1400
1750
2000
2100
2450
2660
2800
3150
3500
3840
4000
4800
5350
Output Protection:
Over-Voltage, Over-Current, and
Short Circuit Protection with Auto Recovery
96
94.5
96
Environmental Specifications
Minimum Starting Temp: -30ºC
96
95.5
95.7
95.2
94.8
94.5
96
Maximum Case Temp.
Storage Temperature:
Humidity:
90°C
-40ºC to +85ºC
5% to 95%
Convection
5 to 55 Hz/2g, 30 minutes
Class A
Cooling:
Vibration Frequency:
Sound Rating:
Impact Resistance:
MTBF:
9-25
8-24
96
7-20
96
1g/s
6-18
96
474,000 Hours @ full load and 40ºC ambient conditions
per MIL-217F Notice 2
-XX indicates dimming options are available. See options below. Blank = fixed current output
EMC:
FCC 47CFR Part 15 Class B compliant
21.6 oz. (612 grams)
Constant Voltage Versions - Specifications
Weight:
Output Voltage Output Current Max. Output
Max
Model Number
Efficiency
(Vdc ±5%)
Range (mA)
1338-5350
1200-4800
1000-4000
960-3840
875-3500
788-3150
700-2800
665-2660
613-2450
525-2100
500-2000
438-1750
350-1400
263-1050
175-700
Power (W)
PLED96W-018
PLED96W-020
PLED96W-024
18
96
86%
87%
Ordering Options:
20
96
-D: 0-10V & Resistance dimmable models dim 100-10%. Two extra wires on the output
24
96
88%
side (+Purple/-Gray). Compatible with most quality 0-10V wall dimmers. See page 3.
•
PLED96W-025
PLED96W-027
PLED96W-030
PLED96W-034
PLED96W-036
PLED96W-039
PLED96W-046
PLED96W-048
PLED96W-054
PLED96W-069
PLED96W-092
PLED96W-137
PLED96W-213
PLED96W-274
25
96
88%
-D3: 3-wire dimmable models dim 100-10%. Three extra wires on the output side
27
94.5
94.8
95.2
95.7
95.5
96
88%
(Yellow/Purple/Gray). Compatible with potentiometer dimming. See page 3.
30
89%
-PD: PWM Dimmable models. Two extra wires on the output side(+Purple/-Gray). Dims
via positive 10% to 100% Duty Cycle, 200Hz to 1KHz, 0-10V Pulse. See page 4.
34
89%
36
89%
39
89%
46
90%
48
96
90%
54
94.5
96
91%
E332160
69
91%
92
96
91%
137
213
274
95.9
95.6
95.9
92%
113-450
92%
88-350
92%
•
Indicates S.A.M.
Note:
LED drivers are designed and intended to operate LED loads only.
Non-LED loading may be outside the specified design limits of our
LED drivers, and therefore cannot be covered by any warranty.
If you desire to use our LED drivers to operate non-LED loads
please contact us to discuss compatibility.
Class 2:
US/Canada
US Only
Specifications subject to change without notice.
Rev 9-11-15
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
PLED96W Series
SSL Solutions Faster Than The Speed Of Light®
Pg 2 of 4
Dimensions - IN [mm]
[
]
6.4±0.047 162±1.2
[ ]
0.236 6
[ ]
0.236 6
[ ]
0.16 4
[
]
2.24±0.12 57.0±3
[
]
2.24±0.12 57.0±3
WIRE SPECS:
Input Leads: 18 AWG, rated 600 V, 105C, min.
Output Leads: 18 AWG, rated 300 V, 105C, min.
Dimming Leads: 22 AWG, rated 300 V, 105C.
All wires are stranded with solder dipped ends.
[
]
]
6.0 152
[
6.8 172
Tc = 90°C max
[
]
[
]
[
]
12.0 Min 305 Min
2.50 63.5
12.0 Min 305 Min
[
]
2.33 59.2
Dimming
Purple (Dim+)
Gray (Dim-)
[
]
0.39±0.04 10±1
[
]
0.39±0.04 10±1
INPUT
Black (ACL)
OUPUT
Red (V+)
Blue (V-)
White (ACN)
Green/Yellow (GND)
Typical Efficiency / Load
Power Factor / Load
THD / Load
1.000
0.950
0.900
0.850
0.800
0.750
30%
100%
95%
90%
85%
80%
75%
70%
25%
20%
15%
10%
5%
120Vac
230Vac
277Vac
120Vac
230Vac
277Vac
120Vac
230Vac
277Vac
0.700
40%
0%
40%
60%
80%
100%
60%
80%
100%
40%
60%
80%
100%
Normalized Output Voltage
Load
Load
Lifetime / Case Temperature
Safety and EMC Compliance
Full Load @ 120Vac
UL8750 & CAN/CSA-22.2 No. 250.13-12, UL1310/CSA-C22.2 No.223-M91,
UL1012/CSA-C22.2 No.107.1 for Non-Class 2
140
130
120
110
100
90
UL/CUL
CE
EN 61347-1, EN61347-2-13
FCC, 47CFR Part 15 Class B
Limits and methods of measurement of radio disturbance characteristics
EN 55015
80
70
of electrical lighting and similar equipment.
EN 61000-3-2
EN 61000-3-3
EN 61000-4-5
Part 3-2: Limits for harmonic current emissions Class C, >80% Rated Power
Part 3-3: Limitation of voltage changes, voltage fluctuations and flicker.
Part 4-5: Surge Immunity test, 2 kV L-N, 4 kV L-G & N-G
60
50
40
30
20
10
0
50
55
60
65
70
75
80
85
90
Case Hotspot Temperature (°C)
Note:
Life calculations are based on reliability with confidence using
a 90% confidence level and <5% failure rate. At a confidence
level of 90% it is expected that <5% of the parts will fail at
the rated life provided. (Failure is defined as a driver drifting
outside specification, rather than fail to operate)
UL Conditions of Acceptability
See website for additional information
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
PLED96W Series
SSL Solutions Faster Than The Speed Of Light®
Pg 3 of 4
"-D" and "-D3" Options: 0-10VDC and Resistance Dimming
Parameters
10V Output, Yellow Wire
Minimum
9.2V
Typical
10.0V
—
Maximum
10.8V
10 Output Source Current, Yellow Wire
Absolute Voltage Range on 0-10V (+) Purple Wire
Source Current out of 0-10V Purple Wire
0mA
10mA
-2.0V
—
+15V
0mA
—
2mA
Typical Dimming Circuit
3-Wire Dimming Typical Circuit
10V Output (Yellow)
Dim (+) Purple
0-10V Input (Purple)
Return (Gray)
20K
Potentiometer
PLED96W-xxx-Cxxxx-D
IP710 Wall Dimmer
Dim (-) Gray
PLED96W-xxx-Cxxxx-D3
(Dimmer must be current-sink type control)
Output Current / 0-10VDC Dimming Input
100
90
80
70
60
50
40
30
20
10
0
0V
1V
2V
3V
4V
5V
6V
7V
8V
9V
10V
Dimming Input (Vdc)
Notes:
1. 0-10V dimmable version comes with an extra two wires +Purple/-Gray on the output side.
2. Compatible with most 0-10V Wall Slide dimmers and direct 0-10V analog signal. Recommended dimmer is Leviton IP710 or equivalent
3. 0-10V dimmable version is not intended to dim below about 5% @ 0V or 10% @ 1.0V
4. 0-10V dimmable version output will be 100% with Purple/Gray open and minimum with Purple/Gray Shorted.
5. 3-wire dimmable drivers come with three wires on the output side (Yellow/Purple/Gray).
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
PLED96W Series
SSL Solutions Faster Than The Speed Of Light®
Pg 4 of 4
"-PD" Option: PWM Dimming
Parameters
Minimum
-2.0V
-2.0
Typical
10V
Maximum
+28V
Absolute Maximum Voltage Range on PWM Input (Purple Wire)
Input LOW Level Voltage Range (Purple Wire)
Input HIGH Level Voltage Range (Purple Wire)
Sink Current into PWM Input (Purple Wire)
PWM Input Signal Frequency
0V
+7.5V
+9.0
10V
28V
0mA
—
1.2mA
1000Hz
100%
200Hz
0%
—
PWM Input Signal Positive Duty Cycle
10-90%
PWM Positive Dimming Typical Circuit
PWM (+) Purple
PLED96W-xxx-Cxxxx-PD
PWM In
PWM (-) Gray
Output Current / 1.0 kHz Positive Duty Cycle
100
90
80
70
60
50
40
30
20
10
0
0%
10%
20%
30%
40%
50%
60%
70%
80%
90% 100%
Positive Duty Cycle
Notes:
1. PWM Dimmable version comes with an extra 2 wires +Purple/-Gray on the output side.
2. Below 10% Duty cycle proper dimming operation is not assured. Unit is not intended to turn off at <10% Duty Cycle.
3. PWM dimmable version output will be 100% with Purple/Gray open and minimum with Purple/Gray Shorted.
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
相关型号：
©2020 ICPDF网 联系我们和版权申明