PLL2026E [ETC]
LENS CLR 30DEG MEDIUM SCREW;
| 型号： | PLL2026E |
| 厂家： | 
ETC |
| 描述： | LENS CLR 30DEG MEDIUM SCREW |
| 文件： | 总3页 (文件大小：1545K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TECHNICAL DEPT.
Lenses Test Report
PLL2026E - 30°FWHM - Designed to comply with Zhaga Book 7
•
Material = PMMA Clear
•
•
•
Full angle C0-C180 at 50% from maximum: ~ 30°
Full angle C0-C180 at 10% from maximum: ~ 60°
The light spots here represented refer to tests carried out with
22 ꢀ/ꢁ Watt LEDs, 5.6x3mm size, ~ 1100lm@Strip
www.khatod.com
technical@khatod.com
Page 6 - August 2017
TECHNICAL DEPT.
Lenses Test Report
Assembly Specification
Example:
Assembly using common Strip LEDs
Maximum width: 24.0 mm
Screws or Press Fit
•
•
•
Use TCEI M3 screws
Use Press Fit
Maximum tightening torque: 0.48 Kn
Lens
Profile
PCB + LEDS
Example:
Screws or Press Fit
Assembly using Strip LEDs complying with Zhaga Book 7
Maximum width: 40.0 mm
•
•
•
Use TCEI M3 screws
Use Press Fit
Maximum tightening torque: 0.48 Kn
Lens
Profile
Strip LEDs complying with Zhaga Book 7
www.khatod.com
technical@khatod.com
Page 10 - August 2017
TECHNICAL DEPT.
Lenses Test Report
Materials
Material
PMMA 8N
Top
-40°.....90°C
For further information please visit Evonik website
Notes:
•
Intensity (I) and illuminance (E) data are normalized by 1000 lm
•
The optical values shown are the result of optical simulations carried out with LIGHTOOLS, ASAP and ZEMAX
software systems. The optical simulations are carried out on the basis of the typical values provided in the LED
manufacturers’ official datasheets. The photometric analysis has been carried out on physical samples.
On request, by supplying your PCB, we can provide the measurement photometric file.
Use and Maintenance
•
DO NOT HANDLE OR INSTALL LENSES WITHOUT WEARING GLOVES, SKIN OILS MAY DAMAGE
LENS OR LIGHT TRANSMISSION;
•
•
CLEAN LENSES WITH MILD SOAP AND WATER AND A SOFT CLOTH;
DO NOT USE ANY COMMERCIAL CLEANING SOLVENTS ON LENSES.
Disclaimer
Please note that flow lines and weld lines on the external surfaces of the lenses are acceptable if the optical performance
of the lens is within the specifications.
Should you require further information, please contact Khatod for advice. All lens testing must be subject to identical
conditions as Khatod test condition. Khatod Optoelectronic, Milan, Italy, manufactures lenses for LEDs. Any other use
of the lens shall void our liability and warranty. The lenses are an inert component to be used in the manufacture of
various products. Our warranty and liability are limited only to the manufacture of the lens. You may not modify, copy,
distribute reproduce, license or alter the lens and related materials of Khatod. Khatod does not warrant against damages
or defects arising out of the use or misuse of the products; against defects or damage arising from improper installation,
or against defects in the product or in its components. No warranty of any kind, expressed or implied, is made regarding
the safety of the products. The entire risk as to the quality or performance of the product is with the buyer. In no event
shall Khatod be liable for any direct, indirect, punitive, incidental, special, consequential damages, or any damages
whatsoever arising out of or connected with the use or misuse of the product. Khatod shall not have any obligation with
respect to the product or any part thereof, whether based on contract, tort, strict liability or otherwise. Buyer assumes
all risks and liability from use of the product. The laws of Milan, Italy govern this product warranty and liability and
you hereby consent to the exclusive jurisdiction and venue of courts in Milan, Italy in all disputes arising out of or
relating to the use of this product. Production, marketing, distribution, sale of these products as well as their possible
modifications and variations are only exclusive right of Khatod Optoelectronic. No company can perform any of these
actions without written permission released by Khatod Optoelectronic. The information contained in this document is
proprietary of Khatod Optoelectronic and may change without notice.
REPRODUCTION PROHIBITED.
www.khatod.com
technical@khatod.com
Page 11 - August 2017
相关型号：
©2020 ICPDF网 联系我们和版权申明