PNZ109F(PN109F) [ETC]

PNZ109F (PN109F) - Silicon NPN Phototransistor ; PNZ109F （ PN109F ） - 硅NPN光电晶体管\n


型号：	PNZ109F(PN109F)
厂家：	ETC
描述：	PNZ109F (PN109F) - Silicon NPN Phototransistor PNZ109F （ PN109F ） - 硅NPN光电晶体管\n 晶体光电晶体管光电晶体管
文件：	总3页 (文件大小：289K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Phototransistors

PNZ109F (PN109F)

Silicon NPN Phototransistor

Unit : mm

ø4.6±0.15

Glass window

For optical control systems

Features

Flat window design which is suited to optical systems

Built-in filter to cutoff visible light for reducing ambient light noise

3-ø0.45±0.05

2.54±0.25

Peak sensitivity wavelength matched with infrared light emitting

devices : λ_p= 900 nm (typ.)

Fast response : t_r= 8 µs (typ.)

1.0

0.2

Long lifetime, high reliability

0.15

3˚

1.0

Absolute Maximum Ratings (Ta = 25˚C)

1: Emitter

2: Base

3: Collector

Parameter

Symbol

V_CEO

V_CBO

V_ECO

V_EBO

I_C

Ratings

Unit

ø5.75 max.

Collector to emitter voltage

Collector to base voltage

Emitter to collector voltage

Emitter to base voltage

Collector current

˚C

Collector power dissipation

Operating ambient temperature

Storage temperature

P_C

150

T_opr

–25 to +85

–30 to +100

T_stg

Electro-Optical Characteristics (Ta = 25˚C)

Parameter

Dark current

Symbol

I_CEO

I_CE(L)

λ_P

Conditions

min

typ

max

Unit

µA

V_CE= 10V

0.05

Collector photo current

Peak sensitivity wave length

Acceptance half angle

Rise time

V_CE= 10V, L = 100 lx^*1

0.3

V_CE= 10V

900

t_r^*2

Measured from the optical axis to the half power point

V_CC= 10V, I_CE(L)

deg.

µs 1mA

Fall time

t_f^*2

R_L= 100Ω

µs

Collector saturation voltage

V_CE(sat)I_CE(L)= 1mA, L = 1000 lx^*1

0.3

0.6

^*1Measurements were made using a tungsten lamp (color temperature T = 2856K) as a light source.

^*2Switching time measurement circuit

Sig.IN

V_CC

t_d: Delay time

(Input pulse)

t_r: Rise time (Time required for the collector photo current to

increase from 10% to 90% of its final value)

90%

10%

Sig.OUT

(Output pulse)

t_d

t_f: Fall time (Time required for the collector photo current to

decrease from 90% to 10% of its initial value)

50Ω

R_L

t_r

t_f

Note) The part number in the parenthesis shows conventional part number.

Phototransistors

PNZ109F

P_C— Ta

I_CE(L)— V_CE

I_CE(L)— L

200

160

120

V_CE= 10V

Ta = 25˚C

T = 2856K

10 ³

Ta = 25˚C

T = 2856K

900 lx

800 lx

700 lx

L = 1000 lx

10 ²

600 lx

500 lx

400 lx

300 lx

200 lx

10 ^–1

10 ^–2

100 lx

50 lx

10 lx

– 20

100

10 ²

10 ³

10 ⁴

Ambient temperature Ta (˚C )

Collector to emitter voltage V_CE(V)

Illuminance L (lx)

I_CEO— Ta

I_CE(L)— Ta

Spectral sensitivity characteristics

10 ²

100

V_CE= 10V

L = 100 lx

T = 2856K

V_CE= 10V

Ta = 25˚C

V_CE= 10V

10 ^–1

10 ^–2

10 ^–3

10 ^–1

– 40

– 20

100

120

600 700 800 900 1000 1100 1200

Ambient temperature Ta (˚C )

Wavelength λ (nm)

Directivity characteristics

t_r— I_CE(L)

t_f— I_CE(L)

0˚

100

10˚

20˚

V_CC= 10V

Ta = 25˚C

V_CC= 10V

Ta = 25˚C

10 ⁴

10 ³

10 ⁴

30˚

40˚

10 ³

10 ²

R_L= 1kΩ

500Ω

R_L= 1kΩ

500Ω

50˚

60˚

100Ω

70˚

80˚

90˚

10 ^–1

10 ^–2

10 ^–1

10 ²

10 ^–2

10 ^–1

10 ²

Collector photo current I_CE(L)(mA)

Request for your special attention and precautions in using the technical information

and semiconductors described in this material

(1) An export permit needs to be obtained from the competent authorities of the Japanese Govern-

ment if any of the products or technologies described in this material and controlled under the

"Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan.

(2) The technical information described in this material is limited to showing representative character-

istics and applied circuit examples of the products. It does not constitute the warranting of industrial

property, the granting of relative rights, or the granting of any license.

(3) The products described in this material are intended to be used for standard applications or gen-

eral electronic equipment (such as office equipment, communications equipment, measuring in-

struments and household appliances).

Consult our sales staff in advance for information on the following applications:

• Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment,

combustion equipment, life support systems and safety devices) in which exceptional quality and

reliability are required, or if the failure or malfunction of the products may directly jeopardize life or

harm the human body.

• Any applications other than the standard applications intended.

(4) The products and product specifications described in this material are subject to change without

notice for reasons of modification and/or improvement. At the final stage of your design, purchas-

ing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to

make sure that the latest specifications satisfy your requirements.

(5) When designing your equipment, comply with the guaranteed values, in particular those of maxi-

mum rating, the range of operating power supply voltage and heat radiation characteristics. Other-

wise, we will not be liable for any defect which may arise later in your equipment.

Even when the products are used within the guaranteed values, redundant design is recommended,

so that such equipment may not violate relevant laws or regulations because of the function of our

products.

(6) When using products for which dry packing is required, observe the conditions (including shelf life

and after-unpacking standby time) agreed upon when specification sheets are individually exchanged.

(7) No part of this material may be reprinted or reproduced by any means without written permission

from our company.

Please read the following notes before using the datasheets

A. These materials are intended as a reference to assist customers with the selection of Panasonic

semiconductor products best suited to their applications.

Due to modification or other reasons, any information contained in this material, such as available

product types, technical data, and so on, is subject to change without notice.

Customers are advised to contact our semiconductor sales office and obtain the latest information

before starting precise technical research and/or purchasing activities.

B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but

there is always the possibility that further rectifications will be required in the future. Therefore,

Panasonic will not assume any liability for any damages arising from any errors etc. that may ap-

pear in this material.

C. These materials are solely intended for a customer's individual use.

Therefore, without the prior written approval of Panasonic, any other use such as reproducing,

selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited.

2001 MAR

相关型号：