PNZ109L(PN109L) [ETC]
PNZ109L (PN109L) - Silicon NPN Phototransistor ; PNZ109L （ PN109L ） - 硅NPN光电晶体管\n
| 型号： | PNZ109L(PN109L) |
| 厂家： | 
ETC |
| 描述： | PNZ109L (PN109L) - Silicon NPN Phototransistor
|
| 文件： | 总3页 (文件大小：56K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Phototransistors
PNZ109L (PN109L)
Silicon NPN Phototransistor
Unit : mm
ø4.6±0.15
Glass lens
For optical control systems
Features
High sensitivity : ICE(L) = 3.5 mA (min.) (at L = 100 lx)
Built-in filter to cutoff visible light for reducing ambient light noise
3-ø0.45±0.05
2.54±0.25
Peak sensitivity wavelength matched with infrared light emitting
devices : λp = 900 nm (typ.)
Fast response : tr = 5 µs (typ.)
1.0
±
0.2
Long lifetime, high reliability
45
±
0.15
3˚
±
1.0
3
2
1
Absolute Maximum Ratings (Ta = 25˚C)
1: Emitter
2: Base
2: Collector
Parameter
Symbol
VCEO
VCBO
VECO
VEBO
IC
Ratings
Unit
V
ø5.75 max.
Collector to emitter voltage
Collector to base voltage
Emitter to collector voltage
Emitter to base voltage
Collector current
20
30
V
3
V
5
30
V
mA
mW
˚C
˚C
Collector power dissipation
Operating ambient temperature
Storage temperature
PC
150
Topr
–25 to +85
–30 to +100
Tstg
Electro-Optical Characteristics (Ta = 25˚C)
Parameter
Dark current
Symbol
ICEO
ICE(L)
λP
Conditions
min
typ
max
Unit
µA
VCE = 10V
0.05
2
Collector photo current
Peak sensitivity wavelength
Acceptance half angle
Rise time
VCE = 10V, L = 100 lx*1
3.5
mA
nm
VCE = 10V
900
10
θ
tr*2
Measured from the optical axis to the half power point
VCC = 10V, ICE(L)
deg.
=
µs 5mA5
Fall time
tf*2
RL = 100Ω
6
µs
Collector saturation voltage
VCE(sat) ICE(L) = 1mA, L = 500 lx*1
0.3
0.6
V
*1 Measurements were made using a tungsten lamp (color temperature T = 2856K) as a light source.
*2 Switching time measurement circuit
Sig.IN
VCC
td : Delay time
(Input pulse)
tr : Rise time (Time required for the collector photo current to
increase from 10% to 90% of its final value)
90%
10%
Sig.OUT
(Output pulse)
td
tf : Fall time (Time required for the collector photo current to
decrease from 90% to 10% of its initial value)
50Ω
RL
tr
tf
Note) The part number in the parenthesis shows conventional part number.
1
Phototransistors
PNZ109L
PC — Ta
ICE(L) — VCE
ICE(L) — L
200
160
120
80
20
16
12
8
Ta = 25˚C
T = 2856K
VCE = 10V
Ta = 25˚C
T = 2856K
10 3
500 lx
300 lx
200 lx
1000 lx
10 2
10
100 lx
1
50 lx
10 –1
10 –2
40
4
L = 10 lx
20
0
– 20
0
0
20
40
60
80
100
0
4
8
12
16
24
1
10
10 2
10 3
10 4
Ambient temperature Ta (˚C )
Collector to emitter voltage VCE (V)
Illuminance L (lx)
ICEO — Ta
ICE(L) — Ta
Spectral sensitivity characteristics
10 2
10
10 2
100
80
60
40
20
0
VCE = 10V
L = 100 lx
T = 2856K
VCE = 10V
Ta = 25˚C
VCE = 10V
1
10
10 –1
10 –2
10 –3
1
– 40
– 20
0
20
40
60
80
100
0
40
80
120
600 700 800 900 1000 1100 1200
Ambient temperature Ta (˚C )
Ambient temperature Ta (˚C )
Wavelength λ (nm)
Directivity characteristics
tr — ICE(L)
tf — ICE(L)
0˚
100
10˚
20˚
VCC = 10V
Ta = 25˚C
VCC = 10V
Ta = 25˚C
10 4
10 3
10 4
90
80
70
60
50
40
30
30˚
40˚
10 3
10 2
10
10 2
10
RL = 1kΩ
500Ω
RL = 1kΩ
500Ω
50˚
60˚
100Ω
100Ω
70˚
80˚
90˚
1
1
10 –1
10 –1
10 –2
10 –1
1
10
10 2
10 –2
10 –1
1
10
10 2
Collector photo current ICE(L) (mA)
Collector photo current ICE(L) (mA)
2
Request for your special attention and precautions in using the technical information
and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Govern-
ment if any of the products or technologies described in this material and controlled under the
"Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan.
(2) The technical information described in this material is limited to showing representative character-
istics and applied circuit examples of the products. It does not constitute the warranting of industrial
property, the granting of relative rights, or the granting of any license.
(3) The products described in this material are intended to be used for standard applications or gen-
eral electronic equipment (such as office equipment, communications equipment, measuring in-
struments and household appliances).
Consult our sales staff in advance for information on the following applications:
• Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment,
combustion equipment, life support systems and safety devices) in which exceptional quality and
reliability are required, or if the failure or malfunction of the products may directly jeopardize life or
harm the human body.
• Any applications other than the standard applications intended.
(4) The products and product specifications described in this material are subject to change without
notice for reasons of modification and/or improvement. At the final stage of your design, purchas-
ing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to
make sure that the latest specifications satisfy your requirements.
(5) When designing your equipment, comply with the guaranteed values, in particular those of maxi-
mum rating, the range of operating power supply voltage and heat radiation characteristics. Other-
wise, we will not be liable for any defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, redundant design is recommended,
so that such equipment may not violate relevant laws or regulations because of the function of our
products.
(6) When using products for which dry packing is required, observe the conditions (including shelf life
and after-unpacking standby time) agreed upon when specification sheets are individually exchanged.
(7) No part of this material may be reprinted or reproduced by any means without written permission
from our company.
Please read the following notes before using the datasheets
A. These materials are intended as a reference to assist customers with the selection of Panasonic
semiconductor products best suited to their applications.
Due to modification or other reasons, any information contained in this material, such as available
product types, technical data, and so on, is subject to change without notice.
Customers are advised to contact our semiconductor sales office and obtain the latest information
before starting precise technical research and/or purchasing activities.
B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but
there is always the possibility that further rectifications will be required in the future. Therefore,
Panasonic will not assume any liability for any damages arising from any errors etc. that may ap-
pear in this material.
C. These materials are solely intended for a customer's individual use.
Therefore, without the prior written approval of Panasonic, any other use such as reproducing,
selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited.
2001 MAR
相关型号：
©2020 ICPDF网 联系我们和版权申明