PS-55JS1-015H1 [ETC]

Analog IC ; 模拟IC\n


型号：	PS-55JS1-015H1
厂家：	ETC
描述：	Analog IC 模拟IC\n 模拟IC
文件：	总4页 (文件大小：64K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

PS-55J01 SERIES

28 VIN DC/DC CONVERTERS - 50 Watt Single Output

- 50 Watt Dual Output

LOGITEK^

A Subsidiary of NAI, Inc.

Features

• High Power Density, Low Profile Packaging

• Full Output Power at +100°C Baseplate Temperature

• Switching Power Supply – Low Noise

• ESS Screening (Burn-In) and Temperature Cycling

• Designed and Manufactured Per NAVMAT Guidelines

• Full-Mil and COTS-Mil-Type Versions (form, fit, and function identical)

• EMI Filtering Designed to MIL-STD-461C

• Remote Error Sensing

• Remote Digital (TTL) Turn On/Off

• Transient Protection per MIL-STD-704D

Contents

Description

Specifications............................................ 1

Electrical................................................. 1

Physical/Environmental.......................... 2

Output Power (Table 1) ............................ 2

Pinout Designations (J1) (Table 2)........... 2

Connector Specifications ........................... 2

Output Wiring Diagram............................. 3

Mechanical Layout.................................... 3

Mechanical Dimensions (Table 3) ............ 4

Ordering Information................................ 4

Logitek's PS-55 Series is a family of high power density, low pro-

file, 28 VIN DC/DC switch mode converters. This family extends

from 25 Watt through 150 Watt in single, dual, and triple configura-

tions. The PS-55 Series is ideally suited for airborne, shipboard,

ground mobile and C³I applications. All Logitek DC/DC Converters

and Power Supplies are designed and qualified to the most stringent

performance and environmental requirements. Full-Mil units receive

ESS Screening, including burn-in and temperature cycling.

Electrical Specifications

DC Input Characteristics:

Input

16 to 36 VDC; 40 VDC maximum with no damage (50 VDC maximum – Optional)

EMI/RFI Characteristics

Input Transient Protection

Designed to meet the requirements of MIL-STD-461C

Per MIL-STD-704D and MIL-STD-461C, CS06

DC Output Characteristics:

Output Power

50 Watts, See Table 1

Output Voltage

Efficiency

5 VDC to 28 VDC, See Table 1

72% minimum

Line Regulation

Load Regulation

PARD (Noise and Ripple)

Within 0.1% for low to high line changes at constant load

0.1% for 0 to 100% of rated load at nominal input line

50 mV p-p typical; 100 mV p-p maximum for 5V outputs (20 MHz bandwidth); 1% of the

output voltage, with a maximum of 200 mV p-p, for all other outputs (20 MHz bandwidth)

Load Transient Recovery

Output voltage returns to regulation limits within 0.5 msec (typical), half to full load

Load Transient Under/Overshoot

0.35 Volt maximum from nominal output voltage set point for 3.3 V and 5.0 V outputs, all

other outputs are 5%.

LOGITEK, A Subsidiary of NAI, Inc.

170 Wilbur Place, Bohemia, NY 11716

631.567.1100 / 631.567.1823 (Fax)

www.naii.com e-mail: sales@naii.com

55J01A001

Rev. B 1.0

Page 1 of 4

DC Output Characteristics (Continued):

Short Circuit Protection

Under any short circuit condition, output voltage drops to less than 1 volt, with automatic recovery

Current Limiting

120% ±10% typical

OverVoltage Protection

Remote Error Sensing

Remote Turn On/Off

Isolation Voltage

Automatic electronic shutdown if voltage exceeds 125% ±10%

Compensates for up to 0.5-volt drop on output leads

TTL logic 1 inhibits (turns off) the output; a floating input acts as a logic 0 (output on)

500 VDC input to output and input to case; 100 VDC output to case.

50 Megohm at 50 VDC

Insulation Resistance

Physical/Environmental Specifications

Temperature Range

Operating: -55°C to +100°C at 100% load (Temperature measured at baseplate; conduction

via baseplate only); Storage: -55°C to +125°C

Temperature Coefficient

Shock

0.01% per °C

30 G’s each axis, per MIL-STD-810C, Method 516.2, Procedure 1. Hammer shock per

MIL-S-901C

Acceleration

Vibration

Reliability

Humidity

Altitude

6 G’s per MIL-STD-810C, Method 513.2, Procedure 11, and 14 G’s per Procedure 1

Per MIL-STD-810C, Method 514.2, Procedure 1A

(MTBF) 200,000 hours, ground benign, at 50°C baseplate

95% at 71°C per MIL-STD-810C, Method 507.1 (non-condensing)

40,000 feet per MIL-STD-810C, Method 504.1, Category 6 Equipment

See Table 3

Dimensions

Salt Fog

Per MIL-STD-810C, Method 509.1

Sand/Dust/Fungus

Enclosure

Finish

Per MIL-STD-810C

Aluminum housing to aluminum baseplate

Cover: Black anodized; Baseplate: chemfilm

Interface

Connections via a D-subminiature connector per Page 2 of this Data Sheet

Single Output = 9 ounces; Dual Output = 10 ounces

Weight

Table 1. Output Power

Table 2. Pinout Designations (J1)

Single

Dual

Single

+INPUT

-TTL (ON/OFF)

Dual

-INPUT

Single

-INPUT

CHAS GND CHAS GND

+SENSE

-SENSE

+OUTPUT

-OUTPUT

Dual

+INPUT

N/C

Volts Amps Volts Amps

5.0

6.5

12.0

15.0

24.0

28.0

10.0

7.6

4.2

3.4

2.1

1.8

5.0

2.1

1.7

N/C

±5.0

±12.0

±15.0

-TTL (ON/OFF)

+TTL (ON/OFF)

-SENSE 1

-OUTPUT 1

-SENSE 2

+OUTPUT

-OUTPUT

+SENSE 1

+OUTPUT 1

+SENSE 2

-OUTPUT 2

+OUTPUT 2

Connector Specifications

Connector

Part Number - Series

DAMME15PR

Unit Connector

Mating Connector

DAMM15S

LOGITEK, A Subsidiary of NAI, Inc.

170 Wilbur Place, Bohemia, NY 11716

631.567.1100 / 631.567.1823 (Fax)

www.naii.com e-mail: sales@naii.com

55J01A001

Rev. B 1.0

Page 2 of 4

Output – Wiring Diagram

Single Output

(HIGH)

+OUT

+INPUT

-INPUT

DC INPUT

(RETURN)

+SENSE

-SENSE

LOAD

-OUT

+TTL

-TTL

ON/OFF CONTROL

CHASSIS GROUND

Dual Output

+OUT 1

+SENSE 1

-SENSE 1

LOAD

(HIGH)

DC INPUT

(RETURN)

-OUT 1

+OUT 2

+INPUT

-INPUT

+SENSE 2

-SENSE 2

+TTL

-TTL

ON/OFF CONTROL

-OUT 2

CHASSIS GROUND

Mechanical Layout

4 – 40 UNC-2B x 0.25 DEEP

TYPICAL 4 PLACES

PIN 1

TOP

BOTTOM

Mechanical Dimensions – See Table 3 (following)

LOGITEK, A Subsidiary of NAI, Inc.

170 Wilbur Place, Bohemia, NY 11716

631.567.1100 / 631.567.1823 (Fax)

www.naii.com e-mail: sales@naii.com

55J01A001

Rev. B 1.0

Page 3 of 4

Table 3. Mechanical Dimensions

Case*

Units

Inches

2.5

3.5

2.100

53.34

2.600

66.04

3.100

78.74

3.450

87.63

1.25

31.8

1.50

38.1

63.5

3.00

76.20

88.9

3.85

97.79

Inches

*Use Case 1 for Single Output Converter; Use Case 2 for Dual Output Converter

Notes

Dimensions C & D: 0.2” (5.1 mm)

Dimension E: 0.23” (5.84 mm)

Dimension G: 0.455” (11.56 mm)

Dimension H: 0.8” (20.3 mm)

Ordering Information for PS-55J01 Series (50 Watt DC/DC Converter)

55 J D1 - 005 H 0 - XX

CODE (Used only for “Specials”)

OPTIONS: 0 = Standard Testing (Includes ESS Temperature Cycling per NAVMAT)

1 = Standard Testing plus ESS Vibration Testing (per NAVMAT)

RELIABILITY:

H = Full-Mil: -55°C to +100°C, Hi-Rel Mil Grade Components, Designed to meet the require-

ments of MIL-STD-461C, Designed to meet the requirements of MIL-STD-810C, Designed

per NAVMAT Guidelines.

M = COTS-Mil-Type: -55°C to +100°C, Mil-Type Components, Designed to meet the

Requirements of MIL-STD-461C, Designed to meet the requirements of MIL-STD-810C,

Designed per NAVMAT Guidelines.

OUTPUT VOLTAGE(s): Single Output

Dual Output

005 = ±5 V

012 = ±12 V

015 = ±15 V

005 = 5 V

006 = 6.5 V

012 = 12V

015 = 15 V

024 = 14 V

028 = 28 V

000 = Special Voltage –

See Code Table Below

OUTPUTS: S1 = Single

D1 = Dual

WATTAGE: J = 50 W

SERIES: 55 = DC/DC (Low Voltage)

Example: 55JS1-005H1 = DC /DC (Low Voltage); 50 Watt; Single Output; +5 V; Full-Mil-Type; ESS Vibration Testing

55JD1-012M0 = DC /DC (Low Voltage); 50 Watt; Dual Output; ±12 V; COTS-Mil-Type; Standard Testing

Consult Factory for Additional Options and/or Special Units

Code Table for “Specials”

Code Table for Special Voltages (Where Applicable)

LOGITEK, A Subsidiary of NAI, Inc.

170 Wilbur Place, Bohemia, NY 11716

631.567.1100 / 631.567.1823 (Fax)

www.naii.com e-mail: sales@naii.com

55J01A001

Rev. B 1.0

Page 4 of 4

相关型号：