首页 |元器件品牌

RP30-4815DFW/N [ETC]

CONV DC/DC 30W 18-75VIN +/-15V;
RP30-4815DFW/N
型号： RP30-4815DFW/N
厂家： ETC    ETC
描述：

CONV DC/DC 30W 18-75VIN +/-15V
文件： 总8页 (文件大小：485K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
• Wide 4:1 input voltage range  
• 1.6kVDC isolation  
Features  
DC/DC Converter  
• UL certified  
• Efficiency up to 91%  
• Six-sided continuous shield  
• No minimum load required  
Regulated  
Converter  
RP30-FW  
Description  
30 Watt  
2“ x 1“  
Single and Dual  
Output  
The RP30-FW series DC/DC converters are designed to meet to UL 60950-1 and to cUL 60950-1.  
This makes them ideal for all telecom and industrial applications where approved safety standards  
are required. The industry standard 2” x 1” package meets military standards for thermal shock and  
vibration tolerance.  
Selection Guide  
Part Number  
Input  
Output  
Output  
Current  
[mA]  
Input (1) Efficiency (1) Max. Capacitive  
Voltage Range Voltage  
Current  
[mA]  
typ.  
[%]  
Load (2)  
[µF]  
[VDC]  
9-36  
9-36  
9-36  
9-36  
18-75  
18-75  
18-75  
18-75  
9-36  
9-36  
9-36  
18-75  
18-75  
18-75  
[VDC]  
3.3  
5
12  
15  
3.3  
5
12  
15  
5
12  
15  
5
RP30-243.3SFW (3,4)  
RP30-2405SFW (3,4)  
RP30-2412SFW (3,4)  
RP30-2415SFW (3,4)  
RP30-483.3SFW (3,4)  
RP30-4805SFW (3,4)  
RP30-4812SFW (3,4)  
RP30-4815SFW (3,4)  
RP30-2405DFW (3,4)  
RP30-2412DFW (3,4)  
RP30-2415DFW (3,4)  
RP30-4805DFW (3,4)  
RP30-4812DFW (3,4)  
RP30-4815DFW (3,4)  
7500  
6000  
2500  
2000  
7500  
6000  
2500  
2000  
3000  
1250  
1000  
3000  
1250  
1000  
1199  
1420  
1404  
1404  
600  
710  
694  
687  
1420  
1437  
1437  
710  
710  
710  
86  
88  
89  
89  
86  
88  
90  
91  
88  
87  
87  
88  
88  
88  
20000  
14400  
3000  
2000  
20000  
14400  
3000  
2000  
3000  
2000  
1300  
3000  
2000  
1300  
E196683  
12  
15  
Notes:  
Note1: Maximum values at nominal input voltage and full load  
Note2: Max. Cap load is tested at minimum input and constant resistive load  
UL60950-1 certified  
EN55032 compliant  
Model Numbering  
RP30-__ __ _FW/_ _  
(4)  
nom. Input Voltage  
“Package  
”
(3)  
Output Voltage  
“CTRL Logic  
”
Single or Dual  
Notes:  
Note3: no suffix for CTRL function with positive logic (1=ON, 0=OFF)  
add suffix “N” for CTRL function with negative logic (0=ON, 1=OFF)  
Note4: add suffix “-HC” for premounted Heat-sink with clips  
Ordering Examples  
RP30-2405SFW = 24V input, 5V output, single, positive Logic CTRL pin  
RP30-4812DFW/N-HC = 48V input, 12V output, dual, negative Logic CTRL pin, Heat-sink premounted  
www.recom-power.com  
REV.: 3/2019  
PD-1  
RP30-FW  
DC/DC Converter  
Specifications (measured @ Ta= 25°C, nom. Vin, full load unless otherwise stated)  
Series  
BASIC CHARACTERISTICS  
Parameter  
Condition  
Min.  
Typ.  
Max.  
Input Filter  
Pi-Type  
nom. Vin = 24VDC  
nom. Vin = 48VDC  
9VDC  
18VDC  
24VDC  
48VDC  
36VDC  
75VDC  
Input Voltage Range  
Input Surge Voltage  
nom. Vin = 24VDC  
nom. Vin = 48VDC  
50VDC  
100VDC  
100ms max.  
DC-DC ON  
DC-DC OFF  
9VDC  
18VDC  
+10%  
nom. Vin = 24VDC  
nom. Vin = 48VDC  
8VDC  
Under Voltage Lockout (UVLO)  
DC-DC ON  
DC-DC OFF  
16VDC  
Output Voltage Trimming  
Input Reflected Ripple Current (5)  
Minimum Load  
refer to “OUTPUT VOLTAGE TRIMMING”  
-10%  
0%  
20mAp-p  
Power up  
ON/OFF CTRL  
30ms  
30ms  
Start-up Time  
V
DC-DC ON  
DC-DC OFF  
Open or 3.0VDC < CTRL< 12VDC  
Positive Logic  
Negative Logic  
V
Short or 0VDC < CTRL< 1.2VDC  
V
Short or 0VDC < CTRL< 1.2VDC  
ON/OFF CTRL (6)  
DC-DC ON  
DC-DC OFF  
V
Open or 3.0VDC < CTRL< 12VDC  
DC-DC ON  
DC-DC OFF  
-0.5mA  
387kHz  
+0.5mA  
3mA  
Input Current of CTRL pin  
Standby Current  
Internal Operating Frequency  
430kHz  
473kHz  
measured at 20MHz BW  
with a 1µF/50V MLCC  
3.3Vout, 5Vout  
12Vout, 15Vout  
100mVp-p  
150mVp-p  
Ripple and Noise  
Notes:  
Note5: Simulated source impedance of 12µH. 12µH inductor in series with +Vin  
Note6: The ON/OFF control function can be positive or negative logic. The pin voltage is referenced to -Vin pin  
RP30-2405SFW  
Efficiency vs. Input Voltage full load  
Efficiency vs. Output Current  
95  
90  
ꢃ5  
ꢃ0  
ꢂ5  
ꢂ0  
65  
60  
55  
50  
ꢁ5  
95  
90  
ꢀ5  
ꢀ0  
ꢁ5  
ꢁ0  
65  
9ꢀin  
2ꢁꢀin  
36ꢀin  
ꢁ0  
10  
1ꢀ  
20  
22  
2ꢂ  
26  
2ꢀ  
30  
32  
3ꢂ  
36  
20  
30  
ꢁ0  
50  
60  
ꢂ0  
ꢃ0  
90  
100  
Output Current [%]  
Input Voltage [VDC]  
continued on next page  
REV.: 3/2019  
www.recom-power.com  
PD-2  
RP30-FW  
DC/DC Converter  
Specifications (measured @ Ta= 25°C, nom. Vin, full load unless otherwise stated)  
Series  
RP30-4805SFW  
Efficiency vs. Output Current  
Efficiency vs. Input Voltage full load  
95  
95  
90  
ꢁ5  
ꢁ0  
ꢀ5  
ꢀ0  
65  
90  
ꢀ5  
ꢀ0  
ꢃ5  
ꢃ0  
65  
60  
55  
1ꢀꢁin  
ꢂꢀꢁin  
ꢃ5ꢁin  
50  
ꢂ5  
ꢂ0  
ꢂ0  
10  
20  
30  
50  
60  
ꢃ0  
ꢀ0  
90  
100  
36  
ꢂ0  
ꢂꢂ  
ꢂꢁ  
52  
56  
60  
6ꢂ  
6ꢁ  
ꢀ2  
ꢀ5  
Output Current [%]  
Input Voltage [VDC]  
OUTPUT VOLTAGE TRIMMING  
Output Voltage Trimming  
Single output Powerline converters offer the feature of trimming the output voltage over a certain range around the nominal value by using external  
trim resistors. No general equation can be given for calculating the trim resistors, but the following trimtables give typical values for choosing these  
trimming resistors. If voltages between the given trim points are required, extrapolate between the two nearest given values to work out the resistor  
required or use a variable resistor to set the output voltage. Output can be externally trimmed by using the method shown below.  
Trim up  
Trim down  
Trim  
Trim  
R
R
D
U
-Vout  
+Vout  
RP30-xx3.3SFW  
[%]  
[VDC]  
[kW]  
Trim up  
Vout =  
RU =  
1
2
3
4
5
6
7
8
9
10  
3.333  
57.93  
3.366  
26.16  
3.399  
15.58  
3.432  
10.28  
3.465  
7.11  
3.498  
4.99  
3.531  
3.48  
3.564  
2.34  
3.597  
1.46  
3.63  
0.75  
[%]  
[VDC]  
[kW]  
Trim down  
Vout =  
RD =  
1
2
3
4
5
6
7
8
9
10  
3.267  
69.47  
3.234  
31.23  
3.201  
18.49  
3.168  
12.12  
3.135  
8.29  
3.102  
5.74  
3.069  
3.92  
3.036  
2.56  
3.003  
1.50  
2.97  
0.65  
RP30-xx05SFW  
[%]  
[VDC]  
[kW]  
Trim up  
Vout =  
RU =  
1
2
3
4
5
6
7
8
9
10  
5.05  
5.01  
16.58  
5.15  
9.92  
5.20  
6.58  
5.25  
4.59  
5.30  
3.25  
5.35  
2.30  
5.4  
5.45  
1.03  
5.50  
0.59  
36.57  
1.59  
[%]  
[VDC]  
[kW]  
Trim down  
Vout =  
RD =  
1
2
3
4
5
6
7
8
9
10  
4.95  
45.53  
4.90  
20.61  
4.85  
12.31  
4.80  
8.15  
4.75  
5.66  
4.70  
4.00  
4.65  
2.81  
4.60  
1.92  
4.55  
1.23  
4.50  
0.68  
continued on next page  
REV.: 3/2019  
www.recom-power.com  
PD-3  
RP30-FW  
DC/DC Converter  
Specifications (measured @ Ta= 25°C, nom. Vin, full load unless otherwise stated)  
Series  
RP30-xx12SFW  
[%]  
[VDC]  
[kW]  
Trim up  
Vout =  
RU =  
1
2
3
4
5
6
7
8
9
10  
12.12  
367.91  
12.24  
165.95  
12.36  
98.64  
12.48  
64.98  
12.60  
44.78  
12.72  
31.32  
12.84  
21.70  
12.96  
14.49  
13.08  
8.88  
13.20  
4.39  
[%]  
[VDC]  
[kW]  
Trim down  
Vout =  
RD =  
1
2
3
4
5
6
7
8
9
10  
11.88  
460.99  
11.76  
207.95  
11.64  
123.60  
11.52  
81.42  
11.40  
56.12  
11.28  
39.25  
11.16  
27.20  
11.04  
18.16  
10.92  
11.13  
10.8  
5.51  
RP30-xx15SFW  
[%]  
[VDC]  
[kW]  
Trim up  
Vout =  
RU =  
1
2
3
4
5
6
7
8
9
10  
15.15  
15.3  
15.45  
106.06  
15.60  
68.80  
15.75  
46.44  
15.90  
31.53  
16.05  
20.88  
16.20  
12.90  
16.35  
6.69  
16.50  
1.72  
404.18  
180.59  
[%]  
[VDC]  
[kW]  
Trim down  
Vout =  
RD =  
1
2
3
4
5
6
7
8
9
10  
14.85  
499.82  
14.70  
223.41  
14.55  
131.27  
14.40  
85.20  
14.25  
57.56  
14.10  
39.14  
13.95  
25.97  
13.80  
16.10  
13.65  
8.42  
13.50  
2.282  
REGULATIONS  
Parameter  
Condition  
Value  
Output Accuracy  
1.0% max.  
Line Regulation  
low line to high line, full load  
0.2% max.  
Single  
Dual  
0.5%  
1.0%  
Load Regulation  
Cross Regulation  
0% to 100% load  
asymmetrical 25%<>100% load  
25% load step change  
5.0%  
Transient Response Recovery Time  
250µs typ.  
PROTECTIONS  
Parameter  
Condition  
Value  
Short Circuit Protection (SCP)  
continuous, automatic recovery  
3.3Vout  
5Vout  
12Vout  
15Vout  
3.9VDC  
6.2VDC  
15VDC  
18VDC  
Over Voltage Protection (OVP)  
zener diode clamp  
Over Load Protection (OLP)  
% Iout rated  
150% typ.  
115°C typ.  
Over Temperature Protection (OTP)  
I/P to O/P  
I/P to O/P to case  
1.6kVDC/ 1 minute  
1.6kVDC/ 1 minute  
Isolation Voltage(7)  
Isolation Resistance  
Isolation Capacitance  
Viso= 500VDC  
1GW min.  
1500pF max.  
Notes:  
Note7: For repeat Hi-Pot testing, reduce the time and/or the test voltage  
Note8: This power module is not internally fused. An input line fuse must always be used  
www.recom-power.com  
REV.: 3/2019  
PD-4  
RP30-FW  
DC/DC Converter  
Specifications (measured @ Ta= 25°C, nom. Vin, full load unless otherwise stated)  
Series  
ENVIRONMENTAL  
Parameter  
Condition  
Value  
without derating  
with derating  
-40°C to +62°C  
-40°C to +101°C  
Operating Temperature Range  
Maximum Case Temperature  
Temperature Coefficient  
+105°C max.  
0.02%/ꢀ max.  
@ natural convection  
0.1m/s  
without heat-sink  
with heat-sink  
12ꢀ/W  
10ꢀ/W  
Thermal Impedance  
Operating Humidity  
Thermal Shock  
Vibration  
non-condensing  
5% - 95% RH  
according to MIL-STD-810F  
according to MIL-STD-810F  
MIL-HDBꢀ-217F, G.B.  
Bellcore TR-NWT-000332 (9)  
1288 x 103 hours  
3163 x 103 hours  
MTBF  
Derating Graph (10)  
RP30-2412SFW  
RP30-2412SFW-HC  
100  
ꢁ0  
60  
ꢀ0  
20  
0
100  
ꢁ0  
60  
ꢀ0  
20  
0
-ꢀ0 -20  
0
20 ꢀ0  
60  
62  
ꢁ0 100 120  
-ꢀ0 -20  
0
20 ꢀ0  
60  
ꢁ0 100 120  
6ꢁ  
Ambient Temperature [°C]101  
Ambient Temperature [°C]  
Notes:  
Note9: BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment)  
MIL-HDBꢀ-217F, G.B. Notice2 @ TA= 25°C, Full load (Ground, Benign, controlled environment)  
Note10: Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a part-number  
not shown here please contact RECOM Techsupport for detailed information  
SAFETY AND CERTIFICATIONS  
Certificate Type (Safety)  
Condition  
E196683  
Standard  
UL60950-1, 2nd Edition 2011  
CAN/CSA-C22.2 No. 60950-1, 2nd Edition 2011  
Information Technology Equipment, General Requirements for Safety  
EAC  
RU-AT.49.09571  
TP TC 004/2011  
RoHS2  
RoHS-2011/65/EU + AM-2015/863  
EMC Compliance  
Condition  
Standard / Criterion  
Electromagnetic compatibility of multimedia equipment - Emission  
requirements  
with external filter  
(see filter suggestion below)  
EN55032, Class A and B  
Information technology equipment - Immunity characteristics - Limits  
and methods of measurement  
EN55024:2010 + A1:2015  
ESD Electrostatic discharge immunity test  
Air 8kV and Contact 6kV  
IEC61000-4-2:2008, Criteria A  
IEC61000-4-3:2006 + A2:2010, Criteria A  
IEC61000-4-4:2012, Criteria A  
Radiated, radio-frequency, electromagnetic field immunity test  
Fast Transient and Burst Immunity (11)  
10 V/m  
2kV  
Surge Immunity (11)  
1kV  
IEC61000-4-5:2005, Criteria A  
Immunity to conducted disturbances, induced by radio-frequency fields  
10 Vr.m.s  
IEC61000-4-6:2008, Criteria A  
continued on next page  
www.recom-power.com  
REV.: 3/2019  
PD-5  
RP30-FW  
DC/DC Converter  
Specifications (measured @ Ta= 25°C, nom. Vin, full load unless otherwise stated)  
Series  
Notes:  
Note11: An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5  
Recom suggests Nippon chemi-con ꢀY series 24Vin=330µF/50V or 48Vin=220µF/100V  
EMC Filtering Suggestions according to EN55032  
Single  
Dual  
C2  
C2  
F1  
F1  
+Vin  
-Vin  
+Vout  
+Vin  
-Vin  
+Vout  
+Vin  
-Vin  
+Vout  
+Vin  
-Vin  
+Vout  
C1  
C1  
Trim  
-Vout  
Com  
-Vout  
-Vout  
-Vout  
C3  
C4  
C3  
C4  
Component List Class A  
MODEL  
C1  
C2  
C3/C4  
RP30-24xxSFW  
RP30-24xxDFW  
4.7µF/50V  
1812 MLCC  
1000pF/2kV  
1808 MLCC  
1000pF/2kV  
1808 MLCC  
RP30-48xxSFW  
RP30-48xxDFW  
2.2µF/100V  
1812 MLCC  
1000pF/2kV  
1808 MLCC  
1000pF/2kV  
1808 MLCC  
Single  
Dual  
C4  
C4  
L1  
L2  
L1  
L2  
F1  
F1  
+Vin  
-Vin  
+Vout  
+Vin  
-Vin  
+Vout  
+Vin  
-Vin  
+Vout  
+Vin  
+Vout  
C1  
C2  
C3  
C1  
C2  
C3  
Trim  
-Vout  
Com  
-Vout  
-Vin  
-Vout  
-Vout  
C5  
C6  
C5  
C6  
Component List Class B  
MODEL  
C1/C2/C3  
C4/C5/C6  
L1  
L2  
RP30-24xxSFW  
RP30-24xxDFW  
4.7µF/50V  
1812 MLCC  
1000pF/2kV  
1808 MLCC  
CMC: 33.3µH  
ref.: WE 744842932 ref.: CMC-09  
CMC: 55µH  
ref.: WE 744290560 ref.: CMC-10  
RP30-48xxSFW  
RP30-48xxDFW  
2.2µF/100V  
1812 MLCC  
1000pF/2kV  
1808 MLCC  
CMC: 33.3µH  
ref.: WE 744842932 ref.: CMC-09  
CMC: 55µH  
ref.: WE 744290560 ref.: CMC-10  
DIMENSIONS and PHYSICAL CHARACTERISTICS  
Parameter  
Type  
case  
base  
Value  
nickel coated copper  
FR4 PCB  
Material  
potting  
epoxy (UL94V-0)  
without Heat-sink  
with Heat-sink  
50.8 x 25.4 x 10.2mm  
56.8 x 25.4 x 16.8mm  
Dimensions (LxWxH)  
Weight  
without Heat-sink  
with Heat-sink  
30.5g  
41.39g  
continued on next page  
REV.: 3/2019  
www.recom-power.com  
PD-6  
RP30-FW  
DC/DC Converter  
Specifications (measured @ Ta= 25°C, nom. Vin, full load unless otherwise stated)  
Series  
Dimension Drawing (mm)  
Pinning Information  
Pin #  
Single  
+Vin  
-Vin  
Dual  
+Vin  
-Vin  
1
2
3
4
5
6
CTRL(3) CTRL(3)  
+Vout  
-Vout  
Trim  
+Vout  
Com  
50.ꢁ  
25.ꢂ  
-Vout  
Tolerance: xx.x= 0.ꢀ55  
xx.xx= 0.ꢁꢀ55  
0.1  
1ꢁ x 2.5ꢂꢃ ꢂ5.ꢄ2  
2.5ꢂ  
ꢀ 1.0  
Recommended Footprint Details  
2.5ꢂ  
4
5
6
6
5
4
1
2
3
Bottom View  
Top View  
2
1
3
Dimension Drawing with Heat-sink (mm)  
50.ꢁ  
Top View  
Heat-sink  
56.ꢁ  
2ꢂ.2  
0.1  
1ꢁ x 2.5ꢂꢃ ꢂ5.ꢄ2  
2.5ꢂ  
ꢀ 1.0  
Recommended Footprint Details  
2.5ꢂ  
4
5
6
6
5
4
1
3
2
Bottom View  
Top View  
2
1
3
www.recom-power.com  
REV.: 3/2019  
PD-7  
RP30-FW  
DC/DC Converter  
Specifications (measured @ Ta= 25°C, nom. Vin, full load unless otherwise stated)  
Series  
PACKAGING INFORMATION  
Parameter  
Type  
Value  
tube  
tray  
without heat-sink  
with heat-sink  
255.0 x 54.0 x 22.0mm  
302.5 x 222.0 x 20.0mm  
Packaging Dimension (LxWxH)  
tube  
tray  
without heat-sink  
with heat-sink  
9pcs  
20pcs  
Packaging Quantity  
Storage Temperature Range  
Storage Humidity  
-55°C to +125°C  
5% - 95% RH  
non-condensing  
The product information and specifications may be subꢀect to changes even without prior written notice.The product has been designed for various applicationsꢁ its suitability lies in the responsibility of each customer. The  
products are not authorized for use in safety-critical applications without RECOMꢂs explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or cause  
loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized  
use of RECOM products in such safety-critical applications.  
www.recom-power.com  
REV.: 3/2019  
PD-8  

相关型号：

SI9130DB

 5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

 Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

 500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明